OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - handling messages with bad version])
+OVS_VSWITCHD_START
+
+# Start a monitor running OpenFlow 1.0, then send the switch an OF1.1 features
+# request
+AT_CHECK([ovs-ofctl -P openflow10 monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+ovs-appctl -t ovs-ofctl ofctl/send 0205000801234567
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//
+/ECHO/d' monitor.log], [0], [dnl
+send: OFPT_FEATURES_REQUEST (OF1.1):
+OFPT_ERROR (OF1.1): OFPBRC_BAD_VERSION
+OFPT_FEATURES_REQUEST (OF1.1):
+OFPT_BARRIER_REPLY:
+])
+
+OVS_VSWITCHD_STOP(["/received OpenFlow version 0x02 != expected 01/d"])
+AT_CLEANUP
+
AT_SETUP([ofproto - feature request, config request])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -vwarn show br0], [0], [stdout])
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
LOCAL(br0): addr:aa:55:aa:55:00:00
- config: 0
- state: 0
+ config: PORT_DOWN
+ state: LINK_DOWN
speed: 0 Mbps now, 0 Mbps max
OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
])
state: LINK_DOWN
speed: 0 Mbps now, 0 Mbps max
LOCAL(br0): addr:aa:55:aa:55:00:0x
- config: 0
- state: 0
+ config: PORT_DOWN
+ state: LINK_DOWN
speed: 0 Mbps now, 0 Mbps max
OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
])
AT_CHECK([STRIP_XIDS stdout], [0], [dnl
OFPST_PORT_DESC reply:
LOCAL(br0): addr:aa:55:aa:55:00:00
- config: 0
- state: 0
+ config: PORT_DOWN
+ state: LINK_DOWN
speed: 0 Mbps now, 0 Mbps max
])
OVS_VSWITCHD_STOP
AT_CHECK([STRIP_XIDS stdout], [0], [dnl
OFPST_PORT_DESC reply (OF1.2):
LOCAL(br0): addr:aa:55:aa:55:00:00
- config: 0
- state: 0
+ config: PORT_DOWN
+ state: LINK_DOWN
speed: 0 Mbps now, 0 Mbps max
])
OVS_VSWITCHD_STOP
OVS_VSWITCHD_STOP
AT_CLEANUP
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - queue configuration - (OpenFlow 1.0)])
+OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], [1], [2])
+AT_CHECK([ovs-ofctl queue-get-config br0 1], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPT_QUEUE_GET_CONFIG_REPLY: port=1
+])
+AT_CHECK([ovs-ofctl queue-get-config br0 10], [0],
+ [OFPT_ERROR (xid=0x2): OFPQOFC_BAD_PORT
+OFPT_QUEUE_GET_CONFIG_REQUEST (xid=0x2): port=10
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - queue configuration - (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], [1], [2])
+AT_CHECK([ovs-ofctl -O OpenFlow12 queue-get-config br0 1], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPT_QUEUE_GET_CONFIG_REPLY (OF1.2): port=1
+])
+AT_CHECK([ovs-ofctl -O OpenFlow12 queue-get-config br0 10], [0],
+ [OFPT_ERROR (OF1.2) (xid=0x2): OFPQOFC_BAD_PORT
+OFPT_QUEUE_GET_CONFIG_REQUEST (OF1.2) (xid=0x2): port=10
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - del group])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=output:10
+group_id=1235,type=all,bucket=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.1):
+ group_id=1235,type=all,bucket=actions=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.1):
+ group_id=1235,type=all,bucket=actions=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0], [0])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.1):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - del group deletes flows])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=output:10
+group_id=1235,type=all,bucket=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-groups br0 groups.txt])
+AT_DATA([flows.txt], [dnl
+tcp actions=group:1234
+udp actions=group:1235
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flows br0 flows.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-flows br0 | ofctl_strip | sort],
+[0], [dnl
+ tcp actions=group:1234
+ udp actions=group:1235
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-flows br0 | ofctl_strip | sort],
+[0], [dnl
+ udp actions=group:1235
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-flows br0 | ofctl_strip | sort],
+[0], [dnl
+ udp actions=group:1235
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-flows br0 | ofctl_strip | sort],
+[0], [dnl
+OFPST_FLOW reply (OF1.1):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - flow mod checks group availability])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 group_id=1234,type=all,bucket=output:10])
+AT_DATA([flows.txt], [dnl
+tcp actions=group:1234
+udp actions=group:1235
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=group:1234'])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=group:1235'], [1], [], [stderr])
+
+# The output should look like this:
+#
+# 00000000 02 0e 00 98 00 00 00 02-00 00 00 00 00 00 00 00 |................|
+# 00000010 00 00 00 00 00 00 00 00-ff 00 00 00 00 00 80 00 |................|
+# 00000020 ff ff ff ff ff ff ff ff-ff ff ff ff 00 00 00 00 |................|
+# 00000030 00 00 00 58 00 00 00 00-00 00 03 d7 00 00 00 00 |...X............|
+#
+# This 'sed' command captures the error message but drops details.
+AT_CHECK([sed '/truncated/d
+/^000000.0/d' stderr | STRIP_XIDS], [0],
+ [OFPT_ERROR (OF1.1): OFPBAC_BAD_OUT_GROUP
+OFPT_FLOW_MOD (OF1.1):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - group description])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 group_id=1234,type=all,bucket=output:10], [0], [stdout])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.1):
+ group_id=1234,type=all,bucket=actions=output:10
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - group description])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 group_id=1234,type=all,bucket=output:10])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.1):
+ group_id=1234,type=all,bucket=actions=output:10
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - group features])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn dump-group-features br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_FEATURES reply (OF1.2):
+ Group table:
+ Types: 0x0
+ Capabilities: 0x7
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - group stats])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=output:10
+group_id=1235,type=all,bucket=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=group:1234'])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-group-stats br0 group_id=1234], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout | sort], [0], [dnl
+ group_id=1234,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+OFPST_GROUP reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-group-stats br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout | sort], [0], [dnl
+ group_id=1234,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+ group_id=1235,ref_count=0,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+OFPST_GROUP reply (OF1.1):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - mod-port (OpenFlow 1.0)])
OVS_VSWITCHD_START
for command_config_state in \
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - basic flow_mod commands (OpenFlow 1.1)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([echo 'in_port=2,actions=1' | ovs-ofctl -O OpenFlow11 add-flows br0 -])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 in_port=1,actions=2])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 table=1,in_port=4,actions=3])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=1 actions=output:2
+ in_port=2 actions=output:1
+ table=1, in_port=4 actions=output:3
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-aggregate br0 table=0 | STRIP_XIDS], [0], [dnl
+OFPST_AGGREGATE reply (OF1.1): packet_count=0 byte_count=0 flow_count=2
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply (OF1.1):
+ table=1, in_port=4 actions=output:3
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - flow_mod negative test (OpenFlow 1.1)])
+OVS_VSWITCHD_START(
+ [set bridge br0 protocols=OpenFlow10,OpenFlow11,OpenFlow12,OpenFlow13])
+AT_CHECK([ovs-ofctl add-flow -O OpenFlow11 br0 table=1,action=goto_table:2])
+
+# The error message here actually comes from ovs-ofctl, not from ovs-vswitchd,
+# but at least it's the same code in ofpacts_check() that issues the error.
+AT_CHECK([ovs-ofctl add-flow -O OpenFlow11 br0 table=1,action=goto_table:1],
+ [1], [],
+ [ovs-ofctl: actions are invalid with specified match (OFPBRC_BAD_TABLE_ID)
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - set-field flow_mod commands (NXM)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 ipv6,table=1,in_port=3,actions=drop])
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - no mod flow with cookie change (OpenFlow 1.1)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 mod-flows br0 cookie=0x2,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+OFPST_FLOW reply (OF1.1):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
dnl The OpenFlow 1.2 spec states that the cookie may not be modified
-AT_SETUP([ofproto - no mod flow with cookie change (OpenFlow1.2)])
+AT_SETUP([ofproto - no mod flow with cookie change (OpenFlow 1.2)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - mod flows based on cookie mask (OpenFlow 1.1)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x1,in_port=2,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x2,in_port=3,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x1, in_port=2 actions=output:1
+ cookie=0x2, in_port=3 actions=output:1
+OFPST_FLOW reply (OF1.1):
+])
+
+AT_CHECK([ovs-ofctl -O OpenFlow11 mod-flows br0 cookie=0x1/0xff,actions=4])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:4
+ cookie=0x1, in_port=2 actions=output:4
+ cookie=0x2, in_port=3 actions=output:1
+OFPST_FLOW reply (OF1.1):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - mod flows based on cookie mask (OpenFlow 1.2)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x1,in_port=1,actions=1])
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - mod flow with cookie miss (mask==0)])
+AT_SETUP([ofproto - mod flow with cookie miss (mask==0) - NXM])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -F nxm mod-flows br0 in_port=1,actions=1])
AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - mod flow with cookie miss (mask!=0)])
+AT_SETUP([ofproto - mod flow with cookie miss (mask==0) - OF1.1])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O openflow11 mod-flows br0 in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O openflow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=1 actions=output:1
+OFPST_FLOW reply (OF1.1):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flow with cookie miss (mask==0) - OF1.2])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O openflow12 mod-flows br0 in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O openflow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+OFPST_FLOW reply (OF1.2):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flow with cookie miss (mask!=0) - NXM])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -F nxm mod-flows br0 cookie=1/1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - mod flow with cookie miss (mask!=0) - OF1.1])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O openflow11 mod-flows br0 cookie=1/1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O openflow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+OFPST_FLOW reply (OF1.1):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flow with cookie miss (mask!=0) - OF1.2])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O openflow12 mod-flows br0 cookie=1/1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O openflow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+OFPST_FLOW reply (OF1.2):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - del flows with cookies])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - del flows based on table id (OpenFlow 1.1)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x2,in_port=2,table=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x2, table=1, in_port=2 actions=output:1
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 table=0])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x2, table=1, in_port=2 actions=output:1
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 table=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x2,in_port=2,table=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x2, table=1, in_port=2 actions=output:1
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [dnl
+OFPST_FLOW reply (OF1.1):
+ cookie=0x2, table=1, in_port=2 actions=output:1
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - del flows based on table id (OpenFlow 1.2)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x1,in_port=1,actions=1])
-- --id=@t0 create Flow_Table name=main \
-- --id=@t1 create Flow_Table flow-limit=1024 \
-- set bridge br0 'flow_tables={1=@t1,0=@t0}' \
- | perl $srcdir/uuidfilt.pl],
+ | ${PERL} $srcdir/uuidfilt.pl],
[0], [<0>
<1>
])
AT_SETUP([ofproto - flow table configuration (OpenFlow 1.2)])
OVS_VSWITCHD_START
# Check the default configuration.
-(mid="wild=0xffffffffff, max=1000000,"
+(mid="wild=0xfffffffff, max=1000000,"
tail="
lookup=0, matched=0
- match=0xffffffffff, instructions=0x00000007, config=0x00000003
+ match=0xfffffffff, instructions=0x00000007, config=0x00000003
write_actions=0x00000000, apply_actions=0x00000000
- write_setfields=0x000000ffffffffff
- apply_setfields=0x000000ffffffffff
+ write_setfields=0x0000000fffffffff
+ apply_setfields=0x0000000fffffffff
metadata_match=0xffffffffffffffff
metadata_write=0xffffffffffffffff"
echo "OFPST_TABLE reply (OF1.2) (xid=0x2): 254 tables
-- --id=@t0 create Flow_Table name=main \
-- --id=@t1 create Flow_Table flow-limit=1024 \
-- set bridge br0 'flow_tables={1=@t1,0=@t0}' \
- | perl $srcdir/uuidfilt.pl],
+ | ${PERL} $srcdir/uuidfilt.pl],
[0], [<0>
<1>
])
# Check that the configuration was updated.
mv expout orig-expout
(echo "OFPST_TABLE reply (OF1.2) (xid=0x2): 254 tables
- 0: main : wild=0xffffffffff, max=1000000, active=0"
+ 0: main : wild=0xfffffffff, max=1000000, active=0"
tail -n +3 orig-expout | head -7
- echo " 1: table1 : wild=0xffffffffff, max= 1024, active=0"
+ echo " 1: table1 : wild=0xfffffffff, max= 1024, active=0"
tail -n +11 orig-expout) > expout
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-tables br0], [0], [expout])
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - hard limits on flow table size (OpenFLow 1.0)])
+AT_SETUP([ofproto - hard limits on flow table size (OpenFlow 1.0)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
AT_CHECK(
[ovs-vsctl \
-- --id=@t0 create Flow_Table flow-limit=4 \
-- set bridge br0 flow_tables:0=@t0 \
- | perl $srcdir/uuidfilt.pl],
+ | ${PERL} $srcdir/uuidfilt.pl],
[0], [<0>
])
# Add 4 flows.
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - hard limits on flow table size (OpenFLow 1.2)])
+AT_SETUP([ofproto - hard limits on flow table size (OpenFlow 1.2)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
AT_CHECK(
[ovs-vsctl \
-- --id=@t0 create Flow_Table flow-limit=4 \
-- set bridge br0 flow_tables:0=@t0 \
- | perl $srcdir/uuidfilt.pl],
+ | ${PERL} $srcdir/uuidfilt.pl],
[0], [<0>
])
# Add 4 flows.
[ovs-vsctl \
-- --id=@t0 create Flow_Table flow-limit=4 overflow-policy=evict \
-- set bridge br0 flow_tables:0=@t0 \
- | perl $srcdir/uuidfilt.pl],
+ | ${PERL} $srcdir/uuidfilt.pl],
[0], [<0>
])
# Add 4 flows.
[ovs-vsctl \
-- --id=@t0 create Flow_Table flow-limit=4 overflow-policy=evict \
-- set bridge br0 flow_tables:0=@t0 \
- | perl $srcdir/uuidfilt.pl],
+ | ${PERL} $srcdir/uuidfilt.pl],
[0], [<0>
])
# Add 4 flows.
overflow-policy=evict \
groups='"NXM_OF_IN_PORT[[]]"' \
-- set bridge br0 flow_tables:0=@t0 \
- | perl $srcdir/uuidfilt.pl],
+ | ${PERL} $srcdir/uuidfilt.pl],
[0], [<0>
])
# Add 4 flows.
overflow-policy=evict \
groups='"NXM_OF_IN_PORT[[]]"' \
-- set bridge br0 flow_tables:0=@t0 \
- | perl $srcdir/uuidfilt.pl],
+ | ${PERL} $srcdir/uuidfilt.pl],
[0], [<0>
])
# Add 4 flows.
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - eviction upon table overflow, with modified hard timeout])
+OVS_VSWITCHD_START
+# Configure a maximum of 4 flows.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table flow-limit=4 overflow-policy=evict \
+ -- set bridge br0 flow_tables:0=@t0 \
+ | ${PERL} $srcdir/uuidfilt.pl],
+ [0], [<0>
+])
+ovs-appctl time/stop
+# Add 4 flows.
+for in_port in 4 3 2 1; do
+ ovs-ofctl add-flow br0 hard_timeout=$((10 + in_port * 3)),in_port=$in_port,actions=drop
+done
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ hard_timeout=13, in_port=1 actions=drop
+ hard_timeout=16, in_port=2 actions=drop
+ hard_timeout=19, in_port=3 actions=drop
+ hard_timeout=22, in_port=4 actions=drop
+NXST_FLOW reply:
+])
+# Sleep and modify the one that expires soonest
+ovs-appctl time/warp 5000
+AT_CHECK([ovs-ofctl mod-flows br0 in_port=1,actions=drop])
+# At this point the table would looks like:
+# in_port seconds to expire
+# 1 13
+# 2 11
+# 3 14
+# 4 17
+ovs-appctl time/warp 2000
+# Adding another flow will cause the one that expires soonest to be evicted.
+AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ hard_timeout=13, in_port=1 actions=drop
+ hard_timeout=19, in_port=3 actions=drop
+ hard_timeout=22, in_port=4 actions=drop
+ in_port=5 actions=drop
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - eviction upon table overflow, with modified idle timeout])
+OVS_VSWITCHD_START([add-port br0 p1 -- set interface p1 type=dummy ofport_request=1])
+# Configure a maximum of 4 flows.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table flow-limit=4 overflow-policy=evict \
+ -- set bridge br0 flow_tables:0=@t0 \
+ | ${PERL} $srcdir/uuidfilt.pl],
+ [0], [<0>
+])
+# Add 4 flows.
+for in_port in 4 3 2 1; do
+ ovs-ofctl add-flow br0 idle_timeout=$((10 + in_port * 3)),in_port=$in_port,actions=drop
+done
+ovs-appctl time/stop
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=13, in_port=1 actions=drop
+ idle_timeout=16, in_port=2 actions=drop
+ idle_timeout=19, in_port=3 actions=drop
+ idle_timeout=22, in_port=4 actions=drop
+NXST_FLOW reply:
+])
+# Sleep and receive on the flow that expires soonest
+ovs-appctl time/warp 5000
+AT_CHECK([ovs-appctl netdev-dummy/receive p1 'in_port(1)'])
+# At this point the table would looks like:
+# in_port seconds to expire
+# 1 13
+# 2 11
+# 3 14
+# 4 17
+ovs-appctl time/warp 2000
+# Adding another flow will cause the one that expires soonest to be evicted.
+AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=19, in_port=3 actions=drop
+ idle_timeout=22, in_port=4 actions=drop
+ in_port=5 actions=drop
+ n_packets=1, n_bytes=60, idle_timeout=13, in_port=1 actions=drop
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - asynchronous message control (OpenFlow 1.0)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -P openflow10 monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
: > expout
+: > experr
# find out current role
ovs-appctl -t ovs-ofctl ofctl/send 031800180000000200000000000000000000000000000000
-echo >>expout "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x2): role=nochange"
+echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x2): role=nochange"
echo >>expout "OFPT_ROLE_REPLY (OF1.2) (xid=0x2): role=equal"
# Become slave (generation_id is initially undefined, so 2^63+2 should not be stale)
ovs-appctl -t ovs-ofctl ofctl/send 031800180000000300000003000000008000000000000002
-echo >>expout "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x3): role=slave generation_id=9223372036854775810"
+echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x3): role=slave generation_id=9223372036854775810"
echo >>expout "OFPT_ROLE_REPLY (OF1.2) (xid=0x3): role=slave generation_id=9223372036854775810"
# Try to become the master using a stale generation ID
ovs-appctl -t ovs-ofctl ofctl/send 031800180000000400000002000000000000000000000002
-echo >>expout "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x4): role=master generation_id=2"
+echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x4): role=master generation_id=2"
echo >>expout "OFPT_ERROR (OF1.2) (xid=0x4): OFPRRFC_STALE"
echo >>expout "OFPT_ROLE_REQUEST (OF1.2) (xid=0x4): role=master generation_id=2"
# Become master using a valid generation ID
ovs-appctl -t ovs-ofctl ofctl/send 031800180000000500000002000000000000000000000001
-echo >>expout "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x5): role=master generation_id=1"
+echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x5): role=master generation_id=1"
echo >>expout "OFPT_ROLE_REPLY (OF1.2) (xid=0x5): role=master generation_id=1"
ovs-appctl -t ovs-ofctl ofctl/barrier
echo >>expout "OFPT_BARRIER_REPLY (OF1.2) (xid=0x3):"
-AT_CHECK([cat monitor.log], [0], [expout])
+AT_CHECK([grep -v '^send:' monitor.log], [0], [expout])
+mv experr expout
+AT_CHECK([grep '^send:' monitor.log], [0], [expout])
ovs-appctl -t ovs-ofctl exit
OVS_VSWITCHD_STOP
dnl by the controller.
AT_SETUP([ofproto - packet-out from controller (OpenFlow 1.0)])
OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], [1])
# Start a monitor listening for packet-ins.
AT_CHECK([ovs-ofctl -P openflow10 monitor br0 --detach --no-chdir --pidfile])
AT_CAPTURE_FILE([monitor.log])
# Send some packet-outs with OFPP_NONE and OFPP_CONTROLLER (65533) as in_port.
-AT_CHECK([ovs-ofctl packet-out br0 none controller '0001020304050010203040501234'])
-AT_CHECK([ovs-ofctl packet-out br0 controller controller '0001020304050010203040505678'])
+AT_CHECK([ovs-ofctl packet-out br0 none controller,1 '0001020304050010203040501234'])
+AT_CHECK([ovs-ofctl packet-out br0 controller controller,1 '0001020304050010203040505678'])
# Stop the monitor and check its output.
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl exit
+ovs-ofctl dump-ports br0
+
AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
OFPT_PACKET_IN: total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OVS_VSWITCHD_STOP
AT_CLEANUP
+dnl This test checks that OFPT_PACKET_OUT accepts both OFPP_NONE (as
+dnl specified by OpenFlow 1.1) and OFPP_CONTROLLER (used by some
+dnl controllers despite the spec) as meaning a packet that was generated
+dnl by the controller.
+AT_SETUP([ofproto - packet-out from controller (OpenFlow 1.1)])
+OVS_VSWITCHD_START
+
+# Start a monitor listening for packet-ins.
+AT_CHECK([ovs-ofctl -O OpenFlow11 monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/send 0209000c0123456700000080
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+
+# Send some packet-outs with OFPP_NONE and OFPP_CONTROLLER (65533) as in_port.
+AT_CHECK([ovs-ofctl -O OpenFlow11 packet-out br0 none controller '0001020304050010203040501234'])
+AT_CHECK([ovs-ofctl -O OpenFlow11 packet-out br0 4294967293 controller '0001020304050010203040505678'])
+
+# Stop the monitor and check its output.
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
+OFPT_PACKET_IN (OF1.1): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+OFPT_PACKET_IN (OF1.1): total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
+OFPT_BARRIER_REPLY (OF1.1):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
dnl This test checks that metadata is encoded in packet_in structures,
dnl supported by NXAST.
AT_SETUP([ofproto - packet-out with metadata (NXM)])
AT_CAPTURE_FILE([monitor.log])
# Send a packet-out with a load action to set some metadata, and forward to controller
-AT_CHECK([ovs-ofctl packet-out br0 controller 'load(0xfafafafa5a5a5a5a->OXM_OF_METADATA[[0..63]]), controller' '0001020304050010203040501234'])
+AT_CHECK([ovs-ofctl packet-out br0 controller 'load(0xfafafafa5a5a5a5a->OXM_OF_METADATA[[0..63]]), load(0xaa->NXM_NX_PKT_MARK[[]]), controller' '0001020304050010203040501234'])
# Stop the monitor and check its output.
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl exit
AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
-NXT_PACKET_IN: total_len=14 in_port=CONTROLLER metadata=0xfafafafa5a5a5a5a (via action) data_len=14 (unbuffered)
+NXT_PACKET_IN: total_len=14 in_port=CONTROLLER metadata=0xfafafafa5a5a5a5a pkt_mark=0xaa (via action) data_len=14 (unbuffered)
metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_BARRIER_REPLY:
])
OVS_VSWITCHD_STOP
AT_CLEANUP
+dnl This test checks that tunnel metadata is encoded in packet_in structures.
+AT_SETUP([ofproto - packet-out with tunnel metadata (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+
+# Start a monitor listening for packet-ins.
+AT_CHECK([ovs-ofctl -O OpenFlow12 monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/send 0309000c0123456700000080
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+
+# Send a packet-out with set field actions to set some tunnel metadata, and forward to controller
+AT_CHECK([ovs-ofctl -O OpenFlow12 packet-out br0 none 'set_field:127.0.0.1->tun_src,set_field:0x01020304->tun_id,set_field:192.168.0.1->tun_dst, controller' '0001020304050010203040501234'])
+
+# Stop the monitor and check its output.
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
+OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY tun_id=0x1020304 tun_src=127.0.0.1 tun_dst=192.168.0.1 (via action) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+OFPT_BARRIER_REPLY (OF1.2):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - flow monitoring])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START
}
print $_ foreach sort(@buffer);
'
-AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log | perl -e "$sort"], [0],
+AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log | ${PERL} -e "$sort"], [0],
[NXST_FLOW_MONITOR reply (xid=0x0):
event=ADDED table=0 cookie=0 in_port=0,dl_vlan=124 actions=output:2
NXST_FLOW_MONITOR reply (xid=0x0):
# Linux
rmem_max=`cat /proc/sys/net/core/rmem_max`
elif rmem_max=`sysctl -n net.inet.tcp.recvbuf_max 2>/dev/null`; then
- : # FreeBSD
+ : # FreeBSD, NetBSD
else
# Don't know how to get maximum socket receive buffer on this OS
AT_SKIP_IF([:])
queue_size=`expr $rmem_max + 128 \* 1024`
echo rmem_max=$rmem_max queue_size=$queue_size
+# If there's too much queuing skip the test to avoid timing out.
+AT_SKIP_IF([test $rmem_max -gt 1048576])
+
# Each flow update message takes up at least 48 bytes of space in queues
# and in practice more than that.
n_msgs=`expr $queue_size / 48`
# Add $n_msgs flows.
(echo "in_port=2,actions=output:2"
-perl -e '
+${PERL} -e '
for ($i = 0; $i < '$n_msgs'; $i++) {
print "cookie=1,reg1=$i,actions=drop\n";
}
AT_CHECK([ovs-ofctl del-flows br0 cookie=1/-1])
ovs-appctl -t ovs-ofctl ofctl/unblock
-ovs-appctl -t ovs-ofctl ofctl/barrier
+
+# Wait for the connection resumed.
+# A barrier doesn't work for this purpose.
+# https://www.mail-archive.com/dev@openvswitch.org/msg27013.html
+# https://www.mail-archive.com/dev@openvswitch.org/msg27675.html
+OVS_WAIT_UNTIL([grep NXT_FLOW_MONITOR_RESUMED monitor.log])
ovs-appctl -t ovs-ofctl exit
OVS_VSWITCHD_STOP
AT_CLEANUP
+
+AT_SETUP([ofproto - event filtering (OpenFlow 1.3)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow13 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Send an OpenFlow13 message (04), OFPT_GET_ASYNC_REQUEST (1a), length (8), xid (0a)
+ovs-appctl -t ovs-ofctl ofctl/send 041a00080000000a
+ovs-appctl -t ovs-ofctl ofctl/barrier
+
+# Check default setting
+read -r -d '' expected <<'EOF'
+EOF
+
+AT_CHECK([ofctl_strip < monitor.log], [], [dnl
+send: OFPT_GET_ASYNC_REQUEST (OF1.3):
+OFPT_GET_ASYNC_REPLY (OF1.3):
+ master:
+ PACKET_IN: no_match action
+ PORT_STATUS: add delete modify
+ FLOW_REMOVED: idle hard delete
+
+ slave:
+ PACKET_IN: (off)
+ PORT_STATUS: add delete modify
+ FLOW_REMOVED: (off)
+OFPT_BARRIER_REPLY (OF1.3):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - ofport_request])
+OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], [1], [2], [3])
+
+set_and_check_specific_ofports () {
+ ovs-vsctl set Interface p1 ofport_request="$1" -- \
+ set Interface p2 ofport_request="$2" -- \
+ set Interface p3 ofport_request="$3"
+ ofports=`ovs-vsctl get Interface p1 ofport -- \
+ get Interface p2 ofport -- \
+ get Interface p3 ofport`
+ AT_CHECK_UNQUOTED([echo $ofports], [0], [$1 $2 $3
+])
+}
+for pre in '1 2 3' '1 3 2' '2 1 3' '2 3 1' '3 1 2' '3 2 1'; do
+ for post in '1 2 3' '1 3 2' '2 1 3' '2 3 1' '3 1 2' '3 2 1'; do
+ echo -----------------------------------------------------------
+ echo "Check changing port numbers from $pre to $post"
+ set_and_check_ofports $pre
+ set_and_check_ofports $post
+ done
+done
+
+ovs-vsctl del-port p3
+
+set_and_check_poorly_specified_ofports () {
+ ovs-vsctl set Interface p1 ofport_request="$1" -- \
+ set Interface p2 ofport_request="$2"
+ p1=`ovs-vsctl get Interface p1 ofport`
+ p2=`ovs-vsctl get Interface p2 ofport`
+ echo $p1 $p2
+
+ AT_CHECK([test "$p1" != "$p2"])
+ if test "$1" = "$2" && test "$1" != '[[]]'; then
+ # One port number must be the requested one.
+ AT_CHECK([test "$p1" = "$1" || test "$p2" = "$1"])
+ # The other port number must be different (already tested above).
+ else
+ AT_CHECK([test "$1" = '[[]]' || test "$p1" == "$1"])
+ AT_CHECK([test "$2" = '[[]]' || test "$p2" == "$2"])
+ fi
+}
+for pre in '1 2' '[[]] 2' '1 [[]]' '[[]] [[]]' '2 1' '[[]] 1' '2 [[]]' \
+ '1 1' '2 2'; do
+ for post in '1 2' '[[]] 2' '1 [[]]' '[[]] [[]]' '2 1' '[[]] 1' '2 [[]]' \
+ '1 1' '2 2'; do
+ echo -----------------------------------------------------------
+ echo "Check changing port numbers from $pre to $post"
+ set_and_check_poorly_specified_ofports $pre
+ set_and_check_poorly_specified_ofports $post
+ done
+done
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+
+AT_SETUP([ofproto - bundles, open (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Send an OpenFlow14 message (05), OFPT_BUNDLE_CONTROL (21), length (10), xid (0a)
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REPLY flags=0
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - bundles, double open (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Send twice an OpenFlow14 message (05), OFPT_BUNDLE_CONTROL (21), length (10), xid (0a)
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REPLY flags=0
+OFPT_BARRIER_REPLY (OF1.4):
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - bundle close without open (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
+OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - bundle double close (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Open, Close, Close
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REPLY flags=0
+OFPT_BARRIER_REPLY (OF1.4):
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REPLY flags=0
+OFPT_BARRIER_REPLY (OF1.4):
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
+OFPT_ERROR (OF1.4): OFPBFC_BUNDLE_CLOSED
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - bundle close, different flags (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Open, Close, Close
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 02"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REPLY flags=0
+OFPT_BARRIER_REPLY (OF1.4):
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
+OFPT_ERROR (OF1.4): OFPBFC_BAD_FLAGS
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - bundle commit without open (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Open, Close, Close
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 04 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=COMMIT_REQUEST flags=atomic
+OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=COMMIT_REQUEST flags=atomic
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - bundle commit, different flags (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Open, Close, Close
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 04 00 02"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=OPEN_REPLY flags=0
+OFPT_BARRIER_REPLY (OF1.4):
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=COMMIT_REQUEST flags=ordered
+OFPT_ERROR (OF1.4): OFPBFC_BAD_FLAGS
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=COMMIT_REQUEST flags=ordered
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - bundle discard without open (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Open, Close, Close
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 06 00 01"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
+send: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=DISCARD_REQUEST flags=atomic
+OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
+OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0x1 type=DISCARD_REQUEST flags=atomic
+OFPT_BARRIER_REPLY (OF1.4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
git://git.onelab.eu / sliver-openvswitch.git / blobdiff