2 # Thierry Parmentelat - INRIA Sophia Antipolis
10 # this extracts all specfiles and computes .mk from specfiles
11 # you need to specify PLDISTRO here if relevant - see below
13 # for more info on how to invoke this stuff
15 #################### (fedora) distributions
17 # (*) as of nov. 2007, myplc-devel is deprecated
18 # (*) instead, we create a fresh vserver that holds required tools (see e.g. planetlab-devel.lst)
19 # (*) the build uses the current fedora version as a target for the produced images
20 # (*) so you simply need to create a fedora 8 build image for building fedora-8 images
22 #################### (planetlab) distributions
24 # (*) see README-pldistros.txt
25 # (*) then you need to run
26 # make stage1=true PLDISTRO=onelab
29 # This build deals with 3 kinds of objects
31 # (*) packages are named upon the RPM name; they are mostly lowercase
32 # Add a package to ALL if you want it built as part of the default set.
33 # (*) modules are named after the subversion tree; as of this writing their names
34 # are mostly mixed case like MyPLC or VserverReference
35 # (*) rpms are named in the spec files. A package typically defines several rpms;
36 # rpms are used for defining DEPEND-DEVEL-RPMS. See also package.rpmnames
38 #################### packages
39 # basics: how to build a package - you need/may define the following variables
42 # a package needs one or several modules to build.
45 # the package's specfile; this is relative to the FIRST module in package-MODULES
46 # see 'codebase' below
50 # (*) package-SPECVARS
51 # space-separated list of spec variable definitions, where you can reference make variable that relate to
52 # packages defined BEFORE the current one (note: you should use = - as opposed to := - to define these)
53 # e.g. mydriver-SPECVARS = foo=$(kernel-rpm-release)
54 # would let you use the %release from the kernel's package when rpmbuild'ing mydriver - see automatic below
55 # (*) package-DEPEND-PACKAGES
56 # a set of *packages* that this package depends on
57 # (*) package-DEPEND-DEVEL-RPMS
58 # a set of *rpms* that the build will rpm-install before building <package>
59 # (*) package-DEPEND-FILES
60 # a set of files that the package depends on - and that make needs to know about
61 # if this contains RPMS/yumgroups.xml, then the toplevel RPMS's index
62 # is refreshed with createrepo prior to running rpmbuild
63 # (*) package-RPMFLAGS: Miscellaneous RPM flags
64 # (*) package-RPMBUILD: If not rpmbuild - mostly used for sudo'ing rpmbuild
65 # (*) package-BUILD-FROM-SRPM: set this to any non-empty value, if your package is able to produce
66 # a source rpms by running 'make srpm'
68 #################### modules
69 # Required information about the various modules (set this in e.g. planetlab-tags.mk)
72 # the complete path where this module lies;
73 # you can specify the trunk or a given tag with this variable
75 # OR if the module is managed under cvs (will be obsoleted)
80 #################### automatic variables
82 # the build defines some make variables that are extracted from spec files
84 # (*) $ make ulogd-pkginfo
85 # to see the list f variables attached to a given package
86 # (*) $ make kernel-devel-rpminfo
87 # to see the list f variables attached to a given rpm
91 # exported to spec files as plrelease
92 PLANETLAB_RELEASE = 4.2
97 HOSTARCH := $(shell uname -i)
98 DISTRO := $(shell ./getdistro.sh)
99 RELEASE := $(shell ./getrelease.sh)
100 DISTRONAME := $(shell ./getdistroname.sh)
101 RPM-INSTALL-DEVEL := rpm --force -Uvh
102 # cannot force rpm -e
103 RPM-UNINSTALL-DEVEL := rpm -e
105 #################### Makefile
111 PLDISTRO := planetlab
113 export CVS_RSH := ssh
115 ########## pldistro.mk holds PLDISTRO - it is generated at stage1 (see below)
120 #################### include onelab.mk
121 # describes the set of components
122 PLDISTROCONTENTS := $(PLDISTRO).mk
123 include $(PLDISTROCONTENTS)
125 #################### include <pldistro>-tags.mk
126 # describes where to fetch components, and the related tags if using cvs
127 PLDISTROTAGS := $(PLDISTRO)-tags.mk
128 include $(PLDISTROTAGS)
130 ########## stage1 and stage1iter
131 # extract specs and compute .mk files by running
133 # entering stage1, we compute all the spec files
134 # then we use stage1iter to compute the .mk iteratively,
135 # ensuring that the n-1 first makefiles are loaded when creating the n-th one
136 # when stage1iter is set, it is supposed to be an index (starting at 1) in $(ALL)
138 ALLMKS := $(foreach package, $(ALL), MAKE/$(package).mk)
140 ### stage1iter : need some arithmetic, see
141 # http://www.cmcrossroads.com/articles/ask-mr.-make/learning-gnu-make-functions-with-arithmetic.html
142 ifneq "$(stage1iter)" ""
143 # the first n packages
144 packages := $(wordlist 1,$(words $(stage1iter)),$(ALL))
146 package := $(word $(words $(packages)),$(packages))
147 # the n-1 first packages
148 stage1iter_1 := $(wordlist 2,$(words $(stage1iter)),$(stage1iter))
149 previous := $(wordlist 1,$(words $(stage1iter_1)),$(ALL))
150 previousmks := $(foreach package,$(previous),MAKE/$(package).mk)
151 include $(previousmks)
154 @echo "========== stage1iter : $(package)"
155 # @echo "stage1iter : included .mk files : $(previousmks)"
156 all: $($(package).specpath)
157 all: MAKE/$(package).mk
163 @echo "========== stage1"
166 # specs and makes are done sequentially by stage1iter
169 arg=""; for n in $(ALL) ; do arg="$$arg x"; $(MAKE) --no-print-directory stage1iter="$$arg"; done
172 ### once .mks are OK, you can run make normally
179 # mention $(ALL) here rather than rpms
180 # this is because the inter-package dependencies are expressed like
181 # util-vserver: util-python
187 ### yumgroups.xml : compute from all known .pkgs files
190 ./yumgroups.sh $(PLDISTRO) > $@
192 createrepo = createrepo --quiet -g yumgroups.xml RPMS/
194 repo: RPMS/yumgroups.xml
201 # * to make configuration easier, we always use the first module's
202 # definitions (CVSROOT,TAG, or SVNPATH) to extract the spec file
203 # * for the same reason, in case cvs is used, the first module name is added to
204 # $(package)-SPEC - otherwise the cvs modules have to define spec as
205 # <module>/<module>.spec while svn modules just define it as <module>.spec
207 define stage1_variables
208 $(1).spec = $(notdir $($(1)-SPEC))
209 $(1).specpath = SPECS/$(1).spec
210 $(1).module = $(firstword $($(1)-MODULES))
211 $(1)-SVNPATH = $(strip $($(1)-SVNPATH))
214 $(foreach package, $(ALL), $(eval $(call stage1_variables,$(package))))
217 # for each package, compute whether we need to set date (i.e. whether we use the trunk)
218 # the myplc package is forced to have a date, because it is more convenient
219 # (we cannot bump its number everytime something changes in the system)
220 # myplc-native does not need this trick
222 define package_hasdate
223 $(1).has-date = $(if $(subst myplc,,$(1)), \
224 $(if $($($(1).module)-SVNPATH),\
225 $(if $(findstring /trunk,$($($(1).module)-SVNPATH)),yes,),\
226 $(if $(findstring HEAD,$($($(1).module)-TAG)),yes,)), \
230 $(foreach package, $(ALL), $(eval $(call package_hasdate,$(package))))
232 ### the common header for generated specfiles
233 # useful when trying new specfiles manually
235 (echo -n "# Generated by planetlab build from $($(1)-SPEC) on " ; date) > $@
236 echo "%define distro $(DISTRO)" >> $@
237 echo "%define distrorelease $(RELEASE)" >> $@
238 echo "%define distroname $(DISTRONAME)" >> $@
239 echo "%define pldistro $(PLDISTRO)" >> $@
240 echo "%define plrelease $(PLANETLAB_RELEASE)" >> $@
242 ### extract spec file from scm
244 $($(1).specpath): header.spec
246 cat header.spec > $($(1).specpath)
247 $(if $($(1).has-date),echo "%define date $(shell date +%Y.%m.%d)" >> $($(1).specpath),)
248 $(if $($(1)-SPECVARS), \
249 $(foreach line,$($(1)-SPECVARS), \
250 echo "%define" $(word 1,$(subst =, ,$(line))) "$(word 2,$(subst =, ,$(line)))" >> $($(1).specpath) ;))
251 echo "# included from $($(1)-SPEC)" >> $($(1).specpath)
252 $(if $($($(1).module)-SVNPATH),\
253 svn cat $($($(1).module)-SVNPATH)/$($(1)-SPEC) >> $($(1).specpath) || rm $($(1).specpath),\
254 cvs -d $($($(1).module)-CVSROOT) checkout \
255 -r $($($(1).module)-TAG) \
256 -p $($(1).module)/$($(1)-SPEC) >> $($(1).specpath))
259 $(foreach package,$(ALL),$(eval $(call target_spec,$(package))))
262 # Base rpmbuild in the current directory
263 # issues on fedora 8 : see the following posts
264 # http://forums.fedoraforum.org/showthread.php?t=39625 - and more specifically post#6
265 # https://www.redhat.com/archives/fedora-devel-list/2007-November/msg00171.html
267 FAKEROOT=/longbuildroot
268 PWD=$(shell /bin/pwd)
269 ifeq "$(PWD)" "$(REALROOT)"
270 export HOME := $(FAKEROOT)
272 export HOME := $(PWD)
275 ifeq "$(shell pwd)" "/build"
276 rm -f $(FAKEROOT) ; ln -s $(REALROOT) $(FAKEROOT)
279 echo "%_topdir $(HOME)" >> $@
280 echo "%_tmppath $(HOME)/tmp" >> $@
281 ./getrpmmacros.sh >> $@
283 ### this utility allows to extract various info from a spec file
284 ### and to define them in makefiles
285 spec2make: spec2make.c
286 $(CC) -g -Wall $< -o $@ -lrpm -lrpmbuild
288 ### run spec2make on the spec file and include the result
289 # usage: spec2make package
291 MAKE/$(1).mk: $($(1).specpath) spec2make .rpmmacros
293 ./spec2make $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk
294 @if [ -z MAKE/$(1).mk ] ; then rm MAKE/$(1).mk ; exit 1 ; fi
297 $(foreach package,$(ALL),$(eval $(call target_mk,$(package))))
299 # stores PLDISTRO in a file
300 # this is done at stage1. later run wont get confused
302 echo "PLDISTRO:=$(PLDISTRO)" > $@
303 echo "PLDISTROTAGS:=$(PLDISTROTAGS)" >> $@
305 savepldistro: pldistro.mk
308 # always refresh this
311 #################### regular make
313 define stage2_variables
314 ### devel dependencies
315 $(1).rpmbuild = $(if $($(1)-RPMBUILD),$($(1)-RPMBUILD),$(RPMBUILD)) $($(1)-RPMFLAGS)
316 $(1).all-devel-rpm-paths := $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).rpm-path))
317 $(1).depend-devel-packages := $(sort $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).package)))
318 ALL-DEVEL-RPMS += $($(1)-DEPEND-DEVEL-RPMS)
321 $(foreach package,$(ALL),$(eval $(call stage2_variables,$(package))))
322 ALL-DEVEL-RPMS := $(sort $(ALL-DEVEL-RPMS))
325 ### pack sources into tarballs
326 ALLTARBALLS:= $(foreach package, $(ALL), $($(package).tarballs))
327 tarballs: $(ALLTARBALLS)
328 @echo $(words $(ALLTARBALLS)) source tarballs OK
331 SOURCES/%.tar.bz2: SOURCES/%
332 tar chpjf $@ -C SOURCES $*
334 SOURCES/%.tar.gz: SOURCES/%
335 tar chpzf $@ -C SOURCES $*
337 SOURCES/%.tgz: SOURCES/%
338 tar chpzf $@ -C SOURCES $*
341 URLS/%: url=$(subst @colon@,:,$(subst @slash@,/,$(notdir $@)))
342 URLS/%: basename=$(notdir $(url))
344 echo curl $(url) -o SOURCES/$(basename)
347 ### the directory SOURCES/<package>-<version> is made
348 # with a copy -rl from CODEBASES/<package>
349 # the former is $(package.source) and the latter is $(package.codebase)
350 ALLSOURCES:=$(foreach package, $(ALL), $($(package).source))
351 # so that make does not use the rule below directly for creating the tarball files
352 .SECONDARY: $(ALLSOURCES)
354 sources: $(ALLSOURCES)
355 @echo $(words $(ALLSOURCES)) versioned source trees OK
358 define target_link_codebase_sources
359 $($(1).source): $($(1).codebase) ; mkdir -p SOURCES ; cp -rl $($(1).codebase) $($(1).source)
362 $(foreach package,$(ALL),$(eval $(call target_link_codebase_sources,$(package))))
364 ### codebase extraction
365 ALLCODEBASES:=$(foreach package, $(ALL), $($(package).codebase))
366 # so that make does not use the rule below directly for creating the tarball files
367 .SECONDARY: $(ALLCODEBASES)
369 codebases : $(ALLCODEBASES)
370 @echo $(words $(ALLCODEBASES)) codebase OK
374 # usage: extract_single_module package
375 define extract_single_module
377 $(if $($($(1).module)-SVNPATH), cd CODEBASES && svn export $($($(1).module)-SVNPATH) $(1), cd CODEBASES && cvs -d $($($(1).module)-CVSROOT) export -r $($($(1).module)-TAG) -d $(1) $($(1).module))
380 # usage: extract_multi_module package
381 define extract_multi_module
382 mkdir -p CODEBASES/$(1) && cd CODEBASES/$(1) && (\
383 $(foreach m,$($(1)-MODULES), $(if $($(m)-SVNPATH), svn export $($(m)-SVNPATH) $(m);, cvs -d $($(m)-CVSROOT) export -r $($(m)-TAG) $(m);)))
386 CODEBASES/%: package=$(notdir $@)
387 CODEBASES/%: multi_module=$(word 2,$($(package)-MODULES))
389 @(echo -n "XXXXXXXXXXXXXXX -- BEG CODEBASE $(package) : $@ " ; date)
390 $(if $(multi_module),\
391 $(call extract_multi_module,$(package)),\
392 $(call extract_single_module,$(package)))
393 @(echo -n "XXXXXXXXXXXXXXX -- END CODEBASE $(package) : $@ " ; date)
396 ALLSRPMS:=$(foreach package,$(ALL),$($(package).srpm))
398 @echo $(words $(ALLSRPMS)) source rpms OK
401 # usage: target_source_rpm package
402 # select upon the package name, whether it contains srpm or not
403 define target_source_rpm
404 ifeq "$($(1)-BUILD-FROM-SRPM)" ""
405 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).tarballs)
406 mkdir -p BUILD SRPMS tmp
407 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using SOURCES) " ; date)
408 $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
409 $($(1).rpmbuild) -bs $($(1).specpath)
410 $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
411 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
413 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).codebase)
414 mkdir -p BUILD SRPMS tmp
415 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using make srpm) " ; date)
416 $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
417 make -C $($(1).codebase) srpm SPECFILE=$(HOME)/$($(1).specpath) && \
418 rm -f SRPMS/$(notdir $($(1).srpm)) && \
419 ln $($(1).codebase)/$(notdir $($(1).srpm)) SRPMS/$(notdir $($(1).srpm))
420 $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
421 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
425 $(foreach package,$(ALL),$(eval $(call target_source_rpm,$(package))))
427 ### binary rpms are made from source rpm
428 ALLRPMS:=$(foreach package,$(ALL),$($(package).rpms))
429 # same as above, mention $(ALL) and not $(ALLRPMS)
431 @echo $(words $(ALLRPMS)) binary rpms OK
434 # use tmp dirs when building binary rpm so make remains idempotent
435 # otherwise SOURCES/ or SPEC gets touched again - which leads to rebuilding
436 RPM-USE-TMP-DIRS = --define "_sourcedir $(HOME)/tmp" --define "_specdir $(HOME)/tmp"
437 RPM-USE-COMPILE-DIRS = --define "_sourcedir $(HOME)/COMPILE" --define "_specdir $(HOME)/COMPILE"
439 # usage: build_binary_rpm package
440 # xxx hacky - invoke createrepo if DEPEND-FILES mentions RPMS/yumgroups.xml
441 define target_binary_rpm
442 $($(1).rpms): $($(1).srpm)
444 @(echo -n "XXXXXXXXXXXXXXX -- BEG RPM $(1) " ; date)
445 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
446 $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
447 $($(1).rpmbuild) --rebuild $(RPM-USE-TMP-DIRS) $($(1).srpm)
448 $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
449 @(echo -n "XXXXXXXXXXXXXXX -- END RPM $(1) " ; date)
450 # for manual use only - in case we need to investigate the results of an rpmbuild
451 $(1)-compile: $($(1).srpm)
453 @(echo -n "XXXXXXXXXXXXXXX -- BEG compile $(1) " ; date)
454 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
455 $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
456 $($(1).rpmbuild) --recompile $(RPM-USE-TMP-DIRS) $($(1).srpm)
457 $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
458 @(echo -n "XXXXXXXXXXXXXXX -- END compile $(1) " ; date)
462 $(foreach package,$(ALL),$(eval $(call target_binary_rpm,$(package))))
464 # e.g. make proper -> does propers rpms
465 # usage shorthand_target package
466 define target_shorthand
469 $(1)-spec: $($(1)-SPEC)
473 $(1)-tarball: $($(1).tarballs)
475 $(1)-codebase: $($(1).codebase)
477 $(1)-source: $($(1).source)
478 .PHONY: $(1)-codebase
479 $(1)-rpms: $($(1).rpms)
481 $(1)-srpm: $($(1).srpm)
485 $(foreach package,$(ALL),$(eval $(call target_shorthand,$(package))))
487 ### file dependencies
488 define package_depends_on_file
493 define target_dependfiles
494 $(foreach file,$($(1)-DEPEND-FILES),$(eval $(call package_depends_on_file,$(1),$(file))))
497 $(foreach package,$(ALL),$(eval $(call target_dependfiles,$(package))))
499 ### package dependencies
500 define package_depends_on_package
503 $($(1).srpm):$($(2).rpms)
506 define target_depends
507 $(foreach package,$($(1)-DEPEND-PACKAGES) $($(1).depend-devel-packages),$(eval $(call package_depends_on_package,$(1),$(package))))
510 $(foreach package,$(ALL),$(eval $(call target_depends,$(package))))
513 # usage: target_clean package
516 rm -rf $($(1).codebase)
517 .PHONY: $(1)-clean-codebase
518 CLEANS += $(1)-clean-codebase
520 rm -rf $($(1).source)
521 .PHONY: $(1)-clean-source
522 CLEANS += $(1)-clean-source
524 rm -rf $($(1).tarballs)
525 .PHONY: $(1)-clean-tarball
526 CLEANS += $(1)-clean-tarball
528 rm -rf BUILD/$(notdir $($(1).source))
529 CLEANS += $(1)-clean-build
532 .PHONY: $(1)-clean-rpms
533 CLEANS += $(1)-clean-rpms
536 .PHONY: $(1)-clean-srpm
537 CLEANS += $(1)-clean-srpm
538 $(1)-codeclean: $(1)-clean-source $(1)-clean-tarball $(1)-clean-build $(1)-clean-rpms $(1)-clean-srpm
539 $(1)-clean: $(1)-clean-codebase $(1)-codeclean
540 .PHONY: $(1)-codeclean $(1)-clean
542 rm -rf $($(1).specpath)
543 .PHONY: $(1)-clean-spec
546 .PHONY: $(1)-clean-make
547 $(1)-distclean: $(1)-distclean1 $(1)-distclean2
548 $(1)-distclean1: $(1)-clean-spec $(1)-clean-make
549 $(1)-distclean2: $(1)-clean
550 .PHONY: $(1)-distclean $(1)-distclean1 $(1)-distclean2
553 $(foreach package,$(ALL),$(eval $(call target_clean,$(package))))
561 @echo Available clean targets
564 ### brute force clean
566 rm -rf pldistro.mk .rpmmacros spec2make SPECS MAKE
568 rm -rf CODEBASES SOURCES BUILD RPMS SRPMS tmp
569 distclean: distclean1 distclean2
570 .PHONY: distclean1 distclean2 distclean
573 $(RPM-UNINSTALL-DEVEL) $(ALL-DEVEL-RPMS)
576 # gather build information for the 'About' page
577 # when run from crontab, INIT_CWD not properly set (says /root ..)
578 # so, the nightly build passes NIGHTLY_BASE here
579 # also store the nightly_base in .base for any post-processing purposes
581 @echo 'Creating myplc-release'
583 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx build info" >> $@
584 $(MAKE) --no-print-directory version-build >> $@
585 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx svn info" >> $@
586 $(MAKE) --no-print-directory version-svns >> $@
587 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx rpm info" >> $@
588 $(MAKE) --no-print-directory version-rpms >> $@
589 @echo $(NIGHTLY_BASE) > .base
592 @echo -n 'Build build-date: ' ; date '+%Y.%m.%d'
593 @echo -n 'Build build-time: ' ; date '+%H:%M-%Z'
594 @echo -n 'Build build-hostname: ' ; hostname
595 @echo "Build build-base: $(NIGHTLY_BASE)"
596 @echo "Build planetlab-distro: $(PLDISTRO)"
597 @echo "Build planetlab-tags: $(PLDISTROTAGS)"
598 @echo -n 'Build planetlab-tagsid: ' ; fgrep '$$''Id' $(PLDISTROTAGS)
599 @echo "Build target-arch: $(HOSTARCH)"
600 @echo "Build target-distro: $(DISTRO)"
601 @echo "Build target-distroname: $(DISTRONAME)"
602 @echo "Build target-release: $(RELEASE)"
603 @echo "Build target-personality: $(NIGHTLY_PERSONALITY)"
607 VFORMAT="%30s := %s\n"
608 define svn_version_target
610 @$(if $($(1)-SVNPATH),\
611 printf $(VFORMAT) $(1)-SVNPATH "$($(1)-SVNPATH)",\
612 printf $(VFORMAT) $(1)-CVSROOT "$($(1)-CVSROOT)" ; printf $(VFORMAT) $(1)-TAG "$($(1)-TAG)")
615 # compute all modules
617 $(foreach package,$(ALL), $(eval ALL-MODULES+=$($(package)-MODULES)))
618 ALL-MODULES:=$(sort $(ALL-MODULES))
620 $(foreach module,$(ALL-MODULES), $(eval $(call svn_version_target,$(module))))
622 version-svns: $(foreach module, $(ALL-MODULES), $(module)-version-svn)
624 RFORMAT="%20s :: version=%s release=%s\n"
625 define rpm_version_target
627 @printf $(RFORMAT) $($(1).rpm-name) $($(1).rpm-version) $($(1).rpm-release)
628 version-rpms: $(1)-version-rpm
631 $(foreach package,$(sort $(ALL)), $(eval $(call rpm_version_target,$(package))))
633 versions: myplc-release version-build version-svns version-rpms
634 .PHONY: versions version-build version-rpms version-svns
636 #################### include install Makefile
637 # the default is to use the distro-dependent install file
638 # however the main distro file can redefine PLDISTROINSTALL
639 ifndef PLDISTROINSTALL
640 PLDISTROINSTALL := $(PLDISTRO)-install.mk
643 -include $(PLDISTROINSTALL)
647 @echo "********** Run make in two stages:"
649 @echo "make stage1=true PLDISTRO=onelab"
650 @echo " -> extracts all spec files in SPECS/ and mk files in MAKE/"
651 @echo " as well as save PLDISTRO for subsequent runs"
653 @echo "********** Then you can use the following targets"
655 @echo " rebuilds everything"
656 @echo 'make util-vserver'
657 @echo " makes the RPMS related to util-vserver"
658 @echo " equivalent to 'make util-vserver-rpms'"
660 @echo "********** Or, vertically - step-by-step for a given package"
661 @echo 'make util-vserver-codebase'
662 @echo " performs codebase extraction in CODEBASES/util-vserver"
663 @echo 'make util-vserver-source'
664 @echo " creates source link in SOURCES/util-vserver-<version>"
665 @echo 'make util-vserver-tarball'
666 @echo " creates source tarball in SOURCES/util-vserver-<version>.<tarextension>"
667 @echo 'make util-vserver-srpm'
668 @echo " build source rpm in SRPMS/"
669 @echo 'make util-vserver-rpms'
670 @echo " build rpm(s) in RPMS/"
672 @echo "********** Or, horizontally, reach a step for all known packages"
673 @echo 'make codebases'
675 @echo 'make tarballs'
679 @echo "********** Manual targets"
680 @echo "make package-compile"
681 @echo " The regular process uses rpmbuild --rebuild, that performs"
682 @echo " a compilation directory cleanup upon completion. If you need to investigate"
683 @echo " the intermediate compilation directory, use the -compile targets"
684 @echo "********** Cleaning examples"
686 @echo " removes the files made by make"
687 @echo "make distclean"
688 @echo " brute-force cleaning, removes entire directories - requires a new stage1"
689 @echo "make develclean"
690 @echo " rpm-uninstalls all devel packages installed during build"
692 @echo "make iptables-distclean"
693 @echo " deep clean for a given package"
694 @echo "make iptables-codeclean"
695 @echo " run this if you've made a change in the CODEBASES area for iptables"
697 @echo "make util-vserver-clean"
698 @echo " removes codebase, source, tarball, build, rpm and srpm for util-vserver"
699 @echo "make util-vserver-clean-codebase"
700 @echo " and so on for source, tarball, build, rpm and srpm"
702 @echo "********** Info examples"
704 @echo " Displays the value of a given variable (here ALL)"
705 @echo " with only a single plus sign only the value is displayed"
706 @echo "make ulogd-pkginfo"
707 @echo " Displays know attributes of a package"
708 @echo "make kernel-devel-rpminfo"
709 @echo " Displays know attributes of an rpm"
711 @echo "********** Known pakages are"
714 #################### convenience, for debugging only
715 # make +foo : prints the value of $(foo)
716 # make ++foo : idem but verbose, i.e. foo=$(foo)
717 ++%: varname=$(subst +,,$@)
719 @echo "$(varname)=$($(varname))"
720 +%: varname=$(subst +,,$@)
722 @echo "$($(varname))"
724 PKGKEYS := tarballs source codebase srpm rpms rpmnames rpm-release rpm-name rpm-version rpm-subversion
725 %-pkginfo: package=$(subst -pkginfo,,$@)
727 @$(foreach key,$(PKGKEYS),echo "$(package).$(key)=$($(package).$(key))";)
729 RPMKEYS := rpm-path package
730 %-rpminfo: rpm=$(subst -rpminfo,,$@)
732 @$(foreach key,$(RPMKEYS),echo "$(rpm).$(key)=$($(rpm).$(key))";)