2 # Thierry Parmentelat - INRIA Sophia Antipolis
8 # this extracts all specfiles and computes .mk from specfiles
9 # you need to specify PLDISTRO here if relevant - see below
11 # for more info on how to invoke this stuff
13 #################### (fedora) distributions
15 # (*) as of nov. 2007, myplc-devel is deprecated
16 # (*) instead, we create a fresh vserver that holds required tools (see e.g. planetlab-devel.lst)
17 # (*) the build uses the current fedora version as a target for the produced images
18 # (*) so you simply need to create a fedora 8 build image for building fedora-8 images
20 #################### (planetlab) distributions
22 # (*) see README-pldistros.txt
23 # (*) then you need to run
24 # make stage1=true PLDISTRO=onelab
27 # This build deals with 3 kinds of objects
29 # (*) packages are named upon the RPM name; they are mostly lowercase
30 # Add a package to ALL if you want it built as part of the default set.
31 # (*) modules are named after the subversion or git tree; we would wish to keep
32 # these names lowercase as far as possible
33 # (*) rpms are named in the spec files. A package typically defines several rpms;
34 # rpms are used for defining LOCAL-DEVEL-RPMS. See also package.rpmnames
36 # in simple cases, one package uses one module (in which case using the same name sounds right)
37 # but others might need several modules (e.g. image-creation packages like bootstrapfs need
38 # bootstrapfs and build); in this case the FIRST ONE is used for locating the specfile
40 #################### packages
41 # basics: how to build a package - you need to define the following variables
44 # a package needs one or several modules to build; the first one is used for
45 # some special purposes, like locating the specfile
47 # the package's specfile; this is relative to the FIRST module in package-MODULES
51 # (*) package-DEPEND-PACKAGES
52 # a set of (obviously local) *packages* that this package depends on, e.g.
53 # bootstrapfs-DEPEND-PACKAGES += kernel
54 # this impacts the order of the build
55 # (*) package-STOCK-DEVEL-RPMS
56 # a set of stock rpms that this package needs at build-time
57 # this can also be set in config.<distro>/devel.pkgs or config.planetlab/devel.pkgs as appropriate
58 # (*) package-LOCAL-DEVEL-RPMS
59 # a set of *local* rpms that the build will rpm-install before building <package>
60 # the build will attempt to uninstall those once the package is built, this is not fatal though
61 # this is intended to denote local rpms, i.e. ones that are results of our own build
62 # stock rpms should be mentioned in STOCK-DEVEL-RPMS or in devel.pkgs as described above
63 # (*) package-LOCAL-DEVEL-RPMS-CRUCIAL
64 # like package-LOCAL-DEVEL-RPMS but for crucial packages (like autoconf) that only need an update from our build
65 # rpms in this area will *not* be uninstalled after the target is made, because that would ruin the build vm for good
66 # (*) package-DEPEND-FILES
67 # a set of files that the package depends on - and that make needs to know about
68 # if this contains RPMS/yumgroups.xml, then the toplevel RPMS's index
69 # is refreshed with createrepo prior to running rpmbuild
70 # (*) package-SPECVARS
71 # space-separated list of spec variable definitions, where you can reference make variables that
72 # belong to packages defined BEFORE the current one
73 # note: you should use = to define these (as opposed to :=)
74 # e.g. mydriver-SPECVARS = foo=$(kernel-rpm-release)
75 # would let you use the %release from the kernel's package when rpmbuild'ing mydriver
77 # (*) package-RPMFLAGS: Miscellaneous RPM flags
78 # this is passed to rpmbuild, as well as to spec2make for "exporting" various rpm variable
79 # to make; beware that some features, like --with=debug or --define 'foo bar' are not
80 # well handled by spec2make as of this writing, which can cause issues.
81 # hopefully this will be fixed...
82 # (*) package-BUILD-FROM-SRPM: set this to any non-empty value,
83 # if your package is able to produce a source rpm.
84 # In this case the build will first invoke 'make srpm', and then rebuild binaries from that
85 # (*) package-RPMDATE: set this to any non-empty value to get the rpm package's release field hold the current date
86 # this is useful for container packages, like e.g. bootstrapfs or vserver, that contains much more than the
89 #################### modules
90 # Required information about the various modules (set this in e.g. planetlab-tags.mk)
94 # the complete path where this module lies;
95 # you can specify the trunk or a given tag with this variable
99 # which by analogy with svn revision scheme, is expected to be <url>@<tag>
101 #################### automatic variables
103 # the build defines some make variables that are extracted from spec files
104 # to inspect those, see for example
105 # (*) $ make ulogd-pkginfo
106 # to see the list f variables attached to a given package
107 # (*) $ make kernel-devel-rpminfo
108 # to see the list of variables attached to a given rpm
112 # exported to spec files as plrelease
113 PLANETLAB_RELEASE = 5.2
118 # minimal compat with macos, just so this does not complain
119 HOSTARCH := $(shell uname -i 2> /dev/null || uname -m 2> /dev/null)
120 DISTRO := $(shell ./getdistro.sh)
121 RELEASE := $(shell ./getrelease.sh)
122 DISTRONAME := $(shell ./getdistroname.sh)
124 #################### Makefile
130 PLDISTRO := planetlab
133 ########## envfrompreviousrun.mk holds PLDISTRO and others - it is generated at stage1 (see below)
135 include envfrompreviousrun.mk
138 # when re-running the nightly build after failure, we need to gather the former values
139 # do this by running make stage1=skip +PLDISTRO
140 ifeq "$(stage1)" "skip"
141 include envfrompreviousrun.mk
144 #################### include onelab.mk
145 # describes the set of components
146 PLDISTROCONTENTS := $(PLDISTRO).mk
147 include $(PLDISTROCONTENTS)
149 #################### include <pldistro>-tags.mk
150 # describes where to fetch components
151 ifeq "$(PLDISTROTAGS)" ""
152 PLDISTROTAGS := $(PLDISTRO)-tags.mk
154 include $(PLDISTROTAGS)
156 # this used to be set in the -tags.mk files, but that turned out to require
157 # error-prone duplicate changes
158 # so now the nightly build script sets this to what it is currently using
159 # in case we run this manually, i.e. if build-GITPATH is not set
160 ifeq "$(build-GITPATH)" ""
161 build-GITPATH := $(shell git config remote.origin.url)
164 #################### pldistros that are defined remotely
166 define remote_pldistro_fetch_svn
167 $(1).config.SVNPATH := $(shell grep -v "^#" config.$(1).svnpath)
168 config.$(1): config.$(1).svnpath
169 @echo "Fetching (svn) details for remote pldistro $(1)"
170 svn export $$($(1).config.SVNPATH) config.$(1)
174 define remote_pldistro_fetch_git
175 $(1).config.GITPATH := $(shell grep -v "^#" config.$(1).gitpath)
176 $(1).config.gitrepo := $$(firstword $$(subst @, ,$$($(1).config.GITPATH)))
177 $(1).config.gittag := $$(word 2,$$(subst @, ,$$($(1).config.GITPATH)))
178 $(1).config.gittag := $$(if $$($(1).config.gittag),$$($(1).config.gittag),master)
179 config.$(1): GITPATH=$(shell grep -v "^#" config.$(1).gitpath)
180 config.$(1): config.$(1).gitpath
181 @echo "Fetching (git) details for remote pldistro $(1)"
183 git $(GITTAG) archive --remote=$$($(1).config.gitrepo) $$($(1).config.gittag) | tar -C config.$(1) -xf -
188 define remote_pldistro
189 $(1).mk: config.$(1)/$(1).mk
190 @echo 'creating $(1) from config.$(1)'
191 cp config.$(1)/$(1).mk $(1).mk
193 $(2).mk: config.$(1)/$(2).mk
194 @echo 'creating $(2) tags from config.$(1)'
195 cp config.$(1)/$(2).mk $(2).mk
197 config.$(1)/$(1).mk: config.$(1)
198 config.$(1)/$(2).mk: config.$(1)
200 DISTCLEANS += $(1).mk $(2).mk config.$(1)
201 $(eval $(call remote_pldistro_fetch_$(3),$(1)))
204 $(eval $(call remote_pldistro,wextoolbox,wextoolbox-tags,git))
205 $(eval $(call remote_pldistro,wexlxc,wexlxc-tags,git))
207 ########## stage1 and stage1iter
208 # extract specs and compute .mk files by running
210 # entering stage1, we compute all the spec files
211 # then we use stage1iter to compute the .mk iteratively,
212 # ensuring that the n-1 first makefiles are loaded when creating the n-th one
213 # when stage1iter is set, it is supposed to be an index (starting at 1) in $(ALL)
215 ALLMKS := $(foreach package, $(ALL), MAKE/$(package).mk)
217 ### stage1iter : need some arithmetic, see
218 # http://www.cmcrossroads.com/articles/ask-mr.-make/learning-gnu-make-functions-with-arithmetic.html
219 ifneq "$(stage1iter)" ""
220 # the first n packages
221 packages := $(wordlist 1,$(words $(stage1iter)),$(ALL))
223 package := $(word $(words $(packages)),$(packages))
224 # the n-1 first packages
225 stage1iter_1 := $(wordlist 2,$(words $(stage1iter)),$(stage1iter))
226 previous := $(wordlist 1,$(words $(stage1iter_1)),$(ALL))
227 previousmks := $(foreach package,$(previous),MAKE/$(package).mk)
228 include $(previousmks)
231 @echo "========== stage1iter : $(package)"
232 # @echo "stage1iter : included .mk files : $(previousmks)"
233 all: $($(package).specpath)
234 all: MAKE/$(package).mk
240 @echo "========== stage1"
243 # specs and makes are done sequentially by stage1iter
246 arg=""; for n in $(ALL) ; do arg="$$arg x"; $(MAKE) --no-print-directory stage1iter="$$arg"; done
249 ### once .mks are OK, you can run make normally
256 # mention $(ALL) here rather than rpms
257 # this is because the inter-package dependencies are expressed like
258 # util-vserver: util-python
264 ### yumgroups.xml : compute from all known .pkgs files
267 ./yumgroups.sh $(PLDISTRO) > $@
269 createrepo = createrepo --quiet -g yumgroups.xml RPMS/
271 repo: RPMS/yumgroups.xml
278 # * we always use the first module's location (SVNPATH/GITPATH) to extract the spec file
279 # * no matter what SCM is used, SPEC should hold a relative path from the module's root
281 define stage1_package_vars
282 $(1).module := $(firstword $($(1)-MODULES))
283 $(1).specpath := SPECS/$(notdir $($(1)-SPEC))
284 $(1).moduledir := MODULES/$$($(1).module)
285 $(1).codespec := MODULES/$$($(1).module)/$($(1)-SPEC)
286 $(1).spec2makeflags := $(if $($(1)-WHITELIST-RPMS),--whitelist-rpms $($(1)-WHITELIST-RPMS),)
289 $(foreach package, $(ALL), $(eval $(call stage1_package_vars,$(package))))
291 # compute all modules
292 ALL.modules := build tests
293 $(foreach package,$(ALL), $(eval ALL.modules+=$($(package)-MODULES)))
294 ALL.modules:=$(sort $(ALL.modules))
296 # extract revision from -SVNPATH or tag from -GITPATH
297 define stage1_module_vars
298 ifneq "$($(1)-SVNPATH)" ""
299 $(1)-SVNPATH := $(strip $($(1)-SVNPATH))
300 $(1)-SCMPATH := $(strip $($(1)-SVNPATH))
302 $(1)-GITPATH := $$(strip $$($(1)-GITPATH))
303 $(1)-SCMPATH := $$(strip $$($(1)-GITPATH))
304 $(1).gitrepo := $$(firstword $$(subst @, ,$$($(1)-GITPATH)))
305 $(1).gittag := $$(word 2,$$(subst @, ,$$($(1)-GITPATH)))
306 $(1).gittag := $$(if $$($(1).gittag),$$($(1).gittag),master)
310 $(foreach module,$(ALL.modules), $(eval $(call stage1_module_vars,$(module))))
313 # for each package, compute whether we need to set date
314 # the heuristic is that we mention the date as part of the rpm release flag if
315 # (*) the package has requested it by setting package-RPMDATE (container packages should do that)
316 # (*) or SVNPATH contains 'trunk' or 'branches'
317 # (*) or GITPATH has no '@' (trunk)
318 # (*) or GITPATH contains a '@', and the gittag part has no '-' (this is to tell a tag from a branch..)
320 define package_hasdate
321 $(1).has-date = $(if $($(1)-RPMDATE),yes, \
322 $(if $($($(1).module)-SVNPATH), \
323 $(if $(findstring /trunk,$($($(1).module)-SVNPATH)),yes, \
324 $(if $(findstring /branches,$($($(1).module)-SVNPATH)),yes,)), \
325 $(if $(not $($($(1).module).gittag)), yes,\
326 $(if $(findstring -,$($($(1).module).gittag)),,yes))))
329 $(foreach package, $(ALL), $(eval $(call package_hasdate,$(package))))
331 ### the common header for generated specfiles
332 # useful when trying new specfiles manually
334 (echo -n "# Generated by planetlab build on " ; date) > $@
335 echo "%define distro $(DISTRO)" >> $@
336 echo "%define distrorelease $(RELEASE)" >> $@
337 echo "%define distroname $(DISTRONAME)" >> $@
338 echo "%define pldistro $(PLDISTRO)" >> $@
339 echo "%define plrelease $(PLANETLAB_RELEASE)" >> $@
340 echo "# use MD5 and gzip for binary and source files" >> $@
341 echo "%global _binary_filedigest_algorithm 1" >> $@
342 echo "%global _source_filedigest_algorithm 1" >> $@
343 echo "%global _source_payload w9.gzdio" >> $@
344 echo "%global _binary_payload w9.gzdio" >> $@
346 ### make up spec file - extract module first
348 $($(1).specpath): header.spec $($(1).codespec)
350 cat header.spec > $($(1).specpath)
351 echo "%define SCMURL $($($(1).module)-SCMPATH)" >> $($(1).specpath)
352 $(if $($(1).has-date),echo "%define date $(shell date +%Y.%m.%d)" >> $($(1).specpath),)
353 $(if $($(1)-SPECVARS), \
354 $(foreach line,$($(1)-SPECVARS), \
355 echo "%define" $(word 1,$(subst =, ,$(line))) "$(word 2,$(subst =, ,$(line)))" >> $($(1).specpath) ;))
356 echo "# included from $($(1)-SPEC)" >> $($(1).specpath)
357 cat $($(1).codespec) >> $($(1).specpath)
359 $($(1).codespec): $($(1).moduledir)
363 $(foreach package,$(ALL),$(eval $(call target_spec,$(package))))
365 ### module extraction
366 define target_extract_module
368 @(echo -n "XXXXXXXXXXXXXXX -- BEG MODULE $(1) : $@ " ; date)
371 $(if $($(1)-SVNPATH),\
372 svn export $($(1)-SVNPATH) $(1),\
373 mkdir $(1) ; (git archive --remote=$($(1).gitrepo) $($(1).gittag) | tar -C $(1) -xf - ) \
374 || { rm -rf $(1); false; } )
375 @(echo -n "XXXXXXXXXXXXXXX -- END MODULE $(1) : $@ " ; date)
377 $(1)-module: MODULES/$(1)
381 $(foreach module,$(ALL.modules),$(eval $(call target_extract_module,$(module))))
393 # Base rpmbuild in the current directory
394 # issues on fedora 8 : see the following posts
395 # http://forums.fedoraforum.org/showthread.php?t=39625 - and more specifically post#6
396 # https://www.redhat.com/archives/fedora-devel-list/2007-November/msg00171.html
398 FAKEROOT=/longbuildroot
399 PWD=$(shell /bin/pwd)
400 ifeq "$(PWD)" "$(REALROOT)"
401 export HOME := $(FAKEROOT)
403 export HOME := $(PWD)
406 ifeq "$(shell pwd)" "/build"
407 rm -f $(FAKEROOT) ; ln -s $(REALROOT) $(FAKEROOT)
410 echo "%_topdir $(HOME)" >> $@
411 echo "%_tmppath $(HOME)/tmp" >> $@
412 echo "%__spec_install_pre %{___build_pre}" >> $@
413 ./getrpmmacros.sh >> $@
415 ### this utility allows to extract various info from a spec file
416 ### and to define them in makefiles
417 # use the C code where it works as it's the original one, use the python code otherwise
418 spec2make: spec2make.c
419 $(CC) -g -Wall $< -o $@ -lrpm -lrpmbuild -lrpmio -lpopt || ln -s spec2make.py $@
421 ### run spec2make on the spec file and include the result
422 # usage: spec2make package
423 # with old rpms (f8&c5) and too recent specfiles (the kernel), we need a patch to spec2make
424 # so when <package-NEEDSPECK2MAKEHACK is set, we run spec2make with the --hack flag
426 MAKE/$(1).mk: $($(1).specpath) spec2make .rpmmacros
428 ./spec2make $($(1).spec2makeflags) $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk || { rm MAKE/$(1).mk; exit 1; }
431 $(foreach package,$(ALL),$(eval $(call target_mk,$(package))))
433 # stores env variables in a file
434 # this is done at stage1. later run wont get confused
435 SAVED_VARS=PLDISTRO PLDISTROTAGS build-GITPATH PERSONALITY MAILTO BASE WEBPATH TESTBUILDURL WEBROOT
436 # also remember variable settings in alias, like sfa-GITPATH=git://git.f-lab.fr/sfa.git@generic
437 # but don't save stage1
438 ASSIGNS=$(foreach chunk,$(MAKEFLAGS),$(if $(findstring =,$(chunk)),$(if $(findstring stage1,$(chunk)),,$(chunk)),))
439 envfrompreviousrun.mk:
440 @echo "# do not edit" > $@
441 @$(foreach var,$(SAVED_VARS),echo "$(var):=$($(var))" >> $@ ;)
442 @$(foreach chunk,$(ASSIGNS),echo "override $(chunk)" | sed -e s,=,:=, >> $@;)
443 @echo "# do not edit" > aliases
444 @echo -n "alias m=\"make " >> aliases
445 @$(foreach var,$(SAVED_VARS),echo -n " $(var)=$($(var))" >> aliases ;)
446 @echo -n $(ASSIGNS) >> aliases
447 @echo "\"" >> aliases
448 @echo "alias m1=\"m stage1=true\"" >> aliases
450 envfrompreviousrun: envfrompreviousrun.mk
451 .PHONY: envfrompreviousrun
453 # always refresh this
454 all: envfrompreviousrun
456 #################### regular make
458 define stage2_variables
459 ### devel dependencies
460 $(1).rpmbuild = $(RPMBUILD) $($(1)-RPMFLAGS)
461 $(1).all-devel-rpm-paths := $(foreach rpm,$($(1)-LOCAL-DEVEL-RPMS) $($(1)-LOCAL-DEVEL-RPMS-CRUCIAL),$($(rpm).rpm-path))
462 $(1).depend-devel-packages := $(sort $(foreach rpm,$($(1)-LOCAL-DEVEL-RPMS),$($(rpm).package)))
463 ALL-STOCK-DEVEL-RPMS += $($(1)-LOCAL-DEVEL-RPMS)
466 $(foreach package,$(ALL),$(eval $(call stage2_variables,$(package))))
467 ALL-STOCK-DEVEL-RPMS := $(sort $(ALL-STOCK-DEVEL-RPMS))
470 ### pack sources into tarballs
471 ALLTARBALLS:= $(foreach package, $(ALL), $($(package).tarballs))
472 tarballs: $(ALLTARBALLS)
473 @echo $(words $(ALLTARBALLS)) source tarballs OK
476 SOURCES/%.tar.bz2: SOURCES/%
477 tar chpjf $@ -C SOURCES $*
479 SOURCES/%.tar.gz: SOURCES/%
480 tar chpzf $@ -C SOURCES $*
482 SOURCES/%.tgz: SOURCES/%
483 tar chpzf $@ -C SOURCES $*
486 URLS/%: url=$(subst @colon@,:,$(subst @slash@,/,$(notdir $@)))
487 URLS/%: basename=$(notdir $(url))
489 echo curl $(url) -o SOURCES/$(basename)
492 ### the directory SOURCES/<package>-<version> is made
493 # with a (set of) copy -rl from MODULES/<module>
494 # the former is $(package.source)
495 ALLSOURCES:=$(foreach package, $(ALL), $($(package).source))
496 # so that make does not use the rule below directly for creating the tarball files
497 .SECONDARY: $(ALLSOURCES)
499 sources: $(ALLSOURCES)
500 @echo $(words $(ALLSOURCES)) versioned source trees OK
503 # argument is a package
504 # do things differently if multiple modules are mentioned (sigh..)
505 define target_copy_link_modules_sources
506 $($(1).source): $(foreach module,$($(1)-MODULES),MODULES/$(module))
507 $(if $(word 2,$($(1)-MODULES)),\
508 mkdir -p $($(1).source) && $(foreach module,$($(1)-MODULES), cp -rl MODULES/$(module) $($(1).source)/$(module);) ,\
509 mkdir -p SOURCES && cp -rl MODULES/$($(1)-MODULES) $($(1).source))
512 $(foreach package,$(ALL),$(eval $(call target_copy_link_modules_sources,$(package))))
515 ALLMODULES:=$(foreach module, $(ALL.modules), MODULES/$(module))
516 .SECONDARY: $(ALLMODULES)
517 modules: $(ALLMODULES)
518 @echo $(words $(ALLMODULES)) modules OK "(fetched from scm)"
522 ALLSRPMS:=$(foreach package,$(ALL),$($(package).srpm))
524 @echo $(words $(ALLSRPMS)) source rpms OK
527 #################### manage build requirements
529 RPMYUM-INSTALL-LOCAL := rpm --force -Uvh
530 RPMYUM-INSTALL-STOCK := yum -y install
531 # uninstall -- cannot force rpm -e
532 # need to ignore result, kernel-headers cannot be uninstalled as glibc depends on it
533 RPMYUM-UNINSTALL-STOCK := rpm -e
535 ### these macro handles the LOCAL-DEVEL-RPMS and LOCAL-DEVEL-RPMS-CRUCIAL tags for a given package
536 # before building : rpm-install LOCAL-DEVEL-RPMS
537 define rpmyum_install_local_rpms
538 $(if $($(1).all-devel-rpm-paths), echo "Installing for $(1)-LOCAL-DEVEL-RPMS" ; $(RPMYUM-INSTALL-LOCAL) $($(1).all-devel-rpm-paths))
541 # install stock rpms if defined
542 define rpmyum_install_stock_rpms
543 $(if $($(1)-STOCK-DEVEL-RPMS), echo "Installing for $(1)-STOCK-DEVEL-RPMS" ; $(RPMYUM-INSTALL-STOCK) $($(1)-STOCK-DEVEL-RPMS))
546 define rpmyum_uninstall_stock_rpms
547 -$(if $($(1)-LOCAL-DEVEL-RPMS), echo "Unstalling for $(1)-LOCAL-DEVEL-RPMS" ; $(RPMYUM-UNINSTALL-STOCK) $($(1)-LOCAL-DEVEL-RPMS))
551 DPKGAPT-INSTALL-STOCK := apt-get -y install
552 DPKGAPT-UNINSTALL-STOCK := echo WARNING uninstalling stock debs not implemented
554 define dpkgapt_install_stock_debs
555 $(if $($(1)-STOCK-DEVEL-DEBS), echo "Installing for $(1)-STOCK-DEVEL-DEBS" ; $(DPKGAPT-INSTALL-STOCK) $($(1)-STOCK-DEVEL-DEBS))
558 define dpkgapt_uninstall_stock_debs
559 -$(if $($(1)-LOCAL-DEVEL-DEBS), echo "Unstalling for $(1)-LOCAL-DEVEL-DEBS" ; $(DPKGAPT-UNINSTALL-STOCK) $($(1)-LOCAL-DEVEL-DEBS))
564 # usage: target_source_rpm package
565 define target_source_rpm
566 ifeq "$($(1)-BUILD-FROM-SRPM)" ""
567 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).tarballs)
568 mkdir -p BUILD SRPMS tmp
569 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using SOURCES) " ; date)
570 $(call rpmyum_install_stock_rpms,$(1))
571 $(call rpmyum_install_local_rpms,$(1))
572 $($(1).rpmbuild) -bs $($(1).specpath)
573 $(call rpmyum_uninstall_stock_rpms,$(1))
574 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
576 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).source)
577 mkdir -p BUILD SRPMS tmp
578 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using make srpm) " ; date)
579 $(call rpmyum_install_stock_rpms,$(1))
580 $(call rpmyum_install_local_rpms,$(1))
581 make -C $($(1).source) srpm SPECFILE=$(HOME)/$($(1).specpath) EXPECTED_SRPM=$(notdir $($(1).srpm)) && \
582 rm -f SRPMS/$(notdir $($(1).srpm)) && \
583 ln $($(1).source)/$(notdir $($(1).srpm)) SRPMS/$(notdir $($(1).srpm))
584 $(call rpmyum_uninstall_stock_rpms,$(1))
585 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
589 $(foreach package,$(ALL),$(eval $(call target_source_rpm,$(package))))
591 ### binary rpms are made from source rpm
592 ALLRPMS:=$(foreach package,$(ALL),$($(package).rpms))
593 # same as above, mention $(ALL) and not $(ALLRPMS)
595 @echo $(words $(ALLRPMS)) binary rpms OK
598 # use tmp dirs when building binary rpm so make remains idempotent
599 # otherwise SOURCES/ or SPEC gets touched again - which leads to rebuilding
600 RPM-USE-TMP-DIRS = --define "_sourcedir $(HOME)/tmp" --define "_specdir $(HOME)/tmp"
601 RPM-USE-COMPILE-DIRS = --define "_sourcedir $(HOME)/COMPILE" --define "_specdir $(HOME)/COMPILE"
603 # usage: build_binary_rpm package
604 # xxx hacky - invoke createrepo if DEPEND-FILES mentions RPMS/yumgroups.xml
605 define target_binary_rpm
606 $($(1).rpms): $($(1).srpm)
608 @(echo -n "XXXXXXXXXXXXXXX -- BEG RPM $(1) " ; date)
609 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
610 $(call rpmyum_install_stock_rpms,$(1))
611 $(call rpmyum_install_local_rpms,$(1))
612 $($(1).rpmbuild) --rebuild $(RPM-USE-TMP-DIRS) $($(1).srpm)
613 $(call rpmyum_uninstall_stock_rpms,$(1))
614 @(echo -n "XXXXXXXXXXXXXXX -- END RPM $(1) " ; date)
615 # for manual use only - in case we need to investigate the results of an rpmbuild
616 $(1)-compile: $($(1).srpm)
618 @(echo -n "XXXXXXXXXXXXXXX -- BEG compile $(1) " ; date)
619 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
620 $(call rpmyum_install_stock_rpms,$(1))
621 $(call rpmyum_install_local_rpms,$(1))
622 $($(1).rpmbuild) --recompile $(RPM-USE-TMP-DIRS) $($(1).srpm)
623 $(call rpmyum_uninstall_stock_rpms,$(1))
624 @(echo -n "XXXXXXXXXXXXXXX -- END compile $(1) " ; date)
628 $(foreach package,$(ALL),$(eval $(call target_binary_rpm,$(package))))
630 # e.g. make proper -> does propers rpms
631 # usage shorthand_target package
632 define target_shorthand
635 $(1)-spec: $($(1)-SPEC)
639 $(1)-tarball: $($(1).tarballs)
642 $(1)-source: $($(1).source)
643 $(1)-rpms: $($(1).rpms)
645 $(1)-srpm: $($(1).srpm)
649 $(foreach package,$(ALL),$(eval $(call target_shorthand,$(package))))
651 ### file dependencies
652 define package_depends_on_file
657 define target_dependfiles
658 $(foreach file,$($(1)-DEPEND-FILES),$(eval $(call package_depends_on_file,$(1),$(file))))
661 $(foreach package,$(ALL),$(eval $(call target_dependfiles,$(package))))
663 ### package dependencies
664 define package_depends_on_package
667 $($(1).srpm):$($(2).rpms)
670 define target_depends
671 $(foreach package,$($(1)-DEPEND-PACKAGES) $($(1).depend-devel-packages),$(eval $(call package_depends_on_package,$(1),$(package))))
674 $(foreach package,$(ALL),$(eval $(call target_depends,$(package))))
677 # very rough for now (one module per package), targets only sfa for now
678 # the general idea here is, changing the specfile (for version number and all) is enough, and this
679 # gets passed to "make debian" in the module
680 # PREFIX: at one point we had passed PREFIX=/usr to this 'make debian'
681 # however it turned out we could manage this some other way (see manifold)
682 # so I'm reverting to simplicity
684 $(1)-debian: $(1)-tarball
685 $(call dpkgapt_install_stock_debs,$(1))
687 rsync -a MODULES/$(1)/ DEBIAN/$(1)/
688 make -C DEBIAN/$(1) "RPMTARBALL=$(HOME)/$($(1).tarballs)" "RPMVERSION=$($(1).rpm-version)" "RPMRELEASE=$($(1).rpm-release)" "RPMNAME=$($(1).rpm-name)" debian
689 $(call dpkgapt_uninstall_stock_debs,$(1))
692 $(foreach package,$(ALL),$(eval $(call target_debian,$(package))))
695 # usage: target_clean package
698 $(foreach module,$($(1)-MODULES),rm -rf MODULES/$(module);)
699 .PHONY: $(1)-clean-modules
700 CLEANS += $(1)-clean-modules
702 rm -rf $($(1).source)
703 .PHONY: $(1)-clean-source
704 CLEANS += $(1)-clean-source
706 rm -rf $($(1).tarballs)
707 .PHONY: $(1)-clean-tarball
708 CLEANS += $(1)-clean-tarball
710 rm -rf BUILD/$(notdir $($(1).source))
711 CLEANS += $(1)-clean-build
714 .PHONY: $(1)-clean-rpms
715 CLEANS += $(1)-clean-rpms
718 .PHONY: $(1)-clean-srpm
719 CLEANS += $(1)-clean-srpm
722 .PHONY: $(1)-clean-srpm
723 CLEANS += $(1)-clean-srpm
724 $(1)-codeclean: $(1)-clean-source $(1)-clean-tarball $(1)-clean-build $(1)-clean-rpms $(1)-clean-srpm $(1)-clean-debian
725 $(1)-clean: $(1)-clean-modules $(1)-codeclean
726 .PHONY: $(1)-codeclean $(1)-clean
728 rm -rf $($(1).specpath)
729 .PHONY: $(1)-clean-spec
732 .PHONY: $(1)-clean-make
733 $(1)-distclean: $(1)-distclean1 $(1)-distclean2
734 $(1)-distclean1: $(1)-clean-spec $(1)-clean-make
735 $(1)-distclean2: $(1)-clean
736 .PHONY: $(1)-distclean $(1)-distclean1 $(1)-distclean2
739 $(foreach package,$(ALL),$(eval $(call target_clean,$(package))))
747 @echo Available clean targets
750 ### brute force clean
752 rm -rf envfrompreviousrun.mk .rpmmacros spec2make header.spec SPECS MAKE $(DISTCLEANS)
754 rm -rf MODULES SOURCES BUILD BUILDROOT RPMS SRPMS tmp
755 distclean: distclean1 distclean2
756 .PHONY: distclean1 distclean2 distclean
759 -$(RPMYUM-UNINSTALL-STOCK) $(ALL-STOCK-DEVEL-RPMS)
762 # gather build information for the 'About' page
763 # when run from crontab, INIT_CWD not properly set (says /root ..)
764 # so, the nightly build passes BASE here
765 # also store BASE in .base for any post-processing purposes
767 @echo 'Creating myplc-release'
769 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx build info" >> $@
770 $(MAKE) --no-print-directory version-build >> $@
771 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx svn info" >> $@
772 $(MAKE) --no-print-directory version-tags >> $@
773 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx rpm info" >> $@
774 $(MAKE) --no-print-directory version-rpms >> $@
775 @echo $(BASE) > .base
778 @echo -n 'Build build-date: ' ; date '+%Y.%m.%d'
779 @echo -n 'Build build-time: ' ; date '+%H:%M-%Z'
780 @echo -n 'Build build-hostname: ' ; hostname
781 @echo "Build build-base: $(BASE)"
782 @echo "Build planetlab-distro: $(PLDISTRO)"
783 @echo "Build planetlab-tags: $(PLDISTROTAGS)"
784 @echo "Build target-arch: $(HOSTARCH)"
785 @echo "Build target-distro: $(DISTRO)"
786 @echo "Build target-distroname: $(DISTRONAME)"
787 @echo "Build target-release: $(RELEASE)"
788 @echo "Build target-personality: $(PERSONALITY)"
792 VFORMAT="%30s := %s\n"
793 define print_tag_target
795 @$(if $($(1)-SVNPATH),\
796 printf $(VFORMAT) $(1)-SVNPATH "$($(1)-SVNPATH)",\
797 printf $(VFORMAT) $(1)-GITPATH "$($(1)-GITPATH)" )
800 $(foreach module,$(ALL.modules), $(eval $(call print_tag_target,$(module))))
802 version-tags: $(foreach module, $(ALL.modules), $(module)-version-tag)
804 RFORMAT="%20s :: version=%s release=%s\n"
805 define rpm_version_target
807 @printf $(RFORMAT) $($(1).rpm-name) $($(1).rpm-version) $($(1).rpm-release)
808 version-rpms: $(1)-version-rpm
811 $(foreach package,$(sort $(ALL)), $(eval $(call rpm_version_target,$(package))))
813 versions: myplc-release version-build version-tags version-rpms
814 .PHONY: versions version-build version-rpms version-tags
816 #################### package info
817 PKGKEYS := tarballs source srpm rpms rpmnames rpm-release rpm-name rpm-version rpm-subversion
818 %-pkginfo: package=$(subst -pkginfo,,$@)
820 @$(foreach key,$(PKGKEYS),echo "$(package).$(key)=$($(package).$(key))";)
822 RPMKEYS := rpm-path package
823 %-rpminfo: rpm=$(subst -rpminfo,,$@)
825 @$(foreach key,$(RPMKEYS),echo "$(rpm).$(key)=$($(rpm).$(key))";)
827 #################### various lists - designed to run with stage1=true
829 @$(foreach package,$(ALL), echo package=$(package) ref_module=$($(package).module) modules=$($(package)-MODULES) rpmnames=$($(package).rpmnames); )
832 @$(foreach module,$(ALL.modules), echo module=$(module) \
833 $(if $($(module)-SVNPATH),svnpath=$($(module)-SVNPATH),gitpath=$($(module)-GITPATH)) ; )
836 @$(foreach module,$(ALL.modules), \
837 $(if $($(module)-BRANCH),echo module=$(module) branch=$($(module)-BRANCH);))
840 @$(foreach module,$(ALL.modules), \
841 $(if $($(module)-GITPATH), \
842 $(if $($(module)-BRANCH), \
843 echo $(module):$($(module)-BRANCH); , \
845 $(if $($(module)-BRANCH), \
846 echo $(module):$($(module)-BRANCH); , \
849 info: info-packages info-modules info-branches
851 .PHONY: info info-packages info-modules info-branches module-tools
854 @$(foreach package,$(ALL),$(if $(subst x1,,x$(words $($(package)-MODULES))), echo p=$(package) mods=$($(package)-MODULES) ;))
855 .PHONY: show-multi-modules
858 @echo "********** Run make in two stages:"
860 @echo "make stage1=true PLDISTRO=onelab"
861 @echo " -> extracts all spec files in SPECS/ and mk files in MAKE/"
862 @echo " as well as save PLDISTRO for subsequent runs"
864 @echo "********** Then you can use the following targets"
866 @echo " rebuilds everything"
867 @echo 'make util-vserver'
868 @echo " makes the RPMS related to util-vserver"
869 @echo " equivalent to 'make util-vserver-rpms'"
871 @echo "********** Or, vertically - step-by-step for a given package"
872 @echo 'make util-vserver-source'
873 @echo " creates source link in SOURCES/util-vserver-<version>"
874 @echo 'make util-vserver-tarball'
875 @echo " creates source tarball in SOURCES/util-vserver-<version>.<tarextension>"
876 @echo 'make util-vserver-srpm'
877 @echo " build source rpm in SRPMS/"
878 @echo 'make util-vserver-rpms'
879 @echo " build rpm(s) in RPMS/"
881 @echo "********** Or, horizontally, reach a step for all known packages"
883 @echo 'make tarballs'
887 @echo "********** Manual targets"
888 @echo "make package-compile"
889 @echo " The regular process uses rpmbuild --rebuild, that performs"
890 @echo " a compilation directory cleanup upon completion. If you need to investigate"
891 @echo " the intermediate compilation directory, use the -compile targets"
892 @echo "********** Cleaning examples"
894 @echo " removes the files made by make"
895 @echo "make distclean"
896 @echo " brute-force cleaning, removes entire directories - requires a new stage1"
897 @echo "make develclean"
898 @echo " rpm-uninstalls all devel packages installed during build"
900 @echo "make iptables-distclean"
901 @echo " deep clean for a given package"
902 @echo "make iptables-codeclean"
903 @echo " run this if you've made a local/manual change in the MODULES area for iptables"
905 @echo "make util-vserver-clean"
906 @echo " removes codebase, source, tarball, build, rpm and srpm for util-vserver"
907 @echo "make util-vserver-clean-modules"
908 @echo " and so on for source, tarball, build, rpm and srpm"
910 @echo "********** Info examples"
912 @echo " Displays the value of a given variable (here ALL)"
913 @echo " with only a single plus sign only the value is displayed"
915 @echo " is equivalent to make packages modules branches"
916 @echo " provides various info on these objects"
917 @echo "make ulogd-pkginfo"
918 @echo " Displays know attributes of a package"
919 @echo "make kernel-devel-rpminfo"
920 @echo " Displays know attributes of an rpm"
921 @echo "make stage1=true PLDISTROTAGS=planetlab-tags-4.2.mk packages modules branches module-tools"
922 @echo " Lists mentioned items - module-tools is used in modules.update"
924 @echo "********** Known pakages are"
927 #################### convenience, for debugging only
928 # make +foo : prints the value of $(foo)
929 # make ++foo : idem but verbose, i.e. foo=$(foo)
930 ++%: varname=$(subst +,,$@)
932 @echo "$(varname)=$($(varname))"
933 +%: varname=$(subst +,,$@)
935 @echo "$($(varname))"