2 REVISION=$(echo '$Revision$' | sed -e 's,\$,,g' -e 's,^\w*:\s,,' )
7 # default values, tunable with command-line options
8 DEFAULT_FCDISTRO=centos5
9 DEFAULT_PLDISTRO=planetlab
10 DEFAULT_PERSONALITY=linux32
11 DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
12 DEFAULT_build_SVNPATH="http://svn.planet-lab.org/svn/build/trunk"
15 # default gpg path used in signing yum repo
16 DEFAULT_GPGPATH="/etc/planetlab"
17 # default email to use in gpg secring
18 DEFAULT_GPGUID="root@$( /bin/hostname )"
20 DEFAULT_TESTCONFIG="default"
22 # for publishing results, and the tests settings
24 y=$(hostname|sed -e s,inria,,)
26 if [ "$x" != "$y" ] ; then
27 DEFAULT_WEBPATH="/build/@PLDISTRO@/"
28 DEFAULT_TESTBUILDURL="http://build.onelab.eu/"
29 # this is where the buildurl is pointing towards
30 DEFAULT_WEBROOT="/build/"
31 DEFAULT_TESTMASTER="testmaster.onelab.eu"
33 DEFAULT_WEBPATH="/build/@FCDISTRO@/@PLDISTRO@/"
34 DEFAULT_TESTBUILDURL="http://build.planet-lab.org/"
35 # this is where the buildurl is pointing towards
36 DEFAULT_WEBROOT="/build/"
37 DEFAULT_TESTMASTER="manager.test.planet-lab.org"
41 # assuming vserver runs in UTC
42 DATE=$(date +'%Y.%m.%d')
44 # temporary - wrap a quick summary of suspicious stuff
45 # this is to focus on installation that go wrong
46 # use with care, a *lot* of other things can go bad as well
49 echo "******************** BEG SUMMARY"
52 # read a full log and tries to extract the interesting stuff
55 m_show_line=re.compile(".* BEG (RPM|VSERVER).*|.*'boot'.*|\* .*| \* .*|.*is not installed.*|.*PROPFIND.*|.*Starting.*:run_log.*")
56 m_installing_any=re.compile('\r (Installing:[^\]]*]) ')
57 m_installing_err=re.compile('\r (Installing:[^\]]*])(..+)')
58 m_installing_end=re.compile('Installed:.*')
59 m_installing_doc1=re.compile("(.*)install-info: No such file or directory for /usr/share/info/\S+(.*)")
60 m_installing_doc2=re.compile("(.*)grep: /usr/share/info/dir: No such file or directory(.*)")
62 def summary (filename):
71 for line in f.xreadlines():
72 # first off : discard warnings related to doc
73 if m_installing_doc1.match(line):
74 (begin,end)=m_installing_doc1.match(line).groups()
76 if m_installing_doc2.match(line):
77 (begin,end)=m_installing_doc2.match(line).groups()
79 # unconditionnally show these lines
80 if m_show_line.match(line):
82 # an 'installing' line with messages afterwards : needs to be echoed
83 elif m_installing_err.match(line):
84 (installing,error)=m_installing_err.match(line).groups()
85 print '>>>',installing
88 # closing an 'installing' section
89 elif m_installing_end.match(line):
91 # any 'installing' line
92 elif m_installing_any.match(line):
94 installing=m_installing_any.match(line).group(1)
95 print '>>>',installing
97 # print lines when echo is true
99 if echo: print '>>>',line,
102 print 'Failed to analyze',filename
104 for arg in sys.argv[1:]:
107 echo "******************** END SUMMARY"
110 ### we might build on a box other than the actual web server
111 # utilities for handling the pushed material (rpms, logfiles, ...)
112 function webpublish_misses_dir () { ssh root@${WEBHOST} "bash -c \"test \! -d $1\"" ; }
113 function webpublish_remote () { ssh root@${WEBHOST} "$@" ; }
114 function webpublish_mkdir () { webpublish_remote mkdir "$@" ; }
115 function webpublish_rm () { webpublish_remote rm "$@" ; }
116 function webpublish_rsync_dir () { rsync --archive --delete $VERBOSE $1 root@${WEBHOST}:$2 ; }
117 function webpublish_rsync_file () { rsync $VERBOSE $1 root@${WEBHOST}:$2 ; }
118 function webpublish_cp_local_to_remote () { scp $1 root@${WEBHOST}:$2 ; }
119 function webpublish_cp_stdin_to_file () { ssh root@${WEBHOST} cat \> $1; }
120 function webpublish_append_stdin_to_file () { ssh root@${WEBHOST} cat \>\> $1; }
122 # Notify recipient of failure or success, manage various stamps
125 # early stage ? - let's not create /build/@PLDISTRO@
126 if webpublish_misses_dir ${WEBPATH} ; then
129 WEBLOG=/tmp/vbuild-early.log.txt
131 webpublish_cp_local_to_remote $LOG ${WEBLOG}
132 summary $LOG | webpublish_append_stdin_to_file ${WEBLOG}
133 (echo -n "============================== $COMMAND: failure at " ; date ; \
134 webpublish_remote tail --lines=1000 $WEBLOG) | \
135 webpublish_cp_stdin_to_file ${WEBLOG}.ko
136 if [ -n "$MAILTO" ] ; then
138 echo "See full build log at ${LOG_URL}" ; \
139 echo "and tail version at ${LOG_URL}.ko" ; \
140 echo "See complete set of testlogs at ${TESTLOGS_URL}" ; \
141 webpublish_remote tail --lines=1000 ${WEBLOG} ) | \
142 mail -s "Failures with ${MAIL_SUBJECT} ${BASE} on $(hostname)" $MAILTO
147 function success () {
149 # early stage ? - let's not create /build/@PLDISTRO@
150 if webpublish_misses_dir ${WEBPATH} ; then
153 WEBLOG=/tmp/vbuild-early-$(date +%Y-%m-%d).log.txt
155 webpublish_cp_local_to_remote $LOG ${WEBLOG}
156 summary $LOG | webpublish_append_stdin_to_file ${WEBLOG}
157 if [ -n "$DO_TEST" ] ; then
159 echo "Successfully built and tested" ; \
160 echo "See full build log at ${LOG_URL}" ; \
161 echo "See complete set of testlogs at ${TESTLOGS_URL}" ; \
162 ) | webpublish_cp_stdin_to_file ${WEBLOG}.pass
163 webpublish_rm -f ${WEBLOG}.pkg-ok ${WEBLOG}.ko
166 echo "Successful package-only build, no test requested" ; \
167 echo "See full build log at ${LOG_URL}" ; \
168 ) | webpublish_cp_stdin_to_file ${WEBLOG}.pkg-ok
169 webpublish_rm -f ${WEBLOG}.ko
171 if [ -n "$MAILTO" ] ; then
173 echo "$PLDISTRO ($BASE) build for $FCDISTRO completed on $(date)" ; \
174 echo "See full build log at ${LOG_URL}" ; \
175 [ -n "$DO_TEST" ] && echo "See complete set of testlogs at ${TESTLOGS_URL}" ) \
176 | mail -s "Success with ${MAIL_SUBJECT} ${BASE} on $(hostname)" $MAILTO
178 # XXX For some reason, we haven't been getting this email for successful builds. If this sleep
179 # doesn't fix the problem, I'll remove it -- Sapan.
184 # run in the vserver - do not manage success/failure, will be done from the root ctx
189 echo -n "============================== Starting $COMMAND:build on "
195 echo "Running make IN $(pwd)"
197 # stuff our own variable settings
198 MAKEVARS=("PLDISTRO=${PLDISTRO}" "${MAKEVARS[@]}")
199 MAKEVARS=("PLDISTROTAGS=${PLDISTROTAGS}" "${MAKEVARS[@]}")
200 MAKEVARS=("build-SVNPATH=${build_SVNPATH}" "${MAKEVARS[@]}")
201 MAKEVARS=("PERSONALITY=${PERSONALITY}" "${MAKEVARS[@]}")
202 MAKEVARS=("MAILTO=${MAILTO}" "${MAKEVARS[@]}")
203 MAKEVARS=("WEBPATH=${WEBPATH}" "${MAKEVARS[@]}")
204 MAKEVARS=("TESTBUILDURL=${TESTBUILDURL}" "${MAKEVARS[@]}")
205 MAKEVARS=("WEBROOT=${WEBROOT}" "${MAKEVARS[@]}")
207 MAKEVARS=("BASE=${BASE}" "${MAKEVARS[@]}")
210 make -C /build $DRY_RUN "${MAKEVARS[@]}" stage1=true
211 # store tests_svnpath
212 make -C /build $DRY_RUN "${MAKEVARS[@]}" stage1=true tests_svnpath
214 make -C /build $DRY_RUN "${MAKEVARS[@]}" versions
216 make -C /build $DRY_RUN "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
220 # this was formerly run in the myplc-devel chroot but now is run in the root context,
221 # this is so that the .ssh config gets done manually, and once and for all
222 function run_log () {
227 echo -n "============================== Starting $COMMAND:run_log on $(date)"
229 # where to find TESTS_SVNPATH
230 stamp=/vservers/$BASE/build/tests_svnpath
231 if [ ! -f $stamp ] ; then
232 echo "$COMMAND: Cannot figure TESTS_SVNPATH from missing $stamp"
236 TESTS_SVNPATH=$(cat $stamp)
237 # don't need the tests fulltree anymore
238 TESTS_SYSTEM_SVNPATH=${TESTS_SVNPATH}/system
240 ### the URL to the RPMS/<arch> location
241 # f12 now has everything in i686; try i386 first as older fedoras have both
243 for a in i386 i686 x86_64; do
244 archdir=/vservers/$BASE/build/RPMS/$a
245 if [ -d $archdir ] ; then
246 # where was that installed
247 url=$(echo $archdir | sed -e "s,/vservers/${BASE}/build,${WEBPATH}/${BASE},")
248 url=$(echo $url | sed -e "s,${WEBROOT},${TESTBUILDURL},")
253 if [ -z "$url" ] ; then
254 echo "$COMMAND: Cannot locate arch URL for testing"
259 testmaster_ssh="root@${TESTMASTER}"
261 # test directory name on test box
264 ssh -n ${testmaster_ssh} rm -rf ${testdir}
266 ssh -n ${testmaster_ssh} svn co ${TESTS_SYSTEM_SVNPATH} ${testdir}
267 ### # check out the entire tests/ module (with system/ duplicated) as a subdir - see fulltree above
268 ### ssh -n ${testmaster_ssh} svn co ${TESTS_SVNPATH} ${testdir}/tests
269 # invoke test on testbox - pass url and build url - so the tests can use vtest-init-vserver.sh
271 for config in ${TESTCONFIG} ; do
272 configs="$configs --config $config"
274 test_env="-p $PERSONALITY -d $PLDISTRO -f $FCDISTRO"
276 # need to proceed despite of set -e
278 ssh 2>&1 -n ${testmaster_ssh} ${testdir}/run_log --build ${build_SVNPATH} --url ${url} $configs $test_env $VERBOSE --all || success=
280 # gather logs in the vserver
281 mkdir -p /vservers/$BASE/build/testlogs
282 ssh 2>&1 -n ${testmaster_ssh} tar -C ${testdir}/logs -cf - . | tar -C /vservers/$BASE/build/testlogs -xf - || true
283 # push them to the build web
284 chmod -R a+r /vservers/$BASE/build/testlogs/
285 webpublish_rsync_dir /vservers/$BASE/build/testlogs/ $WEBPATH/$BASE/testlogs/
287 if [ -z "$success" ] ; then
291 echo -n "============================== End $COMMAND:run_log on $(date)"
294 function in_root_context () {
295 rpm -q util-vserver > /dev/null
298 # this part won't work if WEBHOST does not match the local host
299 # would need to be made webpublish_* compliant
300 # but do we really need this feature anyway ?
301 function sign_node_packages () {
303 echo "Signing node packages"
307 repository=$WEBPATH/$BASE/RPMS/
308 # the rpms that need signing
310 # and the corresponding stamps
313 for package in $(find $repository/ -name '*.rpm') ; do
314 stamp=$repository/signed-stamps/$(basename $package).signed
315 # If package is newer than signature stamp
316 if [ $package -nt $stamp ] ; then
317 new_rpms="$new_rpms $package"
318 new_stamps="$new_stamps $stamp"
320 # Or than createrepo database
321 [ $package -nt $repository/repodata/repomd.xml ] && need_createrepo=true
324 if [ -n "$new_rpms" ] ; then
325 # Create a stamp once the package gets signed
326 mkdir $repository/signed-stamps 2> /dev/null
328 # Sign RPMS. setsid detaches rpm from the terminal,
329 # allowing the (hopefully blank) GPG password to be
330 # entered from stdin instead of /dev/tty.
332 --define "_signature gpg" \
333 --define "_gpg_path $GPGPATH" \
334 --define "_gpg_name $GPGUID" \
335 --resign $new_rpms && touch $new_stamps
338 # Update repository index / yum metadata.
339 if [ -n "$need_createrepo" ] ; then
340 echo "Indexing node packages after signing"
341 if [ -f $repository/yumgroups.xml ] ; then
342 createrepo --quiet -g yumgroups.xml $repository
344 createrepo --quiet $repository
349 function show_env () {
351 echo FCDISTRO=$FCDISTRO
352 echo PLDISTRO=$PLDISTRO
353 echo PERSONALITY=$PERSONALITY
355 echo build_SVNPATH=$build_SVNPATH
356 echo MAKEVARS="${MAKEVARS[@]}"
357 echo DRY_RUN="$DRY_RUN"
358 echo PLDISTROTAGS="$PLDISTROTAGS"
359 # this does not help, it's not yet set when we run show_env
360 #echo WEBPATH="$WEBPATH"
361 echo TESTBUILDURL="$TESTBUILDURL"
362 echo WEBHOST="$WEBHOST"
363 if in_root_context ; then
364 echo PLDISTROTAGS="$PLDISTROTAGS"
366 if [ -f /build/$PLDISTROTAGS ] ; then
367 echo "XXXXXXXXXXXXXXXXXXXX Contents of tags definition file /build/$PLDISTROTAGS"
368 cat /build/$PLDISTROTAGS
369 echo "XXXXXXXXXXXXXXXXXXXX end tags definition"
371 echo "XXXXXXXXXXXXXXXXXXXX Cannot find tags definition file /build/$PLDISTROTAGS, assuming remote pldistro"
377 function setupssh () {
381 if [ -f ${sshkey} ] ; then
382 SSHDIR=/vservers/${base}/root/.ssh
384 cp $sshkey ${SSHDIR}/thekey
386 echo " IdentityFile ~/.ssh/thekey"; \
387 echo " StrictHostKeyChecking no" ) > ${SSHDIR}/config
389 chmod 400 ${SSHDIR}/*
391 echo "WARNING : could not find provided ssh key $sshkey - ignored"
396 echo "Usage: $COMMAND [option] [var=value...] make-targets"
397 echo "This is $REVISION"
398 echo "Supported options"
399 echo " -f fcdistro - defaults to $DEFAULT_FCDISTRO"
400 echo " -d pldistro - defaults to $DEFAULT_PLDISTRO"
401 echo " -p personality - defaults to $DEFAULT_PERSONALITY"
402 echo " -m mailto - no default"
403 echo " -s svnpath - where to fetch the build module - defaults to $DEFAULT_build_SVNPATH"
404 echo " -t pldistrotags - defaults to \${PLDISTRO}-tags.mk"
405 echo " -b base - defaults to $DEFAULT_BASE"
406 echo " @NAME@ replaced as appropriate"
407 echo " -o base: (overwrite) do not re-create vserver, re-use base instead"
408 echo " the -f/-d/-p/-m/-s/-t options are uneffective in this case"
409 echo " -c testconfig - defaults to $DEFAULT_TESTCONFIG"
410 echo " -w webpath - defaults to $DEFAULT_WEBPATH"
411 echo " -W testbuildurl - defaults to $DEFAULT_TESTBUILDURL; this is also used to get the hostname where to publish builds"
412 echo " -r webroot - defaults to $DEFAULT_WEBROOT - the fs point where testbuildurl actually sits"
413 echo " -M testmaster - defaults to $DEFAULT_TESTMASTER"
414 echo " -y - sign yum repo in webpath"
415 echo " -g gpg_path - to the gpg secring used to sign rpms. Defaults to $DEFAULT_GPGPATH"
416 echo " -u gpg_uid - email used in secring. Defaults to $DEFAULT_GPGUID"
417 echo " -K svnsshkey - specify key to use when svn+ssh:// URLs are used for SVNPATH"
418 echo " -S - do not publish source rpms"
419 echo " -B - run build only"
420 echo " -T - run test only"
421 echo " -n - dry-run: -n passed to make - vserver gets created though - no mail sent"
422 echo " -v - be verbose"
423 echo " -7 - uses weekday-@FCDISTRO@ as base"
424 echo " -i ifname - defaults to $DEFAULT_IFNAME - used to determine local IP"
441 while getopts "f:d:p:m:s:t:b:o:c:w:W:r:M:yg:u:K:SBTnv7i:" opt ; do
443 f) FCDISTRO=$OPTARG ;;
444 d) PLDISTRO=$OPTARG ;;
445 p) PERSONALITY=$OPTARG ;;
447 s) build_SVNPATH=$OPTARG ;;
448 t) PLDISTROTAGS=$OPTARG ;;
450 o) OVERBASE=$OPTARG ;;
451 c) TESTCONFIG="$TESTCONFIG $OPTARG" ;;
452 w) WEBPATH=$OPTARG ;;
453 W) TESTBUILDURL=$OPTARG ;;
454 r) WEBROOT=$OPTARG ;;
455 M) TESTMASTER=$OPTARG ;;
456 y) SIGNYUMREPO=true ;;
457 g) GPGPATH=$OPTARG ;;
459 K) SSH_KEY=$OPTARG ;;
460 S) PUBLISH_SRPMS="" ;;
464 v) set -x ; VERBOSE="-v" ;;
465 7) BASE="$(date +%a|tr A-Z a-z)-@FCDISTRO@" ;;
471 # preserve options for passing them again later, together with expanded base
473 toshift=$(($OPTIND - 1))
474 arg=1; while [ $arg -le $toshift ] ; do options=(${options[@]} "$1") ; shift; arg=$(($arg+1)) ; done
476 # allow var=value stuff;
477 for target in "$@" ; do
478 # check if contains '='
479 target1=$(echo $target | sed -e s,=,,)
480 if [ "$target" = "$target1" ] ; then
481 MAKETARGETS=(${MAKETARGETS[@]} "$target")
483 MAKEVARS=(${MAKEVARS[@]} "$target")
488 [ -z "$FCDISTRO" ] && FCDISTRO=$DEFAULT_FCDISTRO
489 [ -z "$PLDISTRO" ] && PLDISTRO=$DEFAULT_PLDISTRO
490 [ -z "$PERSONALITY" ] && PERSONALITY=$DEFAULT_PERSONALITY
491 [ -z "$PLDISTROTAGS" ] && PLDISTROTAGS="${PLDISTRO}-tags.mk"
492 [ -z "$BASE" ] && BASE="$DEFAULT_BASE"
493 [ -z "$WEBPATH" ] && WEBPATH="$DEFAULT_WEBPATH"
494 [ -z "$TESTBUILDURL" ] && TESTBUILDURL="$DEFAULT_TESTBUILDURL"
495 [ -z "$WEBROOT" ] && WEBROOT="$DEFAULT_WEBROOT"
496 [ -z "$GPGPATH" ] && GPGPATH="$DEFAULT_GPGPATH"
497 [ -z "$GPGUID" ] && GPGUID="$DEFAULT_GPGUID"
498 [ -z "$IFNAME" ] && IFNAME="$DEFAULT_IFNAME"
499 [ -z "$build_SVNPATH" ] && build_SVNPATH="$DEFAULT_build_SVNPATH"
500 [ -z "$TESTCONFIG" ] && TESTCONFIG="$DEFAULT_TESTCONFIG"
501 [ -z "$TESTMASTER" ] && TESTMASTER="$DEFAULT_TESTMASTER"
503 [ -n "$DRY_RUN" ] && MAILTO=""
505 if [ -n "$OVERBASE" ] ; then
506 sedargs="-e s,@DATE@,${DATE},g"
507 BASE=$(echo ${OVERBASE} | sed $sedargs)
509 sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
510 BASE=$(echo ${BASE} | sed $sedargs)
513 ### elaborate mail subject
514 if [ -n "$DO_BUILD" -a -n "$DO_TEST" ] ; then
515 MAIL_SUBJECT="complete"
516 elif [ -n "$DO_BUILD" ] ; then
517 MAIL_SUBJECT="package-only"
518 elif [ -n "$DO_TEST" ] ; then
519 MAIL_SUBJECT="test-only"
521 if [ -n "$OVERBASE" ] ; then
522 MAIL_SUBJECT="$MAIL_SUBJECT incremental run on"
524 MAIL_SUBJECT="$MAIL_SUBJECT fresh build"
527 ### compute WEBHOST from TESTBUILDURL
528 # this is to avoid having to change the builds configs everywhere
529 # simplistic way to extract hostname from a URL
530 WEBHOST=$(echo "$TESTBUILDURL" | cut -d/ -f 3)
532 if ! in_root_context ; then
534 echo "==================== Within vserver BEG $(date)"
536 echo "==================== Within vserver END $(date)"
540 # we run in the root context :
541 # (*) create or check for the vserver to use
542 # (*) copy this command in the vserver
545 if [ -n "$OVERBASE" ] ; then
546 ### Re-use a vserver (finish an unfinished build..)
547 if [ ! -d /vservers/${BASE} ] ; then
548 echo $COMMAND : cannot find vserver $BASE
551 # manage LOG - beware it might be a symlink so nuke it first
552 LOG=/vservers/${BASE}.log.txt
556 echo "XXXXXXXXXX $COMMAND: using existing vserver $BASE" $(date)
557 # start in case e.g. we just rebooted
558 vserver ${BASE} start || :
560 [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
561 vserver ${BASE} exec svn update /build
562 # make sure we refresh the tests place in case it has changed
563 rm -f /build/tests_svnpath
564 # get environment from the first run
565 FCDISTRO=$(vserver ${BASE} exec /build/getdistroname.sh)
566 # retrieve all in one run
567 tmp=/tmp/${BASE}-env.sh
568 vserver ${BASE} exec make --no-print-directory -C /build stage1=skip \
569 ++PLDISTRO ++PLDISTROTAGS ++PERSONALITY ++MAILTO ++WEBPATH ++TESTBUILDURL ++WEBROOT > $tmp
570 # sh vars cannot have a minus
571 echo build_SVNPATH=$(vserver ${BASE} exec make --no-print-directory -C /build stage1=skip +build-SVNPATH) >> $tmp
574 options=(${options[@]} -d $PLDISTRO -t $PLDISTROTAGS -s $build_SVNPATH)
575 [ -n "$PERSONALITY" ] && options=(${options[@]} -p $PERSONALITY)
576 [ -n "$MAILTO" ] && options=(${options[@]} -m $MAILTO)
577 [ -n "$WEBPATH" ] && options=(${options[@]} -w $WEBPATH)
578 [ -n "$TESTBUILDURL" ] && options=(${options[@]} -W $TESTBUILDURL)
579 [ -n "$WEBROOT" ] && options=(${options[@]} -r $WEBROOT)
582 # create vserver: check it does not exist yet
584 while [ -d /vservers/${BASE}${i} ] ; do
585 # we name subsequent builds <base>-n<i> so the logs and builds get sorted properly
586 [ -z ${i} ] && BASE=${BASE}-n
588 if [ $i -gt 100 ] ; then
589 echo "$COMMAND: Failed to create build vserver /vservers/${BASE}${i}"
595 # manage LOG - beware it might be a symlink so nuke it first
596 LOG=/vservers/${BASE}.log.txt
600 echo "XXXXXXXXXX $COMMAND: creating vserver $BASE" $(date)
603 ### extract the whole build - much simpler
604 tmpdir=/tmp/$COMMAND-$$
605 svn export $build_SVNPATH $tmpdir
608 ./vbuild-init-vserver.sh $VERBOSE -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} -i ${IFNAME} ${BASE}
612 # Extract build again - in the vserver
613 [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
614 vserver ${BASE} exec svn checkout ${build_SVNPATH} /build
616 # install ssh key in vserver
617 echo "XXXXXXXXXX $COMMAND: preparation of vserver $BASE done" $(date)
619 # The log inside the vserver contains everything
620 LOG2=/vservers/${BASE}/log.txt
621 (echo "==================== BEG VSERVER Transcript of vserver creation" ; \
623 echo "==================== END VSERVER Transcript of vserver creation" ; \
624 echo "xxxxxxxxxx Messing with logs, symlinking $LOG2 to $LOG" ) >> $LOG2
625 ### not too nice : nuke the former log, symlink it to the new one
626 rm $LOG; ln -s $LOG2 $LOG
631 sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
632 WEBPATH=$(echo ${WEBPATH} | sed $sedargs)
633 webpublish_mkdir -p ${WEBPATH}
635 # where to store the log for web access
636 WEBLOG=${WEBPATH}/${BASE}.log.txt
637 # compute the log URL - inserted in the mail messages for convenience
638 LOG_URL=$(echo ${WEBLOG} | sed -e "s,//,/,g" -e "s,${WEBROOT},${TESTBUILDURL},")
639 TESTLOGS_URL=$(echo ${WEBPATH}/${BASE}/testlogs | sed -e "s,//,/,g" -e "s,${WEBROOT},${TESTBUILDURL},")
641 if [ -n "$DO_BUILD" ] ; then
643 # invoke this command into the build directory of the vserver
644 cp $COMMANDPATH /vservers/${BASE}/build/
646 # invoke this command in the vserver for building (-T)
647 vserver ${BASE} exec chmod +x /build/$COMMAND
648 vserver ${BASE} exec /build/$COMMAND "${options[@]}" -b "${BASE}" "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
651 # publish to the web so run_log can find them
652 webpublish_rm -rf $WEBPATH/$BASE ; webpublish_mkdir -p $WEBPATH/$BASE/{RPMS,SRPMS}
653 webpublish_rsync_dir /vservers/$BASE/build/RPMS/ $WEBPATH/$BASE/RPMS/
654 [[ -n "$PUBLISH_SRPMS" ]] && webpublish_rsync_dir /vservers/$BASE/build/SRPMS/ $WEBPATH/$BASE/SRPMS/
655 # publish myplc-release if this exists
656 release=/vservers/$BASE/build/myplc-release
657 [ -f $release ] && webpublish_rsync_file $release $WEBPATH/$BASE
659 # create yum repo and sign packages.
660 if [ -n "$SIGNYUMREPO" ] ; then
661 # this script does not yet support signing on a remote (webhost) repo
662 sign_here=$(hostname) ; sign_web=$(webpublish_remote hostname)
663 if [ "$hostname" = "$sign_here" ] ; then
666 echo "$COMMAND does not support signing on a remote yum repo"
667 echo "you might want to turn off the -y option, or run this on the web server box itself"
672 if [ -n "$DO_TEST" ] ; then