# Copyright (C) 2003-2006 The Trustees of Princeton University
# rewritten by Thierry Parmentelat - INRIA Sophia Antipolis
#
-# see doc in Makefile
+# see doc in Makefile
#
-#
-# kernel
-#
-# use a package name with srpm in it:
-# so the source rpm is created by running make srpm in the codebase
-#
-
-# rebuild kernel-3.1 on fedora14 due to instabilities of the stock kernel
-ifeq "$(DISTRONAME)" "f14"
-kernel-MODULES := linux-3
-kernel-SPEC := kernel-3.1.spec
-kernel-DEVEL-RPMS += gettext elfutils-devel
-kernel-BUILD-FROM-SRPM := yes
-ifeq "$(HOSTARCH)" "i386"
-kernel-RPMFLAGS:= --target i686 --with firmware
-else
-kernel-RPMFLAGS:= --target $(HOSTARCH) --with firmware
-endif
-kernel-SPECVARS += kernelconfig=planetlab
-KERNELS += kernel
-
-kernels: $(KERNELS)
-kernels-clean: $(foreach package,$(KERNELS),$(package)-clean)
-
-ALL += $(KERNELS)
-# this is to mark on which image a given rpm is supposed to go
-IN_BOOTCD += $(KERNELS)
-IN_SLICEIMAGE += $(KERNELS)
-IN_NODEIMAGE += $(KERNELS)
-endif
-
-#
-# NodeUpdate
-#
-nodeupdate-MODULES := nodeupdate
-nodeupdate-SPEC := NodeUpdate.spec
-ALL += nodeupdate
-IN_NODEIMAGE += nodeupdate
-
-#
-# ipod
-#
-ipod-MODULES := PingOfDeath
-ipod-SPEC := ipod.spec
-ALL += ipod
-IN_NODEIMAGE += ipod
-
-#
-# NodeManager
-#
-nodemanager-MODULES := nodemanager
-nodemanager-SPEC := NodeManager.spec
-ALL += nodemanager
-IN_NODEIMAGE += nodemanager
-
-#
-# pl_sshd
-#
-sshd-MODULES := pl_sshd
-sshd-SPEC := pl_sshd.spec
-ALL += sshd
-IN_NODEIMAGE += sshd
-
-#
-# codemux: Port 80 demux
-#
-codemux-MODULES := codemux
-codemux-SPEC := codemux.spec
-ALL += codemux
-IN_NODEIMAGE += codemux
-
-#
-# fprobe-ulog
-#
-fprobe-ulog-MODULES := fprobe-ulog
-fprobe-ulog-SPEC := fprobe-ulog.spec
-ALL += fprobe-ulog
-IN_NODEIMAGE += fprobe-ulog
-
-#
-# libvirt
-#
-libvirt-MODULES := libvirt
-libvirt-SPEC := libvirt.spec
-libvirt-BUILD-FROM-SRPM := yes
-libvirt-DEVEL-RPMS += libxml2-devel gnutls-devel device-mapper-devel yajl-devel gettext
-libvirt-DEVEL-RPMS += python-devel libcap-ng-devel libpciaccess-devel radvd numactl-devel
-libvirt-DEVEL-RPMS += xhtml1-dtds libxslt libtasn1-devel systemtap-sdt-devel iptables-ipv6 augeas
-libvirt-DEVEL-RPMS += libudev-devel
-libvirt-RPMFLAGS := --without storage-disk --without storage-iscsi --without storage-scsi \
- --without storage-fs --without storage-lvm \
- --without polkit --without sasl --without audit --with capng --with udev \
- --without netcf --without avahi --without sanlock \
- --without xen --without qemu --without hyperv --without phyp --without esx \
- --without libxl \
- --define 'packager PlanetLab'
-ALL += libvirt
-IN_NODEREPO += libvirt
-IN_NODEIMAGE += libvirt
-
-#
-# DistributedRateLimiting
-#
-#DistributedRateLimiting-MODULES := DistributedRateLimiting
-#DistributedRateLimiting-SPEC := DistributedRateLimiting.spec
-#ALL += DistributedRateLimiting
-#IN_NODEREPO += DistributedRateLimiting
-
-#
-# pf2slice
-#
-pf2slice-MODULES := pf2slice
-pf2slice-SPEC := pf2slice.spec
-ALL += pf2slice
-
-##
-## PlanetLab Mom: Cleans up your mess
-##
-#mom-MODULES := Mom
-#mom-SPEC := pl_mom.spec
-#ALL += mom
-#IN_NODEIMAGE += mom
-
-#
-# inotify-tools - local import
-# rebuild this on centos5 (not found) - see yumexclude
-#
-local_inotify_tools=false
-ifeq "$(DISTRONAME)" "centos5"
-local_inotify_tools=true
-endif
-
-ifeq "$(DISTRONAME)" "sl6"
-local_inotify_tools=true
-endif
-
-ifeq "$(local_inotify_tools)" "true"
-inotify-tools-MODULES := inotify-tools
-inotify-tools-SPEC := inotify-tools.spec
-inotify-tools-BUILD-FROM-SRPM := yes
-IN_NODEIMAGE += inotify-tools
-ALL += inotify-tools
-endif
-
-#
-# openvswitch
-#
-# openvswitch-MODULES := openvswitch
-# openvswitch-SPEC := openvswitch.spec
-# openvswitch-DEPEND-DEVEL-RPMS += kernel-devel
-# IN_NODEIMAGE += openvswitch
-# # build only on f14 as f16 has this natively
-# ifeq "$(DISTRONAME)" "$(filter $(DISTRONAME),f14)"
-# ALL += openvswitch
-# endif
-
-#
-# vsys
-#
-vsys-MODULES := vsys
-vsys-SPEC := vsys.spec
-# ocaml-docs is not needed anymore but keep it on a tmp basis as some tags may still have it
-vsys-DEVEL-RPMS += ocaml-ocamldoc ocaml-docs
-ifeq "$(local_inotify_tools)" "true"
-vsys-DEPEND-DEVEL-RPMS += inotify-tools inotify-tools-devel
-endif
-IN_NODEIMAGE += vsys
-ALL += vsys
-
-#
-# vsyssh : installed in slivers
-#
-vsyssh-MODULES := vsys
-vsyssh-SPEC := vsyssh.spec
-IN_SLICEIMAGE += vsyssh
-ALL += vsyssh
-
-#
-# vsys-scripts
-#
-vsys-scripts-MODULES := vsys-scripts
-vsys-scripts-SPEC := vsys-scripts.spec
-IN_NODEIMAGE += vsys-scripts
-ALL += vsys-scripts
#
# plcapi
#
plcapi-MODULES := plcapi
-plcapi-SPEC := PLCAPI.spec
+plcapi-SPEC := plcapi.spec
ALL += plcapi
IN_MYPLC += plcapi
#
# drupal
-#
+#
drupal-MODULES := drupal
drupal-SPEC := drupal.spec
drupal-BUILD-FROM-SRPM := yes
ALL += www-register-wizard
IN_MYPLC += www-register-wizard
-#
-# pcucontrol
-#
-pcucontrol-MODULES := pcucontrol
-pcucontrol-SPEC := pcucontrol.spec
-ALL += pcucontrol
-
-#
-# monitor
-#
-#monitor-MODULES := monitor
-#monitor-SPEC := Monitor.spec
-#monitor-DEVEL-RPMS += net-snmp net-snmp-devel
-#ALL += monitor
-#IN_NODEIMAGE += monitor
-
-#
-# PLC RT
-#
-plcrt-MODULES := PLCRT
-plcrt-SPEC := plcrt.spec
-ALL += plcrt
-
-# f12 has 0.9-1 already
-ifeq "$(DISTRONAME)" "$(filter $(DISTRONAME),f8 centos5)"
-#
-# pyopenssl
-#
-pyopenssl-MODULES := pyopenssl
-pyopenssl-SPEC := pyOpenSSL.spec
-pyopenssl-BUILD-FROM-SRPM := yes
-ALL += pyopenssl
-endif
-
-#
-# pyaspects
-#
-pyaspects-MODULES := pyaspects
-pyaspects-SPEC := pyaspects.spec
-pyaspects-BUILD-FROM-SRPM := yes
-ALL += pyaspects
-
-# sfa now uses the with statement that's not supported on python-2.4 - not even through __future__
-# In addition we now use sqlalchemy and 0.5 as per f12 is not compatible with our model
-build_sfa=true
-ifeq "$(DISTRONAME)" "$(filter $(DISTRONAME),f8 f12 centos5)"
-build_sfa=false
-endif
-
-ifeq "$(build_sfa)" "true"
-#
-# sfa - Slice Facility Architecture
-#
-sfa-MODULES := sfa
-sfa-SPEC := sfa.spec
-ALL += sfa
-
-sface-MODULES := sface
-sface-SPEC := sface.spec
-ALL += sface
-endif
-
-#
-# nodeconfig
-#
-nodeconfig-MODULES := nodeconfig
-nodeconfig-SPEC := nodeconfig.spec
-ALL += nodeconfig
-IN_MYPLC += nodeconfig
-
-#
-# bootmanager
-#
-bootmanager-MODULES := bootmanager
-bootmanager-SPEC := bootmanager.spec
-ALL += bootmanager
-IN_MYPLC += bootmanager
-
-#
-# pypcilib : used in bootcd
-#
-pypcilib-MODULES := pypcilib
-pypcilib-SPEC := pypcilib.spec
-ALL += pypcilib
-IN_BOOTCD += pypcilib
-
-#
-# pyplnet
-#
-pyplnet-MODULES := pyplnet
-pyplnet-SPEC := pyplnet.spec
-ALL += pyplnet
-IN_NODEIMAGE += pyplnet
-IN_MYPLC += pyplnet
-IN_BOOTCD += pyplnet
-
-#
-# OMF resource controller
-#
-omf-resctl-MODULES := omf
-omf-resctl-SPEC := omf-resctl.spec
-ALL += omf-resctl
-IN_SLICEIMAGE += omf-resctl
-
-#
-# OMF exp controller
-#
-omf-expctl-MODULES := omf
-omf-expctl-SPEC := omf-expctl.spec
-ALL += omf-expctl
-
-#
-# bootcd
-#
-bootcd-MODULES := bootcd build
-bootcd-SPEC := bootcd.spec
-bootcd-DEPEND-PACKAGES := $(IN_BOOTCD)
-bootcd-DEPEND-FILES := RPMS/yumgroups.xml
-bootcd-RPMDATE := yes
-ALL += bootcd
-IN_MYPLC += bootcd
-
-#
-# images for slices
-#
-sliceimage-MODULES := sliceimage build
-sliceimage-SPEC := sliceimage.spec
-sliceimage-DEPEND-PACKAGES := $(IN_SLICEIMAGE)
-sliceimage-DEPEND-FILES := RPMS/yumgroups.xml
-sliceimage-RPMDATE := yes
-ALL += sliceimage
-IN_NODEIMAGE += sliceimage
-
-#
-# lxc-specific sliceimage initialization
-#
-lxc-sliceimage-MODULES := sliceimage
-lxc-sliceimage-SPEC := lxc-sliceimage.spec
-lxc-sliceimage-RPMDATE := yes
-ALL += lxc-sliceimage
-IN_NODEIMAGE += lxc-sliceimage
-
-#
-# nodeimage
-#
-nodeimage-MODULES := nodeimage build
-nodeimage-SPEC := nodeimage.spec
-nodeimage-DEPEND-PACKAGES := $(IN_NODEIMAGE)
-nodeimage-DEPEND-FILES := RPMS/yumgroups.xml
-nodeimage-RPMDATE := yes
-ALL += nodeimage
-IN_MYPLC += nodeimage
-
-#
-# noderepo
-#
-# all rpms resulting from packages marked as being in nodeimage and sliceimage
-NODEREPO_RPMS = $(foreach package,$(IN_NODEIMAGE) $(IN_NODEREPO) $(IN_SLICEIMAGE),$($(package).rpms))
-# replace space with +++ (specvars cannot deal with spaces)
-SPACE=$(subst x, ,x)
-NODEREPO_RPMS_3PLUS = $(subst $(SPACE),+++,$(NODEREPO_RPMS))
-
-noderepo-MODULES := nodeimage
-noderepo-SPEC := noderepo.spec
-# package requires all embedded packages
-noderepo-DEPEND-PACKAGES := $(IN_NODEIMAGE) $(IN_NODEREPO) $(IN_SLICEIMAGE)
-noderepo-DEPEND-FILES := RPMS/yumgroups.xml
-#export rpm list to the specfile
-noderepo-SPECVARS = node_rpms_plus=$(NODEREPO_RPMS_3PLUS)
-noderepo-RPMDATE := yes
-ALL += noderepo
-IN_MYPLC += noderepo
-
-#
-# slicerepo
-#
-# all rpms resulting from packages marked as being in vserver
-SLICEREPO_RPMS = $(foreach package,$(IN_SLICEIMAGE),$($(package).rpms))
-# replace space with +++ (specvars cannot deal with spaces)
-SPACE=$(subst x, ,x)
-SLICEREPO_RPMS_3PLUS = $(subst $(SPACE),+++,$(SLICEREPO_RPMS))
-
-slicerepo-MODULES := nodeimage
-slicerepo-SPEC := slicerepo.spec
-# package requires all embedded packages
-slicerepo-DEPEND-PACKAGES := $(IN_SLICEIMAGE)
-slicerepo-DEPEND-FILES := RPMS/yumgroups.xml
-#export rpm list to the specfile
-slicerepo-SPECVARS = slice_rpms_plus=$(SLICEREPO_RPMS_3PLUS)
-slicerepo-RPMDATE := yes
-ALL += slicerepo
#
# MyPLC : lightweight packaging, dependencies are yum-installed in a vserver
ALL += myplc
# myplc-docs only contains docs for PLCAPI and NMAPI, but
-# we still need to pull MyPLC, as it is where the specfile lies,
+# we still need to pull MyPLC, as it is where the specfile lies,
# together with the utility script docbook2drupal.sh
myplc-docs-MODULES := myplc plcapi nodemanager monitor
myplc-docs-SPEC := myplc-docs.spec
git://git.onelab.eu / build.git / blobdiff