2 # Thierry Parmentelat - INRIA Sophia Antipolis
8 # this extracts all specfiles and computes .mk from specfiles
9 # you need to specify PLDISTRO here if relevant - see below
11 # for more info on how to invoke this stuff
13 #################### (fedora) distributions
15 # (*) as of nov. 2007, myplc-devel is deprecated
16 # (*) instead, we create a fresh vserver that holds required tools (see e.g. planetlab-devel.lst)
17 # (*) the build uses the current fedora version as a target for the produced images
18 # (*) so you simply need to create a fedora 8 build image for building fedora-8 images
20 #################### (planetlab) distributions
22 # (*) see README-pldistros.txt
23 # (*) then you need to run
24 # make stage1=true PLDISTRO=onelab
27 # This build deals with 3 kinds of objects
29 # (*) packages are named upon the RPM name; they are mostly lowercase
30 # Add a package to ALL if you want it built as part of the default set.
31 # (*) modules are named after the subversion or git tree; we would wish to keep
32 # these names lowercase as far as possible
33 # (*) rpms are named in the spec files. A package typically defines several rpms;
34 # rpms are used for defining DEPEND-DEVEL-RPMS. See also package.rpmnames
36 # in simple cases, one package uses one module (in which case using the same name sounds right)
37 # but others might need several modules (e.g. image-creation packages like bootstrapfs need
38 # bootstrapfs and build); in this case the FIRST ONE is used for locating the specfile
40 #################### packages
41 # basics: how to build a package - you need to define the following variables
44 # a package needs one or several modules to build; the first one is used for
45 # some special purposes, like locating the specfile
47 # the package's specfile; this is relative to the FIRST module in package-MODULES
51 # (*) package-DEPEND-PACKAGES
52 # a set of (obviously local) *packages* that this package depends on, e.g.
53 # bootstrapfs-DEPEND-PACKAGES += kernel
54 # this impacts the order of the build
55 # (*) package-DEVEL-RPMS
56 # a set of stock rpms that this package needs at build-time
57 # this can also be set in config.<distro>/devel.pkgs or config.planetlab/devel.pkgs as appropriate
58 # (*) package-EXCLUDE-DEVEL-RPMS
59 # a set of stock *rpms* that the build will rpm-uninstall before building <package>
60 # this is intended to denote stock rpms, and the build will attempt to yum-install them
61 # back after the package is rebuilt
62 # This feature is not used at the moment and kept only just in case
63 # (*) package-DEPEND-DEVEL-RPMS
64 # a set of local *rpms* that the build will rpm-install before building <package>
65 # the build will attempt to uninstall those once the package is built, this is not fatal though
66 # this is intended to denote local rpms, i.e. ones that are results of our own build
67 # stock rpms should be mentioned in DEVEL-RPMS or in devel.pkgs as described above
68 # (*) package-DEPEND-FILES
69 # a set of files that the package depends on - and that make needs to know about
70 # if this contains RPMS/yumgroups.xml, then the toplevel RPMS's index
71 # is refreshed with createrepo prior to running rpmbuild
72 # (*) package-SPECVARS
73 # space-separated list of spec variable definitions, where you can reference make variables that
74 # belong to packages defined BEFORE the current one
75 # note: you should use = to define these (as opposed to :=)
76 # e.g. mydriver-SPECVARS = foo=$(kernel-rpm-release)
77 # would let you use the %release from the kernel's package when rpmbuild'ing mydriver
79 # (*) package-RPMFLAGS: Miscellaneous RPM flags
80 # this is passed to rpmbuild, as well as to spec2make for "exporting" various rpm variable
81 # to make; beware that some features, like --with=debug or --define 'foo bar' are not
82 # well handled by spec2make as of this writing, which can cause issues.
83 # hopefully this will be fixed...
84 # (*) package-BUILD-FROM-SRPM: set this to any non-empty value,
85 # if your package is able to produce a source rpm.
86 # In this case the build will first invoke 'make srpm', and then rebuild binaries from that
87 # (*) package-RPMDATE: set this to any non-empty value to get the rpm package's release field hold the current date
88 # this is useful for container packages, like e.g. bootstrapfs or vserver, that contains much more than the
91 #################### modules
92 # Required information about the various modules (set this in e.g. planetlab-tags.mk)
96 # the complete path where this module lies;
97 # you can specify the trunk or a given tag with this variable
101 # which by analogy with svn revision scheme, is expected to be <url>@<tag>
103 #################### automatic variables
105 # the build defines some make variables that are extracted from spec files
106 # to inspect those, see for example
107 # (*) $ make ulogd-pkginfo
108 # to see the list f variables attached to a given package
109 # (*) $ make kernel-devel-rpminfo
110 # to see the list of variables attached to a given rpm
114 # exported to spec files as plrelease
115 PLANETLAB_RELEASE = 5.0
120 # minimal compat with macos, just so this does not complain
121 HOSTARCH := $(shell uname -i 2> /dev/null || uname -m 2> /dev/null)
122 DISTRO := $(shell ./getdistro.sh)
123 RELEASE := $(shell ./getrelease.sh)
124 DISTRONAME := $(shell ./getdistroname.sh)
125 RPM-INSTALL-DEVEL := rpm --force -Uvh
126 # uninstall -- cannot force rpm -e
127 # need to ignore result, kernel-headers cannot be uninstalled as glibc depends on it
128 RPM-UNINSTALL-DEVEL := rpm -e
129 YUM-INSTALL-DEVEL := yum -y install
131 #################### Makefile
137 PLDISTRO := planetlab
140 ########## envfrompreviousrun.mk holds PLDISTRO and others - it is generated at stage1 (see below)
142 include envfrompreviousrun.mk
145 # when re-running the nightly build after failure, we need to gather the former values
146 # do this by running make stage1=skip +PLDISTRO
147 ifeq "$(stage1)" "skip"
148 include envfrompreviousrun.mk
151 #################### include onelab.mk
152 # describes the set of components
153 PLDISTROCONTENTS := $(PLDISTRO).mk
154 include $(PLDISTROCONTENTS)
156 #################### include <pldistro>-tags.mk
157 # describes where to fetch components
158 ifeq "$(PLDISTROTAGS)" ""
159 PLDISTROTAGS := $(PLDISTRO)-tags.mk
161 include $(PLDISTROTAGS)
163 # this used to be set in the -tags.mk files, but that turned out to require
164 # error-prone duplicate changes
165 # so now the nightly build script sets this to what it is currently using
166 # in case we run this manually, i.e. if build-GITPATH is not set
167 ifeq "$(build-GITPATH)" ""
168 build-GITPATH := $(shell git config remote.origin.url)
171 #################### pldistros that are defined remotely
173 define remote_pldistro_fetch_svn
174 $(1).config.SVNPATH := $(shell grep -v "^#" config.$(1).svnpath)
175 config.$(1): config.$(1).svnpath
176 @echo "Fetching (svn) details for remote pldistro $(1)"
177 svn export $$($(1).config.SVNPATH) config.$(1)
182 define remote_pldistro_fetch_git
183 $(1).config.GITPATH := $(shell grep -v "^#" config.$(1).gitpath)
184 $(1).config.gitrepo := $$(firstword $$(subst @, ,$$($(1).config.GITPATH)))
185 $(1).config.gittag := $$(word 2,$$(subst @, ,$$($(1).config.GITPATH)))
186 $(1).config.gittag := $$(if $$($(1).config.gittag),$$($(1).config.gittag),master)
187 config.$(1): GITPATH=$(shell grep -v "^#" config.$(1).gitpath)
188 config.$(1): config.$(1).gitpath
189 @echo "Fetching (git) details for remote pldistro $(1)"
191 git $(GITTAG) archive --remote=$$($(1).config.gitrepo) $$($(1).config.gittag) | tar -C config.$(1) -xf -
196 define remote_pldistro
197 $(1).mk: config.$(1)/$(1).mk
198 @echo 'creating $(1) from config.$(1)'
199 cp config.$(1)/$(1).mk $(1).mk
201 $(2).mk: config.$(1)/$(2).mk
202 @echo 'creating $(2) tags from config.$(1)'
203 cp config.$(1)/$(2).mk $(2).mk
205 config.$(1)/$(1).mk: config.$(1)
206 config.$(1)/$(2).mk: config.$(1)
208 DISTCLEANS += $(1).mk $(2).mk config.$(1)
209 $(eval $(call remote_pldistro_fetch_$(3),$(1)))
212 $(eval $(call remote_pldistro,wextoolbox,wextoolbox-tags,git))
214 ########## stage1 and stage1iter
215 # extract specs and compute .mk files by running
217 # entering stage1, we compute all the spec files
218 # then we use stage1iter to compute the .mk iteratively,
219 # ensuring that the n-1 first makefiles are loaded when creating the n-th one
220 # when stage1iter is set, it is supposed to be an index (starting at 1) in $(ALL)
222 ALLMKS := $(foreach package, $(ALL), MAKE/$(package).mk)
224 ### stage1iter : need some arithmetic, see
225 # http://www.cmcrossroads.com/articles/ask-mr.-make/learning-gnu-make-functions-with-arithmetic.html
226 ifneq "$(stage1iter)" ""
227 # the first n packages
228 packages := $(wordlist 1,$(words $(stage1iter)),$(ALL))
230 package := $(word $(words $(packages)),$(packages))
231 # the n-1 first packages
232 stage1iter_1 := $(wordlist 2,$(words $(stage1iter)),$(stage1iter))
233 previous := $(wordlist 1,$(words $(stage1iter_1)),$(ALL))
234 previousmks := $(foreach package,$(previous),MAKE/$(package).mk)
235 include $(previousmks)
238 @echo "========== stage1iter : $(package)"
239 # @echo "stage1iter : included .mk files : $(previousmks)"
240 all: $($(package).specpath)
241 all: MAKE/$(package).mk
247 @echo "========== stage1"
250 # specs and makes are done sequentially by stage1iter
253 arg=""; for n in $(ALL) ; do arg="$$arg x"; $(MAKE) --no-print-directory stage1iter="$$arg"; done
256 ### once .mks are OK, you can run make normally
263 # mention $(ALL) here rather than rpms
264 # this is because the inter-package dependencies are expressed like
265 # util-vserver: util-python
271 ### yumgroups.xml : compute from all known .pkgs files
274 ./yumgroups.sh $(PLDISTRO) > $@
276 createrepo = createrepo --quiet -g yumgroups.xml RPMS/
278 repo: RPMS/yumgroups.xml
285 # * we always use the first module's location (SVNPATH/GITPATH) to extract the spec file
286 # * no matter what SCM is used, SPEC should hold a relative path from the module's root
288 define stage1_package_vars
289 $(1).module := $(firstword $($(1)-MODULES))
290 $(1).specpath := SPECS/$(notdir $($(1)-SPEC))
291 $(1).moduledir := MODULES/$$($(1).module)
292 $(1).codespec := MODULES/$$($(1).module)/$($(1)-SPEC)
293 $(1).spec2makeflags := $(if $($(1)-WHITELIST-RPMS),--whitelist-rpms $($(1)-WHITELIST-RPMS),)
296 $(foreach package, $(ALL), $(eval $(call stage1_package_vars,$(package))))
298 # compute all modules
299 ALL.modules := build tests
300 $(foreach package,$(ALL), $(eval ALL.modules+=$($(package)-MODULES)))
301 ALL.modules:=$(sort $(ALL.modules))
303 # extract revision from -SVNPATH or tag from -GITPATH
304 define stage1_module_vars
305 ifneq "$($(1)-SVNPATH)" ""
306 $(1)-SVNPATH := $(strip $($(1)-SVNPATH))
307 $(1)-SCMPATH := $(strip $($(1)-SVNPATH))
309 $(1)-GITPATH := $$(strip $$($(1)-GITPATH))
310 $(1)-SCMPATH := $$(strip $$($(1)-GITPATH))
311 $(1).gitrepo := $$(firstword $$(subst @, ,$$($(1)-GITPATH)))
312 $(1).gittag := $$(word 2,$$(subst @, ,$$($(1)-GITPATH)))
313 $(1).gittag := $$(if $$($(1).gittag),$$($(1).gittag),master)
317 $(foreach module,$(ALL.modules), $(eval $(call stage1_module_vars,$(module))))
320 # for each package, compute whether we need to set date
321 # the heuristic is that we mention the date as part of the rpm release flag if
322 # (*) the package has requested it by setting package-RPMDATE (container packages should do that)
323 # (*) or SVNPATH contains 'trunk' or 'branches'
324 # (*) or GITPATH has no '@' (trunk)
325 # (*) or GITPATH contains a '@', and the gittag part has no '-' (this is to tell a tag from a branch..)
327 define package_hasdate
328 $(1).has-date = $(if $($(1)-RPMDATE),yes, \
329 $(if $($($(1).module)-SVNPATH), \
330 $(if $(findstring /trunk,$($($(1).module)-SVNPATH)),yes, \
331 $(if $(findstring /branches,$($($(1).module)-SVNPATH)),yes,)), \
332 $(if $(not $($($(1).module).gittag)), yes,\
333 $(if $(findstring -,$($($(1).module).gittag)),,yes))))
336 $(foreach package, $(ALL), $(eval $(call package_hasdate,$(package))))
338 ### the common header for generated specfiles
339 # useful when trying new specfiles manually
341 (echo -n "# Generated by planetlab build from $($(1)-SPEC) on " ; date) > $@
342 echo "%define distro $(DISTRO)" >> $@
343 echo "%define distrorelease $(RELEASE)" >> $@
344 echo "%define distroname $(DISTRONAME)" >> $@
345 echo "%define pldistro $(PLDISTRO)" >> $@
346 echo "%define plrelease $(PLANETLAB_RELEASE)" >> $@
347 echo "# use MD5 and gzip for binary and source files" >> $@
348 echo "%global _binary_filedigest_algorithm 1" >> $@
349 echo "%global _source_filedigest_algorithm 1" >> $@
350 echo "%global _source_payload w9.gzdio" >> $@
351 echo "%global _binary_payload w9.gzdio" >> $@
353 ### make up spec file - extract module first
355 $($(1).specpath): header.spec $($(1).codespec)
357 cat header.spec > $($(1).specpath)
358 echo "%define SCMURL $($($(1).module)-SCMPATH)" >> $($(1).specpath)
359 $(if $($(1).has-date),echo "%define date $(shell date +%Y.%m.%d)" >> $($(1).specpath),)
360 $(if $($(1)-SPECVARS), \
361 $(foreach line,$($(1)-SPECVARS), \
362 echo "%define" $(word 1,$(subst =, ,$(line))) "$(word 2,$(subst =, ,$(line)))" >> $($(1).specpath) ;))
363 echo "# included from $($(1)-SPEC)" >> $($(1).specpath)
364 cat $($(1).codespec) >> $($(1).specpath)
366 $($(1).codespec): $($(1).moduledir)
370 $(foreach package,$(ALL),$(eval $(call target_spec,$(package))))
372 ### module extraction
373 define target_extract_module
375 @(echo -n "XXXXXXXXXXXXXXX -- BEG MODULE $(1) : $@ " ; date)
378 $(if $($(1)-SVNPATH),\
379 svn export $($(1)-SVNPATH) $(1),\
380 mkdir $(1) ; (git archive --remote=$($(1).gitrepo) $($(1).gittag) | tar -C $(1) -xf - ) \
381 || { rm -rf $(1); false; } )
382 @(echo -n "XXXXXXXXXXXXXXX -- END MODULE $(1) : $@ " ; date)
384 $(1)-module: MODULES/$(1)
388 $(foreach module,$(ALL.modules),$(eval $(call target_extract_module,$(module))))
391 # use this makefile to extract tests rather than extracting manually in vbuild-nightly
397 # Base rpmbuild in the current directory
398 # issues on fedora 8 : see the following posts
399 # http://forums.fedoraforum.org/showthread.php?t=39625 - and more specifically post#6
400 # https://www.redhat.com/archives/fedora-devel-list/2007-November/msg00171.html
402 FAKEROOT=/longbuildroot
403 PWD=$(shell /bin/pwd)
404 ifeq "$(PWD)" "$(REALROOT)"
405 export HOME := $(FAKEROOT)
407 export HOME := $(PWD)
410 ifeq "$(shell pwd)" "/build"
411 rm -f $(FAKEROOT) ; ln -s $(REALROOT) $(FAKEROOT)
414 echo "%_topdir $(HOME)" >> $@
415 echo "%_tmppath $(HOME)/tmp" >> $@
416 echo "%__spec_install_pre %{___build_pre}" >> $@
417 ./getrpmmacros.sh >> $@
419 ### this utility allows to extract various info from a spec file
420 ### and to define them in makefiles
421 # use the C code where it works as it's the original one, use the python code otherwise
422 spec2make: spec2make.c
423 $(CC) -g -Wall $< -o $@ -lrpm -lrpmbuild -lrpmio -lpopt || ln -s spec2make.py $@
425 ### run spec2make on the spec file and include the result
426 # usage: spec2make package
427 # with old rpms (f8&c5) and too recent specfiles (the kernel), we need a patch to spec2make
428 # so when <package-NEEDSPECK2MAKEHACK is set, we run spec2make with the --hack flag
430 MAKE/$(1).mk: $($(1).specpath) spec2make .rpmmacros
432 ./spec2make $($(1).spec2makeflags) $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk || { rm MAKE/$(1).mk; exit 1; }
435 $(foreach package,$(ALL),$(eval $(call target_mk,$(package))))
437 # stores env variables in a file
438 # this is done at stage1. later run wont get confused
439 SAVED_VARS=PLDISTRO PLDISTROTAGS build-GITPATH PERSONALITY MAILTO BASE WEBPATH TESTBUILDURL WEBROOT
440 # also remember variable settings in alias, like sfa-GITPATH=git://git.f-lab.fr/sfa.git@generic
441 # but don't save stage1
442 ASSIGNS=$(foreach chunk,$(MAKEFLAGS),$(if $(findstring =,$(chunk)),$(if $(findstring stage1,$(chunk)),,$(chunk)),))
443 envfrompreviousrun.mk:
444 @echo "# do not edit" > $@
445 @$(foreach var,$(SAVED_VARS),echo "$(var):=$($(var))" >> $@ ;)
446 @$(foreach chunk,$(ASSIGNS),echo "override $(chunk)" | sed -e s,=,:=, >> $@;)
447 @echo "# do not edit" > aliases
448 @echo -n "alias m=\"make " >> aliases
449 @$(foreach var,$(SAVED_VARS),echo -n " $(var)=$($(var))" >> aliases ;)
450 @echo -n $(ASSIGNS) >> aliases
451 @echo "\"" >> aliases
452 @echo "alias m1=\"m stage1=true\"" >> aliases
454 envfrompreviousrun: envfrompreviousrun.mk
455 .PHONY: envfrompreviousrun
457 # always refresh this
458 all: envfrompreviousrun
460 #################### regular make
462 define stage2_variables
463 ### devel dependencies
464 $(1).rpmbuild = $(RPMBUILD) $($(1)-RPMFLAGS)
465 $(1).all-devel-rpm-paths := $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).rpm-path))
466 $(1).depend-devel-packages := $(sort $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).package)))
467 ALL-DEVEL-RPMS += $($(1)-DEPEND-DEVEL-RPMS)
470 $(foreach package,$(ALL),$(eval $(call stage2_variables,$(package))))
471 ALL-DEVEL-RPMS := $(sort $(ALL-DEVEL-RPMS))
474 ### pack sources into tarballs
475 ALLTARBALLS:= $(foreach package, $(ALL), $($(package).tarballs))
476 tarballs: $(ALLTARBALLS)
477 @echo $(words $(ALLTARBALLS)) source tarballs OK
480 SOURCES/%.tar.bz2: SOURCES/%
481 tar chpjf $@ -C SOURCES $*
483 SOURCES/%.tar.gz: SOURCES/%
484 tar chpzf $@ -C SOURCES $*
486 SOURCES/%.tgz: SOURCES/%
487 tar chpzf $@ -C SOURCES $*
490 URLS/%: url=$(subst @colon@,:,$(subst @slash@,/,$(notdir $@)))
491 URLS/%: basename=$(notdir $(url))
493 echo curl $(url) -o SOURCES/$(basename)
496 ### the directory SOURCES/<package>-<version> is made
497 # with a (set of) copy -rl from MODULES/<module>
498 # the former is $(package.source)
499 ALLSOURCES:=$(foreach package, $(ALL), $($(package).source))
500 # so that make does not use the rule below directly for creating the tarball files
501 .SECONDARY: $(ALLSOURCES)
503 sources: $(ALLSOURCES)
504 @echo $(words $(ALLSOURCES)) versioned source trees OK
507 # argument is a package
508 # do things differently if multiple modules are mentioned (sigh..)
509 define target_copy_link_modules_sources
510 $($(1).source): $(foreach module,$($(1)-MODULES),MODULES/$(module))
511 $(if $(word 2,$($(1)-MODULES)),\
512 mkdir -p $($(1).source) && $(foreach module,$($(1)-MODULES), cp -rl MODULES/$(module) $($(1).source)/$(module);) ,\
513 mkdir -p SOURCES && cp -rl MODULES/$($(1)-MODULES) $($(1).source))
516 $(foreach package,$(ALL),$(eval $(call target_copy_link_modules_sources,$(package))))
519 ALLMODULES:=$(foreach module, $(ALL.modules), MODULES/$(module))
520 .SECONDARY: $(ALLMODULES)
521 modules: $(ALLMODULES)
522 @echo $(words $(ALLMODULES)) modules OK "(fetched from scm)"
526 ALLSRPMS:=$(foreach package,$(ALL),$($(package).srpm))
528 @echo $(words $(ALLSRPMS)) source rpms OK
532 # install the DEVEL-RPMS rpms if defined
533 define handle_stock_devel_rpms_pre
534 $(if $($(1)-DEVEL-RPMS), echo "Installing for $(1)-DEVEL-RPMS" ; $(YUM-INSTALL-DEVEL) $($(1)-DEVEL-RPMS))
537 ### these macro handles the DEPEND-DEVEL-RPMS and EXCLUDE-DEVEL-RPMS tags for a hiven package
538 # before building : rpm-install DEPEND-DEVEL-RPMS and rpm-uninstall EXCLUDE
539 define handle_local_devel_rpms_pre
540 $(if $($(1).all-devel-rpm-paths), echo "Installing for $(1)-DEPEND-DEVEL-RPMS" ; $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
541 $(if $($(1)-EXCLUDE-DEVEL-RPMS), echo "Uninstalling for $(1)-EXCLUDE-DEVEL-RPMS" ; $(RPM-UNINSTALL-DEVEL) $($(1)-EXCLUDE-DEVEL-RPMS))
544 define handle_local_devel_rpms_post
545 -$(if $($(1)-DEPEND-DEVEL-RPMS), echo "Unstalling for $(1)-DEPEND-DEVEL-RPMS" ; $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
546 $(if $($(1)-EXCLUDE-DEVEL-RPMS), "Reinstalling for $(1)-EXCLUDE-DEVEL-RPMS" ; $(YUM-INSTALL-DEVEL) $($(1)-EXCLUDE-DEVEL-RPMS) )
549 # usage: target_source_rpm package
550 define target_source_rpm
551 ifeq "$($(1)-BUILD-FROM-SRPM)" ""
552 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).tarballs)
553 mkdir -p BUILD SRPMS tmp
554 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using SOURCES) " ; date)
555 $(call handle_stock_devel_rpms_pre,$(1))
556 $(call handle_local_devel_rpms_pre,$(1))
557 $($(1).rpmbuild) -bs $($(1).specpath)
558 $(call handle_local_devel_rpms_post,$(1))
559 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
561 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).source)
562 mkdir -p BUILD SRPMS tmp
563 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using make srpm) " ; date)
564 $(call handle_stock_devel_rpms_pre,$(1))
565 $(call handle_local_devel_rpms_pre,$(1))
566 make -C $($(1).source) srpm SPECFILE=$(HOME)/$($(1).specpath) EXPECTED_SRPM=$(notdir $($(1).srpm)) && \
567 rm -f SRPMS/$(notdir $($(1).srpm)) && \
568 ln $($(1).source)/$(notdir $($(1).srpm)) SRPMS/$(notdir $($(1).srpm))
569 $(call handle_local_devel_rpms_post,$(1))
570 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
574 $(foreach package,$(ALL),$(eval $(call target_source_rpm,$(package))))
576 ### binary rpms are made from source rpm
577 ALLRPMS:=$(foreach package,$(ALL),$($(package).rpms))
578 # same as above, mention $(ALL) and not $(ALLRPMS)
580 @echo $(words $(ALLRPMS)) binary rpms OK
583 # use tmp dirs when building binary rpm so make remains idempotent
584 # otherwise SOURCES/ or SPEC gets touched again - which leads to rebuilding
585 RPM-USE-TMP-DIRS = --define "_sourcedir $(HOME)/tmp" --define "_specdir $(HOME)/tmp"
586 RPM-USE-COMPILE-DIRS = --define "_sourcedir $(HOME)/COMPILE" --define "_specdir $(HOME)/COMPILE"
588 # usage: build_binary_rpm package
589 # xxx hacky - invoke createrepo if DEPEND-FILES mentions RPMS/yumgroups.xml
590 define target_binary_rpm
591 $($(1).rpms): $($(1).srpm)
593 @(echo -n "XXXXXXXXXXXXXXX -- BEG RPM $(1) " ; date)
594 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
595 $(call handle_stock_devel_rpms_pre,$(1))
596 $(call handle_local_devel_rpms_pre,$(1))
597 $($(1).rpmbuild) --rebuild $(RPM-USE-TMP-DIRS) $($(1).srpm)
598 $(call handle_local_devel_rpms_post,$(1))
599 @(echo -n "XXXXXXXXXXXXXXX -- END RPM $(1) " ; date)
600 # for manual use only - in case we need to investigate the results of an rpmbuild
601 $(1)-compile: $($(1).srpm)
603 @(echo -n "XXXXXXXXXXXXXXX -- BEG compile $(1) " ; date)
604 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
605 $(call handle_stock_devel_rpms_pre,$(1))
606 $(call handle_local_devel_rpms_pre,$(1))
607 $($(1).rpmbuild) --recompile $(RPM-USE-TMP-DIRS) $($(1).srpm)
608 $(call handle_local_devel_rpms_post,$(1))
609 @(echo -n "XXXXXXXXXXXXXXX -- END compile $(1) " ; date)
613 $(foreach package,$(ALL),$(eval $(call target_binary_rpm,$(package))))
615 # e.g. make proper -> does propers rpms
616 # usage shorthand_target package
617 define target_shorthand
620 $(1)-spec: $($(1)-SPEC)
624 $(1)-tarball: $($(1).tarballs)
627 $(1)-source: $($(1).source)
628 $(1)-rpms: $($(1).rpms)
630 $(1)-srpm: $($(1).srpm)
634 $(foreach package,$(ALL),$(eval $(call target_shorthand,$(package))))
636 ### file dependencies
637 define package_depends_on_file
642 define target_dependfiles
643 $(foreach file,$($(1)-DEPEND-FILES),$(eval $(call package_depends_on_file,$(1),$(file))))
646 $(foreach package,$(ALL),$(eval $(call target_dependfiles,$(package))))
648 ### package dependencies
649 define package_depends_on_package
652 $($(1).srpm):$($(2).rpms)
655 define target_depends
656 $(foreach package,$($(1)-DEPEND-PACKAGES) $($(1).depend-devel-packages),$(eval $(call package_depends_on_package,$(1),$(package))))
659 $(foreach package,$(ALL),$(eval $(call target_depends,$(package))))
662 # usage: target_clean package
665 $(foreach module,$($(1)-MODULES),rm -rf MODULES/$(module);)
666 .PHONY: $(1)-clean-modules
667 CLEANS += $(1)-clean-modules
669 rm -rf $($(1).source)
670 .PHONY: $(1)-clean-source
671 CLEANS += $(1)-clean-source
673 rm -rf $($(1).tarballs)
674 .PHONY: $(1)-clean-tarball
675 CLEANS += $(1)-clean-tarball
677 rm -rf BUILD/$(notdir $($(1).source))
678 CLEANS += $(1)-clean-build
681 .PHONY: $(1)-clean-rpms
682 CLEANS += $(1)-clean-rpms
685 .PHONY: $(1)-clean-srpm
686 CLEANS += $(1)-clean-srpm
687 $(1)-codeclean: $(1)-clean-source $(1)-clean-tarball $(1)-clean-build $(1)-clean-rpms $(1)-clean-srpm
688 $(1)-clean: $(1)-clean-modules $(1)-codeclean
689 .PHONY: $(1)-codeclean $(1)-clean
691 rm -rf $($(1).specpath)
692 .PHONY: $(1)-clean-spec
695 .PHONY: $(1)-clean-make
696 $(1)-distclean: $(1)-distclean1 $(1)-distclean2
697 $(1)-distclean1: $(1)-clean-spec $(1)-clean-make
698 $(1)-distclean2: $(1)-clean
699 .PHONY: $(1)-distclean $(1)-distclean1 $(1)-distclean2
702 $(foreach package,$(ALL),$(eval $(call target_clean,$(package))))
710 @echo Available clean targets
713 ### brute force clean
715 rm -rf envfrompreviousrun.mk .rpmmacros spec2make header.spec SPECS MAKE $(DISTCLEANS)
717 rm -rf MODULES SOURCES BUILD BUILDROOT RPMS SRPMS tmp
718 distclean: distclean1 distclean2
719 .PHONY: distclean1 distclean2 distclean
722 -$(RPM-UNINSTALL-DEVEL) $(ALL-DEVEL-RPMS)
725 # gather build information for the 'About' page
726 # when run from crontab, INIT_CWD not properly set (says /root ..)
727 # so, the nightly build passes BASE here
728 # also store BASE in .base for any post-processing purposes
730 @echo 'Creating myplc-release'
732 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx build info" >> $@
733 $(MAKE) --no-print-directory version-build >> $@
734 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx svn info" >> $@
735 $(MAKE) --no-print-directory version-tags >> $@
736 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx rpm info" >> $@
737 $(MAKE) --no-print-directory version-rpms >> $@
738 @echo $(BASE) > .base
741 @echo -n 'Build build-date: ' ; date '+%Y.%m.%d'
742 @echo -n 'Build build-time: ' ; date '+%H:%M-%Z'
743 @echo -n 'Build build-hostname: ' ; hostname
744 @echo "Build build-base: $(BASE)"
745 @echo "Build planetlab-distro: $(PLDISTRO)"
746 @echo "Build planetlab-tags: $(PLDISTROTAGS)"
747 @echo "Build target-arch: $(HOSTARCH)"
748 @echo "Build target-distro: $(DISTRO)"
749 @echo "Build target-distroname: $(DISTRONAME)"
750 @echo "Build target-release: $(RELEASE)"
751 @echo "Build target-personality: $(PERSONALITY)"
755 VFORMAT="%30s := %s\n"
756 define print_tag_target
758 @$(if $($(1)-SVNPATH),\
759 printf $(VFORMAT) $(1)-SVNPATH "$($(1)-SVNPATH)",\
760 printf $(VFORMAT) $(1)-GITPATH "$($(1)-GITPATH)" )
763 $(foreach module,$(ALL.modules), $(eval $(call print_tag_target,$(module))))
765 version-tags: $(foreach module, $(ALL.modules), $(module)-version-tag)
767 RFORMAT="%20s :: version=%s release=%s\n"
768 define rpm_version_target
770 @printf $(RFORMAT) $($(1).rpm-name) $($(1).rpm-version) $($(1).rpm-release)
771 version-rpms: $(1)-version-rpm
774 $(foreach package,$(sort $(ALL)), $(eval $(call rpm_version_target,$(package))))
776 versions: myplc-release version-build version-tags version-rpms
777 .PHONY: versions version-build version-rpms version-tags
779 #################### package info
780 PKGKEYS := tarballs source srpm rpms rpmnames rpm-release rpm-name rpm-version rpm-subversion
781 %-pkginfo: package=$(subst -pkginfo,,$@)
783 @$(foreach key,$(PKGKEYS),echo "$(package).$(key)=$($(package).$(key))";)
785 RPMKEYS := rpm-path package
786 %-rpminfo: rpm=$(subst -rpminfo,,$@)
788 @$(foreach key,$(RPMKEYS),echo "$(rpm).$(key)=$($(rpm).$(key))";)
790 #################### various lists - designed to run with stage1=true
792 @$(foreach package,$(ALL), echo package=$(package) ref_module=$($(package).module) modules=$($(package)-MODULES) rpmnames=$($(package).rpmnames); )
795 @$(foreach module,$(ALL.modules), echo module=$(module) \
796 $(if $($(module)-SVNPATH),svnpath=$($(module)-SVNPATH),gitpath=$($(module)-GITPATH)) ; )
799 @$(foreach module,$(ALL.modules), \
800 $(if $($(module)-BRANCH),echo module=$(module) branch=$($(module)-BRANCH);))
803 @$(foreach module,$(ALL.modules), \
804 $(if $($(module)-GITPATH), \
805 $(if $($(module)-BRANCH), \
806 echo $(module):$($(module)-BRANCH); , \
808 $(if $($(module)-BRANCH), \
809 echo $(module):$($(module)-BRANCH); , \
812 info: info-packages info-modules info-branches
814 .PHONY: info info-packages info-modules info-branches module-tools
817 @$(foreach package,$(ALL),$(if $(subst x1,,x$(words $($(package)-MODULES))), echo p=$(package) mods=$($(package)-MODULES) ;))
818 .PHONY: show-multi-modules
821 @echo "********** Run make in two stages:"
823 @echo "make stage1=true PLDISTRO=onelab"
824 @echo " -> extracts all spec files in SPECS/ and mk files in MAKE/"
825 @echo " as well as save PLDISTRO for subsequent runs"
827 @echo "********** Then you can use the following targets"
829 @echo " rebuilds everything"
830 @echo 'make util-vserver'
831 @echo " makes the RPMS related to util-vserver"
832 @echo " equivalent to 'make util-vserver-rpms'"
834 @echo "********** Or, vertically - step-by-step for a given package"
835 @echo 'make util-vserver-source'
836 @echo " creates source link in SOURCES/util-vserver-<version>"
837 @echo 'make util-vserver-tarball'
838 @echo " creates source tarball in SOURCES/util-vserver-<version>.<tarextension>"
839 @echo 'make util-vserver-srpm'
840 @echo " build source rpm in SRPMS/"
841 @echo 'make util-vserver-rpms'
842 @echo " build rpm(s) in RPMS/"
844 @echo "********** Or, horizontally, reach a step for all known packages"
846 @echo 'make tarballs'
850 @echo "********** Manual targets"
851 @echo "make package-compile"
852 @echo " The regular process uses rpmbuild --rebuild, that performs"
853 @echo " a compilation directory cleanup upon completion. If you need to investigate"
854 @echo " the intermediate compilation directory, use the -compile targets"
855 @echo "********** Cleaning examples"
857 @echo " removes the files made by make"
858 @echo "make distclean"
859 @echo " brute-force cleaning, removes entire directories - requires a new stage1"
860 @echo "make develclean"
861 @echo " rpm-uninstalls all devel packages installed during build"
863 @echo "make iptables-distclean"
864 @echo " deep clean for a given package"
865 @echo "make iptables-codeclean"
866 @echo " run this if you've made a local/manual change in the MODULES area for iptables"
868 @echo "make util-vserver-clean"
869 @echo " removes codebase, source, tarball, build, rpm and srpm for util-vserver"
870 @echo "make util-vserver-clean-modules"
871 @echo " and so on for source, tarball, build, rpm and srpm"
873 @echo "********** Info examples"
875 @echo " Displays the value of a given variable (here ALL)"
876 @echo " with only a single plus sign only the value is displayed"
878 @echo " is equivalent to make packages modules branches"
879 @echo " provides various info on these objects"
880 @echo "make ulogd-pkginfo"
881 @echo " Displays know attributes of a package"
882 @echo "make kernel-devel-rpminfo"
883 @echo " Displays know attributes of an rpm"
884 @echo "make stage1=true PLDISTROTAGS=planetlab-tags-4.2.mk packages modules branches module-tools"
885 @echo " Lists mentioned items - module-tools is used in modules.update"
887 @echo "********** Known pakages are"
890 #################### convenience, for debugging only
891 # make +foo : prints the value of $(foo)
892 # make ++foo : idem but verbose, i.e. foo=$(foo)
893 ++%: varname=$(subst +,,$@)
895 @echo "$(varname)=$($(varname))"
896 +%: varname=$(subst +,,$@)
898 @echo "$($(varname))"