2 # Thierry Parmentelat - INRIA Sophia Antipolis
10 # (*) make stage1=true
11 # this extracts all specfiles and computes .mk from specfiles
12 # you need to specify PLDISTRO here if relevant - see below
14 # for more info on how to invoke this stuff
16 #################### (fedora) distributions
18 # (*) as of nov. 2007, myplc-devel is deprecated
19 # (*) instead, we create a fresh vserver that holds required tools (see e.g. planetlab-devel.lst)
20 # (*) the build uses the current fedora version as a target for the produced images
21 # (*) so you simply need to create a fedora 8 build image for building fedora-8 images
23 #################### (planetlab) distributions
25 # (*) see README-pldistros.txt
26 # (*) then you need to run
27 # make stage1=true PLDISTRO=onelab
30 # This build deals with 3 kinds of objects
32 # (*) packages are named upon the RPM name; they are mostly lowercase
33 # Add a package to ALL if you want it built as part of the default set.
34 # (*) modules are named after the subversion tree; as of this writing their names
35 # are mostly mixed case like MyPLC or VserverReference
36 # (*) rpms are named in the spec files. A package typically defines several rpms;
37 # rpms are used for defining DEPEND-DEVEL-RPMS. See also package.rpmnames
39 #################### packages
40 # basics: how to build a package - you need/may define the following variables
43 # a package needs one or several modules to build.
46 # the package's specfile; this is relative to the FIRST module in package-MODULES
47 # see 'codebase' below
51 # (*) package-SPECVARS
52 # space-separated list of spec variable definitions, where you can reference make variable that relate to
53 # packages defined BEFORE the current one (note: you should use = - as opposed to := - to define these)
54 # e.g. mydriver-SPECVARS = foo=$(kernel-rpm-release)
55 # would let you use the %release from the kernel's package when rpmbuild'ing mydriver - see automatic below
56 # (*) package-DEPEND-PACKAGES
57 # a set of *packages* that this package depends on
58 # (*) package-DEPEND-DEVEL-RPMS
59 # a set of *rpms* that the build will rpm-install before building <package>
60 # the build will attempt to uninstall those once the package is built, this is not fatal though
61 # this is intended to denote local rpms, i.e. ones that are results of our own build
62 # stock rpms should be mentioned in config.planetlab/devel.pkgs
63 # (*) package-DEPEND-FILES
64 # a set of files that the package depends on - and that make needs to know about
65 # if this contains RPMS/yumgroups.xml, then the toplevel RPMS's index
66 # is refreshed with createrepo prior to running rpmbuild
67 # (*) package-EXCLUDE-DEVEL-RPMS
68 # a set of *rpms* that the build will rpm-uninstall before building <package>
69 # this is intended to denote stock rpms, and the build will attempt to yum-install them
70 # back after the package is rebuilt
71 # (*) package-RPMFLAGS: Miscellaneous RPM flags
72 # (*) package-RPMBUILD: If not rpmbuild - mostly used for sudo'ing rpmbuild
73 # (*) package-BUILD-FROM-SRPM: set this to any non-empty value, if your package is able to produce
74 # a source rpms by running 'make srpm'
75 # (*) package-RPMDATE: set this to any non-empty value to get the rpm package's release field hold the current date
76 # this is useful for container packages, like e.g. bootstrapfs or vserver, that contains much more than the
79 #################### modules
80 # Required information about the various modules (set this in e.g. planetlab-tags.mk)
83 # the complete path where this module lies;
84 # you can specify the trunk or a given tag with this variable
86 # OR if the module is managed under cvs (will be obsoleted)
91 #################### automatic variables
93 # the build defines some make variables that are extracted from spec files
95 # (*) $ make ulogd-pkginfo
96 # to see the list f variables attached to a given package
97 # (*) $ make kernel-devel-rpminfo
98 # to see the list of variables attached to a given rpm
102 # exported to spec files as plrelease
103 PLANETLAB_RELEASE = 5.0
108 # minimal compat with macos, just so this does not complain
109 HOSTARCH := $(shell uname -i 2> /dev/null || uname -m 2> /dev/null)
110 DISTRO := $(shell ./getdistro.sh)
111 RELEASE := $(shell ./getrelease.sh)
112 DISTRONAME := $(shell ./getdistroname.sh)
113 RPM-INSTALL-DEVEL := rpm --force -Uvh
114 # uninstall -- cannot force rpm -e
115 # need to ignore result, kernel-headers cannot be uninstalled as glibc depends on it
116 RPM-UNINSTALL-DEVEL := rpm -e
117 YUM-INSTALL-DEVEL := yum -y install
120 REMOTE-PLDISTROS="wextoolbox"
122 #################### Makefile
128 PLDISTRO := planetlab
130 export CVS_RSH := ssh
132 ########## savedpldistro.mk holds PLDISTRO - it is generated at stage1 (see below)
134 include savedpldistro.mk
137 # when re-running the nightly build after failure, we need to gather the former values
138 # do this by running make stage1=skip +PLDISTRO
139 ifeq "$(stage1)" "skip"
140 include savedpldistro.mk
143 #################### include onelab.mk
144 # describes the set of components
145 PLDISTROCONTENTS := $(PLDISTRO).mk
146 include $(PLDISTROCONTENTS)
148 #################### include <pldistro>-tags.mk
149 # describes where to fetch components, and the related tags if using cvs
150 ifeq "$(PLDISTROTAGS)" ""
151 PLDISTROTAGS := $(PLDISTRO)-tags.mk
153 include $(PLDISTROTAGS)
155 # this used to be set in the -tags.mk files, but that turned out to require
156 # error-prone duplicate changes
157 # so now the nightly build script sets this to what it is currently using
158 # we set a default in case we run the build manually:
159 # if the local directory was svn checked out, then use the corresponding URL
160 svn-info-url-line := $(shell svn info 2> /dev/null | grep URL:)
161 default-build-SVNPATH := $(lastword $(svn-info-url-line))
162 # otherwise, use this hard-coded default
163 ifeq "$(default-build-SVNPATH)" ""
164 default-build-SVNPATH := http://svn.planet-lab.org/svn/build/trunk
166 # use default if necessary
167 build-SVNPATH ?= $(default-build-SVNPATH)
170 define remote_pldistro
171 $(1).mk: config.$(1)/$(1).mk
172 @echo 'creating $(1) from config subdir'
173 cp config.$(1)/$(1).mk $(1).mk
175 $(2).mk: config.$(1)/$(2).mk
176 @echo 'creating $(1) tags from config subdir'
177 cp config.$(1)/$(2).mk $(2).mk
179 config.$(1)/$(1).mk: config.$(1)
180 config.$(1)/$(2).mk: config.$(1)
182 config.$(1): config.$(1).svnpath
183 @echo "Fetching details for pldistro $(1)"
184 svn export $(shell grep -v "^#" config.$(1).svnpath) config.$(1)
186 DISTCLEANS += $(1).mk $(2).mk config.$(1)
190 # somehow this does not work, handle manually instead
191 #$(foreach distro, $(REMOTE-PLDISTROS), $(eval $(call remote_pldistro,$(distro),$(distro)-tags)))
192 $(eval $(call remote_pldistro,wextoolbox,wextoolbox-tags))
194 ########## stage1 and stage1iter
195 # extract specs and compute .mk files by running
197 # entering stage1, we compute all the spec files
198 # then we use stage1iter to compute the .mk iteratively,
199 # ensuring that the n-1 first makefiles are loaded when creating the n-th one
200 # when stage1iter is set, it is supposed to be an index (starting at 1) in $(ALL)
202 ALLMKS := $(foreach package, $(ALL), MAKE/$(package).mk)
204 ### stage1iter : need some arithmetic, see
205 # http://www.cmcrossroads.com/articles/ask-mr.-make/learning-gnu-make-functions-with-arithmetic.html
206 ifneq "$(stage1iter)" ""
207 # the first n packages
208 packages := $(wordlist 1,$(words $(stage1iter)),$(ALL))
210 package := $(word $(words $(packages)),$(packages))
211 # the n-1 first packages
212 stage1iter_1 := $(wordlist 2,$(words $(stage1iter)),$(stage1iter))
213 previous := $(wordlist 1,$(words $(stage1iter_1)),$(ALL))
214 previousmks := $(foreach package,$(previous),MAKE/$(package).mk)
215 include $(previousmks)
218 @echo "========== stage1iter : $(package)"
219 # @echo "stage1iter : included .mk files : $(previousmks)"
220 all: $($(package).specpath)
221 all: MAKE/$(package).mk
227 @echo "========== stage1"
230 # specs and makes are done sequentially by stage1iter
233 arg=""; for n in $(ALL) ; do arg="$$arg x"; $(MAKE) --no-print-directory stage1iter="$$arg"; done
236 ### once .mks are OK, you can run make normally
243 # mention $(ALL) here rather than rpms
244 # this is because the inter-package dependencies are expressed like
245 # util-vserver: util-python
251 ### yumgroups.xml : compute from all known .pkgs files
254 ./yumgroups.sh $(PLDISTRO) > $@
256 createrepo = createrepo --quiet -g yumgroups.xml RPMS/
258 repo: RPMS/yumgroups.xml
265 # * to make configuration easier, we always use the first module's
266 # definitions (CVSROOT,TAG, or SVNPATH) to extract the spec file
267 # * for the same reason, in case cvs is used, the first module name is added to
268 # $(package)-SPEC - otherwise the cvs modules have to define spec as
269 # <module>/<module>.spec while svn modules just define it as <module>.spec
271 define stage1_package_vars
272 $(1).spec := $(notdir $($(1)-SPEC))
273 $(1).specpath := SPECS/$(1).spec
274 $(1).module := $(firstword $($(1)-MODULES))
277 $(foreach package, $(ALL), $(eval $(call stage1_package_vars,$(package))))
279 # compute all modules
281 $(foreach package,$(ALL), $(eval ALL-MODULES+=$($(package)-MODULES)))
282 ALL-MODULES:=$(sort $(ALL-MODULES))
284 # extract revision from -SVNPATH
285 define stage1_module_vars
286 $(1)-SVNPATH := $(strip $($(1)-SVNPATH))
287 $(1).svnpath := $(firstword $(subst @, ,$($(1)-SVNPATH)))
288 $(1).svnrev := $(word 2,$(subst @, @,$($(1)-SVNPATH)))
291 $(foreach module,$(ALL-MODULES), $(eval $(call stage1_module_vars,$(module))))
294 # for each package, compute whether we need to set date
295 # the heuristic is that we mention the date as part of the rpm release flag if
296 # (*) the package has requested it by setting package-RPMDATE (container packages should do that)
297 # (*) or SVNPATH contains 'trunk' or 'branches'
299 define package_hasdate
300 $(1).has-date = $(if $($(1)-RPMDATE),yes, \
301 $(if $($($(1).module)-SVNPATH), \
302 $(if $(findstring /trunk,$($($(1).module)-SVNPATH)),yes, \
303 $(if $(findstring /branches,$($($(1).module)-SVNPATH)),yes,)), \
304 $(if $(findstring HEAD,$($($(1).module)-TAG)),yes,)))
307 $(foreach package, $(ALL), $(eval $(call package_hasdate,$(package))))
309 ### the common header for generated specfiles
310 # useful when trying new specfiles manually
312 (echo -n "# Generated by planetlab build from $($(1)-SPEC) on " ; date) > $@
313 echo "%define distro $(DISTRO)" >> $@
314 echo "%define distrorelease $(RELEASE)" >> $@
315 echo "%define distroname $(DISTRONAME)" >> $@
316 echo "%define pldistro $(PLDISTRO)" >> $@
317 echo "%define plrelease $(PLANETLAB_RELEASE)" >> $@
318 echo "# use MD5 and gzip for binary and source files" << $@
319 echo "%global _binary_filedigest_algorithm 1" >> $@
320 echo "%global _source_filedigest_algorithm 1" >> $@
321 echo "%global _source_payload w9.gzdio" >> $@
322 echo "%global _binary_payload w9.gzdio" >> $@
324 ### extract spec file from scm
326 $($(1).specpath): header.spec
328 cat header.spec > $($(1).specpath)
329 $(if $($(1).has-date),echo "%define date $(shell date +%Y.%m.%d)" >> $($(1).specpath),)
330 $(if $($(1)-SPECVARS), \
331 $(foreach line,$($(1)-SPECVARS), \
332 echo "%define" $(word 1,$(subst =, ,$(line))) "$(word 2,$(subst =, ,$(line)))" >> $($(1).specpath) ;))
333 echo "# included from $($(1)-SPEC)" >> $($(1).specpath)
334 $(if $($($(1).module)-SVNPATH),\
335 svn cat $($($(1).module).svnpath)/$($(1)-SPEC)$($($(1).module).svnrev) >> $($(1).specpath) || rm $($(1).specpath),\
336 cvs -d $($($(1).module)-CVSROOT) checkout \
337 -r $($($(1).module)-TAG) \
338 -p $($(1).module)/$($(1)-SPEC) >> $($(1).specpath))
341 $(foreach package,$(ALL),$(eval $(call target_spec,$(package))))
344 # Base rpmbuild in the current directory
345 # issues on fedora 8 : see the following posts
346 # http://forums.fedoraforum.org/showthread.php?t=39625 - and more specifically post#6
347 # https://www.redhat.com/archives/fedora-devel-list/2007-November/msg00171.html
349 FAKEROOT=/longbuildroot
350 PWD=$(shell /bin/pwd)
351 ifeq "$(PWD)" "$(REALROOT)"
352 export HOME := $(FAKEROOT)
354 export HOME := $(PWD)
357 ifeq "$(shell pwd)" "/build"
358 rm -f $(FAKEROOT) ; ln -s $(REALROOT) $(FAKEROOT)
361 echo "%_topdir $(HOME)" >> $@
362 echo "%_tmppath $(HOME)/tmp" >> $@
363 echo "%__spec_install_pre %{___build_pre}" >> $@
364 ./getrpmmacros.sh >> $@
366 ### this utility allows to extract various info from a spec file
367 ### and to define them in makefiles
368 spec2make: spec2make.c
369 $(CC) -g -Wall $< -o $@ -lrpm -lrpmbuild
371 ### run spec2make on the spec file and include the result
372 # usage: spec2make package
374 MAKE/$(1).mk: $($(1).specpath) spec2make .rpmmacros
376 ./spec2make $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk || { rm MAKE/$(1).mk; exit 1; }
379 $(foreach package,$(ALL),$(eval $(call target_mk,$(package))))
381 # stores PLDISTRO in a file
382 # this is done at stage1. later run wont get confused
383 SAVED_VARS=PLDISTRO PLDISTROTAGS build-SVNPATH PERSONALITY MAILTO BASE WEBPATH TESTBUILDURL WEBROOT
385 @echo "# do not edit" > $@
386 @$(foreach var,$(SAVED_VARS),echo "$(var):=$($(var))" >> $@ ;)
387 @echo "# do not edit" > aliases
388 @echo -n "alias m=\"make " >> aliases
389 @$(foreach var,$(SAVED_VARS),echo -n " $(var)=$($(var))" >> aliases ;)
390 @echo "\"" >> aliases
391 @echo "alias m1=\"m stage1=true\"" >> aliases
393 savedpldistro: savedpldistro.mk
394 .PHONY: savedpldistro
396 # always refresh this
399 #################### regular make
401 define stage2_variables
402 ### devel dependencies
403 $(1).rpmbuild = $(if $($(1)-RPMBUILD),$($(1)-RPMBUILD),$(RPMBUILD)) $($(1)-RPMFLAGS)
404 $(1).all-devel-rpm-paths := $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).rpm-path))
405 $(1).depend-devel-packages := $(sort $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).package)))
406 ALL-DEVEL-RPMS += $($(1)-DEPEND-DEVEL-RPMS)
409 $(foreach package,$(ALL),$(eval $(call stage2_variables,$(package))))
410 ALL-DEVEL-RPMS := $(sort $(ALL-DEVEL-RPMS))
413 ### pack sources into tarballs
414 ALLTARBALLS:= $(foreach package, $(ALL), $($(package).tarballs))
415 tarballs: $(ALLTARBALLS)
416 @echo $(words $(ALLTARBALLS)) source tarballs OK
419 SOURCES/%.tar.bz2: SOURCES/%
420 tar chpjf $@ -C SOURCES $*
422 SOURCES/%.tar.gz: SOURCES/%
423 tar chpzf $@ -C SOURCES $*
425 SOURCES/%.tgz: SOURCES/%
426 tar chpzf $@ -C SOURCES $*
429 URLS/%: url=$(subst @colon@,:,$(subst @slash@,/,$(notdir $@)))
430 URLS/%: basename=$(notdir $(url))
432 echo curl $(url) -o SOURCES/$(basename)
435 ### the directory SOURCES/<package>-<version> is made
436 # with a copy -rl from CODEBASES/<package>
437 # the former is $(package.source) and the latter is $(package.codebase)
438 ALLSOURCES:=$(foreach package, $(ALL), $($(package).source))
439 # so that make does not use the rule below directly for creating the tarball files
440 .SECONDARY: $(ALLSOURCES)
442 sources: $(ALLSOURCES)
443 @echo $(words $(ALLSOURCES)) versioned source trees OK
446 define target_link_codebase_sources
447 $($(1).source): $($(1).codebase) ; mkdir -p SOURCES ; cp -rl $($(1).codebase) $($(1).source)
450 $(foreach package,$(ALL),$(eval $(call target_link_codebase_sources,$(package))))
452 ### codebase extraction
453 ALLCODEBASES:=$(foreach package, $(ALL), $($(package).codebase))
454 # so that make does not use the rule below directly for creating the tarball files
455 .SECONDARY: $(ALLCODEBASES)
457 codebases : $(ALLCODEBASES)
458 @echo $(words $(ALLCODEBASES)) codebase OK
462 # usage: extract_single_module package
463 define extract_single_module
465 $(if $($($(1).module)-SVNPATH), cd CODEBASES && svn export $($($(1).module)-SVNPATH) $(1), cd CODEBASES && cvs -d $($($(1).module)-CVSROOT) export -r $($($(1).module)-TAG) -d $(1) $($(1).module))
468 # usage: extract_multi_module package
469 define extract_multi_module
470 mkdir -p CODEBASES/$(1) && cd CODEBASES/$(1) && (\
471 $(foreach m,$($(1)-MODULES), $(if $($(m)-SVNPATH), svn export $($(m)-SVNPATH) $(m);, cvs -d $($(m)-CVSROOT) export -r $($(m)-TAG) $(m);)))
474 CODEBASES/%: package=$(notdir $@)
475 CODEBASES/%: multi_module=$(word 2,$($(package)-MODULES))
477 @(echo -n "XXXXXXXXXXXXXXX -- BEG CODEBASE $(package) : $@ " ; date)
478 $(if $(multi_module),\
479 $(call extract_multi_module,$(package)),\
480 $(call extract_single_module,$(package)))
481 @(echo -n "XXXXXXXXXXXXXXX -- END CODEBASE $(package) : $@ " ; date)
484 ALLSRPMS:=$(foreach package,$(ALL),$($(package).srpm))
486 @echo $(words $(ALLSRPMS)) source rpms OK
489 ### these macro handles the DEPEND-DEVEL-RPMS and EXCLUDE-DEVEL-RPMS tags for a hiven package
490 # before building : rpm-install DEPEND-DEVEL-RPMS and rpm-uninstall EXCLUDE
491 define handle_devel_rpms_pre
492 $(if $($(1).all-devel-rpm-paths), echo "Installing for $(1)-DEPEND-DEVEL-RPMS" ; $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
493 $(if $($(1)-EXCLUDE-DEVEL-RPMS), echo "Uninstalling for $(1)-EXCLUDE-DEVEL-RPMS" ; $(RPM-UNINSTALL-DEVEL) $($(1)-EXCLUDE-DEVEL-RPMS))
496 define handle_devel_rpms_post
497 -$(if $($(1)-DEPEND-DEVEL-RPMS), echo "Unstalling for $(1)-DEPEND-DEVEL-RPMS" ; $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
498 $(if $($(1)-EXCLUDE-DEVEL-RPMS), "Reinstalling for $(1)-EXCLUDE-DEVEL-RPMS" ; $(YUM-INSTALL-DEVEL) $($(1)-EXCLUDE-DEVEL-RPMS) )
501 # usage: target_source_rpm package
502 define target_source_rpm
503 ifeq "$($(1)-BUILD-FROM-SRPM)" ""
504 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).tarballs)
505 mkdir -p BUILD SRPMS tmp
506 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using SOURCES) " ; date)
507 $(call handle_devel_rpms_pre,$(1))
508 $($(1).rpmbuild) -bs $($(1).specpath)
509 $(call handle_devel_rpms_post,$(1))
510 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
512 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).codebase)
513 mkdir -p BUILD SRPMS tmp
514 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using make srpm) " ; date)
515 $(call handle_devel_rpms_pre,$(1))
516 make -C $($(1).codebase) srpm SPECFILE=$(HOME)/$($(1).specpath) EXPECTED_SRPM=$(notdir $($(1).srpm)) && \
517 rm -f SRPMS/$(notdir $($(1).srpm)) && \
518 ln $($(1).codebase)/$(notdir $($(1).srpm)) SRPMS/$(notdir $($(1).srpm))
519 $(call handle_devel_rpms_post,$(1))
520 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
524 $(foreach package,$(ALL),$(eval $(call target_source_rpm,$(package))))
526 ### binary rpms are made from source rpm
527 ALLRPMS:=$(foreach package,$(ALL),$($(package).rpms))
528 # same as above, mention $(ALL) and not $(ALLRPMS)
530 @echo $(words $(ALLRPMS)) binary rpms OK
533 # use tmp dirs when building binary rpm so make remains idempotent
534 # otherwise SOURCES/ or SPEC gets touched again - which leads to rebuilding
535 RPM-USE-TMP-DIRS = --define "_sourcedir $(HOME)/tmp" --define "_specdir $(HOME)/tmp"
536 RPM-USE-COMPILE-DIRS = --define "_sourcedir $(HOME)/COMPILE" --define "_specdir $(HOME)/COMPILE"
538 # usage: build_binary_rpm package
539 # xxx hacky - invoke createrepo if DEPEND-FILES mentions RPMS/yumgroups.xml
540 define target_binary_rpm
541 $($(1).rpms): $($(1).srpm)
543 @(echo -n "XXXXXXXXXXXXXXX -- BEG RPM $(1) " ; date)
544 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
545 $(call handle_devel_rpms_pre,$(1))
546 $($(1).rpmbuild) --rebuild $(RPM-USE-TMP-DIRS) $($(1).srpm)
547 $(call handle_devel_rpms_post,$(1))
548 @(echo -n "XXXXXXXXXXXXXXX -- END RPM $(1) " ; date)
549 # for manual use only - in case we need to investigate the results of an rpmbuild
550 $(1)-compile: $($(1).srpm)
552 @(echo -n "XXXXXXXXXXXXXXX -- BEG compile $(1) " ; date)
553 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
554 $(call handle_devel_rpms_pre,$(1))
555 $($(1).rpmbuild) --recompile $(RPM-USE-TMP-DIRS) $($(1).srpm)
556 $(call handle_devel_rpms_post,$(1))
557 @(echo -n "XXXXXXXXXXXXXXX -- END compile $(1) " ; date)
561 $(foreach package,$(ALL),$(eval $(call target_binary_rpm,$(package))))
563 # e.g. make proper -> does propers rpms
564 # usage shorthand_target package
565 define target_shorthand
568 $(1)-spec: $($(1)-SPEC)
572 $(1)-tarball: $($(1).tarballs)
574 $(1)-codebase: $($(1).codebase)
576 $(1)-source: $($(1).source)
577 .PHONY: $(1)-codebase
578 $(1)-rpms: $($(1).rpms)
580 $(1)-srpm: $($(1).srpm)
584 $(foreach package,$(ALL),$(eval $(call target_shorthand,$(package))))
586 ### file dependencies
587 define package_depends_on_file
592 define target_dependfiles
593 $(foreach file,$($(1)-DEPEND-FILES),$(eval $(call package_depends_on_file,$(1),$(file))))
596 $(foreach package,$(ALL),$(eval $(call target_dependfiles,$(package))))
598 ### package dependencies
599 define package_depends_on_package
602 $($(1).srpm):$($(2).rpms)
605 define target_depends
606 $(foreach package,$($(1)-DEPEND-PACKAGES) $($(1).depend-devel-packages),$(eval $(call package_depends_on_package,$(1),$(package))))
609 $(foreach package,$(ALL),$(eval $(call target_depends,$(package))))
612 # usage: target_clean package
615 rm -rf $($(1).codebase)
616 .PHONY: $(1)-clean-codebase
617 CLEANS += $(1)-clean-codebase
619 rm -rf $($(1).source)
620 .PHONY: $(1)-clean-source
621 CLEANS += $(1)-clean-source
623 rm -rf $($(1).tarballs)
624 .PHONY: $(1)-clean-tarball
625 CLEANS += $(1)-clean-tarball
627 rm -rf BUILD/$(notdir $($(1).source))
628 CLEANS += $(1)-clean-build
631 .PHONY: $(1)-clean-rpms
632 CLEANS += $(1)-clean-rpms
635 .PHONY: $(1)-clean-srpm
636 CLEANS += $(1)-clean-srpm
637 $(1)-codeclean: $(1)-clean-source $(1)-clean-tarball $(1)-clean-build $(1)-clean-rpms $(1)-clean-srpm
638 $(1)-clean: $(1)-clean-codebase $(1)-codeclean
639 .PHONY: $(1)-codeclean $(1)-clean
641 rm -rf $($(1).specpath)
642 .PHONY: $(1)-clean-spec
645 .PHONY: $(1)-clean-make
646 $(1)-distclean: $(1)-distclean1 $(1)-distclean2
647 $(1)-distclean1: $(1)-clean-spec $(1)-clean-make
648 $(1)-distclean2: $(1)-clean
649 .PHONY: $(1)-distclean $(1)-distclean1 $(1)-distclean2
652 $(foreach package,$(ALL),$(eval $(call target_clean,$(package))))
660 @echo Available clean targets
663 ### brute force clean
665 rm -rf savedpldistro.mk .rpmmacros spec2make header.spec SPECS MAKE $(DISTCLEANS)
667 rm -rf CODEBASES SOURCES BUILD BUILDROOT RPMS SRPMS tmp
668 distclean: distclean1 distclean2
669 .PHONY: distclean1 distclean2 distclean
672 -$(RPM-UNINSTALL-DEVEL) $(ALL-DEVEL-RPMS)
675 # gather build information for the 'About' page
676 # when run from crontab, INIT_CWD not properly set (says /root ..)
677 # so, the nightly build passes BASE here
678 # also store BASE in .base for any post-processing purposes
680 @echo 'Creating myplc-release'
682 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx build info" >> $@
683 $(MAKE) --no-print-directory version-build >> $@
684 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx svn info" >> $@
685 $(MAKE) --no-print-directory version-svns >> $@
686 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx rpm info" >> $@
687 $(MAKE) --no-print-directory version-rpms >> $@
688 @echo $(BASE) > .base
691 @echo -n 'Build build-date: ' ; date '+%Y.%m.%d'
692 @echo -n 'Build build-time: ' ; date '+%H:%M-%Z'
693 @echo -n 'Build build-hostname: ' ; hostname
694 @echo "Build build-base: $(BASE)"
695 @echo "Build planetlab-distro: $(PLDISTRO)"
696 @echo "Build planetlab-tags: $(PLDISTROTAGS)"
697 @echo -n 'Build planetlab-tagsid: ' ; fgrep '$$''Id' $(PLDISTROTAGS)
698 @echo "Build target-arch: $(HOSTARCH)"
699 @echo "Build target-distro: $(DISTRO)"
700 @echo "Build target-distroname: $(DISTRONAME)"
701 @echo "Build target-release: $(RELEASE)"
702 @echo "Build target-personality: $(PERSONALITY)"
706 VFORMAT="%30s := %s\n"
707 define svn_version_target
709 @$(if $($(1)-SVNPATH),\
710 printf $(VFORMAT) $(1)-SVNPATH "$($(1)-SVNPATH)",\
711 printf $(VFORMAT) $(1)-CVSROOT "$($(1)-CVSROOT)" ; printf $(VFORMAT) $(1)-TAG "$($(1)-TAG)")
714 $(foreach module,$(ALL-MODULES), $(eval $(call svn_version_target,$(module))))
716 version-svns: $(foreach module, $(ALL-MODULES), $(module)-version-svn)
718 RFORMAT="%20s :: version=%s release=%s\n"
719 define rpm_version_target
721 @printf $(RFORMAT) $($(1).rpm-name) $($(1).rpm-version) $($(1).rpm-release)
722 version-rpms: $(1)-version-rpm
725 $(foreach package,$(sort $(ALL)), $(eval $(call rpm_version_target,$(package))))
727 versions: myplc-release version-build version-svns version-rpms
728 .PHONY: versions version-build version-rpms version-svns
730 #################### package info
731 PKGKEYS := tarballs source codebase srpm rpms rpmnames rpm-release rpm-name rpm-version rpm-subversion
732 %-pkginfo: package=$(subst -pkginfo,,$@)
734 @$(foreach key,$(PKGKEYS),echo "$(package).$(key)=$($(package).$(key))";)
736 RPMKEYS := rpm-path package
737 %-rpminfo: rpm=$(subst -rpminfo,,$@)
739 @$(foreach key,$(RPMKEYS),echo "$(rpm).$(key)=$($(rpm).$(key))";)
741 #################### various lists - designed to run with stage1=true
743 @$(foreach package,$(ALL), echo package=$(package) ref_module=$($(package).module) modules=$($(package)-MODULES) rpmnames=$($(package).rpmnames); )
746 @$(foreach module,$(ALL-MODULES), echo module=$(module) svnpath=$($(module)-SVNPATH); )
749 @$(foreach module,$(ALL-MODULES), \
750 $(if $($(module)-SVNBRANCH),echo module=$(module) branch=$($(module)-SVNBRANCH);))
753 @$(foreach module,$(ALL-MODULES), \
754 $(if $($(module)-SVNPATH), \
755 $(if $($(module)-SVNBRANCH), \
756 echo $(module):$($(module)-SVNBRANCH); , \
759 info: packages modules branches
761 .PHONY: info packages modules branches module-tools
765 @$(if $(tests-SVNPATH), echo $(tests-SVNPATH) > $@, \
766 echo "http://svn.planet-lab.org/svn/tests/trunk" > $@)
771 @echo "********** Run make in two stages:"
773 @echo "make stage1=true PLDISTRO=onelab"
774 @echo " -> extracts all spec files in SPECS/ and mk files in MAKE/"
775 @echo " as well as save PLDISTRO for subsequent runs"
777 @echo "********** Then you can use the following targets"
779 @echo " rebuilds everything"
780 @echo 'make util-vserver'
781 @echo " makes the RPMS related to util-vserver"
782 @echo " equivalent to 'make util-vserver-rpms'"
784 @echo "********** Or, vertically - step-by-step for a given package"
785 @echo 'make util-vserver-codebase'
786 @echo " performs codebase extraction in CODEBASES/util-vserver"
787 @echo 'make util-vserver-source'
788 @echo " creates source link in SOURCES/util-vserver-<version>"
789 @echo 'make util-vserver-tarball'
790 @echo " creates source tarball in SOURCES/util-vserver-<version>.<tarextension>"
791 @echo 'make util-vserver-srpm'
792 @echo " build source rpm in SRPMS/"
793 @echo 'make util-vserver-rpms'
794 @echo " build rpm(s) in RPMS/"
796 @echo "********** Or, horizontally, reach a step for all known packages"
797 @echo 'make codebases'
799 @echo 'make tarballs'
803 @echo "********** Manual targets"
804 @echo "make package-compile"
805 @echo " The regular process uses rpmbuild --rebuild, that performs"
806 @echo " a compilation directory cleanup upon completion. If you need to investigate"
807 @echo " the intermediate compilation directory, use the -compile targets"
808 @echo "********** Cleaning examples"
810 @echo " removes the files made by make"
811 @echo "make distclean"
812 @echo " brute-force cleaning, removes entire directories - requires a new stage1"
813 @echo "make develclean"
814 @echo " rpm-uninstalls all devel packages installed during build"
816 @echo "make iptables-distclean"
817 @echo " deep clean for a given package"
818 @echo "make iptables-codeclean"
819 @echo " run this if you've made a change in the CODEBASES area for iptables"
821 @echo "make util-vserver-clean"
822 @echo " removes codebase, source, tarball, build, rpm and srpm for util-vserver"
823 @echo "make util-vserver-clean-codebase"
824 @echo " and so on for source, tarball, build, rpm and srpm"
826 @echo "********** Info examples"
828 @echo " Displays the value of a given variable (here ALL)"
829 @echo " with only a single plus sign only the value is displayed"
831 @echo " is equivalent to make packages modules branches"
832 @echo " provides various info on these objects"
833 @echo "make ulogd-pkginfo"
834 @echo " Displays know attributes of a package"
835 @echo "make kernel-devel-rpminfo"
836 @echo " Displays know attributes of an rpm"
837 @echo "make stage1=true PLDISTROTAGS=planetlab-tags-4.2.mk packages modules branches module-tools"
838 @echo " Lists mentioned items - module-tools is used in modules.update"
840 @echo "********** Known pakages are"
843 #################### convenience, for debugging only
844 # make +foo : prints the value of $(foo)
845 # make ++foo : idem but verbose, i.e. foo=$(foo)
846 ++%: varname=$(subst +,,$@)
848 @echo "$(varname)=$($(varname))"
849 +%: varname=$(subst +,,$@)
851 @echo "$($(varname))"