#!/bin/bash
-# NOTE on lxcsu
-# this tool derives from the PL code, from the lxc-userspace module
-# can be obtained through rpm/yum
-# it is used here as a replacement for 'vserver <> exec'
-# that is used throughout this code
-
COMMANDPATH=$0
COMMAND=$(basename $0)
+# close stdin, as with ubuntu and debian VMs this script tends to hang and wait for input ..
+0<&-
+
+# old guests have e.g. mount in /bin but this is no longer part of
+# the standard PATH in recent hosts after usrmove, so let's keep it simple
+export PATH=$PATH:/bin:/sbin
+
# default values, tunable with command-line options
-DEFAULT_FCDISTRO=f20
-DEFAULT_PLDISTRO=planetlab
+DEFAULT_FCDISTRO=f29
+DEFAULT_PLDISTRO=lxc
DEFAULT_PERSONALITY=linux64
-DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
+DEFAULT_MAILDEST="build at onelab.eu"
DEFAULT_BUILD_SCM_URL="git://git.onelab.eu/build"
-DEFAULT_IFNAME=eth0
+DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
# default gpg path used in signing yum repo
DEFAULT_GPGPATH="/etc/planetlab"
RUN_LOG_EXTRAS=""
# for publishing results, and the tests settings
-x=$(hostname)
-y=$(hostname|sed -e s,inria,,)
-# INRIA defaults
-if [ "$x" != "$y" ] ; then
- DEFAULT_WEBPATH="/build/@PLDISTRO@/"
- DEFAULT_TESTBUILDURL="http://build.onelab.eu/"
- # this is where the buildurl is pointing towards
- DEFAULT_WEBROOT="/build/"
- DEFAULT_TESTMASTER="testmaster.onelab.eu"
-else
- DEFAULT_WEBPATH="/build/@FCDISTRO@/@PLDISTRO@/"
- DEFAULT_TESTBUILDURL="http://build.planet-lab.org/"
- # this is where the buildurl is pointing towards
- DEFAULT_WEBROOT="/build/"
- DEFAULT_TESTMASTER="manager.test.planet-lab.org"
-fi
+DEFAULT_WEBPATH="/build/@PLDISTRO@/"
+DEFAULT_TESTBUILDURL="http://build.onelab.eu/"
+# this is where the buildurl is pointing towards
+DEFAULT_WEBROOT="/build/"
+DEFAULT_TESTMASTER="testmaster.onelab.eu"
####################
# assuming vm runs in UTC
DATE=$(date +'%Y.%m.%d')
+BUILD_BEG=$(date +'%H:%M')
+BUILD_BEG_S=$(date +'%s')
# still using /vservers for legacy reasons
# as far as the build & test infra, we could adopt a new name
# but the PL code still uses this name for now, so let's keep it simple
function rootdir () {
slice=$1; shift
- echo /vservers/$slice/rootfs
+ echo /vservers/$slice
}
function logfile () {
slice=$1; shift
echo /vservers/$slice.log.txt
}
+########################################
+# workaround for broken lxc-enter-namespace
+# 1st version was relying on virsh net-dhcp-leases
+# however this was too fragile, would not work for fedora14 containers
+# WARNING: this code is duplicated in lbuild-initvm.sh
+function guest_ipv4() {
+ lxc=$1; shift
+
+ mac=$(virsh -c lxc:/// domiflist $lxc | egrep 'network|bridge' | awk '{print $5;}')
+ # sanity check
+ [ -z "$mac" ] && return 0
+ arp -en | grep "$mac" | awk '{print $1;}'
+}
+
# wrap a quick summary of suspicious stuff
# this is to focus on installation that go wrong
# use with care, a *lot* of other things can go bad as well
function summary () {
from=$1; shift
- echo "******************** BEG SUMMARY"
- python - $from <<EOF
-#!/usr/bin/env python
+ echo "******************** BEG SUMMARY"
+ python3 - $from <<EOF
+#!/usr/bin/env python3
# read a full log and tries to extract the interesting stuff
-import sys,re
-m_show_line=re.compile(".* (BEG|END) (RPM|LXC).*|.*'boot'.*|\* .*| \* .*|.*is not installed.*|.*PROPFIND.*|.* (BEG|END).*:run_log.*|.* Within LXC (BEG|END) .*|.* MAIN (BEG|END).*")
-m_installing_any=re.compile('\r (Installing:[^\]]*]) ')
-m_installing_err=re.compile('\r (Installing:[^\]]*])(..+)')
-m_installing_end=re.compile('Installed:.*')
-m_installing_doc1=re.compile("(.*)install-info: No such file or directory for /usr/share/info/\S+(.*)")
-m_installing_doc2=re.compile("(.*)grep: /usr/share/info/dir: No such file or directory(.*)")
+import sys, re
+m_show_line = re.compile(
+".* (BEG|END) (RPM|LXC).*|.*'boot'.*|\* .*| \* .*|.*is not installed.*|.*PROPFIND.*|.* (BEG|END).*:run_log.*|.* Within LXC (BEG|END) .*|.* MAIN (BEG|END).*")
+m_installing_any = re.compile('\r (Installing:[^\]]*]) ')
+m_installing_err = re.compile('\r (Installing:[^\]]*])(..+)')
+m_installing_end = re.compile('Installed:.*')
+m_installing_doc1 = re.compile("(.*)install-info: No such file or directory for /usr/share/info/\S+(.*)")
+m_installing_doc2 = re.compile("(.*)grep: /usr/share/info/dir: No such file or directory(.*)")
def summary (filename):
try:
- if filename=="-":
- filename="stdin"
- f=sys.stdin
+ if filename == "-":
+ filename = "stdin"
+ f = sys.stdin
else:
- f=open(filename)
- echo=False
+ f = open(filename)
+ echo = False
for line in f.xreadlines():
# first off : discard warnings related to doc
if m_installing_doc1.match(line):
line=begin+end
# unconditionnally show these lines
if m_show_line.match(line):
- print '>>>',line,
+ print('>>>', line, end="")
# an 'installing' line with messages afterwards : needs to be echoed
elif m_installing_err.match(line):
(installing,error)=m_installing_err.match(line).groups()
- print '>>>',installing
- print '>>>',error
+ print('>>>',installing)
+ print('>>>',error)
echo=True
# closing an 'installing' section
elif m_installing_end.match(line):
echo=False
# any 'installing' line
elif m_installing_any.match(line):
- if echo:
+ if echo:
installing=m_installing_any.match(line).group(1)
- print '>>>',installing
+ print('>>>',installing)
echo=False
# print lines when echo is true
else:
- if echo: print '>>>',line,
+ if echo: print('>>>',line, end="")
f.close()
except:
- print 'Failed to analyze',filename
+ print('Failed to analyze',filename)
for arg in sys.argv[1:]:
summary(arg)
EOF
- echo "******************** END SUMMARY"
+ echo "******************** END SUMMARY"
}
### we might build on a box other than the actual web server
rsync --archive $VERBOSE "$@" root@${WEBHOST}:"$remote" ;
}
-# Notify recipient of failure or success, manage various stamps
+function pretty_duration () {
+ total_seconds=$1; shift
+
+ seconds=$(($total_seconds%60))
+ total_minutes=$(($total_seconds/60))
+ minutes=$(($total_minutes%60))
+ hours=$(($total_minutes/60))
+
+ printf "%02d:%02d:%02d" $hours $minutes $seconds
+}
+
+# Notify recipient of failure or success, manage various stamps
function failure() {
set -x
# early stage ? - let's not create /build/@PLDISTRO@
- if test -z "$WEBLOG" ; then
- WEBHOST=$(hostname)
- WEBPATH=/tmp
- WEBBASE=/tmp/vbuild-early-$(date +%Y-%m-%d)
- WEBLOG=/tmp/vbuild-early-$(date +%Y-%m-%d).log.txt
+ if [ -z "$WEBLOG" ] ; then
+ WEBHOST=localhost
+ WEBPATH=/tmp
+ WEBBASE=/tmp/lbuild-early-$(date +%Y-%m-%d)
+ WEBLOG=/tmp/lbuild-early-$(date +%Y-%m-%d).log.txt
fi
webpublish mkdir -p $WEBBASE ||:
webpublish_cp_local_to_remote $LOG $WEBLOG ||:
summary $LOG | webpublish_append_stdin_to_file $WEBLOG ||:
(echo -n "============================== $COMMAND: failure at " ; date ; \
- webpublish tail --lines=1000 $WEBLOG) | \
- webpublish_cp_stdin_to_file $WEBBASE.ko ||:
- if [ -n "$MAILTO" ] ; then
- ( \
- echo "Subject: KO ${BASE} ${MAIL_SUBJECT}" ; \
- echo "To: $MAILTO" ; \
- echo "see build results at $WEBBASE_URL" ; \
- echo "including full build log at $WEBBASE_URL/log.txt" ; \
- echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
- echo "........................................" ; \
- webpublish tail --lines=1000 $WEBLOG ) | \
- sendmail $MAILTO
+ webpublish tail --lines=1000 $WEBLOG) | \
+ webpublish_cp_stdin_to_file $WEBBASE.ko ||:
+ if [ -n "$MAILDEST" ] ; then
+ ( \
+ echo "Subject: KO ${BASE} ${MAIL_SUBJECT}" ; \
+ echo "To: $MAILDEST" ; \
+ echo "see build results at $WEBBASE_URL" ; \
+ echo "including full build log at $WEBBASE_URL/log.txt" ; \
+ echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
+ echo "........................................" ; \
+ webpublish tail --lines=1000 $WEBLOG ) | \
+ sendmail $MAILDEST
fi
exit 1
}
function success () {
set -x
# early stage ? - let's not create /build/@PLDISTRO@
- if test -z "$WEBLOG" ; then
- WEBHOST=$(hostname)
- WEBPATH=/tmp
- WEBLOG=/tmp/vbuild-early-$(date +%Y-%m-%d).log.txt
+ if [ -z "$WEBLOG" ] ; then
+ WEBHOST=localhost
+ WEBPATH=/tmp
+ WEBLOG=/tmp/lbuild-early-$(date +%Y-%m-%d).log.txt
fi
webpublish mkdir -p $WEBBASE
webpublish_cp_local_to_remote $LOG $WEBLOG
summary $LOG | webpublish_append_stdin_to_file $WEBLOG
if [ -n "$DO_TEST" ] ; then
- short_message="PASS"
- ( \
- echo "Successfully built and tested" ; \
- echo "see build results at $WEBBASE_URL" ; \
- echo "including full build log at $WEBBASE_URL/log.txt" ; \
- echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
- ) | webpublish_cp_stdin_to_file $WEBBASE.pass
- webpublish rm -f $WEBBASE.pkg-ok $WEBBASE.ko
+ short_message="PASS"
+ ext="pass"
+ if [ -n "$IGNORED" ] ; then short_message="PASS/WARN"; ext="warn"; fi
+ ( \
+ echo "Successfully built and tested" ; \
+ echo "see build results at $WEBBASE_URL" ; \
+ echo "including full build log at $WEBBASE_URL/log.txt" ; \
+ echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
+ [ -n "$IGNORED" ] && echo "WARNING: some tests steps failed but were ignored - see trace file" ; \
+ ) | webpublish_cp_stdin_to_file $WEBBASE.$ext
+ webpublish rm -f $WEBBASE.pkg-ok $WEBBASE.ko
else
- short_message="PKGOK"
- ( \
- echo "Successful package-only build, no test requested" ; \
- echo "see build results at $WEBBASE_URL" ; \
- echo "including full build log at $WEBBASE_URL/log.txt" ; \
- ) | webpublish_cp_stdin_to_file $WEBBASE.pkg-ok
- webpublish rm -f $WEBBASE.ko
+ short_message="PKGOK"
+ ( \
+ echo "Successful package-only build, no test requested" ; \
+ echo "see build results at $WEBBASE_URL" ; \
+ echo "including full build log at $WEBBASE_URL/log.txt" ; \
+ ) | webpublish_cp_stdin_to_file $WEBBASE.pkg-ok
+ webpublish rm -f $WEBBASE.ko
fi
- if [ -n "$MAILTO" ] ; then
- ( \
- echo "Subject: $short_message ${BASE} ${MAIL_SUBJECT}" ; \
- echo "To: $MAILTO" ; \
- echo "$PLDISTRO ($BASE) build for $FCDISTRO completed on $(date)" ; \
- echo "see build results at $WEBBASE_URL" ; \
- echo "including full build log at $WEBBASE_URL/log.txt" ; \
- [ -n "$DO_TEST" ] && echo "and complete test logs at $WEBBASE_URL/testlogs" ) \
- | sendmail $MAILTO
+ BUILD_END=$(date +'%H:%M')
+ BUILD_END_S=$(date +'%s')
+ if [ -n "$MAILDEST" ] ; then
+ ( \
+ echo "Subject: $short_message ${BASE} ${MAIL_SUBJECT}" ; \
+ echo "To: $MAILDEST" ; \
+ echo "$PLDISTRO ($BASE) build for $FCDISTRO completed on $(date)" ; \
+ echo "see build results at $WEBBASE_URL" ; \
+ echo "including full build log at $WEBBASE_URL/log.txt" ; \
+ [ -n "$DO_TEST" ] && echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
+ [ -n "$IGNORED" ] && echo "WARNING: some tests steps failed but were ignored - see trace file" ; \
+ echo "BUILD TIME: begin $BUILD_BEG -- end $BUILD_END -- duration $(pretty_duration $(($BUILD_END_S-$BUILD_BEG_S)))" ; \
+ ) | sendmail $MAILDEST
fi
# XXX For some reason, we haven't been getting this email for successful builds. If this sleep
# doesn't fix the problem, I'll remove it -- Sapan.
exit 0
}
+##############################
+# manage root / container contexts
+function in_root_context () {
+ rpm -q libvirt > /dev/null
+}
+
+# convenient for simple commands
+function run_in_build_guest () {
+ buildname=$1; shift
+ ssh -o "StrictHostKeyChecking no" root@$(guest_ipv4 $buildname) "$@"
+}
+
# run in the vm - do not manage success/failure, will be done from the root ctx
function build () {
set -x
cd /build
show_env
-
+
echo "Running make IN $(pwd)"
-
+
# stuff our own variable settings
MAKEVARS=("build-GITPATH=${BUILD_SCM_URL}" "${MAKEVARS[@]}")
MAKEVARS=("PLDISTRO=${PLDISTRO}" "${MAKEVARS[@]}")
MAKEVARS=("PLDISTROTAGS=${PLDISTROTAGS}" "${MAKEVARS[@]}")
MAKEVARS=("PERSONALITY=${PERSONALITY}" "${MAKEVARS[@]}")
- MAKEVARS=("MAILTO=${MAILTO}" "${MAKEVARS[@]}")
+ MAKEVARS=("MAILDEST=${MAILDEST}" "${MAKEVARS[@]}")
MAKEVARS=("WEBPATH=${WEBPATH}" "${MAKEVARS[@]}")
MAKEVARS=("TESTBUILDURL=${TESTBUILDURL}" "${MAKEVARS[@]}")
MAKEVARS=("WEBROOT=${WEBROOT}" "${MAKEVARS[@]}")
/build/latex-first-run.sh || :
# stage1
- make -C /build $DRY_RUN "${MAKEVARS[@]}" stage1=true
+ make -C /build $DRY_RUN "${MAKEVARS[@]}" stage1=true
# versions
make -C /build $DRY_RUN "${MAKEVARS[@]}" versions
# actual stuff
# f12 now has everything in i686; try i386 first as older fedoras have both
url=""
for a in i386 i686 x86_64; do
- archdir=$(rootdir $BASE)/build/RPMS/$a
- if [ -d $archdir ] ; then
- # where was that installed
- url=$(echo $archdir | sed -e "s,$(rootdir $BASE)/build,${WEBPATH}/${BASE},")
- url=$(echo $url | sed -e "s,${WEBROOT},${TESTBUILDURL},")
- break
- fi
+ archdir=$(rootdir $BASE)/build/RPMS/$a
+ if [ -d $archdir ] ; then
+ # where was that installed
+ url=$(echo $archdir | sed -e "s,$(rootdir $BASE)/build,${WEBPATH}/${BASE},")
+ url=$(echo $url | sed -e "s,${WEBROOT},${TESTBUILDURL},")
+ break
+ fi
done
if [ -z "$url" ] ; then
- echo "$COMMAND: Cannot locate arch URL for testing"
- failure
- exit 1
+ echo "$COMMAND: Cannot locate arch URL for testing"
+ failure
+ exit 1
fi
testmaster_ssh="root@${TESTMASTER}"
ssh -n ${testmaster_ssh} rm -rf ${testdir} ${testdir}.git
# check it out in the build
- lxcsu -ro $BASE make -C /build tests-module
-
+ run_in_build_guest $BASE make -C /build tests-module ${MAKEVARS[@]}
+
# push it onto the testmaster - just the 'system' subdir is enough
rsync --verbose --archive $(rootdir $BASE)/build/MODULES/tests/system/ ${testmaster_ssh}:${BASE}
# toss the build in the bargain, so the tests don't need to mess with extracting it
rsync --verbose --archive $(rootdir $BASE)/build/MODULES/build ${testmaster_ssh}:${BASE}/
- # invoke test on testbox - pass url and build url - so the tests can use vtest-init-lxc.sh
+ # invoke test on testbox - pass url and build url - so the tests can use lbuild-initvm.sh
run_log_env="-p $PERSONALITY -d $PLDISTRO -f $FCDISTRO"
- # need to proceed despite of set -e
- success=true
- # passing the build_scm_url should not be needed anymore
- ssh 2>&1 -n ${testmaster_ssh} ${testdir}/run_log --build ${BUILD_SCM_URL} --url ${url} $run_log_env $RUN_LOG_EXTRAS $VERBOSE --all || success=
+ # temporarily turn off set -e
+ set +e
+ trap - ERR INT
+ ssh 2>&1 ${testmaster_ssh} ${testdir}/run_log --build ${BUILD_SCM_URL} --url ${url} $run_log_env $RUN_LOG_EXTRAS $VERBOSE --all; retcod=$?
+
+ set -e
+ trap failure ERR INT
+ # interpret retcod of TestMain.py; 2 means there were ignored steps that failed
+ echo "retcod from run_log" $retcod
+ case $retcod in
+ 0) success=true; IGNORED="" ;;
+ 2) success=true; IGNORED=true ;;
+ *) success=""; IGNORED="" ;;
+ esac
# gather logs in the build vm
mkdir -p $(rootdir $BASE)/build/testlogs
echo "============================== END $COMMAND:run_log on $(date)"
if [ -z "$success" ] ; then
- echo "Tests have failed - bailing out"
- failure
+ echo "Tests have failed - bailing out"
+ failure
fi
-
-}
-function in_root_context () {
- rpm -q libvirt > /dev/null
}
# this part won't work if WEBHOST does not match the local host
function sign_node_packages () {
echo "Signing node packages"
-
+
need_createrepo=""
repository=$WEBPATH/$BASE/RPMS/
if [ -n "$new_rpms" ] ; then
# Create a stamp once the package gets signed
mkdir $repository/signed-stamps 2> /dev/null
-
+
# Sign RPMS. setsid detaches rpm from the terminal,
# allowing the (hopefully blank) GPG password to be
# entered from stdin instead of /dev/tty.
--resign $new_rpms && touch $new_stamps
fi
- # Update repository index / yum metadata.
+ # Update repository index / yum metadata.
if [ -n "$need_createrepo" ] ; then
- echo "Indexing node packages after signing"
+ echo "Indexing node packages after signing"
if [ -f $repository/yumgroups.xml ] ; then
createrepo --quiet -g yumgroups.xml $repository
else
echo TESTBUILDURL="$TESTBUILDURL"
echo WEBHOST="$WEBHOST"
if in_root_context ; then
- echo PLDISTROTAGS="$PLDISTROTAGS"
+ echo PLDISTROTAGS="$PLDISTROTAGS"
else
- if [ -f /build/$PLDISTROTAGS ] ; then
- echo "XXXXXXXXXXXXXXXXXXXX Contents of tags definition file /build/$PLDISTROTAGS"
- cat /build/$PLDISTROTAGS
- echo "XXXXXXXXXXXXXXXXXXXX end tags definition"
- else
- echo "XXXXXXXXXXXXXXXXXXXX Cannot find tags definition file /build/$PLDISTROTAGS, assuming remote pldistro"
- fi
+ if [ -f /build/$PLDISTROTAGS ] ; then
+ echo "XXXXXXXXXXXXXXXXXXXX Contents of tags definition file /build/$PLDISTROTAGS"
+ cat /build/$PLDISTROTAGS
+ echo "XXXXXXXXXXXXXXXXXXXX end tags definition"
+ else
+ echo "XXXXXXXXXXXXXXXXXXXX Cannot find tags definition file /build/$PLDISTROTAGS, assuming remote pldistro"
+ fi
fi
set -x
}
function setupssh () {
base=$1; shift
sshkey=$1; shift
-
+
if [ -f ${sshkey} ] ; then
- SSHDIR=$(rootdir ${base})/root/.ssh
- mkdir -p ${SSHDIR}
- cp $sshkey ${SSHDIR}/thekey
- (echo "host *"; \
- echo " IdentityFile ~/.ssh/thekey"; \
- echo " StrictHostKeyChecking no" ) > ${SSHDIR}/config
- chmod 700 ${SSHDIR}
- chmod 400 ${SSHDIR}/*
- else
- echo "WARNING : could not find provided ssh key $sshkey - ignored"
+ SSHDIR=$(rootdir ${base})/root/.ssh
+ mkdir -p ${SSHDIR}
+ cp $sshkey ${SSHDIR}/thekey
+ (echo "host *"; \
+ echo " IdentityFile ~/.ssh/thekey"; \
+ echo " StrictHostKeyChecking no" ) > ${SSHDIR}/config
+ chmod 700 ${SSHDIR}
+ chmod 400 ${SSHDIR}/*
+ else
+ echo "WARNING : could not find provided ssh key $sshkey - ignored"
fi
}
echo " -f fcdistro - defaults to $DEFAULT_FCDISTRO"
echo " -d pldistro - defaults to $DEFAULT_PLDISTRO"
echo " -p personality - defaults to $DEFAULT_PERSONALITY"
- echo " -m mailto - no default"
+ echo " -m mailto - defaults to $DEFAULT_MAILDEST"
echo " -s build_scm_url - git URL where to fetch the build module - defaults to $DEFAULT_BUILD_SCM_URL"
echo " define GIT tag or branch name appending @tagname to url"
echo " -t pldistrotags - defaults to \${PLDISTRO}-tags.mk"
echo " -c testconfig - defaults to $DEFAULT_TESTCONFIG"
echo " -y {pl,pg} - passed to run_log"
echo " -e step - passed to run_log"
+ echo " -i step - passed to run_log"
echo " -X : passes --lxc to run_log"
echo " -S : passes --vs to run_log"
echo " -x <run_log_args> - a hook to pass other arguments to run_log"
echo " -r webroot - defaults to $DEFAULT_WEBROOT - the fs point where testbuildurl actually sits"
echo " -M testmaster - defaults to $DEFAULT_TESTMASTER"
echo " -Y - sign yum repo in webpath"
- echo " -g gpg_path - to the gpg secring used to sign rpms. Defaults to $DEFAULT_GPGPATH"
+ echo " -g gpg_path - to the gpg secring used to sign rpms. Defaults to $DEFAULT_GPGPATH"
echo " -u gpg_uid - email used in secring. Defaults to $DEFAULT_GPGUID"
echo " -K sshkey - specify ssh key to use when reaching git over ssh"
echo " -S - do not publish source rpms"
echo " -n - dry-run: -n passed to make - vm gets created though - no mail sent"
echo " -v - be verbose"
echo " -7 - uses weekday-@FCDISTRO@ as base"
- echo " -i ifname - defaults to $DEFAULT_IFNAME - used to determine local IP"
echo " --build-branch branch - build using the branch from build module"
exit 1
}
function main () {
set -e
+ trap failure ERR INT
# parse arguments
MAKEVARS=()
SIGNYUMREPO=""
OPTS_ORIG=$@
- OPTS=$(getopt -o "f:d:p:m:s:t:b:o:c:y:e:XSx:w:W:r:M:Yg:u:K:SBTnv7i:P:h" -l "build-branch:" -- $@)
+ OPTS=$(getopt -o "f:d:p:m:s:t:b:o:c:y:e:i:XSx:w:W:r:M:Yg:u:K:SBTnv7i:P:h" -l "build-branch:" -- $@)
if [ $? != 0 ]
then
usage
fi
eval set -- "$OPTS"
while true; do
- case $1 in
- -f) FCDISTRO=$2; shift 2 ;;
- -d) PLDISTRO=$2; shift 2 ;;
- -p) PERSONALITY=$2; shift 2 ;;
- -m) MAILTO=$2; shift 2 ;;
- -s) BUILD_SCM_URL=$2; shift 2 ;;
- -t) PLDISTROTAGS=$2; shift 2 ;;
- -b) BASE=$2; shift 2 ;;
- -o) OVERBASE=$2; shift 2 ;;
- -c) TESTCONFIG="$TESTCONFIG $2"; shift 2 ;;
- ########## passing stuff to run_log
- # -y foo -> run_log -y foo
- -y) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --rspec-style $2"; shift 2 ;;
- # -e foo -> run_log -e foo
- -e) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --exclude $2"; shift 2 ;;
- # -X -> run_log --lxc
- -X) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --lxc"; shift;;
- # -S -> run_log --vs
- -S) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --vs"; shift;;
- # more general form to pass args to run_log
- # -x foo -> run_log foo
- -x) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS $2"; shift 2;;
- ##########
- -w) WEBPATH=$2; shift 2 ;;
- -W) TESTBUILDURL=$2; shift 2 ;;
- -r) WEBROOT=$2; shift 2 ;;
- -M) TESTMASTER=$2; shift 2 ;;
+ case $1 in
+ -f) FCDISTRO=$2; shift 2 ;;
+ -d) PLDISTRO=$2; shift 2 ;;
+ -p) PERSONALITY=$2; shift 2 ;;
+ -m) MAILDEST=$2; shift 2 ;;
+ -s) BUILD_SCM_URL=$2; shift 2 ;;
+ -t) PLDISTROTAGS=$2; shift 2 ;;
+ -b) BASE=$2; shift 2 ;;
+ -o) OVERBASE=$2; shift 2 ;;
+ -c) TESTCONFIG="$TESTCONFIG $2"; shift 2 ;;
+ ########## passing stuff to run_log
+ # -y foo -> run_log -y foo
+ -y) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --rspec-style $2"; shift 2 ;;
+ # -e foo -> run_log -e foo
+ -e) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --exclude $2"; shift 2 ;;
+ -i) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --ignore $2"; shift 2 ;;
+ # -X -> run_log --lxc
+ -X) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --lxc"; shift;;
+ # -S -> run_log --vs
+ -S) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --vs"; shift;;
+ # more general form to pass args to run_log
+ # -x foo -> run_log foo
+ -x) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS $2"; shift 2;;
+ ##########
+ -w) WEBPATH=$2; shift 2 ;;
+ -W) TESTBUILDURL=$2; shift 2 ;;
+ -r) WEBROOT=$2; shift 2 ;;
+ -M) TESTMASTER=$2; shift 2 ;;
-Y) SIGNYUMREPO=true; shift ;;
-g) GPGPATH=$2; shift 2 ;;
-u) GPGUID=$2; shift 2 ;;
- -K) SSH_KEY=$2; shift 2 ;;
- -S) PUBLISH_SRPMS="" ; shift ;;
- -B) DO_TEST= ; shift ;;
- -T) DO_BUILD= ; shift;;
- -n) DRY_RUN="-n" ; shift ;;
- -v) set -x ; VERBOSE="-v" ; shift ;;
- -7) BASE="$(date +%a|tr A-Z a-z)-@FCDISTRO@" ; shift ;;
- -i) IFNAME=$2; shift 2 ;;
- -P) PREINSTALLED="-P $2"; shift 2;;
- -h) usage ; shift ;;
+ -K) SSH_KEY=$2; shift 2 ;;
+ -S) PUBLISH_SRPMS="" ; shift ;;
+ -B) DO_TEST= ; shift ;;
+ -T) DO_BUILD= ; shift;;
+ -n) DRY_RUN="-n" ; shift ;;
+ -v) set -x ; VERBOSE="-v" ; shift ;;
+ -7) BASE="$(date +%a|tr A-Z a-z)-@FCDISTRO@" ; shift ;;
+ -P) PREINSTALLED="-P $2"; shift 2;;
+ -h) usage ; shift ;;
--) shift; break ;;
- esac
+ esac
done
# preserve options for passing them again later, together with expanded base
options=$OPTS_ORIG
- # allow var=value stuff;
+ # allow var=value stuff;
for target in "$@" ; do
- # check if contains '='
- target1=$(echo $target | sed -e s,=,,)
- if [ "$target" = "$target1" ] ; then
- MAKETARGETS=(${MAKETARGETS[@]} "$target")
- else
- MAKEVARS=(${MAKEVARS[@]} "$target")
- fi
+ # check if contains '='
+ target1=$(echo $target | sed -e s,=,,)
+ if [ "$target" = "$target1" ] ; then
+ MAKETARGETS=(${MAKETARGETS[@]} "$target")
+ else
+ MAKEVARS=(${MAKEVARS[@]} "$target")
+ fi
done
-
+
# set defaults
[ -z "$FCDISTRO" ] && FCDISTRO=$DEFAULT_FCDISTRO
[ -z "$PLDISTRO" ] && PLDISTRO=$DEFAULT_PLDISTRO
[ -z "$PERSONALITY" ] && PERSONALITY=$DEFAULT_PERSONALITY
+ [ -z "$MAILDEST" ] && MAILDEST=$(echo $DEFAULT_MAILDEST | sed -e 's, at ,@,')
[ -z "$PLDISTROTAGS" ] && PLDISTROTAGS="${PLDISTRO}-tags.mk"
[ -z "$BASE" ] && BASE="$DEFAULT_BASE"
[ -z "$WEBPATH" ] && WEBPATH="$DEFAULT_WEBPATH"
[ -z "$WEBROOT" ] && WEBROOT="$DEFAULT_WEBROOT"
[ -z "$GPGPATH" ] && GPGPATH="$DEFAULT_GPGPATH"
[ -z "$GPGUID" ] && GPGUID="$DEFAULT_GPGUID"
- [ -z "$IFNAME" ] && IFNAME="$DEFAULT_IFNAME"
[ -z "$BUILD_SCM_URL" ] && BUILD_SCM_URL="$DEFAULT_BUILD_SCM_URL"
[ -z "$TESTCONFIG" ] && TESTCONFIG="$DEFAULT_TESTCONFIG"
[ -z "$TESTMASTER" ] && TESTMASTER="$DEFAULT_TESTMASTER"
- [ -n "$DRY_RUN" ] && MAILTO=""
+ [ -n "$DRY_RUN" ] && MAILDEST=""
# elaborate the extra args to be passed to run_log
for config in ${TESTCONFIG} ; do
- RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --config $config"
+ RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --config $config"
done
-
-
+
+
if [ -n "$OVERBASE" ] ; then
- sedargs="-e s,@DATE@,${DATE},g"
- BASE=$(echo ${OVERBASE} | sed $sedargs)
+ sedargs="-e s,@DATE@,${DATE},g"
+ BASE=$(echo ${OVERBASE} | sed $sedargs)
else
- sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
- BASE=$(echo ${BASE} | sed $sedargs)
+ sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
+ BASE=$(echo ${BASE} | sed $sedargs)
fi
### elaborate mail subject
if [ -n "$DO_BUILD" -a -n "$DO_TEST" ] ; then
- MAIL_SUBJECT="full"
+ MAIL_SUBJECT="full"
elif [ -n "$DO_BUILD" ] ; then
- MAIL_SUBJECT="pkg-only"
+ MAIL_SUBJECT="pkg-only"
elif [ -n "$DO_TEST" ] ; then
- MAIL_SUBJECT="test-only"
+ MAIL_SUBJECT="test-only"
fi
if [ -n "$OVERBASE" ] ; then
- MAIL_SUBJECT="${MAIL_SUBJECT} rerun"
+ MAIL_SUBJECT="${MAIL_SUBJECT} rerun"
else
- MAIL_SUBJECT="${MAIL_SUBJECT} fresh"
+ MAIL_SUBJECT="${MAIL_SUBJECT} fresh"
fi
short_hostname=$(hostname | cut -d. -f1)
MAIL_SUBJECT="on ${short_hostname} - ${MAIL_SUBJECT}"
- ### compute WEBHOST from TESTBUILDURL
+ ### compute WEBHOST from TESTBUILDURL
# this is to avoid having to change the builds configs everywhere
# simplistic way to extract hostname from a URL
WEBHOST=$(echo "$TESTBUILDURL" | cut -d/ -f 3)
if ! in_root_context ; then
# in the vm
- echo "==================== Within LXC BEG $(date)"
- build
- echo "==================== Within LXC END $(date)"
+ echo "==================== Within LXC BEG $(date)"
+ build
+ echo "==================== Within LXC END $(date)"
else
- trap failure ERR INT
- # we run in the root context :
+ trap failure ERR INT
+ # we run in the root context :
# (*) create or check for the vm to use
# (*) copy this command in the vm
# (*) invoke it
-
- if [ -n "$OVERBASE" ] ; then
+
+ if [ -n "$OVERBASE" ] ; then
### Re-use a vm (finish an unfinished build..)
- if [ ! -d $(rootdir ${BASE}) ] ; then
- echo $COMMAND : cannot find vm $BASE
- exit 1
- fi
- # manage LOG - beware it might be a symlink so nuke it first
- LOG=$(logfile ${BASE})
- rm -f $LOG
- exec > $LOG 2>&1
- set -x
- echo "XXXXXXXXXX $COMMAND: using existing vm $BASE" $(date)
- # start in case e.g. we just rebooted
- virsh --connect lxc:/// start ${BASE} || :
- # retrieve environment from the previous run
- FCDISTRO=$(lxcsu -ro ${BASE} /build/getdistroname.sh)
- BUILD_SCM_URL=$(lxcsu -ro ${BASE} make --no-print-directory -C /build stage1=skip +build-GITPATH)
- # for efficiency, crop everything in one make run
- tmp=/tmp/${BASE}-env.sh
- lxcsu -ro ${BASE} make --no-print-directory -C /build stage1=skip \
- ++PLDISTRO ++PLDISTROTAGS ++PERSONALITY ++MAILTO ++WEBPATH ++TESTBUILDURL ++WEBROOT > $tmp
- . $tmp
- rm -f $tmp
- # update build
- [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
- lxcsu -ro $BASE bash -c "cd /build; git pull; make tests-clean"
- # make sure we refresh the tests place in case it has changed
- rm -f /build/MODULES/tests
- options=(${options[@]} -d $PLDISTRO -t $PLDISTROTAGS -s $BUILD_SCM_URL)
- [ -n "$PERSONALITY" ] && options=(${options[@]} -p $PERSONALITY)
- [ -n "$MAILTO" ] && options=(${options[@]} -m $MAILTO)
- [ -n "$WEBPATH" ] && options=(${options[@]} -w $WEBPATH)
- [ -n "$TESTBUILDURL" ] && options=(${options[@]} -W $TESTBUILDURL)
- [ -n "$WEBROOT" ] && options=(${options[@]} -r $WEBROOT)
- show_env
- else
- # create vm: check it does not exist yet
- i=
- while [ -d $(rootdir ${BASE})${i} ] ; do
- # we name subsequent builds <base>-n<i> so the logs and builds get sorted properly
- [ -z ${i} ] && BASE=${BASE}-n
- i=$((${i}+1))
- if [ $i -gt 100 ] ; then
- echo "$COMMAND: Failed to create build vm $(rootdir ${BASE})${i}"
- exit 1
- fi
- done
- BASE=${BASE}${i}
- # need update
- # manage LOG - beware it might be a symlink so nuke it first
- LOG=$(logfile ${BASE})
- rm -f $LOG
- exec > $LOG 2>&1
- set -x
- echo "XXXXXXXXXX $COMMAND: creating vm $BASE" $(date)
- show_env
-
- ### extract the whole build - much simpler
- tmpdir=/tmp/$COMMAND-$$
- GIT_REPO=$(echo $BUILD_SCM_URL | cut -d@ -f1)
- GIT_TAG=$(echo $BUILD_SCM_URL | cut -s -d@ -f2)
- GIT_TAG=${GIT_TAG:-master}
- mkdir -p $tmpdir; git archive --remote=$GIT_REPO $GIT_TAG | tar -C $tmpdir -xf -
+ if [ ! -d $(rootdir ${BASE}) ] ; then
+ echo $COMMAND : cannot find vm $BASE
+ exit 1
+ fi
+ # manage LOG - beware it might be a symlink so nuke it first
+ LOG=$(logfile ${BASE})
+ rm -f $LOG
+ exec > $LOG 2>&1
+ set -x
+ echo "XXXXXXXXXX $COMMAND: using existing vm $BASE" $(date)
+ # start in case e.g. we just rebooted
+ virsh -c lxc:/// start ${BASE} || :
+ # retrieve environment from the previous run
+ FCDISTRO=$(run_in_build_guest $BASE /build/getdistroname.sh)
+ BUILD_SCM_URL=$(run_in_build_guest $BASE make --no-print-directory -C /build stage1=skip +build-GITPATH)
+ # for efficiency, crop everything in one make run
+ tmp=/tmp/${BASE}-env.sh
+ run_in_build_guest $BASE make --no-print-directory -C /build stage1=skip \
+ ++PLDISTRO ++PLDISTROTAGS ++PERSONALITY ++MAILDEST ++WEBPATH ++TESTBUILDURL ++WEBROOT > $tmp
+ . $tmp
+ rm -f $tmp
+ # update build
+ [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
+ run_in_build_guest $BASE "(cd /build; git pull; make tests-clean)"
+ # make sure we refresh the tests place in case it has changed
+ rm -f /build/MODULES/tests
+ options=(${options[@]} -d $PLDISTRO -t $PLDISTROTAGS -s $BUILD_SCM_URL)
+ [ -n "$PERSONALITY" ] && options=(${options[@]} -p $PERSONALITY)
+ [ -n "$MAILDEST" ] && options=(${options[@]} -m $MAILDEST)
+ [ -n "$WEBPATH" ] && options=(${options[@]} -w $WEBPATH)
+ [ -n "$TESTBUILDURL" ] && options=(${options[@]} -W $TESTBUILDURL)
+ [ -n "$WEBROOT" ] && options=(${options[@]} -r $WEBROOT)
+ show_env
+ else
+ # create vm: check it does not exist yet
+ i=
+ while [ -d $(rootdir ${BASE})${i} ] ; do
+ # we name subsequent builds <base>-n<i> so the logs and builds get sorted properly
+ [ -z ${i} ] && BASE=${BASE}-n
+ i=$((${i}+1))
+ if [ $i -gt 100 ] ; then
+ echo "$COMMAND: Failed to create build vm $(rootdir ${BASE})${i}"
+ exit 1
+ fi
+ done
+ BASE=${BASE}${i}
+ # need update
+ # manage LOG - beware it might be a symlink so nuke it first
+ LOG=$(logfile ${BASE})
+ rm -f $LOG
+ exec > $LOG 2>&1
+ set -x
+ echo "XXXXXXXXXX $COMMAND: creating vm $BASE" $(date)
+ show_env
+
+ ### extract the whole build - much simpler
+ tmpdir=/tmp/$COMMAND-$$
+ GIT_REPO=$(echo $BUILD_SCM_URL | cut -d@ -f1)
+ GIT_TAG=$(echo $BUILD_SCM_URL | cut -s -d@ -f2)
+ GIT_TAG=${GIT_TAG:-master}
+ mkdir -p $tmpdir
+ ( git archive --remote=$GIT_REPO $GIT_TAG | tar -C $tmpdir -xf -) || \
+ ( echo "==================== git archive FAILED, trying git clone instead" ; \
+ git clone $GIT_REPO $tmpdir && cd $tmpdir && git checkout $GIT_TAG && rm -rf .git)
# Create lxc vm
- cd $tmpdir
- ./vbuild-init-lxc.sh $VERBOSE -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} -i ${IFNAME} ${PREINSTALLED} ${BASE}
- # cleanup
- cd -
- rm -rf $tmpdir
- # Extract build again - in the vm
- [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
- lxcsu -ro $BASE bash -c "git clone $GIT_REPO /build; cd /build; git checkout $GIT_TAG"
- fi
- echo "XXXXXXXXXX $COMMAND: preparation of vm $BASE done" $(date)
-
- # The log inside the vm contains everything
- LOG2=$(rootdir ${BASE})/log.txt
- (echo "==================== BEG LXC Transcript of vm creation" ; \
- cat $LOG ; \
- echo "==================== END LXC Transcript of vm creation" ; \
- echo "xxxxxxxxxx Messing with logs, symlinking $LOG2 to $LOG" ) >> $LOG2
- ### not too nice : nuke the former log, symlink it to the new one
- rm $LOG; ln -s $LOG2 $LOG
- LOG=$LOG2
- # redirect log again
- exec >> $LOG 2>&1
-
- sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
- WEBPATH=$(echo ${WEBPATH} | sed $sedargs)
- webpublish mkdir -p ${WEBPATH}
+ cd $tmpdir
+ ./lbuild-initvm.sh $VERBOSE -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} ${PREINSTALLED} ${BASE}
+ # cleanup
+ cd -
+ rm -rf $tmpdir
+ # Extract build again - in the vm
+ [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
+ run_in_build_guest $BASE "(git clone $GIT_REPO /build; cd /build; git checkout $GIT_TAG)"
+ fi
+ echo "XXXXXXXXXX $COMMAND: preparation of vm $BASE done" $(date)
+
+ # The log inside the vm contains everything
+ LOG2=$(rootdir ${BASE})/log.txt
+ (echo "==================== BEG LXC Transcript of vm creation" ; \
+ cat $LOG ; \
+ echo "==================== END LXC Transcript of vm creation" ; \
+ echo "xxxxxxxxxx Messing with logs, symlinking $LOG2 to $LOG" ) >> $LOG2
+ ### not too nice : nuke the former log, symlink it to the new one
+ rm $LOG; ln -s $LOG2 $LOG
+ LOG=$LOG2
+ # redirect log again
+ exec >> $LOG 2>&1
+
+ sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
+ WEBPATH=$(echo ${WEBPATH} | sed $sedargs)
+ webpublish mkdir -p ${WEBPATH}
# where to store the log for web access
- WEBBASE=${WEBPATH}/${BASE}
- WEBLOG=${WEBPATH}/${BASE}/log.txt
+ WEBBASE=${WEBPATH}/${BASE}
+ WEBLOG=${WEBPATH}/${BASE}/log.txt
# compute the log URL - inserted in the mail messages for convenience
- WEBBASE_URL=$(echo $WEBBASE | sed -e "s,//,/,g" -e "s,${WEBROOT},${TESTBUILDURL},")
-
- if [ -n "$DO_BUILD" ] ; then
-
- # invoke this command into the build directory of the vm
- cp $COMMANDPATH $(rootdir ${BASE})/build/
-
- # invoke this command in the vm for building (-T)
- lxcsu -ro ${BASE} chmod +x /build/$COMMAND
- lxcsu -ro ${BASE} /build/$COMMAND "${options[@]}" -b "${BASE}" "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
- fi
-
- # publish to the web so run_log can find them
- set +e
- webpublish rm -rf $WEBPATH/$BASE
- # guess if we've been doing any debian-related build
- if [ ! -f $(rootdir $BASE)/etc/debian_version ] ; then
- webpublish mkdir -p $WEBPATH/$BASE/{RPMS,SRPMS}
- webpublish_rsync_dir $WEBPATH/$BASE/RPMS/ $(rootdir $BASE)/build/RPMS/
- [[ -n "$PUBLISH_SRPMS" ]] && webpublish_rsync_dir $WEBPATH/$BASE/SRPMS/ $(rootdir $BASE)/build/SRPMS/
- else
- # run scanpackages so we can use apt-get on this
- # (not needed on fedora b/c this is done by the regular build already)
- lxcsu -ro $BASE bash -c "(cd /build ; dpkg-scanpackages DEBIAN/ | gzip -9c > Packages.gz)"
- webpublish mkdir -p $WEBPATH/$BASE/DEBIAN
- webpublish_rsync_files $WEBPATH/$BASE/DEBIAN/ $(rootdir $BASE)/build/DEBIAN/*.deb
- webpublish_rsync_files $WEBPATH/$BASE/ $(rootdir $BASE)/build/Packages.gz
- fi
- # publish myplc-release if this exists
- release=$(rootdir $BASE)/build/myplc-release
- [ -f $release ] && webpublish_rsync_files $WEBPATH/$BASE $release
- set -e
+ WEBBASE_URL=$(echo $WEBBASE | sed -e "s,//,/,g" -e "s,${WEBROOT},${TESTBUILDURL},")
+
+ if [ -n "$DO_BUILD" ] ; then
+
+ # invoke this command into the build directory of the vm
+ cp $COMMANDPATH $(rootdir ${BASE})/build/
+
+ # invoke this command in the vm for building (-T)
+ run_in_build_guest $BASE chmod +x /build/$COMMAND
+ run_in_build_guest $BASE /build/$COMMAND "${options[@]}" -b "${BASE}" "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
+ fi
+
+ # publish to the web so run_log can find them
+ set +e
+ trap - ERR INT
+ webpublish rm -rf $WEBPATH/$BASE
+ # guess if we've been doing any debian-related build
+ if [ ! -f $(rootdir $BASE)/etc/debian_version ] ; then
+ webpublish mkdir -p $WEBPATH/$BASE/{RPMS,SRPMS}
+ webpublish_rsync_dir $WEBPATH/$BASE/RPMS/ $(rootdir $BASE)/build/RPMS/
+ [[ -n "$PUBLISH_SRPMS" ]] && webpublish_rsync_dir $WEBPATH/$BASE/SRPMS/ $(rootdir $BASE)/build/SRPMS/
+ else
+ # run scanpackages so we can use apt-get on this
+ # (not needed on fedora b/c this is done by the regular build already)
+ run_in_build_guest $BASE "(cd /build ; dpkg-scanpackages DEBIAN/ | gzip -9c > Packages.gz)"
+ webpublish mkdir -p $WEBPATH/$BASE/DEBIAN
+ webpublish_rsync_files $WEBPATH/$BASE/DEBIAN/ $(rootdir $BASE)/build/DEBIAN/*.deb
+ webpublish_rsync_files $WEBPATH/$BASE/ $(rootdir $BASE)/build/Packages.gz
+ fi
+ # publish myplc-release if this exists
+ release=$(rootdir $BASE)/build/myplc-release
+ [ -f $release ] && webpublish_rsync_files $WEBPATH/$BASE $release
+ set -e
+ trap failure ERR INT
# create yum repo and sign packages.
- if [ -n "$SIGNYUMREPO" ] ; then
- # this script does not yet support signing on a remote (webhost) repo
- sign_here=$(hostname) ; sign_web=$(webpublish hostname)
- if [ "$hostname" = "$sign_here" ] ; then
- sign_node_packages
- else
- echo "$COMMAND does not support signing on a remote yum repo"
- echo "you might want to turn off the -y option, or run this on the web server box itself"
- exit 1
- fi
- fi
-
- if [ -n "$DO_TEST" ] ; then
- run_log
- fi
-
- success
-
- echo "==================== MAIN END $(date)"
+ if [ -n "$SIGNYUMREPO" ] ; then
+ # this script does not yet support signing on a remote (webhost) repo
+ sign_here=$(hostname) ; sign_web=$(webpublish hostname)
+ if [ "$hostname" = "$sign_here" ] ; then
+ sign_node_packages
+ else
+ echo "$COMMAND does not support signing on a remote yum repo"
+ echo "you might want to turn off the -y option, or run this on the web server box itself"
+ exit 1
+ fi
+ fi
+
+ if [ -n "$DO_TEST" ] ; then
+ run_log
+ fi
+
+ success
+
+ echo "==================== MAIN END $(date)"
fi
-}
+}
##########
-main "$@"
+main "$@"