# a set of *packages* that this package depends on
# (*) package-DEPEND-DEVEL-RPMS
# a set of *rpms* that the build will rpm-install before building <package>
+# this is intended to denote local rpms, i.e. ones that are results of our own build
+# stock rpms should be mentioned in config.planetlab/devel.pkgs
# (*) package-DEPEND-FILES
# a set of files that the package depends on - and that make needs to know about
# if this contains RPMS/yumgroups.xml, then the toplevel RPMS's index
####################
# exported to spec files as plrelease
-PLANETLAB_RELEASE = 4.2
+PLANETLAB_RELEASE = 5.0
#
# Default values
RELEASE := $(shell ./getrelease.sh)
DISTRONAME := $(shell ./getdistroname.sh)
RPM-INSTALL-DEVEL := rpm --force -Uvh
-# cannot force rpm -e
+# uninstall -- cannot force rpm -e
+# need to ignore result, kernel-headers cannot be uninstalled as glibc depends on it
RPM-UNINSTALL-DEVEL := rpm -e
+REMOTE-PLDISTROS="gnuradio"
+
#################### Makefile
# Default target
all:
RPMBUILD := rpmbuild
export CVS_RSH := ssh
-########## pldistro.mk holds PLDISTRO - it is generated at stage1 (see below)
+########## savedpldistro.mk holds PLDISTRO - it is generated at stage1 (see below)
ifeq "$(stage1)" ""
-include pldistro.mk
+include savedpldistro.mk
+endif
+
+# when re-running the nightly build after failure, we need to gather the former values
+# do this by running make stage1=skip +PLDISTRO
+ifeq "$(stage1)" "skip"
+include savedpldistro.mk
endif
#################### include onelab.mk
# so now the nightly build script sets this to what it is currently using
# we set a default in case we run the build manually:
# if the local directory was svn checked out, then use the corresponding URL
-default-build-SVNPATH := $(shell svn info 2> /dev/null | grep URL: | awk '{print $2;}')
+svn-info-url-line := $(shell svn info 2> /dev/null | grep URL:)
+default-build-SVNPATH := $(lastword $(svn-info-url-line))
# otherwise, use this hard-coded default
ifeq "$(default-build-SVNPATH)" ""
default-build-SVNPATH := http://svn.planet-lab.org/svn/build/trunk
# use default if necessary
build-SVNPATH ?= $(default-build-SVNPATH)
+####################
+define remote_pldistro
+$(1).mk: config.$(1)/$(1).mk
+ @echo 'creating $(1) from config subdir'
+ cp config.$(1)/$(1).mk $(1).mk
+
+$(2).mk: config.$(1)/$(2).mk
+ @echo 'creating $(1) tags from config subdir'
+ cp config.$(1)/$(2).mk $(2).mk
+
+config.$(1)/$(1).mk: config.$(1)
+config.$(1)/$(2).mk: config.$(1)
+
+config.$(1): config.$(1).svnpath
+ @echo "Fetching details for pldistro $(1)"
+ svn export $(shell grep -v "^#" config.$(1).svnpath) config.$(1)
+
+DISTCLEANS += $(1).mk $(2).mk config.$(1)
+
+endef
+
+$(eval $(call remote_pldistro,gnuradio,gnuradio-tags))
+
########## stage1 and stage1iter
# extract specs and compute .mk files by running
# make stage1=true
define target_mk
MAKE/$(1).mk: $($(1).specpath) spec2make .rpmmacros
mkdir -p MAKE
- ./spec2make $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk
- @if [ -z MAKE/$(1).mk ] ; then rm MAKE/$(1).mk ; exit 1 ; fi
+ ./spec2make $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk || { rm MAKE/$(1).mk; exit 1; }
endef
$(foreach package,$(ALL),$(eval $(call target_mk,$(package))))
# stores PLDISTRO in a file
# this is done at stage1. later run wont get confused
-pldistro.mk:
+savedpldistro.mk:
echo "PLDISTRO:=$(PLDISTRO)" > $@
echo "PLDISTROTAGS:=$(PLDISTROTAGS)" >> $@
+ echo "build-SVNPATH:=$(build-SVNPATH)" >> $@
+ echo "PERSONALITY:=$(PERSONALITY)" >> $@
+ echo "MAILTO:=$(MAILTO)" >> $@
+ echo "BASE:=$(BASE)" >> $@
-savepldistro: pldistro.mk
-.PHONY: savepldistro
+savedpldistro: savedpldistro.mk
+.PHONY: savedpldistro
# always refresh this
-all: savepldistro
+all: savedpldistro
#################### regular make
.PHONY: srpms
# usage: target_source_rpm package
-# select upon the package name, whether it contains srpm or not
define target_source_rpm
ifeq "$($(1)-BUILD-FROM-SRPM)" ""
$($(1).srpm): $($(1).specpath) .rpmmacros $($(1).tarballs)
@(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using SOURCES) " ; date)
$(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
$($(1).rpmbuild) -bs $($(1).specpath)
- $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
+ -$(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
@(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
else
$($(1).srpm): $($(1).specpath) .rpmmacros $($(1).codebase)
make -C $($(1).codebase) srpm SPECFILE=$(HOME)/$($(1).specpath) && \
rm -f SRPMS/$(notdir $($(1).srpm)) && \
ln $($(1).codebase)/$(notdir $($(1).srpm)) SRPMS/$(notdir $($(1).srpm))
- $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
+ -$(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
@(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
endif
endef
$(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
$(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
$($(1).rpmbuild) --rebuild $(RPM-USE-TMP-DIRS) $($(1).srpm)
- $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
+ -$(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
@(echo -n "XXXXXXXXXXXXXXX -- END RPM $(1) " ; date)
# for manual use only - in case we need to investigate the results of an rpmbuild
$(1)-compile: $($(1).srpm)
$(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
$(if $($(1).all-devel-rpm-paths), $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
$($(1).rpmbuild) --recompile $(RPM-USE-TMP-DIRS) $($(1).srpm)
- $(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
+ -$(if $($(1)-DEPEND-DEVEL-RPMS), $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
@(echo -n "XXXXXXXXXXXXXXX -- END compile $(1) " ; date)
.PHONY: $(1)-compile
endef
### brute force clean
distclean1:
- rm -rf pldistro.mk .rpmmacros spec2make header.spec SPECS MAKE
+ rm -rf savedpldistro.mk .rpmmacros spec2make header.spec SPECS MAKE $(DISTCLEANS)
distclean2:
rm -rf CODEBASES SOURCES BUILD RPMS SRPMS tmp
distclean: distclean1 distclean2
.PHONY: distclean1 distclean2 distclean
develclean:
- $(RPM-UNINSTALL-DEVEL) $(ALL-DEVEL-RPMS)
+ -$(RPM-UNINSTALL-DEVEL) $(ALL-DEVEL-RPMS)
####################
# gather build information for the 'About' page
# when run from crontab, INIT_CWD not properly set (says /root ..)
-# so, the nightly build passes NIGHTLY_BASE here
-# also store the nightly_base in .base for any post-processing purposes
+# so, the nightly build passes BASE here
+# also store BASE in .base for any post-processing purposes
myplc-release:
@echo 'Creating myplc-release'
rm -f $@
$(MAKE) --no-print-directory version-svns >> $@
echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx rpm info" >> $@
$(MAKE) --no-print-directory version-rpms >> $@
- @echo $(NIGHTLY_BASE) > .base
+ @echo $(BASE) > .base
version-build:
@echo -n 'Build build-date: ' ; date '+%Y.%m.%d'
@echo -n 'Build build-time: ' ; date '+%H:%M-%Z'
@echo -n 'Build build-hostname: ' ; hostname
- @echo "Build build-base: $(NIGHTLY_BASE)"
+ @echo "Build build-base: $(BASE)"
@echo "Build planetlab-distro: $(PLDISTRO)"
@echo "Build planetlab-tags: $(PLDISTROTAGS)"
@echo -n 'Build planetlab-tagsid: ' ; fgrep '$$''Id' $(PLDISTROTAGS)
@echo "Build target-distro: $(DISTRO)"
@echo "Build target-distroname: $(DISTRONAME)"
@echo "Build target-release: $(RELEASE)"
- @echo "Build target-personality: $(NIGHTLY_PERSONALITY)"
+ @echo "Build target-personality: $(PERSONALITY)"
####################
# for a given module
versions: myplc-release version-build version-svns version-rpms
.PHONY: versions version-build version-rpms version-svns
-#################### include install Makefile
-# the default is to use the distro-dependent install file
-# however the main distro file can redefine PLDISTROINSTALL
-ifndef PLDISTROINSTALL
-PLDISTROINSTALL := $(PLDISTRO)-install.mk
-endif
-# only if present
--include $(PLDISTROINSTALL)
-
#################### package info
PKGKEYS := tarballs source codebase srpm rpms rpmnames rpm-release rpm-name rpm-version rpm-subversion
%-pkginfo: package=$(subst -pkginfo,,$@)
.PHONY: info packages modules branches module-tools
####################
-testsvnpath:
+tests_svnpath:
@$(if $(TESTS_SVNPATH), echo $(TESTS_SVNPATH) > $@, \
echo "http://svn.planet-lab.org/svn/tests/trunk" > $@)
+
####################
help:
@echo "********** Run make in two stages:"