DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
DEFAULT_SVNPATH="http://svn.planet-lab.org/svn/build/trunk"
DEFAULT_TESTSVNPATH="http://svn.planet-lab.org/svn/tests/trunk/system/"
-DEFAULT_IFNAME=lo
+DEFAULT_TESTCONFIG="default"
+DEFAULT_IFNAME=eth0
# web publishing results
DEFAULT_WEBPATH="/build/@PLDISTRO@/"
# for the test part
TESTBUILDURL="http://build.one-lab.org/"
-TESTBOX=onelab-test.inria.fr
-TESTBOXSSH=root@onelab-test.inria.fr
+TESTBOXSSH=root@testbox.one-lab.org
####################
# assuming vserver runs in UTC
DATE=$(date +'%Y.%m.%d')
mkdir -p ${WEBPATH}
cp $LOG ${WEBLOG}
summary $LOG >> ${WEBLOG}
- (echo -n "============================== $COMMAND: failure at " ; date ; tail -c 20k $WEBLOG) > ${WEBLOG}.ko
+ (echo -n "============================== $COMMAND: failure at " ; date ; tail -c 30k $WEBLOG) > ${WEBLOG}.ko
if [ -n "$MAILTO" ] ; then
- tail -c 20k ${WEBLOG} | mail -s "Failures for build ${BASE}" $MAILTO
+ tail -c 30k ${WEBLOG} | mail -s "Failures for build ${BASE}" $MAILTO
fi
exit 1
}
mkdir -p ${WEBPATH}
cp $LOG ${WEBLOG}
summary $LOG >> ${WEBLOG}
- touch ${WEBLOG}.ok
+ if [ -n "$DO_TEST" ] ; then
+ echo "Successfully built and tested - see testlogs for details" > ${WEBLOG}.pass
+ rm -f ${WEBLOG}.ok
+ else
+ echo "Successfully built"> ${WEBLOG}.ok
+ fi
if [ -n "$MAILTO" ] ; then
(echo "$PLDISTRO ($BASE) build for $FCDISTRO completed on $(date)" ) | mail -s "Successful build for ${BASE}" $MAILTO
fi
exit 0
}
-# parses ifconfig's output to find out ip address and mask
-# will then be passed to vserver as e.g. --interface 138.96.250.126/255.255.0.0
-# default is to use lo, that's enough for local mirrors
-# use -i eth0 in case your fedora mirror is on a separate box on the network
-function vserverIfconfig () {
- ifname=$1; shift
- local result=""
- line=$(ifconfig $ifname 2> /dev/null | grep 'inet addr')
- if [ -n "$line" ] ; then
- set $line
- for word in "$@" ; do
- addr=$(echo $word | sed -e s,[aA][dD][dD][rR]:,,)
- mask=$(echo $word | sed -e s,[mM][aA][sS][kK]:,,)
- if [ "$word" != "$addr" ] ; then
- result="${addr}"
- elif [ "$word" != "$mask" ] ; then
- result="${result}/${mask}"
- fi
- done
- fi
- if [ -z "$result" ] ; then
- echo "vserverIfconfig failed to locate $ifname"
- exit 1
- else
- echo $result
- fi
-}
-
# run in the vserver - do not manage success/failure, will be done from the root ctx
function build () {
set -x
echo -n "============================== Starting $COMMAND:runtest on $(date)"
### the URL to the myplc package
- rpm=$( (cd /vservers/$BASE/build/RPMS/i386 ; ls myplc-[0-9]*.rpm) )
+ rpm=$( find /vservers/$BASE/build/RPMS -name 'myplc-[0-9]*' )
if [ ${#rpm[@]} != 1 ] ; then
echo "$COMMAND: Cannot locate rpm for testing"
failure
exit 1
fi
- url=${TESTBUILDURL}${PLDISTRO}/${BASE}/RPMS/i386/${rpm}
+ url=$(echo $rpm | sed -e "s,/vservers/$BASE/build,${TESTBUILDURL}${PLDISTRO}/${BASE},")
- # compute test directory name on test box
- testdir=test-${BASE}
+ # test directory name on test box
+ testdir=${BASE}
# clean it
ssh ${TESTBOXSSH} rm -rf ${testdir}
# check it out
ssh ${TESTBOXSSH} svn co ${TESTSVNPATH} ${testdir}
# invoke test on testbox - pass url and build url - so the tests can use vtest-init-vserver.sh
- ssh 2>&1 ${TESTBOXSSH} python -u ${testdir}/runtest --build ${SVNPATH} --url ${url} --all
-
- if [ "$?" != 0 ] ; then
+ configs=""
+ for config in ${TESTCONFIG} ; do
+ configs="$configs --config $config"
+ done
+
+ # need to proceed despite of set -e
+ success=true
+ ssh 2>&1 ${TESTBOXSSH} ${testdir}/runtest --build ${SVNPATH} --url ${url} $configs --all || success=
+
+ # gather logs in the vserver
+ mkdir -p /vservers/$BASE/build/testlogs
+ ssh 2>&1 ${TESTBOXSSH} tar -C ${testdir}/logs -cf - . | tar -C /vservers/$BASE/build/testlogs -xf - || true
+ # push them to the build web
+ rsync --archive --delete /vservers/$BASE/build/testlogs/ $WEBPATH/$BASE/testlogs/
+ chmod -R a+r $WEBPATH/$BASE/testlogs/
+
+ if [ -z "$success" ] ; then
failure
fi
echo "Usage: $COMMAND [option] make-targets"
echo "This is $REVISION"
echo "Supported options"
- echo " -n dry-run : -n passed to make - vserver gets created though - no mail sent"
echo " -f fcdistro - defaults to $DEFAULT_FCDISTRO"
echo " -d pldistro - defaults to $DEFAULT_PLDISTRO"
echo " -p personality - defaults to $DEFAULT_PERSONALITY"
echo " -t pldistrotags - defaults to \${PLDISTRO}-tags.mk"
echo " -r tagsrelease - a release number that refers to PLDISTROTAGS - defaults to HEAD"
echo " -s svnpath - where to fetch the build module"
- echo " -o : overwrite - re-run in base directory, do not create vserver"
- echo " -m mailto"
- echo " -a makevar=value - space in values are not supported"
+ echo " -x testsvnpath - defaults to $DEFAULT_TESTSVNPATH"
+ echo " -c testconfig - defaults to $DEFAULT_TESTCONFIG"
echo " -w webpath - defaults to $DEFAULT_WEBPATH"
- echo " -i ifname - defaults to $DEFAULT_IFNAME - set to e.g. eth0 for non-local mirrors"
+ echo " -m mailto - no default"
+ echo " -O : overwrite - re-run in base directory, do not re-create vserver"
echo " -B : run build only"
echo " -T : run test only"
- echo " -x testsvnpath - defaults to $DEFAULT_TESTSVNPATH"
+ echo " -n dry-run : -n passed to make - vserver gets created though - no mail sent"
echo " -v : be verbose"
echo " -7 : uses weekday-@FCDISTRO@ as base"
+ echo " -a makevar=value - space in values are not supported"
+ echo " -i ifname - defaults to $DEFAULT_IFNAME - used to determine local IP"
exit 1
}
set -e
- # preserve arguments for passing them again later
- declare -a argv
- for arg in "$@"; do argv=(${argv[@]} "$arg") ; done
-
# parse arguments
MAKEVARS=()
DRY_RUN=
DO_BUILD=true
DO_TEST=true
- while getopts "nf:d:b:p:t:r:s:om:a:w:i:BTvh7" opt ; do
+ while getopts "f:d:p:b:t:r:s:x:c:w:m:OBTnv7a:i:" opt ; do
case $opt in
- n) DRY_RUN="-n" ;;
f) FCDISTRO=$OPTARG ;;
d) PLDISTRO=$OPTARG ;;
p) PERSONALITY=$OPTARG ;;
t) PLDISTROTAGS=$OPTARG ;;
r) TAGSRELEASE=$OPTARG ;;
s) SVNPATH=$OPTARG ;;
- o) OVERWRITEMODE=true ;;
- m) MAILTO=$OPTARG ;;
- a) MAKEVARS=(${MAKEVARS[@]} "$OPTARG") ;;
+ x) TESTSVNPATH=$OPTARG ;;
+ c) TESTCONFIG="$TESTCONFIG $OPTARG" ;;
w) WEBPATH=$OPTARG ;;
- i) IFNAME=$OPTARG ;;
+ m) MAILTO=$OPTARG ;;
+ O) OVERWRITEMODE=true ;;
B) DO_TEST= ;;
T) DO_BUILD= ; OVERWRITEMODE=true ;;
- x) TESTSVNPATH=$OPTARG ;;
+ n) DRY_RUN="-n" ;;
v) set -x ;;
7) BASE="$(date +%a|tr A-Z a-z)-@FCDISTRO@" ;;
+ a) MAKEVARS=(${MAKEVARS[@]} "$OPTARG") ;;
+ i) IFNAME=$OPTARG ;;
h|*) usage ;;
esac
done
- shift $(($OPTIND - 1))
+ # preserve options for passing them again later, together with expanded base
+ declare -a options
+ toshift=$(($OPTIND - 1))
+ arg=1; while [ $arg -le $toshift ] ; do options=(${options[@]} "$1") ; shift; arg=$(($arg+1)) ; done
+
MAKETARGETS="$@"
# set defaults
[ -z "$IFNAME" ] && IFNAME="$DEFAULT_IFNAME"
[ -z "$SVNPATH" ] && SVNPATH="$DEFAULT_SVNPATH"
[ -z "$TESTSVNPATH" ] && TESTSVNPATH="$DEFAULT_TESTSVNPATH"
+ [ -z "$TESTCONFIG" ] && TESTCONFIG="$DEFAULT_TESTCONFIG"
[ -n "$DRY_RUN" ] && MAILTO=""
set -x
echo "XXXXXXXXXX $COMMAND: using existing vserver $BASE" $(date)
show_env
+ # start in case e.g. we just rebooted
+ vserver ${BASE} start || :
# update build
vserver ${BASE} exec svn update /build
else
svn export $SVNPATH $tmpdir
# Create vserver
cd $tmpdir
- localip=$(vserverIfconfig $IFNAME)
- ./vbuild-init-vserver.sh -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} ${BASE} -- --interface $localip
+ ./vbuild-init-vserver.sh -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} -i ${IFNAME} ${BASE}
# cleanup
cd -
rm -rf $tmpdir
# invoke this command in the vserver for building (-T)
vserver ${BASE} exec chmod +x /build/$COMMAND
- vserver ${BASE} exec /build/$COMMAND "${argv[@]}" -b "${BASE}"
+ vserver ${BASE} exec /build/$COMMAND "${options[@]}" -b "${BASE}" $MAKETARGETS
fi
# publish to the web so runtest can find them
rm -rf $WEBPATH/$BASE ; mkdir -p $WEBPATH/$BASE/{RPMS,SRPMS}
rsync --archive --delete --verbose /vservers/$BASE/build/RPMS/ $WEBPATH/$BASE/RPMS/
rsync --archive --delete --verbose /vservers/$BASE/build/SRPMS/ $WEBPATH/$BASE/SRPMS/
+ # publish myplc-release
+ rsync --verbose /vservers/$BASE/build/myplc-release $WEBPATH/$BASE
if [ -n "$DO_TEST" ] ; then
runtest