AT_SETUP([ofproto - echo request])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl -vANY:ANY:WARN probe br0])
+AT_CHECK([ovs-ofctl -vwarn probe br0])
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - handling messages with bad version])
+OVS_VSWITCHD_START
+
+# Start a monitor running OpenFlow 1.0, then send the switch an OF1.1 features
+# request
+AT_CHECK([ovs-ofctl -P openflow10 monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+ovs-appctl -t ovs-ofctl ofctl/send 0205000801234567
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//
+/ECHO/d' monitor.log], [0], [dnl
+send: OFPT_FEATURES_REQUEST (OF1.1):
+OFPT_ERROR (OF1.1): OFPBRC_BAD_VERSION
+OFPT_FEATURES_REQUEST (OF1.1):
+OFPT_BARRIER_REPLY:
+])
+
+OVS_VSWITCHD_STOP(["/received OpenFlow version 0x02 != expected 01/d"])
+AT_CLEANUP
+
AT_SETUP([ofproto - feature request, config request])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl -vANY:ANY:WARN show br0], [0], [stdout])
+AT_CHECK([ovs-ofctl -vwarn show br0], [0], [stdout])
AT_CHECK([STRIP_XIDS stdout], [0], [dnl
OFPT_FEATURES_REPLY: dpid:fedcba9876543210
-n_tables:255, n_buffers:256
+n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
LOCAL(br0): addr:aa:55:aa:55:00:00
config: PORT_DOWN
state: LINK_DOWN
- speed: 100 Mbps now, 100 Mbps max
+ speed: 0 Mbps now, 0 Mbps max
+OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - set OpenFlow port number])
+OVS_VSWITCHD_START(
+ [add-port br0 p1 -- set Interface p1 type=dummy --\
+ add-port br0 p2 -- set Interface p2 type=dummy ofport_request=99])
+AT_CHECK([ovs-ofctl -vwarn show br0], [0], [stdout])
+AT_CHECK([[sed '
+s/ (xid=0x[0-9a-fA-F]*)//
+s/00:0.$/00:0x/' < stdout]],
+ [0], [dnl
+OFPT_FEATURES_REPLY: dpid:fedcba9876543210
+n_tables:254, n_buffers:256
+capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
+actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
+ 1(p1): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+ 99(p2): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+ LOCAL(br0): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
])
+
OVS_VSWITCHD_STOP
AT_CLEANUP
dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
-AT_SETUP([ofproto - port stats])
+AT_SETUP([ofproto - port stats - (OpenFlow 1.0)])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl -vANY:ANY:WARN dump-ports br0], [0], [stdout])
+AT_CHECK([ovs-ofctl -vwarn dump-ports br0], [0], [stdout])
AT_CHECK([STRIP_XIDS stdout], [0], [dnl
OFPST_PORT reply: 1 ports
- port 65534: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
+ port LOCAL: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
+ tx pkts=0, bytes=0, drop=0, errs=0, coll=0
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - port stats - (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn dump-ports br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_PORT reply (OF1.2): 1 ports
+ port LOCAL: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
tx pkts=0, bytes=0, drop=0, errs=0, coll=0
])
OVS_VSWITCHD_STOP
dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
-AT_SETUP([ofproto - queue stats])
+AT_SETUP([ofproto - port-desc stats (OpenFlow 1.0)])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl -vANY:ANY:WARN queue-stats br0], [0], [stdout])
+AT_CHECK([ovs-ofctl -vwarn dump-ports-desc br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_PORT_DESC reply:
+ LOCAL(br0): addr:aa:55:aa:55:00:00
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - port-desc stats (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn dump-ports-desc br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_PORT_DESC reply (OF1.2):
+ LOCAL(br0): addr:aa:55:aa:55:00:00
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - queue stats - (OpenFlow 1.0)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -vwarn queue-stats br0], [0], [stdout])
AT_CHECK([STRIP_XIDS stdout], [0], [dnl
OFPST_QUEUE reply: 0 queues
])
+AT_CHECK([ovs-ofctl -vwarn queue-stats br0 ANY 5], [0],
+ [OFPT_ERROR (xid=0x2): OFPQOFC_BAD_QUEUE
+OFPST_QUEUE request (xid=0x2):port=ANY queue=5
+])
+AT_CHECK([ovs-ofctl -vwarn queue-stats br0 10], [0],
+ [OFPT_ERROR (xid=0x2): OFPQOFC_BAD_PORT
+OFPST_QUEUE request (xid=0x2):port=10 queue=ALL
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - queue stats - (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn queue-stats br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_QUEUE reply (OF1.2): 0 queues
+])
+AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn queue-stats br0 ALL 5], [0],
+ [OFPT_ERROR (OF1.2) (xid=0x2): OFPQOFC_BAD_QUEUE
+OFPST_QUEUE request (OF1.2) (xid=0x2):port=ANY queue=5
+])
+AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn queue-stats br0 10], [0],
+ [OFPT_ERROR (OF1.2) (xid=0x2): OFPQOFC_BAD_PORT
+OFPST_QUEUE request (OF1.2) (xid=0x2):port=10 queue=ALL
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - queue configuration - (OpenFlow 1.0)])
+OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], [1], [2])
+AT_CHECK([ovs-ofctl queue-get-config br0 1], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPT_QUEUE_GET_CONFIG_REPLY: port=1
+])
+AT_CHECK([ovs-ofctl queue-get-config br0 10], [0],
+ [OFPT_ERROR (xid=0x2): OFPQOFC_BAD_PORT
+OFPT_QUEUE_GET_CONFIG_REQUEST (xid=0x2): port=10
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - queue configuration - (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], [1], [2])
+AT_CHECK([ovs-ofctl -O OpenFlow12 queue-get-config br0 1], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPT_QUEUE_GET_CONFIG_REPLY (OF1.2): port=1
+])
+AT_CHECK([ovs-ofctl -O OpenFlow12 queue-get-config br0 10], [0],
+ [OFPT_ERROR (OF1.2) (xid=0x2): OFPQOFC_BAD_PORT
+OFPT_QUEUE_GET_CONFIG_REQUEST (OF1.2) (xid=0x2): port=10
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - del group])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=output:10
+group_id=1235,type=all,bucket=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.1):
+ group_id=1235,type=all,bucket=actions=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.1):
+ group_id=1235,type=all,bucket=actions=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0], [0])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.1):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - del group deletes flows])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=output:10
+group_id=1235,type=all,bucket=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-groups br0 groups.txt])
+AT_DATA([flows.txt], [dnl
+tcp actions=group:1234
+udp actions=group:1235
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flows br0 flows.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-flows br0 | ofctl_strip | sort],
+[0], [dnl
+ tcp actions=group:1234
+ udp actions=group:1235
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-flows br0 | ofctl_strip | sort],
+[0], [dnl
+ udp actions=group:1235
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-flows br0 | ofctl_strip | sort],
+[0], [dnl
+ udp actions=group:1235
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-flows br0 | ofctl_strip | sort],
+[0], [dnl
+OFPST_FLOW reply (OF1.1):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - flow mod checks group availability])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 group_id=1234,type=all,bucket=output:10])
+AT_DATA([flows.txt], [dnl
+tcp actions=group:1234
+udp actions=group:1235
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=group:1234'])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=group:1235'], [1], [], [stderr])
+
+# The output should look like this:
+#
+# 00000000 02 0e 00 98 00 00 00 02-00 00 00 00 00 00 00 00 |................|
+# 00000010 00 00 00 00 00 00 00 00-ff 00 00 00 00 00 80 00 |................|
+# 00000020 ff ff ff ff ff ff ff ff-ff ff ff ff 00 00 00 00 |................|
+# 00000030 00 00 00 58 00 00 00 00-00 00 03 d7 00 00 00 00 |...X............|
+#
+# This 'sed' command captures the error message but drops details.
+AT_CHECK([sed '/truncated/d
+/^000000.0/d' stderr | STRIP_XIDS], [0],
+ [OFPT_ERROR (OF1.1): OFPBAC_BAD_OUT_GROUP
+OFPT_FLOW_MOD (OF1.1):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - group description])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 group_id=1234,type=all,bucket=output:10], [0], [stdout])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.1):
+ group_id=1234,type=all,bucket=actions=output:10
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - group description])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 group_id=1234,type=all,bucket=output:10])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.1):
+ group_id=1234,type=all,bucket=actions=output:10
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - group features])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn dump-group-features br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_GROUP_FEATURES reply (OF1.2):
+ Group table:
+ Types: 0x0
+ Capabilities: 0x7
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - group stats])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=output:10
+group_id=1235,type=all,bucket=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=group:1234'])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-group-stats br0 group_id=1234], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout | sort], [0], [dnl
+ group_id=1234,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+OFPST_GROUP reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-group-stats br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout | sort], [0], [dnl
+ group_id=1234,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+ group_id=1235,ref_count=0,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+OFPST_GROUP reply (OF1.1):
+])
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - mod-port])
+AT_SETUP([ofproto - mod-port (OpenFlow 1.0)])
OVS_VSWITCHD_START
for command_config_state in \
'up 0 0' \
'noflood NO_FLOOD 0' \
'down PORT_DOWN,NO_FLOOD LINK_DOWN' \
- 'flood PORT_DOWN LINK_DOWN'
+ 'flood PORT_DOWN LINK_DOWN' \
+ 'no-receive PORT_DOWN,NO_RECV LINK_DOWN' \
+ 'no-forward PORT_DOWN,NO_RECV,NO_FWD LINK_DOWN' \
+ 'no-packet-in PORT_DOWN,NO_RECV,NO_FWD,NO_PACKET_IN LINK_DOWN' \
+ 'forward PORT_DOWN,NO_RECV,NO_PACKET_IN LINK_DOWN' \
+ 'packet-in PORT_DOWN,NO_RECV LINK_DOWN' \
+ 'up NO_RECV 0' \
+ 'receive 0 0'
do
set $command_config_state
command=$[1] config=`echo $[2] | sed 's/,/ /g'` state=$[3]
- AT_CHECK([ovs-ofctl -vANY:ANY:WARN mod-port br0 br0 $command])
- AT_CHECK([ovs-ofctl -vANY:ANY:WARN show br0], [0], [stdout])
+ AT_CHECK([ovs-ofctl -vwarn mod-port br0 br0 $command])
+ AT_CHECK([ovs-ofctl -vwarn show br0], [0], [stdout])
AT_CHECK_UNQUOTED([STRIP_XIDS stdout], [0], [dnl
OFPT_FEATURES_REPLY: dpid:fedcba9876543210
-n_tables:255, n_buffers:256
+n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
LOCAL(br0): addr:aa:55:aa:55:00:00
config: $config
state: $state
- speed: 100 Mbps now, 100 Mbps max
+ speed: 0 Mbps now, 0 Mbps max
OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
])
done
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - mod-port (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+for command_config_state in \
+ 'up 0 0' \
+ 'down PORT_DOWN LINK_DOWN' \
+ 'no-receive PORT_DOWN,NO_RECV LINK_DOWN' \
+ 'no-forward PORT_DOWN,NO_RECV,NO_FWD LINK_DOWN' \
+ 'no-packet-in PORT_DOWN,NO_RECV,NO_FWD,NO_PACKET_IN LINK_DOWN' \
+ 'forward PORT_DOWN,NO_RECV,NO_PACKET_IN LINK_DOWN' \
+ 'packet-in PORT_DOWN,NO_RECV LINK_DOWN' \
+ 'up NO_RECV 0' \
+ 'receive 0 0'
+do
+ set $command_config_state
+ command=$[1] config=`echo $[2] | sed 's/,/ /g'` state=$[3]
+ AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn mod-port br0 br0 $command])
+ AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn show br0], [0], [stdout])
+ AT_CHECK_UNQUOTED([STRIP_XIDS stdout], [0], [dnl
+OFPT_FEATURES_REPLY (OF1.2): dpid:fedcba9876543210
+n_tables:254, n_buffers:256
+capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS
+ LOCAL(br0): addr:aa:55:aa:55:00:00
+ config: $config
+ state: $state
+ speed: 0 Mbps now, 0 Mbps max
+OFPT_GET_CONFIG_REPLY (OF1.2): frags=normal miss_send_len=0
+])
+done
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - basic flow_mod commands (NXM)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip], [0], [NXST_FLOW reply:
])
-AT_CHECK([echo 'in_port=1,actions=0' | ovs-ofctl add-flows br0 -])
-AT_CHECK([ovs-ofctl add-flow br0 in_port=0,actions=1])
-AT_CHECK([ovs-ofctl -F nxm add-flow br0 table=1,in_port=3,actions=2])
+AT_CHECK([echo 'in_port=2,actions=1' | ovs-ofctl add-flows br0 -])
+AT_CHECK([ovs-ofctl add-flow br0 in_port=1,actions=2])
+AT_CHECK([ovs-ofctl -F nxm add-flow br0 table=1,in_port=4,actions=3])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- in_port=0 actions=output:1
- in_port=1 actions=output:0
- table=1, in_port=3 actions=output:2
+ in_port=1 actions=output:2
+ in_port=2 actions=output:1
+ table=1, in_port=4 actions=output:3
NXST_FLOW reply:
])
AT_CHECK([ovs-ofctl dump-aggregate br0 table=0 | STRIP_XIDS], [0], [dnl
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply:
])
-AT_CHECK([echo 'in_port=1,actions=0' | ovs-ofctl -F openflow10 add-flows br0 -])
-AT_CHECK([ovs-ofctl -F openflow10 add-flow br0 in_port=0,actions=1])
-AT_CHECK([ovs-ofctl -F openflow10 add-flow br0 table=1,in_port=3,actions=2])
+AT_CHECK([echo 'in_port=2,actions=1' | ovs-ofctl -F openflow10 add-flows br0 -])
+AT_CHECK([ovs-ofctl -F openflow10 add-flow br0 in_port=1,actions=2])
+AT_CHECK([ovs-ofctl -F openflow10 add-flow br0 table=1,in_port=4,actions=3])
AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0], [dnl
- in_port=0 actions=output:1
- in_port=1 actions=output:0
- table=1, in_port=3 actions=output:2
+ in_port=1 actions=output:2
+ in_port=2 actions=output:1
+ table=1, in_port=4 actions=output:3
OFPST_FLOW reply:
])
AT_CHECK([ovs-ofctl -F openflow10 dump-aggregate br0 table=0 | STRIP_XIDS], [0], [dnl
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - dump flows with cookie])
+AT_SETUP([ofproto - basic flow_mod commands (OpenFlow 1.1)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([echo 'in_port=2,actions=1' | ovs-ofctl -O OpenFlow11 add-flows br0 -])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 in_port=1,actions=2])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 table=1,in_port=4,actions=3])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=1 actions=output:2
+ in_port=2 actions=output:1
+ table=1, in_port=4 actions=output:3
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-aggregate br0 table=0 | STRIP_XIDS], [0], [dnl
+OFPST_AGGREGATE reply (OF1.1): packet_count=0 byte_count=0 flow_count=2
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply (OF1.1):
+ table=1, in_port=4 actions=output:3
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - flow_mod negative test (OpenFlow 1.1)])
+OVS_VSWITCHD_START(
+ [set bridge br0 protocols=OpenFlow10,OpenFlow11,OpenFlow12,OpenFlow13])
+AT_CHECK([ovs-ofctl add-flow -O OpenFlow11 br0 table=1,action=goto_table:2])
+
+# The error message here actually comes from ovs-ofctl, not from ovs-vswitchd,
+# but at least it's the same code in ofpacts_check() that issues the error.
+AT_CHECK([ovs-ofctl add-flow -O OpenFlow11 br0 table=1,action=goto_table:1],
+ [1], [],
+ [ovs-ofctl: actions are invalid with specified match (OFPBRC_BAD_TABLE_ID)
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - set-field flow_mod commands (NXM)])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=0])
-AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=0])
-AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 ipv6,table=1,in_port=3,actions=drop])
+AT_CHECK([ovs-ofctl add-flow br0 ipv6,table=1,in_port=3,actions=set_field:fe80:0123:4567:890a:a6ba:dbff:fefe:59fa-\>ipv6_src])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- cookie=0x1, in_port=1 actions=output:0
- cookie=0x2, in_port=2 actions=output:0
- cookie=0x3, in_port=3 actions=output:0
+ table=1, ipv6,in_port=3 actions=load:0xa6badbfffefe59fa->NXM_NX_IPV6_SRC[[0..63]],load:0xfe8001234567890a->NXM_NX_IPV6_SRC[[64..127]]
NXST_FLOW reply:
])
-AT_CHECK([ovs-ofctl dump-aggregate br0 table=0 | STRIP_XIDS], [0], [dnl
-NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=3
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - basic flow_mod commands (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply (OF1.2):
])
-AT_CHECK([ovs-ofctl dump-flows br0 cookie=0x3 | ofctl_strip | sort], [0], [dnl
- cookie=0x3, in_port=3 actions=output:0
-NXST_FLOW reply:
+AT_CHECK([echo 'in_port=2,actions=1' | ovs-ofctl -O OpenFlow12 add-flows br0 -])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=1,actions=2])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 table=1,in_port=4,actions=3])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=1 actions=output:2
+ in_port=2 actions=output:1
+ table=1, in_port=4 actions=output:3
+OFPST_FLOW reply (OF1.2):
])
-AT_CHECK([ovs-ofctl dump-aggregate br0 cookie=0x3 | STRIP_XIDS], [0], [dnl
-NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=1
+AT_CHECK([ovs-ofctl -O OpenFlow12 del-flows br0])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply (OF1.2):
])
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - dump flows with cookie mask])
+AT_SETUP([ofproto - dump flows with cookie])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=0])
-AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=0])
-AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=1])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- cookie=0x1, in_port=1 actions=output:0
- cookie=0x2, in_port=2 actions=output:0
- cookie=0x3, in_port=3 actions=output:0
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x2, in_port=2 actions=output:1
+ cookie=0x3, in_port=3 actions=output:1
NXST_FLOW reply:
])
AT_CHECK([ovs-ofctl dump-aggregate br0 table=0 | STRIP_XIDS], [0], [dnl
NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=3
])
-AT_CHECK([ovs-ofctl dump-flows br0 cookie=0x3/0x1 | ofctl_strip | sort], [0], [dnl
- cookie=0x1, in_port=1 actions=output:0
- cookie=0x3, in_port=3 actions=output:0
+AT_CHECK([ovs-ofctl dump-flows br0 cookie=0x3/-1 | ofctl_strip | sort], [0], [dnl
+ cookie=0x3, in_port=3 actions=output:1
NXST_FLOW reply:
])
-AT_CHECK([ovs-ofctl dump-aggregate br0 cookie=0x3/0x1 | STRIP_XIDS], [0], [dnl
-NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=2
+AT_CHECK([ovs-ofctl dump-aggregate br0 cookie=0x3/-1 | STRIP_XIDS], [0], [dnl
+NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=1
])
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - del flows with cookie])
+AT_SETUP([ofproto - mod flow with cookie change (OpenFlow 1.0)])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=0])
-AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=0])
-AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=0])
-AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- cookie=0x1, in_port=1 actions=output:0
- cookie=0x2, in_port=2 actions=output:0
- cookie=0x3, in_port=3 actions=output:0
-NXST_FLOW reply:
+AT_CHECK([ovs-ofctl -F openflow10 add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+OFPST_FLOW reply:
])
-AT_CHECK([ovs-ofctl del-flows br0 cookie=0x3])
-AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- cookie=0x1, in_port=1 actions=output:0
- cookie=0x2, in_port=2 actions=output:0
-NXST_FLOW reply:
+AT_CHECK([ovs-ofctl -F openflow10 mod-flows br0 cookie=0x2,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x2, in_port=1 actions=output:1
+OFPST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - del flows with cookie mask])
+AT_SETUP([ofproto - mod flow with cookie change (NXM)])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=0])
-AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=0])
-AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=0])
-AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- cookie=0x1, in_port=1 actions=output:0
- cookie=0x2, in_port=2 actions=output:0
- cookie=0x3, in_port=3 actions=output:0
+AT_CHECK([ovs-ofctl -F nxm add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
NXST_FLOW reply:
])
-AT_CHECK([ovs-ofctl del-flows br0 cookie=0x3/0x1])
-AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- cookie=0x2, in_port=2 actions=output:0
+
+AT_CHECK([ovs-ofctl -F nxm mod-flows br0 cookie=0x2,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x2, in_port=1 actions=output:1
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - flow table configuration])
+AT_SETUP([ofproto - no mod flow with cookie change (OpenFlow 1.1)])
OVS_VSWITCHD_START
-# Check the default configuration.
-(echo "OFPST_TABLE reply (xid=0x1): 255 tables
- 0: classifier: wild=0x3fffff, max=1000000, active=0
- lookup=0, matched=0"
- x=1
- while test $x -lt 255; do
- printf " %d: %-8s: wild=0x3fffff, max=1000000, active=0
- lookup=0, matched=0
-" $x table$x
- x=`expr $x + 1`
- done) > expout
-AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
-# Change the configuration.
-AT_CHECK(
- [ovs-vsctl \
- -- --id=@t0 create Flow_Table name=main \
- -- --id=@t1 create Flow_Table flow-limit=1024 \
- -- set bridge br0 'flow_tables={1=@t1,0=@t0}' \
- | perl $srcdir/uuidfilt.pl],
- [0], [<0>
-<1>
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 mod-flows br0 cookie=0x2,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+OFPST_FLOW reply (OF1.1):
])
-# Check that the configuration was updated.
-mv expout orig-expout
-(echo "OFPST_TABLE reply (xid=0x1): 255 tables
- 0: main : wild=0x3fffff, max=1000000, active=0
- lookup=0, matched=0
- 1: table1 : wild=0x3fffff, max= 1024, active=0
- lookup=0, matched=0"
- tail -n +6 orig-expout) > expout
-AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - hard limits on flow table size])
+dnl The OpenFlow 1.2 spec states that the cookie may not be modified
+AT_SETUP([ofproto - no mod flow with cookie change (OpenFlow 1.2)])
OVS_VSWITCHD_START
-# Configure a maximum of 4 flows.
-AT_CHECK(
- [ovs-vsctl \
- -- --id=@t0 create Flow_Table flow-limit=4 \
- -- set bridge br0 flow_tables:0=@t0 \
- | perl $srcdir/uuidfilt.pl],
- [0], [<0>
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+OFPST_FLOW reply (OF1.2):
])
-# Add 4 flows.
-for in_port in 1 2 3 4; do
- ovs-ofctl add-flow br0 in_port=$in_port,actions=drop
-done
+
+AT_CHECK([ovs-ofctl -O OpenFlow12 mod-flows br0 cookie=0x2,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+OFPST_FLOW reply (OF1.2):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flows based on cookie mask (OpenFlow 1.0)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=2,actions=1])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=3,actions=1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- in_port=1 actions=drop
- in_port=2 actions=drop
- in_port=3 actions=drop
- in_port=4 actions=drop
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x1, in_port=2 actions=output:1
+ cookie=0x2, in_port=3 actions=output:1
NXST_FLOW reply:
])
-# Adding another flow will be refused.
-AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop], [1], [], [stderr])
-AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
- [OFPT_ERROR: OFPFMFC_ALL_TABLES_FULL
-])
-# Also a mod-flow that would add a flow will be refused.
-AT_CHECK([ovs-ofctl mod-flows br0 in_port=5,actions=drop], [1], [], [stderr])
-AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
- [OFPT_ERROR: OFPFMFC_ALL_TABLES_FULL
+
+AT_CHECK([ovs-ofctl -F nxm mod-flows br0 cookie=0x1/0xff,actions=4])
+AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:4
+ cookie=0x1, in_port=2 actions=output:4
+ cookie=0x2, in_port=3 actions=output:1
+NXST_FLOW reply:
])
-# Replacing or modifying an existing flow is allowed.
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flows based on cookie mask (OpenFlow 1.1)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x1,in_port=2,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x2,in_port=3,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x1, in_port=2 actions=output:1
+ cookie=0x2, in_port=3 actions=output:1
+OFPST_FLOW reply (OF1.1):
+])
+
+AT_CHECK([ovs-ofctl -O OpenFlow11 mod-flows br0 cookie=0x1/0xff,actions=4])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:4
+ cookie=0x1, in_port=2 actions=output:4
+ cookie=0x2, in_port=3 actions=output:1
+OFPST_FLOW reply (OF1.1):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flows based on cookie mask (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x1,in_port=2,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x2,in_port=3,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x1, in_port=2 actions=output:1
+ cookie=0x2, in_port=3 actions=output:1
+OFPST_FLOW reply (OF1.2):
+])
+
+AT_CHECK([ovs-ofctl -O OpenFlow12 mod-flows br0 cookie=0x1/0xff,actions=4])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:4
+ cookie=0x1, in_port=2 actions=output:4
+ cookie=0x2, in_port=3 actions=output:1
+OFPST_FLOW reply (OF1.2):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl The OpenFlow 1.2 spec states that the cookie may not be modified
+AT_SETUP([ofproto - mod flows based on cookie mask with cookie change])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=2,actions=1])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=3,actions=1])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x1, in_port=2 actions=output:1
+ cookie=0x2, in_port=3 actions=output:1
+NXST_FLOW reply:
+])
+
+AT_CHECK([ovs-ofctl -F nxm mod-flows br0 cookie=1/-1,cookie=4,actions=4])
+AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x2, in_port=3 actions=output:1
+ cookie=0x4, in_port=1 actions=output:4
+ cookie=0x4, in_port=2 actions=output:4
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flow with cookie miss (mask==0) - NXM])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -F nxm mod-flows br0 in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=1 actions=output:1
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flow with cookie miss (mask==0) - OF1.1])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O openflow11 mod-flows br0 in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O openflow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=1 actions=output:1
+OFPST_FLOW reply (OF1.1):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flow with cookie miss (mask==0) - OF1.2])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O openflow12 mod-flows br0 in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O openflow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+OFPST_FLOW reply (OF1.2):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flow with cookie miss (mask!=0) - NXM])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -F nxm mod-flows br0 cookie=1/1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flow with cookie miss (mask!=0) - OF1.1])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O openflow11 mod-flows br0 cookie=1/1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O openflow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+OFPST_FLOW reply (OF1.1):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flow with cookie miss (mask!=0) - OF1.2])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O openflow12 mod-flows br0 cookie=1/1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O openflow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+OFPST_FLOW reply (OF1.2):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - del flows with cookies])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=1])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=1])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x2, in_port=2 actions=output:1
+ cookie=0x3, in_port=3 actions=output:1
+NXST_FLOW reply:
+])
+
+AT_CHECK([ovs-ofctl del-flows br0])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - del flows based on cookie])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=1])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=1])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x2, in_port=2 actions=output:1
+ cookie=0x3, in_port=3 actions=output:1
+NXST_FLOW reply:
+])
+
+AT_CHECK([ovs-ofctl del-flows br0 cookie=0x3/-1])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x2, in_port=2 actions=output:1
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - del flows based on cookie mask])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=1])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=1])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x2, in_port=2 actions=output:1
+ cookie=0x3, in_port=3 actions=output:1
+NXST_FLOW reply:
+])
+AT_CHECK([ovs-ofctl del-flows br0 cookie=0x3/0x1])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x2, in_port=2 actions=output:1
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - del flows based on table id (NXM)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,table=1,actions=1])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x2, table=1, in_port=2 actions=output:1
+NXST_FLOW reply:
+])
+AT_CHECK([ovs-ofctl del-flows br0 table=0])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x2, table=1, in_port=2 actions=output:1
+NXST_FLOW reply:
+])
+AT_CHECK([ovs-ofctl del-flows br0 table=1])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+NXST_FLOW reply:
+])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,table=1,actions=1])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x2, table=1, in_port=2 actions=output:1
+NXST_FLOW reply:
+])
+AT_CHECK([ovs-ofctl del-flows br0])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - del flows based on table id (OpenFlow 1.1)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x2,in_port=2,table=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x2, table=1, in_port=2 actions=output:1
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 table=0])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x2, table=1, in_port=2 actions=output:1
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 table=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x2,in_port=2,table=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x2, table=1, in_port=2 actions=output:1
+OFPST_FLOW reply (OF1.1):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [dnl
+OFPST_FLOW reply (OF1.1):
+ cookie=0x2, table=1, in_port=2 actions=output:1
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - del flows based on table id (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x2,in_port=2,table=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x2, table=1, in_port=2 actions=output:1
+OFPST_FLOW reply (OF1.2):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow12 del-flows br0 table=0])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x2, table=1, in_port=2 actions=output:1
+OFPST_FLOW reply (OF1.2):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow12 del-flows br0 table=1])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+OFPST_FLOW reply (OF1.2):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x1,in_port=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x2,in_port=2,table=1,actions=1])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:1
+ cookie=0x2, table=1, in_port=2 actions=output:1
+OFPST_FLOW reply (OF1.2):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow12 del-flows br0])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+OFPST_FLOW reply (OF1.2):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - flow table configuration (OpenFlow 1.0)])
+OVS_VSWITCHD_START
+# Check the default configuration.
+(echo "OFPST_TABLE reply (xid=0x2): 254 tables
+ 0: classifier: wild=0x3fffff, max=1000000, active=0
+ lookup=0, matched=0"
+ x=1
+ while test $x -lt 254; do
+ printf " %d: %-8s: wild=0x3fffff, max=1000000, active=0
+ lookup=0, matched=0
+" $x table$x
+ x=`expr $x + 1`
+ done) > expout
+AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
+# Change the configuration.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table name=main \
+ -- --id=@t1 create Flow_Table flow-limit=1024 \
+ -- set bridge br0 'flow_tables={1=@t1,0=@t0}' \
+ | ${PERL} $srcdir/uuidfilt.pl],
+ [0], [<0>
+<1>
+])
+# Check that the configuration was updated.
+mv expout orig-expout
+(echo "OFPST_TABLE reply (xid=0x2): 254 tables
+ 0: main : wild=0x3fffff, max=1000000, active=0
+ lookup=0, matched=0
+ 1: table1 : wild=0x3fffff, max= 1024, active=0
+ lookup=0, matched=0"
+ tail -n +6 orig-expout) > expout
+AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - flow table configuration (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+# Check the default configuration.
+(mid="wild=0xfffffffff, max=1000000,"
+ tail="
+ lookup=0, matched=0
+ match=0xfffffffff, instructions=0x00000007, config=0x00000003
+ write_actions=0x00000000, apply_actions=0x00000000
+ write_setfields=0x0000000fffffffff
+ apply_setfields=0x0000000fffffffff
+ metadata_match=0xffffffffffffffff
+ metadata_write=0xffffffffffffffff"
+ echo "OFPST_TABLE reply (OF1.2) (xid=0x2): 254 tables
+ 0: classifier: $mid active=0$tail"
+ x=1
+ while test $x -lt 254; do
+ printf " %d: %-8s: $mid active=0$tail
+" $x table$x
+ x=`expr $x + 1`
+ done) > expout
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-tables br0], [0], [expout])
+# Change the configuration.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table name=main \
+ -- --id=@t1 create Flow_Table flow-limit=1024 \
+ -- set bridge br0 'flow_tables={1=@t1,0=@t0}' \
+ | ${PERL} $srcdir/uuidfilt.pl],
+ [0], [<0>
+<1>
+])
+# Check that the configuration was updated.
+mv expout orig-expout
+(echo "OFPST_TABLE reply (OF1.2) (xid=0x2): 254 tables
+ 0: main : wild=0xfffffffff, max=1000000, active=0"
+ tail -n +3 orig-expout | head -7
+ echo " 1: table1 : wild=0xfffffffff, max= 1024, active=0"
+ tail -n +11 orig-expout) > expout
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-tables br0], [0], [expout])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - hard limits on flow table size (OpenFlow 1.0)])
+OVS_VSWITCHD_START
+# Configure a maximum of 4 flows.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table flow-limit=4 \
+ -- set bridge br0 flow_tables:0=@t0 \
+ | ${PERL} $srcdir/uuidfilt.pl],
+ [0], [<0>
+])
+# Add 4 flows.
+for in_port in 1 2 3 4; do
+ ovs-ofctl add-flow br0 in_port=$in_port,actions=drop
+done
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=1 actions=drop
+ in_port=2 actions=drop
+ in_port=3 actions=drop
+ in_port=4 actions=drop
+NXST_FLOW reply:
+])
+# Adding another flow will be refused.
+AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop], [1], [], [stderr])
+AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
+ [OFPT_ERROR: OFPFMFC_TABLE_FULL
+])
+# Also a mod-flow that would add a flow will be refused.
+AT_CHECK([ovs-ofctl mod-flows br0 in_port=5,actions=drop], [1], [], [stderr])
+AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
+ [OFPT_ERROR: OFPFMFC_TABLE_FULL
+])
+# Replacing or modifying an existing flow is allowed.
AT_CHECK([ovs-ofctl add-flow br0 in_port=4,actions=normal])
AT_CHECK([ovs-ofctl mod-flows br0 in_port=3,actions=output:1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - eviction upon table overflow])
+AT_SETUP([ofproto - hard limits on flow table size (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+# Configure a maximum of 4 flows.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table flow-limit=4 \
+ -- set bridge br0 flow_tables:0=@t0 \
+ | ${PERL} $srcdir/uuidfilt.pl],
+ [0], [<0>
+])
+# Add 4 flows.
+for in_port in 1 2 3 4; do
+ ovs-ofctl -O OpenFlow12 add-flow br0 in_port=$in_port,actions=drop
+done
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=1 actions=drop
+ in_port=2 actions=drop
+ in_port=3 actions=drop
+ in_port=4 actions=drop
+OFPST_FLOW reply (OF1.2):
+])
+# Adding another flow will be refused.
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=5,actions=drop], [1], [], [stderr])
+AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
+ [OFPT_ERROR (OF1.2): OFPFMFC_TABLE_FULL
+])
+# Replacing or modifying an existing flow is allowed.
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=4,actions=normal])
+AT_CHECK([ovs-ofctl -O OpenFlow12 mod-flows br0 in_port=3,actions=output:1])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=1 actions=drop
+ in_port=2 actions=drop
+ in_port=3 actions=output:1
+ in_port=4 actions=NORMAL
+OFPST_FLOW reply (OF1.2):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - eviction upon table overflow (OpenFlow 1.0)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
AT_CHECK(
[ovs-vsctl \
-- --id=@t0 create Flow_Table flow-limit=4 overflow-policy=evict \
-- set bridge br0 flow_tables:0=@t0 \
- | perl $srcdir/uuidfilt.pl],
+ | ${PERL} $srcdir/uuidfilt.pl],
[0], [<0>
])
# Add 4 flows.
AT_CHECK([ovs-ofctl add-flow br0 in_port=7,actions=normal])
AT_CHECK([ovs-ofctl add-flow br0 in_port=8,actions=drop], [1], [], [stderr])
AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
- [OFPT_ERROR: OFPFMFC_ALL_TABLES_FULL
+ [OFPT_ERROR: OFPFMFC_TABLE_FULL
])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
in_port=4 actions=NORMAL
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - eviction upon table overflow, with fairness])
+AT_SETUP([ofproto - eviction upon table overflow (OpenFlow 1.2)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
AT_CHECK(
[ovs-vsctl \
- -- --id=@t0 create Flow_Table name=evict flow-limit=4 \
- overflow-policy=evict \
- groups='"NXM_OF_IN_PORT[[]]"' \
+ -- --id=@t0 create Flow_Table flow-limit=4 overflow-policy=evict \
-- set bridge br0 flow_tables:0=@t0 \
- | perl $srcdir/uuidfilt.pl],
+ | ${PERL} $srcdir/uuidfilt.pl],
[0], [<0>
])
# Add 4 flows.
-ovs-ofctl add-flows br0 - <<EOF
-idle_timeout=10 in_port=2 dl_src=00:44:55:66:77:88 actions=drop
-idle_timeout=20 in_port=1 dl_src=00:11:22:33:44:55 actions=drop
-idle_timeout=30 in_port=1 dl_src=00:22:33:44:55:66 actions=drop
-idle_timeout=40 in_port=1 dl_src=00:33:44:55:66:77 actions=drop
-EOF
-AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
- idle_timeout=20, in_port=1,dl_src=00:11:22:33:44:55 actions=drop
- idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
- idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
-NXST_FLOW reply:
-])
+for in_port in 4 3 2 1; do
+ ovs-ofctl -O OpenFlow12 add-flow br0 idle_timeout=${in_port}0,in_port=$in_port,actions=drop
+done
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=10, in_port=1 actions=drop
+ idle_timeout=20, in_port=2 actions=drop
+ idle_timeout=30, in_port=3 actions=drop
+ idle_timeout=40, in_port=4 actions=drop
+OFPST_FLOW reply (OF1.2):
+])
+# Adding another flow will cause the one that expires soonest to be evicted.
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=5,actions=drop])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=20, in_port=2 actions=drop
+ idle_timeout=30, in_port=3 actions=drop
+ idle_timeout=40, in_port=4 actions=drop
+ in_port=5 actions=drop
+OFPST_FLOW reply (OF1.2):
+])
+# In Open Flow 1.2 a mod-flow does not ever add a flow and thus
+# has no effect on eviction
+AT_CHECK([ovs-ofctl -O OpenFlow12 mod-flows br0 in_port=6,actions=drop])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=4,actions=normal])
+AT_CHECK([ovs-ofctl -O OpenFlow12 mod-flows br0 in_port=3,actions=output:1])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=20, in_port=2 actions=drop
+ idle_timeout=30, in_port=3 actions=output:1
+ in_port=4 actions=NORMAL
+ in_port=5 actions=drop
+OFPST_FLOW reply (OF1.2):
+])
+# Flows with no timeouts at all cannot be evicted.
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=6,actions=drop])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=7,actions=normal])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=8,actions=drop], [1], [], [stderr])
+AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
+ [OFPT_ERROR (OF1.2): OFPFMFC_TABLE_FULL
+])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=4 actions=NORMAL
+ in_port=5 actions=drop
+ in_port=6 actions=drop
+ in_port=7 actions=NORMAL
+OFPST_FLOW reply (OF1.2):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - eviction upon table overflow, with fairness (OpenFlow 1.0)])
+OVS_VSWITCHD_START
+# Configure a maximum of 4 flows.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table name=evict flow-limit=4 \
+ overflow-policy=evict \
+ groups='"NXM_OF_IN_PORT[[]]"' \
+ -- set bridge br0 flow_tables:0=@t0 \
+ | ${PERL} $srcdir/uuidfilt.pl],
+ [0], [<0>
+])
+# Add 4 flows.
+ovs-ofctl add-flows br0 - <<EOF
+idle_timeout=10 in_port=2 dl_src=00:44:55:66:77:88 actions=drop
+idle_timeout=20 in_port=1 dl_src=00:11:22:33:44:55 actions=drop
+idle_timeout=30 in_port=1 dl_src=00:22:33:44:55:66 actions=drop
+idle_timeout=40 in_port=1 dl_src=00:33:44:55:66:77 actions=drop
+EOF
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
+ idle_timeout=20, in_port=1,dl_src=00:11:22:33:44:55 actions=drop
+ idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
+ idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
+NXST_FLOW reply:
+])
# Adding another flow will cause the one that expires soonest within
# the largest group (those with in_port=1) to be evicted. In this
# case this is not the same as the one that expires soonest overall
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - asynchronous message control])
+AT_SETUP([ofproto - eviction upon table overflow, with fairness (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+# Configure a maximum of 4 flows.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table name=evict flow-limit=4 \
+ overflow-policy=evict \
+ groups='"NXM_OF_IN_PORT[[]]"' \
+ -- set bridge br0 flow_tables:0=@t0 \
+ | ${PERL} $srcdir/uuidfilt.pl],
+ [0], [<0>
+])
+# Add 4 flows.
+ovs-ofctl -O OpenFlow12 add-flows br0 - <<EOF
+idle_timeout=10 in_port=2 dl_src=00:44:55:66:77:88 actions=drop
+idle_timeout=20 in_port=1 dl_src=00:11:22:33:44:55 actions=drop
+idle_timeout=30 in_port=1 dl_src=00:22:33:44:55:66 actions=drop
+idle_timeout=40 in_port=1 dl_src=00:33:44:55:66:77 actions=drop
+EOF
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
+ idle_timeout=20, in_port=1,dl_src=00:11:22:33:44:55 actions=drop
+ idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
+ idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
+OFPST_FLOW reply (OF1.2):
+])
+# Adding another flow will cause the one that expires soonest within
+# the largest group (those with in_port=1) to be evicted. In this
+# case this is not the same as the one that expires soonest overall
+# (which is what makes the test interesting):
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=2,dl_src=00:55:66:77:88:99,actions=drop])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
+ idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
+ idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
+ in_port=2,dl_src=00:55:66:77:88:99 actions=drop
+OFPST_FLOW reply (OF1.2):
+])
+# Enlarge the flow limit, change the eviction policy back to strictly
+# based on expiration, and and add some flows.
+AT_CHECK([ovs-vsctl set Flow_Table evict groups='[[]]' flow-limit=7])
+ovs-ofctl -O OpenFlow12 add-flows br0 - <<EOF
+idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=drop
+idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=drop
+idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=drop
+EOF
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
+ idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
+ idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
+ idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
+ idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
+ in_port=2,dl_src=00:55:66:77:88:99 actions=drop
+OFPST_FLOW reply (OF1.2):
+])
+# Adding another flow will cause the one that expires soonest overall
+# to be evicted.
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 'idle_timeout=80 in_port=2 dl_src=00:99:aa:bb:cc:dd actions=drop'])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
+ idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
+ idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
+ idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
+ idle_timeout=80, in_port=2,dl_src=00:99:aa:bb:cc:dd actions=drop
+ in_port=2,dl_src=00:55:66:77:88:99 actions=drop
+OFPST_FLOW reply (OF1.2):
+])
+# Reducing the flow limit also causes the flows that expire soonest
+# overall to be evicted.
+AT_CHECK([ovs-vsctl set Flow_Table evict flow-limit=4])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
+ idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
+ idle_timeout=80, in_port=2,dl_src=00:99:aa:bb:cc:dd actions=drop
+ in_port=2,dl_src=00:55:66:77:88:99 actions=drop
+OFPST_FLOW reply (OF1.2):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - eviction upon table overflow, with modified hard timeout])
+OVS_VSWITCHD_START
+# Configure a maximum of 4 flows.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table flow-limit=4 overflow-policy=evict \
+ -- set bridge br0 flow_tables:0=@t0 \
+ | ${PERL} $srcdir/uuidfilt.pl],
+ [0], [<0>
+])
+ovs-appctl time/stop
+# Add 4 flows.
+for in_port in 4 3 2 1; do
+ ovs-ofctl add-flow br0 hard_timeout=$((10 + in_port * 3)),in_port=$in_port,actions=drop
+done
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ hard_timeout=13, in_port=1 actions=drop
+ hard_timeout=16, in_port=2 actions=drop
+ hard_timeout=19, in_port=3 actions=drop
+ hard_timeout=22, in_port=4 actions=drop
+NXST_FLOW reply:
+])
+# Sleep and modify the one that expires soonest
+ovs-appctl time/warp 5000
+AT_CHECK([ovs-ofctl mod-flows br0 in_port=1,actions=drop])
+# At this point the table would looks like:
+# in_port seconds to expire
+# 1 13
+# 2 11
+# 3 14
+# 4 17
+ovs-appctl time/warp 2000
+# Adding another flow will cause the one that expires soonest to be evicted.
+AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ hard_timeout=13, in_port=1 actions=drop
+ hard_timeout=19, in_port=3 actions=drop
+ hard_timeout=22, in_port=4 actions=drop
+ in_port=5 actions=drop
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - eviction upon table overflow, with modified idle timeout])
+OVS_VSWITCHD_START([add-port br0 p1 -- set interface p1 type=dummy ofport_request=1])
+# Configure a maximum of 4 flows.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table flow-limit=4 overflow-policy=evict \
+ -- set bridge br0 flow_tables:0=@t0 \
+ | ${PERL} $srcdir/uuidfilt.pl],
+ [0], [<0>
+])
+# Add 4 flows.
+for in_port in 4 3 2 1; do
+ ovs-ofctl add-flow br0 idle_timeout=$((10 + in_port * 3)),in_port=$in_port,actions=drop
+done
+ovs-appctl time/stop
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=13, in_port=1 actions=drop
+ idle_timeout=16, in_port=2 actions=drop
+ idle_timeout=19, in_port=3 actions=drop
+ idle_timeout=22, in_port=4 actions=drop
+NXST_FLOW reply:
+])
+# Sleep and receive on the flow that expires soonest
+ovs-appctl time/warp 5000
+AT_CHECK([ovs-appctl netdev-dummy/receive p1 'in_port(1)'])
+# At this point the table would looks like:
+# in_port seconds to expire
+# 1 13
+# 2 11
+# 3 14
+# 4 17
+ovs-appctl time/warp 2000
+# Adding another flow will cause the one that expires soonest to be evicted.
+AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=19, in_port=3 actions=drop
+ idle_timeout=22, in_port=4 actions=drop
+ in_port=5 actions=drop
+ n_packets=1, n_bytes=60, idle_timeout=13, in_port=1 actions=drop
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - asynchronous message control (OpenFlow 1.0)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -P openflow10 monitor br0 --detach --no-chdir --pidfile])
check_async () {
: > expout
# OFPT_PACKET_IN, OFPR_ACTION (controller_id=0)
- ovs-ofctl -v packet-out br0 none controller '0001020304050010203040501234'
+ ovs-ofctl -v packet-out br0 controller controller '0001020304050010203040501234'
if test X"$1" = X"OFPR_ACTION"; then shift;
- echo >>expout "OFPT_PACKET_IN: total_len=14 in_port=NONE (via action) data_len=14 (unbuffered)
-priority:0,tunnel:0,in_port:0000,tci(0) mac(00:10:20:30:40:50->00:01:02:03:04:05) type:1234 proto:0 tos:0 ttl:0 ip(0.0.0.0->0.0.0.0)"
+ echo >>expout "OFPT_PACKET_IN: total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
fi
# OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
- ovs-ofctl -v packet-out br0 none 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
+ ovs-ofctl -v packet-out br0 controller 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
if test X"$1" = X"OFPR_NO_MATCH"; then shift;
- echo >>expout "OFPT_PACKET_IN: total_len=14 in_port=NONE (via no_match) data_len=14 (unbuffered)
-priority:0,tunnel:0,in_port:0000,tci(0) mac(00:10:20:30:40:50->00:01:02:03:04:05) type:1234 proto:0 tos:0 ttl:0 ip(0.0.0.0->0.0.0.0)"
+ echo >>expout "OFPT_PACKET_IN: total_len=14 in_port=CONTROLLER (via no_match) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
fi
# OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
- ovs-ofctl packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003fb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
+ ovs-ofctl packet-out br0 controller dec_ttl '002583dfb4000026b98cb0f908004500003fb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
- echo >>expout "OFPT_PACKET_IN: total_len=76 in_port=NONE (via invalid_ttl) data_len=76 (unbuffered)
-priority:0,tunnel:0,in_port:0000,tci(0) mac(00:26:b9:8c:b0:f9->00:25:83:df:b4:00) type:0800 proto:17 tos:0 ttl:0 ip(172.17.55.13->172.16.0.2) port(55155->53) udp_csum:8f6d"
+ echo >>expout "OFPT_PACKET_IN: total_len=76 in_port=CONTROLLER (via invalid_ttl) data_len=76 (unbuffered)
+udp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
fi
# OFPT_PORT_STATUS, OFPPR_ADD
- ovs-vsctl add-port br0 test -- set Interface test type=dummy
+ ovs-vsctl add-port br0 test -- set Interface test type=dummy ofport_request=1
if test X"$1" = X"OFPPR_ADD"; then shift;
echo >>expout "OFPT_PORT_STATUS: ADD: 1(test): addr:aa:55:aa:55:00:0x
config: PORT_DOWN
state: LINK_DOWN
- speed: 100 Mbps now, 100 Mbps max"
+ speed: 0 Mbps now, 0 Mbps max"
fi
# OFPT_PORT_STATUS, OFPPR_DELETE
echo >>expout "OFPT_PORT_STATUS: DEL: 1(test): addr:aa:55:aa:55:00:0x
config: PORT_DOWN
state: LINK_DOWN
- speed: 100 Mbps now, 100 Mbps max"
+ speed: 0 Mbps now, 0 Mbps max"
fi
# OFPT_FLOW_REMOVED, OFPRR_DELETE
# It's a service connection so initially there should be no async messages.
check_async 1
-# Set miss_send_len to 128, turning on packet-outs for our service connection.
+# Set miss_send_len to 128, turning on packet-ins for our service connection.
ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700000080
check_async 2 OFPR_ACTION OFPPR_ADD OFPPR_DELETE OFPRR_DELETE
ovs-appctl -t ovs-ofctl exit
OVS_VSWITCHD_STOP
AT_CLEANUP
+
+AT_SETUP([ofproto - asynchronous message control (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow12 monitor br0 --detach --no-chdir --pidfile])
+check_async () {
+ printf '\n\n--- check_async %d ---\n\n\n' $1
+ INDEX=$1
+ shift
+
+ ovs-appctl -t ovs-ofctl ofctl/barrier
+ ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+ : > expout
+
+ # OFPT_PACKET_IN, OFPR_ACTION (controller_id=0)
+ ovs-ofctl -O OpenFlow12 -v packet-out br0 none controller '0001020304050010203040501234'
+ if test X"$1" = X"OFPR_ACTION"; then shift;
+ echo >>expout "OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+ fi
+
+ # OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
+ ovs-ofctl -O OpenFlow12 -v packet-out br0 none 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
+ if test X"$1" = X"OFPR_NO_MATCH"; then shift;
+ echo >>expout "OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY (via no_match) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+ fi
+
+ # OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
+ ovs-ofctl -O OpenFlow12 packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003fb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
+ if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
+ echo >>expout "OFPT_PACKET_IN (OF1.2): total_len=76 in_port=ANY (via invalid_ttl) data_len=76 (unbuffered)
+udp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
+ fi
+
+ # OFPT_PORT_STATUS, OFPPR_ADD
+ ovs-vsctl add-port br0 test -- set Interface test type=dummy
+ if test X"$1" = X"OFPPR_ADD"; then shift;
+ echo >>expout "OFPT_PORT_STATUS (OF1.2): ADD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max"
+ fi
+
+ # OFPT_PORT_STATUS, OFPPR_DELETE
+ ovs-vsctl del-port br0 test
+ if test X"$1" = X"OFPPR_DELETE"; then shift;
+ echo >>expout "OFPT_PORT_STATUS (OF1.2): DEL: ${INDEX}(test): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max"
+ fi
+
+ # OFPT_FLOW_REMOVED, OFPRR_DELETE
+ ovs-ofctl -O OpenFlow12 add-flow br0 send_flow_rem,actions=drop
+ ovs-ofctl -O OpenFlow12 --strict del-flows br0 ''
+ if test X"$1" = X"OFPRR_DELETE"; then shift;
+ echo >>expout "OFPT_FLOW_REMOVED (OF1.2): reason=delete table_id=0"
+ fi
+ AT_FAIL_IF([test X"$1" != X])
+
+ ovs-appctl -t ovs-ofctl ofctl/barrier
+ echo >>expout "OFPT_BARRIER_REPLY (OF1.2):"
+
+ AT_CHECK(
+ [[sed '
+s/ (xid=0x[0-9a-fA-F]*)//
+s/ *duration.*//
+s/00:0.$/00:0x/' < monitor.log]],
+ [0], [expout])
+}
+
+# It's a service connection so initially there should be no async messages.
+check_async 1
+
+# Set miss_send_len to 128, turning on packet-ins for our service connection.
+ovs-appctl -t ovs-ofctl ofctl/send 0309000c0123456700000080
+check_async 2 OFPR_ACTION OFPPR_ADD OFPPR_DELETE OFPRR_DELETE
+
+# Set miss_send_len to 128 and enable invalid_ttl.
+ovs-appctl -t ovs-ofctl ofctl/send 0309000c0123456700040080
+check_async 3 OFPR_ACTION OFPR_INVALID_TTL OFPPR_ADD OFPPR_DELETE OFPRR_DELETE
+
+# Become slave (OF 1.2), which should disable everything except port status.
+ovs-appctl -t ovs-ofctl ofctl/send 031800180000000200000003000000000000000000000001
+check_async 4 OFPPR_ADD OFPPR_DELETE
+
+# Use NXT_SET_ASYNC_CONFIG to enable a patchwork of asynchronous messages.
+ovs-appctl -t ovs-ofctl ofctl/send 03040028000000020000232000000013000000020000000500000005000000020000000200000005
+check_async 5 OFPR_INVALID_TTL OFPPR_DELETE OFPRR_DELETE
+
+# Set controller ID 123.
+ovs-appctl -t ovs-ofctl ofctl/send 03040018000000030000232000000014000000000000007b
+check_async 6 OFPR_NO_MATCH OFPPR_DELETE OFPRR_DELETE
+
+# Restore controller ID 0.
+ovs-appctl -t ovs-ofctl ofctl/send 030400180000000300002320000000140000000000000000
+
+# Become master (OF 1.2).
+ovs-appctl -t ovs-ofctl ofctl/send 031800180000000400000002000000000000000000000002
+check_async 7 OFPR_ACTION OFPPR_ADD
+
+ovs-appctl -t ovs-ofctl exit
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - asynchronous message control (OpenFlow 1.3)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow13 monitor br0 --detach --no-chdir --pidfile])
+check_async () {
+ printf '\n\n--- check_async %d ---\n\n\n' $1
+ INDEX=$1
+ shift
+
+ ovs-appctl -t ovs-ofctl ofctl/barrier
+ ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+ : > expout
+
+ # OFPT_PACKET_IN, OFPR_ACTION (controller_id=0)
+ ovs-ofctl -O OpenFlow13 -v packet-out br0 none controller '0001020304050010203040501234'
+ if test X"$1" = X"OFPR_ACTION"; then shift;
+ echo >>expout "OFPT_PACKET_IN (OF1.3): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+ fi
+
+ # OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
+ ovs-ofctl -O OpenFlow13 -v packet-out br0 none 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
+ if test X"$1" = X"OFPR_NO_MATCH"; then shift;
+ echo >>expout "OFPT_PACKET_IN (OF1.3): total_len=14 in_port=ANY (via no_match) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+ fi
+
+ # OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
+ ovs-ofctl -O OpenFlow13 packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003fb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
+ if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
+ echo >>expout "OFPT_PACKET_IN (OF1.3): total_len=76 in_port=ANY (via invalid_ttl) data_len=76 (unbuffered)
+udp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
+ fi
+
+ # OFPT_PORT_STATUS, OFPPR_ADD
+ ovs-vsctl add-port br0 test -- set Interface test type=dummy
+ if test X"$1" = X"OFPPR_ADD"; then shift;
+ echo >>expout "OFPT_PORT_STATUS (OF1.3): ADD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max"
+ fi
+
+ # OFPT_PORT_STATUS, OFPPR_DELETE
+ ovs-vsctl del-port br0 test
+ if test X"$1" = X"OFPPR_DELETE"; then shift;
+ echo >>expout "OFPT_PORT_STATUS (OF1.3): DEL: ${INDEX}(test): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max"
+ fi
+
+ # OFPT_FLOW_REMOVED, OFPRR_DELETE
+ ovs-ofctl -O OpenFlow13 add-flow br0 send_flow_rem,actions=drop
+ ovs-ofctl -O OpenFlow13 --strict del-flows br0 ''
+ if test X"$1" = X"OFPRR_DELETE"; then shift;
+ echo >>expout "OFPT_FLOW_REMOVED (OF1.3): reason=delete table_id=0"
+ fi
+ AT_FAIL_IF([test X"$1" != X])
+
+ ovs-appctl -t ovs-ofctl ofctl/barrier
+ echo >>expout "OFPT_BARRIER_REPLY (OF1.3):"
+
+ AT_CHECK(
+ [[sed '
+s/ (xid=0x[0-9a-fA-F]*)//
+s/ *duration.*//
+s/00:0.$/00:0x/' < monitor.log]],
+ [0], [expout])
+}
+
+# It's a service connection so initially there should be no async messages.
+check_async 1
+
+# Set miss_send_len to 128, turning on packet-ins for our service connection.
+ovs-appctl -t ovs-ofctl ofctl/send 0409000c0123456700000080
+check_async 2 OFPR_ACTION OFPPR_ADD OFPPR_DELETE OFPRR_DELETE
+
+# Become slave (OF 1.3), which should disable everything except port status.
+ovs-appctl -t ovs-ofctl ofctl/send 041800180000000200000003000000000000000000000001
+check_async 3 OFPPR_ADD OFPPR_DELETE
+
+# Use OF 1.3 OFPT_SET_ASYNC to enable a patchwork of asynchronous messages.
+ovs-appctl -t ovs-ofctl ofctl/send 041c002000000002000000020000000500000005000000020000000200000005
+check_async 4 OFPR_INVALID_TTL OFPPR_DELETE OFPRR_DELETE
+
+# Set controller ID 123.
+ovs-appctl -t ovs-ofctl ofctl/send 04040018000000030000232000000014000000000000007b
+check_async 5 OFPR_NO_MATCH OFPPR_DELETE OFPRR_DELETE
+
+# Restore controller ID 0.
+ovs-appctl -t ovs-ofctl ofctl/send 040400180000000300002320000000140000000000000000
+
+# Become master (OF 1.3).
+ovs-appctl -t ovs-ofctl ofctl/send 041800180000000400000002000000000000000000000002
+check_async 6 OFPR_ACTION OFPPR_ADD
+
+ovs-appctl -t ovs-ofctl exit
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This test checks that the role request/response messaging works
+dnl and that generation_id is handled properly.
+AT_SETUP([ofproto - controller role (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow12 monitor br0 --detach --no-chdir --pidfile])
+
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+: > expout
+: > experr
+
+# find out current role
+ovs-appctl -t ovs-ofctl ofctl/send 031800180000000200000000000000000000000000000000
+echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x2): role=nochange"
+echo >>expout "OFPT_ROLE_REPLY (OF1.2) (xid=0x2): role=equal"
+
+# Become slave (generation_id is initially undefined, so 2^63+2 should not be stale)
+ovs-appctl -t ovs-ofctl ofctl/send 031800180000000300000003000000008000000000000002
+echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x3): role=slave generation_id=9223372036854775810"
+echo >>expout "OFPT_ROLE_REPLY (OF1.2) (xid=0x3): role=slave generation_id=9223372036854775810"
+
+# Try to become the master using a stale generation ID
+ovs-appctl -t ovs-ofctl ofctl/send 031800180000000400000002000000000000000000000002
+echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x4): role=master generation_id=2"
+echo >>expout "OFPT_ERROR (OF1.2) (xid=0x4): OFPRRFC_STALE"
+echo >>expout "OFPT_ROLE_REQUEST (OF1.2) (xid=0x4): role=master generation_id=2"
+
+# Become master using a valid generation ID
+ovs-appctl -t ovs-ofctl ofctl/send 031800180000000500000002000000000000000000000001
+echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x5): role=master generation_id=1"
+echo >>expout "OFPT_ROLE_REPLY (OF1.2) (xid=0x5): role=master generation_id=1"
+ovs-appctl -t ovs-ofctl ofctl/barrier
+echo >>expout "OFPT_BARRIER_REPLY (OF1.2) (xid=0x3):"
+
+AT_CHECK([grep -v '^send:' monitor.log], [0], [expout])
+mv experr expout
+AT_CHECK([grep '^send:' monitor.log], [0], [expout])
+
+ovs-appctl -t ovs-ofctl exit
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This test checks that OFPT_PACKET_OUT accepts both OFPP_NONE (as
+dnl specified by OpenFlow 1.0) and OFPP_CONTROLLER (used by some
+dnl controllers despite the spec) as meaning a packet that was generated
+dnl by the controller.
+AT_SETUP([ofproto - packet-out from controller (OpenFlow 1.0)])
+OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], [1])
+
+# Start a monitor listening for packet-ins.
+AT_CHECK([ovs-ofctl -P openflow10 monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700000080
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+
+# Send some packet-outs with OFPP_NONE and OFPP_CONTROLLER (65533) as in_port.
+AT_CHECK([ovs-ofctl packet-out br0 none controller,1 '0001020304050010203040501234'])
+AT_CHECK([ovs-ofctl packet-out br0 controller controller,1 '0001020304050010203040505678'])
+
+# Stop the monitor and check its output.
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+ovs-ofctl dump-ports br0
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
+OFPT_PACKET_IN: total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+OFPT_PACKET_IN: total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
+OFPT_BARRIER_REPLY:
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This test checks that OFPT_PACKET_OUT accepts both OFPP_NONE (as
+dnl specified by OpenFlow 1.2) and OFPP_CONTROLLER (used by some
+dnl controllers despite the spec) as meaning a packet that was generated
+dnl by the controller.
+AT_SETUP([ofproto - packet-out from controller (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+
+# Start a monitor listening for packet-ins.
+AT_CHECK([ovs-ofctl -O OpenFlow12 monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/send 0309000c0123456700000080
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+
+# Send some packet-outs with OFPP_NONE and OFPP_CONTROLLER (65533) as in_port.
+AT_CHECK([ovs-ofctl -O OpenFlow12 packet-out br0 none controller '0001020304050010203040501234'])
+AT_CHECK([ovs-ofctl -O OpenFlow12 packet-out br0 4294967293 controller '0001020304050010203040505678'])
+
+# Stop the monitor and check its output.
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
+OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+OFPT_PACKET_IN (OF1.2): total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
+OFPT_BARRIER_REPLY (OF1.2):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This test checks that OFPT_PACKET_OUT accepts both OFPP_NONE (as
+dnl specified by OpenFlow 1.1) and OFPP_CONTROLLER (used by some
+dnl controllers despite the spec) as meaning a packet that was generated
+dnl by the controller.
+AT_SETUP([ofproto - packet-out from controller (OpenFlow 1.1)])
+OVS_VSWITCHD_START
+
+# Start a monitor listening for packet-ins.
+AT_CHECK([ovs-ofctl -O OpenFlow11 monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/send 0209000c0123456700000080
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+
+# Send some packet-outs with OFPP_NONE and OFPP_CONTROLLER (65533) as in_port.
+AT_CHECK([ovs-ofctl -O OpenFlow11 packet-out br0 none controller '0001020304050010203040501234'])
+AT_CHECK([ovs-ofctl -O OpenFlow11 packet-out br0 4294967293 controller '0001020304050010203040505678'])
+
+# Stop the monitor and check its output.
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
+OFPT_PACKET_IN (OF1.1): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+OFPT_PACKET_IN (OF1.1): total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
+OFPT_BARRIER_REPLY (OF1.1):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This test checks that metadata is encoded in packet_in structures,
+dnl supported by NXAST.
+AT_SETUP([ofproto - packet-out with metadata (NXM)])
+OVS_VSWITCHD_START
+
+# Start a monitor listening for packet-ins.
+AT_CHECK([ovs-ofctl -P nxm monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700000080
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+
+# Send a packet-out with a load action to set some metadata, and forward to controller
+AT_CHECK([ovs-ofctl packet-out br0 controller 'load(0xfafafafa5a5a5a5a->OXM_OF_METADATA[[0..63]]), load(0xaa->NXM_NX_PKT_MARK[[]]), controller' '0001020304050010203040501234'])
+
+# Stop the monitor and check its output.
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
+NXT_PACKET_IN: total_len=14 in_port=CONTROLLER metadata=0xfafafafa5a5a5a5a pkt_mark=0xaa (via action) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+OFPT_BARRIER_REPLY:
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This test checks that metadata is encoded in packet_in structures,
+dnl supported by NXAST.
+AT_SETUP([ofproto - packet-out with metadata (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+
+# Start a monitor listening for packet-ins.
+AT_CHECK([ovs-ofctl -O OpenFlow12 monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/send 0309000c0123456700000080
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+
+# Send a packet-out with a load action to set some metadata, and forward to controller
+AT_CHECK([ovs-ofctl -O OpenFlow12 packet-out br0 none 'load(0xfafafafa5a5a5a5a->OXM_OF_METADATA[[0..63]]), controller' '0001020304050010203040501234'])
+
+# Stop the monitor and check its output.
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
+OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY metadata=0xfafafafa5a5a5a5a (via action) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+OFPT_BARRIER_REPLY (OF1.2):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This test checks that tunnel metadata is encoded in packet_in structures.
+AT_SETUP([ofproto - packet-out with tunnel metadata (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+
+# Start a monitor listening for packet-ins.
+AT_CHECK([ovs-ofctl -O OpenFlow12 monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/send 0309000c0123456700000080
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+
+# Send a packet-out with set field actions to set some tunnel metadata, and forward to controller
+AT_CHECK([ovs-ofctl -O OpenFlow12 packet-out br0 none 'set_field:127.0.0.1->tun_src,set_field:0x01020304->tun_id,set_field:192.168.0.1->tun_dst, controller' '0001020304050010203040501234'])
+
+# Stop the monitor and check its output.
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
+OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY tun_id=0x1020304 tun_src=127.0.0.1 tun_dst=192.168.0.1 (via action) data_len=14 (unbuffered)
+metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+OFPT_BARRIER_REPLY (OF1.2):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - flow monitoring])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,actions=output:1
+
+# Start a monitor watching the flow table and check the initial reply.
+ovs-ofctl monitor br0 watch: --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+ovs-appctl -t ovs-ofctl ofctl/barrier
+AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log], [0],
+ [NXST_FLOW_MONITOR reply:
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:1
+OFPT_BARRIER_REPLY:
+])
+
+# Add, delete, and modify some flows and check the updates.
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=124,actions=output:2
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,actions=output:5
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,dl_vlan_pcp=0,actions=output:6
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,dl_vlan_pcp=1,actions=output:7
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,actions=output:8
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=65535,dl_vlan_pcp=0,actions=output:9
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=65535,dl_vlan_pcp=1,actions=output:10
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=65535,actions=output:11
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=8191,dl_vlan_pcp=0,actions=output:12
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=8191,dl_vlan_pcp=1,actions=output:13
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=8191,actions=output:14
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,dl_vlan_pcp=0,actions=output:15
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,dl_vlan_pcp=1,actions=output:16
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,actions=output:17
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,dl_vlan_pcp=0,actions=output:18
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,dl_vlan_pcp=1,actions=output:19
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,actions=output:20
+ovs-ofctl add-flow br0 in_port=0,dl_vlan_pcp=0,actions=output:21
+ovs-ofctl add-flow br0 in_port=0,dl_vlan_pcp=1,actions=output:22
+ovs-ofctl add-flow br0 in_port=0,actions=output:23
+ovs-ofctl mod-flows br0 cookie=5,dl_vlan=123,actions=output:3
+ovs-ofctl del-flows br0 dl_vlan=123
+ovs-ofctl del-flows br0
+ovs-appctl -t ovs-ofctl ofctl/barrier
+sort='
+ # Sorts groups of lines that start with a space, without moving them
+ # past the nearest line that does not start with a space.
+ use warnings;
+ use strict;
+ my @buffer = ();
+ while (<STDIN>) {
+ if (/^ /) {
+ push(@buffer, $_);
+ } else {
+ print $_ foreach sort(@buffer);
+ print $_;
+ @buffer = ();
+ }
+ }
+ print $_ foreach sort(@buffer);
+'
+AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log | ${PERL} -e "$sort"], [0],
+[NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=124 actions=output:2
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:5
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123,dl_vlan_pcp=0 actions=output:6
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123,dl_vlan_pcp=1 actions=output:7
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:8
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=0 actions=output:9
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=1 actions=output:10
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,vlan_tci=0x0000 actions=output:11
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=4095,dl_vlan_pcp=0 actions=output:12
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=4095,dl_vlan_pcp=1 actions=output:13
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=4095 actions=output:14
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=0 actions=output:15
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=1 actions=output:16
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0 actions=output:17
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=0 actions=output:18
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=1 actions=output:19
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0 actions=output:20
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan_pcp=0 actions=output:21
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan_pcp=1 actions=output:22
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0 actions=output:23
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=MODIFIED table=0 cookie=0x5 in_port=0,dl_vlan=123 actions=output:3
+ event=MODIFIED table=0 cookie=0x5 in_port=0,dl_vlan=123,dl_vlan_pcp=0 actions=output:3
+ event=MODIFIED table=0 cookie=0x5 in_port=0,dl_vlan=123,dl_vlan_pcp=1 actions=output:3
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=DELETED reason=delete table=0 cookie=0x5 in_port=0,dl_vlan=123 actions=output:3
+ event=DELETED reason=delete table=0 cookie=0x5 in_port=0,dl_vlan=123,dl_vlan_pcp=0 actions=output:3
+ event=DELETED reason=delete table=0 cookie=0x5 in_port=0,dl_vlan=123,dl_vlan_pcp=1 actions=output:3
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=DELETED reason=delete table=0 cookie=0 in_port=0 actions=output:23
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=0 actions=output:20
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=0 actions=output:18
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=1 actions=output:19
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=124 actions=output:2
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=4095 actions=output:14
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=4095,dl_vlan_pcp=0 actions=output:12
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=4095,dl_vlan_pcp=1 actions=output:13
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan_pcp=0 actions=output:21
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan_pcp=1 actions=output:22
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,vlan_tci=0x0000 actions=output:11
+OFPT_BARRIER_REPLY:
+])
+
+# Check that our own changes are reported as abbreviations.
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+ovs-ofctl add-flow br0 in_port=1,actions=output:2
+ovs-ofctl add-flow br0 in_port=2,actions=output:1
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/send 010e004812345678003fffff00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000003000000000000ffffffffffff0000
+ovs-appctl -t ovs-ofctl ofctl/barrier
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip], [0], [NXST_FLOW reply:
+])
+AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log], [0],
+[NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=1 actions=output:2
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=2 actions=output:1
+OFPT_BARRIER_REPLY:
+send: OFPT_FLOW_MOD: DEL priority=0 actions=drop
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ABBREV xid=0x12345678
+OFPT_BARRIER_REPLY:
+])
+
+ovs-appctl -t ovs-ofctl exit
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - flow monitoring pause and resume])
+AT_KEYWORDS([monitor])
+
+# The maximum socket receive buffer size is important for this test, which
+# tests behavior when the receive buffer overflows.
+if test -e /proc/sys/net/core/rmem_max; then
+ # Linux
+ rmem_max=`cat /proc/sys/net/core/rmem_max`
+elif rmem_max=`sysctl -n net.inet.tcp.recvbuf_max 2>/dev/null`; then
+ : # FreeBSD, NetBSD
+else
+ # Don't know how to get maximum socket receive buffer on this OS
+ AT_SKIP_IF([:])
+fi
+# Calculate the total amount of queuing: rmem_max in the kernel, 128 kB
+# in ofproto sending userspace (see ofmonitor_flush() in connmgr.c).
+queue_size=`expr $rmem_max + 128 \* 1024`
+echo rmem_max=$rmem_max queue_size=$queue_size
+
+# If there's too much queuing skip the test to avoid timing out.
+AT_SKIP_IF([test $rmem_max -gt 1048576])
+
+# Each flow update message takes up at least 48 bytes of space in queues
+# and in practice more than that.
+n_msgs=`expr $queue_size / 48`
+echo n_msgs=$n_msgs
+
+OVS_VSWITCHD_START
+
+# Start a monitor watching the flow table, then make it block.
+ON_EXIT([kill `cat ovs-ofctl.pid`])
+ovs-ofctl monitor br0 watch: --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+ovs-appctl -t ovs-ofctl ofctl/block
+
+# Add $n_msgs flows.
+(echo "in_port=2,actions=output:2"
+${PERL} -e '
+ for ($i = 0; $i < '$n_msgs'; $i++) {
+ print "cookie=1,reg1=$i,actions=drop\n";
+ }
+') > flows.txt
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+# Check that multipart flow dumps work properly:
+AT_CHECK([ovs-ofctl diff-flows br0 flows.txt])
+AT_CHECK([ovs-ofctl add-flow br0 in_port=1,cookie=3,actions=drop])
+AT_CHECK([ovs-ofctl mod-flows br0 in_port=2,cookie=2,actions=output:2])
+AT_CHECK([ovs-ofctl del-flows br0 cookie=1/-1])
+
+ovs-appctl -t ovs-ofctl ofctl/unblock
+
+# Wait for the connection resumed.
+# A barrier doesn't work for this purpose.
+# https://www.mail-archive.com/dev@openvswitch.org/msg27013.html
+# https://www.mail-archive.com/dev@openvswitch.org/msg27675.html
+OVS_WAIT_UNTIL([grep NXT_FLOW_MONITOR_RESUMED monitor.log])
+
+ovs-appctl -t ovs-ofctl exit
+
+# Check that the flow monitor reported the same number of flows
+# added and deleted, but fewer than we actually added and deleted.
+adds=`grep -c 'ADDED.*reg1=' monitor.log`
+deletes=`grep -c 'DELETED.*reg1=' monitor.log`
+echo adds=$adds deletes=$deletes
+AT_CHECK([test $adds -gt 100 && test $adds -lt $n_msgs])
+AT_CHECK([test $adds = $deletes])
+
+# Check that the flow monitor reported everything in the expected order:
+#
+# event=ADDED table=0 cookie=0x1 reg1=0x22
+# ...
+# NXT_FLOW_MONITOR_PAUSED:
+# ...
+# event=DELETED reason=delete table=0 cookie=0x1 reg1=0x22
+# ...
+# event=ADDED table=0 cookie=0x3 in_port=1
+# event=MODIFIED table=0 cookie=0x2 in_port=2 actions=output:2
+# NXT_FLOW_MONITOR_RESUMED:
+#
+# except that, between the PAUSED and RESUMED, the order of the ADDED
+# and MODIFIED lines lines depends on hash order, that is, it varies
+# as we change the hash function or change architecture. Therefore,
+# we use a couple of tests below to accept both orders.
+AT_CHECK([ofctl_strip < monitor.log | sed -n -e '
+/reg1=0x22$/p
+/cookie=0x[[23]]/p
+/NXT_FLOW_MONITOR_PAUSED:/p
+/NXT_FLOW_MONITOR_RESUMED:/p
+' > monitor.log.subset])
+AT_CHECK([grep -v MODIFIED monitor.log.subset], [0], [dnl
+ event=ADDED table=0 cookie=0x1 reg1=0x22
+NXT_FLOW_MONITOR_PAUSED:
+ event=DELETED reason=delete table=0 cookie=0x1 reg1=0x22
+ event=ADDED table=0 cookie=0x3 in_port=1
+NXT_FLOW_MONITOR_RESUMED:
+])
+AT_CHECK([grep -v ADDED monitor.log.subset], [0], [dnl
+NXT_FLOW_MONITOR_PAUSED:
+ event=DELETED reason=delete table=0 cookie=0x1 reg1=0x22
+ event=MODIFIED table=0 cookie=0x2 in_port=2 actions=output:2
+NXT_FLOW_MONITOR_RESUMED:
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - event filtering (OpenFlow 1.3)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+# Start a monitor, use the required protocol version
+ovs-ofctl -O OpenFlow13 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+
+# Send an OpenFlow13 message (04), OFPT_GET_ASYNC_REQUEST (1a), length (8), xid (0a)
+ovs-appctl -t ovs-ofctl ofctl/send 041a00080000000a
+ovs-appctl -t ovs-ofctl ofctl/barrier
+
+# Check default setting
+read -r -d '' expected <<'EOF'
+EOF
+
+AT_CHECK([ofctl_strip < monitor.log], [], [dnl
+send: OFPT_GET_ASYNC_REQUEST (OF1.3):
+OFPT_GET_ASYNC_REPLY (OF1.3):
+ master:
+ PACKET_IN: no_match action
+ PORT_STATUS: add delete modify
+ FLOW_REMOVED: idle hard delete
+
+ slave:
+ PACKET_IN: (off)
+ PORT_STATUS: add delete modify
+ FLOW_REMOVED: (off)
+OFPT_BARRIER_REPLY (OF1.3):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - ofport_request])
+OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], [1], [2], [3])
+
+set_and_check_specific_ofports () {
+ ovs-vsctl set Interface p1 ofport_request="$1" -- \
+ set Interface p2 ofport_request="$2" -- \
+ set Interface p3 ofport_request="$3"
+ ofports=`ovs-vsctl get Interface p1 ofport -- \
+ get Interface p2 ofport -- \
+ get Interface p3 ofport`
+ AT_CHECK_UNQUOTED([echo $ofports], [0], [$1 $2 $3
+])
+}
+for pre in '1 2 3' '1 3 2' '2 1 3' '2 3 1' '3 1 2' '3 2 1'; do
+ for post in '1 2 3' '1 3 2' '2 1 3' '2 3 1' '3 1 2' '3 2 1'; do
+ echo -----------------------------------------------------------
+ echo "Check changing port numbers from $pre to $post"
+ set_and_check_ofports $pre
+ set_and_check_ofports $post
+ done
+done
+
+ovs-vsctl del-port p3
+
+set_and_check_poorly_specified_ofports () {
+ ovs-vsctl set Interface p1 ofport_request="$1" -- \
+ set Interface p2 ofport_request="$2"
+ p1=`ovs-vsctl get Interface p1 ofport`
+ p2=`ovs-vsctl get Interface p2 ofport`
+ echo $p1 $p2
+
+ AT_CHECK([test "$p1" != "$p2"])
+ if test "$1" = "$2" && test "$1" != '[[]]'; then
+ # One port number must be the requested one.
+ AT_CHECK([test "$p1" = "$1" || test "$p2" = "$1"])
+ # The other port number must be different (already tested above).
+ else
+ AT_CHECK([test "$1" = '[[]]' || test "$p1" == "$1"])
+ AT_CHECK([test "$2" = '[[]]' || test "$p2" == "$2"])
+ fi
+}
+for pre in '1 2' '[[]] 2' '1 [[]]' '[[]] [[]]' '2 1' '[[]] 1' '2 [[]]' \
+ '1 1' '2 2'; do
+ for post in '1 2' '[[]] 2' '1 [[]]' '[[]] [[]]' '2 1' '[[]] 1' '2 [[]]' \
+ '1 1' '2 2'; do
+ echo -----------------------------------------------------------
+ echo "Check changing port numbers from $pre to $post"
+ set_and_check_poorly_specified_ofports $pre
+ set_and_check_poorly_specified_ofports $post
+ done
+done
+OVS_VSWITCHD_STOP
+AT_CLEANUP
git://git.onelab.eu / sliver-openvswitch.git / blobdiff