#
-# PlanetLab RPM generation
-#
-# Mark Huang <mlhuang@cs.princeton.edu>
-# Copyright (C) 2003-2005 The Trustees of Princeton University
+# Thierry Parmentelat - INRIA Sophia Antipolis
+#
+####################
+# invocation:
+#
+# (*) make stage1=true
+# this extracts all specfiles and computes .mk from specfiles
+# you need to specify PLDISTRO here if relevant - see below
+# (*) make help
+# for more info on how to invoke this stuff
+#
+#################### (fedora) distributions
+#
+# (*) as of nov. 2007, myplc-devel is deprecated
+# (*) instead, we create a fresh vserver that holds required tools (see e.g. planetlab-devel.lst)
+# (*) the build uses the current fedora version as a target for the produced images
+# (*) so you simply need to create a fedora 8 build image for building fedora-8 images
+#
+#################### (planetlab) distributions
+#
+# (*) see README-pldistros.txt
+# (*) then you need to run
+# make stage1=true PLDISTRO=onelab
+#
+####################
+# This build deals with 3 kinds of objects
+#
+# (*) packages are named upon the RPM name; they are mostly lowercase
+# Add a package to ALL if you want it built as part of the default set.
+# (*) modules are named after the subversion or git tree; we would wish to keep
+# these names lowercase as far as possible
+# (*) rpms are named in the spec files. A package typically defines several rpms;
+# rpms are used for defining LOCAL-DEVEL-RPMS. See also package.rpmnames
+#
+# in simple cases, one package uses one module (in which case using the same name sounds right)
+# but others might need several modules (e.g. image-creation packages like bootstrapfs need
+# bootstrapfs and build); in this case the FIRST ONE is used for locating the specfile
+#
+#################### packages
+# basics: how to build a package - you need to define the following variables
+#
+# (*) package-MODULES
+# a package needs one or several modules to build; the first one is used for
+# some special purposes, like locating the specfile
+# (*) package-SPEC
+# the package's specfile; this is relative to the FIRST module in package-MODULES
+#
+# Optional:
+#
+# (*) package-DEPEND-PACKAGES
+# a set of (obviously local) *packages* that this package depends on, e.g.
+# bootstrapfs-DEPEND-PACKAGES += kernel
+# this impacts the order of the build
+# (*) package-STOCK-DEVEL-RPMS
+# a set of stock rpms that this package needs at build-time
+# this can also be set in config.<distro>/devel.pkgs or config.planetlab/devel.pkgs as appropriate
+# (*) package-LOCAL-DEVEL-RPMS
+# a set of *local* rpms that the build will rpm-install before building <package>
+# the build will attempt to uninstall those once the package is built, this is not fatal though
+# this is intended to denote local rpms, i.e. ones that are results of our own build
+# stock rpms should be mentioned in STOCK-DEVEL-RPMS or in devel.pkgs as described above
+# (*) package-LOCAL-DEVEL-RPMS-CRUCIAL
+# like package-LOCAL-DEVEL-RPMS but for crucial packages (like autoconf) that only need an update from our build
+# rpms in this area will *not* be uninstalled after the target is made, because that would ruin the build vm for good
+# (*) package-DEPEND-FILES
+# a set of files that the package depends on - and that make needs to know about
+# if this contains RPMS/yumgroups.xml, then the toplevel RPMS's index
+# is refreshed with createrepo prior to running rpmbuild
+# (*) package-SPECVARS
+# space-separated list of spec variable definitions, where you can reference make variables that
+# belong to packages defined BEFORE the current one
+# note: you should use = to define these (as opposed to :=)
+# e.g. mydriver-SPECVARS = foo=$(kernel-rpm-release)
+# would let you use the %release from the kernel's package when rpmbuild'ing mydriver
+# see automatic below
+# (*) package-RPMFLAGS: Miscellaneous RPM flags
+# this is passed to rpmbuild, as well as to spec2make for "exporting" various rpm variable
+# to make; beware that some features, like --with=debug or --define 'foo bar' are not
+# well handled by spec2make as of this writing, which can cause issues.
+# hopefully this will be fixed...
+# (*) package-BUILD-FROM-SRPM: set this to any non-empty value,
+# if your package is able to produce a source rpm.
+# In this case the build will first invoke 'make srpm', and then rebuild binaries from that
+# (*) package-RPMDATE: set this to any non-empty value to get the rpm package's release field hold the current date
+# this is useful for container packages, like e.g. bootstrapfs or vserver, that contains much more than the
+# correspondng module
+#
+#################### modules
+# Required information about the various modules (set this in e.g. planetlab-tags.mk)
+#
+# (*) module-SVNPATH
+# for svn modules
+# the complete path where this module lies;
+# you can specify the trunk or a given tag with this variable
+#
+# (*) module-GITPATH
+# for git modules
+# which by analogy with svn revision scheme, is expected to be <url>@<tag>
+#
+#################### automatic variables
+#
+# the build defines some make variables that are extracted from spec files
+# to inspect those, see for example
+# (*) $ make ulogd-pkginfo
+# to see the list f variables attached to a given package
+# (*) $ make kernel-devel-rpminfo
+# to see the list of variables attached to a given rpm
+#
+####################
+
+# exported to spec files as plrelease
+PLANETLAB_RELEASE = 5.2
+
#
-# $Id: Makefile,v 1.82 2005/12/08 19:56:44 mef Exp $
+# Default values
#
+# minimal compat with macos, just so this does not complain
+HOSTARCH := $(shell arch)
+DISTRO := $(shell ./getdistro.sh)
+RELEASE := $(shell ./getrelease.sh)
+DISTRONAME := $(shell ./getdistroname.sh)
+#################### Makefile
# Default target
all:
+.PHONY:all
-#
-# CVSROOT: CVSROOT to use
-# INITIAL: CVS tag to use for Source0 tarball
-# TAG: CVS tag to patch to (if not HEAD)
-# MODULE: CVS module name to use (if not HEAD)
-# SPEC: RPM spec file template
-# RPMBUILD: If not rpmbuild
-# RPMFLAGS: Miscellaneous RPM flags
-# CVS_RSH: If not ssh
-# ALL: default targets
-#
-# If INITIAL is different than TAG, PatchSets will be generated
-# automatically with cvsps(1) to bring Source0 up to TAG. If TAG is
-# HEAD, a %{date} variable will be defined in the generated spec
-# file. If a Patch: tag in the spec file matches a generated PatchSet
-# number, the name of the patch will be as specified. Otherwise, the
-# name of the patch will be the PatchSet number. %patch tags in the
-# spec file are generated automatically.
-#
-
-# Default values
-INITIAL := HEAD
-TAG := HEAD
-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-
-# By default, the naming convention for built RPMS is
-# <name>-<version>-<release>.planetlab.<arch>.rpm
-# Set PLDISTRO on the command line to differentiate between downstream
-# variants.
+### default values
PLDISTRO := planetlab
+RPMBUILD := rpmbuild
-#
-# kernel
-#
-
-kernel-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-kernel-MODULE := linux-2.6
-kernel-SPEC := linux-2.6/scripts/kernel-2.6-planetlab.spec
-ALL += kernel
-
-#
-# vnet
-#
-
-vnet-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-vnet-MODULE := vnet
-vnet-SPEC := vnet/vnet.spec
-ALL += vnet
-
-# Build kernel first so we can bootstrap off of its build
-vnet: kernel
-
-#
-# util-vserver
-#
-
-util-vserver-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-util-vserver-MODULE := util-vserver
-util-vserver-SPEC := util-vserver/util-vserver.spec
-ALL += util-vserver
-
-#
-# lkcdutils
-#
-
-lkcdutils-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-lkcdutils-MODULE := lkcdutils
-lkcdutils-SPEC := lkcdutils/spec/lkcdutils.spec
-ALL += lkcdutils
-
-# Build kernel first so we can bootstrap off of its build
-lkcdutils: kernel
-
-#
-# yum
-#
-
-yum-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-yum-MODULE := yum
-yum-SPEC := yum/yum.spec
-ALL += yum
-
-#
-# ksymoops
-#
-
-ksymoops-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-ksymoops-INITIAL := ksymoops-2_4_9
-ksymoops-MODULE := ksymoops
-ksymoops-SPEC := ksymoops/ksymoops.spec
-ALL += ksymoops
-
-#
-# PlanetLabAccounts
-#
-
-PlanetLabAccounts-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-PlanetLabAccounts-MODULE := PlanetLabAccounts
-PlanetLabAccounts-SPEC := PlanetLabAccounts/PlanetLabAccounts.spec
-ALL += PlanetLabAccounts
-
-#
-# NodeUpdate
-#
-
-NodeUpdate-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-NodeUpdate-MODULE := NodeUpdate
-NodeUpdate-SPEC := NodeUpdate/NodeUpdate.spec
-ALL += NodeUpdate
-
-#
-# PlanetLabConf
-#
-
-PlanetLabConf-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-PlanetLabConf-MODULE := PlanetLabConf
-PlanetLabConf-SPEC := PlanetLabConf/PlanetLabConf.spec
-ALL += PlanetLabConf
-
-#
-# PlanetLabKeys
-#
-
-PlanetLabKeys-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-PlanetLabKeys-MODULE := PlanetLabKeys
-PlanetLabKeys-SPEC := PlanetLabKeys/PlanetLabKeys.spec
-ALL += PlanetLabKeys
-
-#
-# ipod
-#
-
-ipod-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-ipod-MODULE := ipod
-ipod-SPEC := ipod/ipod.spec
-ALL += ipod
-
-#
-# sudo
-#
-
-sudo-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-sudo-MODULE := sudo
-sudo-SPEC := sudo/planetlab_sudo.spec
-ALL += sudo
-
-#
-# pycurl
-#
-
-pycurl-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-pycurl-MODULE := pycurl
-pycurl-SPEC := pycurl/pycurl.spec
-ALL += pycurl
-
-#
-# BootServerRequest
-#
-
-BootServerRequest-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-BootServerRequest-MODULE := BootServerRequest
-BootServerRequest-SPEC := BootServerRequest/PLBootServerRequest.spec
-ALL += BootServerRequest
-
-#
-# PlanetLabID
-#
-
-PlanetLabID-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-PlanetLabID-MODULE := PlanetLabID
-PlanetLabID-SPEC := PlanetLabID/PlanetLabID.spec
-ALL += PlanetLabID
-
-#
-# Node Manager
-#
-
-sidewinder-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-sidewinder-MODULE := sidewinder
-sidewinder-SPEC := sidewinder/sidewinder.spec
-ALL += sidewinder
-
-#
-# pl_sshd
-#
-
-pl_sshd-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-pl_sshd-MODULE := pl_sshd
-pl_sshd-SPEC := pl_sshd/pl_sshd.spec
-ALL += pl_sshd
-
-#
-# Resource Management Tools
-#
-
-resman-CVSROOT := :pserver:anon@build.planet-lab.org:/cvs
-resman-MODULE := resman
-resman-SPEC := resman/resman.spec
-ALL += resman
-
-#
-# libhttpd++:
-#
-
-libhttpd++-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-libhttpd++-MODULE := libhttpd++
-libhttpd++-SPEC := libhttpd++/libhttpd++.spec
-ALL += libhttpd++
-
-#
-# Proper: Privileged Operations Service
-#
-
-proper-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-proper-MODULE := proper
-proper-SPEC := proper/proper.spec
-ALL += proper
-
-proper: libhttpd++
-
-#
-# ulogd
-#
-
-ulogd-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-ulogd-MODULE := ulogd
-ulogd-SPEC := ulogd/ulogd.spec
-ALL += ulogd
-
-ulogd: kernel proper
-
-#
-# netflow
-#
-
-netflow-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-netflow-MODULE := netflow
-netflow-SPEC := netflow/netflow.spec
-ALL += netflow
-
-#
-# PlanetLab Mom: Cleans up your mess
-#
-
-pl_mom-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-pl_mom-MODULE := pl_mom
-pl_mom-SPEC := pl_mom/pl_mom.spec
-ALL += pl_mom
-
-#
-# iptables
-#
-
-iptables-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-iptables-MODULE := iptables
-iptables-SPEC := iptables/iptables.spec
-ALL += iptables
-
-iptables: kernel
-
-#
-# kexec-tools
-#
-
-kexec-tools-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-kexec-tools-MODULE := kexec-tools
-kexec-tools-SPEC := kexec-tools/kexec-tools.spec
-ALL += kexec-tools
-
-#
-# dhcp
-#
-
-dhcp-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-dhcp-MODULE := dhcp
-dhcp-SPEC := dhcp/dhcp.spec
-ALL += dhcp
-
-#
-# util-python
-#
-
-util-python-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-util-python-MODULE := util-python
-util-python-SPEC := util-python/util-python.spec
-ALL += util-python
-
-# proper and util-vserver both use scripts in util-python for building
-proper: util-python
-util-vserver: util-python
+########## envfrompreviousrun.mk holds PLDISTRO and others - it is generated at stage1 (see below)
+ifeq "$(stage1)" ""
+include envfrompreviousrun.mk
+endif
-#
-# vserver-reference
-#
+# when re-running the nightly build after failure, we need to gather the former values
+# do this by running make stage1=skip +PLDISTRO
+ifeq "$(stage1)" "skip"
+include envfrompreviousrun.mk
+endif
-vserver-reference-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-vserver-reference-MODULE := vserver-reference
-vserver-reference-SPEC := vserver-reference/vserver-reference.spec
-# Package must be built as root
-vserver-reference-RPMBUILD := sudo rpmbuild
-ALL += vserver-reference
+#################### include onelab.mk
+# describes the set of components
+PLDISTROCONTENTS := $(PLDISTRO).mk
+include $(PLDISTROCONTENTS)
-# vserver-reference may require current packages
-vserver-reference: $(filter-out vserver-reference,$(ALL))
+#################### include <pldistro>-tags.mk
+# describes where to fetch components
+ifeq "$(PLDISTROTAGS)" ""
+PLDISTROTAGS := $(PLDISTRO)-tags.mk
+endif
+include $(PLDISTROTAGS)
+
+# this used to be set in the -tags.mk files, but that turned out to require
+# error-prone duplicate changes
+# so now the nightly build script sets this to what it is currently using
+# in case we run this manually, i.e. if build-GITPATH is not set
+ifeq "$(build-GITPATH)" ""
+build-GITPATH := $(shell git config remote.origin.url)
+endif
-# ...and the yum manifest
-vserver-reference: RPMS/yumgroups.xml
+#################### pldistros that are defined remotely
+# fetching with svn
+define remote_pldistro_fetch_svn
+$(1).config.SVNPATH := $(shell grep -v "^#" config.$(1).svnpath)
+config.$(1): config.$(1).svnpath
+ @echo "Fetching (svn) details for remote pldistro $(1)"
+ svn export $$($(1).config.SVNPATH) config.$(1)
+endef
+
+# fetching with git
+define remote_pldistro_fetch_git
+$(1).config.GITPATH := $(shell grep -v "^#" config.$(1).gitpath)
+$(1).config.gitrepo := $$(firstword $$(subst @, ,$$($(1).config.GITPATH)))
+$(1).config.gittag := $$(word 2,$$(subst @, ,$$($(1).config.GITPATH)))
+$(1).config.gittag := $$(if $$($(1).config.gittag),$$($(1).config.gittag),master)
+config.$(1): GITPATH=$(shell grep -v "^#" config.$(1).gitpath)
+config.$(1): config.$(1).gitpath
+ @echo "Fetching (git) details for remote pldistro $(1)"
+ mkdir -p config.$(1)
+ git $(GITTAG) archive --remote=$$($(1).config.gitrepo) $$($(1).config.gittag) | tar -C config.$(1) -xf -
+endef
+
+
+# put it together
+define remote_pldistro
+$(1).mk: config.$(1)/$(1).mk
+ @echo 'creating $(1) from config.$(1)'
+ cp config.$(1)/$(1).mk $(1).mk
+
+$(2).mk: config.$(1)/$(2).mk
+ @echo 'creating $(2) tags from config.$(1)'
+ cp config.$(1)/$(2).mk $(2).mk
+
+config.$(1)/$(1).mk: config.$(1)
+config.$(1)/$(2).mk: config.$(1)
+
+DISTCLEANS += $(1).mk $(2).mk config.$(1)
+$(eval $(call remote_pldistro_fetch_$(3),$(1)))
+endef
+
+########## stage1 and stage1iter
+# extract specs and compute .mk files by running
+# make stage1=true
+# entering stage1, we compute all the spec files
+# then we use stage1iter to compute the .mk iteratively,
+# ensuring that the n-1 first makefiles are loaded when creating the n-th one
+# when stage1iter is set, it is supposed to be an index (starting at 1) in $(ALL)
+
+ALLMKS := $(foreach package, $(ALL), MAKE/$(package).mk)
+
+### stage1iter : need some arithmetic, see
+# http://www.cmcrossroads.com/articles/ask-mr.-make/learning-gnu-make-functions-with-arithmetic.html
+ifneq "$(stage1iter)" ""
+# the first n packages
+packages := $(wordlist 1,$(words $(stage1iter)),$(ALL))
+# the n-th package
+package := $(word $(words $(packages)),$(packages))
+# the n-1 first packages
+stage1iter_1 := $(wordlist 2,$(words $(stage1iter)),$(stage1iter))
+previous := $(wordlist 1,$(words $(stage1iter_1)),$(ALL))
+previousmks := $(foreach package,$(previous),MAKE/$(package).mk)
+include $(previousmks)
+all: verbose
+verbose:
+ @echo "========== stage1iter : $(package)"
+# @echo "stage1iter : included .mk files : $(previousmks)"
+all: $($(package).specpath)
+all: MAKE/$(package).mk
+else
+### stage1
+ifneq "$(stage1)" ""
+all : verbose
+verbose :
+ @echo "========== stage1"
+all : spec2make
+all : .rpmmacros
+# specs and makes are done sequentially by stage1iter
+all : stage1iter
+stage1iter:
+ arg=""; for n in $(ALL) ; do arg="$$arg x"; $(MAKE) --no-print-directory stage1iter="$$arg"; done
+### regular make
+else
+### once .mks are OK, you can run make normally
+include $(ALLMKS)
+#all : tarballs
+#all : sources
+#all : modules
+#all : rpms
+#all : srpms
+# mention $(ALL) here rather than rpms
+# this is because the inter-package dependencies are expressed like
+# util-vserver: util-python
+all: rpms
+all: repo
+endif
+endif
-#
-# bootmanager
-#
+### yumgroups.xml : compute from all known .pkgs files
+RPMS/yumgroups.xml:
+ mkdir -p RPMS
+ ./yumgroups.sh $(PLDISTRO) > $@
-bootmanager-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-bootmanager-MODULE := bootmanager
-bootmanager-SPEC := bootmanager/bootmanager.spec
-bootmanager-RPMBUILD := sudo rpmbuild
-ALL += bootmanager
+createrepo = createrepo --quiet -g yumgroups.xml RPMS/
-# bootmanager requires current packages
-bootmanager: $(filter-out bootmanager,$(ALL))
+repo: RPMS/yumgroups.xml
+ $(createrepo)
-# ...and the yum manifest
-bootmanager: RPMS/yumgroups.xml
+.PHONY: repo
+####################
+# notes:
+# * we always use the first module's location (SVNPATH/GITPATH) to extract the spec file
+# * no matter what SCM is used, SPEC should hold a relative path from the module's root
#
-# bootcd
-#
-
-bootcd-CVSROOT := :pserver:anon@cvs.planet-lab.org:/cvs
-bootcd-MODULE := bootcd_v3
-bootcd-SPEC := bootcd_v3/bootcd.spec
-bootcd-RPMBUILD := sudo rpmbuild
-ALL += bootcd
-
-# bootcd requires current packages
-bootcd: $(filter-out bootcd,$(ALL))
-
-# ...and the yum manifest
-bootcd: RPMS/yumgroups.xml
+define stage1_package_vars
+$(1).module := $(firstword $($(1)-MODULES))
+$(1).specpath := SPECS/$(notdir $($(1)-SPEC))
+$(1).moduledir := MODULES/$$($(1).module)
+$(1).codespec := MODULES/$$($(1).module)/$($(1)-SPEC)
+$(1).spec2makeflags := $(if $($(1)-WHITELIST-RPMS),--whitelist-rpms $($(1)-WHITELIST-RPMS),)
+endef
-ifeq ($(findstring $(package),$(ALL)),)
+$(foreach package, $(ALL), $(eval $(call stage1_package_vars,$(package))))
-# Build all packages
-all: $(ALL)
- # Create package manifest
- sh ./packages.sh -b "http://build.planet-lab.org/$(subst $(HOME)/,,$(shell pwd))/SRPMS" SRPMS > SRPMS/packages.xml
+# compute all modules
+ALL.modules := build tests
+$(foreach package,$(ALL), $(eval ALL.modules+=$($(package)-MODULES)))
+ALL.modules:=$(sort $(ALL.modules))
-RPMS/yumgroups.xml:
- install -D -m 644 groups/v3_yumgroups.xml RPMS/yumgroups.xml
-
-# Recurse
-$(ALL):
- $(MAKE) package=$@
- yum-arch RPMS
- yum-arch SRPMS
-
-# Upload packages to boot server
-SERVER := build@boot.planet-lab.org
-ARCHIVE := /var/www/html/install-rpms/archive
-
-# Put nightly alpha builds in a subdirectory
-ifeq ($(TAG),HEAD)
-ARCHIVE := $(ARCHIVE)/planetlab-alpha
-REPOS := /var/www/html/install-rpms/planetlab-alpha
-endif
-
-install:
-ifeq ($(BASE),)
- @echo make install is only meant to be called from ./build.sh
+# extract revision from -SVNPATH or tag from -GITPATH
+define stage1_module_vars
+ifneq "$($(1)-SVNPATH)" ""
+$(1)-SVNPATH := $(strip $($(1)-SVNPATH))
+$(1)-SCMPATH := $(strip $($(1)-SVNPATH))
else
-ifneq ($(BUILDS),)
- # Remove old runs
- echo "cd $(ARCHIVE) && ls -t | sed -n $(BUILDS)~1p | xargs rm -rf" | ssh $(SERVER) /bin/bash -s
-endif
- # Populate repository
- ssh $(SERVER) mkdir -p $(ARCHIVE)/$(BASE)/RPMS $(ARCHIVE)/$(BASE)/SRPMS
- rsync --delete --links --perms --times --group --compress --rsh=ssh \
- $(sort $(subst -debuginfo,,$(wildcard RPMS/yumgroups.xml RPMS/*/*))) $(SERVER):$(ARCHIVE)/$(BASE)/RPMS/
- ssh $(SERVER) yum-arch $(ARCHIVE)/$(BASE)/RPMS >/dev/null
- rsync --delete --links --perms --times --group --compress --rsh=ssh \
- $(wildcard SRPMS/*) $(SERVER):$(ARCHIVE)/$(BASE)/SRPMS/
- ssh $(SERVER) yum-arch $(ARCHIVE)/$(BASE)/SRPMS >/dev/null
-ifeq ($(TAG),HEAD)
- # Update nightly alpha symlink if it does not exist or is broken, or it is Monday
- if ! ssh $(SERVER) "[ -e $(REPOS) ] && exit 0 || exit 1" || [ "$(shell date +%A)" = "Monday" ] ; then \
- ssh $(SERVER) ln -nsf $(ARCHIVE)/$(BASE)/RPMS/ $(REPOS) ; \
- fi
+$(1)-GITPATH := $$(strip $$($(1)-GITPATH))
+$(1)-SCMPATH := $$(strip $$($(1)-GITPATH))
+$(1).gitrepo := $$(firstword $$(subst @, ,$$($(1)-GITPATH)))
+$(1).gittag := $$(word 2,$$(subst @, ,$$($(1)-GITPATH)))
+$(1).gittag := $$(if $$($(1).gittag),$$($(1).gittag),master)
endif
+endef
+
+$(foreach module,$(ALL.modules), $(eval $(call stage1_module_vars,$(module))))
+
+#
+# for each package, compute whether we need to set date
+# the heuristic is that we mention the date as part of the rpm release flag if
+# (*) the package has requested it by setting package-RPMDATE (container packages should do that)
+# (*) or SVNPATH contains 'trunk' or 'branches'
+# (*) or GITPATH has no '@' (trunk)
+# (*) or GITPATH contains a '@', and the gittag part has no '-' (this is to tell a tag from a branch..)
+#
+define package_hasdate
+$(1).has-date = $(if $($(1)-RPMDATE),yes, \
+ $(if $($($(1).module)-SVNPATH), \
+ $(if $(findstring /trunk,$($($(1).module)-SVNPATH)),yes, \
+ $(if $(findstring /branches,$($($(1).module)-SVNPATH)),yes,)), \
+ $(if $(not $($($(1).module).gittag)), yes,\
+ $(if $(findstring -,$($($(1).module).gittag)),,yes))))
+endef
+
+$(foreach package, $(ALL), $(eval $(call package_hasdate,$(package))))
+
+### the common header for generated specfiles
+# useful when trying new specfiles manually
+###
+# note for fedora23 (and onwards, probably)
+# many rpms wouldn't build as-is and issue an weird error
+##
+# Processing files: pl_sshd-debuginfo-1.0-11.lxc.x86_64
+# error: Empty %files file /longbuildroot/BUILD/pl_sshd-1.0/debugfiles.list
+##
+# so to work around that we define debug_package as being nil
+# only for f23 for now, let's see what this gives us..
+header.spec:
+ (echo -n "# Generated by planetlab build on " ; date) > $@
+ echo "%define distro $(DISTRO)" >> $@
+ echo "%define distrorelease $(RELEASE)" >> $@
+ echo "%define distroname $(DISTRONAME)" >> $@
+ echo "%define pldistro $(PLDISTRO)" >> $@
+ echo "%define plrelease $(PLANETLAB_RELEASE)" >> $@
+ echo "# use MD5 and gzip for binary and source files" >> $@
+ echo "%global _binary_filedigest_algorithm 1" >> $@
+ echo "%global _source_filedigest_algorithm 1" >> $@
+ echo "%global _source_payload w9.gzdio" >> $@
+ echo "%global _binary_payload w9.gzdio" >> $@
+ echo "%define debug_package %{nil}" >> $@
+
+### make up spec file - extract module first
+define target_spec
+$($(1).specpath): header.spec $($(1).codespec)
+ mkdir -p SPECS
+ cat header.spec > $($(1).specpath)
+ echo "%define SCMURL $($($(1).module)-SCMPATH)" >> $($(1).specpath)
+ $(if $($(1).has-date),echo "%define date $(shell date +%Y.%m.%d)" >> $($(1).specpath),)
+ $(if $($(1)-SPECVARS), \
+ $(foreach line,$($(1)-SPECVARS), \
+ echo "%define" $(word 1,$(subst =, ,$(line))) "$(word 2,$(subst =, ,$(line)))" >> $($(1).specpath) ;))
+ echo "# included from $($(1)-SPEC)" >> $($(1).specpath)
+ cat $($(1).codespec) >> $($(1).specpath)
+
+$($(1).codespec): $($(1).moduledir)
+
+endef
+
+$(foreach package,$(ALL),$(eval $(call target_spec,$(package))))
+
+####################
+# fetch modules
+# expected input:
+# $(1) is the name of a git module
+# $($(1).gitrepo) and $(($1).gittag) are used to determine branch or tag name
+# expected result
+# $(1)/ in the cwd will hold the result
+
+# fetch svn module
+define fetch_svn_module
+ svn export $($(1)-SVNPATH) $(1)
+endef
+
+# git_fetch_module
+# as far as possible we use git-archive to fetch a git module
+# however if that fails we fallback to a git-clone strategy,
+# for when git-archive is not supported, e.g. for github
+# side effect
+# $(1)/ gets cleaned up if job cannot be done
+define fetch_git_module
+ mkdir $(1) ; \
+ ( git clone $($(1).gitrepo) $(1); cd $(1) ; git checkout $($(1).gittag) ; rm -rf .git ) || \
+ { rm -rf $(1); false; }
+endef
+
+### module extraction
+define target_extract_module
+MODULES/$(1):
+ @(echo -n "XXXXXXXXXXXXXXX -- BEG MODULE $(1) : $@ " ; date)
+ mkdir -p MODULES
+ cd MODULES && \
+ $(if $($(1)-SVNPATH),$(call fetch_svn_module,$(1)),$(call fetch_git_module,$(1)) )
+ @(echo -n "XXXXXXXXXXXXXXX -- END MODULE $(1) : $@ " ; date)
+
+$(1)-module: MODULES/$(1)
+.PHONY: $(1)-module
+endef
+
+$(foreach module,$(ALL.modules),$(eval $(call target_extract_module,$(module))))
+
+### the tests area
+build-clean:
+ rm -rf MODULES/build
+.PHONY: build-clean
+
+tests-clean:
+ rm -rf MODULES/tests
+.PHONY: tests-clean
+
+###
+# Base rpmbuild in the current directory
+# issues on fedora 8 : see the following posts
+# http://forums.fedoraforum.org/showthread.php?t=39625 - and more specifically post#6
+# https://www.redhat.com/archives/fedora-devel-list/2007-November/msg00171.html
+REALROOT=/build
+FAKEROOT=/longbuildroot
+PWD=$(shell /bin/pwd)
+ifeq "$(PWD)" "$(REALROOT)"
+export HOME := $(FAKEROOT)
+else
+export HOME := $(PWD)
endif
-# Remove files generated by this package
-$(foreach package,$(ALL),$(package)-clean): %-clean:
- $(MAKE) package=$* clean
-
-# Remove all generated files
-clean:
- rm -rf BUILD RPMS SOURCES SPECS SRPMS .rpmmacros .cvsps tmp
-
-.PHONY: all $(ALL) $(foreach package,$(ALL),$(package)-clean) clean
-
+# rpm macros
+# build.common (getrpmmacros.sh) defines some utilities we want in place on our images
+# in addition to these we set a few others for the build
+.rpmmacros:
+ifeq "$(shell pwd)" "/build"
+ rm -f $(FAKEROOT) ; ln -s $(REALROOT) $(FAKEROOT)
+endif
+ rm -f $@
+ echo "%_topdir $(HOME)" >> $@
+ echo "%_tmppath $(HOME)/tmp" >> $@
+ echo "%__spec_install_pre %{___build_pre}" >> $@
+ ./getrpmmacros.sh >> $@
+
+### this utility allows to extract various info from a spec file
+### and to define them in makefiles
+# use the C code where it works as it's the original one, use the python code otherwise
+spec2make: spec2make.py
+ ln -s spec2make.py $@
+
+### run spec2make on the spec file and include the result
+# usage: spec2make package
+# with old rpms (f8&c5) and too recent specfiles (the kernel), we need a patch to spec2make
+# so when <package-NEEDSPECK2MAKEHACK is set, we run spec2make with the --hack flag
+define target_mk
+MAKE/$(1).mk: $($(1).specpath) spec2make .rpmmacros
+ mkdir -p MAKE
+ ./spec2make $($(1).spec2makeflags) $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk || { rm MAKE/$(1).mk; exit 1; }
+endef
+
+$(foreach package,$(ALL),$(eval $(call target_mk,$(package))))
+
+# stores env variables in a file
+# this is done at stage1. later run won't get confused
+STATIC_VARS=PLDISTRO PLDISTROTAGS build-GITPATH PERSONALITY MAILTO BASE WEBPATH TESTBUILDURL WEBROOT
+# find out names for variables set on the command line
+define assigned_varname
+$(if $(findstring =,$(1)),$(firstword $(subst =, ,$(1))) )
+endef
+ASSIGNED=$(filter-out stage1 stage1iter,$(foreach flag,$(MAKEFLAGS),$(call assigned_varname,$(flag))))
+SAVED_VARS=$(sort $(STATIC_VARS) $(ASSIGNED))
+envfrompreviousrun.mk:
+ @echo "# do not edit" > $@
+ @$(foreach var,$(SAVED_VARS),echo "$(var):=$($(var))" >> $@ ;)
+ @echo "# do not edit" > aliases
+ @echo -n "alias m=\"make " >> aliases
+ @$(foreach var,$(SAVED_VARS),echo -n " $(var)=$($(var))" >> aliases ;)
+ @echo "\"" >> aliases
+ @echo "alias m1=\"m stage1=true\"" >> aliases
+
+envfrompreviousrun: envfrompreviousrun.mk
+.PHONY: envfrompreviousrun
+
+# always refresh this
+all: envfrompreviousrun
+
+#################### regular make
+
+define stage2_variables
+### devel dependencies
+$(1).rpmbuild = $(RPMBUILD) $($(1)-RPMFLAGS)
+$(1).all-local-devel-rpm-paths := $(foreach rpm,$($(1)-LOCAL-DEVEL-RPMS) $($(1)-LOCAL-DEVEL-RPMS-CRUCIAL),$($(rpm).rpm-path))
+$(1).depend-devel-packages := $(sort $(foreach rpm,$($(1)-LOCAL-DEVEL-RPMS),$($(rpm).package)))
+ALL-STOCK-DEVEL-RPMS += $($(1)-LOCAL-DEVEL-RPMS)
+endef
+
+$(foreach package,$(ALL),$(eval $(call stage2_variables,$(package))))
+ALL-STOCK-DEVEL-RPMS := $(sort $(ALL-STOCK-DEVEL-RPMS))
+
+
+### pack sources into tarballs
+ALLTARBALLS:= $(foreach package, $(ALL), $($(package).tarballs))
+tarballs: $(ALLTARBALLS)
+ @echo $(words $(ALLTARBALLS)) source tarballs OK
+.PHONY: tarballs
+
+SOURCES/%.tar.xz: SOURCES/%
+ tar chpJf $@ -C SOURCES $*
+
+SOURCES/%.tar.bz2: SOURCES/%
+ tar chpjf $@ -C SOURCES $*
+
+SOURCES/%.tar.gz: SOURCES/%
+ tar chpzf $@ -C SOURCES $*
+
+SOURCES/%.tgz: SOURCES/%
+ tar chpzf $@ -C SOURCES $*
+
+##
+URLS/%: url=$(subst @colon@,:,$(subst @slash@,/,$(notdir $@)))
+URLS/%: basename=$(notdir $(url))
+URLS/%:
+ echo curl $(url) -o SOURCES/$(basename)
+ touch $@
+
+### the directory SOURCES/<package>-<version> is made
+# with a (set of) copy -rl from MODULES/<module>
+# the former is $(package.source)
+ALLSOURCES:=$(foreach package, $(ALL), $($(package).source))
+# so that make does not use the rule below directly for creating the tarball files
+.SECONDARY: $(ALLSOURCES)
+
+sources: $(ALLSOURCES)
+ @echo $(words $(ALLSOURCES)) versioned source trees OK
+.PHONY: sources
+
+# argument is a package
+# do things differently if multiple modules are mentioned (sigh..)
+define target_copy_link_modules_sources
+$($(1).source): $(foreach module,$($(1)-MODULES),MODULES/$(module))
+ $(if $(word 2,$($(1)-MODULES)),\
+ mkdir -p $($(1).source) && $(foreach module,$($(1)-MODULES), cp -rl MODULES/$(module) $($(1).source)/$(module);) ,\
+ mkdir -p SOURCES && cp -rl MODULES/$($(1)-MODULES) $($(1).source))
+endef
+
+$(foreach package,$(ALL),$(eval $(call target_copy_link_modules_sources,$(package))))
+
+### code extraction
+ALLMODULES:=$(foreach module, $(ALL.modules), MODULES/$(module))
+.SECONDARY: $(ALLMODULES)
+modules: $(ALLMODULES)
+ @echo $(words $(ALLMODULES)) modules OK "(fetched from scm)"
+.PHONY: modules
+
+### source rpms
+ALLSRPMS:=$(foreach package,$(ALL),$($(package).srpm))
+srpms: $(ALLSRPMS)
+ @echo $(words $(ALLSRPMS)) source rpms OK
+.PHONY: srpms
+
+#################### manage build requirements
+# default values
+RPMYUM-INSTALL-LOCAL := rpm --force -Uvh
+RPMYUM-INSTALL-STOCK := yum -y install
+# uninstall -- cannot force rpm -e
+# need to ignore result, kernel-headers cannot be uninstalled as glibc depends on it
+RPMYUM-UNINSTALL-STOCK := rpm -e
+
+### these macro handles the LOCAL-DEVEL-RPMS and LOCAL-DEVEL-RPMS-CRUCIAL tags for a given package
+# before building : rpm-install LOCAL-DEVEL-RPMS
+define rpmyum_install_local_rpms
+ $(if $($(1).all-local-devel-rpm-paths), echo "Installing for $(1)-LOCAL-DEVEL-RPMS" ; $(RPMYUM-INSTALL-LOCAL) $($(1).all-local-devel-rpm-paths))
+endef
+
+# install stock rpms if defined
+define rpmyum_install_stock_rpms
+ $(if $($(1)-STOCK-DEVEL-RPMS), echo "Installing for $(1)-STOCK-DEVEL-RPMS" ; $(RPMYUM-INSTALL-STOCK) $($(1)-STOCK-DEVEL-RPMS) || true)
+endef
+
+define rpmyum_uninstall_stock_rpms
+ -$(if $($(1)-STOCK-DEVEL-RPMS), echo "Unstalling for $(1)-STOCK-DEVEL-RPMS" ; $(RPMYUM-UNINSTALL-STOCK) $($(1)-STOCK-DEVEL-RPMS) || true)
+endef
+
+# similar for debians
+# gdebi acts like yum localinstall; gdebi-core should be mentioned in develdeb.pkgs
+DPKGAPT-INSTALL-LOCAL := gdebi
+DPKGAPT-INSTALL-STOCK := apt-get -y install
+DPKGAPT-UNINSTALL-STOCK := echo WARNING uninstalling stock debs not implemented
+
+define dpkgapt_install_local_debs
+ $(if $($(1)-LOCAL-DEVEL-DEBS), echo "Installing for $(1)-LOCAL-DEVEL-DEBS" ; $(foreach debname,$($(1)-LOCAL-DEVEL-DEBS),$(DPKGAPT-INSTALL-LOCAL) $(wildcard DEBIAN/$(debname)_*.deb);))
+endef
+
+define dpkgapt_install_stock_debs
+ $(if $($(1)-STOCK-DEVEL-DEBS), echo "Installing for $(1)-STOCK-DEVEL-DEBS" ; $(DPKGAPT-INSTALL-STOCK) $($(1)-STOCK-DEVEL-DEBS) || true)
+endef
+
+define dpkgapt_uninstall_stock_debs
+ -$(if $($(1)-STOCK-DEVEL-DEBS), echo "Unstalling for $(1)-STOCK-DEVEL-DEBS" ; $(DPKGAPT-UNINSTALL-STOCK) $($(1)-STOCK-DEVEL-DEBS) || true)
+endef
+
+
+####################
+# usage: target_source_rpm package
+define target_source_rpm
+ifeq "$($(1)-BUILD-FROM-SRPM)" ""
+$($(1).srpm): $($(1).specpath) .rpmmacros $($(1).tarballs)
+ mkdir -p BUILD SRPMS tmp
+ @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using SOURCES) " ; date)
+ $(call rpmyum_install_stock_rpms,$(1))
+ $(call rpmyum_install_local_rpms,$(1))
+ $($(1).rpmbuild) -bs $($(1).specpath)
+ $(call rpmyum_uninstall_stock_rpms,$(1))
+ @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
else
-
-# Define variables for Makerules
-CVSROOT := $(if $($(package)-CVSROOT),$($(package)-CVSROOT),$(CVSROOT))
-INITIAL := $(if $($(package)-INITIAL),$($(package)-INITIAL),$(INITIAL))
-TAG := $(if $($(package)-TAG),$($(package)-TAG),$(TAG))
-MODULE := $($(package)-MODULE)
-SPEC := $($(package)-SPEC)
-RPMFLAGS := $($(package)-RPMFLAGS)
-RPMBUILD := $(if $($(package)-RPMBUILD),$($(package)-RPMBUILD),rpmbuild)
-CVS_RSH := $(if $($(package)-CVS_RSH),$($(package)-CVS_RSH),ssh)
-
-include Makerules
-
+$($(1).srpm): $($(1).specpath) .rpmmacros $($(1).source)
+ mkdir -p BUILD SRPMS tmp
+ @(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using make srpm) " ; date)
+ $(call rpmyum_install_stock_rpms,$(1))
+ $(call rpmyum_install_local_rpms,$(1))
+ make -C $($(1).source) srpm SPECFILE=$(HOME)/$($(1).specpath) EXPECTED_SRPM=$(notdir $($(1).srpm)) && \
+ rm -f SRPMS/$(notdir $($(1).srpm)) && \
+ ln $($(1).source)/$(notdir $($(1).srpm)) SRPMS/$(notdir $($(1).srpm))
+ $(call rpmyum_uninstall_stock_rpms,$(1))
+ @(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
endif
+endef
+
+$(foreach package,$(ALL),$(eval $(call target_source_rpm,$(package))))
+
+### binary rpms are made from source rpm
+ALLRPMS:=$(foreach package,$(ALL),$($(package).rpms))
+# same as above, mention $(ALL) and not $(ALLRPMS)
+rpms: $(ALLRPMS)
+ @echo $(words $(ALLRPMS)) binary rpms OK
+.PHONY: rpms
+
+# use tmp dirs when building binary rpm so make remains idempotent
+# otherwise SOURCES/ or SPEC gets touched again - which leads to rebuilding
+RPM-USE-TMP-DIRS = --define "_sourcedir $(HOME)/tmp" --define "_specdir $(HOME)/tmp"
+RPM-USE-COMPILE-DIRS = --define "_sourcedir $(HOME)/COMPILE" --define "_specdir $(HOME)/COMPILE"
+
+# usage: build_binary_rpm package
+# xxx hacky - invoke createrepo if DEPEND-FILES mentions RPMS/yumgroups.xml
+define target_binary_rpm
+$($(1).rpms): $($(1).srpm)
+ mkdir -p RPMS tmp
+ @(echo -n "XXXXXXXXXXXXXXX -- BEG RPM $(1) " ; date)
+ $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
+ $(call rpmyum_install_stock_rpms,$(1))
+ $(call rpmyum_install_local_rpms,$(1))
+ $($(1).rpmbuild) --rebuild $(RPM-USE-TMP-DIRS) $($(1).srpm)
+ $(call rpmyum_uninstall_stock_rpms,$(1))
+ @(echo -n "XXXXXXXXXXXXXXX -- END RPM $(1) " ; date)
+# for manual use only - in case we need to investigate the results of an rpmbuild
+$(1)-compile: $($(1).srpm)
+ mkdir -p COMPILE tmp
+ @(echo -n "XXXXXXXXXXXXXXX -- BEG compile $(1) " ; date)
+ $(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
+ $(call rpmyum_install_stock_rpms,$(1))
+ $(call rpmyum_install_local_rpms,$(1))
+ $($(1).rpmbuild) --recompile $(RPM-USE-TMP-DIRS) $($(1).srpm)
+ $(call rpmyum_uninstall_stock_rpms,$(1))
+ @(echo -n "XXXXXXXXXXXXXXX -- END compile $(1) " ; date)
+.PHONY: $(1)-compile
+endef
+
+$(foreach package,$(ALL),$(eval $(call target_binary_rpm,$(package))))
+### shorthand target
+# e.g. make proper -> does propers rpms
+# usage shorthand_target package
+define target_shorthand
+$(1): $($(1).rpms)
+.PHONY: $(1)
+$(1)-spec: $($(1)-SPEC)
+.PHONY: $(1)-spec
+$(1)-mk: $($(1)-MK)
+.PHONY: $(1)-mk
+$(1)-tarball: $($(1).tarballs)
+.PHONY: $(1)-tarball
+.PHONY: $(1)-source
+$(1)-source: $($(1).source)
+$(1)-rpms: $($(1).rpms)
+.PHONY: $(1)-rpms
+$(1)-srpm: $($(1).srpm)
+.PHONY: $(1)-srpm
+endef
+
+$(foreach package,$(ALL),$(eval $(call target_shorthand,$(package))))
+
+### file dependencies
+define package_depends_on_file
+$(1):$(2)
+$($(1).srpm):$(2)
+endef
+
+define target_dependfiles
+$(foreach file,$($(1)-DEPEND-FILES),$(eval $(call package_depends_on_file,$(1),$(file))))
+endef
+
+$(foreach package,$(ALL),$(eval $(call target_dependfiles,$(package))))
+
+### package dependencies
+define package_depends_on_package
+$(1):$(2)
+$(1):$($(2).rpms)
+$($(1).srpm):$($(2).rpms)
+endef
+
+define target_depends
+$(foreach package,$($(1)-DEPEND-PACKAGES) $($(1).depend-devel-packages),$(eval $(call package_depends_on_package,$(1),$(package))))
+endef
+
+$(foreach package,$(ALL),$(eval $(call target_depends,$(package))))
+
+####################
+# debian meta-target
+ALL-DEBIAN := $(foreach target,$(ALL),$(target)-debian)
+debian: $(ALL-DEBIAN)
+
+####################
+# very rough for now (one module per package), targets only sfa for now
+# the general idea here is, changing the specfile (for version number and all) is enough, and this
+# gets passed to "make debian" in the module
+# PREFIX: at one point we had passed PREFIX=/usr to this 'make debian'
+# however it turned out we could manage this some other way (see manifold)
+# so I'm reverting to simplicity
+define target_debian
+$(1)-debian: $(1)-tarball
+ $(call dpkgapt_install_local_debs,$(1))
+ $(call dpkgapt_install_stock_debs,$(1))
+ mkdir -p DEBIAN/$(1)
+ rsync -a MODULES/$($(1).module)/ DEBIAN/$(1)/
+ make -C DEBIAN/$(1) "RPMTARBALL=$(HOME)/$($(1).tarballs)" "RPMVERSION=$($(1).rpm-version)" "RPMRELEASE=$($(1).rpm-release)" "RPMNAME=$($(1).rpm-name)" debian
+ $(call dpkgapt_uninstall_stock_debs,$(1))
+endef
+
+$(foreach package,$(ALL),$(eval $(call target_debian,$(package))))
+
+### clean target
+# usage: target_clean package
+define target_clean
+$(1)-clean-modules:
+ $(foreach module,$($(1)-MODULES),rm -rf MODULES/$(module);)
+.PHONY: $(1)-clean-modules
+CLEANS += $(1)-clean-modules
+$(1)-clean-source:
+ rm -rf $($(1).source)
+.PHONY: $(1)-clean-source
+CLEANS += $(1)-clean-source
+$(1)-clean-tarball:
+ rm -rf $($(1).tarballs)
+.PHONY: $(1)-clean-tarball
+CLEANS += $(1)-clean-tarball
+$(1)-clean-build:
+ rm -rf BUILD/$(notdir $($(1).source))
+CLEANS += $(1)-clean-build
+$(1)-clean-rpms:
+ rm -rf $($(1).rpms)
+.PHONY: $(1)-clean-rpms
+CLEANS += $(1)-clean-rpms
+$(1)-clean-srpm:
+ rm -rf $($(1).srpm)
+.PHONY: $(1)-clean-srpm
+CLEANS += $(1)-clean-srpm
+$(1)-clean-debian:
+ rm -rf DEBIAN/$(1)
+.PHONY: $(1)-clean-srpm
+CLEANS += $(1)-clean-srpm
+$(1)-codeclean: $(1)-clean-source $(1)-clean-tarball $(1)-clean-build $(1)-clean-rpms $(1)-clean-srpm $(1)-clean-debian
+$(1)-clean: $(1)-clean-modules $(1)-codeclean
+.PHONY: $(1)-codeclean $(1)-clean
+$(1)-clean-spec:
+ rm -rf $($(1).specpath)
+.PHONY: $(1)-clean-spec
+$(1)-clean-make:
+ rm -rf MAKE/$(1).mk
+.PHONY: $(1)-clean-make
+$(1)-distclean: $(1)-distclean1 $(1)-distclean2
+$(1)-distclean1: $(1)-clean-spec $(1)-clean-make
+$(1)-distclean2: $(1)-clean
+.PHONY: $(1)-distclean $(1)-distclean1 $(1)-distclean2
+endef
+
+$(foreach package,$(ALL),$(eval $(call target_clean,$(package))))
+
+### clean precisely
+clean:
+ $(MAKE) $(CLEANS)
+.PHONY: clean
+
+clean-help:
+ @echo Available clean targets
+ @echo $(CLEANS)
+
+### brute force clean
+distclean1:
+ rm -rf envfrompreviousrun.mk .rpmmacros spec2make header.spec SPECS MAKE $(DISTCLEANS)
+distclean2:
+ rm -rf MODULES SOURCES BUILD BUILDROOT RPMS SRPMS DEBIAN tmp
+distclean: distclean1 distclean2
+.PHONY: distclean1 distclean2 distclean
+
+develclean:
+ -$(RPMYUM-UNINSTALL-STOCK) $(ALL-STOCK-DEVEL-RPMS)
+
+####################
+# gather build information for the 'About' page
+# when run from crontab, INIT_CWD not properly set (says /root ..)
+# so, the nightly build passes BASE here
+# also store BASE in .base for any post-processing purposes
+myplc-release:
+ @echo 'Creating myplc-release'
+ rm -f $@
+ echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx build info" >> $@
+ $(MAKE) --no-print-directory version-build >> $@
+ echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx svn info" >> $@
+ $(MAKE) --no-print-directory version-tags >> $@
+ echo "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx rpm info" >> $@
+ $(MAKE) --no-print-directory version-rpms >> $@
+ @echo $(BASE) > .base
+
+version-build:
+ @echo -n 'Build build-date: ' ; date '+%Y.%m.%d'
+ @echo -n 'Build build-time: ' ; date '+%H:%M-%Z'
+ @echo -n 'Build build-hostname: ' ; hostname
+ @echo "Build build-base: $(BASE)"
+ @echo "Build planetlab-distro: $(PLDISTRO)"
+ @echo "Build planetlab-tags: $(PLDISTROTAGS)"
+ @echo "Build target-arch: $(HOSTARCH)"
+ @echo "Build target-distro: $(DISTRO)"
+ @echo "Build target-distroname: $(DISTRONAME)"
+ @echo "Build target-release: $(RELEASE)"
+ @echo "Build target-personality: $(PERSONALITY)"
+
+####################
+# for a given module
+VFORMAT="%30s := %s\n"
+define print_tag_target
+$(1)-version-tag:
+ @$(if $($(1)-SVNPATH),\
+ printf $(VFORMAT) $(1)-SVNPATH "$($(1)-SVNPATH)",\
+ printf $(VFORMAT) $(1)-GITPATH "$($(1)-GITPATH)" )
+endef
+
+$(foreach module,$(ALL.modules), $(eval $(call print_tag_target,$(module))))
+
+version-tags: $(foreach module, $(ALL.modules), $(module)-version-tag)
+
+RFORMAT="%20s :: version=%s release=%s\n"
+define rpm_version_target
+$(1)-version-rpm:
+ @printf $(RFORMAT) $($(1).rpm-name) $($(1).rpm-version) $($(1).rpm-release)
+version-rpms: $(1)-version-rpm
+endef
+
+$(foreach package,$(sort $(ALL)), $(eval $(call rpm_version_target,$(package))))
+
+versions: myplc-release version-build version-tags version-rpms
+.PHONY: versions version-build version-rpms version-tags
+
+#################### package info
+PKGKEYS := tarballs source srpm rpms rpmnames rpm-release rpm-name rpm-version rpm-subversion
+%-pkginfo: package=$(subst -pkginfo,,$@)
+%-pkginfo:
+ @$(foreach key,$(PKGKEYS),echo "$(package).$(key)=$($(package).$(key))";)
+## rpm info
+RPMKEYS := rpm-path package
+%-rpminfo: rpm=$(subst -rpminfo,,$@)
+%-rpminfo:
+ @$(foreach key,$(RPMKEYS),echo "$(rpm).$(key)=$($(rpm).$(key))";)
+
+#################### various lists - designed to run with stage1=true
+info-packages:
+ @$(foreach package,$(ALL), echo package=$(package) ref_module=$($(package).module) modules=$($(package)-MODULES) rpmnames=$($(package).rpmnames); )
+
+info-modules:
+ @$(foreach module,$(ALL.modules), echo module=$(module) \
+ $(if $($(module)-SVNPATH),svnpath=$($(module)-SVNPATH),gitpath=$($(module)-GITPATH)) ; )
+
+info-branches:
+ @$(foreach module,$(ALL.modules), \
+ $(if $($(module)-BRANCH),echo module=$(module) branch=$($(module)-BRANCH);))
+
+module-tools:
+ @$(foreach module,$(ALL.modules), \
+ $(if $($(module)-GITPATH), \
+ $(if $($(module)-BRANCH), \
+ echo $(module):$($(module)-BRANCH); , \
+ echo $(module); ), \
+ $(if $($(module)-BRANCH), \
+ echo $(module):$($(module)-BRANCH); , \
+ echo $(module); )))
+
+info: info-packages info-modules info-branches
+
+.PHONY: info info-packages info-modules info-branches module-tools
+
+show-multi-modules:
+ @$(foreach package,$(ALL),$(if $(subst x1,,x$(words $($(package)-MODULES))), echo p=$(package) mods=$($(package)-MODULES) ;))
+.PHONY: show-multi-modules
+####################
+help:
+ @echo "********** Run make in two stages:"
+ @echo ""
+ @echo "make stage1=true PLDISTRO=onelab"
+ @echo " -> extracts all spec files in SPECS/ and mk files in MAKE/"
+ @echo " as well as save PLDISTRO for subsequent runs"
+ @echo ""
+ @echo "********** Then you can use the following targets"
+ @echo 'make'
+ @echo " rebuilds everything"
+ @echo 'make util-vserver'
+ @echo " makes the RPMS related to util-vserver"
+ @echo " equivalent to 'make util-vserver-rpms'"
+ @echo ""
+ @echo "********** Or, vertically - step-by-step for a given package"
+ @echo 'make util-vserver-source'
+ @echo " creates source link in SOURCES/util-vserver-<version>"
+ @echo 'make util-vserver-tarball'
+ @echo " creates source tarball in SOURCES/util-vserver-<version>.<tarextension>"
+ @echo 'make util-vserver-srpm'
+ @echo " build source rpm in SRPMS/"
+ @echo 'make util-vserver-rpms'
+ @echo " build rpm(s) in RPMS/"
+ @echo ""
+ @echo "********** Or, horizontally, reach a step for all known packages"
+ @echo 'make sources'
+ @echo 'make tarballs'
+ @echo 'make srpms'
+ @echo 'make rpms'
+ @echo ""
+ @echo "********** Manual targets"
+ @echo "make package-compile"
+ @echo " The regular process uses rpmbuild --rebuild, that performs"
+ @echo " a compilation directory cleanup upon completion. If you need to investigate"
+ @echo " the intermediate compilation directory, use the -compile targets"
+ @echo "********** Cleaning examples"
+ @echo "make clean"
+ @echo " removes the files made by make"
+ @echo "make distclean"
+ @echo " brute-force cleaning, removes entire directories - requires a new stage1"
+ @echo "make develclean"
+ @echo " rpm-uninstalls all devel packages installed during build"
+ @echo ""
+ @echo "make iptables-distclean"
+ @echo " deep clean for a given package"
+ @echo "make iptables-codeclean"
+ @echo " run this if you've made a local/manual change in the MODULES area for iptables"
+ @echo ""
+ @echo "make util-vserver-clean"
+ @echo " removes codebase, source, tarball, build, rpm and srpm for util-vserver"
+ @echo "make util-vserver-clean-modules"
+ @echo " and so on for source, tarball, build, rpm and srpm"
+ @echo ""
+ @echo "********** Info examples"
+ @echo "make ++ALL"
+ @echo " Displays the value of a given variable (here ALL)"
+ @echo " with only a single plus sign only the value is displayed"
+ @echo "make info"
+ @echo " is equivalent to make packages modules branches"
+ @echo " provides various info on these objects"
+ @echo "make ulogd-pkginfo"
+ @echo " Displays know attributes of a package"
+ @echo "make kernel-devel-rpminfo"
+ @echo " Displays know attributes of an rpm"
+ @echo "make stage1=true PLDISTROTAGS=planetlab-tags-4.2.mk packages modules branches module-tools"
+ @echo " Lists mentioned items - module-tools is used in modules.update"
+ @echo ""
+ @echo "********** Known pakages are"
+ @echo "$(ALL)"
+
+#################### convenience, for debugging only
+# make +foo : prints the value of $(foo)
+# make ++foo : idem but verbose, i.e. foo=$(foo)
+++%: varname=$(subst +,,$@)
+++%:
+ @echo "$(varname)=$($(varname))"
++%: varname=$(subst +,,$@)
++%:
+ @echo "$($(varname))"
git://git.onelab.eu / build.git / blobdiff