#
#################### (planetlab) distributions
#
-# (*) the default distribution is called 'planetlab'
-# (*) you may define an alternative distribution, e.g. onelab
-# in this case you need to
-# (*) create onelab.mk that defines your *packages* (see below)
-# (*) create onelab-tags.mk that defines where to fetch your *modules*
-# (*) create your main yumgroups.xml as groups/<distro>.xml
-# (*) there are also various places where a set of modules are defined.
-# check for .lst files in the various modules that build root images
-# and mimic what's done for planetlab
+# (*) see README-pldistros.txt
# (*) then you need to run
# make stage1=true PLDISTRO=onelab
#
####################
-# This build deals with 2 kinds of objects
+# This build deals with 3 kinds of objects
#
# (*) packages are named upon the RPM name; they are mostly lowercase
# Add a package to ALL if you want it built as part of the default set.
# (*) modules are named after the subversion tree; as of this writing their names
-# are mostly mixed case like MyPLC or Vserverreference
+# are mostly mixed case like MyPLC or VserverReference
+# (*) rpms are named in the spec files. A package typically defines several rpms;
+# rpms are used for defining DEPEND-DEVEL-RPMS. See also package.rpmnames
#
#################### packages
# basics: how to build a package - you need/may define the following variables
# packages defined BEFORE the current one (note: you should use = - as opposed to := - to define these)
# e.g. mydriver-SPECVARS = foo=$(kernel-rpm-release)
# would let you use the %release from the kernel's package when rpmbuild'ing mydriver - see automatic below
-# (*) package-DEPENDS
+# (*) package-DEPEND-PACKAGES
# a set of *packages* that this package depends on
-# (*) package-DEPENDDEVELS
-# a set of *packages* that the build will rpm-install the -devel variant before building <package>
-# (*) package-DEPENDDEVELRPMS
+# (*) package-DEPEND-DEVEL-RPMS
# a set of *rpms* that the build will rpm-install before building <package>
-# (*) package-DEPENDFILES
+# (*) package-DEPEND-FILES
# a set of files that the package depends on - and that make needs to know about
# if this contains RPMS/yumgroups.xml, then the toplevel RPMS's index
# is refreshed with createrepo prior to running rpmbuild
# (*) package-RPMFLAGS: Miscellaneous RPM flags
# (*) package-RPMBUILD: If not rpmbuild - mostly used for sudo'ing rpmbuild
+# (*) package-BUILD-FROM-SRPM: set this to any non-empty value, if your package is able to produce
+# a source rpms by running 'make srpm'
#
#################### modules
# Required information about the various modules (set this in e.g. planetlab-tags.mk)
#
#################### automatic variables
#
-# the build defines the following make variables - these are extracted from spec files
-# (*) package-TARBALLS : from the Source<n>: declaration
-# example: kernel-i386-TARBALLS = SOURCES/linux-2.6.20.tar.bz2
-# (*) package-SOURCE :
-# example: kernel-i386-SOURCE = SOURCES/linux-2.6.20
-# (*) package-SRPM
-# example: kernel-i386-SRPM = SRPMS/kernel-2.6.20-1.2949.fc6.vs2.2.0.1.0.planetlab.src.rpm
-# (*) package-RPMS
-# example: kernel-i386-RPMS = \
-# RPMS/i686/kernel-2.6.20-1.2949.fc6.vs2.2.0.1.0.planetlab.i686.rpm \
-# RPMS/i686/kernel-devel-2.6.20-1.2949.fc6.vs2.2.0.1.0.planetlab.i686.rpm \
-# RPMS/i686/kernel-vserver-2.6.20-1.2949.fc6.vs2.2.0.1.0.planetlab.i686.rpm \
-# RPMS/i686/kernel-debuginfo-2.6.20-1.2949.fc6.vs2.2.0.1.0.planetlab.i686.rpm
-# (*) package-rpm-name
-# example: kernel-i386-rpm-name = kernel
-# (*) package-rpm-release
-# example: kernel-i386-rpm-release = 1.2949.fc6.vs2.2.0.1.0.planetlab
-# (*) package-version
-# example: kernel-i386-rpm-version = 2.6.20
-# (*) package-subversion
-# example: myplc-rpm-subversion = 15
+# the build defines some make variables that are extracted from spec files
+# see for example
+# (*) $ make ulogd-pkginfo
+# to see the list f variables attached to a given package
+# (*) $ make kernel-devel-rpminfo
+# to see the list f variables attached to a given rpm
+#
####################
+# exported to spec files as plrelease
+PLANETLAB_RELEASE = 4.2
+
#
# Default values
#
HOSTARCH := $(shell uname -i)
DISTRO := $(shell ./getdistro.sh)
RELEASE := $(shell ./getrelease.sh)
+DISTRONAME := $(shell ./getdistroname.sh)
+RPM-INSTALL-DEVEL := rpm --force -Uvh
+# cannot force rpm -e
+RPM-UNINSTALL-DEVEL := rpm -e
#################### Makefile
# Default target
PLDISTROTAGS := $(PLDISTRO)-tags.mk
include $(PLDISTROTAGS)
-########## stage1 and stage2
+########## stage1 and stage1iter
# extract specs and compute .mk files by running
# make stage1=true
# entering stage1, we compute all the spec files
-# then we use stage2 to compute the .mk iteratively,
+# then we use stage1iter to compute the .mk iteratively,
# ensuring that the n-1 first makefiles are loaded when creating the n-th one
-# when stage2 is set, it is supposed to be an index (starting at 1) in $(ALL)
+# when stage1iter is set, it is supposed to be an index (starting at 1) in $(ALL)
ALLMKS := $(foreach package, $(ALL), MAKE/$(package).mk)
-### stage2 : need some arithmetic, see
+### stage1iter : need some arithmetic, see
# http://www.cmcrossroads.com/articles/ask-mr.-make/learning-gnu-make-functions-with-arithmetic.html
-ifneq "$(stage2)" ""
+ifneq "$(stage1iter)" ""
# the first n packages
-packages := $(wordlist 1,$(words $(stage2)),$(ALL))
+packages := $(wordlist 1,$(words $(stage1iter)),$(ALL))
# the n-th package
package := $(word $(words $(packages)),$(packages))
# the n-1 first packages
-stage2_1 := $(wordlist 2,$(words $(stage2)),$(stage2))
-previous := $(wordlist 1,$(words $(stage2_1)),$(ALL))
+stage1iter_1 := $(wordlist 2,$(words $(stage1iter)),$(stage1iter))
+previous := $(wordlist 1,$(words $(stage1iter_1)),$(ALL))
previousmks := $(foreach package,$(previous),MAKE/$(package).mk)
include $(previousmks)
all: verbose
verbose:
- @echo "========== stage2 : $(package)"
-# @echo "stage2 : included .mk files : $(previousmks)"
-all: $($(package)_specpath)
+ @echo "========== stage1iter : $(package)"
+# @echo "stage1iter : included .mk files : $(previousmks)"
+all: $($(package).specpath)
all: MAKE/$(package).mk
else
### stage1
@echo "========== stage1"
all : spec2make
all : .rpmmacros
-# specs and makes are done sequentially by stage2
-all : stage2
-stage2:
- arg=""; for n in $(ALL) ; do arg="$$arg x"; $(MAKE) --no-print-directory stage2="$$arg"; done
+# specs and makes are done sequentially by stage1iter
+all : stage1iter
+stage1iter:
+ arg=""; for n in $(ALL) ; do arg="$$arg x"; $(MAKE) --no-print-directory stage1iter="$$arg"; done
### regular make
else
### once .mks are OK, you can run make normally
endif
endif
-####################
-# gather build information for the 'About' page
-myplc-release:
- @echo 'Creating myplc-release'
- rm -f $@
- (echo -n 'Build bdate: ' ; date '+%Y.%m.%d') >> $@
- (echo -n 'Build btime: ' ; date '+%H:%M') >> $@
- (echo -n 'Build hostname: ' ; hostname) >> $@
- (echo -n 'Build location: ' ; pwd) >> $@
- (echo -n 'Build tags file: ' ; fgrep '$$''Id' $(PLDISTROTAGS)) >> $@
- echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx modules versions info" >> $@
- $(MAKE) --no-print-directory versions >> $@
-
-### yumgroups.xml
-# the source
-ifndef YUMGROUPS
-YUMGROUPS := groups/$(PLDISTRO).xml
-endif
-
-RPMS/yumgroups.xml: $(YUMGROUPS)
+### yumgroups.xml : compute from all known .pkgs files
+RPMS/yumgroups.xml:
mkdir -p RPMS
- install -D -m 644 $(YUMGROUPS) $@
+ ./yumgroups.sh $(PLDISTRO) > $@
createrepo = createrepo --quiet -g yumgroups.xml RPMS/
# <module>/<module>.spec while svn modules just define it as <module>.spec
#
define stage1_variables
-$(1)_spec = $(notdir $($(1)-SPEC))
-$(1)_specpath = SPECS/$(notdir $($(1)-SPEC))
-$(1)_module = $(firstword $($(1)-MODULES))
+$(1).spec = $(notdir $($(1)-SPEC))
+$(1).specpath = SPECS/$(1).spec
+$(1).module = $(firstword $($(1)-MODULES))
+$(1)-SVNPATH = $(strip $($(1)-SVNPATH))
endef
$(foreach package, $(ALL), $(eval $(call stage1_variables,$(package))))
# for each package, compute whether we need to set date (i.e. whether we use the trunk)
# the myplc package is forced to have a date, because it is more convenient
# (we cannot bump its number everytime something changes in the system)
+# myplc-native does not need this trick
#
define package_hasdate
-$(1)_hasdate = $(if $(subst myplc,,$(1)), \
- $(if $($(1)-SVNPATH),\
- $(if $(findstring /trunk,$($(1)-SVNPATH)),yes,),\
- $(if $(findstring HEAD,$($(1)-TAG)),yes,)), \
+$(1).has-date = $(if $(subst myplc,,$(1)), \
+ $(if $($($(1).module)-SVNPATH),\
+ $(if $(findstring /trunk,$($($(1).module)-SVNPATH)),yes,),\
+ $(if $(findstring HEAD,$($($(1).module)-TAG)),yes,)), \
yes)
endef
$(foreach package, $(ALL), $(eval $(call package_hasdate,$(package))))
+### the common header for generated specfiles
+# useful when trying new specfiles manually
+header.spec:
+ (echo -n "# Generated by planetlab build from $($(1)-SPEC) on " ; date) > $@
+ echo "%define distro $(DISTRO)" >> $@
+ echo "%define distrorelease $(RELEASE)" >> $@
+ echo "%define distroname $(DISTRONAME)" >> $@
+ echo "%define pldistro $(PLDISTRO)" >> $@
+ echo "%define plrelease $(PLANETLAB_RELEASE)" >> $@
+
### extract spec file from scm
-# usage: extract_spec_file package
-# see early releases for comments on other possible implementations
-# cannot use variables in such rules, we need to inline everything, sigh
define target_spec
-$($(1)_specpath):
+$($(1).specpath): header.spec
mkdir -p SPECS
- (echo -n "# Generated by planetlab build from $($(1)-SPEC) on " ; date) > $($(1)_specpath)
- echo "%define distroname $(DISTRO)" >> $($(1)_specpath)
- echo "%define distrorelease $(RELEASE)" >> $($(1)_specpath)
- echo "%define pldistro $(PLDISTRO)" >> $($(1)_specpath)
- $(if $($(1)_hasdate),echo "%define date $(shell date +%Y.%m.%d)" >> $($(1)_specpath),)
- echo "# included from codebase specfile" >> $($(1)_specpath)
+ cat header.spec > $($(1).specpath)
+ $(if $($(1).has-date),echo "%define date $(shell date +%Y.%m.%d)" >> $($(1).specpath),)
$(if $($(1)-SPECVARS), \
$(foreach line,$($(1)-SPECVARS), \
- echo "%define" $(word 1,$(subst =, ,$(line))) "$(word 2,$(subst =, ,$(line)))" >> $($(1)_specpath) ;))
- $(if $($($(1)_module)-SVNPATH),\
- svn cat $($($(1)_module)-SVNPATH)/$($(1)-SPEC) >> $($(1)_specpath),\
- cvs -d $($($(1)_module)-CVSROOT) checkout \
- -r $($($(1)_module)-TAG) \
- -p $($(1)_module)/$($(1)-SPEC) >> $($(1)_specpath))
- @if [ -z $($(1)_specpath) ] ; then rm $($(1)_specpath) ; exit 1 ; fi
+ echo "%define" $(word 1,$(subst =, ,$(line))) "$(word 2,$(subst =, ,$(line)))" >> $($(1).specpath) ;))
+ echo "# included from $($(1)-SPEC)" >> $($(1).specpath)
+ $(if $($($(1).module)-SVNPATH),\
+ svn cat $($($(1).module)-SVNPATH)/$($(1)-SPEC) >> $($(1).specpath) || rm $($(1).specpath),\
+ cvs -d $($($(1).module)-CVSROOT) checkout \
+ -r $($($(1).module)-TAG) \
+ -p $($(1).module)/$($(1)-SPEC) >> $($(1).specpath))
endef
$(foreach package,$(ALL),$(eval $(call target_spec,$(package))))
-### this utility allows to extract various info from a spec file
-### and to define them in makefiles
-spec2make: spec2make.c
- $(CC) -g -Wall $< -o $@ -lrpm -lrpmbuild
-
+###
# Base rpmbuild in the current directory
-# trying a longer topdir
-# http://forums.fedoraforum.org/showthread.php?t=39625
-# and more specifically post#6
-# hard-wired for now
-export HOME := /building
+# issues on fedora 8 : see the following posts
+# http://forums.fedoraforum.org/showthread.php?t=39625 - and more specifically post#6
+# https://www.redhat.com/archives/fedora-devel-list/2007-November/msg00171.html
+REALROOT=/build
+FAKEROOT=/longbuildroot
+PWD=$(shell /bin/pwd)
+ifeq "$(PWD)" "$(REALROOT)"
+export HOME := $(FAKEROOT)
+else
+export HOME := $(PWD)
+endif
.rpmmacros:
- rm -f /building ; ln -s /build /building
+ifeq "$(shell pwd)" "/build"
+ rm -f $(FAKEROOT) ; ln -s $(REALROOT) $(FAKEROOT)
+endif
rm -f $@
echo "%_topdir $(HOME)" >> $@
echo "%_tmppath $(HOME)/tmp" >> $@
- echo "%_netsharedpath /proc:/dev/pts" >> $@
- echo "%_install_langs C:de:en:es:fr" >> $@
- echo "%_excludedocs yes" >> $@
+ ./getrpmmacros.sh >> $@
+
+### this utility allows to extract various info from a spec file
+### and to define them in makefiles
+spec2make: spec2make.c
+ $(CC) -g -Wall $< -o $@ -lrpm -lrpmbuild
### run spec2make on the spec file and include the result
# usage: spec2make package
define target_mk
-MAKE/$(1).mk: $($(1)_specpath) spec2make .rpmmacros
+MAKE/$(1).mk: $($(1).specpath) spec2make .rpmmacros
mkdir -p MAKE
- ./spec2make $($(1)-RPMFLAGS) $($(1)_specpath) $(1) > MAKE/$(1).mk
+ ./spec2make $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk
@if [ -z MAKE/$(1).mk ] ; then rm MAKE/$(1).mk ; exit 1 ; fi
endef
# always refresh this
all: savepldistro
-####################
+#################### regular make
+
+define stage2_variables
+### devel dependencies
+$(1).rpmbuild = $(if $($(1)-RPMBUILD),$($(1)-RPMBUILD),$(RPMBUILD)) $($(1)-RPMFLAGS)
+$(1).all-devel-rpm-paths := $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).rpm-path))
+$(1).depend-devel-packages := $(sort $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).package)))
+ALL-DEVEL-RPMS += $($(1)-DEPEND-DEVEL-RPMS)
+endef
+
+$(foreach package,$(ALL),$(eval $(call stage2_variables,$(package))))
+ALL-DEVEL-RPMS := $(sort $(ALL-DEVEL-RPMS))
+
+
### pack sources into tarballs
-ALLTARBALLS:= $(foreach package, $(ALL), $($(package)-TARBALLS))
+ALLTARBALLS:= $(foreach package, $(ALL), $($(package).tarballs))
tarballs: $(ALLTARBALLS)
@echo $(words $(ALLTARBALLS)) source tarballs OK
.PHONY: tarballs
### the directory SOURCES/<package>-<version> is made
# with a copy -rl from CODEBASES/<package>
-# the former is $(package-SOURCE) and the latter is $(package-CODEBASE)
-ALLSOURCES:=$(foreach package, $(ALL), $($(package)-SOURCE))
+# the former is $(package.source) and the latter is $(package.codebase)
+ALLSOURCES:=$(foreach package, $(ALL), $($(package).source))
# so that make does not use the rule below directly for creating the tarball files
.SECONDARY: $(ALLSOURCES)
.PHONY: sources
define target_link_codebase_sources
-$($(1)-SOURCE): $($(1)-CODEBASE) ; mkdir -p SOURCES ; cp -rl $($(1)-CODEBASE) $($(1)-SOURCE)
+$($(1).source): $($(1).codebase) ; mkdir -p SOURCES ; cp -rl $($(1).codebase) $($(1).source)
endef
$(foreach package,$(ALL),$(eval $(call target_link_codebase_sources,$(package))))
### codebase extraction
-ALLCODEBASES:=$(foreach package, $(ALL), $($(package)-CODEBASE))
+ALLCODEBASES:=$(foreach package, $(ALL), $($(package).codebase))
# so that make does not use the rule below directly for creating the tarball files
.SECONDARY: $(ALLCODEBASES)
# usage: extract_single_module package
define extract_single_module
mkdir -p CODEBASES
- $(if $($($(1)_module)-SVNPATH), cd CODEBASES && svn export $($($(1)_module)-SVNPATH) $(1), cd CODEBASES && cvs -d $($($(1)_module)-CVSROOT) export -r $($($(1)_module)-TAG) -d $(1) $($(1)_module))
+ $(if $($($(1).module)-SVNPATH), cd CODEBASES && svn export $($($(1).module)-SVNPATH) $(1), cd CODEBASES && cvs -d $($($(1).module)-CVSROOT) export -r $($($(1).module)-TAG) -d $(1) $($(1).module))
endef
# usage: extract_multi_module package
@(echo -n "XXXXXXXXXXXXXXX -- END CODEBASE $(package) : $@ " ; date)
### source rpms
-ALLSRPMS:=$(foreach package,$(ALL),$($(package)-SRPM))
+ALLSRPMS:=$(foreach package,$(ALL),$($(package).srpm))
srpms: $(ALLSRPMS)
@echo $(words $(ALLSRPMS)) source rpms OK
.PHONY: srpms
# usage: target_source_rpm package
# select upon the package name, whether it contains srpm or not
define target_source_rpm
-ifeq "$(subst srpm,,$(1))" "$(1)"
-$($(1)-SRPM): $($(1)_specpath) .rpmmacros $($(1)-TARBALLS)
+ifeq "$($(1)-BUILD-FROM-SRPM)" ""
+$($(1).srpm): $($(1).specpath) .rpmmacros $($(1).tarballs)
mkdir -p BUILD SRPMS tmp
- @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) " ; date)
- -$(foreach devel,$($(1)-DEPENDDEVELS), $(if $($(devel)-DEVEL-RPMS),rpm --force -Uvh $($(devel)-DEVEL-RPMS);))
- -$(foreach rpm,$($(1)-DEPENDDEVELRPMS), rpm --force -Uvh $($(rpm)-RPM-PATH);)
- $(if $($(1)-RPMBUILD),\
- $($(1)-RPMBUILD) $($(1)-RPMFLAGS) -bs $($(1)_specpath),
- $(RPMBUILD) $($(1)-RPMFLAGS) -bs $($(1)_specpath))
+ @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using SOURCES) " ; date)
+ $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
+ $($(1).rpmbuild) -bs $($(1).specpath)
+ $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
@(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
else
-$($(1)-SRPM): $($(1)_specpath) .rpmmacros $($(1)-CODEBASE)
+$($(1).srpm): $($(1).specpath) .rpmmacros $($(1).codebase)
mkdir -p BUILD SRPMS tmp
@(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using make srpm) " ; date)
- -$(foreach devel,$($(1)-DEPENDDEVELS), $(if $($(devel)-DEVEL-RPMS),rpm --force -Uvh $($(devel)-DEVEL-RPMS);))
- -$(foreach rpm,$($(1)-DEPENDDEVELRPMS), rpm --force -Uvh $($(rpm)-RPM-PATH);)
- make -C $($(1)-CODEBASE) srpm && \
- rm -f SRPMS/$(notdir $($(1)-SRPM)) && \
- ln $($(1)-CODEBASE)/$(notdir $($(1)-SRPM)) SRPMS/$(notdir $($(1)-SRPM))
+ $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
+ make -C $($(1).codebase) srpm SPECFILE=$(HOME)/$($(1).specpath) && \
+ rm -f SRPMS/$(notdir $($(1).srpm)) && \
+ ln $($(1).codebase)/$(notdir $($(1).srpm)) SRPMS/$(notdir $($(1).srpm))
+ $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
@(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
endif
endef
$(foreach package,$(ALL),$(eval $(call target_source_rpm,$(package))))
-### rpmbuild invokation
-ALLRPMS:=$(foreach package,$(ALL),$($(package)-RPMS))
+### binary rpms are made from source rpm
+ALLRPMS:=$(foreach package,$(ALL),$($(package).rpms))
# same as above, mention $(ALL) and not $(ALLRPMS)
rpms: $(ALLRPMS)
@echo $(words $(ALLRPMS)) binary rpms OK
# use tmp dirs when building binary rpm so make remains idempotent
# otherwise SOURCES/ or SPEC gets touched again - which leads to rebuilding
-rpm_use_tmp_dirs = --define "_sourcedir $(HOME)/tmp" --define "_specdir $(HOME)/tmp"
+RPM-USE-TMP-DIRS = --define "_sourcedir $(HOME)/tmp" --define "_specdir $(HOME)/tmp"
+RPM-USE-COMPILE-DIRS = --define "_sourcedir $(HOME)/COMPILE" --define "_specdir $(HOME)/COMPILE"
# usage: build_binary_rpm package
-# xxx hacky - invoke createrepo if DEPENDFILES mentions RPMS/yumgroups.xml
+# xxx hacky - invoke createrepo if DEPEND-FILES mentions RPMS/yumgroups.xml
define target_binary_rpm
-$($(1)-RPMS): $($(1)-SRPM)
- mkdir -p BUILD RPMS tmp
+$($(1).rpms): $($(1).srpm)
+ mkdir -p RPMS tmp
@(echo -n "XXXXXXXXXXXXXXX -- BEG RPM $(1) " ; date)
- $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPENDFILES)), $(createrepo) , )
- $(if $($(1)-RPMBUILD),\
- $($(1)-RPMBUILD) $($(1)-RPMFLAGS) --rebuild $(rpm_use_tmp_dirs) $($(1)-SRPM), \
- $(RPMBUILD) $($(1)-RPMFLAGS) --rebuild $(rpm_use_tmp_dirs) $($(1)-SRPM))
+ $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
+ $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
+ $($(1).rpmbuild) --rebuild $(RPM-USE-TMP-DIRS) $($(1).srpm)
+ $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
@(echo -n "XXXXXXXXXXXXXXX -- END RPM $(1) " ; date)
+# for manual use only - in case we need to investigate the results of an rpmbuild
+$(1)-compile: $($(1).srpm)
+ mkdir -p COMPILE tmp
+ @(echo -n "XXXXXXXXXXXXXXX -- BEG compile $(1) " ; date)
+ $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
+ $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
+ $($(1).rpmbuild) --recompile $(RPM-USE-TMP-DIRS) $($(1).srpm)
+ $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
+ @(echo -n "XXXXXXXXXXXXXXX -- END compile $(1) " ; date)
+.PHONY: $(1)-compile
endef
$(foreach package,$(ALL),$(eval $(call target_binary_rpm,$(package))))
-
### shorthand target
# e.g. make proper -> does propers rpms
# usage shorthand_target package
define target_shorthand
-$(1): $($(package)-RPMS)
+$(1): $($(1).rpms)
.PHONY: $(1)
-$(1)-spec: $($(package)-SPEC)
+$(1)-spec: $($(1)-SPEC)
.PHONY: $(1)-spec
-$(1)-mk: $($(package)-MK)
+$(1)-mk: $($(1)-MK)
.PHONY: $(1)-mk
-$(1)-tarball: $($(package)-TARBALLS)
+$(1)-tarball: $($(1).tarballs)
.PHONY: $(1)-tarball
-$(1)-codebase: $($(package)-CODEBASE)
+$(1)-codebase: $($(1).codebase)
.PHONY: $(1)-source
-$(1)-source: $($(package)-SOURCE)
+$(1)-source: $($(1).source)
.PHONY: $(1)-codebase
-$(1)-rpms: $($(package)-RPMS)
+$(1)-rpms: $($(1).rpms)
.PHONY: $(1)-rpms
-$(1)-srpm: $($(package)-SRPM)
+$(1)-srpm: $($(1).srpm)
.PHONY: $(1)-srpm
endef
$(foreach package,$(ALL),$(eval $(call target_shorthand,$(package))))
-### dependencies
+### file dependencies
define package_depends_on_file
$(1):$(2)
-$($(1)-RPMS):$(2)
+$($(1).srpm):$(2)
endef
define target_dependfiles
-$(foreach file,$($(1)-DEPENDFILES),$(eval $(call package_depends_on_file,$(1),$(file))))
+$(foreach file,$($(1)-DEPEND-FILES),$(eval $(call package_depends_on_file,$(1),$(file))))
endef
+$(foreach package,$(ALL),$(eval $(call target_dependfiles,$(package))))
+
+### package dependencies
define package_depends_on_package
$(1):$(2)
-$(1):$($(2)-RPMS)
-$($(1)-RPMS):$($(2)-RPMS)
+$(1):$($(2).rpms)
+$($(1).srpm):$($(2).rpms)
endef
define target_depends
-$(foreach package,$($(1)-DEPENDS) $($(1)-DEPENDDEVELS),$(eval $(call package_depends_on_package,$(1),$(package))))
+$(foreach package,$($(1)-DEPEND-PACKAGES) $($(1).depend-devel-packages),$(eval $(call package_depends_on_package,$(1),$(package))))
endef
$(foreach package,$(ALL),$(eval $(call target_depends,$(package))))
-$(foreach package,$(ALL),$(eval $(call target_dependfiles,$(package))))
### clean target
# usage: target_clean package
define target_clean
$(1)-clean-codebase:
- rm -rf $($(1)-CODEBASE)
+ rm -rf $($(1).codebase)
.PHONY: $(1)-clean-codebase
CLEANS += $(1)-clean-codebase
$(1)-clean-source:
- rm -rf $($(1)-SOURCE)
+ rm -rf $($(1).source)
.PHONY: $(1)-clean-source
CLEANS += $(1)-clean-source
$(1)-clean-tarball:
- rm -rf $($(1)-TARBALLS)
+ rm -rf $($(1).tarballs)
.PHONY: $(1)-clean-tarball
CLEANS += $(1)-clean-tarball
$(1)-clean-build:
- rm -rf BUILD/$(notdir $($(1)-SOURCE))
+ rm -rf BUILD/$(notdir $($(1).source))
CLEANS += $(1)-clean-build
$(1)-clean-rpms:
- rm -rf $($(1)-RPMS)
+ rm -rf $($(1).rpms)
.PHONY: $(1)-clean-rpms
CLEANS += $(1)-clean-rpms
$(1)-clean-srpm:
- rm -rf $($(1)-SRPM)
+ rm -rf $($(1).srpm)
.PHONY: $(1)-clean-srpm
CLEANS += $(1)-clean-srpm
-$(1)-clean: $(1)-clean-codebase $(1)-clean-source $(1)-clean-tarball $(1)-clean-build $(1)-clean-rpms $(1)-clean-srpm
-.PHONY: $(1)-clean
+$(1)-codeclean: $(1)-clean-source $(1)-clean-tarball $(1)-clean-build $(1)-clean-rpms $(1)-clean-srpm
+$(1)-clean: $(1)-clean-codebase $(1)-codeclean
+.PHONY: $(1)-codeclean $(1)-clean
+$(1)-clean-spec:
+ rm -rf $($(1).specpath)
+.PHONY: $(1)-clean-spec
+$(1)-clean-make:
+ rm -rf MAKE/$(1).mk
+.PHONY: $(1)-clean-make
+$(1)-distclean: $(1)-distclean1 $(1)-distclean2
+$(1)-distclean1: $(1)-clean-spec $(1)-clean-make
+$(1)-distclean2: $(1)-clean
+.PHONY: $(1)-distclean $(1)-distclean1 $(1)-distclean2
endef
$(foreach package,$(ALL),$(eval $(call target_clean,$(package))))
distclean: distclean1 distclean2
.PHONY: distclean1 distclean2 distclean
-# xxx tmp - I cannot use this on my mac for local testing
-ISMACOS=$(findstring Darwin,$(shell uname))
-ifneq "$(ISMACOS)" ""
-#################### produce reliable version information
+develclean:
+ $(RPM-UNINSTALL-DEVEL) $(ALL-DEVEL-RPMS)
+
+####################
+# gather build information for the 'About' page
+# when run from crontab, INIT_CWD not properly set (says /root ..)
+# so, the nightly build passes NIGHTLY_BASE here
+# also store the nightly_base in .base for any post-processing purposes
+myplc-release:
+ @echo 'Creating myplc-release'
+ rm -f $@
+ echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx build info" >> $@
+ $(MAKE) --no-print-directory version-build >> $@
+ echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx svn info" >> $@
+ $(MAKE) --no-print-directory version-svns >> $@
+ echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx rpm info" >> $@
+ $(MAKE) --no-print-directory version-rpms >> $@
+ @echo $(NIGHTLY_BASE) > .base
+
+version-build:
+ @echo -n 'Build build-date: ' ; date '+%Y.%m.%d'
+ @echo -n 'Build build-time: ' ; date '+%H:%M-%Z'
+ @echo -n 'Build build-hostname: ' ; hostname
+ @echo "Build build-base: $(NIGHTLY_BASE)"
+ @echo "Build planetlab-distro: $(PLDISTRO)"
+ @echo "Build planetlab-tags: $(PLDISTROTAGS)"
+ @echo -n 'Build planetlab-tagsid: ' ; fgrep '$$''Id' $(PLDISTROTAGS)
+ @echo "Build target-arch: $(HOSTARCH)"
+ @echo "Build target-distro: $(DISTRO)"
+ @echo "Build target-distroname: $(DISTRONAME)"
+ @echo "Build target-release: $(RELEASE)"
+ @echo "Build target-personality: $(NIGHTLY_PERSONALITY)"
+
+####################
# for a given module
VFORMAT="%30s := %s\n"
-define print_version
-$(1)-version:
+define svn_version_target
+$(1)-version-svn:
@$(if $($(1)-SVNPATH),\
printf $(VFORMAT) $(1)-SVNPATH "$($(1)-SVNPATH)",\
printf $(VFORMAT) $(1)-CVSROOT "$($(1)-CVSROOT)" ; printf $(VFORMAT) $(1)-TAG "$($(1)-TAG)")
$(foreach package,$(ALL), $(eval ALL-MODULES+=$($(package)-MODULES)))
ALL-MODULES:=$(sort $(ALL-MODULES))
-$(foreach module,$(ALL-MODULES), $(eval $(call print_version,$(module))))
+$(foreach module,$(ALL-MODULES), $(eval $(call svn_version_target,$(module))))
-versions: $(foreach module, $(ALL-MODULES), $(module)-version)
-else
-versions:
- @echo "warning : the 'versions' target is not supported on macos"
-endif
+version-svns: $(foreach module, $(ALL-MODULES), $(module)-version-svn)
+
+RFORMAT="%20s :: version=%s release=%s\n"
+define rpm_version_target
+$(1)-version-rpm:
+ @printf $(RFORMAT) $($(1).rpm-name) $($(1).rpm-version) $($(1).rpm-release)
+version-rpms: $(1)-version-rpm
+endef
+
+$(foreach package,$(sort $(ALL)), $(eval $(call rpm_version_target,$(package))))
+
+versions: myplc-release version-build version-svns version-rpms
+.PHONY: versions version-build version-rpms version-svns
#################### include install Makefile
# the default is to use the distro-dependent install file
####################
help:
- @echo "Known pakages are"
- @echo " $(ALL)"
- @echo "Run make in two stages:"
+ @echo "********** Run make in two stages:"
@echo ""
@echo "make stage1=true PLDISTRO=onelab"
@echo " -> extracts all spec files in SPECS/ and mk files in MAKE/"
@echo " as well as save PLDISTRO for subsequent runs"
@echo ""
- @echo "Then you can use the following targets"
- @echo '$ make'
+ @echo "********** Then you can use the following targets"
+ @echo 'make'
@echo " rebuilds everything"
- @echo '$ make util-vserver'
+ @echo 'make util-vserver'
@echo " makes the RPMS related to util-vserver"
@echo " equivalent to 'make util-vserver-rpms'"
@echo ""
- @echo "Or, vertically - step-by-step for a given package"
- @echo '$ make util-vserver-codebase'
+ @echo "********** Or, vertically - step-by-step for a given package"
+ @echo 'make util-vserver-codebase'
@echo " performs codebase extraction in CODEBASES/util-vserver"
- @echo '$ make util-vserver-source'
+ @echo 'make util-vserver-source'
@echo " creates source link in SOURCES/util-vserver-<version>"
- @echo '$ make util-vserver-tarball'
+ @echo 'make util-vserver-tarball'
@echo " creates source tarball in SOURCES/util-vserver-<version>.<tarextension>"
- @echo '$ make util-vserver-rpms'
- @echo " build rpm(s) in RPMS/"
- @echo '$ make util-vserver-srpm'
+ @echo 'make util-vserver-srpm'
@echo " build source rpm in SRPMS/"
+ @echo 'make util-vserver-rpms'
+ @echo " build rpm(s) in RPMS/"
@echo ""
- @echo "Or, horizontally, reach a step for all known packages"
- @echo '$ make codebases'
- @echo '$ make sources'
- @echo '$ make tarballs'
- @echo '$ make rpms'
- @echo '$ make srpms'
+ @echo "********** Or, horizontally, reach a step for all known packages"
+ @echo 'make codebases'
+ @echo 'make sources'
+ @echo 'make tarballs'
+ @echo 'make srpms'
+ @echo 'make rpms'
@echo ""
- @echo "Cleaning examples"
- @echo "$ make clean"
+ @echo "********** Manual targets"
+ @echo "make package-compile"
+ @echo " The regular process uses rpmbuild --rebuild, that performs"
+ @echo " a compilation directory cleanup upon completion. If you need to investigate"
+ @echo " the intermediate compilation directory, use the -compile targets"
+ @echo "********** Cleaning examples"
+ @echo "make clean"
@echo " removes the files made by make"
- @echo "$ make distclean"
+ @echo "make distclean"
@echo " brute-force cleaning, removes entire directories - requires a new stage1"
- @echo "$ make util-vserver-clean"
+ @echo "make develclean"
+ @echo " rpm-uninstalls all devel packages installed during build"
+ @echo ""
+ @echo "make iptables-distclean"
+ @echo " deep clean for a given package"
+ @echo "make iptables-codeclean"
+ @echo " run this if you've made a change in the CODEBASES area for iptables"
+ @echo ""
+ @echo "make util-vserver-clean"
@echo " removes codebase, source, tarball, build, rpm and srpm for util-vserver"
- @echo "$ make util-vserver-clean-codebase"
+ @echo "make util-vserver-clean-codebase"
@echo " and so on for source, tarball, build, rpm and srpm"
+ @echo ""
+ @echo "********** Info examples"
+ @echo "make ++ALL"
+ @echo " Displays the value of a given variable (here ALL)"
+ @echo " with only a single plus sign only the value is displayed"
+ @echo "make ulogd-pkginfo"
+ @echo " Displays know attributes of a package"
+ @echo "make kernel-devel-rpminfo"
+ @echo " Displays know attributes of an rpm"
+ @echo ""
+ @echo "********** Known pakages are"
+ @echo "$(ALL)"
#################### convenience, for debugging only
# make +foo : prints the value of $(foo)
+%: varname=$(subst +,,$@)
+%:
@echo "$($(varname))"
+## package info
+PKGKEYS := tarballs source codebase srpm rpms rpmnames rpm-release rpm-name rpm-version rpm-subversion
+%-pkginfo: package=$(subst -pkginfo,,$@)
+%-pkginfo:
+ @$(foreach key,$(PKGKEYS),echo "$(package).$(key)=$($(package).$(key))";)
+## rpm info
+RPMKEYS := rpm-path package
+%-rpminfo: rpm=$(subst -rpminfo,,$@)
+%-rpminfo:
+ @$(foreach key,$(RPMKEYS),echo "$(rpm).$(key)=$($(rpm).$(key))";)
git://git.onelab.eu / build.git / blobdiff