2 # Thierry Parmentelat - INRIA Sophia Antipolis
8 # this extracts all specfiles and computes .mk from specfiles
9 # you need to specify PLDISTRO here if relevant - see below
11 # for more info on how to invoke this stuff
13 #################### (fedora) distributions
15 # (*) as of nov. 2007, myplc-devel is deprecated
16 # (*) instead, we create a fresh vserver that holds required tools (see e.g. planetlab-devel.lst)
17 # (*) the build uses the current fedora version as a target for the produced images
18 # (*) so you simply need to create a fedora 8 build image for building fedora-8 images
20 #################### (planetlab) distributions
22 # (*) see README-pldistros.txt
23 # (*) then you need to run
24 # make stage1=true PLDISTRO=onelab
27 # This build deals with 3 kinds of objects
29 # (*) packages are named upon the RPM name; they are mostly lowercase
30 # Add a package to ALL if you want it built as part of the default set.
31 # (*) modules are named after the subversion or git tree; we would wish to keep
32 # these names lowercase as far as possible
33 # (*) rpms are named in the spec files. A package typically defines several rpms;
34 # rpms are used for defining DEPEND-DEVEL-RPMS. See also package.rpmnames
36 # in simple cases, one package uses one module (in which case using the same name sounds right)
37 # but others might need several modules (e.g. image-creation packages like bootstrapfs need
38 # bootstrapfs and build); in this case the FIRST ONE is used for locating the specfile
40 #################### packages
41 # basics: how to build a package - you need to define the following variables
44 # a package needs one or several modules to build; the first one is used for
45 # some special purposes, like locating the specfile
47 # the package's specfile; this is relative to the FIRST module in package-MODULES
51 # (*) package-DEPEND-PACKAGES
52 # a set of (obviously local) *packages* that this package depends on, e.g.
53 # bootstrapfs-DEPEND-PACKAGES += kernel
54 # this impacts the order of the build
55 # (*) package-DEVEL-RPMS
56 # a set of stock rpms that this package needs at build-time
57 # this can also be set in config.<distro>/devel.pkgs or config.planetlab/devel.pkgs as appropriate
58 # (*) package-EXCLUDE-DEVEL-RPMS
59 # a set of stock *rpms* that the build will rpm-uninstall before building <package>
60 # this is intended to denote stock rpms, and the build will attempt to yum-install them
61 # back after the package is rebuilt
62 # This feature is not used at the moment and kept only just in case
63 # (*) package-DEPEND-DEVEL-RPMS
64 # a set of local *rpms* that the build will rpm-install before building <package>
65 # the build will attempt to uninstall those once the package is built, this is not fatal though
66 # this is intended to denote local rpms, i.e. ones that are results of our own build
67 # stock rpms should be mentioned in DEVEL-RPMS or in devel.pkgs as described above
68 # (*) package-DEPEND-FILES
69 # a set of files that the package depends on - and that make needs to know about
70 # if this contains RPMS/yumgroups.xml, then the toplevel RPMS's index
71 # is refreshed with createrepo prior to running rpmbuild
72 # (*) package-SPECVARS
73 # space-separated list of spec variable definitions, where you can reference make variables that
74 # belong to packages defined BEFORE the current one
75 # note: you should use = to define these (as opposed to :=)
76 # e.g. mydriver-SPECVARS = foo=$(kernel-rpm-release)
77 # would let you use the %release from the kernel's package when rpmbuild'ing mydriver
79 # (*) package-RPMFLAGS: Miscellaneous RPM flags
80 # this is passed to rpmbuild, as well as to spec2make for "exporting" various rpm variable
81 # to make; beware that some features, like --with=debug or --define 'foo bar' are not
82 # well handled by spec2make as of this writing, which can cause issues.
83 # hopefully this will be fixed...
84 # (*) package-BUILD-FROM-SRPM: set this to any non-empty value,
85 # if your package is able to produce a source rpm.
86 # In this case the build will first invoke 'make srpm', and then rebuild binaries from that
87 # (*) package-RPMDATE: set this to any non-empty value to get the rpm package's release field hold the current date
88 # this is useful for container packages, like e.g. bootstrapfs or vserver, that contains much more than the
91 #################### modules
92 # Required information about the various modules (set this in e.g. planetlab-tags.mk)
96 # the complete path where this module lies;
97 # you can specify the trunk or a given tag with this variable
101 # which by analogy with svn revision scheme, is expected to be <url>@<tag>
103 #################### automatic variables
105 # the build defines some make variables that are extracted from spec files
106 # to inspect those, see for example
107 # (*) $ make ulogd-pkginfo
108 # to see the list f variables attached to a given package
109 # (*) $ make kernel-devel-rpminfo
110 # to see the list of variables attached to a given rpm
114 # exported to spec files as plrelease
115 PLANETLAB_RELEASE = 5.0
120 # minimal compat with macos, just so this does not complain
121 HOSTARCH := $(shell uname -i 2> /dev/null || uname -m 2> /dev/null)
122 DISTRO := $(shell ./getdistro.sh)
123 RELEASE := $(shell ./getrelease.sh)
124 DISTRONAME := $(shell ./getdistroname.sh)
125 RPM-INSTALL-DEVEL := rpm --force -Uvh
126 # uninstall -- cannot force rpm -e
127 # need to ignore result, kernel-headers cannot be uninstalled as glibc depends on it
128 RPM-UNINSTALL-DEVEL := rpm -e
129 YUM-INSTALL-DEVEL := yum -y install
131 #################### Makefile
137 PLDISTRO := planetlab
140 ########## savedpldistro.mk holds PLDISTRO - it is generated at stage1 (see below)
142 include savedpldistro.mk
145 # when re-running the nightly build after failure, we need to gather the former values
146 # do this by running make stage1=skip +PLDISTRO
147 ifeq "$(stage1)" "skip"
148 include savedpldistro.mk
151 #################### include onelab.mk
152 # describes the set of components
153 PLDISTROCONTENTS := $(PLDISTRO).mk
154 include $(PLDISTROCONTENTS)
156 #################### include <pldistro>-tags.mk
157 # describes where to fetch components
158 ifeq "$(PLDISTROTAGS)" ""
159 PLDISTROTAGS := $(PLDISTRO)-tags.mk
161 include $(PLDISTROTAGS)
163 # this used to be set in the -tags.mk files, but that turned out to require
164 # error-prone duplicate changes
165 # so now the nightly build script sets this to what it is currently using
166 # in case we run this manually, i.e. if neither build-SVNPATH nor build-GITPATH is set
167 ifeq "$(build-SVNPATH)$(build-GITPATH)" ""
168 build-GITPATH-local := $(shell git config remote.origin.url)
169 ifneq "$(build-GITPATH-local)" ""
170 build-GITPATH := $(build-GITPATH-local)
172 build-SVNPATH := $(lastword $(shell svn info 2> /dev/null | grep URL:))
176 #################### pldistros that are defined remotely
178 define remote_pldistro_fetch_svn
179 $(1).config.SVNPATH := $(shell grep -v "^#" config.$(1).svnpath)
180 config.$(1): config.$(1).svnpath
181 @echo "Fetching (svn) details for remote pldistro $(1)"
182 svn export $$($(1).config.SVNPATH) config.$(1)
187 define remote_pldistro_fetch_git
188 $(1).config.GITPATH := $(shell grep -v "^#" config.$(1).gitpath)
189 $(1).config.gitrepo := $$(firstword $$(subst @, ,$$($(1).config.GITPATH)))
190 $(1).config.gittag := $$(word 2,$$(subst @, ,$$($(1).config.GITPATH)))
191 $(1).config.gittag := $$(if $$($(1).config.gittag),$$($(1).config.gittag),master)
192 config.$(1): GITPATH=$(shell grep -v "^#" config.$(1).gitpath)
193 config.$(1): config.$(1).gitpath
194 @echo "Fetching (git) details for remote pldistro $(1)"
196 git $(GITTAG) archive --remote=$$($(1).config.gitrepo) $$($(1).config.gittag) | tar -C config.$(1) -xf -
201 define remote_pldistro
202 $(1).mk: config.$(1)/$(1).mk
203 @echo 'creating $(1) from config.$(1)'
204 cp config.$(1)/$(1).mk $(1).mk
206 $(2).mk: config.$(1)/$(2).mk
207 @echo 'creating $(2) tags from config.$(1)'
208 cp config.$(1)/$(2).mk $(2).mk
210 config.$(1)/$(1).mk: config.$(1)
211 config.$(1)/$(2).mk: config.$(1)
213 DISTCLEANS += $(1).mk $(2).mk config.$(1)
214 $(eval $(call remote_pldistro_fetch_$(3),$(1)))
217 $(eval $(call remote_pldistro,wextoolbox,wextoolbox-tags,git))
219 ########## stage1 and stage1iter
220 # extract specs and compute .mk files by running
222 # entering stage1, we compute all the spec files
223 # then we use stage1iter to compute the .mk iteratively,
224 # ensuring that the n-1 first makefiles are loaded when creating the n-th one
225 # when stage1iter is set, it is supposed to be an index (starting at 1) in $(ALL)
227 ALLMKS := $(foreach package, $(ALL), MAKE/$(package).mk)
229 ### stage1iter : need some arithmetic, see
230 # http://www.cmcrossroads.com/articles/ask-mr.-make/learning-gnu-make-functions-with-arithmetic.html
231 ifneq "$(stage1iter)" ""
232 # the first n packages
233 packages := $(wordlist 1,$(words $(stage1iter)),$(ALL))
235 package := $(word $(words $(packages)),$(packages))
236 # the n-1 first packages
237 stage1iter_1 := $(wordlist 2,$(words $(stage1iter)),$(stage1iter))
238 previous := $(wordlist 1,$(words $(stage1iter_1)),$(ALL))
239 previousmks := $(foreach package,$(previous),MAKE/$(package).mk)
240 include $(previousmks)
243 @echo "========== stage1iter : $(package)"
244 # @echo "stage1iter : included .mk files : $(previousmks)"
245 all: $($(package).specpath)
246 all: MAKE/$(package).mk
252 @echo "========== stage1"
255 # specs and makes are done sequentially by stage1iter
258 arg=""; for n in $(ALL) ; do arg="$$arg x"; $(MAKE) --no-print-directory stage1iter="$$arg"; done
261 ### once .mks are OK, you can run make normally
268 # mention $(ALL) here rather than rpms
269 # this is because the inter-package dependencies are expressed like
270 # util-vserver: util-python
276 ### yumgroups.xml : compute from all known .pkgs files
279 ./yumgroups.sh $(PLDISTRO) > $@
281 createrepo = createrepo --quiet -g yumgroups.xml RPMS/
283 repo: RPMS/yumgroups.xml
290 # * we always use the first module's location (SVNPATH/GITPATH) to extract the spec file
291 # * no matter what SCM is used, SPEC should hold a relative path from the module's root
293 define stage1_package_vars
294 $(1).module := $(firstword $($(1)-MODULES))
295 $(1).specpath := SPECS/$(notdir $($(1)-SPEC))
296 $(1).moduledir := MODULES/$$($(1).module)
297 $(1).codespec := MODULES/$$($(1).module)/$($(1)-SPEC)
298 $(1).spec2makeflags := $(if $($(1)-WHITELIST-RPMS),--whitelist-rpms $($(1)-WHITELIST-RPMS),)
301 $(foreach package, $(ALL), $(eval $(call stage1_package_vars,$(package))))
303 # compute all modules
304 ALL.modules := build tests
305 $(foreach package,$(ALL), $(eval ALL.modules+=$($(package)-MODULES)))
306 ALL.modules:=$(sort $(ALL.modules))
308 # extract revision from -SVNPATH or tag from -GITPATH
309 define stage1_module_vars
310 ifneq "$($(1)-SVNPATH)" ""
311 $(1)-SVNPATH := $(strip $($(1)-SVNPATH))
312 $(1)-SCMPATH := $(strip $($(1)-SVNPATH))
314 $(1)-GITPATH := $$(strip $$($(1)-GITPATH))
315 $(1)-SCMPATH := $$(strip $$($(1)-GITPATH))
316 $(1).gitrepo := $$(firstword $$(subst @, ,$$($(1)-GITPATH)))
317 $(1).gittag := $$(word 2,$$(subst @, ,$$($(1)-GITPATH)))
318 $(1).gittag := $$(if $$($(1).gittag),$$($(1).gittag),master)
322 $(foreach module,$(ALL.modules), $(eval $(call stage1_module_vars,$(module))))
325 # for each package, compute whether we need to set date
326 # the heuristic is that we mention the date as part of the rpm release flag if
327 # (*) the package has requested it by setting package-RPMDATE (container packages should do that)
328 # (*) or SVNPATH contains 'trunk' or 'branches'
329 # (*) or GITPATH has no '@' (trunk)
330 # (*) or GITPATH contains a '@', and the gittag part has no '-' (this is to tell a tag from a branch..)
332 define package_hasdate
333 $(1).has-date = $(if $($(1)-RPMDATE),yes, \
334 $(if $($($(1).module)-SVNPATH), \
335 $(if $(findstring /trunk,$($($(1).module)-SVNPATH)),yes, \
336 $(if $(findstring /branches,$($($(1).module)-SVNPATH)),yes,)), \
337 $(if $(not $($($(1).module).gittag)), yes,\
338 $(if $(findstring -,$($($(1).module).gittag)),,yes))))
341 $(foreach package, $(ALL), $(eval $(call package_hasdate,$(package))))
343 ### the common header for generated specfiles
344 # useful when trying new specfiles manually
346 (echo -n "# Generated by planetlab build from $($(1)-SPEC) on " ; date) > $@
347 echo "%define distro $(DISTRO)" >> $@
348 echo "%define distrorelease $(RELEASE)" >> $@
349 echo "%define distroname $(DISTRONAME)" >> $@
350 echo "%define pldistro $(PLDISTRO)" >> $@
351 echo "%define plrelease $(PLANETLAB_RELEASE)" >> $@
352 echo "# use MD5 and gzip for binary and source files" >> $@
353 echo "%global _binary_filedigest_algorithm 1" >> $@
354 echo "%global _source_filedigest_algorithm 1" >> $@
355 echo "%global _source_payload w9.gzdio" >> $@
356 echo "%global _binary_payload w9.gzdio" >> $@
358 ### make up spec file - extract module first
360 $($(1).specpath): header.spec $($(1).codespec)
362 cat header.spec > $($(1).specpath)
363 echo "%define SCMURL $($($(1).module)-SCMPATH)" >> $($(1).specpath)
364 $(if $($(1).has-date),echo "%define date $(shell date +%Y.%m.%d)" >> $($(1).specpath),)
365 $(if $($(1)-SPECVARS), \
366 $(foreach line,$($(1)-SPECVARS), \
367 echo "%define" $(word 1,$(subst =, ,$(line))) "$(word 2,$(subst =, ,$(line)))" >> $($(1).specpath) ;))
368 echo "# included from $($(1)-SPEC)" >> $($(1).specpath)
369 cat $($(1).codespec) >> $($(1).specpath)
371 $($(1).codespec): $($(1).moduledir)
375 $(foreach package,$(ALL),$(eval $(call target_spec,$(package))))
377 ### module extraction
378 define target_extract_module
380 @(echo -n "XXXXXXXXXXXXXXX -- BEG MODULE $(1) : $@ " ; date)
383 $(if $($(1)-SVNPATH),\
384 svn export $($(1)-SVNPATH) $(1),\
385 mkdir $(1) ; (git archive --remote=$($(1).gitrepo) $($(1).gittag) | tar -C $(1) -xf - ) \
386 || { rm -rf $(1); false; } )
387 @(echo -n "XXXXXXXXXXXXXXX -- END MODULE $(1) : $@ " ; date)
389 $(1)-module: MODULES/$(1)
393 $(foreach module,$(ALL.modules),$(eval $(call target_extract_module,$(module))))
396 # use this makefile to extract tests rather than extracting manually in vbuild-nightly
402 # Base rpmbuild in the current directory
403 # issues on fedora 8 : see the following posts
404 # http://forums.fedoraforum.org/showthread.php?t=39625 - and more specifically post#6
405 # https://www.redhat.com/archives/fedora-devel-list/2007-November/msg00171.html
407 FAKEROOT=/longbuildroot
408 PWD=$(shell /bin/pwd)
409 ifeq "$(PWD)" "$(REALROOT)"
410 export HOME := $(FAKEROOT)
412 export HOME := $(PWD)
415 ifeq "$(shell pwd)" "/build"
416 rm -f $(FAKEROOT) ; ln -s $(REALROOT) $(FAKEROOT)
419 echo "%_topdir $(HOME)" >> $@
420 echo "%_tmppath $(HOME)/tmp" >> $@
421 echo "%__spec_install_pre %{___build_pre}" >> $@
422 ./getrpmmacros.sh >> $@
424 ### this utility allows to extract various info from a spec file
425 ### and to define them in makefiles
426 spec2make: spec2make.c
427 $(CC) -g -Wall $< -o $@ -lrpm -lrpmbuild -lrpmio -lpopt
429 ### run spec2make on the spec file and include the result
430 # usage: spec2make package
431 # with old rpms (f8&c5) and too recent specfiles (the kernel), we need a patch to spec2make
432 # so when <package-NEEDSPECK2MAKEHACK is set, we run spec2make with the --hack flag
434 MAKE/$(1).mk: $($(1).specpath) spec2make .rpmmacros
436 ./spec2make $($(1).spec2makeflags) $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk || { rm MAKE/$(1).mk; exit 1; }
439 $(foreach package,$(ALL),$(eval $(call target_mk,$(package))))
441 # stores PLDISTRO in a file
442 # this is done at stage1. later run wont get confused
443 SAVED_VARS=PLDISTRO PLDISTROTAGS build-SVNPATH PERSONALITY MAILTO BASE WEBPATH TESTBUILDURL WEBROOT
445 @echo "# do not edit" > $@
446 @$(foreach var,$(SAVED_VARS),echo "$(var):=$($(var))" >> $@ ;)
447 @echo "# do not edit" > aliases
448 @echo -n "alias m=\"make " >> aliases
449 @$(foreach var,$(SAVED_VARS),echo -n " $(var)=$($(var))" >> aliases ;)
450 @echo "\"" >> aliases
451 @echo "alias m1=\"m stage1=true\"" >> aliases
453 savedpldistro: savedpldistro.mk
454 .PHONY: savedpldistro
456 # always refresh this
459 #################### regular make
461 define stage2_variables
462 ### devel dependencies
463 $(1).rpmbuild = $(RPMBUILD) $($(1)-RPMFLAGS)
464 $(1).all-devel-rpm-paths := $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).rpm-path))
465 $(1).depend-devel-packages := $(sort $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).package)))
466 ALL-DEVEL-RPMS += $($(1)-DEPEND-DEVEL-RPMS)
469 $(foreach package,$(ALL),$(eval $(call stage2_variables,$(package))))
470 ALL-DEVEL-RPMS := $(sort $(ALL-DEVEL-RPMS))
473 ### pack sources into tarballs
474 ALLTARBALLS:= $(foreach package, $(ALL), $($(package).tarballs))
475 tarballs: $(ALLTARBALLS)
476 @echo $(words $(ALLTARBALLS)) source tarballs OK
479 SOURCES/%.tar.bz2: SOURCES/%
480 tar chpjf $@ -C SOURCES $*
482 SOURCES/%.tar.gz: SOURCES/%
483 tar chpzf $@ -C SOURCES $*
485 SOURCES/%.tgz: SOURCES/%
486 tar chpzf $@ -C SOURCES $*
489 URLS/%: url=$(subst @colon@,:,$(subst @slash@,/,$(notdir $@)))
490 URLS/%: basename=$(notdir $(url))
492 echo curl $(url) -o SOURCES/$(basename)
495 ### the directory SOURCES/<package>-<version> is made
496 # with a (set of) copy -rl from MODULES/<module>
497 # the former is $(package.source)
498 ALLSOURCES:=$(foreach package, $(ALL), $($(package).source))
499 # so that make does not use the rule below directly for creating the tarball files
500 .SECONDARY: $(ALLSOURCES)
502 sources: $(ALLSOURCES)
503 @echo $(words $(ALLSOURCES)) versioned source trees OK
506 # argument is a package
507 # do things differently if multiple modules are mentioned (sigh..)
508 define target_copy_link_modules_sources
509 $($(1).source): $(foreach module,$($(1)-MODULES),MODULES/$(module))
510 $(if $(word 2,$($(1)-MODULES)),\
511 mkdir -p $($(1).source) && $(foreach module,$($(1)-MODULES), cp -rl MODULES/$(module) $($(1).source)/$(module);) ,\
512 mkdir -p SOURCES && cp -rl MODULES/$($(1)-MODULES) $($(1).source))
515 $(foreach package,$(ALL),$(eval $(call target_copy_link_modules_sources,$(package))))
518 ALLMODULES:=$(foreach module, $(ALL.modules), MODULES/$(module))
519 .SECONDARY: $(ALLMODULES)
520 modules: $(ALLMODULES)
521 @echo $(words $(ALLMODULES)) modules OK "(fetched from scm)"
525 ALLSRPMS:=$(foreach package,$(ALL),$($(package).srpm))
527 @echo $(words $(ALLSRPMS)) source rpms OK
531 # install the DEVEL-RPMS rpms if defined
532 define handle_stock_devel_rpms_pre
533 $(if $($(1)-DEVEL-RPMS), echo "Installing for $(1)-DEVEL-RPMS" ; $(YUM-INSTALL-DEVEL) $($(1)-DEVEL-RPMS))
536 ### these macro handles the DEPEND-DEVEL-RPMS and EXCLUDE-DEVEL-RPMS tags for a hiven package
537 # before building : rpm-install DEPEND-DEVEL-RPMS and rpm-uninstall EXCLUDE
538 define handle_local_devel_rpms_pre
539 $(if $($(1).all-devel-rpm-paths), echo "Installing for $(1)-DEPEND-DEVEL-RPMS" ; $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
540 $(if $($(1)-EXCLUDE-DEVEL-RPMS), echo "Uninstalling for $(1)-EXCLUDE-DEVEL-RPMS" ; $(RPM-UNINSTALL-DEVEL) $($(1)-EXCLUDE-DEVEL-RPMS))
543 define handle_local_devel_rpms_post
544 -$(if $($(1)-DEPEND-DEVEL-RPMS), echo "Unstalling for $(1)-DEPEND-DEVEL-RPMS" ; $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
545 $(if $($(1)-EXCLUDE-DEVEL-RPMS), "Reinstalling for $(1)-EXCLUDE-DEVEL-RPMS" ; $(YUM-INSTALL-DEVEL) $($(1)-EXCLUDE-DEVEL-RPMS) )
548 # usage: target_source_rpm package
549 define target_source_rpm
550 ifeq "$($(1)-BUILD-FROM-SRPM)" ""
551 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).tarballs)
552 mkdir -p BUILD SRPMS tmp
553 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using SOURCES) " ; date)
554 $(call handle_stock_devel_rpms_pre,$(1))
555 $(call handle_local_devel_rpms_pre,$(1))
556 $($(1).rpmbuild) -bs $($(1).specpath)
557 $(call handle_local_devel_rpms_post,$(1))
558 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
560 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).source)
561 mkdir -p BUILD SRPMS tmp
562 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using make srpm) " ; date)
563 $(call handle_stock_devel_rpms_pre,$(1))
564 $(call handle_local_devel_rpms_pre,$(1))
565 make -C $($(1).source) srpm SPECFILE=$(HOME)/$($(1).specpath) EXPECTED_SRPM=$(notdir $($(1).srpm)) && \
566 rm -f SRPMS/$(notdir $($(1).srpm)) && \
567 ln $($(1).source)/$(notdir $($(1).srpm)) SRPMS/$(notdir $($(1).srpm))
568 $(call handle_local_devel_rpms_post,$(1))
569 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
573 $(foreach package,$(ALL),$(eval $(call target_source_rpm,$(package))))
575 ### binary rpms are made from source rpm
576 ALLRPMS:=$(foreach package,$(ALL),$($(package).rpms))
577 # same as above, mention $(ALL) and not $(ALLRPMS)
579 @echo $(words $(ALLRPMS)) binary rpms OK
582 # use tmp dirs when building binary rpm so make remains idempotent
583 # otherwise SOURCES/ or SPEC gets touched again - which leads to rebuilding
584 RPM-USE-TMP-DIRS = --define "_sourcedir $(HOME)/tmp" --define "_specdir $(HOME)/tmp"
585 RPM-USE-COMPILE-DIRS = --define "_sourcedir $(HOME)/COMPILE" --define "_specdir $(HOME)/COMPILE"
587 # usage: build_binary_rpm package
588 # xxx hacky - invoke createrepo if DEPEND-FILES mentions RPMS/yumgroups.xml
589 define target_binary_rpm
590 $($(1).rpms): $($(1).srpm)
592 @(echo -n "XXXXXXXXXXXXXXX -- BEG RPM $(1) " ; date)
593 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
594 $(call handle_stock_devel_rpms_pre,$(1))
595 $(call handle_local_devel_rpms_pre,$(1))
596 $($(1).rpmbuild) --rebuild $(RPM-USE-TMP-DIRS) $($(1).srpm)
597 $(call handle_local_devel_rpms_post,$(1))
598 @(echo -n "XXXXXXXXXXXXXXX -- END RPM $(1) " ; date)
599 # for manual use only - in case we need to investigate the results of an rpmbuild
600 $(1)-compile: $($(1).srpm)
602 @(echo -n "XXXXXXXXXXXXXXX -- BEG compile $(1) " ; date)
603 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
604 $(call handle_stock_devel_rpms_pre,$(1))
605 $(call handle_local_devel_rpms_pre,$(1))
606 $($(1).rpmbuild) --recompile $(RPM-USE-TMP-DIRS) $($(1).srpm)
607 $(call handle_local_devel_rpms_post,$(1))
608 @(echo -n "XXXXXXXXXXXXXXX -- END compile $(1) " ; date)
612 $(foreach package,$(ALL),$(eval $(call target_binary_rpm,$(package))))
614 # e.g. make proper -> does propers rpms
615 # usage shorthand_target package
616 define target_shorthand
619 $(1)-spec: $($(1)-SPEC)
623 $(1)-tarball: $($(1).tarballs)
626 $(1)-source: $($(1).source)
627 $(1)-rpms: $($(1).rpms)
629 $(1)-srpm: $($(1).srpm)
633 $(foreach package,$(ALL),$(eval $(call target_shorthand,$(package))))
635 ### file dependencies
636 define package_depends_on_file
641 define target_dependfiles
642 $(foreach file,$($(1)-DEPEND-FILES),$(eval $(call package_depends_on_file,$(1),$(file))))
645 $(foreach package,$(ALL),$(eval $(call target_dependfiles,$(package))))
647 ### package dependencies
648 define package_depends_on_package
651 $($(1).srpm):$($(2).rpms)
654 define target_depends
655 $(foreach package,$($(1)-DEPEND-PACKAGES) $($(1).depend-devel-packages),$(eval $(call package_depends_on_package,$(1),$(package))))
658 $(foreach package,$(ALL),$(eval $(call target_depends,$(package))))
661 # usage: target_clean package
664 $(foreach module,$($(1)-MODULES),rm -rf MODULES/$(module);)
665 .PHONY: $(1)-clean-modules
666 CLEANS += $(1)-clean-modules
668 rm -rf $($(1).source)
669 .PHONY: $(1)-clean-source
670 CLEANS += $(1)-clean-source
672 rm -rf $($(1).tarballs)
673 .PHONY: $(1)-clean-tarball
674 CLEANS += $(1)-clean-tarball
676 rm -rf BUILD/$(notdir $($(1).source))
677 CLEANS += $(1)-clean-build
680 .PHONY: $(1)-clean-rpms
681 CLEANS += $(1)-clean-rpms
684 .PHONY: $(1)-clean-srpm
685 CLEANS += $(1)-clean-srpm
686 $(1)-codeclean: $(1)-clean-source $(1)-clean-tarball $(1)-clean-build $(1)-clean-rpms $(1)-clean-srpm
687 $(1)-clean: $(1)-clean-modules $(1)-codeclean
688 .PHONY: $(1)-codeclean $(1)-clean
690 rm -rf $($(1).specpath)
691 .PHONY: $(1)-clean-spec
694 .PHONY: $(1)-clean-make
695 $(1)-distclean: $(1)-distclean1 $(1)-distclean2
696 $(1)-distclean1: $(1)-clean-spec $(1)-clean-make
697 $(1)-distclean2: $(1)-clean
698 .PHONY: $(1)-distclean $(1)-distclean1 $(1)-distclean2
701 $(foreach package,$(ALL),$(eval $(call target_clean,$(package))))
709 @echo Available clean targets
712 ### brute force clean
714 rm -rf savedpldistro.mk .rpmmacros spec2make header.spec SPECS MAKE $(DISTCLEANS)
716 rm -rf MODULES SOURCES BUILD BUILDROOT RPMS SRPMS tmp
717 distclean: distclean1 distclean2
718 .PHONY: distclean1 distclean2 distclean
721 -$(RPM-UNINSTALL-DEVEL) $(ALL-DEVEL-RPMS)
724 # gather build information for the 'About' page
725 # when run from crontab, INIT_CWD not properly set (says /root ..)
726 # so, the nightly build passes BASE here
727 # also store BASE in .base for any post-processing purposes
729 @echo 'Creating myplc-release'
731 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx build info" >> $@
732 $(MAKE) --no-print-directory version-build >> $@
733 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx svn info" >> $@
734 $(MAKE) --no-print-directory version-tags >> $@
735 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx rpm info" >> $@
736 $(MAKE) --no-print-directory version-rpms >> $@
737 @echo $(BASE) > .base
740 @echo -n 'Build build-date: ' ; date '+%Y.%m.%d'
741 @echo -n 'Build build-time: ' ; date '+%H:%M-%Z'
742 @echo -n 'Build build-hostname: ' ; hostname
743 @echo "Build build-base: $(BASE)"
744 @echo "Build planetlab-distro: $(PLDISTRO)"
745 @echo "Build planetlab-tags: $(PLDISTROTAGS)"
746 @echo "Build target-arch: $(HOSTARCH)"
747 @echo "Build target-distro: $(DISTRO)"
748 @echo "Build target-distroname: $(DISTRONAME)"
749 @echo "Build target-release: $(RELEASE)"
750 @echo "Build target-personality: $(PERSONALITY)"
754 VFORMAT="%30s := %s\n"
755 define print_tag_target
757 @$(if $($(1)-SVNPATH),\
758 printf $(VFORMAT) $(1)-SVNPATH "$($(1)-SVNPATH)",\
759 printf $(VFORMAT) $(1)-GITPATH "$($(1)-GITPATH)" )
762 $(foreach module,$(ALL.modules), $(eval $(call print_tag_target,$(module))))
764 version-tags: $(foreach module, $(ALL.modules), $(module)-version-tag)
766 RFORMAT="%20s :: version=%s release=%s\n"
767 define rpm_version_target
769 @printf $(RFORMAT) $($(1).rpm-name) $($(1).rpm-version) $($(1).rpm-release)
770 version-rpms: $(1)-version-rpm
773 $(foreach package,$(sort $(ALL)), $(eval $(call rpm_version_target,$(package))))
775 versions: myplc-release version-build version-tags version-rpms
776 .PHONY: versions version-build version-rpms version-tags
778 #################### package info
779 PKGKEYS := tarballs source srpm rpms rpmnames rpm-release rpm-name rpm-version rpm-subversion
780 %-pkginfo: package=$(subst -pkginfo,,$@)
782 @$(foreach key,$(PKGKEYS),echo "$(package).$(key)=$($(package).$(key))";)
784 RPMKEYS := rpm-path package
785 %-rpminfo: rpm=$(subst -rpminfo,,$@)
787 @$(foreach key,$(RPMKEYS),echo "$(rpm).$(key)=$($(rpm).$(key))";)
789 #################### various lists - designed to run with stage1=true
791 @$(foreach package,$(ALL), echo package=$(package) ref_module=$($(package).module) modules=$($(package)-MODULES) rpmnames=$($(package).rpmnames); )
794 @$(foreach module,$(ALL.modules), echo module=$(module) \
795 $(if $($(module)-SVNPATH),svnpath=$($(module)-SVNPATH),gitpath=$($(module)-GITPATH)) ; )
798 @$(foreach module,$(ALL.modules), \
799 $(if $($(module)-BRANCH),echo module=$(module) branch=$($(module)-BRANCH);))
802 @$(foreach module,$(ALL.modules), \
803 $(if $($(module)-GITPATH), \
804 $(if $($(module)-BRANCH), \
805 echo $(module):$($(module)-BRANCH); , \
807 $(if $($(module)-BRANCH), \
808 echo $(module):$($(module)-BRANCH); , \
811 info: info-packages info-modules info-branches
813 .PHONY: info info-packages info-modules info-branches module-tools
816 @$(foreach package,$(ALL),$(if $(subst x1,,x$(words $($(package)-MODULES))), echo p=$(package) mods=$($(package)-MODULES) ;))
817 .PHONY: show-multi-modules
820 @echo "********** Run make in two stages:"
822 @echo "make stage1=true PLDISTRO=onelab"
823 @echo " -> extracts all spec files in SPECS/ and mk files in MAKE/"
824 @echo " as well as save PLDISTRO for subsequent runs"
826 @echo "********** Then you can use the following targets"
828 @echo " rebuilds everything"
829 @echo 'make util-vserver'
830 @echo " makes the RPMS related to util-vserver"
831 @echo " equivalent to 'make util-vserver-rpms'"
833 @echo "********** Or, vertically - step-by-step for a given package"
834 @echo 'make util-vserver-source'
835 @echo " creates source link in SOURCES/util-vserver-<version>"
836 @echo 'make util-vserver-tarball'
837 @echo " creates source tarball in SOURCES/util-vserver-<version>.<tarextension>"
838 @echo 'make util-vserver-srpm'
839 @echo " build source rpm in SRPMS/"
840 @echo 'make util-vserver-rpms'
841 @echo " build rpm(s) in RPMS/"
843 @echo "********** Or, horizontally, reach a step for all known packages"
845 @echo 'make tarballs'
849 @echo "********** Manual targets"
850 @echo "make package-compile"
851 @echo " The regular process uses rpmbuild --rebuild, that performs"
852 @echo " a compilation directory cleanup upon completion. If you need to investigate"
853 @echo " the intermediate compilation directory, use the -compile targets"
854 @echo "********** Cleaning examples"
856 @echo " removes the files made by make"
857 @echo "make distclean"
858 @echo " brute-force cleaning, removes entire directories - requires a new stage1"
859 @echo "make develclean"
860 @echo " rpm-uninstalls all devel packages installed during build"
862 @echo "make iptables-distclean"
863 @echo " deep clean for a given package"
864 @echo "make iptables-codeclean"
865 @echo " run this if you've made a local/manual change in the MODULES area for iptables"
867 @echo "make util-vserver-clean"
868 @echo " removes codebase, source, tarball, build, rpm and srpm for util-vserver"
869 @echo "make util-vserver-clean-modules"
870 @echo " and so on for source, tarball, build, rpm and srpm"
872 @echo "********** Info examples"
874 @echo " Displays the value of a given variable (here ALL)"
875 @echo " with only a single plus sign only the value is displayed"
877 @echo " is equivalent to make packages modules branches"
878 @echo " provides various info on these objects"
879 @echo "make ulogd-pkginfo"
880 @echo " Displays know attributes of a package"
881 @echo "make kernel-devel-rpminfo"
882 @echo " Displays know attributes of an rpm"
883 @echo "make stage1=true PLDISTROTAGS=planetlab-tags-4.2.mk packages modules branches module-tools"
884 @echo " Lists mentioned items - module-tools is used in modules.update"
886 @echo "********** Known pakages are"
889 #################### convenience, for debugging only
890 # make +foo : prints the value of $(foo)
891 # make ++foo : idem but verbose, i.e. foo=$(foo)
892 ++%: varname=$(subst +,,$@)
894 @echo "$(varname)=$($(varname))"
895 +%: varname=$(subst +,,$@)
897 @echo "$($(varname))"