AT_BANNER([ovs-ofctl])
+AT_SETUP([ovs-ofctl parse-flows choice of protocol])
+# This doesn't cover some potential vlan_tci test cases.
+for test_case in \
+ 'tun_id=0 NXM,OXM' \
+ 'tun_src=1.2.3.4 NXM,OXM' \
+ 'tun_dst=1.2.3.4 NXM,OXM' \
+ 'tun_flags=0 none' \
+ 'tun_tos=0 none' \
+ 'tun_ttl=0 none' \
+ 'metadata=0 NXM,OXM' \
+ 'in_port=1 any' \
+ 'skb_priority=0 none' \
+ 'skb_mark=1 none' \
+ 'reg0=0 NXM,OXM' \
+ 'reg1=1 NXM,OXM' \
+ 'reg2=2 NXM,OXM' \
+ 'reg3=3 NXM,OXM' \
+ 'reg4=4 NXM,OXM' \
+ 'reg5=5 NXM,OXM' \
+ 'reg6=6 NXM,OXM' \
+ 'reg7=7 NXM,OXM' \
+ 'dl_src=00:11:22:33:44:55 any' \
+ 'dl_src=00:11:22:33:44:55/00:ff:ff:ff:ff:ff NXM,OXM' \
+ 'dl_dst=00:11:22:33:44:55 any' \
+ 'dl_dst=00:11:22:33:44:55/00:ff:ff:ff:ff:ff NXM,OXM' \
+ 'dl_type=0x1234 any' \
+ 'dl_type=0x0800 any' \
+ 'dl_type=0x0806 any' \
+ 'dl_type=0x86dd any' \
+ 'vlan_tci=0 any' \
+ 'vlan_tci=0x1009 any' \
+ 'dl_vlan=9 any' \
+ 'vlan_vid=11 any' \
+ 'dl_vlan_pcp=6 any' \
+ 'vlan_pcp=5 any' \
+ 'mpls,mpls_label=5 NXM,OXM' \
+ 'mpls,mpls_tc=1 NXM,OXM' \
+ 'mpls,mpls_bos=0 NXM,OXM' \
+ 'ip,ip_src=1.2.3.4 any' \
+ 'ip,ip_src=192.168.0.0/24 any' \
+ 'ip,ip_src=192.0.168.0/255.0.255.0 NXM,OXM' \
+ 'ip,ip_dst=1.2.3.4 any' \
+ 'ip,ip_dst=192.168.0.0/24 any' \
+ 'ip,ip_dst=192.0.168.0/255.0.255.0 NXM,OXM' \
+ 'ipv6,ipv6_src=::1 NXM,OXM' \
+ 'ipv6,ipv6_dst=::1 NXM,OXM' \
+ 'ipv6,ipv6_label=5 NXM,OXM' \
+ 'ip,nw_proto=1 any' \
+ 'ipv6,nw_proto=1 NXM,OXM' \
+ 'ip,nw_tos=0xf0 any' \
+ 'ipv6,nw_tos=0xf0 NXM,OXM' \
+ 'ip,nw_tos_shifted=0x3c any' \
+ 'ipv6,nw_tos_shifted=0x3c NXM,OXM' \
+ 'ip,nw_ecn=1 NXM,OXM' \
+ 'ipv6,nw_ecn=1 NXM,OXM' \
+ 'ip,nw_ttl=5 NXM,OXM' \
+ 'ipv6,nw_ttl=5 NXM,OXM' \
+ 'ip,ip_frag=no NXM,OXM' \
+ 'ipv6,ip_frag=no NXM,OXM' \
+ 'arp,arp_op=0 any' \
+ 'arp,arp_spa=1.2.3.4 any' \
+ 'arp,arp_tpa=1.2.3.4 any' \
+ 'arp,arp_sha=00:11:22:33:44:55 NXM,OXM' \
+ 'arp,arp_tha=00:11:22:33:44:55 NXM,OXM' \
+ 'tcp,tcp_src=80 any' \
+ 'tcp,tcp_src=0x1000/0x1000 NXM,OXM' \
+ 'tcp6,tcp_src=80 NXM,OXM' \
+ 'tcp6,tcp_src=0x1000/0x1000 NXM,OXM' \
+ 'tcp,tcp_dst=80 any' \
+ 'tcp,tcp_dst=0x1000/0x1000 NXM,OXM' \
+ 'tcp6,tcp_dst=80 NXM,OXM' \
+ 'tcp6,tcp_dst=0x1000/0x1000 NXM,OXM' \
+ 'udp,udp_src=80 any' \
+ 'udp,udp_src=0x1000/0x1000 NXM,OXM' \
+ 'udp6,udp_src=80 NXM,OXM' \
+ 'udp6,udp_src=0x1000/0x1000 NXM,OXM' \
+ 'udp,udp_dst=80 any' \
+ 'udp,udp_dst=0x1000/0x1000 NXM,OXM' \
+ 'udp6,udp_dst=80 NXM,OXM' \
+ 'udp6,udp_dst=0x1000/0x1000 NXM,OXM' \
+ 'icmp,icmp_type=1 any' \
+ 'icmp,icmp_type=1 any' \
+ 'icmp6,icmpv6_type=1 NXM,OXM' \
+ 'icmp6,icmpv6_code=2 NXM,OXM'
+do
+ set $test_case
+ echo
+ echo "### test case: '$1' should have usable protocols '$2'"
+ if test "$2" = none; then
+ AT_CHECK([ovs-ofctl parse-flow "$1,actions=drop"], [1],
+ [usable protocols: none
+],
+ [ovs-ofctl: no usable protocol
+])
+ else
+ AT_CHECK_UNQUOTED([ovs-ofctl parse-flow "$1,actions=drop" | sed 1q], [0],
+ [usable protocols: $2
+])
+ fi
+done
+AT_CLEANUP
+
AT_SETUP([ovs-ofctl parse-flows (OpenFlow 1.0)])
AT_DATA([flows.txt], [[
# comment
AT_CHECK([ovs-ofctl --protocols OpenFlow12 parse-flows flows.txt
], [0], [stdout])
AT_CHECK([[sed 's/ (xid=0x[0-9a-fA-F]*)//' stdout]], [0],
-[[usable protocols: NXM,OXM
+[[usable protocols: any
chosen protocol: OXM-OpenFlow12
OFPT_FLOW_MOD (OF1.2): ADD table:255 tcp,tp_src=123 actions=FLOOD
OFPT_FLOW_MOD (OF1.2): ADD table:255 in_port=LOCAL,dl_vlan=9,dl_src=00:0a:e4:25:6b:b0 actions=drop
git://git.onelab.eu / sliver-openvswitch.git / blobdiff