#!/bin/bash
-REVISION=$(echo '$Revision$' | sed -e 's,\$,,g' -e 's,^\w*:\s,,' )
+REVISION=$(echo '$Revision: 18120 $' | sed -e 's,\$,,g' -e 's,^\w*:\s,,' )
COMMANDPATH=$0
COMMAND=$(basename $0)
# default values, tunable with command-line options
-DEFAULT_FCDISTRO=fc6
+DEFAULT_FCDISTRO=f14
DEFAULT_PLDISTRO=planetlab
-DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@"
-DEFAULT_SVNPATH="http://svn.planet-lab.org/svn/build/trunk"
-
-DEFAULT_MAILTO_onelab="onelab-build@one-lab.org"
-# tmp - send all mails to onelab
-#DEFAULT_MAILTO_planetlab="devel@planet-lab.org"
-DEFAULT_MAILTO_planetlab=$DEFAULT_MAILTO_onelab
-
-# web publishing results
-DEFAULT_WEBPATH="/build/@PLDISTRO@/@BASE@"
-
-# for the test part
-TESTBUILDURL="http://build.one-lab.org/"
-TESTBOX=onelab-test.inria.fr
-TESTBOXSSH=root@onelab-test.inria.fr
-TESTSVNPATH="http://svn.one-lab.org/new_plc_api/trunk/plctest"
-TESTSCRIPT=TestMain.py
+DEFAULT_PERSONALITY=linux64
+DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
+DEFAULT_BUILD_SCM_URL="git://git.onelab.eu/build"
+DEFAULT_IFNAME=eth0
+
+# default gpg path used in signing yum repo
+DEFAULT_GPGPATH="/etc/planetlab"
+# default email to use in gpg secring
+DEFAULT_GPGUID="root@$( /bin/hostname )"
+
+DEFAULT_TESTCONFIG="default"
+# for passing args to run_log
+RUN_LOG_EXTRAS=""
+
+# for publishing results, and the tests settings
+x=$(hostname)
+y=$(hostname|sed -e s,inria,,)
+# INRIA defaults
+if [ "$x" != "$y" ] ; then
+ DEFAULT_WEBPATH="/build/@PLDISTRO@/"
+ DEFAULT_TESTBUILDURL="http://build.onelab.eu/"
+ # this is where the buildurl is pointing towards
+ DEFAULT_WEBROOT="/build/"
+ DEFAULT_TESTMASTER="testmaster.onelab.eu"
+else
+ DEFAULT_WEBPATH="/build/@FCDISTRO@/@PLDISTRO@/"
+ DEFAULT_TESTBUILDURL="http://build.planet-lab.org/"
+ # this is where the buildurl is pointing towards
+ DEFAULT_WEBROOT="/build/"
+ DEFAULT_TESTMASTER="manager.test.planet-lab.org"
+fi
+
####################
# assuming vserver runs in UTC
-DATE=$(date -u +'%Y.%m.%d')
+DATE=$(date +'%Y.%m.%d')
+
+# temporary - wrap a quick summary of suspicious stuff
+# this is to focus on installation that go wrong
+# use with care, a *lot* of other things can go bad as well
+function summary () {
+ from=$1; shift
+ echo "******************** BEG SUMMARY"
+ python - $from <<EOF
+#!/usr/bin/env python
+# read a full log and tries to extract the interesting stuff
+
+import sys,re
+m_show_line=re.compile(".* (BEG|END) (RPM|VSERVER).*|.*'boot'.*|\* .*| \* .*|.*is not installed.*|.*PROPFIND.*|.* (BEG|END).*:run_log.*|.* Within vserver (BEG|END) .*|.* MAIN (BEG|END).*")
+m_installing_any=re.compile('\r (Installing:[^\]]*]) ')
+m_installing_err=re.compile('\r (Installing:[^\]]*])(..+)')
+m_installing_end=re.compile('Installed:.*')
+m_installing_doc1=re.compile("(.*)install-info: No such file or directory for /usr/share/info/\S+(.*)")
+m_installing_doc2=re.compile("(.*)grep: /usr/share/info/dir: No such file or directory(.*)")
+
+def summary (filename):
+
+ try:
+ if filename=="-":
+ filename="stdin"
+ f=sys.stdin
+ else:
+ f=open(filename)
+ echo=False
+ for line in f.xreadlines():
+ # first off : discard warnings related to doc
+ if m_installing_doc1.match(line):
+ (begin,end)=m_installing_doc1.match(line).groups()
+ line=begin+end
+ if m_installing_doc2.match(line):
+ (begin,end)=m_installing_doc2.match(line).groups()
+ line=begin+end
+ # unconditionnally show these lines
+ if m_show_line.match(line):
+ print '>>>',line,
+ # an 'installing' line with messages afterwards : needs to be echoed
+ elif m_installing_err.match(line):
+ (installing,error)=m_installing_err.match(line).groups()
+ print '>>>',installing
+ print '>>>',error
+ echo=True
+ # closing an 'installing' section
+ elif m_installing_end.match(line):
+ echo=False
+ # any 'installing' line
+ elif m_installing_any.match(line):
+ if echo:
+ installing=m_installing_any.match(line).group(1)
+ print '>>>',installing
+ echo=False
+ # print lines when echo is true
+ else:
+ if echo: print '>>>',line,
+ f.close()
+ except:
+ print 'Failed to analyze',filename
+
+for arg in sys.argv[1:]:
+ summary(arg)
+EOF
+ echo "******************** END SUMMARY"
+}
+
+### we might build on a box other than the actual web server
+# utilities for handling the pushed material (rpms, logfiles, ...)
+function webpublish_misses_dir () { ssh root@${WEBHOST} "bash -c \"test \! -d $1\"" ; }
+function webpublish () { ssh root@${WEBHOST} "$@" ; }
+function webpublish_cp_local_to_remote () { scp $1 root@${WEBHOST}:$2 ; }
+function webpublish_cp_stdin_to_file () { ssh root@${WEBHOST} cat \> $1; }
+function webpublish_append_stdin_to_file () { ssh root@${WEBHOST} cat \>\> $1; }
+# provide remote dir as first argument, so any number of local files can be passed next
+function webpublish_rsync_dir () { rsync --archive --delete $VERBOSE $2 root@${WEBHOST}:$1 ; }
+function webpublish_rsync_files () {
+ remote="$1"; shift
+ rsync --archive $VERBOSE "$@" root@${WEBHOST}:"$remote" ;
+}
# Notify recipient of failure or success, manage various stamps
function failure() {
set -x
+ # early stage ? - let's not create /build/@PLDISTRO@
+ if test -z "$WEBLOG" ; then
+ WEBHOST=$(hostname)
+ WEBPATH=/tmp
+ WEBBASE=/tmp/vbuild-early-$(date +%Y-%m-%d)
+ WEBLOG=/tmp/vbuild-early-$(date +%Y-%m-%d).log.txt
+ fi
+ webpublish mkdir -p $WEBBASE ||:
+ webpublish_cp_local_to_remote $LOG $WEBLOG ||:
+ summary $LOG | webpublish_append_stdin_to_file $WEBLOG ||:
+ (echo -n "============================== $COMMAND: failure at " ; date ; \
+ webpublish tail --lines=1000 $WEBLOG) | \
+ webpublish_cp_stdin_to_file $WEBBASE.ko ||:
if [ -n "$MAILTO" ] ; then
- tail -c 8k $LOG | mail -s "Failures for build ${BASE}" $MAILTO
+ ( \
+ echo "Subject: KO ${BASE} ${MAIL_SUBJECT}" ; \
+ echo "To: $MAILTO" ; \
+ echo "see build results at $WEBBASE_URL" ; \
+ echo "including full build log at $WEBBASE_URL/log.txt" ; \
+ echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
+ echo "........................................" ; \
+ webpublish tail --lines=1000 $WEBLOG ) | \
+ sendmail $MAILTO
fi
- cp $LOG ${WEBPATH}.log.txt
- (echo -n "============================== $COMMAND: failure at" ; date ; tail -c 20k $LOG) > ${WEBPATH}.bko.txt
exit 1
}
function success () {
set -x
+ # early stage ? - let's not create /build/@PLDISTRO@
+ if test -z "$WEBLOG" ; then
+ WEBHOST=$(hostname)
+ WEBPATH=/tmp
+ WEBLOG=/tmp/vbuild-early-$(date +%Y-%m-%d).log.txt
+ fi
+ webpublish mkdir -p $WEBBASE
+ webpublish_cp_local_to_remote $LOG $WEBLOG
+ summary $LOG | webpublish_append_stdin_to_file $WEBLOG
+ if [ -n "$DO_TEST" ] ; then
+ ( \
+ echo "Successfully built and tested" ; \
+ echo "see build results at $WEBBASE_URL" ; \
+ echo "including full build log at $WEBBASE_URL/log.txt" ; \
+ echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
+ ) | webpublish_cp_stdin_to_file $WEBBASE.pass
+ webpublish rm -f $WEBBASE.pkg-ok $WEBBASE.ko
+ else
+ ( \
+ echo "Successful package-only build, no test requested" ; \
+ echo "see build results at $WEBBASE_URL" ; \
+ echo "including full build log at $WEBBASE_URL/log.txt" ; \
+ ) | webpublish_cp_stdin_to_file $WEBBASE.pkg-ok
+ webpublish rm -f $WEBBASE.ko
+ fi
if [ -n "$MAILTO" ] ; then
- (echo "http://build.one-lab.org/$PLDISTRO/$BASE" ; echo "Completed on $(date)" ) | mail -s "Successfull build for ${BASE}" $MAILTO
+ ( \
+ echo "Subject: PASS ${BASE} ${MAIL_SUBJECT}" ; \
+ echo "To: $MAILTO" ; \
+ echo "$PLDISTRO ($BASE) build for $FCDISTRO completed on $(date)" ; \
+ echo "see build results at $WEBBASE_URL" ; \
+ echo "including full build log at $WEBBASE_URL/log.txt" ; \
+ [ -n "$DO_TEST" ] && echo "and complete test logs at $WEBBASE_URL/testlogs" ) \
+ | sendmail $MAILTO
fi
- cp $LOG ${WEBPATH}.log.txt
- touch ${WEBPATH}.bok.txt
+ # XXX For some reason, we haven't been getting this email for successful builds. If this sleep
+ # doesn't fix the problem, I'll remove it -- Sapan.
+ sleep 5
exit 0
}
echo -n "============================== Starting $COMMAND:build on "
date
- cd /
-
- # if TAGSRELEASE specified : update PLDISTROTAGS with this tag
- if [ -n "$TAGSRELEASE" ] ; then
- cd build
- svn up -r $TAGSRELEASE $PLDISTROTAGS
- cd -
- fi
-
+ cd /build
show_env
echo "Running make IN $(pwd)"
- make stage1=true "${MAKEOPTS[@]}" PLDISTROTAGS=${PLDISTROTAGS} PLDISTRO=${PLDISTRO} "${MAKEVARS[@]}" -C /build
- # in case we use an older build that does not know about versions
- set +e
- make "${MAKEOPTS[@]}" PLDISTROTAGS=${PLDISTROTAGS} PLDISTRO=${PLDISTRO} "${MAKEVARS[@]}" -C /build versions
- set -e
- make "${MAKEOPTS[@]}" PLDISTROTAGS=${PLDISTROTAGS} PLDISTRO=${PLDISTRO} "${MAKEVARS[@]}" -C /build $MAKETARGETS
+
+ # stuff our own variable settings
+ if echo $BUILD_SCM_URL | grep -q git ; then
+ MAKEVARS=("build-GITPATH=${BUILD_SCM_URL}" "${MAKEVARS[@]}")
+ else
+ MAKEVARS=("build-SVNPATH=${BUILD_SCM_URL}" "${MAKEVARS[@]}")
+ fi
+ MAKEVARS=("PLDISTRO=${PLDISTRO}" "${MAKEVARS[@]}")
+ MAKEVARS=("PLDISTROTAGS=${PLDISTROTAGS}" "${MAKEVARS[@]}")
+ MAKEVARS=("PERSONALITY=${PERSONALITY}" "${MAKEVARS[@]}")
+ MAKEVARS=("MAILTO=${MAILTO}" "${MAKEVARS[@]}")
+ MAKEVARS=("WEBPATH=${WEBPATH}" "${MAKEVARS[@]}")
+ MAKEVARS=("TESTBUILDURL=${TESTBUILDURL}" "${MAKEVARS[@]}")
+ MAKEVARS=("WEBROOT=${WEBROOT}" "${MAKEVARS[@]}")
+
+ MAKEVARS=("BASE=${BASE}" "${MAKEVARS[@]}")
+
+ # initialize latex
+ /build/latex-first-run.sh || :
+
+ # stage1
+ make -C /build $DRY_RUN "${MAKEVARS[@]}" stage1=true
+ # versions
+ make -C /build $DRY_RUN "${MAKEVARS[@]}" versions
+ # actual stuff
+ make -C /build $DRY_RUN "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
}
# this was formerly run in the myplc-devel chroot but now is run in the root context,
# this is so that the .ssh config gets done manually, and once and for all
-function runtest () {
+function run_log () {
set -x
set -e
+ trap failure ERR INT
+
+ echo "============================== BEG $COMMAND:run_log on $(date)"
+
+ ### the URL to the RPMS/<arch> location
+ # f12 now has everything in i686; try i386 first as older fedoras have both
+ url=""
+ for a in i386 i686 x86_64; do
+ archdir=/vservers/$BASE/build/RPMS/$a
+ if [ -d $archdir ] ; then
+ # where was that installed
+ url=$(echo $archdir | sed -e "s,/vservers/${BASE}/build,${WEBPATH}/${BASE},")
+ url=$(echo $url | sed -e "s,${WEBROOT},${TESTBUILDURL},")
+ break
+ fi
+ done
- echo -n "============================== Starting $COMMAND:runtest on $(date)"
- here=$(pwd)
-
- ### the URL to the myplc package
- cd /vservers/$BASE/build/RPMS/i386
- rpm=$(ls myplc-[0-9]*.rpm)
- if [ ${#rpm[@]} != 1 ] ; then
- echo "$COMMAND: Cannot locate rpm for testing"
+ if [ -z "$url" ] ; then
+ echo "$COMMAND: Cannot locate arch URL for testing"
+ failure
exit 1
fi
- url=${TESTBUILDURL}${PLDISTRO}/${BASE}/RPMS/i386/${rpm}
- # find the place where the plctest material was checked out
- cd /vservers/$BASE/build/CODEBASES/PLCAPI
- if [ ! -d plctest/ ] ; then
- echo "$COMMAND : Cannot not locate plctest/ - exiting"
- exit 1
- fi
- # compute test directory name on test box
- testdir=plctest-${BASE}
- # rsync/push test material onto the test box
- ssh ${TESTBOXSSH} mkdir -p ${testdir}
- rsync -a -v plctest/ ${TESTBOXSSH}:${testdir}
- # invoke test on testbox
- ssh ${TESTBOXSSH} python -u ${testdir}/${TESTSCRIPT} ${url}
- #invoke make install from build to the testbox
- # looks suspicious : we'd need this *during* myplc run, not at the end
- # in addition we are not in the vserver here so running make can have weird effects
- # make install PLCHOST=${TESTBOX}
-
- if [ "$?" != 0 ] ; then
+ testmaster_ssh="root@${TESTMASTER}"
+
+ # test directory name on test box
+ testdir=${BASE}
+
+ # clean it
+ ssh -n ${testmaster_ssh} rm -rf ${testdir} ${testdir}.git
+
+ # check it out in the build
+ vserver $BASE exec make -C /build tests-module
+
+ # push it onto the testmaster - just the 'system' subdir is enough
+ rsync --verbose --archive /vservers/$BASE/build/MODULES/tests/system/ ${testmaster_ssh}:${BASE}
+ # toss the build in the bargain, so the tests don't need to mess with extracting it
+ rsync --verbose --archive /vservers/$BASE/build/MODULES/build ${testmaster_ssh}:${BASE}/
+
+ # invoke test on testbox - pass url and build url - so the tests can use vtest-init-vserver.sh
+ run_log_env="-p $PERSONALITY -d $PLDISTRO -f $FCDISTRO"
+
+ # need to proceed despite of set -e
+ success=true
+ # passing the build_scm_url should not be needed anymore
+ ssh 2>&1 -n ${testmaster_ssh} ${testdir}/run_log --build ${BUILD_SCM_URL} --url ${url} $run_log_env $RUN_LOG_EXTRAS $VERBOSE --all || success=
+
+ # gather logs in the build vserver
+ mkdir -p /vservers/$BASE/build/testlogs
+ rsync --verbose --archive ${testmaster_ssh}:$BASE/logs/ /vservers/$BASE/build/testlogs
+ # push them to the build web
+ chmod -R a+r /vservers/$BASE/build/testlogs/
+ webpublish_rsync_dir $WEBPATH/$BASE/testlogs/ /vservers/$BASE/build/testlogs/
+
+ echo "============================== END $COMMAND:run_log on $(date)"
+
+ if [ -z "$success" ] ; then
+ echo "Tests have failed - bailing out"
failure
fi
- cd $here
- echo -n "============================== End $COMMAND:runtest on $(date)"
+}
+
+function in_root_context () {
+ rpm -q util-vserver > /dev/null
+}
+
+# this part won't work if WEBHOST does not match the local host
+# would need to be made webpublish_* compliant
+# but do we really need this feature anyway ?
+function sign_node_packages () {
+
+ echo "Signing node packages"
+
+ need_createrepo=""
+
+ repository=$WEBPATH/$BASE/RPMS/
+ # the rpms that need signing
+ new_rpms=
+ # and the corresponding stamps
+ new_stamps=
+
+ for package in $(find $repository/ -name '*.rpm') ; do
+ stamp=$repository/signed-stamps/$(basename $package).signed
+ # If package is newer than signature stamp
+ if [ $package -nt $stamp ] ; then
+ new_rpms="$new_rpms $package"
+ new_stamps="$new_stamps $stamp"
+ fi
+ # Or than createrepo database
+ [ $package -nt $repository/repodata/repomd.xml ] && need_createrepo=true
+ done
+
+ if [ -n "$new_rpms" ] ; then
+ # Create a stamp once the package gets signed
+ mkdir $repository/signed-stamps 2> /dev/null
+
+ # Sign RPMS. setsid detaches rpm from the terminal,
+ # allowing the (hopefully blank) GPG password to be
+ # entered from stdin instead of /dev/tty.
+ echo | setsid rpm \
+ --define "_signature gpg" \
+ --define "_gpg_path $GPGPATH" \
+ --define "_gpg_name $GPGUID" \
+ --resign $new_rpms && touch $new_stamps
+ fi
+
+ # Update repository index / yum metadata.
+ if [ -n "$need_createrepo" ] ; then
+ echo "Indexing node packages after signing"
+ if [ -f $repository/yumgroups.xml ] ; then
+ createrepo --quiet -g yumgroups.xml $repository
+ else
+ createrepo --quiet $repository
+ fi
+ fi
}
function show_env () {
set +x
echo FCDISTRO=$FCDISTRO
echo PLDISTRO=$PLDISTRO
+ echo PERSONALITY=$PERSONALITY
echo BASE=$BASE
- echo SVNPATH=$SVNPATH
+ echo BUILD_SCM_URL=$BUILD_SCM_URL
echo MAKEVARS="${MAKEVARS[@]}"
- echo MAKEOPTS="${MAKEOPTS[@]}"
+ echo DRY_RUN="$DRY_RUN"
echo PLDISTROTAGS="$PLDISTROTAGS"
- echo TAGSRELEASE="$TAGSRELEASE"
- echo WEBPATH="$WEBPATH"
- if [ -d /vservers ] ; then
+ # this does not help, it's not yet set when we run show_env
+ #echo WEBPATH="$WEBPATH"
+ echo TESTBUILDURL="$TESTBUILDURL"
+ echo WEBHOST="$WEBHOST"
+ if in_root_context ; then
echo PLDISTROTAGS="$PLDISTROTAGS"
else
- echo "XXXXXXXXXXXXXXXXXXXX Contents of tags definition file /build/$PLDISTROTAGS"
- cat /build/$PLDISTROTAGS
- echo "XXXXXXXXXXXXXXXXXXXX end tags definition"
+ if [ -f /build/$PLDISTROTAGS ] ; then
+ echo "XXXXXXXXXXXXXXXXXXXX Contents of tags definition file /build/$PLDISTROTAGS"
+ cat /build/$PLDISTROTAGS
+ echo "XXXXXXXXXXXXXXXXXXXX end tags definition"
+ else
+ echo "XXXXXXXXXXXXXXXXXXXX Cannot find tags definition file /build/$PLDISTROTAGS, assuming remote pldistro"
+ fi
fi
set -x
}
+function setupssh () {
+ base=$1; shift
+ sshkey=$1; shift
+
+ if [ -f ${sshkey} ] ; then
+ SSHDIR=/vservers/${base}/root/.ssh
+ mkdir -p ${SSHDIR}
+ cp $sshkey ${SSHDIR}/thekey
+ (echo "host *"; \
+ echo " IdentityFile ~/.ssh/thekey"; \
+ echo " StrictHostKeyChecking no" ) > ${SSHDIR}/config
+ chmod 700 ${SSHDIR}
+ chmod 400 ${SSHDIR}/*
+ else
+ echo "WARNING : could not find provided ssh key $sshkey - ignored"
+ fi
+}
+
function usage () {
- echo "Usage: $COMMAND [option] make-targets"
+ echo "Usage: $COMMAND [option] [var=value...] make-targets"
echo "This is $REVISION"
echo "Supported options"
- echo " -n dry-run : -n passed to make - vserver gets created though - no mail sent"
- echo " -f FCDISTRO - defaults to $DEFAULT_FCDISTRO"
- echo " -d PLDISTRO - defaults to $DEFAULT_PLDISTRO"
- echo " -b BASE - defaults to $DEFAULT_BASE"
+ echo " -f fcdistro - defaults to $DEFAULT_FCDISTRO"
+ echo " -d pldistro - defaults to $DEFAULT_PLDISTRO"
+ echo " -p personality - defaults to $DEFAULT_PERSONALITY"
+ echo " -m mailto - no default"
+ echo " -s build_scm_url - git or svn URL where to fetch the build module - defaults to $DEFAULT_BUILD_SCM_URL"
+ echo " define GIT tag or branch name appending @tagname to url"
+ echo " -t pldistrotags - defaults to \${PLDISTRO}-tags.mk"
+ echo " -b base - defaults to $DEFAULT_BASE"
echo " @NAME@ replaced as appropriate"
- echo " -t PLDISTROTAGS - defaults to \${PLDISTRO}-tags.mk"
- echo " -r TAGSRELEASE - a release number that refers to PLDISTROTAGS - defaults to HEAD"
- echo " -s SVNPATH - where to fetch the build module"
- echo " -o : overwrite - re-run in base directory, do not create vserver"
- echo " -m MAILTO"
- echo " -a MAKEVAR=value - space in values are not supported"
- echo " -w WEBPATH - defaults to $DEFAULT_WEBPATH"
- echo " -B : run build only"
- echo " -T : run test only"
- echo " -v : be verbose"
+ echo " -o base: (overwrite) do not re-create vserver, re-use base instead"
+ echo " the -f/-d/-p/-m/-s/-t options are uneffective in this case"
+ echo " -c testconfig - defaults to $DEFAULT_TESTCONFIG"
+ echo " -y {pl,pg} - passed to run_log"
+ echo " -e step - passed to run_log"
+ echo " -X : passes --lxc to run_log"
+ echo " -S : passes --vs to run_log"
+ echo " -x <run_log_args> - a hook to pass other arguments to run_log"
+ echo " -w webpath - defaults to $DEFAULT_WEBPATH"
+ echo " -W testbuildurl - defaults to $DEFAULT_TESTBUILDURL; this is also used to get the hostname where to publish builds"
+ echo " -r webroot - defaults to $DEFAULT_WEBROOT - the fs point where testbuildurl actually sits"
+ echo " -M testmaster - defaults to $DEFAULT_TESTMASTER"
+ echo " -Y - sign yum repo in webpath"
+ echo " -g gpg_path - to the gpg secring used to sign rpms. Defaults to $DEFAULT_GPGPATH"
+ echo " -u gpg_uid - email used in secring. Defaults to $DEFAULT_GPGUID"
+ echo " -K svnsshkey - specify key to use when svn+ssh:// URLs are used for SVNPATH"
+ echo " -S - do not publish source rpms"
+ echo " -B - run build only"
+ echo " -T - run test only"
+ echo " -n - dry-run: -n passed to make - vserver gets created though - no mail sent"
+ echo " -v - be verbose"
+ echo " -7 - uses weekday-@FCDISTRO@ as base"
+ echo " -i ifname - defaults to $DEFAULT_IFNAME - used to determine local IP"
+ echo " --build-branch branch - build using the branch from build module"
exit 1
}
set -e
- # preserve arguments for passing them again later
- declare -a argv
- for arg in "$@"; do argv=(${argv[@]} "$arg") ; done
-
# parse arguments
MAKEVARS=()
- MAKEOPTS=()
+ MAKETARGETS=()
+ DRY_RUN=
DO_BUILD=true
DO_TEST=true
- while getopts "nf:d:b:t:r:s:om:a:w:BTvh" opt ; do
- case $opt in
- n) DRY_RUN="true" ; MAKEOPTS=(${MAKEOPTS[@]} -n) ;;
- f) FCDISTRO=$OPTARG ;;
- d) PLDISTRO=$OPTARG ;;
- b) BASE=$OPTARG ;;
- t) PLDISTROTAGS=$OPTARG ;;
- r) TAGSRELEASE=$OPTARG ;;
- s) SVNPATH=$OPTARG ;;
- o) USEOLD=true ;;
- m) MAILTO=$OPTARG ;;
- a) MAKEVARS=(${MAKEVARS[@]} "$OPTARG") ;;
- w) WEBPATH=$OPTARG ;;
- B) DO_TEST= ;;
- T) DO_BUILD= ; USEOLD=true ;;
- v) set -x ;;
- h|*) usage ;;
+ PUBLISH_SRPMS=true
+ SSH_KEY=""
+ SIGNYUMREPO=""
+
+ OPTS_ORIG=$@
+ OPTS=$(getopt -o "f:d:p:m:s:t:b:o:c:y:e:XSx:w:W:r:M:Yg:u:K:SBTnv7i:P:h" -l "build-branch:" -- $@)
+ if [ $? != 0 ]
+ then
+ usage
+ fi
+ eval set -- "$OPTS"
+ while true; do
+ case $1 in
+ -f) FCDISTRO=$2; shift 2 ;;
+ -d) PLDISTRO=$2; shift 2 ;;
+ -p) PERSONALITY=$2; shift 2 ;;
+ -m) MAILTO=$2; shift 2 ;;
+ -s) BUILD_SCM_URL=$2; shift 2 ;;
+ -t) PLDISTROTAGS=$2; shift 2 ;;
+ -b) BASE=$2; shift 2 ;;
+ -o) OVERBASE=$2; shift 2 ;;
+ -c) TESTCONFIG="$TESTCONFIG $2"; shift 2 ;;
+ ########## passing stuff to run_log
+ # -y foo -> run_log -y foo
+ -y) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --rspec-style $2"; shift 2 ;;
+ # -e foo -> run_log -e foo
+ -e) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --exclude $2"; shift 2 ;;
+ # -X -> run_log --lxc
+ -X) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --lxc"; shift;;
+ # -S -> run_log --vs
+ -S) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --vs"; shift;;
+ # more general form to pass args to run_log
+ # -x foo -> run_log foo
+ -x) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS $2"; shift 2;;
+ ##########
+ -w) WEBPATH=$2; shift 2 ;;
+ -W) TESTBUILDURL=$2; shift 2 ;;
+ -r) WEBROOT=$2; shift 2 ;;
+ -M) TESTMASTER=$2; shift 2 ;;
+ -Y) SIGNYUMREPO=true; shift ;;
+ -g) GPGPATH=$2; shift 2 ;;
+ -u) GPGUID=$2; shift 2 ;;
+ -K) SSH_KEY=$2; shift 2 ;;
+ -S) PUBLISH_SRPMS="" ; shift ;;
+ -B) DO_TEST= ; shift ;;
+ -T) DO_BUILD= ; shift;;
+ -n) DRY_RUN="-n" ; shift ;;
+ -v) set -x ; VERBOSE="-v" ; shift ;;
+ -7) BASE="$(date +%a|tr A-Z a-z)-@FCDISTRO@" ; shift ;;
+ -i) IFNAME=$2; shift 2 ;;
+ -P) PREINSTALLED="-P $2"; shift 2;;
+ -h) usage ; shift ;;
+ --) shift; break ;;
esac
done
-
- shift $(($OPTIND - 1))
- MAKETARGETS="$@"
+
+ # preserve options for passing them again later, together with expanded base
+ options=$OPTS_ORIG
+
+ # allow var=value stuff;
+ for target in "$@" ; do
+ # check if contains '='
+ target1=$(echo $target | sed -e s,=,,)
+ if [ "$target" = "$target1" ] ; then
+ MAKETARGETS=(${MAKETARGETS[@]} "$target")
+ else
+ MAKEVARS=(${MAKEVARS[@]} "$target")
+ fi
+ done
# set defaults
[ -z "$FCDISTRO" ] && FCDISTRO=$DEFAULT_FCDISTRO
[ -z "$PLDISTRO" ] && PLDISTRO=$DEFAULT_PLDISTRO
+ [ -z "$PERSONALITY" ] && PERSONALITY=$DEFAULT_PERSONALITY
[ -z "$PLDISTROTAGS" ] && PLDISTROTAGS="${PLDISTRO}-tags.mk"
[ -z "$BASE" ] && BASE="$DEFAULT_BASE"
[ -z "$WEBPATH" ] && WEBPATH="$DEFAULT_WEBPATH"
- [ -z "$SVNPATH" ] && SVNPATH="$DEFAULT_SVNPATH"
- #
- if [ "$PLDISTRO" = "onelab" ] ; then
- [ -z "$MAILTO" ] && MAILTO="$DEFAULT_MAILTO_onelab"
- else
- [ -z "$MAILTO" ] && MAILTO="$DEFAULT_MAILTO_planetlab"
- fi
+ [ -z "$TESTBUILDURL" ] && TESTBUILDURL="$DEFAULT_TESTBUILDURL"
+ [ -z "$WEBROOT" ] && WEBROOT="$DEFAULT_WEBROOT"
+ [ -z "$GPGPATH" ] && GPGPATH="$DEFAULT_GPGPATH"
+ [ -z "$GPGUID" ] && GPGUID="$DEFAULT_GPGUID"
+ [ -z "$IFNAME" ] && IFNAME="$DEFAULT_IFNAME"
+ [ -z "$BUILD_SCM_URL" ] && BUILD_SCM_URL="$DEFAULT_BUILD_SCM_URL"
+ [ -z "$TESTCONFIG" ] && TESTCONFIG="$DEFAULT_TESTCONFIG"
+ [ -z "$TESTMASTER" ] && TESTMASTER="$DEFAULT_TESTMASTER"
+
[ -n "$DRY_RUN" ] && MAILTO=""
+
+ # elaborate the extra args to be passed to run_log
+ for config in ${TESTCONFIG} ; do
+ RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --config $config"
+ done
+
- ### set BASE from DISTRO, if unspecified
- sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g"
- BASE=$(echo ${BASE} | sed $sedargs)
- WEBPATH=$(echo ${WEBPATH} | sed $sedargs -e s,@BASE@,"$BASE",g)
+ if [ -n "$OVERBASE" ] ; then
+ sedargs="-e s,@DATE@,${DATE},g"
+ BASE=$(echo ${OVERBASE} | sed $sedargs)
+ else
+ sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
+ BASE=$(echo ${BASE} | sed $sedargs)
+ fi
- if [ ! -d /vservers ] ; then
+ ### elaborate mail subject
+ if [ -n "$DO_BUILD" -a -n "$DO_TEST" ] ; then
+ MAIL_SUBJECT="full"
+ elif [ -n "$DO_BUILD" ] ; then
+ MAIL_SUBJECT="pkg-only"
+ elif [ -n "$DO_TEST" ] ; then
+ MAIL_SUBJECT="test-only"
+ fi
+ if [ -n "$OVERBASE" ] ; then
+ MAIL_SUBJECT="${MAIL_SUBJECT} rerun"
+ else
+ MAIL_SUBJECT="${MAIL_SUBJECT} fresh"
+ fi
+ short_hostname=$(hostname | cut -d. -f1)
+ MAIL_SUBJECT="on ${short_hostname} - ${MAIL_SUBJECT}"
+
+ ### compute WEBHOST from TESTBUILDURL
+ # this is to avoid having to change the builds configs everywhere
+ # simplistic way to extract hostname from a URL
+ WEBHOST=$(echo "$TESTBUILDURL" | cut -d/ -f 3)
+
+ if ! in_root_context ; then
# in the vserver
echo "==================== Within vserver BEG $(date)"
build
# (*) copy this command in the vserver
# (*) invoke it
- if [ -n "$USEOLD" ] ; then
+ if [ -n "$OVERBASE" ] ; then
### Re-use a vserver (finish an unfinished build..)
if [ ! -d /vservers/${BASE} ] ; then
echo $COMMAND : cannot find vserver $BASE
exec > $LOG 2>&1
set -x
echo "XXXXXXXXXX $COMMAND: using existing vserver $BASE" $(date)
- show_env
+ # start in case e.g. we just rebooted
+ vserver ${BASE} start || :
+ # retrieve environment from the previous run
+ FCDISTRO=$(vserver ${BASE} exec /build/getdistroname.sh)
+ BUILD_SCM_URL=$(vserver ${BASE} exec make --no-print-directory -C /build stage1=skip +build-SVNPATH +build-GITPATH)
+ # for efficiency, crop everything in one make run
+ tmp=/tmp/${BASE}-env.sh
+ vserver ${BASE} exec make --no-print-directory -C /build stage1=skip \
+ ++PLDISTRO ++PLDISTROTAGS ++PERSONALITY ++MAILTO ++WEBPATH ++TESTBUILDURL ++WEBROOT > $tmp
+ . $tmp
+ rm -f $tmp
# update build
- vserver ${BASE} exec svn update /build
+ [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
+ if echo $BUILD_SCM_URL | grep -q git ; then
+ vserver $BASE exec bash -c "cd /build; git pull; make tests-clean"
+ else
+ vserver $BASE exec svn update /build
+ fi
+ # make sure we refresh the tests place in case it has changed
+ rm -f /build/MODULES/tests
+ options=(${options[@]} -d $PLDISTRO -t $PLDISTROTAGS -s $BUILD_SCM_URL)
+ [ -n "$PERSONALITY" ] && options=(${options[@]} -p $PERSONALITY)
+ [ -n "$MAILTO" ] && options=(${options[@]} -m $MAILTO)
+ [ -n "$WEBPATH" ] && options=(${options[@]} -w $WEBPATH)
+ [ -n "$TESTBUILDURL" ] && options=(${options[@]} -W $TESTBUILDURL)
+ [ -n "$WEBROOT" ] && options=(${options[@]} -r $WEBROOT)
+ show_env
else
# create vserver: check it does not exist yet
i=
done
BASE=${BASE}${i}
# need update
- WEBPATH=$(echo ${WEBPATH} | sed $sedargs -e s,@BASE@,"$BASE",g)
# manage LOG - beware it might be a symlink so nuke it first
LOG=/vservers/${BASE}.log.txt
rm -f $LOG
echo "XXXXXXXXXX $COMMAND: creating vserver $BASE" $(date)
show_env
- ### extract vbuild-init-vserver.sh and run it
- svn cat $SVNPATH/vbuild-init-vserver.sh > /tmp/vbuild-init-vserver-$$.sh
- # get .lst
- lst=${PLDISTRO}-${FCDISTRO}-devel.lst
- svn cat $SVNPATH/$lst > /tmp/$lst
-
+ ### extract the whole build - much simpler
+ tmpdir=/tmp/$COMMAND-$$
+ if echo $BUILD_SCM_URL | grep -q git ; then
+ GIT_REPO=$(echo $BUILD_SCM_URL | cut -d@ -f1)
+ GIT_TAG=$(echo $BUILD_SCM_URL | cut -s -d@ -f2)
+ GIT_TAG=${GIT_TAG:-master}
+ mkdir -p $tmpdir; git archive --remote=$GIT_REPO $GIT_TAG | tar -C $tmpdir -xf -
+ else
+ svn export $BUILD_SCM_URL $tmpdir
+ fi
# Create vserver
- cd /tmp
- chmod +x vbuild-init-vserver-$$.sh
- /tmp/vbuild-init-vserver-$$.sh ${BASE} ${FCDISTRO} ${PLDISTRO}
+ cd $tmpdir
+ ./vbuild-init-vserver.sh $VERBOSE -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} -i ${IFNAME} ${PREINSTALLED} ${BASE}
# cleanup
- rm -f /tmp/vbuild-init-vserver-$$.sh /tmp/$lst
cd -
- # Extract build
- vserver ${BASE} exec svn checkout ${SVNPATH} /build
+ rm -rf $tmpdir
+ # Extract build again - in the vserver
+ [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
+ if echo $BUILD_SCM_URL | grep -q git ; then
+ vserver $BASE exec bash -c "git clone $GIT_REPO /build; cd /build; git checkout $GIT_TAG"
+ else
+ vserver $BASE exec svn checkout ${BUILD_SCM_URL} /build
+ fi
fi
+ # install ssh key in vserver
echo "XXXXXXXXXX $COMMAND: preparation of vserver $BASE done" $(date)
# The log inside the vserver contains everything
LOG2=/vservers/${BASE}/log.txt
- (echo "==================== Transcript of vserver creation -- BEG $(date)" ; \
+ (echo "==================== BEG VSERVER Transcript of vserver creation" ; \
cat $LOG ; \
- echo "==================== Transcript of vserver creation -- END $(date)" ; \
+ echo "==================== END VSERVER Transcript of vserver creation" ; \
echo "xxxxxxxxxx Messing with logs, symlinking $LOG2 to $LOG" ) >> $LOG2
### not too nice : nuke the former log, symlink it to the new one
rm $LOG; ln -s $LOG2 $LOG
# redirect log again
exec >> $LOG 2>&1
+ sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
+ WEBPATH=$(echo ${WEBPATH} | sed $sedargs)
+ webpublish mkdir -p ${WEBPATH}
+
+ # where to store the log for web access
+ WEBBASE=${WEBPATH}/${BASE}
+ WEBLOG=${WEBPATH}/${BASE}/log.txt
+ # compute the log URL - inserted in the mail messages for convenience
+ WEBBASE_URL=$(echo $WEBBASE | sed -e "s,//,/,g" -e "s,${WEBROOT},${TESTBUILDURL},")
+
if [ -n "$DO_BUILD" ] ; then
+ # invoke this command into the build directory of the vserver
cp $COMMANDPATH /vservers/${BASE}/build/
# invoke this command in the vserver for building (-T)
- vserver ${BASE} exec /build/$COMMAND "${argv[@]}" -b "${BASE}"
+ vserver ${BASE} exec chmod +x /build/$COMMAND
+ vserver ${BASE} exec /build/$COMMAND "${options[@]}" -b "${BASE}" "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
fi
- # publish to the web so runtest can find them
- rm -rf $WEBPATH ; mkdir -p $WEBPATH
- tar -C /vservers/$BASE/build -cf - RPMS SRPMS | tar -C $WEBPATH -xf -
-
+ # publish to the web so run_log can find them
set +e
+ webpublish rm -rf $WEBPATH/$BASE
+ # guess if we've been doing any debian-related build
+ if [ ! -f /vservers/$BASE/etc/debian_version ] ; then
+ webpublish mkdir -p $WEBPATH/$BASE/{RPMS,SRPMS}
+ webpublish_rsync_dir $WEBPATH/$BASE/RPMS/ /vservers/$BASE/build/RPMS/
+ [[ -n "$PUBLISH_SRPMS" ]] && webpublish_rsync_dir $WEBPATH/$BASE/SRPMS/ /vservers/$BASE/build/SRPMS/
+ else
+ # run scanpackages so we can use apt-get on this
+ # (not needed on fedora b/c this is done by the regular build already)
+ vserver $BASE exec bash -c "(cd /build ; dpkg-scanpackages DEBIAN/ | gzip -9c > DEBIAN/Packages.gz)"
+ webpublish mkdir -p $WEBPATH/$BASE/DEBIAN
+ webpublish_rsync_files $WEBPATH/$BASE/DEBIAN/ /vservers/$BASE/build/DEBIAN/*.deb
+ webpublish_rsync_files $WEBPATH/$BASE/ /vservers/$BASE/build/DEBIAN/*.gz
+ fi
+ # publish myplc-release if this exists
+ release=/vservers/$BASE/build/myplc-release
+ [ -f $release ] && webpublish_rsync_files $WEBPATH/$BASE $release
+ set -e
+
+ # create yum repo and sign packages.
+ if [ -n "$SIGNYUMREPO" ] ; then
+ # this script does not yet support signing on a remote (webhost) repo
+ sign_here=$(hostname) ; sign_web=$(webpublish hostname)
+ if [ "$hostname" = "$sign_here" ] ; then
+ sign_node_packages
+ else
+ echo "$COMMAND does not support signing on a remote yum repo"
+ echo "you might want to turn off the -y option, or run this on the web server box itself"
+ exit 1
+ fi
+ fi
+
if [ -n "$DO_TEST" ] ; then
- runtest
+ run_log
fi
success
-
+
+ echo "==================== MAIN END $(date)"
fi
}