2 REVISION=$(echo '$Revision: 18120 $' | sed -e 's,\$,,g' -e 's,^\w*:\s,,' )
7 # default values, tunable with command-line options
9 DEFAULT_PLDISTRO=planetlab
10 DEFAULT_PERSONALITY=linux64
11 DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
12 DEFAULT_BUILD_SCM_URL="git://git.onelab.eu/build"
15 # default gpg path used in signing yum repo
16 DEFAULT_GPGPATH="/etc/planetlab"
17 # default email to use in gpg secring
18 DEFAULT_GPGUID="root@$( /bin/hostname )"
20 DEFAULT_TESTCONFIG="default"
21 # for passing args to run_log
24 # for publishing results, and the tests settings
26 y=$(hostname|sed -e s,inria,,)
28 if [ "$x" != "$y" ] ; then
29 DEFAULT_WEBPATH="/build/@PLDISTRO@/"
30 DEFAULT_TESTBUILDURL="http://build.onelab.eu/"
31 # this is where the buildurl is pointing towards
32 DEFAULT_WEBROOT="/build/"
33 DEFAULT_TESTMASTER="testmaster.onelab.eu"
35 DEFAULT_WEBPATH="/build/@FCDISTRO@/@PLDISTRO@/"
36 DEFAULT_TESTBUILDURL="http://build.planet-lab.org/"
37 # this is where the buildurl is pointing towards
38 DEFAULT_WEBROOT="/build/"
39 DEFAULT_TESTMASTER="manager.test.planet-lab.org"
43 # assuming vserver runs in UTC
44 DATE=$(date +'%Y.%m.%d')
46 # temporary - wrap a quick summary of suspicious stuff
47 # this is to focus on installation that go wrong
48 # use with care, a *lot* of other things can go bad as well
51 echo "******************** BEG SUMMARY"
54 # read a full log and tries to extract the interesting stuff
57 m_show_line=re.compile(".* (BEG|END) (RPM|VSERVER).*|.*'boot'.*|\* .*| \* .*|.*is not installed.*|.*PROPFIND.*|.* (BEG|END).*:run_log.*|.* Within vserver (BEG|END) .*|.* MAIN (BEG|END).*")
58 m_installing_any=re.compile('\r (Installing:[^\]]*]) ')
59 m_installing_err=re.compile('\r (Installing:[^\]]*])(..+)')
60 m_installing_end=re.compile('Installed:.*')
61 m_installing_doc1=re.compile("(.*)install-info: No such file or directory for /usr/share/info/\S+(.*)")
62 m_installing_doc2=re.compile("(.*)grep: /usr/share/info/dir: No such file or directory(.*)")
64 def summary (filename):
73 for line in f.xreadlines():
74 # first off : discard warnings related to doc
75 if m_installing_doc1.match(line):
76 (begin,end)=m_installing_doc1.match(line).groups()
78 if m_installing_doc2.match(line):
79 (begin,end)=m_installing_doc2.match(line).groups()
81 # unconditionnally show these lines
82 if m_show_line.match(line):
84 # an 'installing' line with messages afterwards : needs to be echoed
85 elif m_installing_err.match(line):
86 (installing,error)=m_installing_err.match(line).groups()
87 print '>>>',installing
90 # closing an 'installing' section
91 elif m_installing_end.match(line):
93 # any 'installing' line
94 elif m_installing_any.match(line):
96 installing=m_installing_any.match(line).group(1)
97 print '>>>',installing
99 # print lines when echo is true
101 if echo: print '>>>',line,
104 print 'Failed to analyze',filename
106 for arg in sys.argv[1:]:
109 echo "******************** END SUMMARY"
112 ### we might build on a box other than the actual web server
113 # utilities for handling the pushed material (rpms, logfiles, ...)
114 function webpublish_misses_dir () { ssh root@${WEBHOST} "bash -c \"test \! -d $1\"" ; }
115 function webpublish () { ssh root@${WEBHOST} "$@" ; }
116 function webpublish_cp_local_to_remote () { scp $1 root@${WEBHOST}:$2 ; }
117 function webpublish_cp_stdin_to_file () { ssh root@${WEBHOST} cat \> $1; }
118 function webpublish_append_stdin_to_file () { ssh root@${WEBHOST} cat \>\> $1; }
119 # provide remote dir as first argument, so any number of local files can be passed next
120 function webpublish_rsync_dir () { rsync --archive --delete $VERBOSE $2 root@${WEBHOST}:$1 ; }
121 function webpublish_rsync_files () {
123 rsync --archive $VERBOSE "$@" root@${WEBHOST}:"$remote" ;
126 # Notify recipient of failure or success, manage various stamps
129 # early stage ? - let's not create /build/@PLDISTRO@
130 if test -z "$WEBLOG" ; then
133 WEBBASE=/tmp/vbuild-early-$(date +%Y-%m-%d)
134 WEBLOG=/tmp/vbuild-early-$(date +%Y-%m-%d).log.txt
136 webpublish mkdir -p $WEBBASE ||:
137 webpublish_cp_local_to_remote $LOG $WEBLOG ||:
138 summary $LOG | webpublish_append_stdin_to_file $WEBLOG ||:
139 (echo -n "============================== $COMMAND: failure at " ; date ; \
140 webpublish tail --lines=1000 $WEBLOG) | \
141 webpublish_cp_stdin_to_file $WEBBASE.ko ||:
142 if [ -n "$MAILTO" ] ; then
144 echo "Subject: KO ${BASE} ${MAIL_SUBJECT}" ; \
145 echo "To: $MAILTO" ; \
146 echo "see build results at $WEBBASE_URL" ; \
147 echo "including full build log at $WEBBASE_URL/log.txt" ; \
148 echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
149 echo "........................................" ; \
150 webpublish tail --lines=1000 $WEBLOG ) | \
156 function success () {
158 # early stage ? - let's not create /build/@PLDISTRO@
159 if test -z "$WEBLOG" ; then
162 WEBLOG=/tmp/vbuild-early-$(date +%Y-%m-%d).log.txt
164 webpublish mkdir -p $WEBBASE
165 webpublish_cp_local_to_remote $LOG $WEBLOG
166 summary $LOG | webpublish_append_stdin_to_file $WEBLOG
167 if [ -n "$DO_TEST" ] ; then
170 echo "Successfully built and tested" ; \
171 echo "see build results at $WEBBASE_URL" ; \
172 echo "including full build log at $WEBBASE_URL/log.txt" ; \
173 echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
174 ) | webpublish_cp_stdin_to_file $WEBBASE.pass
175 webpublish rm -f $WEBBASE.pkg-ok $WEBBASE.ko
177 short_message="PKGOK"
179 echo "Successful package-only build, no test requested" ; \
180 echo "see build results at $WEBBASE_URL" ; \
181 echo "including full build log at $WEBBASE_URL/log.txt" ; \
182 ) | webpublish_cp_stdin_to_file $WEBBASE.pkg-ok
183 webpublish rm -f $WEBBASE.ko
185 if [ -n "$MAILTO" ] ; then
187 echo "Subject: $short_message ${BASE} ${MAIL_SUBJECT}" ; \
188 echo "To: $MAILTO" ; \
189 echo "$PLDISTRO ($BASE) build for $FCDISTRO completed on $(date)" ; \
190 echo "see build results at $WEBBASE_URL" ; \
191 echo "including full build log at $WEBBASE_URL/log.txt" ; \
192 [ -n "$DO_TEST" ] && echo "and complete test logs at $WEBBASE_URL/testlogs" ) \
195 # XXX For some reason, we haven't been getting this email for successful builds. If this sleep
196 # doesn't fix the problem, I'll remove it -- Sapan.
201 # run in the vserver - do not manage success/failure, will be done from the root ctx
206 echo -n "============================== Starting $COMMAND:build on "
212 echo "Running make IN $(pwd)"
214 # stuff our own variable settings
215 if echo $BUILD_SCM_URL | grep -q git ; then
216 MAKEVARS=("build-GITPATH=${BUILD_SCM_URL}" "${MAKEVARS[@]}")
218 MAKEVARS=("build-SVNPATH=${BUILD_SCM_URL}" "${MAKEVARS[@]}")
220 MAKEVARS=("PLDISTRO=${PLDISTRO}" "${MAKEVARS[@]}")
221 MAKEVARS=("PLDISTROTAGS=${PLDISTROTAGS}" "${MAKEVARS[@]}")
222 MAKEVARS=("PERSONALITY=${PERSONALITY}" "${MAKEVARS[@]}")
223 MAKEVARS=("MAILTO=${MAILTO}" "${MAKEVARS[@]}")
224 MAKEVARS=("WEBPATH=${WEBPATH}" "${MAKEVARS[@]}")
225 MAKEVARS=("TESTBUILDURL=${TESTBUILDURL}" "${MAKEVARS[@]}")
226 MAKEVARS=("WEBROOT=${WEBROOT}" "${MAKEVARS[@]}")
228 MAKEVARS=("BASE=${BASE}" "${MAKEVARS[@]}")
231 /build/latex-first-run.sh || :
234 make -C /build $DRY_RUN "${MAKEVARS[@]}" stage1=true
236 make -C /build $DRY_RUN "${MAKEVARS[@]}" versions
238 make -C /build $DRY_RUN "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
242 # this was formerly run in the myplc-devel chroot but now is run in the root context,
243 # this is so that the .ssh config gets done manually, and once and for all
244 function run_log () {
249 echo "============================== BEG $COMMAND:run_log on $(date)"
251 ### the URL to the RPMS/<arch> location
252 # f12 now has everything in i686; try i386 first as older fedoras have both
254 for a in i386 i686 x86_64; do
255 archdir=/vservers/$BASE/build/RPMS/$a
256 if [ -d $archdir ] ; then
257 # where was that installed
258 url=$(echo $archdir | sed -e "s,/vservers/${BASE}/build,${WEBPATH}/${BASE},")
259 url=$(echo $url | sed -e "s,${WEBROOT},${TESTBUILDURL},")
264 if [ -z "$url" ] ; then
265 echo "$COMMAND: Cannot locate arch URL for testing"
270 testmaster_ssh="root@${TESTMASTER}"
272 # test directory name on test box
276 ssh -n ${testmaster_ssh} rm -rf ${testdir} ${testdir}.git
278 # check it out in the build
279 vserver $BASE exec make -C /build tests-module
281 # push it onto the testmaster - just the 'system' subdir is enough
282 rsync --verbose --archive /vservers/$BASE/build/MODULES/tests/system/ ${testmaster_ssh}:${BASE}
283 # toss the build in the bargain, so the tests don't need to mess with extracting it
284 rsync --verbose --archive /vservers/$BASE/build/MODULES/build ${testmaster_ssh}:${BASE}/
286 # invoke test on testbox - pass url and build url - so the tests can use vtest-init-vserver.sh
287 run_log_env="-p $PERSONALITY -d $PLDISTRO -f $FCDISTRO"
289 # need to proceed despite of set -e
291 # passing the build_scm_url should not be needed anymore
292 ssh 2>&1 -n ${testmaster_ssh} ${testdir}/run_log --build ${BUILD_SCM_URL} --url ${url} $run_log_env $RUN_LOG_EXTRAS $VERBOSE --all || success=
294 # gather logs in the build vserver
295 mkdir -p /vservers/$BASE/build/testlogs
296 rsync --verbose --archive ${testmaster_ssh}:$BASE/logs/ /vservers/$BASE/build/testlogs
297 # push them to the build web
298 chmod -R a+r /vservers/$BASE/build/testlogs/
299 webpublish_rsync_dir $WEBPATH/$BASE/testlogs/ /vservers/$BASE/build/testlogs/
301 echo "============================== END $COMMAND:run_log on $(date)"
303 if [ -z "$success" ] ; then
304 echo "Tests have failed - bailing out"
310 function in_root_context () {
311 rpm -q util-vserver > /dev/null
314 # this part won't work if WEBHOST does not match the local host
315 # would need to be made webpublish_* compliant
316 # but do we really need this feature anyway ?
317 function sign_node_packages () {
319 echo "Signing node packages"
323 repository=$WEBPATH/$BASE/RPMS/
324 # the rpms that need signing
326 # and the corresponding stamps
329 for package in $(find $repository/ -name '*.rpm') ; do
330 stamp=$repository/signed-stamps/$(basename $package).signed
331 # If package is newer than signature stamp
332 if [ $package -nt $stamp ] ; then
333 new_rpms="$new_rpms $package"
334 new_stamps="$new_stamps $stamp"
336 # Or than createrepo database
337 [ $package -nt $repository/repodata/repomd.xml ] && need_createrepo=true
340 if [ -n "$new_rpms" ] ; then
341 # Create a stamp once the package gets signed
342 mkdir $repository/signed-stamps 2> /dev/null
344 # Sign RPMS. setsid detaches rpm from the terminal,
345 # allowing the (hopefully blank) GPG password to be
346 # entered from stdin instead of /dev/tty.
348 --define "_signature gpg" \
349 --define "_gpg_path $GPGPATH" \
350 --define "_gpg_name $GPGUID" \
351 --resign $new_rpms && touch $new_stamps
354 # Update repository index / yum metadata.
355 if [ -n "$need_createrepo" ] ; then
356 echo "Indexing node packages after signing"
357 if [ -f $repository/yumgroups.xml ] ; then
358 createrepo --quiet -g yumgroups.xml $repository
360 createrepo --quiet $repository
365 function show_env () {
367 echo FCDISTRO=$FCDISTRO
368 echo PLDISTRO=$PLDISTRO
369 echo PERSONALITY=$PERSONALITY
371 echo BUILD_SCM_URL=$BUILD_SCM_URL
372 echo MAKEVARS="${MAKEVARS[@]}"
373 echo DRY_RUN="$DRY_RUN"
374 echo PLDISTROTAGS="$PLDISTROTAGS"
375 # this does not help, it's not yet set when we run show_env
376 #echo WEBPATH="$WEBPATH"
377 echo TESTBUILDURL="$TESTBUILDURL"
378 echo WEBHOST="$WEBHOST"
379 if in_root_context ; then
380 echo PLDISTROTAGS="$PLDISTROTAGS"
382 if [ -f /build/$PLDISTROTAGS ] ; then
383 echo "XXXXXXXXXXXXXXXXXXXX Contents of tags definition file /build/$PLDISTROTAGS"
384 cat /build/$PLDISTROTAGS
385 echo "XXXXXXXXXXXXXXXXXXXX end tags definition"
387 echo "XXXXXXXXXXXXXXXXXXXX Cannot find tags definition file /build/$PLDISTROTAGS, assuming remote pldistro"
393 function setupssh () {
397 if [ -f ${sshkey} ] ; then
398 SSHDIR=/vservers/${base}/root/.ssh
400 cp $sshkey ${SSHDIR}/thekey
402 echo " IdentityFile ~/.ssh/thekey"; \
403 echo " StrictHostKeyChecking no" ) > ${SSHDIR}/config
405 chmod 400 ${SSHDIR}/*
407 echo "WARNING : could not find provided ssh key $sshkey - ignored"
412 echo "Usage: $COMMAND [option] [var=value...] make-targets"
413 echo "This is $REVISION"
414 echo "Supported options"
415 echo " -f fcdistro - defaults to $DEFAULT_FCDISTRO"
416 echo " -d pldistro - defaults to $DEFAULT_PLDISTRO"
417 echo " -p personality - defaults to $DEFAULT_PERSONALITY"
418 echo " -m mailto - no default"
419 echo " -s build_scm_url - git or svn URL where to fetch the build module - defaults to $DEFAULT_BUILD_SCM_URL"
420 echo " define GIT tag or branch name appending @tagname to url"
421 echo " -t pldistrotags - defaults to \${PLDISTRO}-tags.mk"
422 echo " -b base - defaults to $DEFAULT_BASE"
423 echo " @NAME@ replaced as appropriate"
424 echo " -o base: (overwrite) do not re-create vserver, re-use base instead"
425 echo " the -f/-d/-p/-m/-s/-t options are uneffective in this case"
426 echo " -c testconfig - defaults to $DEFAULT_TESTCONFIG"
427 echo " -y {pl,pg} - passed to run_log"
428 echo " -e step - passed to run_log"
429 echo " -X : passes --lxc to run_log"
430 echo " -S : passes --vs to run_log"
431 echo " -x <run_log_args> - a hook to pass other arguments to run_log"
432 echo " -w webpath - defaults to $DEFAULT_WEBPATH"
433 echo " -W testbuildurl - defaults to $DEFAULT_TESTBUILDURL; this is also used to get the hostname where to publish builds"
434 echo " -r webroot - defaults to $DEFAULT_WEBROOT - the fs point where testbuildurl actually sits"
435 echo " -M testmaster - defaults to $DEFAULT_TESTMASTER"
436 echo " -Y - sign yum repo in webpath"
437 echo " -g gpg_path - to the gpg secring used to sign rpms. Defaults to $DEFAULT_GPGPATH"
438 echo " -u gpg_uid - email used in secring. Defaults to $DEFAULT_GPGUID"
439 echo " -K svnsshkey - specify key to use when svn+ssh:// URLs are used for SVNPATH"
440 echo " -S - do not publish source rpms"
441 echo " -B - run build only"
442 echo " -T - run test only"
443 echo " -n - dry-run: -n passed to make - vserver gets created though - no mail sent"
444 echo " -v - be verbose"
445 echo " -7 - uses weekday-@FCDISTRO@ as base"
446 echo " -i ifname - defaults to $DEFAULT_IFNAME - used to determine local IP"
447 echo " --build-branch branch - build using the branch from build module"
466 OPTS=$(getopt -o "f:d:p:m:s:t:b:o:c:y:e:XSx:w:W:r:M:Yg:u:K:SBTnv7i:P:h" -l "build-branch:" -- $@)
474 -f) FCDISTRO=$2; shift 2 ;;
475 -d) PLDISTRO=$2; shift 2 ;;
476 -p) PERSONALITY=$2; shift 2 ;;
477 -m) MAILTO=$2; shift 2 ;;
478 -s) BUILD_SCM_URL=$2; shift 2 ;;
479 -t) PLDISTROTAGS=$2; shift 2 ;;
480 -b) BASE=$2; shift 2 ;;
481 -o) OVERBASE=$2; shift 2 ;;
482 -c) TESTCONFIG="$TESTCONFIG $2"; shift 2 ;;
483 ########## passing stuff to run_log
484 # -y foo -> run_log -y foo
485 -y) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --rspec-style $2"; shift 2 ;;
486 # -e foo -> run_log -e foo
487 -e) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --exclude $2"; shift 2 ;;
488 # -X -> run_log --lxc
489 -X) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --lxc"; shift;;
491 -S) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --vs"; shift;;
492 # more general form to pass args to run_log
493 # -x foo -> run_log foo
494 -x) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS $2"; shift 2;;
496 -w) WEBPATH=$2; shift 2 ;;
497 -W) TESTBUILDURL=$2; shift 2 ;;
498 -r) WEBROOT=$2; shift 2 ;;
499 -M) TESTMASTER=$2; shift 2 ;;
500 -Y) SIGNYUMREPO=true; shift ;;
501 -g) GPGPATH=$2; shift 2 ;;
502 -u) GPGUID=$2; shift 2 ;;
503 -K) SSH_KEY=$2; shift 2 ;;
504 -S) PUBLISH_SRPMS="" ; shift ;;
505 -B) DO_TEST= ; shift ;;
506 -T) DO_BUILD= ; shift;;
507 -n) DRY_RUN="-n" ; shift ;;
508 -v) set -x ; VERBOSE="-v" ; shift ;;
509 -7) BASE="$(date +%a|tr A-Z a-z)-@FCDISTRO@" ; shift ;;
510 -i) IFNAME=$2; shift 2 ;;
511 -P) PREINSTALLED="-P $2"; shift 2;;
517 # preserve options for passing them again later, together with expanded base
520 # allow var=value stuff;
521 for target in "$@" ; do
522 # check if contains '='
523 target1=$(echo $target | sed -e s,=,,)
524 if [ "$target" = "$target1" ] ; then
525 MAKETARGETS=(${MAKETARGETS[@]} "$target")
527 MAKEVARS=(${MAKEVARS[@]} "$target")
532 [ -z "$FCDISTRO" ] && FCDISTRO=$DEFAULT_FCDISTRO
533 [ -z "$PLDISTRO" ] && PLDISTRO=$DEFAULT_PLDISTRO
534 [ -z "$PERSONALITY" ] && PERSONALITY=$DEFAULT_PERSONALITY
535 [ -z "$PLDISTROTAGS" ] && PLDISTROTAGS="${PLDISTRO}-tags.mk"
536 [ -z "$BASE" ] && BASE="$DEFAULT_BASE"
537 [ -z "$WEBPATH" ] && WEBPATH="$DEFAULT_WEBPATH"
538 [ -z "$TESTBUILDURL" ] && TESTBUILDURL="$DEFAULT_TESTBUILDURL"
539 [ -z "$WEBROOT" ] && WEBROOT="$DEFAULT_WEBROOT"
540 [ -z "$GPGPATH" ] && GPGPATH="$DEFAULT_GPGPATH"
541 [ -z "$GPGUID" ] && GPGUID="$DEFAULT_GPGUID"
542 [ -z "$IFNAME" ] && IFNAME="$DEFAULT_IFNAME"
543 [ -z "$BUILD_SCM_URL" ] && BUILD_SCM_URL="$DEFAULT_BUILD_SCM_URL"
544 [ -z "$TESTCONFIG" ] && TESTCONFIG="$DEFAULT_TESTCONFIG"
545 [ -z "$TESTMASTER" ] && TESTMASTER="$DEFAULT_TESTMASTER"
547 [ -n "$DRY_RUN" ] && MAILTO=""
549 # elaborate the extra args to be passed to run_log
550 for config in ${TESTCONFIG} ; do
551 RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --config $config"
555 if [ -n "$OVERBASE" ] ; then
556 sedargs="-e s,@DATE@,${DATE},g"
557 BASE=$(echo ${OVERBASE} | sed $sedargs)
559 sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
560 BASE=$(echo ${BASE} | sed $sedargs)
563 ### elaborate mail subject
564 if [ -n "$DO_BUILD" -a -n "$DO_TEST" ] ; then
566 elif [ -n "$DO_BUILD" ] ; then
567 MAIL_SUBJECT="pkg-only"
568 elif [ -n "$DO_TEST" ] ; then
569 MAIL_SUBJECT="test-only"
571 if [ -n "$OVERBASE" ] ; then
572 MAIL_SUBJECT="${MAIL_SUBJECT} rerun"
574 MAIL_SUBJECT="${MAIL_SUBJECT} fresh"
576 short_hostname=$(hostname | cut -d. -f1)
577 MAIL_SUBJECT="on ${short_hostname} - ${MAIL_SUBJECT}"
579 ### compute WEBHOST from TESTBUILDURL
580 # this is to avoid having to change the builds configs everywhere
581 # simplistic way to extract hostname from a URL
582 WEBHOST=$(echo "$TESTBUILDURL" | cut -d/ -f 3)
584 if ! in_root_context ; then
586 echo "==================== Within vserver BEG $(date)"
588 echo "==================== Within vserver END $(date)"
592 # we run in the root context :
593 # (*) create or check for the vserver to use
594 # (*) copy this command in the vserver
597 if [ -n "$OVERBASE" ] ; then
598 ### Re-use a vserver (finish an unfinished build..)
599 if [ ! -d /vservers/${BASE} ] ; then
600 echo $COMMAND : cannot find vserver $BASE
603 # manage LOG - beware it might be a symlink so nuke it first
604 LOG=/vservers/${BASE}.log.txt
608 echo "XXXXXXXXXX $COMMAND: using existing vserver $BASE" $(date)
609 # start in case e.g. we just rebooted
610 vserver ${BASE} start || :
611 # retrieve environment from the previous run
612 FCDISTRO=$(vserver ${BASE} exec /build/getdistroname.sh)
613 BUILD_SCM_URL=$(vserver ${BASE} exec make --no-print-directory -C /build stage1=skip +build-SVNPATH +build-GITPATH)
614 # for efficiency, crop everything in one make run
615 tmp=/tmp/${BASE}-env.sh
616 vserver ${BASE} exec make --no-print-directory -C /build stage1=skip \
617 ++PLDISTRO ++PLDISTROTAGS ++PERSONALITY ++MAILTO ++WEBPATH ++TESTBUILDURL ++WEBROOT > $tmp
621 [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
622 if echo $BUILD_SCM_URL | grep -q git ; then
623 vserver $BASE exec bash -c "cd /build; git pull; make tests-clean"
625 vserver $BASE exec svn update /build
627 # make sure we refresh the tests place in case it has changed
628 rm -f /build/MODULES/tests
629 options=(${options[@]} -d $PLDISTRO -t $PLDISTROTAGS -s $BUILD_SCM_URL)
630 [ -n "$PERSONALITY" ] && options=(${options[@]} -p $PERSONALITY)
631 [ -n "$MAILTO" ] && options=(${options[@]} -m $MAILTO)
632 [ -n "$WEBPATH" ] && options=(${options[@]} -w $WEBPATH)
633 [ -n "$TESTBUILDURL" ] && options=(${options[@]} -W $TESTBUILDURL)
634 [ -n "$WEBROOT" ] && options=(${options[@]} -r $WEBROOT)
637 # create vserver: check it does not exist yet
639 while [ -d /vservers/${BASE}${i} ] ; do
640 # we name subsequent builds <base>-n<i> so the logs and builds get sorted properly
641 [ -z ${i} ] && BASE=${BASE}-n
643 if [ $i -gt 100 ] ; then
644 echo "$COMMAND: Failed to create build vserver /vservers/${BASE}${i}"
650 # manage LOG - beware it might be a symlink so nuke it first
651 LOG=/vservers/${BASE}.log.txt
655 echo "XXXXXXXXXX $COMMAND: creating vserver $BASE" $(date)
658 ### extract the whole build - much simpler
659 tmpdir=/tmp/$COMMAND-$$
660 if echo $BUILD_SCM_URL | grep -q git ; then
661 GIT_REPO=$(echo $BUILD_SCM_URL | cut -d@ -f1)
662 GIT_TAG=$(echo $BUILD_SCM_URL | cut -s -d@ -f2)
663 GIT_TAG=${GIT_TAG:-master}
664 mkdir -p $tmpdir; git archive --remote=$GIT_REPO $GIT_TAG | tar -C $tmpdir -xf -
666 svn export $BUILD_SCM_URL $tmpdir
670 ./vbuild-init-vserver.sh $VERBOSE -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} -i ${IFNAME} ${PREINSTALLED} ${BASE}
674 # Extract build again - in the vserver
675 [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
676 if echo $BUILD_SCM_URL | grep -q git ; then
677 vserver $BASE exec bash -c "git clone $GIT_REPO /build; cd /build; git checkout $GIT_TAG"
679 vserver $BASE exec svn checkout ${BUILD_SCM_URL} /build
682 # install ssh key in vserver
683 echo "XXXXXXXXXX $COMMAND: preparation of vserver $BASE done" $(date)
685 # The log inside the vserver contains everything
686 LOG2=/vservers/${BASE}/log.txt
687 (echo "==================== BEG VSERVER Transcript of vserver creation" ; \
689 echo "==================== END VSERVER Transcript of vserver creation" ; \
690 echo "xxxxxxxxxx Messing with logs, symlinking $LOG2 to $LOG" ) >> $LOG2
691 ### not too nice : nuke the former log, symlink it to the new one
692 rm $LOG; ln -s $LOG2 $LOG
697 sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
698 WEBPATH=$(echo ${WEBPATH} | sed $sedargs)
699 webpublish mkdir -p ${WEBPATH}
701 # where to store the log for web access
702 WEBBASE=${WEBPATH}/${BASE}
703 WEBLOG=${WEBPATH}/${BASE}/log.txt
704 # compute the log URL - inserted in the mail messages for convenience
705 WEBBASE_URL=$(echo $WEBBASE | sed -e "s,//,/,g" -e "s,${WEBROOT},${TESTBUILDURL},")
707 if [ -n "$DO_BUILD" ] ; then
709 # invoke this command into the build directory of the vserver
710 cp $COMMANDPATH /vservers/${BASE}/build/
712 # invoke this command in the vserver for building (-T)
713 vserver ${BASE} exec chmod +x /build/$COMMAND
714 vserver ${BASE} exec /build/$COMMAND "${options[@]}" -b "${BASE}" "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
717 # publish to the web so run_log can find them
719 webpublish rm -rf $WEBPATH/$BASE
720 # guess if we've been doing any debian-related build
721 if [ ! -f /vservers/$BASE/etc/debian_version ] ; then
722 webpublish mkdir -p $WEBPATH/$BASE/{RPMS,SRPMS}
723 webpublish_rsync_dir $WEBPATH/$BASE/RPMS/ /vservers/$BASE/build/RPMS/
724 [[ -n "$PUBLISH_SRPMS" ]] && webpublish_rsync_dir $WEBPATH/$BASE/SRPMS/ /vservers/$BASE/build/SRPMS/
726 # run scanpackages so we can use apt-get on this
727 # (not needed on fedora b/c this is done by the regular build already)
728 vserver $BASE exec bash -c "(cd /build ; dpkg-scanpackages DEBIAN/ | gzip -9c > Packages.gz)"
729 webpublish mkdir -p $WEBPATH/$BASE/DEBIAN
730 webpublish_rsync_files $WEBPATH/$BASE/DEBIAN/ /vservers/$BASE/build/DEBIAN/*.deb
731 webpublish_rsync_files $WEBPATH/$BASE/ /vservers/$BASE/build/Packages.gz
733 # publish myplc-release if this exists
734 release=/vservers/$BASE/build/myplc-release
735 [ -f $release ] && webpublish_rsync_files $WEBPATH/$BASE $release
738 # create yum repo and sign packages.
739 if [ -n "$SIGNYUMREPO" ] ; then
740 # this script does not yet support signing on a remote (webhost) repo
741 sign_here=$(hostname) ; sign_web=$(webpublish hostname)
742 if [ "$hostname" = "$sign_here" ] ; then
745 echo "$COMMAND does not support signing on a remote yum repo"
746 echo "you might want to turn off the -y option, or run this on the web server box itself"
751 if [ -n "$DO_TEST" ] ; then
757 echo "==================== MAIN END $(date)"