2 * linux/arch/i386/kernel/irq.c
4 * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
6 * This file contains the code used by various IRQ handling routines:
7 * asking for different IRQ's should be done through these routines
8 * instead of just grabbing them. Thus setups with different IRQ numbers
9 * shouldn't result in any weird surprises, and installing new handlers
14 * (mostly architecture independent, will move to kernel/irq.c in 2.5.)
16 * IRQs are in fact implemented a bit like signal handlers for the kernel.
17 * Naturally it's not a 1:1 relation, but there are similarities.
20 #include <linux/config.h>
21 #include <linux/errno.h>
22 #include <linux/module.h>
23 #include <linux/signal.h>
24 #include <linux/sched.h>
25 #include <linux/ioport.h>
26 #include <linux/interrupt.h>
27 #include <linux/timex.h>
28 #include <linux/slab.h>
29 #include <linux/random.h>
30 #include <linux/smp_lock.h>
31 #include <linux/init.h>
32 #include <linux/kernel_stat.h>
33 #include <linux/irq.h>
34 #include <linux/proc_fs.h>
35 #include <linux/seq_file.h>
36 #include <linux/kallsyms.h>
38 #include <asm/atomic.h>
41 #include <asm/system.h>
42 #include <asm/bitops.h>
43 #include <asm/uaccess.h>
44 #include <asm/delay.h>
49 * Linux has a controller-independent x86 interrupt architecture.
50 * every controller has a 'controller-template', that is used
51 * by the main code to do the right thing. Each driver-visible
52 * interrupt source is transparently wired to the apropriate
53 * controller. Thus drivers need not be aware of the
54 * interrupt-controller.
56 * Various interrupt controllers we handle: 8259 PIC, SMP IO-APIC,
57 * PIIX4's internal 8259 PIC and SGI's Visual Workstation Cobalt (IO-)APIC.
58 * (IO-APICs assumed to be messaging to Pentium local-APICs)
60 * the code is designed to be easily extended with new/different
61 * interrupt controllers, without having to do assembly magic.
65 * Controller mappings for all interrupt sources:
67 irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = {
69 .handler = &no_irq_type,
70 .lock = SPIN_LOCK_UNLOCKED
74 static void register_irq_proc (unsigned int irq);
77 * per-CPU IRQ handling stacks
79 #ifdef CONFIG_4KSTACKS
80 union irq_ctx *hardirq_ctx[NR_CPUS];
81 union irq_ctx *softirq_ctx[NR_CPUS];
85 * Special irq handlers.
88 irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs)
92 * Generic no controller code
95 static void enable_none(unsigned int irq) { }
96 static unsigned int startup_none(unsigned int irq) { return 0; }
97 static void disable_none(unsigned int irq) { }
98 static void ack_none(unsigned int irq)
101 * 'what should we do if we get a hw irq event on an illegal vector'.
102 * each architecture has to answer this themselves, it doesn't deserve
103 * a generic callback i think.
106 printk("unexpected IRQ trap at vector %02x\n", irq);
107 #ifdef CONFIG_X86_LOCAL_APIC
109 * Currently unexpected vectors happen only on SMP and APIC.
110 * We _must_ ack these because every local APIC has only N
111 * irq slots per priority level, and a 'hanging, unacked' IRQ
112 * holds up an irq slot - in excessive cases (when multiple
113 * unexpected vectors occur) that might lock up the APIC
121 /* startup is the same as "enable", shutdown is same as "disable" */
122 #define shutdown_none disable_none
123 #define end_none enable_none
125 struct hw_interrupt_type no_irq_type = {
135 atomic_t irq_err_count;
136 #if defined(CONFIG_X86_IO_APIC) && defined(APIC_MISMATCH_DEBUG)
137 atomic_t irq_mis_count;
141 * Generic, controller-independent functions:
144 int show_interrupts(struct seq_file *p, void *v)
146 int i = *(loff_t *) v, j;
147 struct irqaction * action;
152 for (j=0; j<NR_CPUS; j++)
154 seq_printf(p, "CPU%d ",j);
159 spin_lock_irqsave(&irq_desc[i].lock, flags);
160 action = irq_desc[i].action;
163 seq_printf(p, "%3d: ",i);
165 seq_printf(p, "%10u ", kstat_irqs(i));
167 for (j = 0; j < NR_CPUS; j++)
169 seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
171 seq_printf(p, " %14s", irq_desc[i].handler->typename);
172 seq_printf(p, " %s", action->name);
174 for (action=action->next; action; action = action->next)
175 seq_printf(p, ", %s", action->name);
179 spin_unlock_irqrestore(&irq_desc[i].lock, flags);
180 } else if (i == NR_IRQS) {
181 seq_printf(p, "NMI: ");
182 for (j = 0; j < NR_CPUS; j++)
184 seq_printf(p, "%10u ", nmi_count(j));
186 #ifdef CONFIG_X86_LOCAL_APIC
187 seq_printf(p, "LOC: ");
188 for (j = 0; j < NR_CPUS; j++)
190 seq_printf(p, "%10u ", irq_stat[j].apic_timer_irqs);
193 seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
194 #if defined(CONFIG_X86_IO_APIC) && defined(APIC_MISMATCH_DEBUG)
195 seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
205 inline void synchronize_irq(unsigned int irq)
207 while (irq_desc[irq].status & IRQ_INPROGRESS)
213 * This should really return information about whether
214 * we should do bottom half handling etc. Right now we
215 * end up _always_ checking the bottom half, which is a
216 * waste of time and is not what some drivers would
219 asmlinkage int handle_IRQ_event(unsigned int irq,
220 struct pt_regs *regs, struct irqaction *action)
222 int status = 1; /* Force the "do bottom halves" bit */
225 if (!(action->flags & SA_INTERRUPT))
229 ret = action->handler(irq, action->dev_id, regs);
230 if (ret == IRQ_HANDLED)
231 status |= action->flags;
233 action = action->next;
235 if (status & SA_SAMPLE_RANDOM)
236 add_interrupt_randomness(irq);
241 static void __report_bad_irq(int irq, irq_desc_t *desc, irqreturn_t action_ret)
243 struct irqaction *action;
245 if (action_ret != IRQ_HANDLED && action_ret != IRQ_NONE) {
246 printk(KERN_ERR "irq event %d: bogus return value %x\n",
249 printk(KERN_ERR "irq %d: nobody cared!\n", irq);
252 printk(KERN_ERR "handlers:\n");
253 action = desc->action;
255 printk(KERN_ERR "[<%p>]", action->handler);
256 print_symbol(" (%s)",
257 (unsigned long)action->handler);
259 action = action->next;
263 static void report_bad_irq(int irq, irq_desc_t *desc, irqreturn_t action_ret)
265 static int count = 100;
269 __report_bad_irq(irq, desc, action_ret);
273 static int noirqdebug;
275 static int __init noirqdebug_setup(char *str)
278 printk("IRQ lockup detection disabled\n");
282 __setup("noirqdebug", noirqdebug_setup);
285 * If 99,900 of the previous 100,000 interrupts have not been handled then
286 * assume that the IRQ is stuck in some manner. Drop a diagnostic and try to
289 * (The other 100-of-100,000 interrupts may have been a correctly-functioning
290 * device sharing an IRQ with the failing one)
292 * Called under desc->lock
294 static void note_interrupt(int irq, irq_desc_t *desc, irqreturn_t action_ret)
296 if (action_ret != IRQ_HANDLED) {
297 desc->irqs_unhandled++;
298 if (action_ret != IRQ_NONE)
299 report_bad_irq(irq, desc, action_ret);
303 if (desc->irq_count < 100000)
307 if (desc->irqs_unhandled > 99900) {
309 * The interrupt is stuck
311 __report_bad_irq(irq, desc, action_ret);
315 printk(KERN_EMERG "Disabling IRQ #%d\n", irq);
316 desc->status |= IRQ_DISABLED;
317 desc->handler->disable(irq);
319 desc->irqs_unhandled = 0;
323 * Generic enable/disable code: this just calls
324 * down into the PIC-specific version for the actual
325 * hardware disable after having gotten the irq
330 * disable_irq_nosync - disable an irq without waiting
331 * @irq: Interrupt to disable
333 * Disable the selected interrupt line. Disables and Enables are
335 * Unlike disable_irq(), this function does not ensure existing
336 * instances of the IRQ handler have completed before returning.
338 * This function may be called from IRQ context.
341 inline void disable_irq_nosync(unsigned int irq)
343 irq_desc_t *desc = irq_desc + irq;
346 spin_lock_irqsave(&desc->lock, flags);
347 if (!desc->depth++) {
348 desc->status |= IRQ_DISABLED;
349 desc->handler->disable(irq);
351 spin_unlock_irqrestore(&desc->lock, flags);
355 * disable_irq - disable an irq and wait for completion
356 * @irq: Interrupt to disable
358 * Disable the selected interrupt line. Enables and Disables are
360 * This function waits for any pending IRQ handlers for this interrupt
361 * to complete before returning. If you use this function while
362 * holding a resource the IRQ handler may need you will deadlock.
364 * This function may be called - with care - from IRQ context.
367 void disable_irq(unsigned int irq)
369 irq_desc_t *desc = irq_desc + irq;
370 disable_irq_nosync(irq);
372 synchronize_irq(irq);
376 * enable_irq - enable handling of an irq
377 * @irq: Interrupt to enable
379 * Undoes the effect of one call to disable_irq(). If this
380 * matches the last disable, processing of interrupts on this
381 * IRQ line is re-enabled.
383 * This function may be called from IRQ context.
386 void enable_irq(unsigned int irq)
388 irq_desc_t *desc = irq_desc + irq;
391 spin_lock_irqsave(&desc->lock, flags);
392 switch (desc->depth) {
394 unsigned int status = desc->status & ~IRQ_DISABLED;
395 desc->status = status;
396 if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) {
397 desc->status = status | IRQ_REPLAY;
398 hw_resend_irq(desc->handler,irq);
400 desc->handler->enable(irq);
407 printk("enable_irq(%u) unbalanced from %p\n", irq,
408 __builtin_return_address(0));
410 spin_unlock_irqrestore(&desc->lock, flags);
414 * do_IRQ handles all normal device IRQ's (the special
415 * SMP cross-CPU interrupts have their own specific
418 asmlinkage unsigned int do_IRQ(struct pt_regs regs)
421 * We ack quickly, we don't want the irq controller
422 * thinking we're snobs just because some other CPU has
423 * disabled global interrupts (we have already done the
424 * INT_ACK cycles, it's too late to try to pretend to the
425 * controller that we aren't taking the interrupt).
427 * 0 return value means that this irq is already being
428 * handled by some other CPU. (or is disabled)
430 int irq = regs.orig_eax & 0xff; /* high bits used in ret_from_ code */
431 irq_desc_t *desc = irq_desc + irq;
432 struct irqaction * action;
437 #ifdef CONFIG_DEBUG_STACKOVERFLOW
438 /* Debugging check for stack overflow: is there less than 1KB free? */
442 __asm__ __volatile__("andl %%esp,%0" :
443 "=r" (esp) : "0" (THREAD_SIZE - 1));
444 if (unlikely(esp < (sizeof(struct thread_info) + STACK_WARN))) {
445 printk("do_IRQ: stack overflow: %ld\n",
446 esp - sizeof(struct thread_info));
451 kstat_this_cpu.irqs[irq]++;
452 spin_lock(&desc->lock);
453 desc->handler->ack(irq);
455 REPLAY is when Linux resends an IRQ that was dropped earlier
456 WAITING is used by probe to mark irqs that are being tested
458 status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING);
459 status |= IRQ_PENDING; /* we _want_ to handle it */
462 * If the IRQ is disabled for whatever reason, we cannot
463 * use the action we have.
466 if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) {
467 action = desc->action;
468 status &= ~IRQ_PENDING; /* we commit to handling */
469 status |= IRQ_INPROGRESS; /* we are handling it */
471 desc->status = status;
474 * If there is no IRQ handler or it was disabled, exit early.
475 Since we set PENDING, if another processor is handling
476 a different instance of this same irq, the other processor
477 will take care of it.
479 if (unlikely(!action))
483 * Edge triggered interrupts need to remember
485 * This applies to any hw interrupts that allow a second
486 * instance of the same irq to arrive while we are in do_IRQ
487 * or in the handler. But the code here only handles the _second_
488 * instance of the irq, not the third or fourth. So it is mostly
489 * useful for irq hardware that does not mask cleanly in an
492 #ifdef CONFIG_4KSTACKS
495 irqreturn_t action_ret;
497 union irq_ctx * curctx;
498 union irq_ctx * irqctx;
500 curctx = (union irq_ctx *) current_thread_info();
501 irqctx = hardirq_ctx[smp_processor_id()];
503 spin_unlock(&desc->lock);
506 * this is where we switch to the IRQ stack. However, if we are already using
507 * the IRQ stack (because we interrupted a hardirq handler) we can't do that
508 * and just have to keep using the current stack (which is the irq stack already
512 if (curctx == irqctx)
513 action_ret = handle_IRQ_event(irq, ®s, action);
515 /* build the stack frame on the IRQ stack */
516 isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
517 irqctx->tinfo.task = curctx->tinfo.task;
518 irqctx->tinfo.previous_esp = current_stack_pointer();
520 *--isp = (u32) action;
521 *--isp = (u32) ®s;
525 " xchgl %%ebx,%%esp \n"
526 " call handle_IRQ_event \n"
527 " xchgl %%ebx,%%esp \n"
530 : "memory", "cc", "edx", "ecx"
535 spin_lock(&desc->lock);
537 note_interrupt(irq, desc, action_ret);
538 if (curctx != irqctx)
539 irqctx->tinfo.task = NULL;
540 if (likely(!(desc->status & IRQ_PENDING)))
542 desc->status &= ~IRQ_PENDING;
548 irqreturn_t action_ret;
550 spin_unlock(&desc->lock);
552 action_ret = handle_IRQ_event(irq, ®s, action);
554 spin_lock(&desc->lock);
556 note_interrupt(irq, desc, action_ret);
557 if (likely(!(desc->status & IRQ_PENDING)))
559 desc->status &= ~IRQ_PENDING;
562 desc->status &= ~IRQ_INPROGRESS;
566 * The ->end() handler has to deal with interrupts which got
567 * disabled while the handler was running.
569 desc->handler->end(irq);
570 spin_unlock(&desc->lock);
577 int can_request_irq(unsigned int irq, unsigned long irqflags)
579 struct irqaction *action;
583 action = irq_desc[irq].action;
585 if (irqflags & action->flags & SA_SHIRQ)
592 * request_irq - allocate an interrupt line
593 * @irq: Interrupt line to allocate
594 * @handler: Function to be called when the IRQ occurs
595 * @irqflags: Interrupt type flags
596 * @devname: An ascii name for the claiming device
597 * @dev_id: A cookie passed back to the handler function
599 * This call allocates interrupt resources and enables the
600 * interrupt line and IRQ handling. From the point this
601 * call is made your handler function may be invoked. Since
602 * your handler function must clear any interrupt the board
603 * raises, you must take care both to initialise your hardware
604 * and to set up the interrupt handler in the right order.
606 * Dev_id must be globally unique. Normally the address of the
607 * device data structure is used as the cookie. Since the handler
608 * receives this value it makes sense to use it.
610 * If your interrupt is shared you must pass a non NULL dev_id
611 * as this is required when freeing the interrupt.
615 * SA_SHIRQ Interrupt is shared
617 * SA_INTERRUPT Disable local interrupts while processing
619 * SA_SAMPLE_RANDOM The interrupt can be used for entropy
623 int request_irq(unsigned int irq,
624 irqreturn_t (*handler)(int, void *, struct pt_regs *),
625 unsigned long irqflags,
626 const char * devname,
630 struct irqaction * action;
634 * Sanity-check: shared interrupts should REALLY pass in
635 * a real dev-ID, otherwise we'll have trouble later trying
636 * to figure out which interrupt is which (messes up the
637 * interrupt freeing logic etc).
639 if (irqflags & SA_SHIRQ) {
641 printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n", devname, (&irq)[-1]);
650 action = (struct irqaction *)
651 kmalloc(sizeof(struct irqaction), GFP_ATOMIC);
655 action->handler = handler;
656 action->flags = irqflags;
657 cpus_clear(action->mask);
658 action->name = devname;
660 action->dev_id = dev_id;
662 retval = setup_irq(irq, action);
668 EXPORT_SYMBOL(request_irq);
671 * free_irq - free an interrupt
672 * @irq: Interrupt line to free
673 * @dev_id: Device identity to free
675 * Remove an interrupt handler. The handler is removed and if the
676 * interrupt line is no longer in use by any driver it is disabled.
677 * On a shared IRQ the caller must ensure the interrupt is disabled
678 * on the card it drives before calling this function. The function
679 * does not return until any executing interrupts for this IRQ
682 * This function must not be called from interrupt context.
685 void free_irq(unsigned int irq, void *dev_id)
688 struct irqaction **p;
694 desc = irq_desc + irq;
695 spin_lock_irqsave(&desc->lock,flags);
698 struct irqaction * action = *p;
700 struct irqaction **pp = p;
702 if (action->dev_id != dev_id)
705 /* Found it - now remove it from the list of entries */
708 desc->status |= IRQ_DISABLED;
709 desc->handler->shutdown(irq);
711 spin_unlock_irqrestore(&desc->lock,flags);
713 /* Wait to make sure it's not being used on another CPU */
714 synchronize_irq(irq);
718 printk("Trying to free free IRQ%d\n",irq);
719 spin_unlock_irqrestore(&desc->lock,flags);
724 EXPORT_SYMBOL(free_irq);
727 * IRQ autodetection code..
729 * This depends on the fact that any interrupt that
730 * comes in on to an unassigned handler will get stuck
731 * with "IRQ_WAITING" cleared and the interrupt
735 static DECLARE_MUTEX(probe_sem);
738 * probe_irq_on - begin an interrupt autodetect
740 * Commence probing for an interrupt. The interrupts are scanned
741 * and a mask of potential interrupt lines is returned.
745 unsigned long probe_irq_on(void)
754 * something may have generated an irq long ago and we want to
755 * flush such a longstanding irq before considering it as spurious.
757 for (i = NR_IRQS-1; i > 0; i--) {
760 spin_lock_irq(&desc->lock);
761 if (!irq_desc[i].action)
762 irq_desc[i].handler->startup(i);
763 spin_unlock_irq(&desc->lock);
766 /* Wait for longstanding interrupts to trigger. */
767 for (delay = jiffies + HZ/50; time_after(delay, jiffies); )
768 /* about 20ms delay */ barrier();
771 * enable any unassigned irqs
772 * (we must startup again here because if a longstanding irq
773 * happened in the previous stage, it may have masked itself)
775 for (i = NR_IRQS-1; i > 0; i--) {
778 spin_lock_irq(&desc->lock);
780 desc->status |= IRQ_AUTODETECT | IRQ_WAITING;
781 if (desc->handler->startup(i))
782 desc->status |= IRQ_PENDING;
784 spin_unlock_irq(&desc->lock);
788 * Wait for spurious interrupts to trigger
790 for (delay = jiffies + HZ/10; time_after(delay, jiffies); )
791 /* about 100ms delay */ barrier();
794 * Now filter out any obviously spurious interrupts
797 for (i = 0; i < NR_IRQS; i++) {
798 irq_desc_t *desc = irq_desc + i;
801 spin_lock_irq(&desc->lock);
802 status = desc->status;
804 if (status & IRQ_AUTODETECT) {
805 /* It triggered already - consider it spurious. */
806 if (!(status & IRQ_WAITING)) {
807 desc->status = status & ~IRQ_AUTODETECT;
808 desc->handler->shutdown(i);
813 spin_unlock_irq(&desc->lock);
819 EXPORT_SYMBOL(probe_irq_on);
822 * Return a mask of triggered interrupts (this
823 * can handle only legacy ISA interrupts).
827 * probe_irq_mask - scan a bitmap of interrupt lines
828 * @val: mask of interrupts to consider
830 * Scan the ISA bus interrupt lines and return a bitmap of
831 * active interrupts. The interrupt probe logic state is then
832 * returned to its previous value.
834 * Note: we need to scan all the irq's even though we will
835 * only return ISA irq numbers - just so that we reset them
836 * all to a known state.
838 unsigned int probe_irq_mask(unsigned long val)
844 for (i = 0; i < NR_IRQS; i++) {
845 irq_desc_t *desc = irq_desc + i;
848 spin_lock_irq(&desc->lock);
849 status = desc->status;
851 if (status & IRQ_AUTODETECT) {
852 if (i < 16 && !(status & IRQ_WAITING))
855 desc->status = status & ~IRQ_AUTODETECT;
856 desc->handler->shutdown(i);
858 spin_unlock_irq(&desc->lock);
866 * Return the one interrupt that triggered (this can
867 * handle any interrupt source).
871 * probe_irq_off - end an interrupt autodetect
872 * @val: mask of potential interrupts (unused)
874 * Scans the unused interrupt lines and returns the line which
875 * appears to have triggered the interrupt. If no interrupt was
876 * found then zero is returned. If more than one interrupt is
877 * found then minus the first candidate is returned to indicate
880 * The interrupt probe logic state is returned to its previous
883 * BUGS: When used in a module (which arguably shouldnt happen)
884 * nothing prevents two IRQ probe callers from overlapping. The
885 * results of this are non-optimal.
888 int probe_irq_off(unsigned long val)
890 int i, irq_found, nr_irqs;
894 for (i = 0; i < NR_IRQS; i++) {
895 irq_desc_t *desc = irq_desc + i;
898 spin_lock_irq(&desc->lock);
899 status = desc->status;
901 if (status & IRQ_AUTODETECT) {
902 if (!(status & IRQ_WAITING)) {
907 desc->status = status & ~IRQ_AUTODETECT;
908 desc->handler->shutdown(i);
910 spin_unlock_irq(&desc->lock);
915 irq_found = -irq_found;
919 EXPORT_SYMBOL(probe_irq_off);
921 /* this was setup_x86_irq but it seems pretty generic */
922 int setup_irq(unsigned int irq, struct irqaction * new)
926 struct irqaction *old, **p;
927 irq_desc_t *desc = irq_desc + irq;
929 if (desc->handler == &no_irq_type)
932 * Some drivers like serial.c use request_irq() heavily,
933 * so we have to be careful not to interfere with a
936 if (new->flags & SA_SAMPLE_RANDOM) {
938 * This function might sleep, we want to call it first,
939 * outside of the atomic block.
940 * Yes, this might clear the entropy pool if the wrong
941 * driver is attempted to be loaded, without actually
942 * installing a new handler, but is this really a problem,
943 * only the sysadmin is able to do this.
945 rand_initialize_irq(irq);
949 * The following block of code has to be executed atomically
951 spin_lock_irqsave(&desc->lock,flags);
953 if ((old = *p) != NULL) {
954 /* Can't share interrupts unless both agree to */
955 if (!(old->flags & new->flags & SA_SHIRQ)) {
956 spin_unlock_irqrestore(&desc->lock,flags);
960 /* add new interrupt at end of irq queue */
972 desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS);
973 desc->handler->startup(irq);
975 spin_unlock_irqrestore(&desc->lock,flags);
977 register_irq_proc(irq);
981 static struct proc_dir_entry * root_irq_dir;
982 static struct proc_dir_entry * irq_dir [NR_IRQS];
986 static struct proc_dir_entry *smp_affinity_entry[NR_IRQS];
988 cpumask_t irq_affinity[NR_IRQS] = { [0 ... NR_IRQS-1] = CPU_MASK_ALL };
990 static int irq_affinity_read_proc(char *page, char **start, off_t off,
991 int count, int *eof, void *data)
993 int len = cpumask_scnprintf(page, count, irq_affinity[(long)data]);
996 len += sprintf(page + len, "\n");
1000 static int irq_affinity_write_proc(struct file *file, const char __user *buffer,
1001 unsigned long count, void *data)
1003 int irq = (long)data, full_count = count, err;
1004 cpumask_t new_value, tmp;
1006 if (!irq_desc[irq].handler->set_affinity)
1009 err = cpumask_parse(buffer, count, new_value);
1014 * Do not allow disabling IRQs completely - it's a too easy
1015 * way to make the system unusable accidentally :-) At least
1016 * one online CPU still has to be targeted.
1018 cpus_and(tmp, new_value, cpu_online_map);
1019 if (cpus_empty(tmp))
1022 irq_affinity[irq] = new_value;
1023 irq_desc[irq].handler->set_affinity(irq,
1024 cpumask_of_cpu(first_cpu(new_value)));
1030 #define MAX_NAMELEN 10
1032 static void register_irq_proc (unsigned int irq)
1034 char name [MAX_NAMELEN];
1036 if (!root_irq_dir || (irq_desc[irq].handler == &no_irq_type) ||
1040 memset(name, 0, MAX_NAMELEN);
1041 sprintf(name, "%d", irq);
1043 /* create /proc/irq/1234 */
1044 irq_dir[irq] = proc_mkdir(name, root_irq_dir);
1048 struct proc_dir_entry *entry;
1050 /* create /proc/irq/1234/smp_affinity */
1051 entry = create_proc_entry("smp_affinity", 0600, irq_dir[irq]);
1055 entry->data = (void *)(long)irq;
1056 entry->read_proc = irq_affinity_read_proc;
1057 entry->write_proc = irq_affinity_write_proc;
1060 smp_affinity_entry[irq] = entry;
1065 void init_irq_proc (void)
1069 /* create /proc/irq */
1070 root_irq_dir = proc_mkdir("irq", NULL);
1071 create_prof_cpu_mask(root_irq_dir);
1073 * Create entries for all existing IRQs.
1075 for (i = 0; i < NR_IRQS; i++)
1076 register_irq_proc(i);
1080 #ifdef CONFIG_4KSTACKS
1082 * These should really be __section__(".bss.page_aligned") as well, but
1083 * gcc's 3.0 and earlier don't handle that correctly.
1085 static char softirq_stack[NR_CPUS * THREAD_SIZE] __attribute__((__aligned__(THREAD_SIZE)));
1086 static char hardirq_stack[NR_CPUS * THREAD_SIZE] __attribute__((__aligned__(THREAD_SIZE)));
1089 * allocate per-cpu stacks for hardirq and for softirq processing
1091 void irq_ctx_init(int cpu)
1093 union irq_ctx *irqctx;
1095 if (hardirq_ctx[cpu])
1098 irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE];
1099 irqctx->tinfo.task = NULL;
1100 irqctx->tinfo.exec_domain = NULL;
1101 irqctx->tinfo.cpu = cpu;
1102 irqctx->tinfo.preempt_count = HARDIRQ_OFFSET;
1103 irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
1105 hardirq_ctx[cpu] = irqctx;
1107 irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE];
1108 irqctx->tinfo.task = NULL;
1109 irqctx->tinfo.exec_domain = NULL;
1110 irqctx->tinfo.cpu = cpu;
1111 irqctx->tinfo.preempt_count = SOFTIRQ_OFFSET;
1112 irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
1114 softirq_ctx[cpu] = irqctx;
1116 printk("CPU %u irqstacks, hard=%p soft=%p\n",
1117 cpu,hardirq_ctx[cpu],softirq_ctx[cpu]);
1120 extern asmlinkage void __do_softirq(void);
1122 asmlinkage void do_softirq(void)
1124 unsigned long flags;
1125 struct thread_info *curctx;
1126 union irq_ctx *irqctx;
1132 local_irq_save(flags);
1134 if (local_softirq_pending()) {
1135 curctx = current_thread_info();
1136 irqctx = softirq_ctx[smp_processor_id()];
1137 irqctx->tinfo.task = curctx->task;
1138 irqctx->tinfo.previous_esp = current_stack_pointer();
1140 /* build the stack frame on the softirq stack */
1141 isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
1145 " xchgl %%ebx,%%esp \n"
1146 " call __do_softirq \n"
1147 " movl %%ebx,%%esp \n"
1150 : "memory", "cc", "edx", "ecx", "eax"
1154 local_irq_restore(flags);
1157 EXPORT_SYMBOL(do_softirq);