2 # Thierry Parmentelat - INRIA Sophia Antipolis
10 # this extracts all specfiles and computes .mk from specfiles
11 # you need to specify PLDISTRO here if relevant - see below
13 # for more info on how to invoke this stuff
15 #################### (fedora) distributions
17 # (*) as of nov. 2007, myplc-devel is deprecated
18 # (*) instead, we create a fresh vserver that holds required tools (see e.g. planetlab-devel.lst)
19 # (*) the build uses the current fedora version as a target for the produced images
20 # (*) so you simply need to create a fedora 8 build image for building fedora-8 images
22 #################### (planetlab) distributions
24 # (*) see README-pldistros.txt
25 # (*) then you need to run
26 # make stage1=true PLDISTRO=onelab
29 # This build deals with 3 kinds of objects
31 # (*) packages are named upon the RPM name; they are mostly lowercase
32 # Add a package to ALL if you want it built as part of the default set.
33 # (*) modules are named after the subversion tree; as of this writing their names
34 # are mostly mixed case like MyPLC or VserverReference
35 # (*) rpms are named in the spec files. A package typically defines several rpms;
36 # rpms are used for defining DEPEND-DEVEL-RPMS. See also package.rpmnames
38 #################### packages
39 # basics: how to build a package - you need/may define the following variables
42 # a package needs one or several modules to build.
45 # the package's specfile; this is relative to the FIRST module in package-MODULES
46 # see 'codebase' below
50 # (*) package-SPECVARS
51 # space-separated list of spec variable definitions, where you can reference make variable that relate to
52 # packages defined BEFORE the current one (note: you should use = - as opposed to := - to define these)
53 # e.g. mydriver-SPECVARS = foo=$(kernel-rpm-release)
54 # would let you use the %release from the kernel's package when rpmbuild'ing mydriver - see automatic below
55 # (*) package-DEPEND-PACKAGES
56 # a set of *packages* that this package depends on
57 # (*) package-DEPEND-DEVEL-RPMS
58 # a set of *rpms* that the build will rpm-install before building <package>
59 # (*) package-DEPEND-FILES
60 # a set of files that the package depends on - and that make needs to know about
61 # if this contains RPMS/yumgroups.xml, then the toplevel RPMS's index
62 # is refreshed with createrepo prior to running rpmbuild
63 # (*) package-RPMFLAGS: Miscellaneous RPM flags
64 # (*) package-RPMBUILD: If not rpmbuild - mostly used for sudo'ing rpmbuild
65 # (*) package-BUILD-FROM-SRPM: set this to any non-empty value, if your package is able to produce
66 # a source rpms by running 'make srpm'
68 #################### modules
69 # Required information about the various modules (set this in e.g. planetlab-tags.mk)
72 # the complete path where this module lies;
73 # you can specify the trunk or a given tag with this variable
75 # OR if the module is managed under cvs (will be obsoleted)
80 #################### automatic variables
82 # the build defines some make variables that are extracted from spec files
84 # (*) $ make ulogd-pkginfo
85 # to see the list f variables attached to a given package
86 # (*) $ make kernel-devel-rpminfo
87 # to see the list f variables attached to a given rpm
91 # exported to spec files as plrelease
92 PLANETLAB_RELEASE = 4.2
97 HOSTARCH := $(shell uname -i)
98 DISTRO := $(shell ./getdistro.sh)
99 RELEASE := $(shell ./getrelease.sh)
100 RPM-INSTALL-DEVEL := rpm --force -Uvh
101 # cannot force rpm -e
102 RPM-UNINSTALL-DEVEL := rpm -e
104 #################### Makefile
110 PLDISTRO := planetlab
112 export CVS_RSH := ssh
114 ########## pldistro.mk holds PLDISTRO - it is generated at stage1 (see below)
119 #################### include onelab.mk
120 # describes the set of components
121 PLDISTROCONTENTS := $(PLDISTRO).mk
122 include $(PLDISTROCONTENTS)
124 #################### include <pldistro>-tags.mk
125 # describes where to fetch components, and the related tags if using cvs
126 PLDISTROTAGS := $(PLDISTRO)-tags.mk
127 include $(PLDISTROTAGS)
129 ########## stage1 and stage1iter
130 # extract specs and compute .mk files by running
132 # entering stage1, we compute all the spec files
133 # then we use stage1iter to compute the .mk iteratively,
134 # ensuring that the n-1 first makefiles are loaded when creating the n-th one
135 # when stage1iter is set, it is supposed to be an index (starting at 1) in $(ALL)
137 ALLMKS := $(foreach package, $(ALL), MAKE/$(package).mk)
139 ### stage1iter : need some arithmetic, see
140 # http://www.cmcrossroads.com/articles/ask-mr.-make/learning-gnu-make-functions-with-arithmetic.html
141 ifneq "$(stage1iter)" ""
142 # the first n packages
143 packages := $(wordlist 1,$(words $(stage1iter)),$(ALL))
145 package := $(word $(words $(packages)),$(packages))
146 # the n-1 first packages
147 stage1iter_1 := $(wordlist 2,$(words $(stage1iter)),$(stage1iter))
148 previous := $(wordlist 1,$(words $(stage1iter_1)),$(ALL))
149 previousmks := $(foreach package,$(previous),MAKE/$(package).mk)
150 include $(previousmks)
153 @echo "========== stage1iter : $(package)"
154 # @echo "stage1iter : included .mk files : $(previousmks)"
155 all: $($(package).specpath)
156 all: MAKE/$(package).mk
162 @echo "========== stage1"
165 # specs and makes are done sequentially by stage1iter
168 arg=""; for n in $(ALL) ; do arg="$$arg x"; $(MAKE) --no-print-directory stage1iter="$$arg"; done
171 ### once .mks are OK, you can run make normally
178 # mention $(ALL) here rather than rpms
179 # this is because the inter-package dependencies are expressed like
180 # util-vserver: util-python
186 ### yumgroups.xml : compute from all known .pkgs files
189 ./yumgroups.sh $(PLDISTRO) > $@
191 createrepo = createrepo --quiet -g yumgroups.xml RPMS/
193 repo: RPMS/yumgroups.xml
200 # * to make configuration easier, we always use the first module's
201 # definitions (CVSROOT,TAG, or SVNPATH) to extract the spec file
202 # * for the same reason, in case cvs is used, the first module name is added to
203 # $(package)-SPEC - otherwise the cvs modules have to define spec as
204 # <module>/<module>.spec while svn modules just define it as <module>.spec
206 define stage1_variables
207 $(1).spec = $(notdir $($(1)-SPEC))
208 $(1).specpath = SPECS/$(1).spec
209 $(1).module = $(firstword $($(1)-MODULES))
212 $(foreach package, $(ALL), $(eval $(call stage1_variables,$(package))))
215 # for each package, compute whether we need to set date (i.e. whether we use the trunk)
216 # the myplc package is forced to have a date, because it is more convenient
217 # (we cannot bump its number everytime something changes in the system)
218 # myplc-native does not need this trick
220 define package_hasdate
221 $(1).has-date = $(if $(subst myplc,,$(1)), \
222 $(if $($($(1).module)-SVNPATH),\
223 $(if $(findstring /trunk,$($($(1).module)-SVNPATH)),yes,),\
224 $(if $(findstring HEAD,$($($(1).module)-TAG)),yes,)), \
228 $(foreach package, $(ALL), $(eval $(call package_hasdate,$(package))))
230 ### extract spec file from scm
234 (echo -n "# Generated by planetlab build from $($(1)-SPEC) on " ; date) > $($(1).specpath)
235 echo "%define distroname $(DISTRO)" >> $($(1).specpath)
236 echo "%define distrorelease $(RELEASE)" >> $($(1).specpath)
237 echo "%define pldistro $(PLDISTRO)" >> $($(1).specpath)
238 echo "%define plrelease $(PLANETLAB_RELEASE)" >> $($(1).specpath)
239 $(if $($(1).has-date),echo "%define date $(shell date +%Y.%m.%d)" >> $($(1).specpath),)
240 $(if $($(1)-SPECVARS), \
241 $(foreach line,$($(1)-SPECVARS), \
242 echo "%define" $(word 1,$(subst =, ,$(line))) "$(word 2,$(subst =, ,$(line)))" >> $($(1).specpath) ;))
243 echo "# included from codebase specfile" >> $($(1).specpath)
244 $(if $($($(1).module)-SVNPATH),\
245 svn cat $($($(1).module)-SVNPATH)/$($(1)-SPEC) >> $($(1).specpath) || rm $($(1).specpath),\
246 cvs -d $($($(1).module)-CVSROOT) checkout \
247 -r $($($(1).module)-TAG) \
248 -p $($(1).module)/$($(1)-SPEC) >> $($(1).specpath))
251 $(foreach package,$(ALL),$(eval $(call target_spec,$(package))))
254 # Base rpmbuild in the current directory
255 # issues on fedora 8 : see the following posts
256 # http://forums.fedoraforum.org/showthread.php?t=39625 - and more specifically post#6
257 # https://www.redhat.com/archives/fedora-devel-list/2007-November/msg00171.html
259 FAKEROOT=/longbuildroot
260 PWD=$(shell /bin/pwd)
261 ifeq "$(PWD)" "$(REALROOT)"
262 export HOME := $(FAKEROOT)
264 export HOME := $(PWD)
267 ifeq "$(shell pwd)" "/build"
268 rm -f $(FAKEROOT) ; ln -s $(REALROOT) $(FAKEROOT)
271 echo "%_topdir $(HOME)" >> $@
272 echo "%_tmppath $(HOME)/tmp" >> $@
273 ./getrpmmacros.sh >> $@
275 ### this utility allows to extract various info from a spec file
276 ### and to define them in makefiles
277 spec2make: spec2make.c
278 $(CC) -g -Wall $< -o $@ -lrpm -lrpmbuild
280 ### run spec2make on the spec file and include the result
281 # usage: spec2make package
283 MAKE/$(1).mk: $($(1).specpath) spec2make .rpmmacros
285 ./spec2make $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk
286 @if [ -z MAKE/$(1).mk ] ; then rm MAKE/$(1).mk ; exit 1 ; fi
289 $(foreach package,$(ALL),$(eval $(call target_mk,$(package))))
291 # stores PLDISTRO in a file
292 # this is done at stage1. later run wont get confused
294 echo "PLDISTRO:=$(PLDISTRO)" > $@
295 echo "PLDISTROTAGS:=$(PLDISTROTAGS)" >> $@
297 savepldistro: pldistro.mk
300 # always refresh this
303 #################### regular make
305 define stage2_variables
306 ### devel dependencies
307 $(1).rpmbuild = $(if $($(1)-RPMBUILD),$($(1)-RPMBUILD),$(RPMBUILD)) $($(1)-RPMFLAGS)
308 $(1).all-devel-rpm-paths := $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).rpm-path))
309 $(1).depend-devel-packages := $(sort $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).package)))
310 ALL-DEVEL-RPMS += $($(1)-DEPEND-DEVEL-RPMS)
313 $(foreach package,$(ALL),$(eval $(call stage2_variables,$(package))))
314 ALL-DEVEL-RPMS := $(sort $(ALL-DEVEL-RPMS))
317 ### pack sources into tarballs
318 ALLTARBALLS:= $(foreach package, $(ALL), $($(package).tarballs))
319 tarballs: $(ALLTARBALLS)
320 @echo $(words $(ALLTARBALLS)) source tarballs OK
323 SOURCES/%.tar.bz2: SOURCES/%
324 tar chpjf $@ -C SOURCES $*
326 SOURCES/%.tar.gz: SOURCES/%
327 tar chpzf $@ -C SOURCES $*
329 SOURCES/%.tgz: SOURCES/%
330 tar chpzf $@ -C SOURCES $*
333 URLS/%: url=$(subst @colon@,:,$(subst @slash@,/,$(notdir $@)))
334 URLS/%: basename=$(notdir $(url))
336 echo curl $(url) -o SOURCES/$(basename)
339 ### the directory SOURCES/<package>-<version> is made
340 # with a copy -rl from CODEBASES/<package>
341 # the former is $(package.source) and the latter is $(package.codebase)
342 ALLSOURCES:=$(foreach package, $(ALL), $($(package).source))
343 # so that make does not use the rule below directly for creating the tarball files
344 .SECONDARY: $(ALLSOURCES)
346 sources: $(ALLSOURCES)
347 @echo $(words $(ALLSOURCES)) versioned source trees OK
350 define target_link_codebase_sources
351 $($(1).source): $($(1).codebase) ; mkdir -p SOURCES ; cp -rl $($(1).codebase) $($(1).source)
354 $(foreach package,$(ALL),$(eval $(call target_link_codebase_sources,$(package))))
356 ### codebase extraction
357 ALLCODEBASES:=$(foreach package, $(ALL), $($(package).codebase))
358 # so that make does not use the rule below directly for creating the tarball files
359 .SECONDARY: $(ALLCODEBASES)
361 codebases : $(ALLCODEBASES)
362 @echo $(words $(ALLCODEBASES)) codebase OK
366 # usage: extract_single_module package
367 define extract_single_module
369 $(if $($($(1).module)-SVNPATH), cd CODEBASES && svn export $($($(1).module)-SVNPATH) $(1), cd CODEBASES && cvs -d $($($(1).module)-CVSROOT) export -r $($($(1).module)-TAG) -d $(1) $($(1).module))
372 # usage: extract_multi_module package
373 define extract_multi_module
374 mkdir -p CODEBASES/$(1) && cd CODEBASES/$(1) && (\
375 $(foreach m,$($(1)-MODULES), $(if $($(m)-SVNPATH), svn export $($(m)-SVNPATH) $(m);, cvs -d $($(m)-CVSROOT) export -r $($(m)-TAG) $(m);)))
378 CODEBASES/%: package=$(notdir $@)
379 CODEBASES/%: multi_module=$(word 2,$($(package)-MODULES))
381 @(echo -n "XXXXXXXXXXXXXXX -- BEG CODEBASE $(package) : $@ " ; date)
382 $(if $(multi_module),\
383 $(call extract_multi_module,$(package)),\
384 $(call extract_single_module,$(package)))
385 @(echo -n "XXXXXXXXXXXXXXX -- END CODEBASE $(package) : $@ " ; date)
388 ALLSRPMS:=$(foreach package,$(ALL),$($(package).srpm))
390 @echo $(words $(ALLSRPMS)) source rpms OK
393 # usage: target_source_rpm package
394 # select upon the package name, whether it contains srpm or not
395 define target_source_rpm
396 ifeq "$($(1)-BUILD-FROM-SRPM)" ""
397 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).tarballs)
398 mkdir -p BUILD SRPMS tmp
399 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using SOURCES) " ; date)
400 $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
401 $($(1).rpmbuild) -bs $($(1).specpath)
402 $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
403 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
405 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).codebase)
406 mkdir -p BUILD SRPMS tmp
407 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using make srpm) " ; date)
408 $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
409 make -C $($(1).codebase) srpm SPECFILE=$(HOME)/$($(1).specpath) && \
410 rm -f SRPMS/$(notdir $($(1).srpm)) && \
411 ln $($(1).codebase)/$(notdir $($(1).srpm)) SRPMS/$(notdir $($(1).srpm))
412 $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
413 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
417 $(foreach package,$(ALL),$(eval $(call target_source_rpm,$(package))))
419 ### binary rpms are made from source rpm
420 ALLRPMS:=$(foreach package,$(ALL),$($(package).rpms))
421 # same as above, mention $(ALL) and not $(ALLRPMS)
423 @echo $(words $(ALLRPMS)) binary rpms OK
426 # use tmp dirs when building binary rpm so make remains idempotent
427 # otherwise SOURCES/ or SPEC gets touched again - which leads to rebuilding
428 RPM-USE-TMP-DIRS = --define "_sourcedir $(HOME)/tmp" --define "_specdir $(HOME)/tmp"
429 RPM-USE-COMPILE-DIRS = --define "_sourcedir $(HOME)/COMPILE" --define "_specdir $(HOME)/COMPILE"
431 # usage: build_binary_rpm package
432 # xxx hacky - invoke createrepo if DEPEND-FILES mentions RPMS/yumgroups.xml
433 define target_binary_rpm
434 $($(1).rpms): $($(1).srpm)
436 @(echo -n "XXXXXXXXXXXXXXX -- BEG RPM $(1) " ; date)
437 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
438 $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
439 $($(1).rpmbuild) --rebuild $(RPM-USE-TMP-DIRS) $($(1).srpm)
440 $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
441 @(echo -n "XXXXXXXXXXXXXXX -- END RPM $(1) " ; date)
442 # for manual use only - in case we need to investigate the results of an rpmbuild
443 $(1)-compile: $($(1).srpm)
445 @(echo -n "XXXXXXXXXXXXXXX -- BEG compile $(1) " ; date)
446 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
447 $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
448 $($(1).rpmbuild) --recompile $(RPM-USE-TMP-DIRS) $($(1).srpm)
449 $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
450 @(echo -n "XXXXXXXXXXXXXXX -- END compile $(1) " ; date)
454 $(foreach package,$(ALL),$(eval $(call target_binary_rpm,$(package))))
456 # e.g. make proper -> does propers rpms
457 # usage shorthand_target package
458 define target_shorthand
461 $(1)-spec: $($(1)-SPEC)
465 $(1)-tarball: $($(1).tarballs)
467 $(1)-codebase: $($(1).codebase)
469 $(1)-source: $($(1).source)
470 .PHONY: $(1)-codebase
471 $(1)-rpms: $($(1).rpms)
473 $(1)-srpm: $($(1).srpm)
477 $(foreach package,$(ALL),$(eval $(call target_shorthand,$(package))))
479 ### file dependencies
480 define package_depends_on_file
485 define target_dependfiles
486 $(foreach file,$($(1)-DEPEND-FILES),$(eval $(call package_depends_on_file,$(1),$(file))))
489 $(foreach package,$(ALL),$(eval $(call target_dependfiles,$(package))))
491 ### package dependencies
492 define package_depends_on_package
495 $($(1).srpm):$($(2).rpms)
498 define target_depends
499 $(foreach package,$($(1)-DEPEND-PACKAGES) $($(1).depend-devel-packages),$(eval $(call package_depends_on_package,$(1),$(package))))
502 $(foreach package,$(ALL),$(eval $(call target_depends,$(package))))
505 # usage: target_clean package
508 rm -rf $($(1).codebase)
509 .PHONY: $(1)-clean-codebase
510 CLEANS += $(1)-clean-codebase
512 rm -rf $($(1).source)
513 .PHONY: $(1)-clean-source
514 CLEANS += $(1)-clean-source
516 rm -rf $($(1).tarballs)
517 .PHONY: $(1)-clean-tarball
518 CLEANS += $(1)-clean-tarball
520 rm -rf BUILD/$(notdir $($(1).source))
521 CLEANS += $(1)-clean-build
524 .PHONY: $(1)-clean-rpms
525 CLEANS += $(1)-clean-rpms
528 .PHONY: $(1)-clean-srpm
529 CLEANS += $(1)-clean-srpm
530 $(1)-codeclean: $(1)-clean-source $(1)-clean-tarball $(1)-clean-build $(1)-clean-rpms $(1)-clean-srpm
531 $(1)-clean: $(1)-clean-codebase $(1)-codeclean
532 .PHONY: $(1)-codeclean $(1)-clean
534 rm -rf $($(1).specpath)
535 .PHONY: $(1)-clean-spec
538 .PHONY: $(1)-clean-make
539 $(1)-distclean: $(1)-distclean1 $(1)-distclean2
540 $(1)-distclean1: $(1)-clean-spec $(1)-clean-make
541 $(1)-distclean2: $(1)-clean
542 .PHONY: $(1)-distclean $(1)-distclean1 $(1)-distclean2
545 $(foreach package,$(ALL),$(eval $(call target_clean,$(package))))
553 @echo Available clean targets
556 ### brute force clean
558 rm -rf pldistro.mk .rpmmacros spec2make SPECS MAKE
560 rm -rf CODEBASES SOURCES BUILD RPMS SRPMS tmp
561 distclean: distclean1 distclean2
562 .PHONY: distclean1 distclean2 distclean
565 $(RPM-UNINSTALL-DEVEL) $(ALL-DEVEL-RPMS)
568 # gather build information for the 'About' page
569 # when run from crontab, INIT_CWD not properly set (says /root ..)
570 # so, the nightly build passes NIGHTLY_BASE here
571 # also store the nightly_base in .base for any post-processing purposes
573 @echo 'Creating myplc-release'
575 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx build info" >> $@
576 $(MAKE) --no-print-directory version-build >> $@
577 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx svn info" >> $@
578 $(MAKE) --no-print-directory version-svns >> $@
579 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx rpm info" >> $@
580 $(MAKE) --no-print-directory version-rpms >> $@
581 @echo $(NIGHTLY_BASE) > .base
584 @echo -n 'Build build-date: ' ; date '+%Y.%m.%d'
585 @echo -n 'Build build-time: ' ; date '+%H:%M-%Z'
586 @echo -n 'Build build-hostname: ' ; hostname
587 @echo "Build build-base: $(NIGHTLY_BASE)"
588 @echo "Build planetab-distro: $(PLDISTRO)"
589 @echo "Build planetlab-tags: $(PLDISTROTAGS)"
590 @echo -n 'Build planetlab-tagsid: ' ; fgrep '$$''Id' $(PLDISTROTAGS)
591 @echo "Build target-arch: $(HOSTARCH)"
592 @echo "Build target-distro: $(DISTRO)"
593 @echo "Build target-release: $(RELEASE)"
594 @echo "Build target-personality: $(NIGHTLY_PERSONALITY)"
598 VFORMAT="%30s := %s\n"
599 define svn_version_target
601 @$(if $($(1)-SVNPATH),\
602 printf $(VFORMAT) $(1)-SVNPATH "$($(1)-SVNPATH)",\
603 printf $(VFORMAT) $(1)-CVSROOT "$($(1)-CVSROOT)" ; printf $(VFORMAT) $(1)-TAG "$($(1)-TAG)")
606 # compute all modules
608 $(foreach package,$(ALL), $(eval ALL-MODULES+=$($(package)-MODULES)))
609 ALL-MODULES:=$(sort $(ALL-MODULES))
611 $(foreach module,$(ALL-MODULES), $(eval $(call svn_version_target,$(module))))
613 version-svns: $(foreach module, $(ALL-MODULES), $(module)-version-svn)
615 RFORMAT="%20s :: version=%s release=%s\n"
616 define rpm_version_target
618 @printf $(RFORMAT) $($(1).rpm-name) $($(1).rpm-version) $($(1).rpm-release)
619 version-rpms: $(1)-version-rpm
622 $(foreach package,$(sort $(ALL)), $(eval $(call rpm_version_target,$(package))))
624 versions: myplc-release version-build version-svns version-rpms
625 .PHONY: versions version-build version-rpms version-svns
627 #################### include install Makefile
628 # the default is to use the distro-dependent install file
629 # however the main distro file can redefine PLDISTROINSTALL
630 ifndef PLDISTROINSTALL
631 PLDISTROINSTALL := $(PLDISTRO)-install.mk
634 -include $(PLDISTROINSTALL)
638 @echo "********** Run make in two stages:"
640 @echo "make stage1=true PLDISTRO=onelab"
641 @echo " -> extracts all spec files in SPECS/ and mk files in MAKE/"
642 @echo " as well as save PLDISTRO for subsequent runs"
644 @echo "********** Then you can use the following targets"
646 @echo " rebuilds everything"
647 @echo 'make util-vserver'
648 @echo " makes the RPMS related to util-vserver"
649 @echo " equivalent to 'make util-vserver-rpms'"
651 @echo "********** Or, vertically - step-by-step for a given package"
652 @echo 'make util-vserver-codebase'
653 @echo " performs codebase extraction in CODEBASES/util-vserver"
654 @echo 'make util-vserver-source'
655 @echo " creates source link in SOURCES/util-vserver-<version>"
656 @echo 'make util-vserver-tarball'
657 @echo " creates source tarball in SOURCES/util-vserver-<version>.<tarextension>"
658 @echo 'make util-vserver-srpm'
659 @echo " build source rpm in SRPMS/"
660 @echo 'make util-vserver-rpms'
661 @echo " build rpm(s) in RPMS/"
663 @echo "********** Or, horizontally, reach a step for all known packages"
664 @echo 'make codebases'
666 @echo 'make tarballs'
670 @echo "********** Manual targets"
671 @echo "make package-compile"
672 @echo " The regular process uses rpmbuild --rebuild, that performs"
673 @echo " a compilation directory cleanup upon completion. If you need to investigate"
674 @echo " the intermediate compilation directory, use the -compile targets"
675 @echo "********** Cleaning examples"
677 @echo " removes the files made by make"
678 @echo "make distclean"
679 @echo " brute-force cleaning, removes entire directories - requires a new stage1"
680 @echo "make develclean"
681 @echo " rpm-uninstalls all devel packages installed during build"
683 @echo "make iptables-distclean"
684 @echo " deep clean for a given package"
685 @echo "make iptables-codeclean"
686 @echo " run this if you've made a change in the CODEBASES area for iptables"
688 @echo "make util-vserver-clean"
689 @echo " removes codebase, source, tarball, build, rpm and srpm for util-vserver"
690 @echo "make util-vserver-clean-codebase"
691 @echo " and so on for source, tarball, build, rpm and srpm"
693 @echo "********** Info examples"
695 @echo " Displays the value of a given variable (here ALL)"
696 @echo " with only a single plus sign only the value is displayed"
697 @echo "make ulogd-pkginfo"
698 @echo " Displays know attributes of a package"
699 @echo "make kernel-devel-rpminfo"
700 @echo " Displays know attributes of an rpm"
702 @echo "********** Known pakages are"
705 #################### convenience, for debugging only
706 # make +foo : prints the value of $(foo)
707 # make ++foo : idem but verbose, i.e. foo=$(foo)
708 ++%: varname=$(subst +,,$@)
710 @echo "$(varname)=$($(varname))"
711 +%: varname=$(subst +,,$@)
713 @echo "$($(varname))"
715 PKGKEYS := tarballs source codebase srpm rpms rpmnames rpm-release rpm-name rpm-version rpm-subversion
716 %-pkginfo: package=$(subst -pkginfo,,$@)
718 @$(foreach key,$(PKGKEYS),echo "$(package).$(key)=$($(package).$(key))";)
720 RPMKEYS := rpm-path package
721 %-rpminfo: rpm=$(subst -rpminfo,,$@)
723 @$(foreach key,$(RPMKEYS),echo "$(rpm).$(key)=$($(rpm).$(key))";)