--- /dev/null
+/* Copyright (c) 2010 Nicira Networks
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <config.h>
+
+#include <assert.h>
+#include <ctype.h>
+#include <dirent.h>
+#include <errno.h>
+#if HAVE_MNTENT_H
+#include <mntent.h>
+#endif
+#include <signal.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#if HAVE_SYS_STATVFS_H
+#include <sys/statvfs.h>
+#endif
+#include <unistd.h>
+
+#include "daemon.h"
+#include "dirs.h"
+#include "dynamic-string.h"
+#include "shash.h"
+#include "system-stats.h"
+#include "timeval.h"
+#include "vlog.h"
+
+VLOG_DEFINE_THIS_MODULE(system_stats)
+
+/* #ifdefs make it a pain to maintain code: you have to try to build both ways.
+ * Thus, this file tries to compile as much of the code as possible regardless
+ * of the target, by writing "if (LINUX)" instead of "#ifdef __linux__" where
+ * this is possible. */
+#ifdef __linux__
+#include <asm/param.h>
+#define LINUX 1
+#else
+#define LINUX 0
+#endif
+
+static void
+get_cpu_cores(struct shash *stats)
+{
+ long int n_cores = sysconf(_SC_NPROCESSORS_ONLN);
+ if (n_cores > 0) {
+ shash_add(stats, "cpu", xasprintf("%ld", n_cores));
+ }
+}
+
+static void
+get_load_average(struct shash *stats OVS_UNUSED)
+{
+#if HAVE_GETLOADAVG
+ double loadavg[3];
+
+ if (getloadavg(loadavg, 3) == 3) {
+ shash_add(stats, "load_average",
+ xasprintf("%.2f,%.2f,%.2f",
+ loadavg[0], loadavg[1], loadavg[2]));
+ }
+#endif
+}
+
+static unsigned int
+get_page_size(void)
+{
+ static unsigned int cached;
+
+ if (!cached) {
+ long int value = sysconf(_SC_PAGESIZE);
+ if (value >= 0) {
+ cached = value;
+ }
+ }
+
+ return cached;
+}
+
+static void
+get_memory_stats(struct shash *stats)
+{
+ if (!LINUX) {
+ unsigned int pagesize = get_page_size();
+ long int phys_pages = sysconf(_SC_PHYS_PAGES);
+ long int avphys_pages = sysconf(_SC_AVPHYS_PAGES);
+ int mem_total, mem_used;
+
+ if (pagesize <= 0 || phys_pages <= 0 || avphys_pages <= 0) {
+ return;
+ }
+
+ mem_total = phys_pages * (pagesize / 1024);
+ mem_used = (phys_pages - avphys_pages) * (pagesize / 1024);
+ shash_add(stats, "memory", xasprintf("%d,%d", mem_total, mem_used));
+ } else {
+ static const char file_name[] = "/proc/meminfo";
+ int mem_used, mem_cache, swap_used;
+ int mem_free = 0;
+ int buffers = 0;
+ int cached = 0;
+ int swap_free = 0;
+ int mem_total = 0;
+ int swap_total = 0;
+ struct shash dict;
+ char line[128];
+ FILE *stream;
+
+ stream = fopen(file_name, "r");
+ if (!stream) {
+ VLOG_WARN_ONCE("%s: open failed (%s)", file_name, strerror(errno));
+ return;
+ }
+
+ shash_init(&dict);
+ shash_add(&dict, "MemTotal", &mem_total);
+ shash_add(&dict, "MemFree", &mem_free);
+ shash_add(&dict, "Buffers", &buffers);
+ shash_add(&dict, "Cached", &cached);
+ shash_add(&dict, "SwapTotal", &swap_total);
+ shash_add(&dict, "SwapFree", &swap_free);
+ while (fgets(line, sizeof line, stream)) {
+ char key[16];
+ int value;
+
+ if (sscanf(line, "%15[^:]: %u", key, &value) == 2) {
+ int *valuep = shash_find_data(&dict, key);
+ if (valuep) {
+ *valuep = value;
+ }
+ }
+ }
+ fclose(stream);
+ shash_destroy(&dict);
+
+ mem_used = mem_total - mem_free;
+ mem_cache = buffers + cached;
+ swap_used = swap_total - swap_free;
+ shash_add(stats, "memory",
+ xasprintf("%d,%d,%d,%d,%d", mem_total, mem_used, mem_cache,
+ swap_total, swap_used));
+ }
+}
+
+/* Returns the time at which the system booted, as the number of milliseconds
+ * since the epoch, or 0 if the time of boot cannot be determined. */
+static long long int
+get_boot_time(void)
+{
+ static long long int cache_expiration = LLONG_MIN;
+ static long long int boot_time;
+
+ assert(LINUX);
+
+ if (time_msec() >= cache_expiration) {
+ static const char stat_file[] = "/proc/stat";
+ char line[128];
+ FILE *stream;
+
+ cache_expiration = time_msec() + 5 * 1000;
+
+ stream = fopen(stat_file, "r");
+ if (!stream) {
+ VLOG_ERR_ONCE("%s: open failed (%s)", stat_file, strerror(errno));
+ return boot_time;
+ }
+
+ while (fgets(line, sizeof line, stream)) {
+ long long int btime;
+ if (sscanf(line, "btime %lld", &btime) == 1) {
+ boot_time = btime * 1000;
+ goto done;
+ }
+ }
+ VLOG_ERR_ONCE("%s: btime not found", stat_file);
+ done:
+ fclose(stream);
+ }
+ return boot_time;
+}
+
+static unsigned long long int
+ticks_to_ms(unsigned long long int ticks)
+{
+ assert(LINUX);
+
+#ifndef USER_HZ
+#define USER_HZ 100
+#endif
+
+#if USER_HZ == 100 /* Common case. */
+ return ticks * (1000 / USER_HZ);
+#else /* Alpha and some other architectures. */
+ double factor = 1000.0 / USER_HZ;
+ return ticks * factor + 0.5;
+#endif
+}
+
+struct raw_process_info {
+ unsigned long int vsz; /* Virtual size, in kB. */
+ unsigned long int rss; /* Resident set size, in kB. */
+ long long int uptime; /* ms since started. */
+ long long int cputime; /* ms of CPU used during 'uptime'. */
+ pid_t ppid; /* Parent. */
+ char name[18]; /* Name (surrounded by parentheses). */
+};
+
+static bool
+get_raw_process_info(pid_t pid, struct raw_process_info *raw)
+{
+ unsigned long long int vsize, rss, start_time, utime, stime;
+ long long int start_msec;
+ unsigned long ppid;
+ char file_name[128];
+ FILE *stream;
+ int n;
+
+ assert(LINUX);
+
+ sprintf(file_name, "/proc/%lu/stat", (unsigned long int) pid);
+ stream = fopen(file_name, "r");
+ if (!stream) {
+ VLOG_ERR_ONCE("%s: open failed (%s)", file_name, strerror(errno));
+ return false;
+ }
+
+ n = fscanf(stream,
+ "%*d " /* (1. pid) */
+ "%17s " /* 2. process name */
+ "%*c " /* (3. state) */
+ "%lu " /* 4. ppid */
+ "%*d " /* (5. pgid) */
+ "%*d " /* (6. sid) */
+ "%*d " /* (7. tty_nr) */
+ "%*d " /* (8. tty_pgrp) */
+ "%*u " /* (9. flags) */
+ "%*u " /* (10. min_flt) */
+ "%*u " /* (11. cmin_flt) */
+ "%*u " /* (12. maj_flt) */
+ "%*u " /* (13. cmaj_flt) */
+ "%llu " /* 14. utime */
+ "%llu " /* 15. stime */
+ "%*d " /* (16. cutime) */
+ "%*d " /* (17. cstime) */
+ "%*d " /* (18. priority) */
+ "%*d " /* (19. nice) */
+ "%*d " /* (20. num_threads) */
+ "%*d " /* (21. always 0) */
+ "%llu " /* 22. start_time */
+ "%llu " /* 23. vsize */
+ "%llu " /* 24. rss */
+#if 0
+ /* These are here for documentation but #if'd out to save
+ * actually parsing them from the stream for no benefit. */
+ "%*lu " /* (25. rsslim) */
+ "%*lu " /* (26. start_code) */
+ "%*lu " /* (27. end_code) */
+ "%*lu " /* (28. start_stack) */
+ "%*lu " /* (29. esp) */
+ "%*lu " /* (30. eip) */
+ "%*lu " /* (31. pending signals) */
+ "%*lu " /* (32. blocked signals) */
+ "%*lu " /* (33. ignored signals) */
+ "%*lu " /* (34. caught signals) */
+ "%*lu " /* (35. whcan) */
+ "%*lu " /* (36. always 0) */
+ "%*lu " /* (37. always 0) */
+ "%*d " /* (38. exit_signal) */
+ "%*d " /* (39. task_cpu) */
+ "%*u " /* (40. rt_priority) */
+ "%*u " /* (41. policy) */
+ "%*llu " /* (42. blkio_ticks) */
+ "%*lu " /* (43. gtime) */
+ "%*ld" /* (44. cgtime) */
+#endif
+ , raw->name, &ppid, &utime, &stime, &start_time, &vsize, &rss);
+ fclose(stream);
+ if (n != 7) {
+ VLOG_ERR_ONCE("%s: fscanf failed", file_name);
+ return false;
+ }
+
+ start_msec = get_boot_time() + ticks_to_ms(start_time);
+
+ raw->vsz = vsize / 1024;
+ raw->rss = rss * (getpagesize() / 1024);
+ raw->uptime = time_wall_msec() - start_msec;
+ raw->cputime = ticks_to_ms(utime + stime);
+ raw->ppid = ppid;
+
+ return true;
+}
+
+static int
+count_crashes(pid_t pid)
+{
+ char file_name[128];
+ const char *paren;
+ char line[128];
+ int crashes = 0;
+ FILE *stream;
+
+ assert(LINUX);
+
+ sprintf(file_name, "/proc/%lu/cmdline", (unsigned long int) pid);
+ stream = fopen(file_name, "r");
+ if (!stream) {
+ VLOG_WARN_ONCE("%s: open failed (%s)", file_name, strerror(errno));
+ goto exit;
+ }
+
+ if (!fgets(line, sizeof line, stream)) {
+ VLOG_WARN_ONCE("%s: read failed (%s)", file_name,
+ feof(stream) ? "end of file" : strerror(errno));
+ goto exit_close;
+ }
+
+ paren = strchr(line, '(');
+ if (paren) {
+ int x;
+ if (sscanf(paren + 1, "%d", &x) == 1) {
+ crashes = x;
+ }
+ }
+
+exit_close:
+ fclose(stream);
+exit:
+ return crashes;
+}
+
+struct process_info {
+ unsigned long int vsz; /* Virtual size, in kB. */
+ unsigned long int rss; /* Resident set size, in kB. */
+ long long int booted; /* ms since monitor started. */
+ int crashes; /* # of crashes (usually 0). */
+ long long int uptime; /* ms since last (re)started by monitor. */
+ long long int cputime; /* ms of CPU used during 'uptime'. */
+};
+
+static bool
+get_process_info(pid_t pid, struct process_info *pinfo)
+{
+ struct raw_process_info child;
+
+ assert(LINUX);
+ if (!get_raw_process_info(pid, &child)) {
+ return false;
+ }
+
+ pinfo->vsz = child.vsz;
+ pinfo->rss = child.rss;
+ pinfo->booted = child.uptime;
+ pinfo->crashes = 0;
+ pinfo->uptime = child.uptime;
+ pinfo->cputime = child.cputime;
+
+ if (child.ppid) {
+ struct raw_process_info parent;
+
+ get_raw_process_info(child.ppid, &parent);
+ if (!strcmp(child.name, parent.name)) {
+ pinfo->booted = parent.uptime;
+ pinfo->crashes = count_crashes(child.ppid);
+ }
+ }
+
+ return true;
+}
+
+static void
+get_process_stats(struct shash *stats)
+{
+ struct dirent *de;
+ DIR *dir;
+
+ dir = opendir(ovs_rundir);
+ if (!dir) {
+ VLOG_ERR_ONCE("%s: open failed (%s)", ovs_rundir, strerror(errno));
+ return;
+ }
+
+ while ((de = readdir(dir)) != NULL) {
+ struct process_info pinfo;
+ char *key, *value;
+ char *file_name;
+ char *extension;
+ pid_t pid;
+
+#ifdef _DIRENT_HAVE_D_TYPE
+ if (de->d_type != DT_UNKNOWN && de->d_type != DT_REG) {
+ continue;
+ }
+#endif
+
+ extension = strrchr(de->d_name, '.');
+ if (!extension || strcmp(extension, ".pid")) {
+ continue;
+ }
+
+ file_name = xasprintf("%s/%s", ovs_rundir, de->d_name);
+ pid = read_pidfile(file_name);
+ free(file_name);
+ if (pid < 0 || kill(pid, 0)) {
+ continue;
+ }
+
+ key = xasprintf("process_%.*s",
+ (int) (extension - de->d_name), de->d_name);
+ if (shash_find(stats, key)) {
+ free(key);
+ continue;
+ }
+
+ if (LINUX && get_process_info(pid, &pinfo)) {
+ value = xasprintf("%lu,%lu,%lld,%d,%lld,%lld",
+ pinfo.vsz, pinfo.rss, pinfo.cputime,
+ pinfo.crashes, pinfo.booted, pinfo.uptime);
+ } else {
+ value = xstrdup("");
+ }
+
+ shash_add_nocopy(stats, key, value);
+ }
+
+ closedir(dir);
+}
+
+static void
+get_filesys_stats(struct shash *stats OVS_UNUSED)
+{
+#if HAVE_SETMNTENT && HAVE_STATVFS
+ static const char file_name[] = "/etc/mtab";
+ struct mntent *me;
+ FILE *stream;
+ struct ds s;
+
+ stream = setmntent(file_name, "r");
+ if (!stream) {
+ VLOG_ERR_ONCE("%s: open failed (%s)", file_name, strerror(errno));
+ return;
+ }
+
+ ds_init(&s);
+ while ((me = getmntent(stream)) != NULL) {
+ unsigned long long int total, free;
+ struct statvfs vfs;
+ char *p;
+
+ /* Skip non-local and read-only filesystems. */
+ if (strncmp(me->mnt_fsname, "/dev", 4)
+ || !strstr(me->mnt_opts, "rw")) {
+ continue;
+ }
+
+ /* Given the mount point we can stat the file system. */
+ if (statvfs(me->mnt_dir, &vfs) && vfs.f_flag & ST_RDONLY) {
+ /* That's odd... */
+ continue;
+ }
+
+ /* Now format the data. */
+ if (s.length) {
+ ds_put_char(&s, ' ');
+ }
+ for (p = me->mnt_dir; *p != '\0'; p++) {
+ ds_put_char(&s, *p == ' ' || *p == ',' ? '_' : *p);
+ }
+ total = (unsigned long long int) vfs.f_frsize * vfs.f_blocks / 1024;
+ free = (unsigned long long int) vfs.f_frsize * vfs.f_bfree / 1024;
+ ds_put_format(&s, ",%llu,%llu", total, total - free);
+ }
+ endmntent(stream);
+
+ if (s.length) {
+ shash_add(stats, "file_systems", ds_steal_cstr(&s));
+ }
+ ds_destroy(&s);
+#endif /* HAVE_SETMNTENT && HAVE_STATVFS */
+}
+
+void
+get_system_stats(struct shash *stats)
+{
+ get_cpu_cores(stats);
+ get_load_average(stats);
+ get_memory_stats(stats);
+ get_process_stats(stats);
+ get_filesys_stats(stats);
+}
+<?xml version="1.0" encoding="utf-8"?>
<database title="Open vSwitch Configuration Database">
<p>A database with this schema holds the configuration for one Open
vSwitch daemon. The root of the configuration for the daemon is
<column name="statistics">
<p>
- Key-value pairs that report statistics about a running Open_vSwitch
- daemon. The current implementation updates these counters
- periodically. In the future, we plan to, instead, update them only
- when they are queried (e.g. using an OVSDB <code>select</code>
- operation) and perhaps at other times, but not on any regular
- periodic basis.</p>
- <p>
- The currently defined key-value pairs are listed below. Some Open
- vSwitch implementations may not support some statistics, in which
- case those key-value pairs are omitted.</p>
+ Key-value pairs that report statistics about a system running an Open
+ vSwitch. These are updated periodically (currently, every 5
+ seconds). Key-value pairs that cannot be determined or that do not
+ apply to a platform are omitted.
+ </p>
+
<dl>
- <dt><code>load-average</code></dt>
+ <dt><code>cpu</code></dt>
+ <dd>
+ <p>
+ Number of CPU processors, threads, or cores currently online and
+ available to the operating system on which Open vSwitch is
+ running, as an integer. This may be less than the number
+ installed, if some are not online or if they are not available to
+ the operating system.
+ </p>
+ <p>
+ Open vSwitch userspace processes are not multithreaded, but the
+ Linux kernel-based datapath is.
+ </p>
+ </dd>
+
+ <dt><code>load_average</code></dt>
+ <dd>
+ <p>
+ A comma-separated list of three floating-point numbers,
+ representing the system load average over the last 1, 5, and 15
+ minutes, respectively.
+ </p>
+ </dd>
+
+ <dt><code>memory</code></dt>
+ <dd>
+ <p>
+ A comma-separated list of integers, each of which represents a
+ quantity of memory in kilobytes that describes the operating
+ system on which Open vSwitch is running. In respective order,
+ these values are:
+ </p>
+
+ <ol>
+ <li>Total amount of RAM allocated to the OS.</li>
+ <li>RAM allocated to the OS that is in use.</li>
+ <li>RAM that can be flushed out to disk or otherwise discarded
+ if that space is needed for another purpose. This number is
+ necessarily less than or equal to the previous value.</li>
+ <li>Total disk space allocated for swap.</li>
+ <li>Swap space currently in use.</li>
+ </ol>
+
+ <p>
+ On Linux, all five values can be determined and are included. On
+ other operating systems, only the first two values can be
+ determined, so the list will only have two values.
+ </p>
+ </dd>
+
+ <dt><code>process_</code><var>name</var></dt>
<dd>
- System load average multiplied by 100 and rounded to the nearest
- integer.</dd>
+ <p>
+ One such key-value pair will exist for each running Open vSwitch
+ daemon process, with <var>name</var> replaced by the daemon's
+ name (e.g. <code>process_ovs-vswitchd</code>). The value is a
+ comma-separated list of integers. The integers represent the
+ following, with memory measured in kilobytes and durations in
+ milliseconds:
+ </p>
+
+ <ol>
+ <li>The process's virtual memory size.</li>
+ <li>The process's resident set size.</li>
+ <li>The amount of user and system CPU time consumed by the
+ process.</li>
+ <li>The number of times that the process has crashed and been
+ automatically restarted by the monitor.</li>
+ <li>The duration since the process was started.</li>
+ <li>The duration for which the process has been running.</li>
+ </ol>
+
+ <p>
+ The interpretation of some of these values depends on whether the
+ process was started with the <option>--monitor</option>. If it
+ was not, then the crash count will always be 0 and the two
+ durations will always be the same. If <option>--monitor</option>
+ was given, then the crash count may be positive; if it is, the
+ latter duration is the amount of time since the most recent crash
+ and restart.
+ </p>
+
+ <p>
+ There will be one key-value pair for each file in Open vSwitch's
+ ``run directory'' (usually <code>/var/run/openvswitch</code>)
+ whose name ends in <code>.pid</code>, whose contents are a
+ process ID, and which is locked by a running process. The
+ <var>name</var> is taken from the pidfile's name.
+ </p>
+
+ <p>
+ Currently Open vSwitch is only able to obtain all of the above
+ detail on Linux systems. On other systems, the same key-value
+ pairs will be present but the values will always be the empty
+ string.
+ </p>
+ </dd>
+
+ <dt><code>file_systems</code></dt>
+ <dd>
+ <p>
+ A space-separated list of information on local, writable file
+ systems. Each item in the list describes one file system and
+ consists in turn of a comma-separated list of the following:
+ </p>
+
+ <ol>
+ <li>Mount point, e.g. <code>/</code> or <code>/var/log</code>.
+ Any spaces or commas in the mount point are replaced by
+ underscores.</li>
+ <li>Total size, in kilobytes, as an integer.</li>
+ <li>Amount of storage in use, in kilobytes, as an integer.</li>
+ </ol>
+
+ <p>
+ This key-value pair is omitted if there are no local, writable
+ file systems or if Open vSwitch cannot obtain the needed
+ information.
+ </p>
+ </dd>
</dl>
</column>
</group>
git://git.onelab.eu / sliver-openvswitch.git / commitdiff