#
#################### (planetlab) distributions
#
-# (*) the default distribution is called 'planetlab'
-# (*) you may define an alternative distribution, e.g. onelab
-# in this case you need to
-# (*) create onelab.mk that defines your *packages* (see below)
-# (*) create onelab-tags.mk that defines where to fetch your *modules*
-# (*) create your main yumgroups.xml as groups/<distro>.xml
-# (*) there are also various places where a set of modules are defined.
-# check for .lst files in the various modules that build root images
-# and mimic what's done for planetlab
+# (*) see README-pldistros.txt
# (*) then you need to run
# make stage1=true PLDISTRO=onelab
#
#
# the build defines some make variables that are extracted from spec files
# see for example
-# (*) $ make ulogd.pkginfo
+# (*) $ make ulogd-pkginfo
# to see the list f variables attached to a given package
-# (*) $ make kernel-devel.rpminfo
+# (*) $ make kernel-devel-rpminfo
# to see the list f variables attached to a given rpm
#
####################
+# exported to spec files as plrelease
+PLANETLAB_RELEASE = 4.2
+
#
# Default values
#
HOSTARCH := $(shell uname -i)
DISTRO := $(shell ./getdistro.sh)
RELEASE := $(shell ./getrelease.sh)
+DISTRONAME := $(shell ./getdistroname.sh)
RPM-INSTALL-DEVEL := rpm --force -Uvh
# cannot force rpm -e
RPM-UNINSTALL-DEVEL := rpm -e
endif
endif
-### yumgroups.xml
-# the source
-ifndef YUMGROUPS
-YUMGROUPS := groups/$(PLDISTRO).xml
-endif
-
-RPMS/yumgroups.xml: $(YUMGROUPS)
+### yumgroups.xml : compute from all known .pkgs files
+RPMS/yumgroups.xml:
mkdir -p RPMS
- install -D -m 644 $(YUMGROUPS) $@
+ ./yumgroups.sh $(PLDISTRO) > $@
createrepo = createrepo --quiet -g yumgroups.xml RPMS/
$(1).spec = $(notdir $($(1)-SPEC))
$(1).specpath = SPECS/$(1).spec
$(1).module = $(firstword $($(1)-MODULES))
+$(1)-SVNPATH = $(strip $($(1)-SVNPATH))
endef
$(foreach package, $(ALL), $(eval $(call stage1_variables,$(package))))
#
define package_hasdate
$(1).has-date = $(if $(subst myplc,,$(1)), \
- $(if $($(1)-SVNPATH),\
- $(if $(findstring /trunk,$($(1)-SVNPATH)),yes,),\
- $(if $(findstring HEAD,$($(1)-TAG)),yes,)), \
+ $(if $($($(1).module)-SVNPATH),\
+ $(if $(findstring /trunk,$($($(1).module)-SVNPATH)),yes,),\
+ $(if $(findstring HEAD,$($($(1).module)-TAG)),yes,)), \
yes)
endef
$(foreach package, $(ALL), $(eval $(call package_hasdate,$(package))))
+### the common header for generated specfiles
+# useful when trying new specfiles manually
+header.spec:
+ (echo -n "# Generated by planetlab build from $($(1)-SPEC) on " ; date) > $@
+ echo "%define distro $(DISTRO)" >> $@
+ echo "%define distrorelease $(RELEASE)" >> $@
+ echo "%define distroname $(DISTRONAME)" >> $@
+ echo "%define pldistro $(PLDISTRO)" >> $@
+ echo "%define plrelease $(PLANETLAB_RELEASE)" >> $@
+
### extract spec file from scm
define target_spec
-$($(1).specpath):
+$($(1).specpath): header.spec
mkdir -p SPECS
- (echo -n "# Generated by planetlab build from $($(1)-SPEC) on " ; date) > $($(1).specpath)
- echo "%define distroname $(DISTRO)" >> $($(1).specpath)
- echo "%define distrorelease $(RELEASE)" >> $($(1).specpath)
- echo "%define pldistro $(PLDISTRO)" >> $($(1).specpath)
+ cat header.spec > $($(1).specpath)
$(if $($(1).has-date),echo "%define date $(shell date +%Y.%m.%d)" >> $($(1).specpath),)
$(if $($(1)-SPECVARS), \
$(foreach line,$($(1)-SPECVARS), \
echo "%define" $(word 1,$(subst =, ,$(line))) "$(word 2,$(subst =, ,$(line)))" >> $($(1).specpath) ;))
- echo "# included from codebase specfile" >> $($(1).specpath)
+ echo "# included from $($(1)-SPEC)" >> $($(1).specpath)
$(if $($($(1).module)-SVNPATH),\
svn cat $($($(1).module)-SVNPATH)/$($(1)-SPEC) >> $($(1).specpath) || rm $($(1).specpath),\
cvs -d $($($(1).module)-CVSROOT) checkout \
# use tmp dirs when building binary rpm so make remains idempotent
# otherwise SOURCES/ or SPEC gets touched again - which leads to rebuilding
RPM-USE-TMP-DIRS = --define "_sourcedir $(HOME)/tmp" --define "_specdir $(HOME)/tmp"
+RPM-USE-COMPILE-DIRS = --define "_sourcedir $(HOME)/COMPILE" --define "_specdir $(HOME)/COMPILE"
# usage: build_binary_rpm package
# xxx hacky - invoke createrepo if DEPEND-FILES mentions RPMS/yumgroups.xml
define target_binary_rpm
$($(1).rpms): $($(1).srpm)
- mkdir -p BUILD RPMS tmp
+ mkdir -p RPMS tmp
@(echo -n "XXXXXXXXXXXXXXX -- BEG RPM $(1) " ; date)
$(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
$(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
$($(1).rpmbuild) --rebuild $(RPM-USE-TMP-DIRS) $($(1).srpm)
$(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
@(echo -n "XXXXXXXXXXXXXXX -- END RPM $(1) " ; date)
+# for manual use only - in case we need to investigate the results of an rpmbuild
+$(1)-compile: $($(1).srpm)
+ mkdir -p COMPILE tmp
+ @(echo -n "XXXXXXXXXXXXXXX -- BEG compile $(1) " ; date)
+ $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
+ $(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
+ $($(1).rpmbuild) --recompile $(RPM-USE-TMP-DIRS) $($(1).srpm)
+ $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
+ @(echo -n "XXXXXXXXXXXXXXX -- END compile $(1) " ; date)
+.PHONY: $(1)-compile
endef
$(foreach package,$(ALL),$(eval $(call target_binary_rpm,$(package))))
-
### shorthand target
# e.g. make proper -> does propers rpms
# usage shorthand_target package
define target_shorthand
-$(1): $($(package).rpms)
+$(1): $($(1).rpms)
.PHONY: $(1)
-$(1)-spec: $($(package)-SPEC)
+$(1)-spec: $($(1)-SPEC)
.PHONY: $(1)-spec
-$(1)-mk: $($(package)-MK)
+$(1)-mk: $($(1)-MK)
.PHONY: $(1)-mk
-$(1)-tarball: $($(package).tarballs)
+$(1)-tarball: $($(1).tarballs)
.PHONY: $(1)-tarball
-$(1)-codebase: $($(package).codebase)
+$(1)-codebase: $($(1).codebase)
.PHONY: $(1)-source
-$(1)-source: $($(package).source)
+$(1)-source: $($(1).source)
.PHONY: $(1)-codebase
-$(1)-rpms: $($(package).rpms)
+$(1)-rpms: $($(1).rpms)
.PHONY: $(1)-rpms
-$(1)-srpm: $($(package).srpm)
+$(1)-srpm: $($(1).srpm)
.PHONY: $(1)-srpm
endef
####################
# gather build information for the 'About' page
-# uses INIT_CWD to try and guess the vserver location
+# when run from crontab, INIT_CWD not properly set (says /root ..)
+# so, the nightly build passes NIGHTLY_BASE here
+# also store the nightly_base in .base for any post-processing purposes
myplc-release:
@echo 'Creating myplc-release'
rm -f $@
$(MAKE) --no-print-directory version-svns >> $@
echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx rpm info" >> $@
$(MAKE) --no-print-directory version-rpms >> $@
+ @echo $(NIGHTLY_BASE) > .base
version-build:
- @echo -n 'Build bdate: ' ; date '+%Y.%m.%d'
- @echo -n 'Build btime: ' ; date '+%H:%M'
- @echo -n 'Build bhostname: ' ; hostname
- @echo "Build blocation: $(INIT_CWD)"
- @echo "Build blocation2: $${INIT_CWD}"
- @echo -n 'Build tags file: ' ; fgrep '$$''Id' $(PLDISTROTAGS)
- @echo "Build tarch: $(HOSTARCH)"
- @echo "Build tdistro: $(DISTRO)"
- @echo "Build trelease: $(RELEASE)"
+ @echo -n 'Build build-date: ' ; date '+%Y.%m.%d'
+ @echo -n 'Build build-time: ' ; date '+%H:%M-%Z'
+ @echo -n 'Build build-hostname: ' ; hostname
+ @echo "Build build-base: $(NIGHTLY_BASE)"
+ @echo "Build planetlab-distro: $(PLDISTRO)"
+ @echo "Build planetlab-tags: $(PLDISTROTAGS)"
+ @echo -n 'Build planetlab-tagsid: ' ; fgrep '$$''Id' $(PLDISTROTAGS)
+ @echo "Build target-arch: $(HOSTARCH)"
+ @echo "Build target-distro: $(DISTRO)"
+ @echo "Build target-distroname: $(DISTRONAME)"
+ @echo "Build target-release: $(RELEASE)"
+ @echo "Build target-personality: $(NIGHTLY_PERSONALITY)"
####################
# for a given module
$(foreach package,$(sort $(ALL)), $(eval $(call rpm_version_target,$(package))))
-versions: version-build version-svns version-rpms
+versions: myplc-release version-build version-svns version-rpms
.PHONY: versions version-build version-rpms version-svns
#################### include install Makefile
@echo 'make srpms'
@echo 'make rpms'
@echo ""
+ @echo "********** Manual targets"
+ @echo "make package-compile"
+ @echo " The regular process uses rpmbuild --rebuild, that performs"
+ @echo " a compilation directory cleanup upon completion. If you need to investigate"
+ @echo " the intermediate compilation directory, use the -compile targets"
@echo "********** Cleaning examples"
@echo "make clean"
@echo " removes the files made by make"
@echo "make ++ALL"
@echo " Displays the value of a given variable (here ALL)"
@echo " with only a single plus sign only the value is displayed"
- @echo "make ulogd.pkginfo"
+ @echo "make ulogd-pkginfo"
@echo " Displays know attributes of a package"
- @echo "make kernel-devel.rpminfo"
+ @echo "make kernel-devel-rpminfo"
@echo " Displays know attributes of an rpm"
@echo ""
@echo "********** Known pakages are"
@echo "$($(varname))"
## package info
PKGKEYS := tarballs source codebase srpm rpms rpmnames rpm-release rpm-name rpm-version rpm-subversion
-%.pkginfo: package=$(subst .pkginfo,,$@)
-%.pkginfo:
+%-pkginfo: package=$(subst -pkginfo,,$@)
+%-pkginfo:
@$(foreach key,$(PKGKEYS),echo "$(package).$(key)=$($(package).$(key))";)
## rpm info
RPMKEYS := rpm-path package
-%.rpminfo: rpm=$(subst .rpminfo,,$@)
-%.rpminfo:
+%-rpminfo: rpm=$(subst -rpminfo,,$@)
+%-rpminfo:
@$(foreach key,$(RPMKEYS),echo "$(rpm).$(key)=$($(rpm).$(key))";)
git://git.onelab.eu / build.git / blobdiff