debian/openvswitch-switch.postinst \
debian/openvswitch-switch.postrm \
debian/openvswitch-switch.template \
+ debian/openvswitch-switch.links \
debian/openvswitch-test.dirs \
debian/openvswitch-test.install \
debian/openvswitch-test.manpages \
debian/python-openvswitch.install \
debian/rules \
debian/rules.modules \
+ debian/ifupdown.sh \
debian/source/format
check-debian-changelog-version:
--- /dev/null
+#! /bin/sh
+
+# Copyright (c) 2012 Nicira, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Have a look at /usr/share/doc/openvswitch-switch/README.Debian
+# for more information about configuring the /etc/network/interfaces.
+
+if [ -z "${IF_OVS_TYPE}" ]; then
+ exit 0
+fi
+
+ovs_vsctl() {
+ ovs-vsctl --no-wait --timeout=5 "$@"
+}
+
+if (ovs_vsctl --version) > /dev/null 2>&1; then :; else
+ exit 0
+fi
+
+if [ "${MODE}" = "start" ]; then
+ eval OVS_EXTRA=\"${IF_OVS_EXTRA}\"
+
+ case "${IF_OVS_TYPE}" in
+ OVSBridge)
+ ovs_vsctl -- --may-exist add-br "${IFACE}" ${IF_OVS_OPTIONS}\
+ ${OVS_EXTRA+-- $OVS_EXTRA}
+
+ if [ ! -z "${IF_OVS_PORTS}" ]; then
+ ifup --allow="${IFACE}" ${IF_OVS_PORTS}
+ fi
+ ;;
+ OVSPort)
+ ovs_vsctl -- --may-exist add-port "${IF_OVS_BRIDGE}"\
+ "${IFACE}" ${IF_OVS_OPTIONS} \
+ ${OVS_EXTRA+-- $OVS_EXTRA}
+
+ ifconfig "${IFACE}" up
+ ;;
+ OVSIntPort)
+ ovs_vsctl -- --may-exist add-port "${IF_OVS_BRIDGE}"\
+ "${IFACE}" ${IF_OVS_OPTIONS} -- set Interface "${IFACE}"\
+ type=internal ${OVS_EXTRA+-- $OVS_EXTRA}
+
+ ifconfig "${IFACE}" up
+ ;;
+ OVSBond)
+ ovs_vsctl -- --fake-iface add-bond "${IF_OVS_BRIDGE}"\
+ "${IFACE}" ${IF_OVS_BONDS} ${IF_OVS_OPTIONS} \
+ ${OVS_EXTRA+-- $OVS_EXTRA}
+
+ ifconfig "${IFACE}" up
+ ;;
+ *)
+ exit 0
+ ;;
+ esac
+elif [ "${MODE}" = "stop" ]; then
+ case "${IF_OVS_TYPE}" in
+ OVSBridge)
+ if [ ! -z "${IF_OVS_PORTS}" ]; then
+ ifdown --allow="${IFACE}" ${IF_OVS_PORTS}
+ fi
+
+ ovs_vsctl -- --if-exists del-br "${IFACE}"
+ ;;
+ OVSPort|OVSIntPort|OVSBond)
+ ovs_vsctl -- --if-exists del-port "${IF_OVS_BRIDGE}" "${IFACE}"
+ ;;
+ *)
+ exit 0
+ ;;
+ esac
+fi
+
+exit 0
switch implementation.
-- Ben Pfaff <blp@nicira.com>, Mon, 30 Aug 2010 09:51:19 -0700
+
+Debian network scripts integration
+----------------------------------
+This package lets a user to optionally configure Open vSwitch bridges
+and ports from /etc/network/interfaces. Please refer to the interfaces(5)
+manpage for more details regarding /etc/network/interfaces.
+
+The stanzas that configure the OVS bridges should begin with "allow-ovs"
+followed by name of the bridge. Here is an example.
+allow-ovs br0
+
+The stanzas that configure the OVS ports should begin with
+"allow-${bridge-name}" followed by name of the port. Here is an example.
+allow-br0 eth0
+
+The following OVS specific "command" options are supported:
+
+ - ovs_type: This can either be OVSBridge, OVSPort, OVSIntPort or OVSBond
+ depending on whether you configure a bridge, port, an internal port or
+ a bond. This is a required option.
+
+ - ovs_ports: This option specifies all the ports that belong to a bridge.
+
+ - ovs_bridge: This options specifies a bridge to which a port belongs.
+ This is a required option for a port.
+
+ - ovs_bonds: This option specifies the list of physical interfaces to be
+ bonded together.
+
+ - ovs_options: This option lets you add extra arguments to a ovs-vsctl
+ command. See examples.
+
+ - ovs_extra: This option lets you run additional ovs-vsctl commands,
+ separated by "--" (double dash). Variables can be part of the "ovs_extra"
+ option. You can provide all the standard environmental variables
+ described in the interfaces(5) man page. You can also pass shell
+ commands.
+
+More implementation specific details can be seen in the examples.
+
+Examples:
+--------
+ex 1: A standalone bridge.
+
+allow-ovs br0
+iface br0 inet static
+ address 192.168.1.1
+ netmask 255.255.255.0
+ ovs_type OVSBridge
+
+ex 2: A bridge with one port.
+
+allow-ovs br0
+iface br0 inet dhcp
+ ovs_type OVSBridge
+ ovs_ports eth0
+
+allow-br0 eth0
+iface eth0 inet manual
+ ovs_bridge br0
+ ovs_type OVSPort
+
+ex 3: A bridge with multiple physical ports.
+
+allow-ovs br0
+iface br0 inet dhcp
+ ovs_type OVSBridge
+ ovs_ports eth0 eth1
+
+allow-br0 eth0
+iface eth0 inet manual
+ ovs_bridge br0
+ ovs_type OVSPort
+
+allow-br0 eth1
+iface eth1 inet manual
+ ovs_bridge br0
+ ovs_type OVSPort
+
+ex 4: A bridge with an OVS internal port.
+
+allow-ovs br1
+iface br1 inet static
+ address 192.168.1.1
+ netmask 255.255.255.0
+ ovs_type OVSBridge
+ ovs_ports vlan100
+
+allow-br1 vlan100
+iface vlan100 inet manual
+ ovs_bridge br1
+ ovs_type OVSIntPort
+ ovs_options tag=100
+ ovs_extra set interface ${IFACE} external-ids:iface-id=$(hostname -s)
+
+ex 5: Bonding.
+
+allow-ovs br2
+iface br2 inet static
+ address 192.170.1.1
+ netmask 255.255.255.0
+ ovs_type OVSBridge
+ ovs_ports bond0
+
+allow-br2 bond0
+iface bond0 inet manual
+ ovs_bridge br2
+ ovs_type OVSBond
+ ovs_bonds eth2 eth3
+ ovs_options bond_mode=balance-tcp lacp=active
+
+ex 6: Create and destroy bridges.
+
+ifup --allow=ovs $list_of_bridges
+ifdown --allow=ovs $list_of_bridges
+
+-- Gurucharan Shetty <gshetty@nicira.com>, Fri, 04 May 2012 12:58:19 -0700
usr/share/openvswitch/scripts/ovs-lib
usr/share/openvswitch/scripts/ovs-save
usr/share/openvswitch/vswitch.ovsschema
+debian/ifupdown.sh usr/share/openvswitch/scripts
--- /dev/null
+usr/share/openvswitch/scripts/ifupdown.sh etc/network/if-pre-up.d/openvswitch
+usr/share/openvswitch/scripts/ifupdown.sh etc/network/if-post-down.d/openvswitch
$(MAKE) -C _debian DESTDIR=$(CURDIR)/debian/tmp install
cp debian/openvswitch-switch.template debian/openvswitch-switch/usr/share/openvswitch/switch/default.template
dh_install -s
+ dh_link -s
# Must not depend on anything. This is to be called by
# binary-arch/binary-indep
git://git.onelab.eu / sliver-openvswitch.git / commitdiff