2 REVISION=$(echo '$Revision: 18120 $' | sed -e 's,\$,,g' -e 's,^\w*:\s,,' )
7 # default values, tunable with command-line options
8 DEFAULT_FCDISTRO=centos5
9 DEFAULT_PLDISTRO=planetlab
10 DEFAULT_PERSONALITY=linux32
11 DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
12 DEFAULT_BUILD_SCM_URL="git://git.onelab.eu/build"
15 # default gpg path used in signing yum repo
16 DEFAULT_GPGPATH="/etc/planetlab"
17 # default email to use in gpg secring
18 DEFAULT_GPGUID="root@$( /bin/hostname )"
20 DEFAULT_TESTCONFIG="default"
21 # for passing args to run_log
24 # for publishing results, and the tests settings
26 y=$(hostname|sed -e s,inria,,)
28 if [ "$x" != "$y" ] ; then
29 DEFAULT_WEBPATH="/build/@PLDISTRO@/"
30 DEFAULT_TESTBUILDURL="http://build.onelab.eu/"
31 # this is where the buildurl is pointing towards
32 DEFAULT_WEBROOT="/build/"
33 DEFAULT_TESTMASTER="testmaster.onelab.eu"
35 DEFAULT_WEBPATH="/build/@FCDISTRO@/@PLDISTRO@/"
36 DEFAULT_TESTBUILDURL="http://build.planet-lab.org/"
37 # this is where the buildurl is pointing towards
38 DEFAULT_WEBROOT="/build/"
39 DEFAULT_TESTMASTER="manager.test.planet-lab.org"
43 # assuming vserver runs in UTC
44 DATE=$(date +'%Y.%m.%d')
46 # temporary - wrap a quick summary of suspicious stuff
47 # this is to focus on installation that go wrong
48 # use with care, a *lot* of other things can go bad as well
51 echo "******************** BEG SUMMARY"
54 # read a full log and tries to extract the interesting stuff
57 m_show_line=re.compile(".* (BEG|END) (RPM|VSERVER).*|.*'boot'.*|\* .*| \* .*|.*is not installed.*|.*PROPFIND.*|.* (BEG|END).*:run_log.*|.* Within vserver (BEG|END) .*|.* MAIN (BEG|END).*")
58 m_installing_any=re.compile('\r (Installing:[^\]]*]) ')
59 m_installing_err=re.compile('\r (Installing:[^\]]*])(..+)')
60 m_installing_end=re.compile('Installed:.*')
61 m_installing_doc1=re.compile("(.*)install-info: No such file or directory for /usr/share/info/\S+(.*)")
62 m_installing_doc2=re.compile("(.*)grep: /usr/share/info/dir: No such file or directory(.*)")
64 def summary (filename):
73 for line in f.xreadlines():
74 # first off : discard warnings related to doc
75 if m_installing_doc1.match(line):
76 (begin,end)=m_installing_doc1.match(line).groups()
78 if m_installing_doc2.match(line):
79 (begin,end)=m_installing_doc2.match(line).groups()
81 # unconditionnally show these lines
82 if m_show_line.match(line):
84 # an 'installing' line with messages afterwards : needs to be echoed
85 elif m_installing_err.match(line):
86 (installing,error)=m_installing_err.match(line).groups()
87 print '>>>',installing
90 # closing an 'installing' section
91 elif m_installing_end.match(line):
93 # any 'installing' line
94 elif m_installing_any.match(line):
96 installing=m_installing_any.match(line).group(1)
97 print '>>>',installing
99 # print lines when echo is true
101 if echo: print '>>>',line,
104 print 'Failed to analyze',filename
106 for arg in sys.argv[1:]:
109 echo "******************** END SUMMARY"
112 ### we might build on a box other than the actual web server
113 # utilities for handling the pushed material (rpms, logfiles, ...)
114 function webpublish_misses_dir () { ssh root@${WEBHOST} "bash -c \"test \! -d $1\"" ; }
115 function webpublish () { ssh root@${WEBHOST} "$@" ; }
116 function webpublish_rsync_dir () { rsync --archive --delete $VERBOSE $1 root@${WEBHOST}:$2 ; }
117 function webpublish_rsync_file () { rsync $VERBOSE $1 root@${WEBHOST}:$2 ; }
118 function webpublish_cp_local_to_remote () { scp $1 root@${WEBHOST}:$2 ; }
119 function webpublish_cp_stdin_to_file () { ssh root@${WEBHOST} cat \> $1; }
120 function webpublish_append_stdin_to_file () { ssh root@${WEBHOST} cat \>\> $1; }
122 # Notify recipient of failure or success, manage various stamps
125 # early stage ? - let's not create /build/@PLDISTRO@
126 if test -z "$WEBLOG" ; then
129 WEBBASE=/tmp/vbuild-early-$(date +%Y-%m-%d)
130 WEBLOG=/tmp/vbuild-early-$(date +%Y-%m-%d).log.txt
132 webpublish mkdir -p $WEBBASE ||:
133 webpublish_cp_local_to_remote $LOG $WEBLOG ||:
134 summary $LOG | webpublish_append_stdin_to_file $WEBLOG ||:
135 (echo -n "============================== $COMMAND: failure at " ; date ; \
136 webpublish tail --lines=1000 $WEBLOG) | \
137 webpublish_cp_stdin_to_file $WEBBASE.ko ||:
138 if [ -n "$MAILTO" ] ; then
140 echo "Subject: KO ${BASE} ${MAIL_SUBJECT}" ; \
141 echo "To: $MAILTO" ; \
142 echo "See full build log at $WEBBASE_URL/log.txt" ; \
143 echo "and tail version at $WEBBASE_URL.ko" ; \
144 echo "See complete set of testlogs at $WEBBASE_URL/testlogs" ; \
145 echo "........................................" ; \
146 webpublish tail --lines=1000 $WEBLOG ) | \
152 function success () {
154 # early stage ? - let's not create /build/@PLDISTRO@
155 if test -z "$WEBLOG" ; then
158 WEBLOG=/tmp/vbuild-early-$(date +%Y-%m-%d).log.txt
160 webpublish mkdir -p $WEBBASE
161 webpublish_cp_local_to_remote $LOG $WEBLOG
162 summary $LOG | webpublish_append_stdin_to_file $WEBLOG
163 if [ -n "$DO_TEST" ] ; then
165 echo "Successfully built and tested" ; \
166 echo "See full build log at $WEBBASE_URL/log.txt" ; \
167 echo "See complete set of testlogs at $WEBBASE_URL/testlogs" ; \
168 ) | webpublish_cp_stdin_to_file $WEBBASE.pass
169 webpublish rm -f $WEBBASE.pkg-ok $WEBBASE.ko
172 echo "Successful package-only build, no test requested" ; \
173 echo "See full build log at $WEBBASE_URL/log.txt" ; \
174 ) | webpublish_cp_stdin_to_file $WEBBASE.pkg-ok
175 webpublish rm -f $WEBBASE.ko
177 if [ -n "$MAILTO" ] ; then
179 echo "Subject: PASS ${BASE} ${MAIL_SUBJECT}" ; \
180 echo "To: $MAILTO" ; \
181 echo "$PLDISTRO ($BASE) build for $FCDISTRO completed on $(date)" ; \
182 echo "See full build log at $WEBBASE_URL/log.txt" ; \
183 [ -n "$DO_TEST" ] && echo "See complete set of testlogs at $WEBBASE_URL/testlogs" ) \
186 # XXX For some reason, we haven't been getting this email for successful builds. If this sleep
187 # doesn't fix the problem, I'll remove it -- Sapan.
192 # run in the vserver - do not manage success/failure, will be done from the root ctx
197 echo -n "============================== Starting $COMMAND:build on "
203 echo "Running make IN $(pwd)"
205 # stuff our own variable settings
206 if echo $BUILD_SCM_URL | grep -q git ; then
207 MAKEVARS=("build-GITPATH=${BUILD_SCM_URL}" "${MAKEVARS[@]}")
209 MAKEVARS=("build-SVNPATH=${BUILD_SCM_URL}" "${MAKEVARS[@]}")
211 MAKEVARS=("PLDISTRO=${PLDISTRO}" "${MAKEVARS[@]}")
212 MAKEVARS=("PLDISTROTAGS=${PLDISTROTAGS}" "${MAKEVARS[@]}")
213 MAKEVARS=("PERSONALITY=${PERSONALITY}" "${MAKEVARS[@]}")
214 MAKEVARS=("MAILTO=${MAILTO}" "${MAKEVARS[@]}")
215 MAKEVARS=("WEBPATH=${WEBPATH}" "${MAKEVARS[@]}")
216 MAKEVARS=("TESTBUILDURL=${TESTBUILDURL}" "${MAKEVARS[@]}")
217 MAKEVARS=("WEBROOT=${WEBROOT}" "${MAKEVARS[@]}")
219 MAKEVARS=("BASE=${BASE}" "${MAKEVARS[@]}")
222 /build/latex-first-run.sh || :
225 make -C /build $DRY_RUN "${MAKEVARS[@]}" stage1=true
227 make -C /build $DRY_RUN "${MAKEVARS[@]}" versions
229 make -C /build $DRY_RUN "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
233 # this was formerly run in the myplc-devel chroot but now is run in the root context,
234 # this is so that the .ssh config gets done manually, and once and for all
235 function run_log () {
240 echo "============================== BEG $COMMAND:run_log on $(date)"
242 ### the URL to the RPMS/<arch> location
243 # f12 now has everything in i686; try i386 first as older fedoras have both
245 for a in i386 i686 x86_64; do
246 archdir=/vservers/$BASE/build/RPMS/$a
247 if [ -d $archdir ] ; then
248 # where was that installed
249 url=$(echo $archdir | sed -e "s,/vservers/${BASE}/build,${WEBPATH}/${BASE},")
250 url=$(echo $url | sed -e "s,${WEBROOT},${TESTBUILDURL},")
255 if [ -z "$url" ] ; then
256 echo "$COMMAND: Cannot locate arch URL for testing"
261 testmaster_ssh="root@${TESTMASTER}"
263 # test directory name on test box
267 ssh -n ${testmaster_ssh} rm -rf ${testdir} ${testdir}.git
269 # check it out in the build
270 vserver $BASE exec make -C /build tests-module
272 # push it onto the testmaster - just the 'system' subdir is enough
273 rsync --verbose --archive /vservers/$BASE/build/MODULES/tests/system/ ${testmaster_ssh}:${BASE}
274 # toss the build in the bargain, so the tests don't need to mess with extracting it
275 rsync --verbose --archive /vservers/$BASE/build/MODULES/build ${testmaster_ssh}:${BASE}/
277 # invoke test on testbox - pass url and build url - so the tests can use vtest-init-vserver.sh
278 run_log_env="-p $PERSONALITY -d $PLDISTRO -f $FCDISTRO"
280 # need to proceed despite of set -e
282 # passing the build_scm_url should not be needed anymore
283 ssh 2>&1 -n ${testmaster_ssh} ${testdir}/run_log --build ${BUILD_SCM_URL} --url ${url} $run_log_env $RUN_LOG_EXTRAS $VERBOSE --all || success=
285 # gather logs in the build vserver
286 mkdir -p /vservers/$BASE/build/testlogs
287 rsync --verbose --archive ${testmaster_ssh}:$BASE/logs/ /vservers/$BASE/build/testlogs
288 # push them to the build web
289 chmod -R a+r /vservers/$BASE/build/testlogs/
290 webpublish_rsync_dir /vservers/$BASE/build/testlogs/ $WEBPATH/$BASE/testlogs/
292 echo "============================== END $COMMAND:run_log on $(date)"
294 if [ -z "$success" ] ; then
295 echo "Tests have failed - bailing out"
301 function in_root_context () {
302 rpm -q util-vserver > /dev/null
305 # this part won't work if WEBHOST does not match the local host
306 # would need to be made webpublish_* compliant
307 # but do we really need this feature anyway ?
308 function sign_node_packages () {
310 echo "Signing node packages"
314 repository=$WEBPATH/$BASE/RPMS/
315 # the rpms that need signing
317 # and the corresponding stamps
320 for package in $(find $repository/ -name '*.rpm') ; do
321 stamp=$repository/signed-stamps/$(basename $package).signed
322 # If package is newer than signature stamp
323 if [ $package -nt $stamp ] ; then
324 new_rpms="$new_rpms $package"
325 new_stamps="$new_stamps $stamp"
327 # Or than createrepo database
328 [ $package -nt $repository/repodata/repomd.xml ] && need_createrepo=true
331 if [ -n "$new_rpms" ] ; then
332 # Create a stamp once the package gets signed
333 mkdir $repository/signed-stamps 2> /dev/null
335 # Sign RPMS. setsid detaches rpm from the terminal,
336 # allowing the (hopefully blank) GPG password to be
337 # entered from stdin instead of /dev/tty.
339 --define "_signature gpg" \
340 --define "_gpg_path $GPGPATH" \
341 --define "_gpg_name $GPGUID" \
342 --resign $new_rpms && touch $new_stamps
345 # Update repository index / yum metadata.
346 if [ -n "$need_createrepo" ] ; then
347 echo "Indexing node packages after signing"
348 if [ -f $repository/yumgroups.xml ] ; then
349 createrepo --quiet -g yumgroups.xml $repository
351 createrepo --quiet $repository
356 function show_env () {
358 echo FCDISTRO=$FCDISTRO
359 echo PLDISTRO=$PLDISTRO
360 echo PERSONALITY=$PERSONALITY
362 echo BUILD_SCM_URL=$BUILD_SCM_URL
363 echo MAKEVARS="${MAKEVARS[@]}"
364 echo DRY_RUN="$DRY_RUN"
365 echo PLDISTROTAGS="$PLDISTROTAGS"
366 # this does not help, it's not yet set when we run show_env
367 #echo WEBPATH="$WEBPATH"
368 echo TESTBUILDURL="$TESTBUILDURL"
369 echo WEBHOST="$WEBHOST"
370 if in_root_context ; then
371 echo PLDISTROTAGS="$PLDISTROTAGS"
373 if [ -f /build/$PLDISTROTAGS ] ; then
374 echo "XXXXXXXXXXXXXXXXXXXX Contents of tags definition file /build/$PLDISTROTAGS"
375 cat /build/$PLDISTROTAGS
376 echo "XXXXXXXXXXXXXXXXXXXX end tags definition"
378 echo "XXXXXXXXXXXXXXXXXXXX Cannot find tags definition file /build/$PLDISTROTAGS, assuming remote pldistro"
384 function setupssh () {
388 if [ -f ${sshkey} ] ; then
389 SSHDIR=/vservers/${base}/root/.ssh
391 cp $sshkey ${SSHDIR}/thekey
393 echo " IdentityFile ~/.ssh/thekey"; \
394 echo " StrictHostKeyChecking no" ) > ${SSHDIR}/config
396 chmod 400 ${SSHDIR}/*
398 echo "WARNING : could not find provided ssh key $sshkey - ignored"
403 echo "Usage: $COMMAND [option] [var=value...] make-targets"
404 echo "This is $REVISION"
405 echo "Supported options"
406 echo " -f fcdistro - defaults to $DEFAULT_FCDISTRO"
407 echo " -d pldistro - defaults to $DEFAULT_PLDISTRO"
408 echo " -p personality - defaults to $DEFAULT_PERSONALITY"
409 echo " -m mailto - no default"
410 echo " -s build_scm_url - git or svn URL where to fetch the build module - defaults to $DEFAULT_BUILD_SCM_URL"
411 echo " define GIT tag or branch name appending @tagname to url"
412 echo " -t pldistrotags - defaults to \${PLDISTRO}-tags.mk"
413 echo " -b base - defaults to $DEFAULT_BASE"
414 echo " @NAME@ replaced as appropriate"
415 echo " -o base: (overwrite) do not re-create vserver, re-use base instead"
416 echo " the -f/-d/-p/-m/-s/-t options are uneffective in this case"
417 echo " -c testconfig - defaults to $DEFAULT_TESTCONFIG"
418 echo " -y {pl,pg} - passed to run_log"
419 echo " -x <run_log_args> - a hook to pass arguments to run_log"
420 echo " -w webpath - defaults to $DEFAULT_WEBPATH"
421 echo " -W testbuildurl - defaults to $DEFAULT_TESTBUILDURL; this is also used to get the hostname where to publish builds"
422 echo " -r webroot - defaults to $DEFAULT_WEBROOT - the fs point where testbuildurl actually sits"
423 echo " -M testmaster - defaults to $DEFAULT_TESTMASTER"
424 echo " -Y - sign yum repo in webpath"
425 echo " -g gpg_path - to the gpg secring used to sign rpms. Defaults to $DEFAULT_GPGPATH"
426 echo " -u gpg_uid - email used in secring. Defaults to $DEFAULT_GPGUID"
427 echo " -K svnsshkey - specify key to use when svn+ssh:// URLs are used for SVNPATH"
428 echo " -S - do not publish source rpms"
429 echo " -B - run build only"
430 echo " -T - run test only"
431 echo " -n - dry-run: -n passed to make - vserver gets created though - no mail sent"
432 echo " -v - be verbose"
433 echo " -7 - uses weekday-@FCDISTRO@ as base"
434 echo " -i ifname - defaults to $DEFAULT_IFNAME - used to determine local IP"
435 echo " --build-branch branch - build using the branch from build module"
454 OPTS=$(getopt -o "f:d:p:m:s:t:b:o:c:y:x:w:W:r:M:Yg:u:K:SBTnv7i:h" -l "build-branch:" -- $@)
462 -f) FCDISTRO=$2; shift 2 ;;
463 -d) PLDISTRO=$2; shift 2 ;;
464 -p) PERSONALITY=$2; shift 2 ;;
465 -m) MAILTO=$2; shift 2 ;;
466 -s) BUILD_SCM_URL=$2; shift 2 ;;
467 -t) PLDISTROTAGS=$2; shift 2 ;;
468 -b) BASE=$2; shift 2 ;;
469 -o) OVERBASE=$2; shift 2 ;;
470 -c) TESTCONFIG="$TESTCONFIG $2"; shift 2 ;;
471 -y) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS -y $2"; shift 2 ;;
472 -x) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS $2"; shift 2;;
473 -w) WEBPATH=$2; shift 2 ;;
474 -W) TESTBUILDURL=$2; shift 2 ;;
475 -r) WEBROOT=$2; shift 2 ;;
476 -M) TESTMASTER=$2; shift 2 ;;
477 -Y) SIGNYUMREPO=true; shift ;;
478 -g) GPGPATH=$2; shift 2 ;;
479 -u) GPGUID=$2; shift 2 ;;
480 -K) SSH_KEY=$2; shift 2 ;;
481 -S) PUBLISH_SRPMS="" ; shift ;;
482 -B) DO_TEST= ; shift ;;
483 -T) DO_BUILD= ; shift;;
484 -n) DRY_RUN="-n" ; shift ;;
485 -v) set -x ; VERBOSE="-v" ; shift ;;
486 -7) BASE="$(date +%a|tr A-Z a-z)-@FCDISTRO@" ; shift ;;
487 -i) IFNAME=$2; shift 2 ;;
493 # preserve options for passing them again later, together with expanded base
496 # allow var=value stuff;
497 for target in "$@" ; do
498 # check if contains '='
499 target1=$(echo $target | sed -e s,=,,)
500 if [ "$target" = "$target1" ] ; then
501 MAKETARGETS=(${MAKETARGETS[@]} "$target")
503 MAKEVARS=(${MAKEVARS[@]} "$target")
508 [ -z "$FCDISTRO" ] && FCDISTRO=$DEFAULT_FCDISTRO
509 [ -z "$PLDISTRO" ] && PLDISTRO=$DEFAULT_PLDISTRO
510 [ -z "$PERSONALITY" ] && PERSONALITY=$DEFAULT_PERSONALITY
511 [ -z "$PLDISTROTAGS" ] && PLDISTROTAGS="${PLDISTRO}-tags.mk"
512 [ -z "$BASE" ] && BASE="$DEFAULT_BASE"
513 [ -z "$WEBPATH" ] && WEBPATH="$DEFAULT_WEBPATH"
514 [ -z "$TESTBUILDURL" ] && TESTBUILDURL="$DEFAULT_TESTBUILDURL"
515 [ -z "$WEBROOT" ] && WEBROOT="$DEFAULT_WEBROOT"
516 [ -z "$GPGPATH" ] && GPGPATH="$DEFAULT_GPGPATH"
517 [ -z "$GPGUID" ] && GPGUID="$DEFAULT_GPGUID"
518 [ -z "$IFNAME" ] && IFNAME="$DEFAULT_IFNAME"
519 [ -z "$BUILD_SCM_URL" ] && BUILD_SCM_URL="$DEFAULT_BUILD_SCM_URL"
520 [ -z "$TESTCONFIG" ] && TESTCONFIG="$DEFAULT_TESTCONFIG"
521 [ -z "$TESTMASTER" ] && TESTMASTER="$DEFAULT_TESTMASTER"
523 [ -n "$DRY_RUN" ] && MAILTO=""
525 # elaborate the extra args to be passed to run_log
526 for config in ${TESTCONFIG} ; do
527 RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --config $config"
531 if [ -n "$OVERBASE" ] ; then
532 sedargs="-e s,@DATE@,${DATE},g"
533 BASE=$(echo ${OVERBASE} | sed $sedargs)
535 sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
536 BASE=$(echo ${BASE} | sed $sedargs)
539 ### elaborate mail subject
540 if [ -n "$DO_BUILD" -a -n "$DO_TEST" ] ; then
542 elif [ -n "$DO_BUILD" ] ; then
543 MAIL_SUBJECT="pkg-only"
544 elif [ -n "$DO_TEST" ] ; then
545 MAIL_SUBJECT="test-only"
547 if [ -n "$OVERBASE" ] ; then
548 MAIL_SUBJECT="${MAIL_SUBJECT} rerun"
550 MAIL_SUBJECT="${MAIL_SUBJECT} fresh"
552 short_hostname=$(hostname | cut -d. -f1)
553 MAIL_SUBJECT="on ${short_hostname} - ${MAIL_SUBJECT}"
555 ### compute WEBHOST from TESTBUILDURL
556 # this is to avoid having to change the builds configs everywhere
557 # simplistic way to extract hostname from a URL
558 WEBHOST=$(echo "$TESTBUILDURL" | cut -d/ -f 3)
560 if ! in_root_context ; then
562 echo "==================== Within vserver BEG $(date)"
564 echo "==================== Within vserver END $(date)"
568 # we run in the root context :
569 # (*) create or check for the vserver to use
570 # (*) copy this command in the vserver
573 if [ -n "$OVERBASE" ] ; then
574 ### Re-use a vserver (finish an unfinished build..)
575 if [ ! -d /vservers/${BASE} ] ; then
576 echo $COMMAND : cannot find vserver $BASE
579 # manage LOG - beware it might be a symlink so nuke it first
580 LOG=/vservers/${BASE}.log.txt
584 echo "XXXXXXXXXX $COMMAND: using existing vserver $BASE" $(date)
585 # start in case e.g. we just rebooted
586 vserver ${BASE} start || :
587 # retrieve environment from the previous run
588 FCDISTRO=$(vserver ${BASE} exec /build/getdistroname.sh)
589 BUILD_SCM_URL=$(vserver ${BASE} exec make --no-print-directory -C /build stage1=skip +build-SVNPATH +build-GITPATH)
590 # for efficiency, crop everything in one make run
591 tmp=/tmp/${BASE}-env.sh
592 vserver ${BASE} exec make --no-print-directory -C /build stage1=skip \
593 ++PLDISTRO ++PLDISTROTAGS ++PERSONALITY ++MAILTO ++WEBPATH ++TESTBUILDURL ++WEBROOT > $tmp
597 [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
598 if echo $BUILD_SCM_URL | grep -q git ; then
599 vserver $BASE exec bash -c "cd /build; git pull; make tests-clean"
601 vserver $BASE exec svn update /build
603 # make sure we refresh the tests place in case it has changed
604 rm -f /build/MODULES/tests
605 options=(${options[@]} -d $PLDISTRO -t $PLDISTROTAGS -s $BUILD_SCM_URL)
606 [ -n "$PERSONALITY" ] && options=(${options[@]} -p $PERSONALITY)
607 [ -n "$MAILTO" ] && options=(${options[@]} -m $MAILTO)
608 [ -n "$WEBPATH" ] && options=(${options[@]} -w $WEBPATH)
609 [ -n "$TESTBUILDURL" ] && options=(${options[@]} -W $TESTBUILDURL)
610 [ -n "$WEBROOT" ] && options=(${options[@]} -r $WEBROOT)
613 # create vserver: check it does not exist yet
615 while [ -d /vservers/${BASE}${i} ] ; do
616 # we name subsequent builds <base>-n<i> so the logs and builds get sorted properly
617 [ -z ${i} ] && BASE=${BASE}-n
619 if [ $i -gt 100 ] ; then
620 echo "$COMMAND: Failed to create build vserver /vservers/${BASE}${i}"
626 # manage LOG - beware it might be a symlink so nuke it first
627 LOG=/vservers/${BASE}.log.txt
631 echo "XXXXXXXXXX $COMMAND: creating vserver $BASE" $(date)
634 ### extract the whole build - much simpler
635 tmpdir=/tmp/$COMMAND-$$
636 if echo $BUILD_SCM_URL | grep -q git ; then
637 GIT_REPO=$(echo $BUILD_SCM_URL | cut -d@ -f1)
638 GIT_TAG=$(echo $BUILD_SCM_URL | cut -s -d@ -f2)
639 GIT_TAG=${GIT_TAG:-master}
640 mkdir -p $tmpdir; git archive --remote=$GIT_REPO $GIT_TAG | tar -C $tmpdir -xf -
642 svn export $BUILD_SCM_URL $tmpdir
646 ./vbuild-init-vserver.sh $VERBOSE -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} -i ${IFNAME} ${BASE}
650 # Extract build again - in the vserver
651 [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
652 if echo $BUILD_SCM_URL | grep -q git ; then
653 vserver $BASE exec bash -c "git clone $GIT_REPO /build; cd /build; git checkout $GIT_TAG"
655 vserver $BASE exec svn checkout ${BUILD_SCM_URL} /build
658 # install ssh key in vserver
659 echo "XXXXXXXXXX $COMMAND: preparation of vserver $BASE done" $(date)
661 # The log inside the vserver contains everything
662 LOG2=/vservers/${BASE}/log.txt
663 (echo "==================== BEG VSERVER Transcript of vserver creation" ; \
665 echo "==================== END VSERVER Transcript of vserver creation" ; \
666 echo "xxxxxxxxxx Messing with logs, symlinking $LOG2 to $LOG" ) >> $LOG2
667 ### not too nice : nuke the former log, symlink it to the new one
668 rm $LOG; ln -s $LOG2 $LOG
673 sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
674 WEBPATH=$(echo ${WEBPATH} | sed $sedargs)
675 webpublish mkdir -p ${WEBPATH}
677 # where to store the log for web access
678 WEBBASE=${WEBPATH}/${BASE}
679 WEBLOG=${WEBPATH}/${BASE}/log.txt
680 # compute the log URL - inserted in the mail messages for convenience
681 WEBBASE_URL=$(echo $WEBBASE | sed -e "s,//,/,g" -e "s,${WEBROOT},${TESTBUILDURL},")
683 if [ -n "$DO_BUILD" ] ; then
685 # invoke this command into the build directory of the vserver
686 cp $COMMANDPATH /vservers/${BASE}/build/
688 # invoke this command in the vserver for building (-T)
689 vserver ${BASE} exec chmod +x /build/$COMMAND
690 vserver ${BASE} exec /build/$COMMAND "${options[@]}" -b "${BASE}" "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
693 # publish to the web so run_log can find them
695 webpublish rm -rf $WEBPATH/$BASE
696 webpublish mkdir -p $WEBPATH/$BASE/{RPMS,SRPMS}
697 webpublish_rsync_dir /vservers/$BASE/build/RPMS/ $WEBPATH/$BASE/RPMS/
698 [[ -n "$PUBLISH_SRPMS" ]] && webpublish_rsync_dir /vservers/$BASE/build/SRPMS/ $WEBPATH/$BASE/SRPMS/
699 # publish myplc-release if this exists
700 release=/vservers/$BASE/build/myplc-release
701 [ -f $release ] && webpublish_rsync_file $release $WEBPATH/$BASE
704 # create yum repo and sign packages.
705 if [ -n "$SIGNYUMREPO" ] ; then
706 # this script does not yet support signing on a remote (webhost) repo
707 sign_here=$(hostname) ; sign_web=$(webpublish hostname)
708 if [ "$hostname" = "$sign_here" ] ; then
711 echo "$COMMAND does not support signing on a remote yum repo"
712 echo "you might want to turn off the -y option, or run this on the web server box itself"
717 if [ -n "$DO_TEST" ] ; then
723 echo "==================== MAIN END $(date)"