2 # Thierry Parmentelat - INRIA Sophia Antipolis
10 # this extracts all specfiles and computes .mk from specfiles
11 # you need to specify PLDISTRO here if relevant - see below
13 # for more info on how to invoke this stuff
15 #################### (fedora) distributions
17 # (*) as of nov. 2007, myplc-devel is deprecated
18 # (*) instead, we create a fresh vserver that holds required tools (see e.g. planetlab-devel.lst)
19 # (*) the build uses the current fedora version as a target for the produced images
20 # (*) so you simply need to create a fedora 8 build image for building fedora-8 images
22 #################### (planetlab) distributions
24 # (*) see README-pldistros.txt
25 # (*) then you need to run
26 # make stage1=true PLDISTRO=onelab
29 # This build deals with 3 kinds of objects
31 # (*) packages are named upon the RPM name; they are mostly lowercase
32 # Add a package to ALL if you want it built as part of the default set.
33 # (*) modules are named after the subversion tree; as of this writing their names
34 # are mostly mixed case like MyPLC or VserverReference
35 # (*) rpms are named in the spec files. A package typically defines several rpms;
36 # rpms are used for defining DEPEND-DEVEL-RPMS. See also package.rpmnames
38 #################### packages
39 # basics: how to build a package - you need/may define the following variables
42 # a package needs one or several modules to build.
45 # the package's specfile; this is relative to the FIRST module in package-MODULES
46 # see 'codebase' below
50 # (*) package-SPECVARS
51 # space-separated list of spec variable definitions, where you can reference make variable that relate to
52 # packages defined BEFORE the current one (note: you should use = - as opposed to := - to define these)
53 # e.g. mydriver-SPECVARS = foo=$(kernel-rpm-release)
54 # would let you use the %release from the kernel's package when rpmbuild'ing mydriver - see automatic below
55 # (*) package-DEPEND-PACKAGES
56 # a set of *packages* that this package depends on
57 # (*) package-DEPEND-DEVEL-RPMS
58 # a set of *rpms* that the build will rpm-install before building <package>
59 # (*) package-DEPEND-FILES
60 # a set of files that the package depends on - and that make needs to know about
61 # if this contains RPMS/yumgroups.xml, then the toplevel RPMS's index
62 # is refreshed with createrepo prior to running rpmbuild
63 # (*) package-RPMFLAGS: Miscellaneous RPM flags
64 # (*) package-RPMBUILD: If not rpmbuild - mostly used for sudo'ing rpmbuild
65 # (*) package-BUILD-FROM-SRPM: set this to any non-empty value, if your package is able to produce
66 # a source rpms by running 'make srpm'
68 #################### modules
69 # Required information about the various modules (set this in e.g. planetlab-tags.mk)
72 # the complete path where this module lies;
73 # you can specify the trunk or a given tag with this variable
75 # OR if the module is managed under cvs (will be obsoleted)
80 #################### automatic variables
82 # the build defines some make variables that are extracted from spec files
84 # (*) $ make ulogd-pkginfo
85 # to see the list f variables attached to a given package
86 # (*) $ make kernel-devel-rpminfo
87 # to see the list f variables attached to a given rpm
91 # exported to spec files as plrelease
92 PLANETLAB_RELEASE = 4.2
97 HOSTARCH := $(shell uname -i)
98 DISTRO := $(shell ./getdistro.sh)
99 RELEASE := $(shell ./getrelease.sh)
100 DISTRONAME := $(shell ./getdistroname.sh)
101 RPM-INSTALL-DEVEL := rpm --force -Uvh
102 # cannot force rpm -e
103 RPM-UNINSTALL-DEVEL := rpm -e
105 #################### Makefile
111 PLDISTRO := planetlab
113 export CVS_RSH := ssh
115 ########## pldistro.mk holds PLDISTRO - it is generated at stage1 (see below)
120 #################### include onelab.mk
121 # describes the set of components
122 PLDISTROCONTENTS := $(PLDISTRO).mk
123 include $(PLDISTROCONTENTS)
125 #################### include <pldistro>-tags.mk
126 # describes where to fetch components, and the related tags if using cvs
127 PLDISTROTAGS := $(PLDISTRO)-tags.mk
128 include $(PLDISTROTAGS)
130 ########## stage1 and stage1iter
131 # extract specs and compute .mk files by running
133 # entering stage1, we compute all the spec files
134 # then we use stage1iter to compute the .mk iteratively,
135 # ensuring that the n-1 first makefiles are loaded when creating the n-th one
136 # when stage1iter is set, it is supposed to be an index (starting at 1) in $(ALL)
138 ALLMKS := $(foreach package, $(ALL), MAKE/$(package).mk)
140 ### stage1iter : need some arithmetic, see
141 # http://www.cmcrossroads.com/articles/ask-mr.-make/learning-gnu-make-functions-with-arithmetic.html
142 ifneq "$(stage1iter)" ""
143 # the first n packages
144 packages := $(wordlist 1,$(words $(stage1iter)),$(ALL))
146 package := $(word $(words $(packages)),$(packages))
147 # the n-1 first packages
148 stage1iter_1 := $(wordlist 2,$(words $(stage1iter)),$(stage1iter))
149 previous := $(wordlist 1,$(words $(stage1iter_1)),$(ALL))
150 previousmks := $(foreach package,$(previous),MAKE/$(package).mk)
151 include $(previousmks)
154 @echo "========== stage1iter : $(package)"
155 # @echo "stage1iter : included .mk files : $(previousmks)"
156 all: $($(package).specpath)
157 all: MAKE/$(package).mk
163 @echo "========== stage1"
166 # specs and makes are done sequentially by stage1iter
169 arg=""; for n in $(ALL) ; do arg="$$arg x"; $(MAKE) --no-print-directory stage1iter="$$arg"; done
172 ### once .mks are OK, you can run make normally
179 # mention $(ALL) here rather than rpms
180 # this is because the inter-package dependencies are expressed like
181 # util-vserver: util-python
187 ### yumgroups.xml : compute from all known .pkgs files
190 ./yumgroups.sh $(PLDISTRO) > $@
192 createrepo = createrepo --quiet -g yumgroups.xml RPMS/
194 repo: RPMS/yumgroups.xml
201 # * to make configuration easier, we always use the first module's
202 # definitions (CVSROOT,TAG, or SVNPATH) to extract the spec file
203 # * for the same reason, in case cvs is used, the first module name is added to
204 # $(package)-SPEC - otherwise the cvs modules have to define spec as
205 # <module>/<module>.spec while svn modules just define it as <module>.spec
207 define stage1_variables
208 $(1).spec = $(notdir $($(1)-SPEC))
209 $(1).specpath = SPECS/$(1).spec
210 $(1).module = $(firstword $($(1)-MODULES))
211 $(1)-SVNPATH = $(strip $($(1)-SVNPATH))
214 $(foreach package, $(ALL), $(eval $(call stage1_variables,$(package))))
217 # for each package, compute whether we need to set date (i.e. whether we use the trunk)
218 # the myplc package is forced to have a date, because it is more convenient
219 # (we cannot bump its number everytime something changes in the system)
220 # myplc-native does not need this trick
222 define package_hasdate
223 $(1).has-date = $(if $(subst myplc,,$(1)), \
224 $(if $($($(1).module)-SVNPATH),\
225 $(if $(findstring /trunk,$($($(1).module)-SVNPATH)),yes,),\
226 $(if $(findstring HEAD,$($($(1).module)-TAG)),yes,)), \
230 $(foreach package, $(ALL), $(eval $(call package_hasdate,$(package))))
232 ### extract spec file from scm
236 (echo -n "# Generated by planetlab build from $($(1)-SPEC) on " ; date) > $($(1).specpath)
237 echo "%define distro $(DISTRO)" >> $($(1).specpath)
238 echo "%define distrorelease $(RELEASE)" >> $($(1).specpath)
239 echo "%define distroname $(DISTRONAME)" >> $($(1).specpath)
240 echo "%define pldistro $(PLDISTRO)" >> $($(1).specpath)
241 echo "%define plrelease $(PLANETLAB_RELEASE)" >> $($(1).specpath)
242 $(if $($(1).has-date),echo "%define date $(shell date +%Y.%m.%d)" >> $($(1).specpath),)
243 $(if $($(1)-SPECVARS), \
244 $(foreach line,$($(1)-SPECVARS), \
245 echo "%define" $(word 1,$(subst =, ,$(line))) "$(word 2,$(subst =, ,$(line)))" >> $($(1).specpath) ;))
246 echo "# included from codebase specfile" >> $($(1).specpath)
247 $(if $($($(1).module)-SVNPATH),\
248 svn cat $($($(1).module)-SVNPATH)/$($(1)-SPEC) >> $($(1).specpath) || rm $($(1).specpath),\
249 cvs -d $($($(1).module)-CVSROOT) checkout \
250 -r $($($(1).module)-TAG) \
251 -p $($(1).module)/$($(1)-SPEC) >> $($(1).specpath))
254 $(foreach package,$(ALL),$(eval $(call target_spec,$(package))))
257 # Base rpmbuild in the current directory
258 # issues on fedora 8 : see the following posts
259 # http://forums.fedoraforum.org/showthread.php?t=39625 - and more specifically post#6
260 # https://www.redhat.com/archives/fedora-devel-list/2007-November/msg00171.html
262 FAKEROOT=/longbuildroot
263 PWD=$(shell /bin/pwd)
264 ifeq "$(PWD)" "$(REALROOT)"
265 export HOME := $(FAKEROOT)
267 export HOME := $(PWD)
270 ifeq "$(shell pwd)" "/build"
271 rm -f $(FAKEROOT) ; ln -s $(REALROOT) $(FAKEROOT)
274 echo "%_topdir $(HOME)" >> $@
275 echo "%_tmppath $(HOME)/tmp" >> $@
276 ./getrpmmacros.sh >> $@
278 ### this utility allows to extract various info from a spec file
279 ### and to define them in makefiles
280 spec2make: spec2make.c
281 $(CC) -g -Wall $< -o $@ -lrpm -lrpmbuild
283 ### run spec2make on the spec file and include the result
284 # usage: spec2make package
286 MAKE/$(1).mk: $($(1).specpath) spec2make .rpmmacros
288 ./spec2make $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk
289 @if [ -z MAKE/$(1).mk ] ; then rm MAKE/$(1).mk ; exit 1 ; fi
292 $(foreach package,$(ALL),$(eval $(call target_mk,$(package))))
294 # stores PLDISTRO in a file
295 # this is done at stage1. later run wont get confused
297 echo "PLDISTRO:=$(PLDISTRO)" > $@
298 echo "PLDISTROTAGS:=$(PLDISTROTAGS)" >> $@
300 savepldistro: pldistro.mk
303 # always refresh this
306 #################### regular make
308 define stage2_variables
309 ### devel dependencies
310 $(1).rpmbuild = $(if $($(1)-RPMBUILD),$($(1)-RPMBUILD),$(RPMBUILD)) $($(1)-RPMFLAGS)
311 $(1).all-devel-rpm-paths := $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).rpm-path))
312 $(1).depend-devel-packages := $(sort $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).package)))
313 ALL-DEVEL-RPMS += $($(1)-DEPEND-DEVEL-RPMS)
316 $(foreach package,$(ALL),$(eval $(call stage2_variables,$(package))))
317 ALL-DEVEL-RPMS := $(sort $(ALL-DEVEL-RPMS))
320 ### pack sources into tarballs
321 ALLTARBALLS:= $(foreach package, $(ALL), $($(package).tarballs))
322 tarballs: $(ALLTARBALLS)
323 @echo $(words $(ALLTARBALLS)) source tarballs OK
326 SOURCES/%.tar.bz2: SOURCES/%
327 tar chpjf $@ -C SOURCES $*
329 SOURCES/%.tar.gz: SOURCES/%
330 tar chpzf $@ -C SOURCES $*
332 SOURCES/%.tgz: SOURCES/%
333 tar chpzf $@ -C SOURCES $*
336 URLS/%: url=$(subst @colon@,:,$(subst @slash@,/,$(notdir $@)))
337 URLS/%: basename=$(notdir $(url))
339 echo curl $(url) -o SOURCES/$(basename)
342 ### the directory SOURCES/<package>-<version> is made
343 # with a copy -rl from CODEBASES/<package>
344 # the former is $(package.source) and the latter is $(package.codebase)
345 ALLSOURCES:=$(foreach package, $(ALL), $($(package).source))
346 # so that make does not use the rule below directly for creating the tarball files
347 .SECONDARY: $(ALLSOURCES)
349 sources: $(ALLSOURCES)
350 @echo $(words $(ALLSOURCES)) versioned source trees OK
353 define target_link_codebase_sources
354 $($(1).source): $($(1).codebase) ; mkdir -p SOURCES ; cp -rl $($(1).codebase) $($(1).source)
357 $(foreach package,$(ALL),$(eval $(call target_link_codebase_sources,$(package))))
359 ### codebase extraction
360 ALLCODEBASES:=$(foreach package, $(ALL), $($(package).codebase))
361 # so that make does not use the rule below directly for creating the tarball files
362 .SECONDARY: $(ALLCODEBASES)
364 codebases : $(ALLCODEBASES)
365 @echo $(words $(ALLCODEBASES)) codebase OK
369 # usage: extract_single_module package
370 define extract_single_module
372 $(if $($($(1).module)-SVNPATH), cd CODEBASES && svn export $($($(1).module)-SVNPATH) $(1), cd CODEBASES && cvs -d $($($(1).module)-CVSROOT) export -r $($($(1).module)-TAG) -d $(1) $($(1).module))
375 # usage: extract_multi_module package
376 define extract_multi_module
377 mkdir -p CODEBASES/$(1) && cd CODEBASES/$(1) && (\
378 $(foreach m,$($(1)-MODULES), $(if $($(m)-SVNPATH), svn export $($(m)-SVNPATH) $(m);, cvs -d $($(m)-CVSROOT) export -r $($(m)-TAG) $(m);)))
381 CODEBASES/%: package=$(notdir $@)
382 CODEBASES/%: multi_module=$(word 2,$($(package)-MODULES))
384 @(echo -n "XXXXXXXXXXXXXXX -- BEG CODEBASE $(package) : $@ " ; date)
385 $(if $(multi_module),\
386 $(call extract_multi_module,$(package)),\
387 $(call extract_single_module,$(package)))
388 @(echo -n "XXXXXXXXXXXXXXX -- END CODEBASE $(package) : $@ " ; date)
391 ALLSRPMS:=$(foreach package,$(ALL),$($(package).srpm))
393 @echo $(words $(ALLSRPMS)) source rpms OK
396 # usage: target_source_rpm package
397 # select upon the package name, whether it contains srpm or not
398 define target_source_rpm
399 ifeq "$($(1)-BUILD-FROM-SRPM)" ""
400 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).tarballs)
401 mkdir -p BUILD SRPMS tmp
402 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using SOURCES) " ; date)
403 $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
404 $($(1).rpmbuild) -bs $($(1).specpath)
405 $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
406 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
408 $($(1).srpm): $($(1).specpath) .rpmmacros $($(1).codebase)
409 mkdir -p BUILD SRPMS tmp
410 @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using make srpm) " ; date)
411 $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
412 make -C $($(1).codebase) srpm SPECFILE=$(HOME)/$($(1).specpath) && \
413 rm -f SRPMS/$(notdir $($(1).srpm)) && \
414 ln $($(1).codebase)/$(notdir $($(1).srpm)) SRPMS/$(notdir $($(1).srpm))
415 $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
416 @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
420 $(foreach package,$(ALL),$(eval $(call target_source_rpm,$(package))))
422 ### binary rpms are made from source rpm
423 ALLRPMS:=$(foreach package,$(ALL),$($(package).rpms))
424 # same as above, mention $(ALL) and not $(ALLRPMS)
426 @echo $(words $(ALLRPMS)) binary rpms OK
429 # use tmp dirs when building binary rpm so make remains idempotent
430 # otherwise SOURCES/ or SPEC gets touched again - which leads to rebuilding
431 RPM-USE-TMP-DIRS = --define "_sourcedir $(HOME)/tmp" --define "_specdir $(HOME)/tmp"
432 RPM-USE-COMPILE-DIRS = --define "_sourcedir $(HOME)/COMPILE" --define "_specdir $(HOME)/COMPILE"
434 # usage: build_binary_rpm package
435 # xxx hacky - invoke createrepo if DEPEND-FILES mentions RPMS/yumgroups.xml
436 define target_binary_rpm
437 $($(1).rpms): $($(1).srpm)
439 @(echo -n "XXXXXXXXXXXXXXX -- BEG RPM $(1) " ; date)
440 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
441 $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
442 $($(1).rpmbuild) --rebuild $(RPM-USE-TMP-DIRS) $($(1).srpm)
443 $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
444 @(echo -n "XXXXXXXXXXXXXXX -- END RPM $(1) " ; date)
445 # for manual use only - in case we need to investigate the results of an rpmbuild
446 $(1)-compile: $($(1).srpm)
448 @(echo -n "XXXXXXXXXXXXXXX -- BEG compile $(1) " ; date)
449 $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
450 $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
451 $($(1).rpmbuild) --recompile $(RPM-USE-TMP-DIRS) $($(1).srpm)
452 $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
453 @(echo -n "XXXXXXXXXXXXXXX -- END compile $(1) " ; date)
457 $(foreach package,$(ALL),$(eval $(call target_binary_rpm,$(package))))
459 # e.g. make proper -> does propers rpms
460 # usage shorthand_target package
461 define target_shorthand
464 $(1)-spec: $($(1)-SPEC)
468 $(1)-tarball: $($(1).tarballs)
470 $(1)-codebase: $($(1).codebase)
472 $(1)-source: $($(1).source)
473 .PHONY: $(1)-codebase
474 $(1)-rpms: $($(1).rpms)
476 $(1)-srpm: $($(1).srpm)
480 $(foreach package,$(ALL),$(eval $(call target_shorthand,$(package))))
482 ### file dependencies
483 define package_depends_on_file
488 define target_dependfiles
489 $(foreach file,$($(1)-DEPEND-FILES),$(eval $(call package_depends_on_file,$(1),$(file))))
492 $(foreach package,$(ALL),$(eval $(call target_dependfiles,$(package))))
494 ### package dependencies
495 define package_depends_on_package
498 $($(1).srpm):$($(2).rpms)
501 define target_depends
502 $(foreach package,$($(1)-DEPEND-PACKAGES) $($(1).depend-devel-packages),$(eval $(call package_depends_on_package,$(1),$(package))))
505 $(foreach package,$(ALL),$(eval $(call target_depends,$(package))))
508 # usage: target_clean package
511 rm -rf $($(1).codebase)
512 .PHONY: $(1)-clean-codebase
513 CLEANS += $(1)-clean-codebase
515 rm -rf $($(1).source)
516 .PHONY: $(1)-clean-source
517 CLEANS += $(1)-clean-source
519 rm -rf $($(1).tarballs)
520 .PHONY: $(1)-clean-tarball
521 CLEANS += $(1)-clean-tarball
523 rm -rf BUILD/$(notdir $($(1).source))
524 CLEANS += $(1)-clean-build
527 .PHONY: $(1)-clean-rpms
528 CLEANS += $(1)-clean-rpms
531 .PHONY: $(1)-clean-srpm
532 CLEANS += $(1)-clean-srpm
533 $(1)-codeclean: $(1)-clean-source $(1)-clean-tarball $(1)-clean-build $(1)-clean-rpms $(1)-clean-srpm
534 $(1)-clean: $(1)-clean-codebase $(1)-codeclean
535 .PHONY: $(1)-codeclean $(1)-clean
537 rm -rf $($(1).specpath)
538 .PHONY: $(1)-clean-spec
541 .PHONY: $(1)-clean-make
542 $(1)-distclean: $(1)-distclean1 $(1)-distclean2
543 $(1)-distclean1: $(1)-clean-spec $(1)-clean-make
544 $(1)-distclean2: $(1)-clean
545 .PHONY: $(1)-distclean $(1)-distclean1 $(1)-distclean2
548 $(foreach package,$(ALL),$(eval $(call target_clean,$(package))))
556 @echo Available clean targets
559 ### brute force clean
561 rm -rf pldistro.mk .rpmmacros spec2make SPECS MAKE
563 rm -rf CODEBASES SOURCES BUILD RPMS SRPMS tmp
564 distclean: distclean1 distclean2
565 .PHONY: distclean1 distclean2 distclean
568 $(RPM-UNINSTALL-DEVEL) $(ALL-DEVEL-RPMS)
571 # gather build information for the 'About' page
572 # when run from crontab, INIT_CWD not properly set (says /root ..)
573 # so, the nightly build passes NIGHTLY_BASE here
574 # also store the nightly_base in .base for any post-processing purposes
576 @echo 'Creating myplc-release'
578 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx build info" >> $@
579 $(MAKE) --no-print-directory version-build >> $@
580 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx svn info" >> $@
581 $(MAKE) --no-print-directory version-svns >> $@
582 echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx rpm info" >> $@
583 $(MAKE) --no-print-directory version-rpms >> $@
584 @echo $(NIGHTLY_BASE) > .base
587 @echo -n 'Build build-date: ' ; date '+%Y.%m.%d'
588 @echo -n 'Build build-time: ' ; date '+%H:%M-%Z'
589 @echo -n 'Build build-hostname: ' ; hostname
590 @echo "Build build-base: $(NIGHTLY_BASE)"
591 @echo "Build planetlab-distro: $(PLDISTRO)"
592 @echo "Build planetlab-tags: $(PLDISTROTAGS)"
593 @echo -n 'Build planetlab-tagsid: ' ; fgrep '$$''Id' $(PLDISTROTAGS)
594 @echo "Build target-arch: $(HOSTARCH)"
595 @echo "Build target-distro: $(DISTRO)"
596 @echo "Build target-distroname: $(DISTRONAME)"
597 @echo "Build target-release: $(RELEASE)"
598 @echo "Build target-personality: $(NIGHTLY_PERSONALITY)"
602 VFORMAT="%30s := %s\n"
603 define svn_version_target
605 @$(if $($(1)-SVNPATH),\
606 printf $(VFORMAT) $(1)-SVNPATH "$($(1)-SVNPATH)",\
607 printf $(VFORMAT) $(1)-CVSROOT "$($(1)-CVSROOT)" ; printf $(VFORMAT) $(1)-TAG "$($(1)-TAG)")
610 # compute all modules
612 $(foreach package,$(ALL), $(eval ALL-MODULES+=$($(package)-MODULES)))
613 ALL-MODULES:=$(sort $(ALL-MODULES))
615 $(foreach module,$(ALL-MODULES), $(eval $(call svn_version_target,$(module))))
617 version-svns: $(foreach module, $(ALL-MODULES), $(module)-version-svn)
619 RFORMAT="%20s :: version=%s release=%s\n"
620 define rpm_version_target
622 @printf $(RFORMAT) $($(1).rpm-name) $($(1).rpm-version) $($(1).rpm-release)
623 version-rpms: $(1)-version-rpm
626 $(foreach package,$(sort $(ALL)), $(eval $(call rpm_version_target,$(package))))
628 versions: myplc-release version-build version-svns version-rpms
629 .PHONY: versions version-build version-rpms version-svns
631 #################### include install Makefile
632 # the default is to use the distro-dependent install file
633 # however the main distro file can redefine PLDISTROINSTALL
634 ifndef PLDISTROINSTALL
635 PLDISTROINSTALL := $(PLDISTRO)-install.mk
638 -include $(PLDISTROINSTALL)
642 @echo "********** Run make in two stages:"
644 @echo "make stage1=true PLDISTRO=onelab"
645 @echo " -> extracts all spec files in SPECS/ and mk files in MAKE/"
646 @echo " as well as save PLDISTRO for subsequent runs"
648 @echo "********** Then you can use the following targets"
650 @echo " rebuilds everything"
651 @echo 'make util-vserver'
652 @echo " makes the RPMS related to util-vserver"
653 @echo " equivalent to 'make util-vserver-rpms'"
655 @echo "********** Or, vertically - step-by-step for a given package"
656 @echo 'make util-vserver-codebase'
657 @echo " performs codebase extraction in CODEBASES/util-vserver"
658 @echo 'make util-vserver-source'
659 @echo " creates source link in SOURCES/util-vserver-<version>"
660 @echo 'make util-vserver-tarball'
661 @echo " creates source tarball in SOURCES/util-vserver-<version>.<tarextension>"
662 @echo 'make util-vserver-srpm'
663 @echo " build source rpm in SRPMS/"
664 @echo 'make util-vserver-rpms'
665 @echo " build rpm(s) in RPMS/"
667 @echo "********** Or, horizontally, reach a step for all known packages"
668 @echo 'make codebases'
670 @echo 'make tarballs'
674 @echo "********** Manual targets"
675 @echo "make package-compile"
676 @echo " The regular process uses rpmbuild --rebuild, that performs"
677 @echo " a compilation directory cleanup upon completion. If you need to investigate"
678 @echo " the intermediate compilation directory, use the -compile targets"
679 @echo "********** Cleaning examples"
681 @echo " removes the files made by make"
682 @echo "make distclean"
683 @echo " brute-force cleaning, removes entire directories - requires a new stage1"
684 @echo "make develclean"
685 @echo " rpm-uninstalls all devel packages installed during build"
687 @echo "make iptables-distclean"
688 @echo " deep clean for a given package"
689 @echo "make iptables-codeclean"
690 @echo " run this if you've made a change in the CODEBASES area for iptables"
692 @echo "make util-vserver-clean"
693 @echo " removes codebase, source, tarball, build, rpm and srpm for util-vserver"
694 @echo "make util-vserver-clean-codebase"
695 @echo " and so on for source, tarball, build, rpm and srpm"
697 @echo "********** Info examples"
699 @echo " Displays the value of a given variable (here ALL)"
700 @echo " with only a single plus sign only the value is displayed"
701 @echo "make ulogd-pkginfo"
702 @echo " Displays know attributes of a package"
703 @echo "make kernel-devel-rpminfo"
704 @echo " Displays know attributes of an rpm"
706 @echo "********** Known pakages are"
709 #################### convenience, for debugging only
710 # make +foo : prints the value of $(foo)
711 # make ++foo : idem but verbose, i.e. foo=$(foo)
712 ++%: varname=$(subst +,,$@)
714 @echo "$(varname)=$($(varname))"
715 +%: varname=$(subst +,,$@)
717 @echo "$($(varname))"
719 PKGKEYS := tarballs source codebase srpm rpms rpmnames rpm-release rpm-name rpm-version rpm-subversion
720 %-pkginfo: package=$(subst -pkginfo,,$@)
722 @$(foreach key,$(PKGKEYS),echo "$(package).$(key)=$($(package).$(key))";)
724 RPMKEYS := rpm-path package
725 %-rpminfo: rpm=$(subst -rpminfo,,$@)
727 @$(foreach key,$(RPMKEYS),echo "$(rpm).$(key)=$($(rpm).$(key))";)