VServer 1.9.2 (patch-2.6.8.1-vs1.9.2.diff)
[linux-2.6.git] / arch / ppc / platforms / pmac_setup.c
1 /*
2  *  arch/ppc/platforms/setup.c
3  *
4  *  PowerPC version
5  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
6  *
7  *  Adapted for Power Macintosh by Paul Mackerras
8  *    Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
9  *
10  *  Derived from "arch/alpha/kernel/setup.c"
11  *    Copyright (C) 1995 Linus Torvalds
12  *
13  *  Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org)
14  *
15  *  This program is free software; you can redistribute it and/or
16  *  modify it under the terms of the GNU General Public License
17  *  as published by the Free Software Foundation; either version
18  *  2 of the License, or (at your option) any later version.
19  *
20  */
21
22 /*
23  * bootup setup stuff..
24  */
25
26 #include <linux/config.h>
27 #include <linux/init.h>
28 #include <linux/errno.h>
29 #include <linux/sched.h>
30 #include <linux/kernel.h>
31 #include <linux/mm.h>
32 #include <linux/stddef.h>
33 #include <linux/unistd.h>
34 #include <linux/ptrace.h>
35 #include <linux/slab.h>
36 #include <linux/user.h>
37 #include <linux/a.out.h>
38 #include <linux/tty.h>
39 #include <linux/string.h>
40 #include <linux/delay.h>
41 #include <linux/ioport.h>
42 #include <linux/major.h>
43 #include <linux/initrd.h>
44 #include <linux/vt_kern.h>
45 #include <linux/console.h>
46 #include <linux/ide.h>
47 #include <linux/pci.h>
48 #include <linux/adb.h>
49 #include <linux/cuda.h>
50 #include <linux/pmu.h>
51 #include <linux/irq.h>
52 #include <linux/seq_file.h>
53 #include <linux/root_dev.h>
54
55 #include <asm/reg.h>
56 #include <asm/sections.h>
57 #include <asm/prom.h>
58 #include <asm/system.h>
59 #include <asm/pgtable.h>
60 #include <asm/bitops.h>
61 #include <asm/io.h>
62 #include <asm/pci-bridge.h>
63 #include <asm/ohare.h>
64 #include <asm/mediabay.h>
65 #include <asm/machdep.h>
66 #include <asm/dma.h>
67 #include <asm/bootx.h>
68 #include <asm/cputable.h>
69 #include <asm/btext.h>
70 #include <asm/pmac_feature.h>
71 #include <asm/time.h>
72 #include <asm/of_device.h>
73 #include "pmac_pic.h"
74 #include "mem_pieces.h"
75
76 #undef SHOW_GATWICK_IRQS
77
78 extern long pmac_time_init(void);
79 extern unsigned long pmac_get_rtc_time(void);
80 extern int pmac_set_rtc_time(unsigned long nowtime);
81 extern void pmac_read_rtc_time(void);
82 extern void pmac_calibrate_decr(void);
83 extern void pmac_pcibios_fixup(void);
84 extern void pmac_find_bridges(void);
85 extern unsigned long pmac_ide_get_base(int index);
86 extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
87         unsigned long data_port, unsigned long ctrl_port, int *irq);
88
89 extern void pmac_nvram_update(void);
90 extern unsigned char pmac_nvram_read_byte(int addr);
91 extern void pmac_nvram_write_byte(int addr, unsigned char val);
92 extern int pmac_pci_enable_device_hook(struct pci_dev *dev, int initial);
93 extern void pmac_pcibios_after_init(void);
94 extern int of_show_percpuinfo(struct seq_file *m, int i);
95
96 struct device_node *memory_node;
97
98 unsigned char drive_info;
99
100 int ppc_override_l2cr = 0;
101 int ppc_override_l2cr_value;
102 int has_l2cache = 0;
103
104 static int current_root_goodness = -1;
105
106 extern int pmac_newworld;
107
108 #define DEFAULT_ROOT_DEVICE Root_SDA1   /* sda1 - slightly silly choice */
109
110 extern void zs_kgdb_hook(int tty_num);
111 static void ohare_init(void);
112 #ifdef CONFIG_BOOTX_TEXT
113 void pmac_progress(char *s, unsigned short hex);
114 #endif
115
116 sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN;
117
118 #ifdef CONFIG_SMP
119 extern struct smp_ops_t psurge_smp_ops;
120 extern struct smp_ops_t core99_smp_ops;
121 #endif /* CONFIG_SMP */
122
123 int __pmac
124 pmac_show_cpuinfo(struct seq_file *m)
125 {
126         struct device_node *np;
127         char *pp;
128         int plen;
129         int mbmodel = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
130                 NULL, PMAC_MB_INFO_MODEL, 0);
131         unsigned int mbflags = (unsigned int)pmac_call_feature(PMAC_FTR_GET_MB_INFO,
132                 NULL, PMAC_MB_INFO_FLAGS, 0);
133         char* mbname;
134
135         if (pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, PMAC_MB_INFO_NAME, (int)&mbname) != 0)
136                 mbname = "Unknown";
137
138         /* find motherboard type */
139         seq_printf(m, "machine\t\t: ");
140         np = find_devices("device-tree");
141         if (np != NULL) {
142                 pp = (char *) get_property(np, "model", NULL);
143                 if (pp != NULL)
144                         seq_printf(m, "%s\n", pp);
145                 else
146                         seq_printf(m, "PowerMac\n");
147                 pp = (char *) get_property(np, "compatible", &plen);
148                 if (pp != NULL) {
149                         seq_printf(m, "motherboard\t:");
150                         while (plen > 0) {
151                                 int l = strlen(pp) + 1;
152                                 seq_printf(m, " %s", pp);
153                                 plen -= l;
154                                 pp += l;
155                         }
156                         seq_printf(m, "\n");
157                 }
158         } else
159                 seq_printf(m, "PowerMac\n");
160
161         /* print parsed model */
162         seq_printf(m, "detected as\t: %d (%s)\n", mbmodel, mbname);
163         seq_printf(m, "pmac flags\t: %08x\n", mbflags);
164
165         /* find l2 cache info */
166         np = find_devices("l2-cache");
167         if (np == 0)
168                 np = find_type_devices("cache");
169         if (np != 0) {
170                 unsigned int *ic = (unsigned int *)
171                         get_property(np, "i-cache-size", NULL);
172                 unsigned int *dc = (unsigned int *)
173                         get_property(np, "d-cache-size", NULL);
174                 seq_printf(m, "L2 cache\t:");
175                 has_l2cache = 1;
176                 if (get_property(np, "cache-unified", NULL) != 0 && dc) {
177                         seq_printf(m, " %dK unified", *dc / 1024);
178                 } else {
179                         if (ic)
180                                 seq_printf(m, " %dK instruction", *ic / 1024);
181                         if (dc)
182                                 seq_printf(m, "%s %dK data",
183                                            (ic? " +": ""), *dc / 1024);
184                 }
185                 pp = get_property(np, "ram-type", NULL);
186                 if (pp)
187                         seq_printf(m, " %s", pp);
188                 seq_printf(m, "\n");
189         }
190
191         /* find ram info */
192         np = find_devices("memory");
193         if (np != 0) {
194                 int n;
195                 struct reg_property *reg = (struct reg_property *)
196                         get_property(np, "reg", &n);
197
198                 if (reg != 0) {
199                         unsigned long total = 0;
200
201                         for (n /= sizeof(struct reg_property); n > 0; --n)
202                                 total += (reg++)->size;
203                         seq_printf(m, "memory\t\t: %luMB\n", total >> 20);
204                 }
205         }
206
207         /* Checks "l2cr-value" property in the registry */
208         np = find_devices("cpus");
209         if (np == 0)
210                 np = find_type_devices("cpu");
211         if (np != 0) {
212                 unsigned int *l2cr = (unsigned int *)
213                         get_property(np, "l2cr-value", NULL);
214                 if (l2cr != 0) {
215                         seq_printf(m, "l2cr override\t: 0x%x\n", *l2cr);
216                 }
217         }
218
219         /* Indicate newworld/oldworld */
220         seq_printf(m, "pmac-generation\t: %s\n",
221                    pmac_newworld ? "NewWorld" : "OldWorld");
222
223
224         return 0;
225 }
226
227 int __openfirmware
228 pmac_show_percpuinfo(struct seq_file *m, int i)
229 {
230 #ifdef CONFIG_CPU_FREQ_PMAC
231         extern unsigned int pmac_get_one_cpufreq(int i);
232         unsigned int freq = pmac_get_one_cpufreq(i);
233         if (freq != 0) {
234                 seq_printf(m, "clock\t\t: %dMHz\n", freq/1000);
235                 return 0;
236         }
237 #endif /* CONFIG_CPU_FREQ_PMAC */
238         return of_show_percpuinfo(m, i);
239 }
240
241 static volatile u32 *sysctrl_regs;
242
243 void __init
244 pmac_setup_arch(void)
245 {
246         struct device_node *cpu;
247         int *fp;
248         unsigned long pvr;
249
250         pvr = PVR_VER(mfspr(PVR));
251
252         /* Set loops_per_jiffy to a half-way reasonable value,
253            for use until calibrate_delay gets called. */
254         cpu = find_type_devices("cpu");
255         if (cpu != 0) {
256                 fp = (int *) get_property(cpu, "clock-frequency", NULL);
257                 if (fp != 0) {
258                         if (pvr == 4 || pvr >= 8)
259                                 /* 604, G3, G4 etc. */
260                                 loops_per_jiffy = *fp / HZ;
261                         else
262                                 /* 601, 603, etc. */
263                                 loops_per_jiffy = *fp / (2*HZ);
264                 } else
265                         loops_per_jiffy = 50000000 / HZ;
266         }
267
268         /* this area has the CPU identification register
269            and some registers used by smp boards */
270         sysctrl_regs = (volatile u32 *) ioremap(0xf8000000, 0x1000);
271         ohare_init();
272
273         /* Lookup PCI hosts */
274         pmac_find_bridges();
275
276         /* Checks "l2cr-value" property in the registry */
277         if (cur_cpu_spec[0]->cpu_features & CPU_FTR_L2CR) {
278                 struct device_node *np = find_devices("cpus");
279                 if (np == 0)
280                         np = find_type_devices("cpu");
281                 if (np != 0) {
282                         unsigned int *l2cr = (unsigned int *)
283                                 get_property(np, "l2cr-value", NULL);
284                         if (l2cr != 0) {
285                                 ppc_override_l2cr = 1;
286                                 ppc_override_l2cr_value = *l2cr;
287                                 _set_L2CR(0);
288                                 _set_L2CR(ppc_override_l2cr_value);
289                         }
290                 }
291         }
292
293         if (ppc_override_l2cr)
294                 printk(KERN_INFO "L2CR overriden (0x%x), backside cache is %s\n",
295                         ppc_override_l2cr_value, (ppc_override_l2cr_value & 0x80000000)
296                                 ? "enabled" : "disabled");
297
298 #ifdef CONFIG_KGDB
299         zs_kgdb_hook(0);
300 #endif
301
302 #ifdef CONFIG_ADB_CUDA
303         find_via_cuda();
304 #else
305         if (find_devices("via-cuda")) {
306                 printk("WARNING ! Your machine is Cuda based but your kernel\n");
307                 printk("          wasn't compiled with CONFIG_ADB_CUDA option !\n");
308         }
309 #endif
310 #ifdef CONFIG_ADB_PMU
311         find_via_pmu();
312 #else
313         if (find_devices("via-pmu")) {
314                 printk("WARNING ! Your machine is PMU based but your kernel\n");
315                 printk("          wasn't compiled with CONFIG_ADB_PMU option !\n");
316         }
317 #endif
318 #ifdef CONFIG_NVRAM
319         pmac_nvram_init();
320 #endif
321 #ifdef CONFIG_DUMMY_CONSOLE
322         conswitchp = &dummy_con;
323 #endif
324 #ifdef CONFIG_BLK_DEV_INITRD
325         if (initrd_start)
326                 ROOT_DEV = Root_RAM0;
327         else
328 #endif
329                 ROOT_DEV = DEFAULT_ROOT_DEVICE;
330
331 #ifdef CONFIG_SMP
332         /* Check for Core99 */
333         if (find_devices("uni-n") || find_devices("u3"))
334                 ppc_md.smp_ops = &core99_smp_ops;
335         else
336                 ppc_md.smp_ops = &psurge_smp_ops;
337 #endif /* CONFIG_SMP */
338
339         pci_create_OF_bus_map();
340 }
341
342 static void __init ohare_init(void)
343 {
344         /*
345          * Turn on the L2 cache.
346          * We assume that we have a PSX memory controller iff
347          * we have an ohare I/O controller.
348          */
349         if (find_devices("ohare") != NULL) {
350                 if (((sysctrl_regs[2] >> 24) & 0xf) >= 3) {
351                         if (sysctrl_regs[4] & 0x10)
352                                 sysctrl_regs[4] |= 0x04000020;
353                         else
354                                 sysctrl_regs[4] |= 0x04000000;
355                         if(has_l2cache)
356                                 printk(KERN_INFO "Level 2 cache enabled\n");
357                 }
358         }
359 }
360
361 extern char *bootpath;
362 extern char *bootdevice;
363 void *boot_host;
364 int boot_target;
365 int boot_part;
366 extern dev_t boot_dev;
367
368 #ifdef CONFIG_SCSI
369 void __init
370 note_scsi_host(struct device_node *node, void *host)
371 {
372         int l;
373         char *p;
374
375         l = strlen(node->full_name);
376         if (bootpath != NULL && bootdevice != NULL
377             && strncmp(node->full_name, bootdevice, l) == 0
378             && (bootdevice[l] == '/' || bootdevice[l] == 0)) {
379                 boot_host = host;
380                 /*
381                  * There's a bug in OF 1.0.5.  (Why am I not surprised.)
382                  * If you pass a path like scsi/sd@1:0 to canon, it returns
383                  * something like /bandit@F2000000/gc@10/53c94@10000/sd@0,0
384                  * That is, the scsi target number doesn't get preserved.
385                  * So we pick the target number out of bootpath and use that.
386                  */
387                 p = strstr(bootpath, "/sd@");
388                 if (p != NULL) {
389                         p += 4;
390                         boot_target = simple_strtoul(p, NULL, 10);
391                         p = strchr(p, ':');
392                         if (p != NULL)
393                                 boot_part = simple_strtoul(p + 1, NULL, 10);
394                 }
395         }
396 }
397 #endif
398
399 #if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC)
400 static dev_t __init
401 find_ide_boot(void)
402 {
403         char *p;
404         int n;
405         dev_t __init pmac_find_ide_boot(char *bootdevice, int n);
406
407         if (bootdevice == NULL)
408                 return 0;
409         p = strrchr(bootdevice, '/');
410         if (p == NULL)
411                 return 0;
412         n = p - bootdevice;
413
414         return pmac_find_ide_boot(bootdevice, n);
415 }
416 #endif /* CONFIG_BLK_DEV_IDE && CONFIG_BLK_DEV_IDE_PMAC */
417
418 void __init
419 find_boot_device(void)
420 {
421 #if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC)
422         boot_dev = find_ide_boot();
423 #endif
424 }
425
426 static int initializing = 1;
427
428 static int pmac_late_init(void)
429 {
430         initializing = 0;
431         return 0;
432 }
433
434 late_initcall(pmac_late_init);
435
436 /* can't be __init - can be called whenever a disk is first accessed */
437 void __pmac
438 note_bootable_part(dev_t dev, int part, int goodness)
439 {
440         static int found_boot = 0;
441         char *p;
442
443         if (!initializing)
444                 return;
445         if ((goodness <= current_root_goodness) &&
446             ROOT_DEV != DEFAULT_ROOT_DEVICE)
447                 return;
448         p = strstr(saved_command_line, "root=");
449         if (p != NULL && (p == saved_command_line || p[-1] == ' '))
450                 return;
451
452         if (!found_boot) {
453                 find_boot_device();
454                 found_boot = 1;
455         }
456         if (!boot_dev || dev == boot_dev) {
457                 ROOT_DEV = dev + part;
458                 boot_dev = 0;
459                 current_root_goodness = goodness;
460         }
461 }
462
463 void __pmac
464 pmac_restart(char *cmd)
465 {
466 #ifdef CONFIG_ADB_CUDA
467         struct adb_request req;
468 #endif /* CONFIG_ADB_CUDA */
469
470         switch (sys_ctrler) {
471 #ifdef CONFIG_ADB_CUDA
472         case SYS_CTRLER_CUDA:
473                 cuda_request(&req, NULL, 2, CUDA_PACKET,
474                              CUDA_RESET_SYSTEM);
475                 for (;;)
476                         cuda_poll();
477                 break;
478 #endif /* CONFIG_ADB_CUDA */
479 #ifdef CONFIG_ADB_PMU
480         case SYS_CTRLER_PMU:
481                 pmu_restart();
482                 break;
483 #endif /* CONFIG_ADB_PMU */
484         default: ;
485         }
486 }
487
488 void __pmac
489 pmac_power_off(void)
490 {
491 #ifdef CONFIG_ADB_CUDA
492         struct adb_request req;
493 #endif /* CONFIG_ADB_CUDA */
494
495         switch (sys_ctrler) {
496 #ifdef CONFIG_ADB_CUDA
497         case SYS_CTRLER_CUDA:
498                 cuda_request(&req, NULL, 2, CUDA_PACKET,
499                              CUDA_POWERDOWN);
500                 for (;;)
501                         cuda_poll();
502                 break;
503 #endif /* CONFIG_ADB_CUDA */
504 #ifdef CONFIG_ADB_PMU
505         case SYS_CTRLER_PMU:
506                 pmu_shutdown();
507                 break;
508 #endif /* CONFIG_ADB_PMU */
509         default: ;
510         }
511 }
512
513 void __pmac
514 pmac_halt(void)
515 {
516    pmac_power_off();
517 }
518
519 /*
520  * Read in a property describing some pieces of memory.
521  */
522
523 static int __init
524 get_mem_prop(char *name, struct mem_pieces *mp)
525 {
526         struct reg_property *rp;
527         int i, s;
528         unsigned int *ip;
529         int nac = prom_n_addr_cells(memory_node);
530         int nsc = prom_n_size_cells(memory_node);
531
532         ip = (unsigned int *) get_property(memory_node, name, &s);
533         if (ip == NULL) {
534                 printk(KERN_ERR "error: couldn't get %s property on /memory\n",
535                        name);
536                 return 0;
537         }
538         s /= (nsc + nac) * 4;
539         rp = mp->regions;
540         for (i = 0; i < s; ++i, ip += nac+nsc) {
541                 if (nac >= 2 && ip[nac-2] != 0)
542                         continue;
543                 rp->address = ip[nac-1];
544                 if (nsc >= 2 && ip[nac+nsc-2] != 0)
545                         rp->size = ~0U;
546                 else
547                         rp->size = ip[nac+nsc-1];
548                 ++rp;
549         }
550         mp->n_regions = rp - mp->regions;
551
552         /* Make sure the pieces are sorted. */
553         mem_pieces_sort(mp);
554         mem_pieces_coalesce(mp);
555         return 1;
556 }
557
558 /*
559  * On systems with Open Firmware, collect information about
560  * physical RAM and which pieces are already in use.
561  * At this point, we have (at least) the first 8MB mapped with a BAT.
562  * Our text, data, bss use something over 1MB, starting at 0.
563  * Open Firmware may be using 1MB at the 4MB point.
564  */
565 unsigned long __init
566 pmac_find_end_of_memory(void)
567 {
568         unsigned long a, total;
569         struct mem_pieces phys_mem;
570
571         /*
572          * Find out where physical memory is, and check that it
573          * starts at 0 and is contiguous.  It seems that RAM is
574          * always physically contiguous on Power Macintoshes.
575          *
576          * Supporting discontiguous physical memory isn't hard,
577          * it just makes the virtual <-> physical mapping functions
578          * more complicated (or else you end up wasting space
579          * in mem_map).
580          */
581         memory_node = find_devices("memory");
582         if (memory_node == NULL || !get_mem_prop("reg", &phys_mem)
583             || phys_mem.n_regions == 0)
584                 panic("No RAM??");
585         a = phys_mem.regions[0].address;
586         if (a != 0)
587                 panic("RAM doesn't start at physical address 0");
588         total = phys_mem.regions[0].size;
589
590         if (phys_mem.n_regions > 1) {
591                 printk("RAM starting at 0x%x is not contiguous\n",
592                        phys_mem.regions[1].address);
593                 printk("Using RAM from 0 to 0x%lx\n", total-1);
594         }
595
596         return total;
597 }
598
599 void __init
600 pmac_init(unsigned long r3, unsigned long r4, unsigned long r5,
601           unsigned long r6, unsigned long r7)
602 {
603         /* isa_io_base gets set in pmac_find_bridges */
604         isa_mem_base = PMAC_ISA_MEM_BASE;
605         pci_dram_offset = PMAC_PCI_DRAM_OFFSET;
606         ISA_DMA_THRESHOLD = ~0L;
607         DMA_MODE_READ = 1;
608         DMA_MODE_WRITE = 2;
609
610         ppc_md.setup_arch     = pmac_setup_arch;
611         ppc_md.show_cpuinfo   = pmac_show_cpuinfo;
612         ppc_md.show_percpuinfo = pmac_show_percpuinfo;
613         ppc_md.irq_canonicalize = NULL;
614         ppc_md.init_IRQ       = pmac_pic_init;
615         ppc_md.get_irq        = pmac_get_irq; /* Changed later on ... */
616
617         ppc_md.pcibios_fixup  = pmac_pcibios_fixup;
618         ppc_md.pcibios_enable_device_hook = pmac_pci_enable_device_hook;
619         ppc_md.pcibios_after_init = pmac_pcibios_after_init;
620
621         ppc_md.restart        = pmac_restart;
622         ppc_md.power_off      = pmac_power_off;
623         ppc_md.halt           = pmac_halt;
624
625         ppc_md.time_init      = pmac_time_init;
626         ppc_md.set_rtc_time   = pmac_set_rtc_time;
627         ppc_md.get_rtc_time   = pmac_get_rtc_time;
628         ppc_md.calibrate_decr = pmac_calibrate_decr;
629
630         ppc_md.find_end_of_memory = pmac_find_end_of_memory;
631
632         ppc_md.feature_call   = pmac_do_feature_call;
633
634 #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
635 #ifdef CONFIG_BLK_DEV_IDE_PMAC
636         ppc_ide_md.ide_init_hwif        = pmac_ide_init_hwif_ports;
637         ppc_ide_md.default_io_base      = pmac_ide_get_base;
638 #endif /* CONFIG_BLK_DEV_IDE_PMAC */
639 #endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */
640
641 #ifdef CONFIG_BOOTX_TEXT
642         ppc_md.progress = pmac_progress;
643 #endif /* CONFIG_BOOTX_TEXT */
644
645         if (ppc_md.progress) ppc_md.progress("pmac_init(): exit", 0);
646
647 }
648
649 #ifdef CONFIG_BOOTX_TEXT
650 void __init
651 pmac_progress(char *s, unsigned short hex)
652 {
653         if (boot_text_mapped) {
654                 btext_drawstring(s);
655                 btext_drawchar('\n');
656         }
657 }
658 #endif /* CONFIG_BOOTX_TEXT */
659
660 static int __init
661 pmac_declare_of_platform_devices(void)
662 {
663         struct device_node *np;
664
665         np = find_devices("uni-n");
666         if (np) {
667                 for (np = np->child; np != NULL; np = np->sibling)
668                         if (strncmp(np->name, "i2c", 3) == 0) {
669                                 of_platform_device_create(np, "uni-n-i2c");
670                                 break;
671                         }
672         }
673         np = find_devices("u3");
674         if (np) {
675                 for (np = np->child; np != NULL; np = np->sibling)
676                         if (strncmp(np->name, "i2c", 3) == 0) {
677                                 of_platform_device_create(np, "u3-i2c");
678                                 break;
679                         }
680         }
681
682         np = find_devices("valkyrie");
683         if (np)
684                 of_platform_device_create(np, "valkyrie");
685         np = find_devices("platinum");
686         if (np)
687                 of_platform_device_create(np, "platinum");
688
689         return 0;
690 }
691
692 device_initcall(pmac_declare_of_platform_devices);