vserver 2.0 rc7
[linux-2.6.git] / arch / i386 / kernel / nmi.c
1 /*
2  *  linux/arch/i386/nmi.c
3  *
4  *  NMI watchdog support on APIC systems
5  *
6  *  Started by Ingo Molnar <mingo@redhat.com>
7  *
8  *  Fixes:
9  *  Mikael Pettersson   : AMD K7 support for local APIC NMI watchdog.
10  *  Mikael Pettersson   : Power Management for local APIC NMI watchdog.
11  *  Mikael Pettersson   : Pentium 4 support for local APIC NMI watchdog.
12  *  Pavel Machek and
13  *  Mikael Pettersson   : PM converted to driver model. Disable/enable API.
14  */
15
16 #include <linux/config.h>
17 #include <linux/mm.h>
18 #include <linux/irq.h>
19 #include <linux/delay.h>
20 #include <linux/bootmem.h>
21 #include <linux/smp_lock.h>
22 #include <linux/interrupt.h>
23 #include <linux/mc146818rtc.h>
24 #include <linux/kernel_stat.h>
25 #include <linux/module.h>
26 #include <linux/nmi.h>
27 #include <linux/sysdev.h>
28 #include <linux/sysctl.h>
29
30 #include <asm/smp.h>
31 #include <asm/mtrr.h>
32 #include <asm/mpspec.h>
33 #include <asm/nmi.h>
34
35 #include "mach_traps.h"
36
37 unsigned int nmi_watchdog = NMI_NONE;
38 extern int unknown_nmi_panic;
39 static unsigned int nmi_hz = HZ;
40 static unsigned int nmi_perfctr_msr;    /* the MSR to reset in NMI handler */
41 static unsigned int nmi_p4_cccr_val;
42 extern void show_registers(struct pt_regs *regs);
43
44 /*
45  * lapic_nmi_owner tracks the ownership of the lapic NMI hardware:
46  * - it may be reserved by some other driver, or not
47  * - when not reserved by some other driver, it may be used for
48  *   the NMI watchdog, or not
49  *
50  * This is maintained separately from nmi_active because the NMI
51  * watchdog may also be driven from the I/O APIC timer.
52  */
53 static DEFINE_SPINLOCK(lapic_nmi_owner_lock);
54 static unsigned int lapic_nmi_owner;
55 #define LAPIC_NMI_WATCHDOG      (1<<0)
56 #define LAPIC_NMI_RESERVED      (1<<1)
57
58 /* nmi_active:
59  * +1: the lapic NMI watchdog is active, but can be disabled
60  *  0: the lapic NMI watchdog has not been set up, and cannot
61  *     be enabled
62  * -1: the lapic NMI watchdog is disabled, but can be enabled
63  */
64 int nmi_active;
65
66 #define K7_EVNTSEL_ENABLE       (1 << 22)
67 #define K7_EVNTSEL_INT          (1 << 20)
68 #define K7_EVNTSEL_OS           (1 << 17)
69 #define K7_EVNTSEL_USR          (1 << 16)
70 #define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING    0x76
71 #define K7_NMI_EVENT            K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
72
73 #define P6_EVNTSEL0_ENABLE      (1 << 22)
74 #define P6_EVNTSEL_INT          (1 << 20)
75 #define P6_EVNTSEL_OS           (1 << 17)
76 #define P6_EVNTSEL_USR          (1 << 16)
77 #define P6_EVENT_CPU_CLOCKS_NOT_HALTED  0x79
78 #define P6_NMI_EVENT            P6_EVENT_CPU_CLOCKS_NOT_HALTED
79
80 #define MSR_P4_MISC_ENABLE      0x1A0
81 #define MSR_P4_MISC_ENABLE_PERF_AVAIL   (1<<7)
82 #define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL (1<<12)
83 #define MSR_P4_PERFCTR0         0x300
84 #define MSR_P4_CCCR0            0x360
85 #define P4_ESCR_EVENT_SELECT(N) ((N)<<25)
86 #define P4_ESCR_OS              (1<<3)
87 #define P4_ESCR_USR             (1<<2)
88 #define P4_CCCR_OVF_PMI0        (1<<26)
89 #define P4_CCCR_OVF_PMI1        (1<<27)
90 #define P4_CCCR_THRESHOLD(N)    ((N)<<20)
91 #define P4_CCCR_COMPLEMENT      (1<<19)
92 #define P4_CCCR_COMPARE         (1<<18)
93 #define P4_CCCR_REQUIRED        (3<<16)
94 #define P4_CCCR_ESCR_SELECT(N)  ((N)<<13)
95 #define P4_CCCR_ENABLE          (1<<12)
96 /* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
97    CRU_ESCR0 (with any non-null event selector) through a complemented
98    max threshold. [IA32-Vol3, Section 14.9.9] */
99 #define MSR_P4_IQ_COUNTER0      0x30C
100 #define P4_NMI_CRU_ESCR0        (P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR)
101 #define P4_NMI_IQ_CCCR0 \
102         (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT|     \
103          P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
104
105 static int __init check_nmi_watchdog(void)
106 {
107         unsigned int prev_nmi_count[NR_CPUS];
108         int cpu;
109
110         if (nmi_watchdog == NMI_NONE)
111                 return 0;
112
113         printk(KERN_INFO "Testing NMI watchdog ... ");
114
115         for (cpu = 0; cpu < NR_CPUS; cpu++)
116                 prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count;
117         local_irq_enable();
118         mdelay((10*1000)/nmi_hz); // wait 10 ticks
119
120         for (cpu = 0; cpu < NR_CPUS; cpu++) {
121 #ifdef CONFIG_SMP
122                 /* Check cpu_callin_map here because that is set
123                    after the timer is started. */
124                 if (!cpu_isset(cpu, cpu_callin_map))
125                         continue;
126 #endif
127                 if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
128                         printk("CPU#%d: NMI appears to be stuck!\n", cpu);
129                         nmi_active = 0;
130                         lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
131                         return -1;
132                 }
133         }
134         printk("OK.\n");
135
136         /* now that we know it works we can reduce NMI frequency to
137            something more reasonable; makes a difference in some configs */
138         if (nmi_watchdog == NMI_LOCAL_APIC)
139                 nmi_hz = 1;
140
141         return 0;
142 }
143 /* This needs to happen later in boot so counters are working */
144 late_initcall(check_nmi_watchdog);
145
146 static int __init setup_nmi_watchdog(char *str)
147 {
148         int nmi;
149
150         get_option(&str, &nmi);
151
152         if (nmi >= NMI_INVALID)
153                 return 0;
154         if (nmi == NMI_NONE)
155                 nmi_watchdog = nmi;
156         /*
157          * If any other x86 CPU has a local APIC, then
158          * please test the NMI stuff there and send me the
159          * missing bits. Right now Intel P6/P4 and AMD K7 only.
160          */
161         if ((nmi == NMI_LOCAL_APIC) &&
162                         (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
163                         (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15))
164                 nmi_watchdog = nmi;
165         if ((nmi == NMI_LOCAL_APIC) &&
166                         (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
167                         (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15))
168                 nmi_watchdog = nmi;
169         /*
170          * We can enable the IO-APIC watchdog
171          * unconditionally.
172          */
173         if (nmi == NMI_IO_APIC) {
174                 nmi_active = 1;
175                 nmi_watchdog = nmi;
176         }
177         return 1;
178 }
179
180 __setup("nmi_watchdog=", setup_nmi_watchdog);
181
182 static void disable_lapic_nmi_watchdog(void)
183 {
184         if (nmi_active <= 0)
185                 return;
186         switch (boot_cpu_data.x86_vendor) {
187         case X86_VENDOR_AMD:
188                 wrmsr(MSR_K7_EVNTSEL0, 0, 0);
189                 break;
190         case X86_VENDOR_INTEL:
191                 switch (boot_cpu_data.x86) {
192                 case 6:
193                         if (boot_cpu_data.x86_model > 0xd)
194                                 break;
195
196                         wrmsr(MSR_P6_EVNTSEL0, 0, 0);
197                         break;
198                 case 15:
199                         if (boot_cpu_data.x86_model > 0x3)
200                                 break;
201
202                         wrmsr(MSR_P4_IQ_CCCR0, 0, 0);
203                         wrmsr(MSR_P4_CRU_ESCR0, 0, 0);
204                         break;
205                 }
206                 break;
207         }
208         nmi_active = -1;
209         /* tell do_nmi() and others that we're not active any more */
210         nmi_watchdog = 0;
211 }
212
213 static void enable_lapic_nmi_watchdog(void)
214 {
215         if (nmi_active < 0) {
216                 nmi_watchdog = NMI_LOCAL_APIC;
217                 setup_apic_nmi_watchdog();
218         }
219 }
220
221 int reserve_lapic_nmi(void)
222 {
223         unsigned int old_owner;
224
225         spin_lock(&lapic_nmi_owner_lock);
226         old_owner = lapic_nmi_owner;
227         lapic_nmi_owner |= LAPIC_NMI_RESERVED;
228         spin_unlock(&lapic_nmi_owner_lock);
229         if (old_owner & LAPIC_NMI_RESERVED)
230                 return -EBUSY;
231         if (old_owner & LAPIC_NMI_WATCHDOG)
232                 disable_lapic_nmi_watchdog();
233         return 0;
234 }
235
236 void release_lapic_nmi(void)
237 {
238         unsigned int new_owner;
239
240         spin_lock(&lapic_nmi_owner_lock);
241         new_owner = lapic_nmi_owner & ~LAPIC_NMI_RESERVED;
242         lapic_nmi_owner = new_owner;
243         spin_unlock(&lapic_nmi_owner_lock);
244         if (new_owner & LAPIC_NMI_WATCHDOG)
245                 enable_lapic_nmi_watchdog();
246 }
247
248 void disable_timer_nmi_watchdog(void)
249 {
250         if ((nmi_watchdog != NMI_IO_APIC) || (nmi_active <= 0))
251                 return;
252
253         unset_nmi_callback();
254         nmi_active = -1;
255         nmi_watchdog = NMI_NONE;
256 }
257
258 void enable_timer_nmi_watchdog(void)
259 {
260         if (nmi_active < 0) {
261                 nmi_watchdog = NMI_IO_APIC;
262                 touch_nmi_watchdog();
263                 nmi_active = 1;
264         }
265 }
266
267 #ifdef CONFIG_PM
268
269 static int nmi_pm_active; /* nmi_active before suspend */
270
271 static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
272 {
273         nmi_pm_active = nmi_active;
274         disable_lapic_nmi_watchdog();
275         return 0;
276 }
277
278 static int lapic_nmi_resume(struct sys_device *dev)
279 {
280         if (nmi_pm_active > 0)
281                 enable_lapic_nmi_watchdog();
282         return 0;
283 }
284
285
286 static struct sysdev_class nmi_sysclass = {
287         set_kset_name("lapic_nmi"),
288         .resume         = lapic_nmi_resume,
289         .suspend        = lapic_nmi_suspend,
290 };
291
292 static struct sys_device device_lapic_nmi = {
293         .id     = 0,
294         .cls    = &nmi_sysclass,
295 };
296
297 static int __init init_lapic_nmi_sysfs(void)
298 {
299         int error;
300
301         if (nmi_active == 0 || nmi_watchdog != NMI_LOCAL_APIC)
302                 return 0;
303
304         error = sysdev_class_register(&nmi_sysclass);
305         if (!error)
306                 error = sysdev_register(&device_lapic_nmi);
307         return error;
308 }
309 /* must come after the local APIC's device_initcall() */
310 late_initcall(init_lapic_nmi_sysfs);
311
312 #endif  /* CONFIG_PM */
313
314 /*
315  * Activate the NMI watchdog via the local APIC.
316  * Original code written by Keith Owens.
317  */
318
319 static void clear_msr_range(unsigned int base, unsigned int n)
320 {
321         unsigned int i;
322
323         for(i = 0; i < n; ++i)
324                 wrmsr(base+i, 0, 0);
325 }
326
327 static void setup_k7_watchdog(void)
328 {
329         unsigned int evntsel;
330
331         nmi_perfctr_msr = MSR_K7_PERFCTR0;
332
333         clear_msr_range(MSR_K7_EVNTSEL0, 4);
334         clear_msr_range(MSR_K7_PERFCTR0, 4);
335
336         evntsel = K7_EVNTSEL_INT
337                 | K7_EVNTSEL_OS
338                 | K7_EVNTSEL_USR
339                 | K7_NMI_EVENT;
340
341         wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
342         Dprintk("setting K7_PERFCTR0 to %08lx\n", -(cpu_khz/nmi_hz*1000));
343         wrmsr(MSR_K7_PERFCTR0, -(cpu_khz/nmi_hz*1000), -1);
344         apic_write(APIC_LVTPC, APIC_DM_NMI);
345         evntsel |= K7_EVNTSEL_ENABLE;
346         wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
347 }
348
349 static void setup_p6_watchdog(void)
350 {
351         unsigned int evntsel;
352
353         nmi_perfctr_msr = MSR_P6_PERFCTR0;
354
355         clear_msr_range(MSR_P6_EVNTSEL0, 2);
356         clear_msr_range(MSR_P6_PERFCTR0, 2);
357
358         evntsel = P6_EVNTSEL_INT
359                 | P6_EVNTSEL_OS
360                 | P6_EVNTSEL_USR
361                 | P6_NMI_EVENT;
362
363         wrmsr(MSR_P6_EVNTSEL0, evntsel, 0);
364         Dprintk("setting P6_PERFCTR0 to %08lx\n", -(cpu_khz/nmi_hz*1000));
365         wrmsr(MSR_P6_PERFCTR0, -(cpu_khz/nmi_hz*1000), 0);
366         apic_write(APIC_LVTPC, APIC_DM_NMI);
367         evntsel |= P6_EVNTSEL0_ENABLE;
368         wrmsr(MSR_P6_EVNTSEL0, evntsel, 0);
369 }
370
371 static int setup_p4_watchdog(void)
372 {
373         unsigned int misc_enable, dummy;
374
375         rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy);
376         if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
377                 return 0;
378
379         nmi_perfctr_msr = MSR_P4_IQ_COUNTER0;
380         nmi_p4_cccr_val = P4_NMI_IQ_CCCR0;
381 #ifdef CONFIG_SMP
382         if (smp_num_siblings == 2)
383                 nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1;
384 #endif
385
386         if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL))
387                 clear_msr_range(0x3F1, 2);
388         /* MSR 0x3F0 seems to have a default value of 0xFC00, but current
389            docs doesn't fully define it, so leave it alone for now. */
390         if (boot_cpu_data.x86_model >= 0x3) {
391                 /* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */
392                 clear_msr_range(0x3A0, 26);
393                 clear_msr_range(0x3BC, 3);
394         } else {
395                 clear_msr_range(0x3A0, 31);
396         }
397         clear_msr_range(0x3C0, 6);
398         clear_msr_range(0x3C8, 6);
399         clear_msr_range(0x3E0, 2);
400         clear_msr_range(MSR_P4_CCCR0, 18);
401         clear_msr_range(MSR_P4_PERFCTR0, 18);
402
403         wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0);
404         wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0);
405         Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz/nmi_hz*1000));
406         wrmsr(MSR_P4_IQ_COUNTER0, -(cpu_khz/nmi_hz*1000), -1);
407         apic_write(APIC_LVTPC, APIC_DM_NMI);
408         wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
409         return 1;
410 }
411
412 void setup_apic_nmi_watchdog (void)
413 {
414         switch (boot_cpu_data.x86_vendor) {
415         case X86_VENDOR_AMD:
416                 if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15)
417                         return;
418                 setup_k7_watchdog();
419                 break;
420         case X86_VENDOR_INTEL:
421                 switch (boot_cpu_data.x86) {
422                 case 6:
423                         if (boot_cpu_data.x86_model > 0xd)
424                                 return;
425
426                         setup_p6_watchdog();
427                         break;
428                 case 15:
429                         if (boot_cpu_data.x86_model > 0x3)
430                                 return;
431
432                         if (!setup_p4_watchdog())
433                                 return;
434                         break;
435                 default:
436                         return;
437                 }
438                 break;
439         default:
440                 return;
441         }
442         lapic_nmi_owner = LAPIC_NMI_WATCHDOG;
443         nmi_active = 1;
444 }
445
446 /*
447  * the best way to detect whether a CPU has a 'hard lockup' problem
448  * is to check it's local APIC timer IRQ counts. If they are not
449  * changing then that CPU has some problem.
450  *
451  * as these watchdog NMI IRQs are generated on every CPU, we only
452  * have to check the current processor.
453  *
454  * since NMIs don't listen to _any_ locks, we have to be extremely
455  * careful not to rely on unsafe variables. The printk might lock
456  * up though, so we have to break up any console locks first ...
457  * [when there will be more tty-related locks, break them up
458  *  here too!]
459  */
460
461 static unsigned int
462         last_irq_sums [NR_CPUS],
463         alert_counter [NR_CPUS];
464
465 void touch_nmi_watchdog (void)
466 {
467         int i;
468
469         /*
470          * Just reset the alert counters, (other CPUs might be
471          * spinning on locks we hold):
472          */
473         for (i = 0; i < NR_CPUS; i++)
474                 alert_counter[i] = 0;
475 }
476
477 extern void die_nmi(struct pt_regs *, const char *msg);
478
479 void nmi_watchdog_tick (struct pt_regs * regs)
480 {
481
482         /*
483          * Since current_thread_info()-> is always on the stack, and we
484          * always switch the stack NMI-atomically, it's safe to use
485          * smp_processor_id().
486          */
487         int sum, cpu = smp_processor_id();
488
489         sum = per_cpu(irq_stat, cpu).apic_timer_irqs;
490
491         if (last_irq_sums[cpu] == sum) {
492                 /*
493                  * Ayiee, looks like this CPU is stuck ...
494                  * wait a few IRQs (5 seconds) before doing the oops ...
495                  */
496                 alert_counter[cpu]++;
497                 if (alert_counter[cpu] == 5*nmi_hz)
498                         die_nmi(regs, "NMI Watchdog detected LOCKUP");
499         } else {
500                 last_irq_sums[cpu] = sum;
501                 alert_counter[cpu] = 0;
502         }
503         if (nmi_perfctr_msr) {
504                 if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) {
505                         /*
506                          * P4 quirks:
507                          * - An overflown perfctr will assert its interrupt
508                          *   until the OVF flag in its CCCR is cleared.
509                          * - LVTPC is masked on interrupt and must be
510                          *   unmasked by the LVTPC handler.
511                          */
512                         wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
513                         apic_write(APIC_LVTPC, APIC_DM_NMI);
514                 }
515                 else if (nmi_perfctr_msr == MSR_P6_PERFCTR0) {
516                         /* Only P6 based Pentium M need to re-unmask
517                          * the apic vector but it doesn't hurt
518                          * other P6 variant */
519                         apic_write(APIC_LVTPC, APIC_DM_NMI);
520                 }
521                 wrmsr(nmi_perfctr_msr, -(cpu_khz/nmi_hz*1000), -1);
522         }
523 }
524
525 #ifdef CONFIG_SYSCTL
526
527 static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
528 {
529         unsigned char reason = get_nmi_reason();
530         char buf[64];
531
532         if (!(reason & 0xc0)) {
533                 sprintf(buf, "NMI received for unknown reason %02x\n", reason);
534                 die_nmi(regs, buf);
535         }
536         return 0;
537 }
538
539 /*
540  * proc handler for /proc/sys/kernel/unknown_nmi_panic
541  */
542 int proc_unknown_nmi_panic(ctl_table *table, int write, struct file *file,
543                         void __user *buffer, size_t *length, loff_t *ppos)
544 {
545         int old_state;
546
547         old_state = unknown_nmi_panic;
548         proc_dointvec(table, write, file, buffer, length, ppos);
549         if (!!old_state == !!unknown_nmi_panic)
550                 return 0;
551
552         if (unknown_nmi_panic) {
553                 if (reserve_lapic_nmi() < 0) {
554                         unknown_nmi_panic = 0;
555                         return -EBUSY;
556                 } else {
557                         set_nmi_callback(unknown_nmi_panic_callback);
558                 }
559         } else {
560                 release_lapic_nmi();
561                 unset_nmi_callback();
562         }
563         return 0;
564 }
565
566 #endif
567
568 EXPORT_SYMBOL(nmi_active);
569 EXPORT_SYMBOL(nmi_watchdog);
570 EXPORT_SYMBOL(reserve_lapic_nmi);
571 EXPORT_SYMBOL(release_lapic_nmi);
572 EXPORT_SYMBOL(disable_timer_nmi_watchdog);
573 EXPORT_SYMBOL(enable_timer_nmi_watchdog);