[add-port br0 p1 -- set Interface p1 type=dummy --\
add-port br0 p2 -- set Interface p2 type=dummy])
-AT_CHECK(
- [ovs-vsctl \
- -- get Interface p1 ofport \
- -- get Interface p2 ofport],
- [0], [stdout])
-set `cat stdout`
-br0=0 p1=$1 p2=$2
-
AT_CHECK([ovs-ofctl add-flow br0 action=normal])
# "in_port" defaults to OFPP_NONE if it's not specified.
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
actual=`tail -1 stdout | sed 's/Datapath actions: //'`
-expected="$br0,$p1,$p2"
-AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected" br0=$br0 p1=$p1 p2=$p2], [0], [stdout])
+expected="0,1,2"
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
mv stdout expout
-AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual" br0=$br0 p1=$p1 p2=$p2], [0], [expout])
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])
OVS_VSWITCHD_STOP
AT_CLEANUP
AT_SETUP([ofproto-dpif - DSCP])
-dnl This test assumes port p1 is allocated OpenFlow port number 1.
OVS_VSWITCHD_START([add-port br0 p1 -- set Interface p1 type=dummy])
AT_DATA([flows.txt], [dnl
actions=output:65534,enqueue:1:1,enqueue:1:2,enqueue:1:2,enqueue:1:1,output:1,mod_nw_tos:0,output:1,output:65534
AT_CLEANUP
AT_SETUP([ofproto-dpif - output/flood flags])
-dnl This test assumes that OpenFlow port numbers are allocated in order
-dnl starting from one. It does not necessarily require that they are allocated
-dnl in the same order that they are named in the database. Just that the
-dnl following command guarantees OpenFlow port 65534, and ports 1-7 exist in
-dnl the bridge.
OVS_VSWITCHD_START([dnl
add-port br0 p1 -- set Interface p1 type=dummy --\
add-port br0 p2 -- set Interface p2 type=dummy --\
set Interface p7 type=dummy -- \
set Interface p8 type=dummy --])
-AT_CHECK(
- [ovs-vsctl \
- -- get Interface p1 ofport \
- -- get Interface p2 ofport \
- -- get Interface p3 ofport \
- -- get Interface p4 ofport \
- -- get Interface p5 ofport \
- -- get Interface p6 ofport \
- -- get Interface p7 ofport \
- -- get Interface p8 ofport],
- [0], [stdout])
-set `cat stdout`
-br0=0 p1=$1 p2=$2 p3=$3 p4=$4 p5=$5 p6=$6 p7=$7 p8=$8
-
-dnl Each of these specifies an in_port, a VLAN VID (or "none"), a VLAN
-dnl PCP (used if the VID isn't "none") and the expected set of datapath
+dnl Each of these specifies an in_port by number, a VLAN VID (or "none"),
+dnl a VLAN PCP (used if the VID isn't "none") and the expected set of datapath
dnl actions.
for tuple in \
- "br0 none 0 drop" \
- "br0 0 0 drop" \
- "br0 0 1 drop" \
- "br0 10 0 p1,p5,p6,p7,p8,pop_vlan,p2" \
- "br0 10 1 p1,p5,p6,p7,p8,pop_vlan,p2" \
- "br0 11 0 p5,p7" \
- "br0 11 1 p5,p7" \
- "br0 12 0 p1,p5,p6,pop_vlan,p3,p4,p7,p8" \
- "br0 12 1 p1,p5,p6,pop_vlan,p4,p7,push_vlan(vid=0,pcp=1),p3,p8" \
- "p1 none 0 drop" \
- "p1 0 0 drop" \
- "p1 0 1 drop" \
- "p1 10 0 br0,p5,p6,p7,p8,pop_vlan,p2" \
- "p1 10 1 br0,p5,p6,p7,p8,pop_vlan,p2" \
- "p1 11 0 drop" \
- "p1 11 1 drop" \
- "p1 12 0 br0,p5,p6,pop_vlan,p3,p4,p7,p8" \
- "p1 12 1 br0,p5,p6,pop_vlan,p4,p7,push_vlan(vid=0,pcp=1),p3,p8" \
- "p2 none 0 push_vlan(vid=10,pcp=0),br0,p1,p5,p6,p7,p8" \
- "p2 0 0 pop_vlan,push_vlan(vid=10,pcp=0),br0,p1,p5,p6,p7,p8" \
- "p2 0 1 pop_vlan,push_vlan(vid=10,pcp=1),br0,p1,p5,p6,p7,p8" \
- "p2 10 0 drop" \
- "p2 10 1 drop" \
- "p2 11 0 drop" \
- "p2 11 1 drop" \
- "p2 12 0 drop" \
- "p2 12 1 drop" \
- "p3 none 0 p4,p7,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p3 0 0 pop_vlan,p4,p7,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p3 0 1 p8,pop_vlan,p4,p7,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
- "p3 10 0 drop" \
- "p3 10 1 drop" \
- "p3 11 0 drop" \
- "p3 11 1 drop" \
- "p3 12 0 drop" \
- "p3 12 1 drop" \
- "p4 none 0 p3,p7,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p4 0 0 pop_vlan,p3,p7,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p4 0 1 p3,p8,pop_vlan,p7,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
- "p4 10 0 drop" \
- "p4 10 1 drop" \
- "p4 11 0 drop" \
- "p4 11 1 drop" \
- "p4 12 0 drop" \
- "p4 12 1 drop" \
- "p5 none 0 p2,push_vlan(vid=10,pcp=0),br0,p1,p6,p7,p8" \
- "p5 0 0 pop_vlan,p2,push_vlan(vid=10,pcp=0),br0,p1,p6,p7,p8" \
- "p5 0 1 pop_vlan,p2,push_vlan(vid=10,pcp=1),br0,p1,p6,p7,p8" \
- "p5 10 0 br0,p1,p6,p7,p8,pop_vlan,p2" \
- "p5 10 1 br0,p1,p6,p7,p8,pop_vlan,p2" \
- "p5 11 0 br0,p7" \
- "p5 11 1 br0,p7" \
- "p5 12 0 br0,p1,p6,pop_vlan,p3,p4,p7,p8" \
- "p5 12 1 br0,p1,p6,pop_vlan,p4,p7,push_vlan(vid=0,pcp=1),p3,p8" \
- "p6 none 0 p2,push_vlan(vid=10,pcp=0),br0,p1,p5,p7,p8" \
- "p6 0 0 pop_vlan,p2,push_vlan(vid=10,pcp=0),br0,p1,p5,p7,p8" \
- "p6 0 1 pop_vlan,p2,push_vlan(vid=10,pcp=1),br0,p1,p5,p7,p8" \
- "p6 10 0 br0,p1,p5,p7,p8,pop_vlan,p2" \
- "p6 10 1 br0,p1,p5,p7,p8,pop_vlan,p2" \
- "p6 11 0 drop" \
- "p6 11 1 drop" \
- "p6 12 0 br0,p1,p5,pop_vlan,p3,p4,p7,p8" \
- "p6 12 1 br0,p1,p5,pop_vlan,p4,p7,push_vlan(vid=0,pcp=1),p3,p8" \
- "p7 none 0 p3,p4,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p7 0 0 pop_vlan,p3,p4,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p7 0 1 p3,p8,pop_vlan,p4,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
- "p7 10 0 br0,p1,p5,p6,p8,pop_vlan,p2" \
- "p7 10 1 br0,p1,p5,p6,p8,pop_vlan,p2" \
- "p7 11 0 br0,p5" \
- "p7 11 1 br0,p5" \
- "p7 12 0 br0,p1,p5,p6,pop_vlan,p3,p4,p8" \
- "p7 12 1 br0,p1,p5,p6,pop_vlan,p4,push_vlan(vid=0,pcp=1),p3,p8" \
- "p8 none 0 p3,p4,p7,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p8 0 0 pop_vlan,p3,p4,p7,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p8 0 1 p3,pop_vlan,p4,p7,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
- "p8 10 0 br0,p1,p5,p6,p7,pop_vlan,p2" \
- "p8 10 1 br0,p1,p5,p6,p7,pop_vlan,p2" \
- "p8 11 0 drop" \
- "p8 11 1 drop" \
- "p8 12 0 br0,p1,p5,p6,pop_vlan,p3,p4,p7" \
- "p8 12 1 br0,p1,p5,p6,pop_vlan,p4,p7,push_vlan(vid=0,pcp=1),p3"
+ "0 none 0 drop" \
+ "0 0 0 drop" \
+ "0 0 1 drop" \
+ "0 10 0 1,5,6,7,8,pop_vlan,2" \
+ "0 10 1 1,5,6,7,8,pop_vlan,2" \
+ "0 11 0 5,7" \
+ "0 11 1 5,7" \
+ "0 12 0 1,5,6,pop_vlan,3,4,7,8" \
+ "0 12 1 1,5,6,pop_vlan,4,7,push_vlan(vid=0,pcp=1),3,8" \
+ "1 none 0 drop" \
+ "1 0 0 drop" \
+ "1 0 1 drop" \
+ "1 10 0 0,5,6,7,8,pop_vlan,2" \
+ "1 10 1 0,5,6,7,8,pop_vlan,2" \
+ "1 11 0 drop" \
+ "1 11 1 drop" \
+ "1 12 0 0,5,6,pop_vlan,3,4,7,8" \
+ "1 12 1 0,5,6,pop_vlan,4,7,push_vlan(vid=0,pcp=1),3,8" \
+ "2 none 0 push_vlan(vid=10,pcp=0),0,1,5,6,7,8" \
+ "2 0 0 pop_vlan,push_vlan(vid=10,pcp=0),0,1,5,6,7,8" \
+ "2 0 1 pop_vlan,push_vlan(vid=10,pcp=1),0,1,5,6,7,8" \
+ "2 10 0 drop" \
+ "2 10 1 drop" \
+ "2 11 0 drop" \
+ "2 11 1 drop" \
+ "2 12 0 drop" \
+ "2 12 1 drop" \
+ "3 none 0 4,7,8,push_vlan(vid=12,pcp=0),0,1,5,6" \
+ "3 0 0 pop_vlan,4,7,8,push_vlan(vid=12,pcp=0),0,1,5,6" \
+ "3 0 1 8,pop_vlan,4,7,push_vlan(vid=12,pcp=1),0,1,5,6" \
+ "3 10 0 drop" \
+ "3 10 1 drop" \
+ "3 11 0 drop" \
+ "3 11 1 drop" \
+ "3 12 0 drop" \
+ "3 12 1 drop" \
+ "4 none 0 3,7,8,push_vlan(vid=12,pcp=0),0,1,5,6" \
+ "4 0 0 pop_vlan,3,7,8,push_vlan(vid=12,pcp=0),0,1,5,6" \
+ "4 0 1 3,8,pop_vlan,7,push_vlan(vid=12,pcp=1),0,1,5,6" \
+ "4 10 0 drop" \
+ "4 10 1 drop" \
+ "4 11 0 drop" \
+ "4 11 1 drop" \
+ "4 12 0 drop" \
+ "4 12 1 drop" \
+ "5 none 0 2,push_vlan(vid=10,pcp=0),0,1,6,7,8" \
+ "5 0 0 pop_vlan,2,push_vlan(vid=10,pcp=0),0,1,6,7,8" \
+ "5 0 1 pop_vlan,2,push_vlan(vid=10,pcp=1),0,1,6,7,8" \
+ "5 10 0 0,1,6,7,8,pop_vlan,2" \
+ "5 10 1 0,1,6,7,8,pop_vlan,2" \
+ "5 11 0 0,7" \
+ "5 11 1 0,7" \
+ "5 12 0 0,1,6,pop_vlan,3,4,7,8" \
+ "5 12 1 0,1,6,pop_vlan,4,7,push_vlan(vid=0,pcp=1),3,8" \
+ "6 none 0 2,push_vlan(vid=10,pcp=0),0,1,5,7,8" \
+ "6 0 0 pop_vlan,2,push_vlan(vid=10,pcp=0),0,1,5,7,8" \
+ "6 0 1 pop_vlan,2,push_vlan(vid=10,pcp=1),0,1,5,7,8" \
+ "6 10 0 0,1,5,7,8,pop_vlan,2" \
+ "6 10 1 0,1,5,7,8,pop_vlan,2" \
+ "6 11 0 drop" \
+ "6 11 1 drop" \
+ "6 12 0 0,1,5,pop_vlan,3,4,7,8" \
+ "6 12 1 0,1,5,pop_vlan,4,7,push_vlan(vid=0,pcp=1),3,8" \
+ "7 none 0 3,4,8,push_vlan(vid=12,pcp=0),0,1,5,6" \
+ "7 0 0 pop_vlan,3,4,8,push_vlan(vid=12,pcp=0),0,1,5,6" \
+ "7 0 1 3,8,pop_vlan,4,push_vlan(vid=12,pcp=1),0,1,5,6" \
+ "7 10 0 0,1,5,6,8,pop_vlan,2" \
+ "7 10 1 0,1,5,6,8,pop_vlan,2" \
+ "7 11 0 0,5" \
+ "7 11 1 0,5" \
+ "7 12 0 0,1,5,6,pop_vlan,3,4,8" \
+ "7 12 1 0,1,5,6,pop_vlan,4,push_vlan(vid=0,pcp=1),3,8" \
+ "8 none 0 3,4,7,push_vlan(vid=12,pcp=0),0,1,5,6" \
+ "8 0 0 pop_vlan,3,4,7,push_vlan(vid=12,pcp=0),0,1,5,6" \
+ "8 0 1 3,pop_vlan,4,7,push_vlan(vid=12,pcp=1),0,1,5,6" \
+ "8 10 0 0,1,5,6,7,pop_vlan,2" \
+ "8 10 1 0,1,5,6,7,pop_vlan,2" \
+ "8 11 0 drop" \
+ "8 11 1 drop" \
+ "8 12 0 0,1,5,6,pop_vlan,3,4,7" \
+ "8 12 1 0,1,5,6,pop_vlan,4,7,push_vlan(vid=0,pcp=1),3"
do
set $tuple
in_port=$1
pcp=$3
expected=$4
- eval n_in_port=\$$in_port
if test $vlan = none; then
- flow="in_port($n_in_port),eth(src=50:54:00:00:00:01,dst=ff:ff:ff:ff:ff:ff),eth_type(0xabcd)"
+ flow="in_port($in_port),eth(src=50:54:00:00:00:01,dst=ff:ff:ff:ff:ff:ff),eth_type(0xabcd)"
else
- flow="in_port($n_in_port),eth(src=50:54:00:00:00:01,dst=ff:ff:ff:ff:ff:ff),eth_type(0x8100),vlan(vid=$vlan,pcp=$pcp),encap(eth_type(0xabcd))"
+ flow="in_port($in_port),eth(src=50:54:00:00:00:01,dst=ff:ff:ff:ff:ff:ff),eth_type(0x8100),vlan(vid=$vlan,pcp=$pcp),encap(eth_type(0xabcd))"
fi
echo "----------------------------------------------------------------------"
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
actual=`tail -1 stdout | sed 's/Datapath actions: //'`
- AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected" br0=$br0 p1=$p1 p2=$p2 p3=$p3 p4=$p4 p5=$p5 p6=$p6 p7=$p7 p8=$p8], [0], [stdout])
+ AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
mv stdout expout
- AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual" br0=$br0 p1=$p1 p2=$p2 p3=$p3 p4=$p4 p5=$p5 p6=$p6 p7=$p7 p8=$p8], [0], [expout])
+ AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])
done
OVS_VSWITCHD_STOP
select_all=true output_port=@p3], [<0>
])
-AT_CHECK(
- [ovs-vsctl \
- -- get Interface p1 ofport \
- -- get Interface p2 ofport \
- -- get Interface p3 ofport],
- [0], [stdout])
-set `cat stdout`
-p1=$1 p2=$2 p3=$3
-
AT_DATA([flows.txt], [dnl
in_port=1 actions=output:2
in_port=2 actions=output:1
])
AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
-flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+flow="in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
AT_CHECK_UNQUOTED([tail -1 stdout], [0],
- [Datapath actions: $p2,$p3
+ [Datapath actions: 2,3
])
-flow="in_port($p2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+flow="in_port(2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
AT_CHECK_UNQUOTED([tail -1 stdout], [0],
- [Datapath actions: $p1,$p3
+ [Datapath actions: 1,3
])
OVS_VSWITCHD_STOP
select_src_port=@p1 output_port=@p3], [<0>
])
-AT_CHECK(
- [ovs-vsctl \
- -- get Interface p1 ofport \
- -- get Interface p2 ofport \
- -- get Interface p3 ofport],
- [0], [stdout])
-set `cat stdout`
-p1=$1 p2=$2 p3=$3
-
AT_DATA([flows.txt], [dnl
in_port=1 actions=output:2
in_port=2 actions=output:1
])
AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
-flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+flow="in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
AT_CHECK_UNQUOTED([tail -1 stdout], [0],
- [Datapath actions: $p2,$p3
+ [Datapath actions: 2,3
])
-flow="in_port($p2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+flow="in_port(2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
AT_CHECK_UNQUOTED([tail -1 stdout], [0],
- [Datapath actions: $p1
+ [Datapath actions: 1
])
OVS_VSWITCHD_STOP
AT_CLEANUP
select_all=true output_port=@p2], [<0>
])
-AT_CHECK(
- [ovs-vsctl \
- -- get Interface p1 ofport \
- -- get Interface p2 ofport],
- [0], [stdout])
-set `cat stdout`
-p1=$1 p2=$2
-
AT_CHECK([ovs-ofctl add-flow br0 action=output:1])
# "in_port" defaults to OFPP_NONE if it's not specified.
flow="eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
AT_CHECK_UNQUOTED([tail -1 stdout], [0],
- [Datapath actions: $p1,$p2
+ [Datapath actions: 1,2
])
OVS_VSWITCHD_STOP
select_dst_port=@p2 output_port=@p3], [<0>
])
-AT_CHECK(
- [ovs-vsctl \
- -- get Interface p1 ofport \
- -- get Interface p2 ofport \
- -- get Interface p3 ofport],
- [0], [stdout])
-set `cat stdout`
-p1=$1 p2=$2 p3=$3
-
AT_DATA([flows.txt], [dnl
in_port=1 actions=output:2
in_port=2 actions=output:1
])
AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
-flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+flow="in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
AT_CHECK_UNQUOTED([tail -1 stdout], [0],
- [Datapath actions: $p2,$p3
+ [Datapath actions: 2,3
])
-flow="in_port($p2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+flow="in_port(2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
AT_CHECK_UNQUOTED([tail -1 stdout], [0],
- [Datapath actions: $p1
+ [Datapath actions: 1
])
OVS_VSWITCHD_STOP
select_all=true select_vlan=11 output_port=@p3], [<0>
])
-AT_CHECK(
- [ovs-vsctl \
- -- get Interface p1 ofport \
- -- get Interface p2 ofport \
- -- get Interface p3 ofport],
- [0], [stdout])
-set `cat stdout`
-p1=$1 p2=$2 p3=$3
-
AT_DATA([flows.txt], [dnl
in_port=1, actions=output:2
])
AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
-flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+flow="in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
AT_CHECK_UNQUOTED([tail -1 stdout], [0],
- [Datapath actions: $p2
+ [Datapath actions: 2
])
-flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x8100),vlan(vid=10,pcp=0),encap(eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0))"
+flow="in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x8100),vlan(vid=10,pcp=0),encap(eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0))"
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
AT_CHECK_UNQUOTED([tail -1 stdout], [0],
- [Datapath actions: $p2
+ [Datapath actions: 2
])
-flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x8100),vlan(vid=11,pcp=0),encap(eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0))"
+flow="in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x8100),vlan(vid=11,pcp=0),encap(eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0))"
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
AT_CHECK_UNQUOTED([tail -1 stdout], [0],
- [Datapath actions: $p2,$p3
+ [Datapath actions: 2,3
])
OVS_VSWITCHD_STOP
select_all=true output_port=@p3], [<0>
])
-AT_CHECK(
- [ovs-vsctl \
- -- get Interface p1 ofport \
- -- get Interface p2 ofport \
- -- get Interface p3 ofport],
- [0], [stdout])
-set `cat stdout`
-p1=$1 p2=$2 p3=$3
-
AT_DATA([flows.txt], [dnl
in_port=1 actions=mod_vlan_vid:17,output:2
in_port=2 actions=output:1
])
AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
-flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+flow="in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
AT_CHECK_UNQUOTED([tail -1 stdout], [0],
- [Datapath actions: push_vlan(vid=17,pcp=0),$p2,pop_vlan,$p3
+ [Datapath actions: push_vlan(vid=17,pcp=0),2,pop_vlan,3
])
-flow="in_port($p2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+flow="in_port(2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
AT_CHECK_UNQUOTED([tail -1 stdout], [0],
- [Datapath actions: $p1,$p3
+ [Datapath actions: 1,3
])
OVS_VSWITCHD_STOP
select_all=true output_vlan=12], [<0>
])
-AT_CHECK(
- [ovs-vsctl \
- -- get Interface p1 ofport \
- -- get Interface p2 ofport],
- [0], [stdout])
-set `cat stdout`
-br0=0 p1=$1 p2=$2
-
AT_DATA([flows.txt], [dnl
in_port=1 actions=output:2
in_port=2 actions=mod_vlan_vid:17,output:1
])
AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
-flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+flow="in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
actual=`tail -1 stdout | sed 's/Datapath actions: //'`
-expected="$p2,push_vlan(vid=12,pcp=0),$br0,$p1,$p2"
-AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected" br0=$br0 p1=$p1 p2=$p2], [0], [stdout])
+expected="2,push_vlan(vid=12,pcp=0),0,1,2"
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
mv stdout expout
-AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual" br0=$br0 p1=$p1 p2=$p2], [0], [expout])
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])
-flow="in_port($p2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+flow="in_port(2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
actual=`tail -1 stdout | sed 's/Datapath actions: //'`
-expected="push_vlan(vid=17,pcp=0),$p1,pop_vlan,push_vlan(vid=12,pcp=0),$br0,$p1,$p2"
-AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected" br0=$br0 p1=$p1 p2=$p2], [0], [stdout])
+expected="push_vlan(vid=17,pcp=0),1,pop_vlan,push_vlan(vid=12,pcp=0),0,1,2"
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
mv stdout expout
-AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual" br0=$br0 p1=$p1 p2=$p2], [0], [expout])
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])
OVS_VSWITCHD_STOP
AT_CLEANUP
add-port br0 p2 -- set Interface p2 type=dummy -- \
add-port br0 p3 -- set Interface p3 type=dummy])
-AT_CHECK(
- [ovs-vsctl \
- -- get Interface p1 ofport \
- -- get Interface p2 ofport \
- -- get Interface p3 ofport],
- [0], [stdout])
-set `cat stdout`
-br0=0 p1=$1 p2=$2 p3=$3
arp='eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)'
# Trace an ARP packet arriving on p3, to create a MAC learning entry.
OFPROTO_TRACE(
[br0],
- [in_port($p3),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),$arp],
+ [in_port(3),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),$arp],
[-generate],
- [$br0,$p1,$p2],
- [br0=$br0 p1=$p1 p2=$p2 p3=$p3])
+ [0,1,2])
# Check for the MAC learning entry.
AT_CHECK_UNQUOTED([ovs-appctl fdb/show br0 | sed 's/[[0-9]]$/?/'], [0], [dnl
port VLAN MAC Age
- $p3 0 50:54:00:00:00:05 ?
+ 3 0 50:54:00:00:00:05 ?
])
# Trace a packet arrival destined for the learned MAC.
# (This will also learn a MAC.)
OFPROTO_TRACE(
[br0],
- [in_port($p1),eth(src=50:54:00:00:00:06,dst=50:54:00:00:00:05),$arp],
+ [in_port(1),eth(src=50:54:00:00:00:06,dst=50:54:00:00:00:05),$arp],
[-generate],
- [$p3],
- [br0=$br0 p1=$p1 p2=$p2 p3=$p3])
+ [3])
# Check for both MAC learning entries.
AT_CHECK_UNQUOTED([ovs-appctl fdb/show br0 | sed 's/[[0-9]]$/?/'], [0], [dnl
port VLAN MAC Age
- $p3 0 50:54:00:00:00:05 ?
- $p1 0 50:54:00:00:00:06 ?
+ 3 0 50:54:00:00:00:05 ?
+ 1 0 50:54:00:00:00:06 ?
])
# Trace a packet arrival that updates the first learned MAC entry.
OFPROTO_TRACE(
[br0],
- [in_port($p2),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),$arp],
+ [in_port(2),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),$arp],
[-generate],
- [$br0,$p1,$p3],
- [br0=$br0 p1=$p1 p2=$p2 p3=$p3])
+ [0,1,3])
# Check that the MAC learning entry was updated.
AT_CHECK_UNQUOTED([ovs-appctl fdb/show br0 | sed 's/[[0-9]]$/?/'], [0], [dnl
port VLAN MAC Age
- $p1 0 50:54:00:00:00:06 ?
- $p2 0 50:54:00:00:00:05 ?
+ 1 0 50:54:00:00:00:06 ?
+ 2 0 50:54:00:00:00:05 ?
])
# Add another bridge.
-- set bridge br1 datapath-type=dummy \
-- add-port br1 p4 -- set interface p4 type=dummy \
-- add-port br1 p5 -- set interface p5 type=dummy])
-AT_CHECK(
- [ovs-vsctl \
- -- get Interface p4 ofport \
- -- get Interface p5 ofport],
- [0], [stdout])
-set `cat stdout`
-br1=0 p4=$1 p5=$2
# Trace some packet arrivals in br1 to create MAC learning entries there too.
OFPROTO_TRACE(
[br1],
- [in_port($p4),eth(src=50:54:00:00:00:06,dst=ff:ff:ff:ff:ff:ff),$arp],
+ [in_port(4),eth(src=50:54:00:00:00:06,dst=ff:ff:ff:ff:ff:ff),$arp],
[-generate],
- [$br1,$p5],
- [br1=$br1 p4=$p4 p5=$p5])
+ [0,5])
OFPROTO_TRACE(
[br1],
- [in_port($p5),eth(src=50:54:00:00:00:07,dst=ff:ff:ff:ff:ff:ff),$arp],
+ [in_port(5),eth(src=50:54:00:00:00:07,dst=ff:ff:ff:ff:ff:ff),$arp],
[-generate],
- [$br1,$p4],
- [br1=$br1 p4=$p4 p5=$p5])
+ [0,4])
# Check that the MAC learning entries were added.
AT_CHECK_UNQUOTED([ovs-appctl fdb/show br1 | sed 's/[[0-9]]$/?/'], [0], [dnl
port VLAN MAC Age
- $p4 0 50:54:00:00:00:06 ?
- $p5 0 50:54:00:00:00:07 ?
+ 4 0 50:54:00:00:00:06 ?
+ 5 0 50:54:00:00:00:07 ?
])
# Delete port p1 and see that its MAC learning entry disappeared, and
AT_CHECK([ovs-vsctl del-port p1])
AT_CHECK_UNQUOTED([ovs-appctl fdb/show br0 | sed 's/[[0-9]]$/?/'], [0], [dnl
port VLAN MAC Age
- $p2 0 50:54:00:00:00:05 ?
+ 2 0 50:54:00:00:00:05 ?
])
AT_CHECK_UNQUOTED([ovs-appctl fdb/show br1 | sed 's/[[0-9]]$/?/'], [0], [dnl
port VLAN MAC Age
- $p5 0 50:54:00:00:00:07 ?
+ 5 0 50:54:00:00:00:07 ?
])
OVS_VSWITCHD_STOP
git://git.onelab.eu / sliver-openvswitch.git / blobdiff