# forwarding_if_rx Test1
# Test1 tests the case when bfd is only enabled on one end of the link.
-# Under this situation, the bfd state should be DOWN and the forwarding
-# flag should be FALSE by default. However, if forwarding_if_rx is
-# enabled, as long as there is packet received, the bfd forwarding flag
-# should be TRUE.
+# Under this situation, the forwarding flag should always be false, even
+# though there is data packet received, since there is no bfd control
+# packet received during the demand_rx_bfd interval.
AT_SETUP([bfd - bfd forwarding_if_rx - bfd on one side])
OVS_VSWITCHD_START([add-br br1 -- set bridge br1 datapath-type=dummy -- \
add-port br1 p1 -- set Interface p1 type=patch \
AT_CHECK([ovs-ofctl packet-out br1 3 2 "90e2ba01475000101856b2e80806000108000604000100101856b2e80202020300000000000002020202"],
[0], [stdout], [])
done
-# the forwarding flag should be true, since there is data received.
-BFD_CHECK([p0], [true], [false], [none], [down], [No Diagnostic], [none], [down], [No Diagnostic])
-
-# reset bfd forwarding_if_rx.
-AT_CHECK([ovs-vsctl set Interface p0 bfd:forwarding_if_rx=false], [0])
-# forwarding flag should turn to false since the STATE is DOWN.
+# the forwarding flag should be false, due to the demand_rx_bfd.
BFD_CHECK([p0], [false], [false], [none], [down], [No Diagnostic], [none], [down], [No Diagnostic])
-BFD_CHECK_TX([p0], [1000ms], [1000ms], [0ms])
-BFD_CHECK_RX([p0], [500ms], [500ms], [1ms])
AT_CHECK([ovs-vsctl del-br br1], [0], [ignore])
AT_CLEANUP
AT_CHECK([ovs-vsctl del-br br1], [0], [ignore])
AT_CLEANUP
+# forwarding_if_rx Test4
+# Test4 is for testing the demand_rx_bfd feature.
+# bfd is enabled on both ends of the link.
+AT_SETUP([bfd - bfd forwarding_if_rx - demand_rx_bfd])
+OVS_VSWITCHD_START([add-br br1 -- set bridge br1 datapath-type=dummy -- \
+ add-port br1 p1 -- set Interface p1 type=patch \
+ options:peer=p0 ofport_request=2 -- \
+ add-port br0 p0 -- set Interface p0 type=patch \
+ options:peer=p1 ofport_request=1 -- \
+ set Interface p0 bfd:enable=true bfd:min_tx=300 bfd:min_rx=300 bfd:forwarding_if_rx=true -- \
+ set Interface p1 bfd:enable=true bfd:min_tx=500 bfd:min_rx=500])
+
+ovs-appctl time/stop
+# advance the clock, to stablize the states.
+for i in `seq 0 19`; do ovs-appctl time/warp 500; done
+BFD_CHECK([p0], [true], [false], [none], [up], [No Diagnostic], [none], [up], [No Diagnostic])
+BFD_CHECK([p1], [true], [false], [none], [up], [No Diagnostic], [none], [up], [No Diagnostic])
+BFD_CHECK_TX([p0], [500ms], [300ms], [500ms])
+
+# disable the bfd on p1.
+AT_CHECK([ovs-vsctl set Interface p1 bfd:enable=false], [0])
+
+# advance clock by 4000ms, while receiving packets.
+# the STATE should go DOWN, due to Control Detection Time Expired.
+# but forwarding flag should be still true.
+for i in `seq 0 7`
+do
+ ovs-appctl time/warp 500
+ AT_CHECK([ovs-ofctl packet-out br1 3 2 "90e2ba01475000101856b2e80806000108000604000100101856b2e80202020300000000000002020202"],
+ [0], [stdout], [])
+done
+BFD_CHECK([p0], [true], [false], [none], [down], [Control Detection Time Expired], [none], [down], [No Diagnostic])
+
+# advance clock long enough to trigger the demand_bfd_rx interval
+# (100 * bfd->cfm_min_rx), forwarding flag should go down since there
+# is no bfd control packet received during the demand_rx_bfd.
+for i in `seq 0 120`
+do
+ ovs-appctl time/warp 300
+ AT_CHECK([ovs-ofctl packet-out br1 3 2 "90e2ba01475000101856b2e80806000108000604000100101856b2e80202020300000000000002020202"],
+ [0], [stdout], [])
+done
+BFD_CHECK([p0], [false], [false], [none], [down], [Control Detection Time Expired], [none], [down], [No Diagnostic])
+
+# now enable the bfd on p1 again.
+AT_CHECK([ovs-vsctl set Interface p1 bfd:enable=true], [0])
+# advance clock by 5000ms. and p1 and p0 should be all up.
+for i in `seq 0 9`; do ovs-appctl time/warp 500; done
+BFD_CHECK([p0], [true], [false], [none], [up], [Control Detection Time Expired], [none], [up], [No Diagnostic])
+BFD_CHECK([p1], [true], [false], [none], [up], [No Diagnostic], [none], [up], [Control Detection Time Expired])
+BFD_CHECK_TX([p0], [500ms], [300ms], [500ms])
+
+# disable the bfd on p1 again.
+AT_CHECK([ovs-vsctl set Interface p1 bfd:enable=false], [0])
+# advance clock long enough to trigger the demand_rx_bfd,
+# forwarding flag should go down since there is no bfd control packet
+# received during the demand_rx_bfd.
+for i in `seq 0 120`
+do
+ ovs-appctl time/warp 300
+ AT_CHECK([ovs-ofctl packet-out br1 3 2 "90e2ba01475000101856b2e80806000108000604000100101856b2e80202020300000000000002020202"],
+ [0], [stdout], [])
+done
+BFD_CHECK([p0], [false], [false], [none], [down], [Control Detection Time Expired], [none], [down], [No Diagnostic])
+
+AT_CHECK([ovs-vsctl del-br br1], [0], [ignore])
+AT_CLEANUP
+
# test bfd:flap_count.
# This test contains three part:
# part 1. tests the flap_count on normal bfd monitored link.
# Part-3 now turn on forwarding_if_rx.
AT_CHECK([ovs-vsctl set Interface p0 bfd:forwarding_if_rx=true], [0])
+for i in `seq 0 10`; do ovs-appctl time/warp 100; done
# disable the bfd on p1.
AT_CHECK([ovs-vsctl set Interface p1 bfd:enable=false], [0])
# flap_count should remain unchanged.
BFD_VSCTL_LIST_IFACE([p0], ["s/^.*flap_count=\(.*\), forwarding.*$/\1/p"], ["5"])
-# stop the traffic for 4000ms, the forwarding flag of p0 should turn false.
+# stop the traffic for more than 100 * bfd->cfm_min_rx ms, the forwarding flag of p0 should turn false.
# and there should be the increment of flap_count.
-for i in `seq 0 7`; do ovs-appctl time/warp 500; done
+for i in `seq 0 120`; do ovs-appctl time/warp 100; done
BFD_CHECK([p0], [false], [false], [none], [down], [Control Detection Time Expired], [none], [down], [No Diagnostic])
BFD_VSCTL_LIST_IFACE([p0], ["s/^.*flap_count=\(.*\), forwarding.*$/\1/p"], ["6"])
AT_CHECK([ovs-ofctl packet-out br1 3 2 "90e2ba01475000101856b2e80806000108000604000100101856b2e80202020300000000000002020202"],
[0], [stdout], [])
done
-BFD_CHECK([p0], [true], [false], [none], [down], [Control Detection Time Expired], [none], [down], [No Diagnostic])
-# flap_count should be incremented again.
-BFD_VSCTL_LIST_IFACE([p0], ["s/^.*flap_count=\(.*\), forwarding.*$/\1/p"], ["7"])
-
-# stop the traffic for 4000ms, the forwarding flag of p0 should turn false.
-# and there should be the increment of flap_count.
-for i in `seq 0 7`; do ovs-appctl time/warp 500; done
+# forwarding should be false, since there is still no bfd control packet received.
BFD_CHECK([p0], [false], [false], [none], [down], [Control Detection Time Expired], [none], [down], [No Diagnostic])
-BFD_VSCTL_LIST_IFACE([p0], ["s/^.*flap_count=\(.*\), forwarding.*$/\1/p"], ["8"])
+BFD_VSCTL_LIST_IFACE([p0], ["s/^.*flap_count=\(.*\), forwarding.*$/\1/p"], ["6"])
# turn on the bfd on p1.
AT_CHECK([ovs-vsctl set interface p1 bfd:enable=true])
for i in `seq 0 49`; do ovs-appctl time/warp 100; done
# even though there is no data traffic, since p1 bfd is on again, should increment the flap_count.
-BFD_VSCTL_LIST_IFACE([p0], ["s/^.*flap_count=\(.*\), forwarding.*$/\1/p"], ["9"])
+BFD_VSCTL_LIST_IFACE([p0], ["s/^.*flap_count=\(.*\), forwarding.*$/\1/p"], ["7"])
BFD_VSCTL_LIST_IFACE([p1], ["s/^.*flap_count=\(.*\), forwarding.*$/\1/p"], ["1"])
OVS_VSWITCHD_STOP
git://git.onelab.eu / sliver-openvswitch.git / blobdiff