# -*- rpm-spec -*-
+%define mainstream_version 1.0.2
+%define module_version_varname mainstream_version
+%define taglevel 0
+
+#libvirt-RPMFLAGS := --without storage-disk --without storage-iscsi --without storage-scsi \
+# --without storage-fs --without storage-lvm \
+# --without polkit --without sasl --without audit --with capng --with udev \
+# --without netcf --without avahi --without sanlock \
+# --without xen --without qemu --without hyperv --without phyp --without esx \
+# --without libxl \
+%define _without_storage_disk true
+%define _without_storage_iscsi true
+%define _without_storage_fs true
+%define _without_storage_lvm true
+%define _without_polkit true
+%define _without_sasl true
+%define _without_audit true
+#interface requires netcf
+#%define _without_netcf true
+%define _without_avahi true
+%define _without_sanlock true
+%define _without_xen true
+%define _without_qemu true
+%define _without_hyperv true
+%define _without_phyp true
+%define _without_esx true
+%define _without_libxl true
+
# If neither fedora nor rhel was defined, try to guess them from %{dist}
%if !0%{?rhel} && !0%{?fedora}
%{expand:%(echo "%{?dist}" | \
sed -ne 's/^\.fc\?\([0-9]\+\).*/%%define fedora \1/p')}
%endif
+# Default to skipping autoreconf. Distros can change just this one line
+# (or provide a command-line override) if they backport any patches that
+# touch configure.ac or Makefile.am.
+%{!?enable_autotools:%define enable_autotools 0}
+
# A client only build will create a libvirt.so only containing
# the generic RPC driver, and test driver and no libvirtd
# Default to a full server + client build
# RHEL-5 builds are client-only for s390, ppc
%if 0%{?rhel} == 5
-%ifnarch i386 i586 i686 x86_64 ia64
-%define client_only 1
-%endif
+ %ifnarch %{ix86} x86_64 ia64
+ %define client_only 1
+ %endif
%endif
# Disable all server side drivers if client only build requested
%if %{client_only}
-%define server_drivers 0
+ %define server_drivers 0
%else
-%define server_drivers 1
+ %define server_drivers 1
%endif
+# Always build with dlopen'd modules
+%define with_driver_modules 1
# Now set the defaults for all the important features, independent
# of any particular OS
%define with_libvirtd 0%{!?_without_libvirtd:%{server_drivers}}
%define with_avahi 0%{!?_without_avahi:%{server_drivers}}
-# Then the hypervisor drivers that run on local host
+# Then the hypervisor drivers that run in libvirtd
%define with_xen 0%{!?_without_xen:%{server_drivers}}
%define with_qemu 0%{!?_without_qemu:%{server_drivers}}
-%define with_openvz 0%{!?_without_openvz:%{server_drivers}}
%define with_lxc 0%{!?_without_lxc:%{server_drivers}}
-%define with_vbox 0%{!?_without_vbox:%{server_drivers}}
%define with_uml 0%{!?_without_uml:%{server_drivers}}
%define with_libxl 0%{!?_without_libxl:%{server_drivers}}
-%define with_vmware 0%{!?_without_vmware:%{server_drivers}}
-# Then the hypervisor drivers that talk via a native remote protocol
+%define with_qemu_tcg %{with_qemu}
+# Change if we ever provide qemu-kvm binaries on non-x86 hosts
+%if 0%{?fedora} >= 18
+ %define qemu_kvm_arches %{ix86} x86_64 ppc64 s390x
+%else
+ %define qemu_kvm_arches %{ix86} x86_64
+%endif
+
+%ifarch %{qemu_kvm_arches}
+ %define with_qemu_kvm %{with_qemu}
+%else
+ %define with_qemu_kvm 0
+%endif
+
+# Then the hypervisor drivers that run outside libvirtd, in libvirt.so
+%define with_openvz 0%{!?_without_openvz:1}
+%define with_vbox 0%{!?_without_vbox:1}
+%define with_vmware 0%{!?_without_vmware:1}
%define with_phyp 0%{!?_without_phyp:1}
%define with_esx 0%{!?_without_esx:1}
%define with_hyperv 0%{!?_without_hyperv:1}
%define with_xenapi 0%{!?_without_xenapi:1}
-
-# Then the secondary host drivers
-%define with_network 0%{!?_without_network:%{server_drivers}}
-%define with_storage_fs 0%{!?_without_storage_fs:%{server_drivers}}
-%define with_storage_lvm 0%{!?_without_storage_lvm:%{server_drivers}}
-%define with_storage_iscsi 0%{!?_without_storage_iscsi:%{server_drivers}}
-%define with_storage_disk 0%{!?_without_storage_disk:%{server_drivers}}
-%define with_storage_mpath 0%{!?_without_storage_mpath:%{server_drivers}}
-%define with_numactl 0%{!?_without_numactl:%{server_drivers}}
-%define with_selinux 0%{!?_without_selinux:%{server_drivers}}
+%define with_parallels 0%{!?_without_parallels:1}
+
+# Then the secondary host drivers, which run inside libvirtd
+%define with_interface 0%{!?_without_interface:%{server_drivers}}
+%define with_network 0%{!?_without_network:%{server_drivers}}
+%define with_storage_fs 0%{!?_without_storage_fs:%{server_drivers}}
+%define with_storage_lvm 0%{!?_without_storage_lvm:%{server_drivers}}
+%define with_storage_iscsi 0%{!?_without_storage_iscsi:%{server_drivers}}
+%define with_storage_disk 0%{!?_without_storage_disk:%{server_drivers}}
+%define with_storage_mpath 0%{!?_without_storage_mpath:%{server_drivers}}
+%if 0%{?fedora} >= 16
+ %define with_storage_rbd 0%{!?_without_storage_rbd:%{server_drivers}}
+%else
+ %define with_storage_rbd 0
+%endif
+%if 0%{?fedora} >= 17
+ %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:%{server_drivers}}
+%else
+ %define with_storage_sheepdog 0
+%endif
+%define with_numactl 0%{!?_without_numactl:%{server_drivers}}
+%define with_selinux 0%{!?_without_selinux:%{server_drivers}}
# A few optional bits off by default, we enable later
%define with_polkit 0%{!?_without_polkit:0}
%define with_capng 0%{!?_without_capng:0}
+%define with_fuse 0%{!?_without_fuse:0}
%define with_netcf 0%{!?_without_netcf:0}
%define with_udev 0%{!?_without_udev:0}
%define with_hal 0%{!?_without_hal:0}
%define with_cgconfig 0%{!?_without_cgconfig:0}
%define with_sanlock 0%{!?_without_sanlock:0}
%define with_systemd 0%{!?_without_systemd:0}
+%define with_numad 0%{!?_without_numad:0}
+%define with_firewalld 0%{!?_without_firewalld:0}
+%define with_libssh2 0%{!?_without_libssh2:0}
# Non-server/HV driver defaults which are always enabled
%define with_python 0%{!?_without_python:1}
# Finally set the OS / architecture specific special cases
# Xen is available only on i386 x86_64 ia64
-%ifnarch i386 i586 i686 x86_64 ia64
-%define with_xen 0
-%define with_libxl 0
+%ifnarch %{ix86} x86_64 ia64
+ %define with_xen 0
+ %define with_libxl 0
%endif
# Numactl is not available on s390[x] and ARM
%ifarch s390 s390x %{arm}
-%define with_numactl 0
+ %define with_numactl 0
%endif
# RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor,
# VMWare, libxenserver (xenapi), libxenlight (Xen 4.1 and newer),
# or HyperV.
%if 0%{?rhel}
-%define with_openvz 0
-%define with_vbox 0
-%define with_uml 0
-%define with_phyp 0
-%define with_vmware 0
-%define with_xenapi 0
-%define with_libxl 0
-%define with_hyperv 0
+ %define with_openvz 0
+ %define with_vbox 0
+ %define with_uml 0
+ %define with_phyp 0
+ %define with_vmware 0
+ %define with_xenapi 0
+ %define with_libxl 0
+ %define with_hyperv 0
+ %define with_parallels 0
%endif
-# Although earlier Fedora has systemd, libvirt still used sysvinit
-%if 0%{?fedora} >= 17
-%define with_systemd 1
+# Fedora 17 / RHEL-7 are first where we use systemd. Although earlier
+# Fedora has systemd, libvirt still used sysvinit there.
+%if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
+ %define with_systemd 1
+%endif
+
+# Fedora 18 / RHEL-7 are first where firewalld support is enabled
+%if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
+ %define with_firewalld 1
%endif
# RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC
%if 0%{?rhel} == 5
-%ifnarch x86_64
-%define with_qemu 0
-%endif
-%define with_lxc 0
+ %define with_qemu_tcg 0
+ %ifnarch x86_64
+ %define with_qemu 0
+ %define with_qemu_kvm 0
+ %endif
+ %define with_lxc 0
%endif
# RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen
# on all archs. Other archs all have LXC available though
%if 0%{?rhel} >= 6
-%ifnarch x86_64
-%define with_qemu 0
-%endif
-%define with_xen 0
+ %define with_qemu_tcg 0
+ %ifnarch x86_64
+ %define with_qemu 0
+ %define with_qemu_kvm 0
+ %endif
+ %define with_xen 0
%endif
-# Fedora doesn't have any QEMU on ppc64 - only ppc
-%if 0%{?fedora}
-%ifarch ppc64
-%define with_qemu 0
-%endif
+# Fedora doesn't have any QEMU on ppc64 until FC16 - only ppc
+%if 0%{?fedora} && 0%{?fedora} < 16
+ %ifarch ppc64
+ %define with_qemu 0
+ %endif
%endif
-# Fedora doesn't have new enough Xen for libxl until F16
-%if 0%{?fedora} < 16
-%define with_libxl 0
+# Fedora doesn't have new enough Xen for libxl until F18
+%if 0%{?fedora} && 0%{?fedora} < 18
+ %define with_libxl 0
%endif
# PolicyKit was introduced in Fedora 8 / RHEL-6 or newer
%if 0%{?fedora} >= 8 || 0%{?rhel} >= 6
-%define with_polkit 0%{!?_without_polkit:1}
+ %define with_polkit 0%{!?_without_polkit:1}
%endif
# libcapng is used to manage capabilities in Fedora 12 / RHEL-6 or newer
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
-%define with_capng 0%{!?_without_capng:1}
+ %define with_capng 0%{!?_without_capng:1}
+%endif
+
+# fuse is used to provide virtualized /proc for LXC
+%if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
+ %define with_fuse 0%{!?_without_fuse:1}
%endif
# netcf is used to manage network interfaces in Fedora 12 / RHEL-6 or newer
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
-%define with_netcf 0%{!?_without_netcf:%{server_drivers}}
+ %define with_netcf 0%{!?_without_netcf:%{server_drivers}}
%endif
# udev is used to manage host devices in Fedora 12 / RHEL-6 or newer
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
-%define with_udev 0%{!?_without_udev:%{server_drivers}}
+ %define with_udev 0%{!?_without_udev:%{server_drivers}}
%else
-%define with_hal 0%{!?_without_hal:%{server_drivers}}
+ %define with_hal 0%{!?_without_hal:%{server_drivers}}
+%endif
+
+# interface requires netcf
+%if ! 0%{?with_netcf}
+ %define with_interface 0
%endif
# Enable yajl library for JSON mode with QEMU
%if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
-%define with_yajl 0%{!?_without_yajl:%{server_drivers}}
+ %define with_yajl 0%{!?_without_yajl:%{server_drivers}}
%endif
# Enable sanlock library for lock management with QEMU
# Sanlock is available only on i686 x86_64 for RHEL
%if 0%{?fedora} >= 16
-%define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
+ %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
%endif
%if 0%{?rhel} >= 6
-%ifnarch i386 i586 i686 x86_64
-%define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
+ %ifarch %{ix86} x86_64
+ %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
+ %endif
%endif
+
+# Enable libssh2 transport for new enough distros
+%if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
+ %define with_libssh2 0%{!?_without_libssh2:1}
%endif
# Disable some drivers when building without libvirt daemon.
# The logic is the same as in configure.ac
%if ! %{with_libvirtd}
-%define with_network 0
-%define with_qemu 0
-%define with_lxc 0
-%define with_uml 0
-%define with_hal 0
-%define with_udev 0
-%define with_storage_fs 0
-%define with_storage_lvm 0
-%define with_storage_iscsi 0
-%define with_storage_mpath 0
-%define with_storage_disk 0
-%endif
-
+ %define with_interface 0
+ %define with_network 0
+ %define with_qemu 0
+ %define with_lxc 0
+ %define with_uml 0
+ %define with_hal 0
+ %define with_udev 0
+ %define with_storage_fs 0
+ %define with_storage_lvm 0
+ %define with_storage_iscsi 0
+ %define with_storage_mpath 0
+ %define with_storage_rbd 0
+ %define with_storage_sheepdog 0
+ %define with_storage_disk 0
+%endif
+
+%if %{with_qemu} || %{with_lxc} || %{with_uml}
+ %define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}}
# Enable libpcap library
-%if %{with_qemu}
-%define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}}
-%define with_libpcap 0%{!?_without_libpcap:%{server_drivers}}
-%define with_macvtap 0%{!?_without_macvtap:%{server_drivers}}
+ %define with_libpcap 0%{!?_without_libpcap:%{server_drivers}}
+ %define with_macvtap 0%{!?_without_macvtap:%{server_drivers}}
+
+# numad is used to manage the CPU and memory placement dynamically,
+# it's not available on s390[x] and ARM.
+ %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
+ %ifnarch s390 s390x %{arm}
+ %define with_numad 0%{!?_without_numad:%{server_drivers}}
+ %endif
+ %endif
%endif
%if %{with_macvtap}
-%define with_libnl 1
+ %define with_libnl 1
%endif
%if 0%{?fedora} >= 11 || 0%{?rhel} >= 5
-%define with_audit 0%{!?_without_audit:1}
+ %define with_audit 0%{!?_without_audit:1}
%endif
%if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
-%define with_dtrace 1
+ %define with_dtrace 1
%endif
# Pull in cgroups config system
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
-%if %{with_qemu} || %{with_lxc}
-%define with_cgconfig 0%{!?_without_cgconfig:1}
+ %if %{with_qemu} || %{with_lxc}
+ %define with_cgconfig 0%{!?_without_cgconfig:1}
+ %endif
+%endif
+
+%if %{with_udev} || %{with_hal}
+ %define with_nodedev 1
+%else
+ %define with_nodedev 0
%endif
+
+%if %{with_storage_fs} || %{with_storage_mpath} || %{with_storage_iscsi} || %{with_storage_lvm} || %{with_storage_disk}
+ %define with_storage 1
+%else
+ %define with_storage 0
%endif
+
# Force QEMU to run as non-root
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
-%define qemu_user qemu
-%define qemu_group qemu
+ %define qemu_user qemu
+ %define qemu_group qemu
%else
-%define qemu_user root
-%define qemu_group root
+ %define qemu_user root
+ %define qemu_group root
%endif
# The RHEL-5 Xen package has some feature backports. This
# flag is set to enable use of those special bits on RHEL-5
%if 0%{?rhel} == 5
-%define with_rhel5 1
+ %define with_rhel5 1
%else
-%define with_rhel5 0
+ %define with_rhel5 0
%endif
+%if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
+ %define with_systemd_macros 1
+%else
+ %define with_systemd_macros 0
+%endif
+
+
Summary: Library providing a simple virtualization API
Name: libvirt
-Version: 0.9.8
-Release: 1%{?dist}%{?extra_release}
+Version: %{mainstream_version}
+Release: %{taglevel}
License: LGPLv2+
Group: Development/Libraries
-Source: http://libvirt.org/sources/libvirt-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
URL: http://libvirt.org/
-# All runtime requirements for the libvirt package (runtime requrements
-# for subpackages are listed later in those subpackages)
-
-# The client side, i.e. shared libs and virsh are in a subpackage
-Requires: %{name}-client = %{version}-%{release}
+%if %(echo %{version} | grep -o \\. | wc -l) == 3
+ %define mainturl stable_updates/
+%endif
+Source: http://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.gz
+Patch1: libcurl.patch
+Patch2: securityselinuxlabeltest.patch
-# Used by many of the drivers, so turn it on whenever the
-# daemon is present
%if %{with_libvirtd}
-# for modprobe of pci devices
-Requires: module-init-tools
-# for /sbin/ip & /sbin/tc
-Requires: iproute
-%endif
-%if %{with_network}
-Requires: dnsmasq >= 2.41
-Requires: radvd
+Requires: libvirt-daemon = %{version}-%{release}
+ %if %{with_network}
+Requires: libvirt-daemon-config-network = %{version}-%{release}
+ %endif
+ %if %{with_nwfilter}
+Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}
+ %endif
+ %if %{with_driver_modules}
+ %if %{with_libxl}
+Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
+ %endif
+ %if %{with_lxc}
+Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
+ %endif
+ %if %{with_qemu}
+Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
+ %endif
+ %if %{with_uml}
+Requires: libvirt-daemon-driver-uml = %{version}-%{release}
+ %endif
+ %if %{with_xen}
+Requires: libvirt-daemon-driver-xen = %{version}-%{release}
+ %endif
+
+Requires: libvirt-daemon-driver-interface = %{version}-%{release}
+Requires: libvirt-daemon-driver-secret = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage = %{version}-%{release}
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
+Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
+ %endif
+%endif
+Requires: libvirt-client = %{version}-%{release}
+
+# All build-time requirements. Run-time requirements are
+# listed against each sub-RPM
+%if 0%{?enable_autotools}
+BuildRequires: autoconf
+BuildRequires: automake
+BuildRequires: gettext-devel
+BuildRequires: libtool
%endif
-%if %{with_network} || %{with_nwfilter}
-Requires: iptables
-Requires: iptables-ipv6
-%endif
-%if %{with_nwfilter}
-Requires: ebtables
-%endif
-# needed for device enumeration
-%if %{with_hal}
-Requires: hal
-%endif
-%if %{with_udev}
-Requires: udev >= 145
-%endif
-%if %{with_polkit}
-%if 0%{?fedora} >= 12 || 0%{?rhel} >=6
-Requires: polkit >= 0.93
-%else
-Requires: PolicyKit >= 0.6
-%endif
-%endif
-%if %{with_storage_fs}
-Requires: nfs-utils
-# For mkfs
-Requires: util-linux-ng
-# For pool-build probing for existing pools
-BuildRequires: libblkid-devel >= 2.17
-# For glusterfs
-%if 0%{?fedora} >= 11
-Requires: glusterfs-client >= 2.0.1
-%endif
-%endif
-%if %{with_qemu}
-# From QEMU RPMs
-Requires: /usr/bin/qemu-img
-# For image compression
-Requires: gzip
-Requires: bzip2
-Requires: lzop
-Requires: xz
-%else
-%if %{with_xen}
-# From Xen RPMs
-Requires: /usr/sbin/qcow-create
-%endif
-%endif
-%if %{with_storage_lvm}
-# For LVM drivers
-Requires: lvm2
-%endif
-%if %{with_storage_iscsi}
-# For ISCSI driver
-Requires: iscsi-initiator-utils
-%endif
-%if %{with_storage_disk}
-# For disk driver
-Requires: parted
-Requires: device-mapper
-%endif
-%if %{with_storage_mpath}
-# For multipath support
-Requires: device-mapper
-%endif
-%if %{with_cgconfig}
-Requires: libcgroup
-%endif
-# For virConnectGetSysinfo
-Requires: dmidecode
-# For service management
-%if %{with_systemd}
-Requires(post): systemd-units
-Requires(post): systemd-sysv
-Requires(preun): systemd-units
-Requires(postun): systemd-units
-%endif
-
-# All build-time requirements
BuildRequires: python-devel
%if %{with_systemd}
BuildRequires: systemd-units
BuildRequires: gettext
BuildRequires: libtasn1-devel
BuildRequires: gnutls-devel
+BuildRequires: libattr-devel
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
# for augparse, optionally used in testing
BuildRequires: augeas
BuildRequires: hal-devel
%endif
%if %{with_udev}
+ %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
+BuildRequires: systemd-devel >= 185
+ %else
BuildRequires: libudev-devel >= 145
+ %endif
BuildRequires: libpciaccess-devel >= 0.10.9
%endif
%if %{with_yajl}
BuildRequires: yajl-devel
%endif
%if %{with_sanlock}
+# make sure libvirt is built with new enough sanlock on
+# distros that have it; required for on_lockfailure
+ %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
+BuildRequires: sanlock-devel >= 2.4
+ %else
BuildRequires: sanlock-devel >= 1.8
+ %endif
%endif
%if %{with_libpcap}
BuildRequires: libpcap-devel
%endif
%if %{with_libnl}
+ %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
+BuildRequires: libnl3-devel
+ %else
BuildRequires: libnl-devel
+ %endif
%endif
%if %{with_avahi}
BuildRequires: avahi-devel
BuildRequires: cyrus-sasl-devel
%endif
%if %{with_polkit}
-%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
+ %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
# Only need the binary, not -devel
BuildRequires: polkit >= 0.93
-%else
+ %else
BuildRequires: PolicyKit-devel >= 0.6
-%endif
+ %endif
%endif
%if %{with_storage_fs}
# For mount/umount in FS driver
# From QEMU RPMs
BuildRequires: /usr/bin/qemu-img
%else
-%if %{with_xen}
+ %if %{with_xen}
# From Xen RPMs
BuildRequires: /usr/sbin/qcow-create
-%endif
+ %endif
%endif
%if %{with_storage_lvm}
# For LVM drivers
%if %{with_storage_disk}
# For disk driver
BuildRequires: parted-devel
-%if 0%{?rhel} == 5
+ %if 0%{?rhel} == 5
# Broken RHEL-5 parted RPM is missing a dep
BuildRequires: e2fsprogs-devel
-%endif
+ %endif
%endif
%if %{with_storage_mpath}
# For Multipath support
-%if 0%{?rhel} == 5
+ %if 0%{?rhel} == 5
# Broken RHEL-5 packaging has header files in main RPM :-(
BuildRequires: device-mapper
-%else
+ %else
BuildRequires: device-mapper-devel
-%endif
+ %endif
+ %if %{with_storage_rbd}
+BuildRequires: ceph-devel
+ %endif
%endif
%if %{with_numactl}
# For QEMU/LXC numa info
%if %{with_capng}
BuildRequires: libcap-ng-devel >= 0.5.0
%endif
-%if %{with_phyp}
-BuildRequires: libssh2-devel
+%if %{with_fuse}
+BuildRequires: fuse-devel >= 2.8.6
%endif
+%if %{with_phyp} || %{with_libssh2}
+BuildRequires: libssh2-devel >= 1.3.0
+%endif
+
%if %{with_netcf}
-%if 0%{?fedora} >= 16 || 0%{?rhel} >= 6
+ %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
+BuildRequires: netcf-devel >= 0.2.2
+ %else
+ %if 0%{?fedora} >= 16 || 0%{?rhel} >= 6
BuildRequires: netcf-devel >= 0.1.8
-%else
+ %else
BuildRequires: netcf-devel >= 0.1.4
-%endif
+ %endif
+ %endif
%endif
%if %{with_esx}
-%if 0%{?fedora} >= 9 || 0%{?rhel} >= 6
+ %if 0%{?fedora} >= 9 || 0%{?rhel} >= 6
BuildRequires: libcurl-devel
-%else
+ %else
BuildRequires: curl-devel
-%endif
+ %endif
%endif
%if %{with_hyperv}
BuildRequires: libwsman-devel >= 2.2.3
BuildRequires: nfs-utils
%endif
+%if %{with_firewalld}
+# Communication with the firewall daemon uses DBus
+BuildRequires: dbus-devel
+%endif
+
# Fedora build root suckage
BuildRequires: gawk
+# For storage wiping with different algorithms
+BuildRequires: scrub
+
+%if %{with_numad}
+BuildRequires: numad
+%endif
+
+Provides: bundled(gnulib)
+
%description
Libvirt is a C toolkit to interact with the virtualization capabilities
of recent versions of Linux (and other OSes). The main package includes
the libvirtd server exporting the virtualization support.
+%package docs
+Summary: API reference and website documentation
+Group: Development/Libraries
+
+%description docs
+Includes the API reference for the libvirt C library, and a complete
+copy of the libvirt.org website documentation.
+
+%if %{with_libvirtd}
+%package daemon
+Summary: Server side daemon and supporting files for libvirt library
+Group: Development/Libraries
+
+# All runtime requirements for the libvirt package (runtime requrements
+# for subpackages are listed later in those subpackages)
+
+# The client side, i.e. shared libs and virsh are in a subpackage
+Requires: %{name}-client = %{version}-%{release}
+
+# for modprobe of pci devices
+Requires: module-init-tools
+# for /sbin/ip & /sbin/tc
+Requires: iproute
+ %if %{with_avahi}
+ %if 0%{?rhel} == 5
+Requires: avahi
+ %else
+Requires: avahi-libs
+ %endif
+ %endif
+ %if %{with_network}
+Requires: dnsmasq >= 2.41
+Requires: radvd
+ %endif
+ %if %{with_network} || %{with_nwfilter}
+Requires: iptables
+Requires: iptables-ipv6
+ %endif
+ %if %{with_nwfilter}
+Requires: ebtables
+ %endif
+ %if %{with_netcf} && (0%{?fedora} >= 18 || 0%{?rhel} >= 7)
+Requires: netcf-libs >= 0.2.2
+ %endif
+# needed for device enumeration
+ %if %{with_hal}
+Requires: hal
+ %endif
+ %if %{with_udev}
+ %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
+Requires: systemd >= 185
+ %else
+Requires: udev >= 145
+ %endif
+ %endif
+ %if %{with_polkit}
+ %if 0%{?fedora} >= 12 || 0%{?rhel} >=6
+Requires: polkit >= 0.93
+ %else
+Requires: PolicyKit >= 0.6
+ %endif
+ %endif
+ %if %{with_storage_fs}
+Requires: nfs-utils
+# For mkfs
+Requires: util-linux
+# For pool-build probing for existing pools
+BuildRequires: libblkid-devel >= 2.17
+# For glusterfs
+ %if 0%{?fedora} >= 11
+Requires: glusterfs-client >= 2.0.1
+ %endif
+ %endif
+ %if %{with_qemu}
+# From QEMU RPMs
+Requires: /usr/bin/qemu-img
+# For image compression
+Requires: gzip
+Requires: bzip2
+Requires: lzop
+Requires: xz
+ %else
+ %if %{with_xen}
+# From Xen RPMs
+Requires: /usr/sbin/qcow-create
+ %endif
+ %endif
+ %if %{with_storage_lvm}
+# For LVM drivers
+Requires: lvm2
+ %endif
+ %if %{with_storage_iscsi}
+# For ISCSI driver
+Requires: iscsi-initiator-utils
+ %endif
+ %if %{with_storage_disk}
+# For disk driver
+Requires: parted
+Requires: device-mapper
+ %endif
+ %if %{with_storage_mpath}
+# For multipath support
+Requires: device-mapper
+ %endif
+ %if %{with_storage_sheepdog}
+# For Sheepdog support
+Requires: sheepdog
+ %endif
+ %if %{with_cgconfig}
+Requires: libcgroup
+ %endif
+ %ifarch %{ix86} x86_64 ia64
+# For virConnectGetSysinfo
+Requires: dmidecode
+ %endif
+# For service management
+ %if %{with_systemd}
+Requires(post): systemd-units
+Requires(post): systemd-sysv
+Requires(preun): systemd-units
+Requires(postun): systemd-units
+ %endif
+ %if %{with_numad}
+Requires: numad
+ %endif
+# libvirtd depends on 'messagebus' service
+Requires: dbus
+
+%description daemon
+Server side daemon required to manage the virtualization capabilities
+of recent versions of Linux. Requires a hypervisor specific sub-RPM
+for specific drivers.
+
+ %if %{with_network}
+%package daemon-config-network
+Summary: Default configuration files for the libvirtd daemon
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-config-network
+Default configuration files for setting up NAT based networking
+ %endif
+
+ %if %{with_nwfilter}
+%package daemon-config-nwfilter
+Summary: Network filter configuration files for the libvirtd daemon
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-config-nwfilter
+Network filter configuration files for cleaning guest traffic
+ %endif
+
+ %if %{with_driver_modules}
+ %if %{with_network}
+%package daemon-driver-network
+Summary: Network driver plugin for the libvirtd daemon
+Group: Development/Libraries
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-driver-network
+The network driver plugin for the libvirtd daemon, providing
+an implementation of the virtual network APIs using the Linux
+bridge capabilities.
+ %endif
+
+
+ %if %{with_nwfilter}
+%package daemon-driver-nwfilter
+Summary: Nwfilter driver plugin for the libvirtd daemon
+Group: Development/Libraries
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-driver-nwfilter
+The nwfilter driver plugin for the libvirtd daemon, providing
+an implementation of the firewall APIs using the ebtables,
+iptables and ip6tables capabilities
+ %endif
+
+
+ %if %{with_nodedev}
+%package daemon-driver-nodedev
+Summary: Nodedev driver plugin for the libvirtd daemon
+Group: Development/Libraries
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-driver-nodedev
+The nodedev driver plugin for the libvirtd daemon, providing
+an implementation of the node device APIs using the udev
+capabilities.
+ %endif
+
+
+ %if %{with_interface}
+%package daemon-driver-interface
+Summary: Interface driver plugin for the libvirtd daemon
+Group: Development/Libraries
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-driver-interface
+The interface driver plugin for the libvirtd daemon, providing
+an implementation of the network interface APIs using the
+netcf library
+ %endif
+
+
+%package daemon-driver-secret
+Summary: Secret driver plugin for the libvirtd daemon
+Group: Development/Libraries
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-driver-secret
+The secret driver plugin for the libvirtd daemon, providing
+an implementation of the secret key APIs.
+
+
+ %if %{with_storage}
+%package daemon-driver-storage
+Summary: Storage driver plugin for the libvirtd daemon
+Group: Development/Libraries
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-driver-storage
+The storage driver plugin for the libvirtd daemon, providing
+an implementation of the storage APIs using LVM, iSCSI,
+parted and more.
+ %endif
+
+
+ %if %{with_qemu}
+%package daemon-driver-qemu
+Summary: Qemu driver plugin for the libvirtd daemon
+Group: Development/Libraries
+Requires: libvirt-daemon = %{version}-%{release}
+# There really is a hard cross-driver dependency here
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+
+%description daemon-driver-qemu
+The qemu driver plugin for the libvirtd daemon, providing
+an implementation of the hypervisor driver APIs using
+QEMU
+ %endif
+
+
+ %if %{with_lxc}
+%package daemon-driver-lxc
+Summary: LXC driver plugin for the libvirtd daemon
+Group: Development/Libraries
+Requires: libvirt-daemon = %{version}-%{release}
+# There really is a hard cross-driver dependency here
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+
+%description daemon-driver-lxc
+The LXC driver plugin for the libvirtd daemon, providing
+an implementation of the hypervisor driver APIs using
+the Linux kernel
+ %endif
+
+
+ %if %{with_uml}
+%package daemon-driver-uml
+Summary: Uml driver plugin for the libvirtd daemon
+Group: Development/Libraries
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-driver-uml
+The UML driver plugin for the libvirtd daemon, providing
+an implementation of the hypervisor driver APIs using
+User Mode Linux
+ %endif
+
+
+ %if %{with_xen}
+%package daemon-driver-xen
+Summary: Xen driver plugin for the libvirtd daemon
+Group: Development/Libraries
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-driver-xen
+The Xen driver plugin for the libvirtd daemon, providing
+an implementation of the hypervisor driver APIs using
+Xen
+ %endif
+
+
+ %if %{with_libxl}
+%package daemon-driver-libxl
+Summary: Libxl driver plugin for the libvirtd daemon
+Group: Development/Libraries
+Requires: libvirt-daemon = %{version}-%{release}
+
+%description daemon-driver-libxl
+The Libxl driver plugin for the libvirtd daemon, providing
+an implementation of the hypervisor driver APIs using
+Libxl
+ %endif
+ %endif # %{with_driver_modules}
+
+
+
+ %if %{with_qemu_tcg}
+%package daemon-qemu
+Summary: Server side daemon & driver required to run QEMU guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+ %if %{with_driver_modules}
+Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
+Requires: libvirt-daemon-driver-interface = %{version}-%{release}
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
+Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
+Requires: libvirt-daemon-driver-secret = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage = %{version}-%{release}
+ %endif
+Requires: qemu
+
+%description daemon-qemu
+Server side daemon and driver required to manage the virtualization
+capabilities of the QEMU TCG emulators
+ %endif
+
+
+ %if %{with_qemu_kvm}
+%package daemon-kvm
+Summary: Server side daemon & driver required to run KVM guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+ %if %{with_driver_modules}
+Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
+Requires: libvirt-daemon-driver-interface = %{version}-%{release}
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
+Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
+Requires: libvirt-daemon-driver-secret = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage = %{version}-%{release}
+ %endif
+Requires: qemu-kvm
+
+%description daemon-kvm
+Server side daemon and driver required to manage the virtualization
+capabilities of the KVM hypervisor
+ %endif
+
+
+ %if %{with_lxc}
+%package daemon-lxc
+Summary: Server side daemon & driver required to run LXC guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+ %if %{with_driver_modules}
+Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
+Requires: libvirt-daemon-driver-interface = %{version}-%{release}
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
+Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
+Requires: libvirt-daemon-driver-secret = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage = %{version}-%{release}
+ %endif
+
+%description daemon-lxc
+Server side daemon and driver required to manage the virtualization
+capabilities of LXC
+ %endif
+
+
+ %if %{with_uml}
+%package daemon-uml
+Summary: Server side daemon & driver required to run UML guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+ %if %{with_driver_modules}
+Requires: libvirt-daemon-driver-uml = %{version}-%{release}
+Requires: libvirt-daemon-driver-interface = %{version}-%{release}
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
+Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
+Requires: libvirt-daemon-driver-secret = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage = %{version}-%{release}
+ %endif
+# There are no UML kernel RPMs in Fedora/RHEL to depend on.
+
+%description daemon-uml
+Server side daemon and driver required to manage the virtualization
+capabilities of UML
+ %endif
+
+
+ %if %{with_xen} || %{with_libxl}
+%package daemon-xen
+Summary: Server side daemon & driver required to run XEN guests
+Group: Development/Libraries
+
+Requires: libvirt-daemon = %{version}-%{release}
+ %if %{with_driver_modules}
+ %if %{with_xen}
+Requires: libvirt-daemon-driver-xen = %{version}-%{release}
+ %endif
+ %if %{with_libxl}
+Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
+ %endif
+Requires: libvirt-daemon-driver-interface = %{version}-%{release}
+Requires: libvirt-daemon-driver-network = %{version}-%{release}
+Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
+Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
+Requires: libvirt-daemon-driver-secret = %{version}-%{release}
+Requires: libvirt-daemon-driver-storage = %{version}-%{release}
+ %endif
+Requires: xen
+
+%description daemon-xen
+Server side daemon and driver required to manage the virtualization
+capabilities of XEN
+ %endif
+%endif # %{with_libvirtd}
+
%package client
Summary: Client side library and utilities of the libvirt library
Group: Development/Libraries
Summary: Libraries, includes, etc. to compile with the libvirt library
Group: Development/Libraries
Requires: %{name}-client = %{version}-%{release}
+Requires: %{name}-docs = %{version}-%{release}
Requires: pkgconfig
-%if %{with_xen}
-Requires: xen-devel
-%endif
%description devel
-Includes and documentations for the C library providing an API to use
-the virtualization capabilities of recent versions of Linux (and other OSes).
+Include header files & development libraries for the libvirt C library.
%if %{with_sanlock}
%package lock-sanlock
Summary: Sanlock lock manager plugin for QEMU driver
Group: Development/Libraries
+ %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
+Requires: sanlock >= 2.4
+ %else
Requires: sanlock >= 1.8
+ %endif
#for virt-sanlock-cleanup require augeas
Requires: augeas
-Requires: %{name} = %{version}-%{release}
+Requires: %{name}-daemon = %{version}-%{release}
+Requires: %{name}-client = %{version}-%{release}
%description lock-sanlock
Includes the Sanlock lock manager plugin for the QEMU
%prep
%setup -q
+%patch1 -p1
+%patch2 -p1
%build
%if ! %{with_xen}
-%define _without_xen --without-xen
+ %define _without_xen --without-xen
%endif
%if ! %{with_qemu}
-%define _without_qemu --without-qemu
+ %define _without_qemu --without-qemu
%endif
%if ! %{with_openvz}
-%define _without_openvz --without-openvz
+ %define _without_openvz --without-openvz
%endif
%if ! %{with_lxc}
-%define _without_lxc --without-lxc
+ %define _without_lxc --without-lxc
%endif
%if ! %{with_vbox}
-%define _without_vbox --without-vbox
+ %define _without_vbox --without-vbox
%endif
%if ! %{with_xenapi}
-%define _without_xenapi --without-xenapi
+ %define _without_xenapi --without-xenapi
%endif
%if ! %{with_libxl}
-%define _without_libxl --without-libxl
+ %define _without_libxl --without-libxl
%endif
%if ! %{with_sasl}
-%define _without_sasl --without-sasl
+ %define _without_sasl --without-sasl
%endif
%if ! %{with_avahi}
-%define _without_avahi --without-avahi
+ %define _without_avahi --without-avahi
%endif
%if ! %{with_phyp}
-%define _without_phyp --without-phyp
+ %define _without_phyp --without-phyp
%endif
%if ! %{with_esx}
-%define _without_esx --without-esx
+ %define _without_esx --without-esx
%endif
%if ! %{with_hyperv}
-%define _without_hyperv --without-hyperv
+ %define _without_hyperv --without-hyperv
%endif
%if ! %{with_vmware}
-%define _without_vmware --without-vmware
+ %define _without_vmware --without-vmware
+%endif
+
+%if ! %{with_parallels}
+ %define _without_parallels --without-parallels
%endif
%if ! %{with_polkit}
-%define _without_polkit --without-polkit
+ %define _without_polkit --without-polkit
%endif
%if ! %{with_python}
-%define _without_python --without-python
+ %define _without_python --without-python
%endif
%if ! %{with_libvirtd}
-%define _without_libvirtd --without-libvirtd
+ %define _without_libvirtd --without-libvirtd
%endif
%if ! %{with_uml}
-%define _without_uml --without-uml
+ %define _without_uml --without-uml
%endif
%if %{with_rhel5}
-%define _with_rhel5_api --with-rhel5-api
+ %define _with_rhel5_api --with-rhel5-api
+%endif
+
+%if ! %{with_interface}
+ %define _without_interface --without-interface
%endif
%if ! %{with_network}
-%define _without_network --without-network
+ %define _without_network --without-network
%endif
%if ! %{with_storage_fs}
-%define _without_storage_fs --without-storage-fs
+ %define _without_storage_fs --without-storage-fs
%endif
%if ! %{with_storage_lvm}
-%define _without_storage_lvm --without-storage-lvm
+ %define _without_storage_lvm --without-storage-lvm
%endif
%if ! %{with_storage_iscsi}
-%define _without_storage_iscsi --without-storage-iscsi
+ %define _without_storage_iscsi --without-storage-iscsi
%endif
%if ! %{with_storage_disk}
-%define _without_storage_disk --without-storage-disk
+ %define _without_storage_disk --without-storage-disk
%endif
%if ! %{with_storage_mpath}
-%define _without_storage_mpath --without-storage-mpath
+ %define _without_storage_mpath --without-storage-mpath
+%endif
+
+%if ! %{with_storage_rbd}
+ %define _without_storage_rbd --without-storage-rbd
+%endif
+
+%if ! %{with_storage_sheepdog}
+ %define _without_storage_sheepdog --without-storage-sheepdog
%endif
%if ! %{with_numactl}
-%define _without_numactl --without-numactl
+ %define _without_numactl --without-numactl
+%endif
+
+%if ! %{with_numad}
+ %define _without_numad --without-numad
%endif
%if ! %{with_capng}
-%define _without_capng --without-capng
+ %define _without_capng --without-capng
+%endif
+
+%if ! %{with_fuse}
+ %define _without_fuse --without-fuse
%endif
%if ! %{with_netcf}
-%define _without_netcf --without-netcf
+ %define _without_netcf --without-netcf
%endif
%if ! %{with_selinux}
-%define _without_selinux --without-selinux
+ %define _without_selinux --without-selinux
%endif
%if ! %{with_hal}
-%define _without_hal --without-hal
+ %define _without_hal --without-hal
%endif
%if ! %{with_udev}
-%define _without_udev --without-udev
+ %define _without_udev --without-udev
%endif
%if ! %{with_yajl}
-%define _without_yajl --without-yajl
+ %define _without_yajl --without-yajl
%endif
%if ! %{with_sanlock}
-%define _without_sanlock --without-sanlock
+ %define _without_sanlock --without-sanlock
%endif
%if ! %{with_libpcap}
-%define _without_libpcap --without-libpcap
+ %define _without_libpcap --without-libpcap
%endif
%if ! %{with_macvtap}
-%define _without_macvtap --without-macvtap
+ %define _without_macvtap --without-macvtap
%endif
%if ! %{with_audit}
-%define _without_audit --without-audit
+ %define _without_audit --without-audit
%endif
%if ! %{with_dtrace}
-%define _without_dtrace --without-dtrace
+ %define _without_dtrace --without-dtrace
+%endif
+
+%if ! %{with_driver_modules}
+ %define _without_driver_modules --without-driver-modules
+%endif
+
+%if %{with_firewalld}
+ %define _with_firewalld --with-firewalld
%endif
%define when %(date +"%%F-%%T")
%define with_packager_version --with-packager-version="%{release}"
%if %{with_systemd}
-# We use 'systemd+redhat', so if someone installs upstart or
-# legacy init scripts, they can still start libvirtd, etc
-%define init_scripts --with-init_script=systemd+redhat
+ %define init_scripts --with-init_script=systemd
%else
-%define init_scripts --with-init_script=redhat
+ %define init_scripts --with-init_script=redhat
+%endif
+
+%if 0%{?enable_autotools}
+ autoreconf -if
+%endif
+
+%if %{with_selinux}
+ %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
+ %define with_selinux_mount --with-selinux-mount="/sys/fs/selinux"
+ %else
+ %define with_selinux_mount --with-selinux-mount="/selinux"
+ %endif
%endif
%configure %{?_without_xen} \
%{?_without_openvz} \
%{?_without_lxc} \
%{?_without_vbox} \
+ %{?_without_libxl} \
%{?_without_xenapi} \
%{?_without_sasl} \
%{?_without_avahi} \
%{?_without_esx} \
%{?_without_hyperv} \
%{?_without_vmware} \
+ %{?_without_parallels} \
+ %{?_without_interface} \
%{?_without_network} \
%{?_with_rhel5_api} \
%{?_without_storage_fs} \
%{?_without_storage_iscsi} \
%{?_without_storage_disk} \
%{?_without_storage_mpath} \
+ %{?_without_storage_rbd} \
+ %{?_without_storage_sheepdog} \
%{?_without_numactl} \
+ %{?_without_numad} \
%{?_without_capng} \
+ %{?_without_fuse} \
%{?_without_netcf} \
%{?_without_selinux} \
+ %{?_with_selinux_mount} \
%{?_without_hal} \
%{?_without_udev} \
%{?_without_yajl} \
%{?_without_macvtap} \
%{?_without_audit} \
%{?_without_dtrace} \
+ %{?_without_driver_modules} \
+ %{?_with_firewalld} \
%{with_packager} \
%{with_packager_version} \
- --with-capng \
- --with-udev \
--with-qemu-user=%{qemu_user} \
--with-qemu-group=%{qemu_group} \
- %{init_scripts} \
- --with-remote-pid-file=%{_localstatedir}/run/libvirtd.pid
+ %{init_scripts}
make %{?_smp_mflags}
gzip -9 ChangeLog
%install
rm -fr %{buildroot}
-%makeinstall SYSTEMD_UNIT_DIR=%{_unitdir}
+%makeinstall SYSTEMD_UNIT_DIR=%{buildroot}%{_unitdir}
for i in domain-events/events-c dominfo domsuspend hellolibvirt openauth python xml/nwfilter systemtap
do
(cd examples/$i ; make clean ; rm -rf .deps .libs Makefile Makefile.in)
rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.a
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a
+%if %{with_driver_modules}
+rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la
+rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a
+%endif
%if %{with_network}
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/
%endif
%find_lang %{name}
+%if ! %{with_sanlock}
+rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug
+rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
+%endif
+
%if ! %{with_lxc}
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
%if ! %{with_python}
rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}
-%endif
-
-%if %{client_only}
-rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version}
-%endif
-
-%if ! %{with_libvirtd}
-rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter
-mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version}/html \
- $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-devel-%{version}/
+%else
+rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}/examples
%endif
%if ! %{with_qemu}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml
%endif
+mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} \
+ $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-docs-%{version}
+
+%if %{with_dtrace}
+ %ifarch %{power64} s390x x86_64 ia64 alpha sparc64
+mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \
+ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp
+mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \
+ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp
+ %endif
+%endif
+
+%if 0%{?fedora} < 14 && 0%{?rhel} < 6
+rm -f $RPM_BUILD_ROOT%{_prefix}/lib/sysctl.d/libvirtd.conf
+%endif
+
%clean
rm -fr %{buildroot}
%check
cd tests
-# These 3 tests don't current work in a mock build root
-for i in nodeinfotest daemon-conf seclabeltest
+make
+# These tests don't current work in a mock build root
+for i in nodeinfotest seclabeltest
do
rm -f $i
- printf "#!/bin/sh\nexit 0\n" > $i
+ printf 'int main(void) { return 0; }' > $i.c
+ printf '#!/bin/sh\nexit 0\n' > $i
chmod +x $i
done
-#make check
+make check
-%pre
-%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
+%if %{with_libvirtd}
+%pre daemon
+ %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
# Normally 'setup' adds this in /etc/passwd, but this is
# here for case of upgrades from earlier Fedora/RHEL. This
# UID/GID pair is reserved for qemu:qemu
getent passwd qemu >/dev/null || \
useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \
-c "qemu user" qemu
-%endif
+ %endif
-%post
-
-%if %{with_libvirtd}
-%if %{with_network}
-# We want to install the default network for initial RPM installs
-# or on the first upgrade from a non-network aware libvirt only.
-# We check this by looking to see if the daemon is already installed
-if ! /sbin/chkconfig libvirtd && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml
-then
- UUID=`/usr/bin/uuidgen`
- sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
- < %{_datadir}/libvirt/networks/default.xml \
- > %{_sysconfdir}/libvirt/qemu/networks/default.xml
- ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
-fi
+%post daemon
+ %if %{with_network}
# All newly defined networks will have a mac address for the bridge
# auto-generated, but networks already existing at the time of upgrade
# will not. We need to go through all the network configs, look for
fi
done
done
-%endif
+ %endif
-%if %{with_systemd}
+ %if %{with_systemd}
+ %if %{with_systemd_macros}
+ %systemd_post libvirtd.service
+ %else
if [ $1 -eq 1 ] ; then
# Initial installation
+ /bin/systemctl enable virtlockd.socket >/dev/null 2>&1 || :
/bin/systemctl enable libvirtd.service >/dev/null 2>&1 || :
- /bin/systemctl enable cgconfig.service >/dev/null 2>&1 || :
fi
-%else
-%if %{with_cgconfig}
-# Starting with Fedora 16, systemd automounts all cgroups, and cgconfig is
-# no longer a necessary service.
-%if 0%{?fedora} <= 15 || 0%{?rhel} <= 6
+ %endif
+ %else
+ %if %{with_cgconfig}
+# Starting with Fedora 16/RHEL-7, systemd automounts all cgroups,
+# and cgconfig is no longer a necessary service.
+ %if (0%{?rhel} && 0%{?rhel} < 7) || (0%{?fedora} && 0%{?fedora} < 16)
if [ "$1" -eq "1" ]; then
/sbin/chkconfig cgconfig on
fi
-%endif
-%endif
+ %endif
+ %endif
/sbin/chkconfig --add libvirtd
if [ "$1" -ge "1" ]; then
- /sbin/service libvirtd condrestart > /dev/null 2>&1
+ /sbin/service libvirtd condrestart > /dev/null 2>&1
fi
-%endif
-%endif
+ %endif
-%preun
-%if %{with_libvirtd}
-%if %{with_systemd}
+%preun daemon
+ %if %{with_systemd}
+ %if %{with_systemd_macros}
+ %systemd_preun libvirtd.service
+ %else
if [ $1 -eq 0 ] ; then
# Package removal, not upgrade
+ /bin/systemctl --no-reload disable virtlockd.socket > /dev/null 2>&1 || :
/bin/systemctl --no-reload disable libvirtd.service > /dev/null 2>&1 || :
/bin/systemctl stop libvirtd.service > /dev/null 2>&1 || :
+ /bin/systemctl stop virtlockd.service > /dev/null 2>&1 || :
fi
-%else
+ %endif
+ %else
if [ $1 = 0 ]; then
/sbin/service libvirtd stop 1>/dev/null 2>&1
/sbin/chkconfig --del libvirtd
fi
-%endif
-%endif
+ %endif
-%postun
-%if %{with_libvirtd}
-%if %{with_systemd}
+%postun daemon
+ %if %{with_systemd}
+ %if %{with_systemd_macros}
+ %systemd_postun_with_restart libvirtd.service
+ %else
/bin/systemctl daemon-reload >/dev/null 2>&1 || :
if [ $1 -ge 1 ] ; then
# Package upgrade, not uninstall
+ /bin/systemctl status virtlockd.service >/dev/null 2>&1
+ if [ $? = 1 ] ; then
+ /bin/systemctl kill --signal=USR1 virtlockd.service >/dev/null 2>&1 || :
+ fi
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
fi
-%endif
-%endif
+ %endif
+ %endif
-%if %{with_libvirtd}
-%if %{with_systemd}
+ %if %{with_network}
+%post daemon-config-network
+if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
+ UUID=`/usr/bin/uuidgen`
+ sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
+ < %{_datadir}/libvirt/networks/default.xml \
+ > %{_sysconfdir}/libvirt/qemu/networks/default.xml
+ ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
+fi
+ %endif
+
+ %if %{with_systemd}
%triggerun -- libvirt < 0.9.4
%{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||:
# Run these because the SysV package being removed won't do them
/sbin/chkconfig --del libvirtd >/dev/null 2>&1 || :
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
-%endif
-%endif
+ %endif
+%endif # %{with_libvirtd}
%preun client
%if %{with_systemd}
+ %if %{with_systemd_macros}
+ %systemd_preun libvirt-guests.service
+ %endif
%else
if [ $1 = 0 ]; then
/sbin/chkconfig --del libvirt-guests
/sbin/ldconfig
%if %{with_systemd}
+ %if %{with_systemd_macros}
+ %systemd_post libvirt-guests.service
+ %endif
%else
/sbin/chkconfig --add libvirt-guests
-if [ $1 -ge 1 ]; then
- level=$(/sbin/runlevel | /bin/cut -d ' ' -f 2)
- if /sbin/chkconfig --levels $level libvirt-guests; then
- # this doesn't do anything but allowing for libvirt-guests to be
- # stopped on the first shutdown
- /sbin/service libvirt-guests start > /dev/null 2>&1 || true
- fi
-fi
%endif
-%postun client -p /sbin/ldconfig
+%postun client
+/sbin/ldconfig
%if %{with_systemd}
+ %if %{with_systemd_macros}
+ %systemd_postun_with_restart libvirt-guests.service
+ %endif
%triggerun client -- libvirt < 0.9.4
%{_bindir}/systemd-sysv-convert --save libvirt-guests >/dev/null 2>&1 ||:
/bin/systemctl try-restart libvirt-guests.service >/dev/null 2>&1 || :
%endif
-%if %{with_libvirtd}
+%if %{with_sanlock}
+%post lock-sanlock
+if getent group sanlock > /dev/null ; then
+ chmod 0770 %{_localstatedir}/lib/libvirt/sanlock
+ chown root:sanlock %{_localstatedir}/lib/libvirt/sanlock
+fi
+%endif
+
%files
%defattr(-, root, root)
+%files docs
+%defattr(-, root, root)
+# Website
+%dir %{_datadir}/doc/libvirt-docs-%{version}
+%dir %{_datadir}/doc/libvirt-docs-%{version}/html
+%{_datadir}/doc/libvirt-docs-%{version}/html/*
+
+# API docs
+%dir %{_datadir}/gtk-doc/html/libvirt/
+%doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
+%doc %{_datadir}/gtk-doc/html/libvirt/*.html
+%doc %{_datadir}/gtk-doc/html/libvirt/*.png
+%doc %{_datadir}/gtk-doc/html/libvirt/*.css
+
+%if %{with_libvirtd}
+%files daemon
+%defattr(-, root, root)
+
%doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
-%if %{with_network}
+ %if %{with_network}
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
-%endif
+ %endif
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
-%{_sysconfdir}/libvirt/nwfilter/*.xml
-%{_sysconfdir}/rc.d/init.d/libvirtd
-%if %{with_systemd}
+ %if %{with_systemd}
%{_unitdir}/libvirtd.service
-%endif
+%{_unitdir}/virtlockd.service
+%{_unitdir}/virtlockd.socket
+ %else
+%{_sysconfdir}/rc.d/init.d/libvirtd
+%{_sysconfdir}/rc.d/init.d/virtlockd
+ %endif
%doc daemon/libvirtd.upstart
%config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
+%config(noreplace) %{_sysconfdir}/sysconfig/virtlockd
%config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
-%if 0%{?fedora} >= 14 || 0%{?rhel} >= 6
-%config(noreplace) %{_sysconfdir}/sysctl.d/libvirtd
-%else
-rm -f $RPM_BUILD_ROOT%{_sysconfdir}/sysctl.d/libvirtd
-%endif
-%if %{with_dtrace}
-%{_datadir}/systemtap/tapset/libvirt_probes.stp
-%{_datadir}/systemtap/tapset/libvirt_functions.stp
-%endif
+ %if 0%{?fedora} >= 14 || 0%{?rhel} >= 6
+%config(noreplace) %{_prefix}/lib/sysctl.d/libvirtd.conf
+ %endif
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
-%if %{with_libxl}
+ %if %{with_libxl}
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
-%endif
+ %endif
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
-%if %{with_qemu}
+ %if %{with_qemu}
%config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
+%config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
-%endif
-%if %{with_lxc}
+ %endif
+ %if %{with_lxc}
%config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
-%endif
-%if %{with_uml}
+ %endif
+ %if %{with_uml}
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml
-%endif
+ %endif
%dir %{_datadir}/libvirt/
-%if %{with_network}
+ %if %{with_network}
%dir %{_datadir}/libvirt/networks/
%{_datadir}/libvirt/networks/default.xml
-%endif
+ %endif
%ghost %dir %{_localstatedir}/run/libvirt/
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
%dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/
-%if %{with_qemu}
+ %if %{with_qemu}
%ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
-%endif
-%if %{with_lxc}
+ %endif
+ %if %{with_lxc}
%ghost %dir %{_localstatedir}/run/libvirt/lxc/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
-%endif
-%if %{with_uml}
+ %endif
+ %if %{with_uml}
%ghost %dir %{_localstatedir}/run/libvirt/uml/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
-%endif
-%if %{with_libxl}
+ %endif
+ %if %{with_libxl}
%ghost %dir %{_localstatedir}/run/libvirt/libxl/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
-%endif
-%if %{with_network}
+ %endif
+ %if %{with_xen}
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/xen/
+ %endif
+ %if %{with_network}
%ghost %dir %{_localstatedir}/run/libvirt/network/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
-%endif
+ %endif
-%if %{with_qemu}
+%dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver
+%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so
+
+ %if %{with_qemu}
%{_datadir}/augeas/lenses/libvirtd_qemu.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
-%endif
+ %endif
-%if %{with_lxc}
+ %if %{with_lxc}
%{_datadir}/augeas/lenses/libvirtd_lxc.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
-%endif
+ %endif
%{_datadir}/augeas/lenses/libvirtd.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd.aug
+%{_datadir}/augeas/lenses/libvirt_lockd.aug
+%{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
-%if %{with_polkit}
-%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
+ %if %{with_polkit}
+ %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
%{_datadir}/polkit-1/actions/org.libvirt.unix.policy
-%else
+ %else
%{_datadir}/PolicyKit/policy/org.libvirt.unix.policy
-%endif
-%endif
+ %endif
+ %endif
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
-%if %{with_lxc}
+ %if %{with_lxc}
%attr(0755, root, root) %{_libexecdir}/libvirt_lxc
-%endif
+ %endif
-%if %{with_storage_disk}
+ %if %{with_storage_disk}
%attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
-%endif
+ %endif
%attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
%attr(0755, root, root) %{_sbindir}/libvirtd
+%attr(0755, root, root) %{_sbindir}/virtlockd
%{_mandir}/man8/libvirtd.8*
-%doc docs/*.xml
-%endif
+ %if %{with_driver_modules}
+ %if %{with_network}
+%files daemon-config-network
+%defattr(-, root, root)
+ %endif
+
+ %if %{with_nwfilter}
+%files daemon-config-nwfilter
+%defattr(-, root, root)
+%{_sysconfdir}/libvirt/nwfilter/*.xml
+ %endif
+
+ %if %{with_interface}
+%files daemon-driver-interface
+%defattr(-, root, root)
+%{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so
+ %endif
+
+ %if %{with_network}
+%files daemon-driver-network
+%defattr(-, root, root)
+%{_libdir}/%{name}/connection-driver/libvirt_driver_network.so
+ %endif
+
+ %if %{with_nodedev}
+%files daemon-driver-nodedev
+%defattr(-, root, root)
+%{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so
+ %endif
+
+ %if %{with_nwfilter}
+%files daemon-driver-nwfilter
+%defattr(-, root, root)
+%{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so
+ %endif
+
+%files daemon-driver-secret
+%defattr(-, root, root)
+%{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so
+
+ %if %{with_storage}
+%files daemon-driver-storage
+%defattr(-, root, root)
+%{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so
+ %endif
+
+ %if %{with_qemu}
+%files daemon-driver-qemu
+%defattr(-, root, root)
+%{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so
+ %endif
+
+ %if %{with_lxc}
+%files daemon-driver-lxc
+%defattr(-, root, root)
+%{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so
+ %endif
+
+ %if %{with_uml}
+%files daemon-driver-uml
+%defattr(-, root, root)
+%{_libdir}/%{name}/connection-driver/libvirt_driver_uml.so
+ %endif
+
+ %if %{with_xen}
+%files daemon-driver-xen
+%defattr(-, root, root)
+%{_libdir}/%{name}/connection-driver/libvirt_driver_xen.so
+ %endif
+
+ %if %{with_libxl}
+%files daemon-driver-libxl
+%defattr(-, root, root)
+%{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so
+ %endif
+ %endif # %{with_driver_modules}
+
+ %if %{with_qemu_tcg}
+%files daemon-qemu
+%defattr(-, root, root)
+ %endif
+
+ %if %{with_qemu_kvm}
+%files daemon-kvm
+%defattr(-, root, root)
+ %endif
+
+ %if %{with_lxc}
+%files daemon-lxc
+%defattr(-, root, root)
+ %endif
+
+ %if %{with_uml}
+%files daemon-uml
+%defattr(-, root, root)
+ %endif
+
+ %if %{with_xen} || %{with_libxl}
+%files daemon-xen
+%defattr(-, root, root)
+ %endif
+%endif # %{with_libvirtd}
%if %{with_sanlock}
%files lock-sanlock
%defattr(-, root, root)
-%if %{with_qemu}
+ %if %{with_qemu}
%config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf
-%endif
+ %endif
%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so
%{_datadir}/augeas/lenses/libvirt_sanlock.aug
%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/sanlock
%{_sbindir}/virt-sanlock-cleanup
%{_mandir}/man8/virt-sanlock-cleanup.8*
+%attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper
%endif
%files client -f %{name}.lang
%{_mandir}/man1/virsh.1*
%{_mandir}/man1/virt-xml-validate.1*
%{_mandir}/man1/virt-pki-validate.1*
+%{_mandir}/man1/virt-host-validate.1*
%{_bindir}/virsh
%{_bindir}/virt-xml-validate
%{_bindir}/virt-pki-validate
+%{_bindir}/virt-host-validate
%{_libdir}/lib*.so.*
+%if %{with_dtrace}
+%{_datadir}/systemtap/tapset/libvirt_probes*.stp
+%{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp
+%{_datadir}/systemtap/tapset/libvirt_functions.stp
+%endif
+
%dir %{_datadir}/libvirt/
%dir %{_datadir}/libvirt/schemas/
%{_datadir}/libvirt/cpu_map.xml
-%{_sysconfdir}/rc.d/init.d/libvirt-guests
%if %{with_systemd}
%{_unitdir}/libvirt-guests.service
+%else
+%{_sysconfdir}/rc.d/init.d/libvirt-guests
%endif
%config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests
+%attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
%if %{with_sasl}
%dir %{_includedir}/libvirt
%{_includedir}/libvirt/*.h
%{_libdir}/pkgconfig/libvirt.pc
-%dir %{_datadir}/gtk-doc/html/libvirt/
-%doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
-%doc %{_datadir}/gtk-doc/html/libvirt/*.html
-%doc %{_datadir}/gtk-doc/html/libvirt/*.png
-%doc %{_datadir}/gtk-doc/html/libvirt/*.css
+
+%dir %{_datadir}/libvirt/api/
+%{_datadir}/libvirt/api/libvirt-api.xml
+%{_datadir}/libvirt/api/libvirt-qemu-api.xml
+%{_datadir}/libvirt/api/libvirt-lxc-api.xml
%doc docs/*.html docs/html docs/*.gif
%doc docs/libvirt-api.xml
%doc AUTHORS NEWS README COPYING.LIB
%{_libdir}/python*/site-packages/libvirt.py*
%{_libdir}/python*/site-packages/libvirt_qemu.py*
+%{_libdir}/python*/site-packages/libvirt_lxc.py*
%{_libdir}/python*/site-packages/libvirtmod*
%doc python/tests/*.py
%doc python/TODO
%endif
%changelog
+* Wed Jan 30 2013 Daniel Veillard <veillard@redhat.com> - 1.0.2-1
+- LXC improvements
+- S390 architecture improvement
+- Power architecture improvement
+- large Coverity report cleanups and associated bug fixes
+- virTypedParams* APIs to helps with those data structures
+- a lot of bug fixes and overall improvements
+
+* Fri Nov 2 2012 Daniel Veillard <veillard@redhat.com> - 1.0.0-1
+- virNodeGetCPUMap: Define public API
+- Add systemd journal support
+- Add a qemu capabilities cache manager
+- USB migration support
+- various improvement and fixes when using QMP QEmu interface
+- Support for Xen 4.2
+- Lot of localization enhancements
+- a lot of bug fixes, improvements and portability work
+
+* Mon Sep 24 2012 Daniel Veillard <veillard@redhat.com> - 0.10.2-1
+- network: define new API virNetworkUpdate
+- add support for QEmu sandbox support
+- blockjob: add virDomainBlockCommit
+- New APIs to get/set Node memory parameters
+- new API virConnectListAllSecrets
+- new API virConnectListAllNWFilters
+- new API virConnectListAllNodeDevices
+- parallels: add support of containers to the driver
+- new API virConnectListAllInterfaces
+- new API virConnectListAllNetworks
+- new API virStoragePoolListAllVolumes
+- Add PMSUSPENDED life cycle event
+- new API virStorageListAllStoragePools
+- Add per-guest S3/S4 state configuration
+- qemu: Support for Block Device IO Limits
+- a lot of bug fixes, improvements and portability work
+
+* Fri Aug 31 2012 Daniel Veillard <veillard@redhat.com> - 0.10.1-1
+- bugfixes and a brown paper bag
+
+* Wed Aug 29 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-1
+- agent: add qemuAgentArbitraryCommand() for general qemu agent command
+- Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo functions
+- network: use firewalld instead of iptables, when available
+- network: make network driver vlan-aware
+- esx: Implement network driver
+- driver for parallels hypervisor
+- Various LXC improvements
+- Add virDomainGetHostname
+- a lot of bug fixes, improvements and portability work
+
+* Mon Jul 2 2012 Daniel Veillard <veillard@redhat.com> - 0.9.13-1
+- S390: support for s390(x)
+- snapshot: implement new APIs for esx and vbox
+- snapshot: new query APIs and many improvements
+- virsh: Allow users to reedit rejected XML
+- nwfilter: add DHCP snooping
+- Enable driver modules in libvirt RPM
+- Default to enable driver modules for libvirtd
+- storage backend: Add RBD (RADOS Block Device) support
+- sVirt support for LXC domains inprovement
+- a lot of bug fixes, improvements and portability work
+
+* Mon May 14 2012 Daniel Veillard <veillard@redhat.com> - 0.9.12-1
+- qemu: allow snapshotting of sheepdog and rbd disks
+- blockjob: add new APIs
+- a lot of bug fixes, improvements and portability work
+
+* Tue Apr 3 2012 Daniel Veillard <veillard@redhat.com> - 0.9.11-1
+- Add support for the suspend event
+- Add support for event tray moved of removable disks
+- qemu: Support numad
+- cpustats: API, improvements and qemu support
+- qemu: support type='hostdev' network devices at domain start
+- Introduce virDomainPMWakeup API
+- network: support Open vSwitch
+- a number of snapshot improvements
+- many improvements and bug fixes
+
+* Mon Feb 13 2012 Daniel Veillard <veillard@redhat.com> - 0.9.10-1
+- Add support for sVirt in the LXC driver
+- block rebase: add new API virDomainBlockRebase
+- API: Add api to set and get domain metadata
+- virDomainGetDiskErrors public API
+- conf: add rawio attribute to disk element of domain XML
+- Add new public API virDomainGetCPUStats()
+- Introduce virDomainPMSuspendForDuration API
+- resize: add virStorageVolResize() API
+- Add a virt-host-validate command to sanity check HV config
+- Add new virDomainShutdownFlags API
+- QEMU guest agent support
+- many improvements and bug fixes
+
+* Sat Jan 7 2012 Daniel Veillard <veillard@redhat.com> - 0.9.9-1
+- Add API virDomain{S,G}etInterfaceParameters
+- Add API virDomain{G, S}etNumaParameters
+- Add support for ppc64 qemu
+- Support Xen domctl v8
+- many improvements and bug fixes
+
* Thu Dec 8 2011 Daniel Veillard <veillard@redhat.com> - 0.9.8-1
- Add support for QEMU 1.0
- Add preliminary PPC cpu driver
git://git.onelab.eu / libvirt.git / blobdiff