2 REVISION=$(echo '$Revision$' | sed -e 's,\$,,g' -e 's,^\w*:\s,,' )
7 # default values, tunable with command-line options
8 DEFAULT_FCDISTRO=centos5
9 DEFAULT_PLDISTRO=planetlab
10 DEFAULT_PERSONALITY=linux32
11 DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
12 DEFAULT_build_SVNPATH="http://svn.planet-lab.org/svn/build/trunk"
13 DEFAULT_TESTCONFIG="default"
16 # web publishing results
17 DEFAULT_WEBPATH="/build/@PLDISTRO@/"
19 # default gpg path used in signing yum repo
20 DEFAULT_GPGPATH="/etc/planetlab"
21 # default email to use in gpg secring
22 DEFAULT_GPGUID="root@$( /bin/hostname )"
25 DEFAULT_TESTBUILDURL="http://build.onelab.eu/"
26 TESTBOXSSH=root@testbox.onelab.eu
28 # assuming vserver runs in UTC
29 DATE=$(date +'%Y.%m.%d')
31 # temporary - wrap a quick summary of suspicious stuff
32 # this is to focus on installation that go wrong
33 # use with care, a *lot* of other things can go bad as well
36 echo "******************** BEG SUMMARY"
39 # read a full log and tries to extract the interesting stuff
42 m_show_line=re.compile(".* BEG (RPM|VSERVER).*|.*'boot'.*|\* .*|.*is not installed.*|.*PROPFIND.*|.*Starting.*:runtest.*")
43 m_installing_any=re.compile('\r (Installing:[^\]]*]) ')
44 m_installing_err=re.compile('\r (Installing:[^\]]*])(..+)')
45 m_installing_end=re.compile('Installed:.*')
46 m_installing_doc1=re.compile("(.*)install-info: No such file or directory for /usr/share/info/\S+(.*)")
47 m_installing_doc2=re.compile("(.*)grep: /usr/share/info/dir: No such file or directory(.*)")
49 def summary (filename):
58 for line in f.xreadlines():
59 # first off : discard warnings related to doc
60 if m_installing_doc1.match(line):
61 (begin,end)=m_installing_doc1.match(line).groups()
63 if m_installing_doc2.match(line):
64 (begin,end)=m_installing_doc2.match(line).groups()
66 # unconditionnally show these lines
67 if m_show_line.match(line):
69 # an 'installing' line with messages afterwards : needs to be echoed
70 elif m_installing_err.match(line):
71 (installing,error)=m_installing_err.match(line).groups()
72 print '>>>',installing
75 # closing an 'installing' section
76 elif m_installing_end.match(line):
78 # any 'installing' line
79 elif m_installing_any.match(line):
81 installing=m_installing_any.match(line).group(1)
82 print '>>>',installing
84 # print lines when echo is true
86 if echo: print '>>>',line,
89 print 'Failed to analyze',filename
91 for arg in sys.argv[1:]:
94 echo "******************** END SUMMARY"
98 # Notify recipient of failure or success, manage various stamps
103 summary $LOG >> ${WEBLOG}
104 (echo -n "============================== $COMMAND: failure at " ; date ; tail -c 30k $WEBLOG) > ${WEBLOG}.ko
105 if [ -n "$MAILTO" ] ; then
107 echo "See full build log at ${LOG_URL}" ; \
108 echo "and tail version at ${LOG_URL}.ko" ; \
109 echo "See complete set of testlogs at ${TESTLOGS_URL}" ; \
110 tail -c 30k ${WEBLOG} ) | mail -s "Failures for build ${BASE}" $MAILTO
115 function success () {
119 summary $LOG >> ${WEBLOG}
120 if [ -n "$DO_TEST" ] ; then
122 echo "Successfully built and tested" ; \
123 echo "See full build log at ${LOG_URL}" ; \
124 echo "See complete set of testlogs at ${TESTLOGS_URL}" ; \
126 rm -f ${WEBLOG}.ok ${WEBLOG}.ko
129 echo "Successfully built, no test requested" ; \
130 echo "See full build log at ${LOG_URL}" ; \
133 if [ -n "$MAILTO" ] ; then
135 echo "$PLDISTRO ($BASE) build for $FCDISTRO completed on $(date)" ; \
136 echo "See full build log at ${LOG_URL}" ; \
137 [ -n "$DO_TEST" ] && echo "See complete set of testlogs at ${TESTLOGS_URL}" ) \
138 | mail -s "Successful build for ${BASE}" $MAILTO
143 # run in the vserver - do not manage success/failure, will be done from the root ctx
148 echo -n "============================== Starting $COMMAND:build on "
152 # if TAGSRELEASE specified : update PLDISTROTAGS with this tag
153 if [ -n "$TAGSRELEASE" ] ; then
154 svn up -r $TAGSRELEASE $PLDISTROTAGS
159 echo "Running make IN $(pwd)"
161 # stuff our own variable settings
162 MAKEVARS=("PLDISTRO=${PLDISTRO}" "${MAKEVARS[@]}")
163 MAKEVARS=("PLDISTROTAGS=${PLDISTROTAGS}" "${MAKEVARS[@]}")
164 MAKEVARS=("build-SVNPATH=${build_SVNPATH}" "${MAKEVARS[@]}")
165 MAKEVARS=("PERSONALITY=${PERSONALITY}" "${MAKEVARS[@]}")
166 MAKEVARS=("MAILTO=${MAILTO}" "${MAKEVARS[@]}")
168 MAKEVARS=("BASE=${BASE}" "${MAKEVARS[@]}")
171 make -C /build $DRY_RUN "${MAKEVARS[@]}" stage1=true
172 # store tests_svnpath
173 make -C /build $DRY_RUN "${MAKEVARS[@]}" stage1=true tests_svnpath
175 make -C /build $DRY_RUN "${MAKEVARS[@]}" versions
177 make -C /build $DRY_RUN "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
181 # this was formerly run in the myplc-devel chroot but now is run in the root context,
182 # this is so that the .ssh config gets done manually, and once and for all
183 function runtest () {
188 echo -n "============================== Starting $COMMAND:runtest on $(date)"
190 # where to find TESTS_SVNPATH
191 stamp=/vservers/$BASE/build/tests_svnpath
192 if [ ! -f $stamp ] ; then
193 echo "$COMMAND: Cannot figure TESTS_SVNPATH from missing $stamp"
197 TESTS_SVNPATH=$(cat $stamp)
198 # xxx - Thierry - need to rework the test framework in tests/system so it can work
199 # with the entire tests/ module checked out, rather than only tests/system/
200 # ugly workaround for now
201 TESTS_SYSTEM_SVNPATH=${TESTS_SVNPATH}/system
203 ### the URL to the RPMS/<arch> location
205 for a in i386 x86_64; do
206 archdir=/vservers/$BASE/build/RPMS/$a
207 if [ -d $archdir ] ; then
208 url=$(echo $archdir | sed -e "s,/vservers/$BASE/build,${TESTBUILDURL}${PLDISTRO}/${BASE},")
213 if [ -z "$url" ] ; then
214 echo "$COMMAND: Cannot locate arch URL for testing"
219 # test directory name on test box
222 ssh -n ${TESTBOXSSH} rm -rf ${testdir}
224 ssh -n ${TESTBOXSSH} svn co ${TESTS_SYSTEM_SVNPATH} ${testdir}
225 # check out the entire tests/ module (with system/ duplicated) as a subdir - see xxx above
226 ssh -n ${TESTBOXSSH} svn co ${TESTS_SVNPATH} ${testdir}/tests
227 # invoke test on testbox - pass url and build url - so the tests can use vtest-init-vserver.sh
229 for config in ${TESTCONFIG} ; do
230 configs="$configs --config $config"
232 test_env="-p $PERSONALITY -d $PLDISTRO -f $FCDISTRO"
234 # need to proceed despite of set -e
236 ssh 2>&1 -n ${TESTBOXSSH} ${testdir}/runtest --build ${build_SVNPATH} --url ${url} $configs $test_env --all || success=
238 # gather logs in the vserver
239 mkdir -p /vservers/$BASE/build/testlogs
240 ssh 2>&1 -n ${TESTBOXSSH} tar -C ${testdir}/logs -cf - . | tar -C /vservers/$BASE/build/testlogs -xf - || true
241 # push them to the build web
242 rsync --archive --delete /vservers/$BASE/build/testlogs/ $WEBPATH/$BASE/testlogs/
243 chmod -R a+r $WEBPATH/$BASE/testlogs/
245 if [ -z "$success" ] ; then
249 echo -n "============================== End $COMMAND:runtest on $(date)"
252 function in_root_context () {
253 rpm -q util-vserver > /dev/null
256 function sign_node_packages () {
258 echo "Signing node packages"
262 repository=$WEBPATH/$BASE/RPMS/
263 # the rpms that need signing
265 # and the corresponding stamps
268 for package in $(find $repository/ -name '*.rpm') ; do
269 stamp=$repository/signed-stamps/$(basename $package).signed
270 # If package is newer than signature stamp
271 if [ $package -nt $stamp ] ; then
272 new_rpms="$new_rpms $package"
273 new_stamps="$new_stamps $stamp"
275 # Or than createrepo database
276 [ $package -nt $repository/repodata/repomd.xml ] && need_createrepo=true
279 if [ -n "$new_rpms" ] ; then
280 # Create a stamp once the package gets signed
281 mkdir $repository/signed-stamps 2> /dev/null
283 # Sign RPMS. setsid detaches rpm from the terminal,
284 # allowing the (hopefully blank) GPG password to be
285 # entered from stdin instead of /dev/tty.
287 --define "_signature gpg" \
288 --define "_gpg_path $GPGPATH" \
289 --define "_gpg_name $GPGUID" \
290 --resign $new_rpms && touch $new_stamps
293 # Update repository index / yum metadata.
294 if [ -n "$need_createrepo" ] ; then
295 echo "Indexing node packages after signing"
296 if [ -f $repository/yumgroups.xml ] ; then
297 createrepo --quiet -g yumgroups.xml $repository
299 createrepo --quiet $repository
304 function show_env () {
306 echo FCDISTRO=$FCDISTRO
307 echo PLDISTRO=$PLDISTRO
308 echo PERSONALITY=$PERSONALITY
310 echo build_SVNPATH=$build_SVNPATH
311 echo MAKEVARS="${MAKEVARS[@]}"
312 echo DRY_RUN="$DRY_RUN"
313 echo PLDISTROTAGS="$PLDISTROTAGS"
314 echo TAGSRELEASE="$TAGSRELEASE"
315 # this does not help, it's not yet set when we run show_env
316 #echo WEBPATH="$WEBPATH"
317 echo TESTBUILDURL="$TESTBUILDURL"
318 if in_root_context ; then
319 echo PLDISTROTAGS="$PLDISTROTAGS"
321 if [ -f /build/$PLDISTROTAGS ] ; then
322 echo "XXXXXXXXXXXXXXXXXXXX Contents of tags definition file /build/$PLDISTROTAGS"
324 echo "XXXXXXXXXXXXXXXXXXXX end tags definition"
326 echo "XXXXXXXXXXXXXXXXXXXX Cannot find tags definition file /build/$PLDISTROTAGS, assuming remote pldistro"
333 echo "Usage: $COMMAND [option] [var=value...] make-targets"
334 echo "This is $REVISION"
335 echo "Supported options"
336 echo " -f fcdistro - defaults to $DEFAULT_FCDISTRO"
337 echo " -d pldistro - defaults to $DEFAULT_PLDISTRO"
338 echo " -p personality - defaults to $DEFAULT_PERSONALITY"
339 echo " -b base - defaults to $DEFAULT_BASE"
340 echo " @NAME@ replaced as appropriate"
341 echo " -o base: (overwrite) do not re-create vserver, re-use base instead"
342 echo " the -f/-d/-t/-s/-p/-m options are uneffective in this case"
343 echo " -t pldistrotags - defaults to \${PLDISTRO}-tags.mk"
344 echo " -r tagsrelease - a release number that refers to PLDISTROTAGS - defaults to HEAD"
345 echo " -s svnpath - where to fetch the build module - defaults to $DEFAULT_build_SVNPATH"
346 echo " -c testconfig - defaults to $DEFAULT_TESTCONFIG"
347 echo " -w webpath - defaults to $DEFAULT_WEBPATH"
348 echo " -W testbuildurl - defaults to $DEFAULT_TESTBUILDURL"
349 echo " -y sign yum repo in webpath"
350 echo " -g path to gpg secring used to sign rpms. Defaults to $DEFAULT_GPGPATH"
351 echo " -u gpg email used in secring. Defaults to $DEFAULT_GPGUID"
352 echo " -m mailto - no default"
353 echo " -B : run build only"
354 echo " -T : run test only"
355 echo " -n dry-run : -n passed to make - vserver gets created though - no mail sent"
356 echo " -v : be verbose"
357 echo " -7 : uses weekday-@FCDISTRO@ as base"
358 echo " -i ifname - defaults to $DEFAULT_IFNAME - used to determine local IP"
373 while getopts "f:d:p:b:o:t:r:s:x:c:w:W:g:u:m:BTnyv7i:" opt ; do
375 f) FCDISTRO=$OPTARG ;;
376 d) PLDISTRO=$OPTARG ;;
377 p) PERSONALITY=$OPTARG ;;
379 o) OVERBASE=$OPTARG ;;
380 t) PLDISTROTAGS=$OPTARG ;;
381 r) TAGSRELEASE=$OPTARG ;;
382 s) build_SVNPATH=$OPTARG ;;
383 c) TESTCONFIG="$TESTCONFIG $OPTARG" ;;
384 w) WEBPATH=$OPTARG ;;
385 W) TESTBUILDURL=$OPTARG ;;
386 y) SIGNYUMREPO=true ;;
387 g) GPGPATH=$OPTARG ;;
394 7) BASE="$(date +%a|tr A-Z a-z)-@FCDISTRO@" ;;
400 # preserve options for passing them again later, together with expanded base
402 toshift=$(($OPTIND - 1))
403 arg=1; while [ $arg -le $toshift ] ; do options=(${options[@]} "$1") ; shift; arg=$(($arg+1)) ; done
405 # allow var=value stuff;
406 for target in "$@" ; do
407 # check if contains '='
408 target1=$(echo $target | sed -e s,=,,)
409 if [ "$target" = "$target1" ] ; then
410 MAKETARGETS=(${MAKETARGETS[@]} "$target")
412 MAKEVARS=(${MAKEVARS[@]} "$target")
417 [ -z "$FCDISTRO" ] && FCDISTRO=$DEFAULT_FCDISTRO
418 [ -z "$PLDISTRO" ] && PLDISTRO=$DEFAULT_PLDISTRO
419 [ -z "$PERSONALITY" ] && PERSONALITY=$DEFAULT_PERSONALITY
420 [ -z "$PLDISTROTAGS" ] && PLDISTROTAGS="${PLDISTRO}-tags.mk"
421 [ -z "$BASE" ] && BASE="$DEFAULT_BASE"
422 [ -z "$WEBPATH" ] && WEBPATH="$DEFAULT_WEBPATH"
423 [ -z "$TESTBUILDURL" ] && TESTBUILDURL="$DEFAULT_TESTBUILDURL"
424 [ -z "$GPGPATH" ] && GPGPATH="$DEFAULT_GPGPATH"
425 [ -z "$GPGUID" ] && GPGUID="$DEFAULT_GPGUID"
426 [ -z "$IFNAME" ] && IFNAME="$DEFAULT_IFNAME"
427 [ -z "$build_SVNPATH" ] && build_SVNPATH="$DEFAULT_build_SVNPATH"
428 [ -z "$TESTCONFIG" ] && TESTCONFIG="$DEFAULT_TESTCONFIG"
430 [ -n "$DRY_RUN" ] && MAILTO=""
432 if [ -n "$OVERBASE" ] ; then
433 sedargs="-e s,@DATE@,${DATE},g"
434 BASE=$(echo ${OVERBASE} | sed $sedargs)
436 sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
437 BASE=$(echo ${BASE} | sed $sedargs)
440 if ! in_root_context ; then
442 echo "==================== Within vserver BEG $(date)"
444 echo "==================== Within vserver END $(date)"
448 # we run in the root context :
449 # (*) create or check for the vserver to use
450 # (*) copy this command in the vserver
453 if [ -n "$OVERBASE" ] ; then
454 ### Re-use a vserver (finish an unfinished build..)
455 if [ ! -d /vservers/${BASE} ] ; then
456 echo $COMMAND : cannot find vserver $BASE
459 # manage LOG - beware it might be a symlink so nuke it first
460 LOG=/vservers/${BASE}.log.txt
464 echo "XXXXXXXXXX $COMMAND: using existing vserver $BASE" $(date)
465 # start in case e.g. we just rebooted
466 vserver ${BASE} start || :
468 vserver ${BASE} exec svn update /build
469 # get environment from the first run
470 FCDISTRO=$(vserver ${BASE} exec /build/getdistroname.sh)
472 PLDISTRO=$(vserver ${BASE} exec make --no-print-directory -C /build stage1=skip +PLDISTRO)
473 PLDISTROTAGS=$(vserver ${BASE} exec make --no-print-directory -C /build stage1=skip +PLDISTROTAGS)
474 build_SVNPATH=$(vserver ${BASE} exec make --no-print-directory -C /build stage1=skip +build-SVNPATH)
475 PERSONALITY=$(vserver ${BASE} exec make --no-print-directory -C /build stage1=skip +PERSONALITY)
476 MAILTO=$(vserver ${BASE} exec make --no-print-directory -C /build stage1=skip +MAILTO)
479 # create vserver: check it does not exist yet
481 while [ -d /vservers/${BASE}${i} ] ; do
482 # we name subsequent builds <base>-n<i> so the logs and builds get sorted properly
483 [ -z ${i} ] && BASE=${BASE}-n
485 if [ $i -gt 100 ] ; then
486 echo "$COMMAND: Failed to create build vserver /vservers/${BASE}${i}"
492 # manage LOG - beware it might be a symlink so nuke it first
493 LOG=/vservers/${BASE}.log.txt
497 echo "XXXXXXXXXX $COMMAND: creating vserver $BASE" $(date)
500 ### extract the whole build - much simpler
501 tmpdir=/tmp/$COMMAND-$$
502 svn export $build_SVNPATH $tmpdir
505 ./vbuild-init-vserver.sh -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} -i ${IFNAME} ${BASE}
509 # Extract build again - in the vserver
510 vserver ${BASE} exec svn checkout ${build_SVNPATH} /build
512 echo "XXXXXXXXXX $COMMAND: preparation of vserver $BASE done" $(date)
514 # The log inside the vserver contains everything
515 LOG2=/vservers/${BASE}/log.txt
516 (echo "==================== BEG VSERVER Transcript of vserver creation" ; \
518 echo "==================== END VSERVER Transcript of vserver creation" ; \
519 echo "xxxxxxxxxx Messing with logs, symlinking $LOG2 to $LOG" ) >> $LOG2
520 ### not too nice : nuke the former log, symlink it to the new one
521 rm $LOG; ln -s $LOG2 $LOG
526 sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
527 WEBPATH=$(echo ${WEBPATH} | sed $sedargs)
529 # where to store the log for web access
530 WEBLOG=${WEBPATH}/${BASE}.log.txt
531 # compute the log URL - inserted in the mail messages for convenience
532 LOG_URL=$(echo ${WEBLOG} | sed -e "s,//,/,g" -e "s,/build/,${TESTBUILDURL},")
533 TESTLOGS_URL=$(echo ${WEBPATH}/${BASE}/testlogs | sed -e "s,//,/,g" -e "s,/build/,${TESTBUILDURL},")
535 if [ -n "$DO_BUILD" ] ; then
537 cp $COMMANDPATH /vservers/${BASE}/build/
539 # invoke this command in the vserver for building (-T)
540 vserver ${BASE} exec chmod +x /build/$COMMAND
541 vserver ${BASE} exec /build/$COMMAND "${options[@]}" -b "${BASE}" "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
544 # publish to the web so runtest can find them
545 rm -rf $WEBPATH/$BASE ; mkdir -p $WEBPATH/$BASE/{RPMS,SRPMS}
546 rsync --archive --delete --verbose /vservers/$BASE/build/RPMS/ $WEBPATH/$BASE/RPMS/
547 rsync --archive --delete --verbose /vservers/$BASE/build/SRPMS/ $WEBPATH/$BASE/SRPMS/
548 # publish myplc-release
549 rsync --verbose /vservers/$BASE/build/myplc-release $WEBPATH/$BASE
551 # create yum repo and sign packages.
552 if [ -n "$SIGNYUMREPO" ] ; then
556 if [ -n "$DO_TEST" ] ; then