DEFAULT_FCDISTRO=f20
DEFAULT_PLDISTRO=lxc
DEFAULT_PERSONALITY=linux64
-DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
+DEFAULT_MAILDEST="build at onelab.eu"
DEFAULT_BUILD_SCM_URL="git://git.onelab.eu/build"
+DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
# default gpg path used in signing yum repo
DEFAULT_GPGPATH="/etc/planetlab"
echo /vservers/$slice.log.txt
}
+########################################
+# workaround for broken lxc-enter-namespace
+# 1st version was relying on virsh net-dhcp-leases
+# however this was too fragile, would not work for fedora14 containers
+# WARNING: this code is duplicated in lbuild-initvm.sh
+function guest_ipv4() {
+ lxc=$1; shift
+
+ mac=$(virsh -c lxc:/// domiflist $lxc | egrep 'network|bridge' | awk '{print $5;}')
+ # sanity check
+ [ -z "$mac" ] && return 0
+ arp -en | grep "$mac" | awk '{print $1;}'
+}
+
# wrap a quick summary of suspicious stuff
# this is to focus on installation that go wrong
# use with care, a *lot* of other things can go bad as well
(echo -n "============================== $COMMAND: failure at " ; date ; \
webpublish tail --lines=1000 $WEBLOG) | \
webpublish_cp_stdin_to_file $WEBBASE.ko ||:
- if [ -n "$MAILTO" ] ; then
+ if [ -n "$MAILDEST" ] ; then
( \
echo "Subject: KO ${BASE} ${MAIL_SUBJECT}" ; \
- echo "To: $MAILTO" ; \
+ echo "To: $MAILDEST" ; \
echo "see build results at $WEBBASE_URL" ; \
echo "including full build log at $WEBBASE_URL/log.txt" ; \
echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
echo "........................................" ; \
webpublish tail --lines=1000 $WEBLOG ) | \
- sendmail $MAILTO
+ sendmail $MAILDEST
fi
exit 1
}
fi
BUILD_END=$(date +'%H:%M')
BUILD_END_S=$(date +'%s')
- if [ -n "$MAILTO" ] ; then
+ if [ -n "$MAILDEST" ] ; then
( \
echo "Subject: $short_message ${BASE} ${MAIL_SUBJECT}" ; \
- echo "To: $MAILTO" ; \
+ echo "To: $MAILDEST" ; \
echo "$PLDISTRO ($BASE) build for $FCDISTRO completed on $(date)" ; \
echo "see build results at $WEBBASE_URL" ; \
echo "including full build log at $WEBBASE_URL/log.txt" ; \
[ -n "$DO_TEST" ] && echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
[ -n "$IGNORED" ] && echo "WARNING: some tests steps failed but were ignored - see trace file" ; \
echo "BUILD TIME: begin $BUILD_BEG -- end $BUILD_END -- duration $(pretty_duration $(($BUILD_END_S-$BUILD_BEG_S)))" ; \
- ) | sendmail $MAILTO
+ ) | sendmail $MAILDEST
fi
# XXX For some reason, we haven't been getting this email for successful builds. If this sleep
# doesn't fix the problem, I'll remove it -- Sapan.
rpm -q libvirt > /dev/null
}
+# convenient for simple commands
+function run_in_build_guest () {
+ buildname=$1; shift
+ ssh -o "StrictHostKeyChecking no" root@$(guest_ipv4 $buildname) "$@"
+}
+
# run in the vm - do not manage success/failure, will be done from the root ctx
function build () {
set -x
MAKEVARS=("PLDISTRO=${PLDISTRO}" "${MAKEVARS[@]}")
MAKEVARS=("PLDISTROTAGS=${PLDISTROTAGS}" "${MAKEVARS[@]}")
MAKEVARS=("PERSONALITY=${PERSONALITY}" "${MAKEVARS[@]}")
- MAKEVARS=("MAILTO=${MAILTO}" "${MAKEVARS[@]}")
+ MAKEVARS=("MAILDEST=${MAILDEST}" "${MAKEVARS[@]}")
MAKEVARS=("WEBPATH=${WEBPATH}" "${MAKEVARS[@]}")
MAKEVARS=("TESTBUILDURL=${TESTBUILDURL}" "${MAKEVARS[@]}")
MAKEVARS=("WEBROOT=${WEBROOT}" "${MAKEVARS[@]}")
ssh -n ${testmaster_ssh} rm -rf ${testdir} ${testdir}.git
# check it out in the build
- virsh -c lxc:/// lxc-enter-namespace $BASE /bin/bash -c "make -C /build tests-module"
+ run_in_build_guest $BASE make -C /build tests-module ${MAKEVARS[@]}
# push it onto the testmaster - just the 'system' subdir is enough
rsync --verbose --archive $(rootdir $BASE)/build/MODULES/tests/system/ ${testmaster_ssh}:${BASE}
echo " -f fcdistro - defaults to $DEFAULT_FCDISTRO"
echo " -d pldistro - defaults to $DEFAULT_PLDISTRO"
echo " -p personality - defaults to $DEFAULT_PERSONALITY"
- echo " -m mailto - no default"
+ echo " -m mailto - defaults to $DEFAULT_MAILDEST"
echo " -s build_scm_url - git URL where to fetch the build module - defaults to $DEFAULT_BUILD_SCM_URL"
echo " define GIT tag or branch name appending @tagname to url"
echo " -t pldistrotags - defaults to \${PLDISTRO}-tags.mk"
-f) FCDISTRO=$2; shift 2 ;;
-d) PLDISTRO=$2; shift 2 ;;
-p) PERSONALITY=$2; shift 2 ;;
- -m) MAILTO=$2; shift 2 ;;
+ -m) MAILDEST=$2; shift 2 ;;
-s) BUILD_SCM_URL=$2; shift 2 ;;
-t) PLDISTROTAGS=$2; shift 2 ;;
-b) BASE=$2; shift 2 ;;
[ -z "$FCDISTRO" ] && FCDISTRO=$DEFAULT_FCDISTRO
[ -z "$PLDISTRO" ] && PLDISTRO=$DEFAULT_PLDISTRO
[ -z "$PERSONALITY" ] && PERSONALITY=$DEFAULT_PERSONALITY
+ [ -z "$MAILDEST" ] && MAILDEST=$(echo $DEFAULT_MAILDEST | sed -e 's, at ,@,')
[ -z "$PLDISTROTAGS" ] && PLDISTROTAGS="${PLDISTRO}-tags.mk"
[ -z "$BASE" ] && BASE="$DEFAULT_BASE"
[ -z "$WEBPATH" ] && WEBPATH="$DEFAULT_WEBPATH"
[ -z "$TESTCONFIG" ] && TESTCONFIG="$DEFAULT_TESTCONFIG"
[ -z "$TESTMASTER" ] && TESTMASTER="$DEFAULT_TESTMASTER"
- [ -n "$DRY_RUN" ] && MAILTO=""
+ [ -n "$DRY_RUN" ] && MAILDEST=""
# elaborate the extra args to be passed to run_log
for config in ${TESTCONFIG} ; do
# start in case e.g. we just rebooted
virsh -c lxc:/// start ${BASE} || :
# retrieve environment from the previous run
- FCDISTRO=$(virsh -c lxc:/// lxc-enter-namespace ${BASE} /build/getdistroname.sh)
- BUILD_SCM_URL=$(virsh -c lxc:/// lxc-enter-namespace ${BASE} /bin/bash -c "make --no-print-directory -C /build stage1=skip +build-GITPATH")
+ FCDISTRO=$(run_in_build_guest $BASE /build/getdistroname.sh)
+ BUILD_SCM_URL=$(run_in_build_guest $BASE make --no-print-directory -C /build stage1=skip +build-GITPATH)
# for efficiency, crop everything in one make run
tmp=/tmp/${BASE}-env.sh
- virsh -c lxc:/// lxc-enter-namespace ${BASE} /bin/bash -c "make --no-print-directory -C /build stage1=skip \
- ++PLDISTRO ++PLDISTROTAGS ++PERSONALITY ++MAILTO ++WEBPATH ++TESTBUILDURL ++WEBROOT" > $tmp
+ run_in_build_guest $BASE make --no-print-directory -C /build stage1=skip \
+ ++PLDISTRO ++PLDISTROTAGS ++PERSONALITY ++MAILDEST ++WEBPATH ++TESTBUILDURL ++WEBROOT > $tmp
. $tmp
rm -f $tmp
# update build
[ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
- virsh -c lxc:/// lxc-enter-namespace $BASE /bin/bash -c "cd /build; git pull; make tests-clean"
+ run_in_build_guest $BASE "(cd /build; git pull; make tests-clean)"
# make sure we refresh the tests place in case it has changed
rm -f /build/MODULES/tests
options=(${options[@]} -d $PLDISTRO -t $PLDISTROTAGS -s $BUILD_SCM_URL)
[ -n "$PERSONALITY" ] && options=(${options[@]} -p $PERSONALITY)
- [ -n "$MAILTO" ] && options=(${options[@]} -m $MAILTO)
+ [ -n "$MAILDEST" ] && options=(${options[@]} -m $MAILDEST)
[ -n "$WEBPATH" ] && options=(${options[@]} -w $WEBPATH)
[ -n "$TESTBUILDURL" ] && options=(${options[@]} -W $TESTBUILDURL)
[ -n "$WEBROOT" ] && options=(${options[@]} -r $WEBROOT)
rm -rf $tmpdir
# Extract build again - in the vm
[ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
- virsh -c lxc:/// lxc-enter-namespace $BASE /bin/bash -c "git clone $GIT_REPO /build; cd /build; git checkout $GIT_TAG"
+ run_in_build_guest $BASE "(git clone $GIT_REPO /build; cd /build; git checkout $GIT_TAG)"
fi
echo "XXXXXXXXXX $COMMAND: preparation of vm $BASE done" $(date)
cp $COMMANDPATH $(rootdir ${BASE})/build/
# invoke this command in the vm for building (-T)
- virsh -c lxc:/// lxc-enter-namespace ${BASE} /bin/bash -c "chmod +x /build/$COMMAND"
- virsh -c lxc:/// lxc-enter-namespace ${BASE} /build/$COMMAND "${options[@]}" -b "${BASE}" "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
+ run_in_build_guest $BASE chmod +x /build/$COMMAND
+ run_in_build_guest $BASE /build/$COMMAND "${options[@]}" -b "${BASE}" "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
fi
# publish to the web so run_log can find them
else
# run scanpackages so we can use apt-get on this
# (not needed on fedora b/c this is done by the regular build already)
- virsh -c lxc:/// lxc-enter-namespace $BASE /bin/bash -c "(cd /build ; dpkg-scanpackages DEBIAN/ | gzip -9c > Packages.gz)"
+ run_in_build_guest $BASE "(cd /build ; dpkg-scanpackages DEBIAN/ | gzip -9c > Packages.gz)"
webpublish mkdir -p $WEBPATH/$BASE/DEBIAN
webpublish_rsync_files $WEBPATH/$BASE/DEBIAN/ $(rootdir $BASE)/build/DEBIAN/*.deb
webpublish_rsync_files $WEBPATH/$BASE/ $(rootdir $BASE)/build/Packages.gz
git://git.onelab.eu / build.git / blobdiff