vserver 1.9.5.x5
[linux-2.6.git] / arch / arm / mach-omap / board-h2.c
1 /*
2  * linux/arch/arm/mach-omap/board-h2.c
3  *
4  * Board specific inits for OMAP-1610 H2
5  *
6  * Copyright (C) 2001 RidgeRun, Inc.
7  * Author: Greg Lonnon <glonnon@ridgerun.com>
8  *
9  * Copyright (C) 2002 MontaVista Software, Inc.
10  *
11  * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
12  * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
13  *
14  * H2 specific changes and cleanup
15  * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
16  *
17  * This program is free software; you can redistribute it and/or modify
18  * it under the terms of the GNU General Public License version 2 as
19  * published by the Free Software Foundation.
20  */
21
22 #include <linux/kernel.h>
23 #include <linux/init.h>
24 #include <linux/device.h>
25 #include <linux/delay.h>
26
27 #include <asm/hardware.h>
28 #include <asm/mach-types.h>
29 #include <asm/mach/arch.h>
30 #include <asm/mach/map.h>
31
32 #include <asm/arch/clocks.h>
33 #include <asm/arch/gpio.h>
34 #include <asm/arch/usb.h>
35
36 #include "common.h"
37
38 extern int omap_gpio_init(void);
39
40 static int __initdata h2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
41
42 static struct resource h2_smc91x_resources[] = {
43         [0] = {
44                 .start  = OMAP1610_ETHR_START,          /* Physical */
45                 .end    = OMAP1610_ETHR_START + SZ_4K,
46                 .flags  = IORESOURCE_MEM,
47         },
48         [1] = {
49                 .start  = OMAP_GPIO_IRQ(0),
50                 .end    = OMAP_GPIO_IRQ(0),
51                 .flags  = IORESOURCE_IRQ,
52         },
53 };
54
55 static struct platform_device h2_smc91x_device = {
56         .name           = "smc91x",
57         .id             = 0,
58         .num_resources  = ARRAY_SIZE(h2_smc91x_resources),
59         .resource       = h2_smc91x_resources,
60 };
61
62 static struct platform_device *h2_devices[] __initdata = {
63         &h2_smc91x_device,
64 };
65
66 static void __init h2_init_smc91x(void)
67 {
68         if ((omap_request_gpio(0)) < 0) {
69                 printk("Error requesting gpio 0 for smc91x irq\n");
70                 return;
71         }
72         omap_set_gpio_edge_ctrl(0, OMAP_GPIO_FALLING_EDGE);
73 }
74
75 void h2_init_irq(void)
76 {
77         omap_init_irq();
78         omap_gpio_init();
79         h2_init_smc91x();
80 }
81
82 static struct omap_usb_config h2_usb_config __initdata = {
83         /* usb1 has a Mini-AB port and external isp1301 transceiver */
84         .otg            = 2,
85
86 #ifdef  CONFIG_USB_GADGET_OMAP
87         .hmc_mode       = 19,   // 0:host(off) 1:dev|otg 2:disabled
88         // .hmc_mode    = 21,   // 0:host(off) 1:dev(loopback) 2:host(loopback)
89 #elif   defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
90         /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
91         .hmc_mode       = 20,   // 1:dev|otg(off) 1:host 2:disabled
92 #endif
93
94         .pins[1]        = 3,
95 };
96
97 static struct omap_mmc_config h2_mmc_config __initdata = {
98         .mmc_blocks             = 1,
99         .mmc1_power_pin         = -1,   /* tps65010 gpio3 */
100         .mmc1_switch_pin        = OMAP_MPUIO(1),
101 };
102
103 static struct omap_board_config_kernel h2_config[] = {
104         { OMAP_TAG_USB,           &h2_usb_config },
105         { OMAP_TAG_MMC,           &h2_mmc_config },
106 };
107
108 static void __init h2_init(void)
109 {
110         platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
111         omap_board_config = h2_config;
112         omap_board_config_size = ARRAY_SIZE(h2_config);
113 }
114
115 static void __init h2_map_io(void)
116 {
117         omap_map_io();
118         omap_serial_init(h2_serial_ports);
119 }
120
121 MACHINE_START(OMAP_H2, "TI-H2")
122         MAINTAINER("Imre Deak <imre.deak@nokia.com>")
123         BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
124         BOOT_PARAMS(0x10000100)
125         MAPIO(h2_map_io)
126         INITIRQ(h2_init_irq)
127         INIT_MACHINE(h2_init)
128         .timer          = &omap_timer,
129 MACHINE_END