#
-# Thierry Parmentelat - INRIA Sophia Antipolis
+# Thierry Parmentelat - INRIA Sophia Antipolis
#
####################
# invocation:
# (*) as of nov. 2007, myplc-devel is deprecated
# (*) instead, we create a fresh vserver that holds required tools (see e.g. planetlab-devel.lst)
# (*) the build uses the current fedora version as a target for the produced images
-# (*) so you simply need to create a fedora 8 build image for building fedora-8 images
-#
+# (*) so you simply need to create a fedora 8 build image for building fedora-8 images
+#
#################### (planetlab) distributions
#
# (*) see README-pldistros.txt
-# (*) then you need to run
+# (*) then you need to run
# make stage1=true PLDISTRO=onelab
#
-####################
+####################
# This build deals with 3 kinds of objects
-#
+#
# (*) packages are named upon the RPM name; they are mostly lowercase
# Add a package to ALL if you want it built as part of the default set.
-# (*) modules are named after the subversion tree; as of this writing their names
-# are mostly mixed case like MyPLC or VserverReference
-# (this is something we'll fix while moving to git)
+# (*) modules are named after the subversion or git tree; we would wish to keep
+# these names lowercase as far as possible
# (*) rpms are named in the spec files. A package typically defines several rpms;
-# rpms are used for defining DEPEND-DEVEL-RPMS. See also package.rpmnames
-#
+# rpms are used for defining LOCAL-DEVEL-RPMS. See also package.rpmnames
+#
+# in simple cases, one package uses one module (in which case using the same name sounds right)
+# but others might need several modules (e.g. image-creation packages like bootstrapfs need
+# bootstrapfs and build); in this case the FIRST ONE is used for locating the specfile
+#
#################### packages
-# basics: how to build a package - you need/may define the following variables
-#
+# basics: how to build a package - you need to define the following variables
+#
# (*) package-MODULES
-# a package needs one or several modules to build.
-# to this end, define
+# a package needs one or several modules to build; the first one is used for
+# some special purposes, like locating the specfile
# (*) package-SPEC
# the package's specfile; this is relative to the FIRST module in package-MODULES
#
# Optional:
#
-# (*) package-SPECVARS
-# space-separated list of spec variable definitions, where you can reference make variable that relate to
-# packages defined BEFORE the current one (note: you should use = - as opposed to := - to define these)
-# e.g. mydriver-SPECVARS = foo=$(kernel-rpm-release)
-# would let you use the %release from the kernel's package when rpmbuild'ing mydriver - see automatic below
# (*) package-DEPEND-PACKAGES
-# a set of *packages* that this package depends on
-# (*) package-DEPEND-DEVEL-RPMS
-# a set of *rpms* that the build will rpm-install before building <package>
+# a set of (obviously local) *packages* that this package depends on, e.g.
+# bootstrapfs-DEPEND-PACKAGES += kernel
+# this impacts the order of the build
+# (*) package-STOCK-DEVEL-RPMS
+# a set of stock rpms that this package needs at build-time
+# this can also be set in config.<distro>/devel.pkgs or config.planetlab/devel.pkgs as appropriate
+# (*) package-LOCAL-DEVEL-RPMS
+# a set of *local* rpms that the build will rpm-install before building <package>
# the build will attempt to uninstall those once the package is built, this is not fatal though
# this is intended to denote local rpms, i.e. ones that are results of our own build
-# stock rpms should be mentioned in config.planetlab/devel.pkgs
+# stock rpms should be mentioned in STOCK-DEVEL-RPMS or in devel.pkgs as described above
+# (*) package-LOCAL-DEVEL-RPMS-CRUCIAL
+# like package-LOCAL-DEVEL-RPMS but for crucial packages (like autoconf) that only need an update from our build
+# rpms in this area will *not* be uninstalled after the target is made, because that would ruin the build vm for good
# (*) package-DEPEND-FILES
# a set of files that the package depends on - and that make needs to know about
-# if this contains RPMS/yumgroups.xml, then the toplevel RPMS's index
+# if this contains RPMS/yumgroups.xml, then the toplevel RPMS's index
# is refreshed with createrepo prior to running rpmbuild
-# (*) package-EXCLUDE-DEVEL-RPMS
-# a set of *rpms* that the build will rpm-uninstall before building <package>
-# this is intended to denote stock rpms, and the build will attempt to yum-install them
-# back after the package is rebuilt
+# (*) package-SPECVARS
+# space-separated list of spec variable definitions, where you can reference make variables that
+# belong to packages defined BEFORE the current one
+# note: you should use = to define these (as opposed to :=)
+# e.g. mydriver-SPECVARS = foo=$(kernel-rpm-release)
+# would let you use the %release from the kernel's package when rpmbuild'ing mydriver
+# see automatic below
# (*) package-RPMFLAGS: Miscellaneous RPM flags
-# (*) package-RPMBUILD: If not rpmbuild - mostly used for sudo'ing rpmbuild
-# (*) package-BUILD-FROM-SRPM: set this to any non-empty value, if your package is able to produce
-# a source rpms by running 'make srpm'
+# this is passed to rpmbuild, as well as to spec2make for "exporting" various rpm variable
+# to make; beware that some features, like --with=debug or --define 'foo bar' are not
+# well handled by spec2make as of this writing, which can cause issues.
+# hopefully this will be fixed...
+# (*) package-BUILD-FROM-SRPM: set this to any non-empty value,
+# if your package is able to produce a source rpm.
+# In this case the build will first invoke 'make srpm', and then rebuild binaries from that
# (*) package-RPMDATE: set this to any non-empty value to get the rpm package's release field hold the current date
# this is useful for container packages, like e.g. bootstrapfs or vserver, that contains much more than the
# correspondng module
#
# (*) module-SVNPATH
# for svn modules
-# the complete path where this module lies;
+# the complete path where this module lies;
# you can specify the trunk or a given tag with this variable
-#
+#
# (*) module-GITPATH
# for git modules
# which by analogy with svn revision scheme, is expected to be <url>@<tag>
#################### automatic variables
#
# the build defines some make variables that are extracted from spec files
-# see for example
+# to inspect those, see for example
# (*) $ make ulogd-pkginfo
# to see the list f variables attached to a given package
# (*) $ make kernel-devel-rpminfo
####################
# exported to spec files as plrelease
-PLANETLAB_RELEASE = 5.0
+PLANETLAB_RELEASE = 5.2
#
# Default values
#
-# minimal compat with macos, just so this does not complain
-HOSTARCH := $(shell uname -i 2> /dev/null || uname -m 2> /dev/null)
+# minimal compat with macos, just so this does not complain
+HOSTARCH := $(shell arch)
DISTRO := $(shell ./getdistro.sh)
RELEASE := $(shell ./getrelease.sh)
DISTRONAME := $(shell ./getdistroname.sh)
-RPM-INSTALL-DEVEL := rpm --force -Uvh
-# uninstall -- cannot force rpm -e
-# need to ignore result, kernel-headers cannot be uninstalled as glibc depends on it
-RPM-UNINSTALL-DEVEL := rpm -e
-YUM-INSTALL-DEVEL := yum -y install
#################### Makefile
# Default target
PLDISTRO := planetlab
RPMBUILD := rpmbuild
-########## savedpldistro.mk holds PLDISTRO - it is generated at stage1 (see below)
+########## envfrompreviousrun.mk holds PLDISTRO and others - it is generated at stage1 (see below)
ifeq "$(stage1)" ""
-include savedpldistro.mk
+include envfrompreviousrun.mk
endif
# when re-running the nightly build after failure, we need to gather the former values
# do this by running make stage1=skip +PLDISTRO
ifeq "$(stage1)" "skip"
-include savedpldistro.mk
+include envfrompreviousrun.mk
endif
#################### include onelab.mk
include $(PLDISTROTAGS)
# this used to be set in the -tags.mk files, but that turned out to require
-# error-prone duplicate changes
+# error-prone duplicate changes
# so now the nightly build script sets this to what it is currently using
-# in case we run this manually, i.e. if neither build-SVNPATH nor build-GITPATH is set
-ifeq "$(build-SVNPATH)$(build-GITPATH)" ""
-build-GITPATH-local := $(shell git config remote.origin.url)
-ifneq "$(build-GITPATH-local)" ""
-build-GITPATH := $(build-GITPATH-local)
-else
-build-SVNPATH := $(lastword $(shell svn info 2> /dev/null | grep URL:))
-endif
+# in case we run this manually, i.e. if build-GITPATH is not set
+ifeq "$(build-GITPATH)" ""
+build-GITPATH := $(shell git config remote.origin.url)
endif
#################### pldistros that are defined remotely
svn export $$($(1).config.SVNPATH) config.$(1)
endef
-FOO=@
# fetching with git
define remote_pldistro_fetch_git
$(1).config.GITPATH := $(shell grep -v "^#" config.$(1).gitpath)
$(eval $(call remote_pldistro_fetch_$(3),$(1)))
endef
-$(eval $(call remote_pldistro,wextoolbox,wextoolbox-tags,git))
-
########## stage1 and stage1iter
-# extract specs and compute .mk files by running
+# extract specs and compute .mk files by running
# make stage1=true
# entering stage1, we compute all the spec files
-# then we use stage1iter to compute the .mk iteratively,
+# then we use stage1iter to compute the .mk iteratively,
# ensuring that the n-1 first makefiles are loaded when creating the n-th one
# when stage1iter is set, it is supposed to be an index (starting at 1) in $(ALL)
#all : modules
#all : rpms
#all : srpms
-# mention $(ALL) here rather than rpms
+# mention $(ALL) here rather than rpms
# this is because the inter-package dependencies are expressed like
# util-vserver: util-python
all: rpms
endif
### yumgroups.xml : compute from all known .pkgs files
-RPMS/yumgroups.xml:
+RPMS/yumgroups.xml:
mkdir -p RPMS
./yumgroups.sh $(PLDISTRO) > $@
-createrepo = createrepo --quiet -g yumgroups.xml RPMS/
+createrepo = createrepo --quiet -g yumgroups.xml RPMS/
repo: RPMS/yumgroups.xml
$(createrepo)
.PHONY: repo
####################
-# notes:
+# notes:
# * we always use the first module's location (SVNPATH/GITPATH) to extract the spec file
# * no matter what SCM is used, SPEC should hold a relative path from the module's root
#
$(1).specpath := SPECS/$(notdir $($(1)-SPEC))
$(1).moduledir := MODULES/$$($(1).module)
$(1).codespec := MODULES/$$($(1).module)/$($(1)-SPEC)
+$(1).spec2makeflags := $(if $($(1)-WHITELIST-RPMS),--whitelist-rpms $($(1)-WHITELIST-RPMS),)
endef
$(foreach package, $(ALL), $(eval $(call stage1_package_vars,$(package))))
define stage1_module_vars
ifneq "$($(1)-SVNPATH)" ""
$(1)-SVNPATH := $(strip $($(1)-SVNPATH))
+$(1)-SCMPATH := $(strip $($(1)-SVNPATH))
else
-$(1)-GITPATH := $(strip $($(1)-GITPATH))
-$(1).gitrepo := $(firstword $(subst @, ,$($(1)-GITPATH)))
-$(1).gittag := $(word 2,$(subst @, ,$($(1)-GITPATH)))
-$(1).gittag := $(if $($(1).gittag),$($(1).gittag),master)
+$(1)-GITPATH := $$(strip $$($(1)-GITPATH))
+$(1)-SCMPATH := $$(strip $$($(1)-GITPATH))
+$(1).gitrepo := $$(firstword $$(subst @, ,$$($(1)-GITPATH)))
+$(1).gittag := $$(word 2,$$(subst @, ,$$($(1)-GITPATH)))
+$(1).gittag := $$(if $$($(1).gittag),$$($(1).gittag),master)
endif
endef
$(foreach module,$(ALL.modules), $(eval $(call stage1_module_vars,$(module))))
#
-# for each package, compute whether we need to set date
+# for each package, compute whether we need to set date
# the heuristic is that we mention the date as part of the rpm release flag if
# (*) the package has requested it by setting package-RPMDATE (container packages should do that)
-# (*) or SVNPATH contains 'trunk' or 'branches'
-# (*) or GITPATH has no '@' (trunk)
+# (*) or SVNPATH contains 'trunk' or 'branches'
+# (*) or GITPATH has no '@' (trunk)
# (*) or GITPATH contains a '@', and the gittag part has no '-' (this is to tell a tag from a branch..)
-#
+#
define package_hasdate
$(1).has-date = $(if $($(1)-RPMDATE),yes, \
$(if $($($(1).module)-SVNPATH), \
### the common header for generated specfiles
# useful when trying new specfiles manually
+###
+# note for fedora23 (and onwards, probably)
+# many rpms wouldn't build as-is and issue an weird error
+##
+# Processing files: pl_sshd-debuginfo-1.0-11.lxc.x86_64
+# error: Empty %files file /longbuildroot/BUILD/pl_sshd-1.0/debugfiles.list
+##
+# so to work around that we define debug_package as being nil
+# only for f23 for now, let's see what this gives us..
header.spec:
- (echo -n "# Generated by planetlab build from $($(1)-SPEC) on " ; date) > $@
+ (echo -n "# Generated by planetlab build on " ; date) > $@
echo "%define distro $(DISTRO)" >> $@
echo "%define distrorelease $(RELEASE)" >> $@
echo "%define distroname $(DISTRONAME)" >> $@
echo "%global _source_filedigest_algorithm 1" >> $@
echo "%global _source_payload w9.gzdio" >> $@
echo "%global _binary_payload w9.gzdio" >> $@
+ echo "%define debug_package %{nil}" >> $@
### make up spec file - extract module first
define target_spec
$($(1).specpath): header.spec $($(1).codespec)
mkdir -p SPECS
cat header.spec > $($(1).specpath)
+ echo "%define SCMURL $($($(1).module)-SCMPATH)" >> $($(1).specpath)
$(if $($(1).has-date),echo "%define date $(shell date +%Y.%m.%d)" >> $($(1).specpath),)
$(if $($(1)-SPECVARS), \
$(foreach line,$($(1)-SPECVARS), \
$(foreach package,$(ALL),$(eval $(call target_spec,$(package))))
+####################
+# fetch modules
+# expected input:
+# $(1) is the name of a git module
+# $($(1).gitrepo) and $(($1).gittag) are used to determine branch or tag name
+# expected result
+# $(1)/ in the cwd will hold the result
+
+# fetch svn module
+define fetch_svn_module
+ svn export $($(1)-SVNPATH) $(1)
+endef
+
+# git_fetch_module
+# as far as possible we use git-archive to fetch a git module
+# however if that fails we fallback to a git-clone strategy,
+# for when git-archive is not supported, e.g. for github
+# side effect
+# $(1)/ gets cleaned up if job cannot be done
+define fetch_git_module
+ mkdir $(1) ; \
+ ( git clone $($(1).gitrepo) $(1); cd $(1) ; git checkout $($(1).gittag) ; rm -rf .git ) || \
+ { rm -rf $(1); false; }
+endef
+
### module extraction
define target_extract_module
MODULES/$(1):
@(echo -n "XXXXXXXXXXXXXXX -- BEG MODULE $(1) : $@ " ; date)
mkdir -p MODULES
cd MODULES && \
- $(if $($(1)-SVNPATH),\
- svn export $($(1)-SVNPATH) $(1),\
- mkdir $(1) ; (git archive --remote=$($(1).gitrepo) $($(1).gittag) | tar -C $(1) -xf - ) \
- || { rm -rf $(1); false; } )
+ $(if $($(1)-SVNPATH),$(call fetch_svn_module,$(1)),$(call fetch_git_module,$(1)) )
@(echo -n "XXXXXXXXXXXXXXX -- END MODULE $(1) : $@ " ; date)
$(1)-module: MODULES/$(1)
$(foreach module,$(ALL.modules),$(eval $(call target_extract_module,$(module))))
### the tests area
-# use this makefile to extract tests rather than extracting manually in vbuild-nightly
+build-clean:
+ rm -rf MODULES/build
+.PHONY: build-clean
+
tests-clean:
rm -rf MODULES/tests
.PHONY: tests-clean
else
export HOME := $(PWD)
endif
+
+# rpm macros
+# build.common (getrpmmacros.sh) defines some utilities we want in place on our images
+# in addition to these we set a few others for the build
.rpmmacros:
ifeq "$(shell pwd)" "/build"
rm -f $(FAKEROOT) ; ln -s $(REALROOT) $(FAKEROOT)
endif
- rm -f $@
+ rm -f $@
echo "%_topdir $(HOME)" >> $@
echo "%_tmppath $(HOME)/tmp" >> $@
echo "%__spec_install_pre %{___build_pre}" >> $@
### this utility allows to extract various info from a spec file
### and to define them in makefiles
-spec2make: spec2make.c
- $(CC) -g -Wall $< -o $@ -lrpm -lrpmbuild -lrpmio -lpopt
+# use the C code where it works as it's the original one, use the python code otherwise
+spec2make: spec2make.py
+ ln -s spec2make.py $@
### run spec2make on the spec file and include the result
# usage: spec2make package
+# with old rpms (f8&c5) and too recent specfiles (the kernel), we need a patch to spec2make
+# so when <package-NEEDSPECK2MAKEHACK is set, we run spec2make with the --hack flag
define target_mk
MAKE/$(1).mk: $($(1).specpath) spec2make .rpmmacros
mkdir -p MAKE
- ./spec2make $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk || { rm MAKE/$(1).mk; exit 1; }
+ ./spec2make $($(1).spec2makeflags) $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk || { rm MAKE/$(1).mk; exit 1; }
endef
$(foreach package,$(ALL),$(eval $(call target_mk,$(package))))
-# stores PLDISTRO in a file
-# this is done at stage1. later run wont get confused
-SAVED_VARS=PLDISTRO PLDISTROTAGS build-SVNPATH PERSONALITY MAILTO BASE WEBPATH TESTBUILDURL WEBROOT
-savedpldistro.mk:
+# stores env variables in a file
+# this is done at stage1. later run won't get confused
+STATIC_VARS=PLDISTRO PLDISTROTAGS build-GITPATH PERSONALITY MAILTO BASE WEBPATH TESTBUILDURL WEBROOT
+# find out names for variables set on the command line
+define assigned_varname
+$(if $(findstring =,$(1)),$(firstword $(subst =, ,$(1))) )
+endef
+ASSIGNED=$(filter-out stage1 stage1iter,$(foreach flag,$(MAKEFLAGS),$(call assigned_varname,$(flag))))
+SAVED_VARS=$(sort $(STATIC_VARS) $(ASSIGNED))
+envfrompreviousrun.mk:
@echo "# do not edit" > $@
@$(foreach var,$(SAVED_VARS),echo "$(var):=$($(var))" >> $@ ;)
@echo "# do not edit" > aliases
@echo "\"" >> aliases
@echo "alias m1=\"m stage1=true\"" >> aliases
-savedpldistro: savedpldistro.mk
-.PHONY: savedpldistro
+envfrompreviousrun: envfrompreviousrun.mk
+.PHONY: envfrompreviousrun
# always refresh this
-all: savedpldistro
+all: envfrompreviousrun
#################### regular make
define stage2_variables
### devel dependencies
-$(1).rpmbuild = $(if $($(1)-RPMBUILD),$($(1)-RPMBUILD),$(RPMBUILD)) $($(1)-RPMFLAGS)
-$(1).all-devel-rpm-paths := $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).rpm-path))
-$(1).depend-devel-packages := $(sort $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).package)))
-ALL-DEVEL-RPMS += $($(1)-DEPEND-DEVEL-RPMS)
+$(1).rpmbuild = $(RPMBUILD) $($(1)-RPMFLAGS)
+$(1).all-local-devel-rpm-paths := $(foreach rpm,$($(1)-LOCAL-DEVEL-RPMS) $($(1)-LOCAL-DEVEL-RPMS-CRUCIAL),$($(rpm).rpm-path))
+$(1).depend-devel-packages := $(sort $(foreach rpm,$($(1)-LOCAL-DEVEL-RPMS),$($(rpm).package)))
+ALL-STOCK-DEVEL-RPMS += $($(1)-LOCAL-DEVEL-RPMS)
endef
$(foreach package,$(ALL),$(eval $(call stage2_variables,$(package))))
-ALL-DEVEL-RPMS := $(sort $(ALL-DEVEL-RPMS))
+ALL-STOCK-DEVEL-RPMS := $(sort $(ALL-STOCK-DEVEL-RPMS))
### pack sources into tarballs
@echo $(words $(ALLTARBALLS)) source tarballs OK
.PHONY: tarballs
+SOURCES/%.tar.xz: SOURCES/%
+ tar chpJf $@ -C SOURCES $*
+
SOURCES/%.tar.bz2: SOURCES/%
tar chpjf $@ -C SOURCES $*
##
URLS/%: url=$(subst @colon@,:,$(subst @slash@,/,$(notdir $@)))
URLS/%: basename=$(notdir $(url))
-URLS/%:
+URLS/%:
echo curl $(url) -o SOURCES/$(basename)
touch $@
-### the directory SOURCES/<package>-<version> is made
+### the directory SOURCES/<package>-<version> is made
# with a (set of) copy -rl from MODULES/<module>
-# the former is $(package.source)
+# the former is $(package.source)
ALLSOURCES:=$(foreach package, $(ALL), $($(package).source))
# so that make does not use the rule below directly for creating the tarball files
.SECONDARY: $(ALLSOURCES)
@echo $(words $(ALLSRPMS)) source rpms OK
.PHONY: srpms
-### these macro handles the DEPEND-DEVEL-RPMS and EXCLUDE-DEVEL-RPMS tags for a hiven package
-# before building : rpm-install DEPEND-DEVEL-RPMS and rpm-uninstall EXCLUDE
-define handle_devel_rpms_pre
- $(if $($(1).all-devel-rpm-paths), echo "Installing for $(1)-DEPEND-DEVEL-RPMS" ; $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
- $(if $($(1)-EXCLUDE-DEVEL-RPMS), echo "Uninstalling for $(1)-EXCLUDE-DEVEL-RPMS" ; $(RPM-UNINSTALL-DEVEL) $($(1)-EXCLUDE-DEVEL-RPMS))
+#################### manage build requirements
+# default values
+RPMYUM-INSTALL-LOCAL := rpm --force -Uvh
+RPMYUM-INSTALL-STOCK := yum -y install
+# uninstall -- cannot force rpm -e
+# need to ignore result, kernel-headers cannot be uninstalled as glibc depends on it
+RPMYUM-UNINSTALL-STOCK := rpm -e
+
+### these macro handles the LOCAL-DEVEL-RPMS and LOCAL-DEVEL-RPMS-CRUCIAL tags for a given package
+# before building : rpm-install LOCAL-DEVEL-RPMS
+define rpmyum_install_local_rpms
+ $(if $($(1).all-local-devel-rpm-paths), echo "Installing for $(1)-LOCAL-DEVEL-RPMS" ; $(RPMYUM-INSTALL-LOCAL) $($(1).all-local-devel-rpm-paths))
+endef
+
+# install stock rpms if defined
+define rpmyum_install_stock_rpms
+ $(if $($(1)-STOCK-DEVEL-RPMS), echo "Installing for $(1)-STOCK-DEVEL-RPMS" ; $(RPMYUM-INSTALL-STOCK) $($(1)-STOCK-DEVEL-RPMS) || true)
+endef
+
+define rpmyum_uninstall_stock_rpms
+ -$(if $($(1)-STOCK-DEVEL-RPMS), echo "Unstalling for $(1)-STOCK-DEVEL-RPMS" ; $(RPMYUM-UNINSTALL-STOCK) $($(1)-STOCK-DEVEL-RPMS) || true)
+endef
+
+# similar for debians
+# gdebi acts like yum localinstall; gdebi-core should be mentioned in develdeb.pkgs
+DPKGAPT-INSTALL-LOCAL := gdebi
+DPKGAPT-INSTALL-STOCK := apt-get -y install
+DPKGAPT-UNINSTALL-STOCK := echo WARNING uninstalling stock debs not implemented
+
+define dpkgapt_install_local_debs
+ $(if $($(1)-LOCAL-DEVEL-DEBS), echo "Installing for $(1)-LOCAL-DEVEL-DEBS" ; $(foreach debname,$($(1)-LOCAL-DEVEL-DEBS),$(DPKGAPT-INSTALL-LOCAL) $(wildcard DEBIAN/$(debname)_*.deb);))
+endef
+
+define dpkgapt_install_stock_debs
+ $(if $($(1)-STOCK-DEVEL-DEBS), echo "Installing for $(1)-STOCK-DEVEL-DEBS" ; $(DPKGAPT-INSTALL-STOCK) $($(1)-STOCK-DEVEL-DEBS) || true)
endef
-define handle_devel_rpms_post
- -$(if $($(1)-DEPEND-DEVEL-RPMS), echo "Unstalling for $(1)-DEPEND-DEVEL-RPMS" ; $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
- $(if $($(1)-EXCLUDE-DEVEL-RPMS), "Reinstalling for $(1)-EXCLUDE-DEVEL-RPMS" ; $(YUM-INSTALL-DEVEL) $($(1)-EXCLUDE-DEVEL-RPMS) )
+define dpkgapt_uninstall_stock_debs
+ -$(if $($(1)-STOCK-DEVEL-DEBS), echo "Unstalling for $(1)-STOCK-DEVEL-DEBS" ; $(DPKGAPT-UNINSTALL-STOCK) $($(1)-STOCK-DEVEL-DEBS) || true)
endef
+
+####################
# usage: target_source_rpm package
-define target_source_rpm
+define target_source_rpm
ifeq "$($(1)-BUILD-FROM-SRPM)" ""
-$($(1).srpm): $($(1).specpath) .rpmmacros $($(1).tarballs)
+$($(1).srpm): $($(1).specpath) .rpmmacros $($(1).tarballs)
mkdir -p BUILD SRPMS tmp
@(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using SOURCES) " ; date)
- $(call handle_devel_rpms_pre,$(1))
+ $(call rpmyum_install_stock_rpms,$(1))
+ $(call rpmyum_install_local_rpms,$(1))
$($(1).rpmbuild) -bs $($(1).specpath)
- $(call handle_devel_rpms_post,$(1))
+ $(call rpmyum_uninstall_stock_rpms,$(1))
@(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
else
$($(1).srpm): $($(1).specpath) .rpmmacros $($(1).source)
mkdir -p BUILD SRPMS tmp
@(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using make srpm) " ; date)
- $(call handle_devel_rpms_pre,$(1))
+ $(call rpmyum_install_stock_rpms,$(1))
+ $(call rpmyum_install_local_rpms,$(1))
make -C $($(1).source) srpm SPECFILE=$(HOME)/$($(1).specpath) EXPECTED_SRPM=$(notdir $($(1).srpm)) && \
rm -f SRPMS/$(notdir $($(1).srpm)) && \
- ln $($(1).source)/$(notdir $($(1).srpm)) SRPMS/$(notdir $($(1).srpm))
- $(call handle_devel_rpms_post,$(1))
+ ln $($(1).source)/$(notdir $($(1).srpm)) SRPMS/$(notdir $($(1).srpm))
+ $(call rpmyum_uninstall_stock_rpms,$(1))
@(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
endif
endef
@echo $(words $(ALLRPMS)) binary rpms OK
.PHONY: rpms
-# use tmp dirs when building binary rpm so make remains idempotent
+# use tmp dirs when building binary rpm so make remains idempotent
# otherwise SOURCES/ or SPEC gets touched again - which leads to rebuilding
RPM-USE-TMP-DIRS = --define "_sourcedir $(HOME)/tmp" --define "_specdir $(HOME)/tmp"
RPM-USE-COMPILE-DIRS = --define "_sourcedir $(HOME)/COMPILE" --define "_specdir $(HOME)/COMPILE"
# usage: build_binary_rpm package
# xxx hacky - invoke createrepo if DEPEND-FILES mentions RPMS/yumgroups.xml
-define target_binary_rpm
+define target_binary_rpm
$($(1).rpms): $($(1).srpm)
mkdir -p RPMS tmp
@(echo -n "XXXXXXXXXXXXXXX -- BEG RPM $(1) " ; date)
$(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
- $(call handle_devel_rpms_pre,$(1))
+ $(call rpmyum_install_stock_rpms,$(1))
+ $(call rpmyum_install_local_rpms,$(1))
$($(1).rpmbuild) --rebuild $(RPM-USE-TMP-DIRS) $($(1).srpm)
- $(call handle_devel_rpms_post,$(1))
+ $(call rpmyum_uninstall_stock_rpms,$(1))
@(echo -n "XXXXXXXXXXXXXXX -- END RPM $(1) " ; date)
# for manual use only - in case we need to investigate the results of an rpmbuild
$(1)-compile: $($(1).srpm)
mkdir -p COMPILE tmp
@(echo -n "XXXXXXXXXXXXXXX -- BEG compile $(1) " ; date)
$(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
- $(call handle_devel_rpms_pre,$(1))
+ $(call rpmyum_install_stock_rpms,$(1))
+ $(call rpmyum_install_local_rpms,$(1))
$($(1).rpmbuild) --recompile $(RPM-USE-TMP-DIRS) $($(1).srpm)
- $(call handle_devel_rpms_post,$(1))
+ $(call rpmyum_uninstall_stock_rpms,$(1))
@(echo -n "XXXXXXXXXXXXXXX -- END compile $(1) " ; date)
.PHONY: $(1)-compile
endef
### shorthand target
# e.g. make proper -> does propers rpms
# usage shorthand_target package
-define target_shorthand
+define target_shorthand
$(1): $($(1).rpms)
.PHONY: $(1)
$(1)-spec: $($(1)-SPEC)
$(foreach package,$(ALL),$(eval $(call target_depends,$(package))))
+####################
+# debian meta-target
+ALL-DEBIAN := $(foreach target,$(ALL),$(target)-debian)
+debian: $(ALL-DEBIAN)
+
+####################
+# very rough for now (one module per package), targets only sfa for now
+# the general idea here is, changing the specfile (for version number and all) is enough, and this
+# gets passed to "make debian" in the module
+# PREFIX: at one point we had passed PREFIX=/usr to this 'make debian'
+# however it turned out we could manage this some other way (see manifold)
+# so I'm reverting to simplicity
+define target_debian
+$(1)-debian: $(1)-tarball
+ $(call dpkgapt_install_local_debs,$(1))
+ $(call dpkgapt_install_stock_debs,$(1))
+ mkdir -p DEBIAN/$(1)
+ rsync -a MODULES/$($(1).module)/ DEBIAN/$(1)/
+ make -C DEBIAN/$(1) "RPMTARBALL=$(HOME)/$($(1).tarballs)" "RPMVERSION=$($(1).rpm-version)" "RPMRELEASE=$($(1).rpm-release)" "RPMNAME=$($(1).rpm-name)" debian
+ $(call dpkgapt_uninstall_stock_debs,$(1))
+endef
+
+$(foreach package,$(ALL),$(eval $(call target_debian,$(package))))
+
### clean target
# usage: target_clean package
define target_clean
rm -rf $($(1).srpm)
.PHONY: $(1)-clean-srpm
CLEANS += $(1)-clean-srpm
-$(1)-codeclean: $(1)-clean-source $(1)-clean-tarball $(1)-clean-build $(1)-clean-rpms $(1)-clean-srpm
+$(1)-clean-debian:
+ rm -rf DEBIAN/$(1)
+.PHONY: $(1)-clean-srpm
+CLEANS += $(1)-clean-srpm
+$(1)-codeclean: $(1)-clean-source $(1)-clean-tarball $(1)-clean-build $(1)-clean-rpms $(1)-clean-srpm $(1)-clean-debian
$(1)-clean: $(1)-clean-modules $(1)-codeclean
-.PHONY: $(1)-codeclean $(1)-clean
+.PHONY: $(1)-codeclean $(1)-clean
$(1)-clean-spec:
rm -rf $($(1).specpath)
.PHONY: $(1)-clean-spec
### brute force clean
distclean1:
- rm -rf savedpldistro.mk .rpmmacros spec2make header.spec SPECS MAKE $(DISTCLEANS)
+ rm -rf envfrompreviousrun.mk .rpmmacros spec2make header.spec SPECS MAKE $(DISTCLEANS)
distclean2:
- rm -rf MODULES SOURCES BUILD BUILDROOT RPMS SRPMS tmp
+ rm -rf MODULES SOURCES BUILD BUILDROOT RPMS SRPMS DEBIAN tmp
distclean: distclean1 distclean2
.PHONY: distclean1 distclean2 distclean
develclean:
- -$(RPM-UNINSTALL-DEVEL) $(ALL-DEVEL-RPMS)
+ -$(RPMYUM-UNINSTALL-STOCK) $(ALL-STOCK-DEVEL-RPMS)
####################
# gather build information for the 'About' page
@echo "Build target-arch: $(HOSTARCH)"
@echo "Build target-distro: $(DISTRO)"
@echo "Build target-distroname: $(DISTRONAME)"
- @echo "Build target-release: $(RELEASE)"
- @echo "Build target-personality: $(PERSONALITY)"
+ @echo "Build target-release: $(RELEASE)"
+ @echo "Build target-personality: $(PERSONALITY)"
-####################
+####################
# for a given module
VFORMAT="%30s := %s\n"
define print_tag_target
#################### package info
PKGKEYS := tarballs source srpm rpms rpmnames rpm-release rpm-name rpm-version rpm-subversion
%-pkginfo: package=$(subst -pkginfo,,$@)
-%-pkginfo:
+%-pkginfo:
@$(foreach key,$(PKGKEYS),echo "$(package).$(key)=$($(package).$(key))";)
## rpm info
RPMKEYS := rpm-path package
%-rpminfo: rpm=$(subst -rpminfo,,$@)
-%-rpminfo:
+%-rpminfo:
@$(foreach key,$(RPMKEYS),echo "$(rpm).$(key)=$($(rpm).$(key))";)
#################### various lists - designed to run with stage1=true
module-tools:
@$(foreach module,$(ALL.modules), \
- $(if $($(module)-GITPATH), \
+ $(if $($(module)-GITPATH), \
$(if $($(module)-BRANCH), \
- echo git:$(module):$($(module)-BRANCH); , \
- echo git:$(module); ), \
+ echo $(module):$($(module)-BRANCH); , \
+ echo $(module); ), \
$(if $($(module)-BRANCH), \
echo $(module):$($(module)-BRANCH); , \
echo $(module); )))
-info: info-packages info-modules info-branches
+info: info-packages info-modules info-branches
.PHONY: info info-packages info-modules info-branches module-tools
+show-multi-modules:
+ @$(foreach package,$(ALL),$(if $(subst x1,,x$(words $($(package)-MODULES))), echo p=$(package) mods=$($(package)-MODULES) ;))
+.PHONY: show-multi-modules
####################
help:
@echo "********** Run make in two stages:"
git://git.onelab.eu / build.git / blobdiff