drivers/acpi/executer/exstore.c

   1
   2 /******************************************************************************
   3  *
   4  * Module Name: exstore - AML Interpreter object store support
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2005, R. Byron Moore
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45
  46 #include <acpi/acpi.h>
  47 #include <acpi/acdispat.h>
  48 #include <acpi/acinterp.h>
  49 #include <acpi/amlcode.h>
  50 #include <acpi/acnamesp.h>
  51
  52
  53 #define _COMPONENT          ACPI_EXECUTER
  54          ACPI_MODULE_NAME    ("exstore")
  55
  56
  57 /*******************************************************************************
  58  *
  59  * FUNCTION:    acpi_ex_store
  60  *
  61  * PARAMETERS:  *source_desc        - Value to be stored
  62  *              *dest_desc          - Where to store it.  Must be an NS node
  63  *                                    or an union acpi_operand_object of type
  64  *                                    Reference;
  65  *              walk_state          - Current walk state
  66  *
  67  * RETURN:      Status
  68  *
  69  * DESCRIPTION: Store the value described by source_desc into the location
  70  *              described by dest_desc. Called by various interpreter
  71  *              functions to store the result of an operation into
  72  *              the destination operand -- not just simply the actual "Store"
  73  *              ASL operator.
  74  *
  75  ******************************************************************************/
  76
  77 acpi_status
  78 acpi_ex_store (
  79         union acpi_operand_object       *source_desc,
  80         union acpi_operand_object       *dest_desc,
  81         struct acpi_walk_state          *walk_state)
  82 {
  83         acpi_status                     status = AE_OK;
  84         union acpi_operand_object       *ref_desc = dest_desc;
  85
  86
  87         ACPI_FUNCTION_TRACE_PTR ("ex_store", dest_desc);
  88
  89
  90         /* Validate parameters */
  91
  92         if (!source_desc || !dest_desc) {
  93                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null parameter\n"));
  94                 return_ACPI_STATUS (AE_AML_NO_OPERAND);
  95         }
  96
  97         /* dest_desc can be either a namespace node or an ACPI object */
  98
  99         if (ACPI_GET_DESCRIPTOR_TYPE (dest_desc) == ACPI_DESC_TYPE_NAMED) {
 100                 /*
 101                  * Dest is a namespace node,
 102                  * Storing an object into a Named node.
 103                  */
 104                 status = acpi_ex_store_object_to_node (source_desc,
 105                                  (struct acpi_namespace_node *) dest_desc, walk_state,
 106                                  ACPI_IMPLICIT_CONVERSION);
 107
 108                 return_ACPI_STATUS (status);
 109         }
 110
 111         /* Destination object must be a Reference or a Constant object */
 112
 113         switch (ACPI_GET_OBJECT_TYPE (dest_desc)) {
 114         case ACPI_TYPE_LOCAL_REFERENCE:
 115                 break;
 116
 117         case ACPI_TYPE_INTEGER:
 118
 119                 /* Allow stores to Constants -- a Noop as per ACPI spec */
 120
 121                 if (dest_desc->common.flags & AOPOBJ_AML_CONSTANT) {
 122                         return_ACPI_STATUS (AE_OK);
 123                 }
 124
 125                 /*lint -fallthrough */
 126
 127         default:
 128
 129                 /* Destination is not a Reference object */
 130
 131                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 132                         "Target is not a Reference or Constant object - %s [%p]\n",
 133                         acpi_ut_get_object_type_name (dest_desc), dest_desc));
 134
 135                 ACPI_DUMP_STACK_ENTRY (source_desc);
 136                 ACPI_DUMP_STACK_ENTRY (dest_desc);
 137                 ACPI_DUMP_OPERANDS (&dest_desc, ACPI_IMODE_EXECUTE, "ex_store",
 138                                   2, "Target is not a Reference or Constant object");
 139
 140                 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 141         }
 142
 143         /*
 144          * Examine the Reference opcode.  These cases are handled:
 145          *
 146          * 1) Store to Name (Change the object associated with a name)
 147          * 2) Store to an indexed area of a Buffer or Package
 148          * 3) Store to a Method Local or Arg
 149          * 4) Store to the debug object
 150          */
 151         switch (ref_desc->reference.opcode) {
 152         case AML_NAME_OP:
 153         case AML_REF_OF_OP:
 154
 155                 /* Storing an object into a Name "container" */
 156
 157                 status = acpi_ex_store_object_to_node (source_desc, ref_desc->reference.object,
 158                                   walk_state, ACPI_IMPLICIT_CONVERSION);
 159                 break;
 160
 161
 162         case AML_INDEX_OP:
 163
 164                 /* Storing to an Index (pointer into a packager or buffer) */
 165
 166                 status = acpi_ex_store_object_to_index (source_desc, ref_desc, walk_state);
 167                 break;
 168
 169
 170         case AML_LOCAL_OP:
 171         case AML_ARG_OP:
 172
 173                 /* Store to a method local/arg  */
 174
 175                 status = acpi_ds_store_object_to_local (ref_desc->reference.opcode,
 176                                   ref_desc->reference.offset, source_desc, walk_state);
 177                 break;
 178
 179
 180         case AML_DEBUG_OP:
 181
 182                 /*
 183                  * Storing to the Debug object causes the value stored to be
 184                  * displayed and otherwise has no effect -- see ACPI Specification
 185                  */
 186                 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
 187                         "**** Write to Debug Object: Object %p %s ****:\n\n",
 188                         source_desc, acpi_ut_get_object_type_name (source_desc)));
 189
 190                 ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[ACPI Debug] %s: ",
 191                         acpi_ut_get_object_type_name (source_desc)));
 192
 193                 if (!acpi_ut_valid_internal_object (source_desc)) {
 194                    ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT,
 195                            "%p, Invalid Internal Object!\n", source_desc));
 196                    break;
 197                 }
 198
 199                 switch (ACPI_GET_OBJECT_TYPE (source_desc)) {
 200                 case ACPI_TYPE_INTEGER:
 201
 202                         if (acpi_gbl_integer_byte_width == 4) {
 203                                 ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "0x%8.8X\n",
 204                                         (u32) source_desc->integer.value));
 205                         }
 206                         else {
 207                                 ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "0x%8.8X%8.8X\n",
 208                                         ACPI_FORMAT_UINT64 (source_desc->integer.value)));
 209                         }
 210                         break;
 211
 212
 213                 case ACPI_TYPE_BUFFER:
 214
 215                         ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[0x%.2X]",
 216                                 (u32) source_desc->buffer.length));
 217                         ACPI_DUMP_BUFFER (source_desc->buffer.pointer,
 218                                 (source_desc->buffer.length < 32) ? source_desc->buffer.length : 32);
 219                         break;
 220
 221
 222                 case ACPI_TYPE_STRING:
 223
 224                         ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[0x%.2X] \"%s\"\n",
 225                                 source_desc->string.length, source_desc->string.pointer));
 226                         break;
 227
 228
 229                 case ACPI_TYPE_PACKAGE:
 230
 231                         ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[0x%.2X] Elements Ptr - %p\n",
 232                                 source_desc->package.count, source_desc->package.elements));
 233                         break;
 234
 235
 236                 default:
 237
 238                         ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "%p\n",
 239                                 source_desc));
 240                         break;
 241                 }
 242
 243                 ACPI_DEBUG_PRINT_RAW ((ACPI_DB_EXEC, "\n"));
 244                 break;
 245
 246
 247         default:
 248
 249                 ACPI_REPORT_ERROR (("ex_store: Unknown Reference opcode %X\n",
 250                         ref_desc->reference.opcode));
 251                 ACPI_DUMP_ENTRY (ref_desc, ACPI_LV_ERROR);
 252
 253                 status = AE_AML_INTERNAL;
 254                 break;
 255         }
 256
 257         return_ACPI_STATUS (status);
 258 }
 259
 260
 261 /*******************************************************************************
 262  *
 263  * FUNCTION:    acpi_ex_store_object_to_index
 264  *
 265  * PARAMETERS:  *source_desc            - Value to be stored
 266  *              *dest_desc              - Named object to receive the value
 267  *              walk_state              - Current walk state
 268  *
 269  * RETURN:      Status
 270  *
 271  * DESCRIPTION: Store the object to indexed Buffer or Package element
 272  *
 273  ******************************************************************************/
 274
 275 acpi_status
 276 acpi_ex_store_object_to_index (
 277         union acpi_operand_object       *source_desc,
 278         union acpi_operand_object       *index_desc,
 279         struct acpi_walk_state          *walk_state)
 280 {
 281         acpi_status                     status = AE_OK;
 282         union acpi_operand_object       *obj_desc;
 283         union acpi_operand_object       *new_desc;
 284         u8                              value = 0;
 285         u32                             i;
 286
 287
 288         ACPI_FUNCTION_TRACE ("ex_store_object_to_index");
 289
 290
 291         /*
 292          * Destination must be a reference pointer, and
 293          * must point to either a buffer or a package
 294          */
 295         switch (index_desc->reference.target_type) {
 296         case ACPI_TYPE_PACKAGE:
 297                 /*
 298                  * Storing to a package element. Copy the object and replace
 299                  * any existing object with the new object. No implicit
 300                  * conversion is performed.
 301                  *
 302                  * The object at *(index_desc->Reference.Where) is the
 303                  * element within the package that is to be modified.
 304                  * The parent package object is at index_desc->Reference.Object
 305                  */
 306                 obj_desc = *(index_desc->reference.where);
 307
 308                 status = acpi_ut_copy_iobject_to_iobject (source_desc, &new_desc, walk_state);
 309                 if (ACPI_FAILURE (status)) {
 310                         return_ACPI_STATUS (status);
 311                 }
 312
 313                 if (obj_desc) {
 314                         /* Decrement reference count by the ref count of the parent package */
 315
 316                         for (i = 0; i < ((union acpi_operand_object *) index_desc->reference.object)->common.reference_count; i++) {
 317                                 acpi_ut_remove_reference (obj_desc);
 318                         }
 319                 }
 320
 321                 *(index_desc->reference.where) = new_desc;
 322
 323                 /* Increment reference count by the ref count of the parent package -1 */
 324
 325                 for (i = 1; i < ((union acpi_operand_object *) index_desc->reference.object)->common.reference_count; i++) {
 326                         acpi_ut_add_reference (new_desc);
 327                 }
 328
 329                 break;
 330
 331
 332         case ACPI_TYPE_BUFFER_FIELD:
 333
 334                 /*
 335                  * Store into a Buffer or String (not actually a real buffer_field)
 336                  * at a location defined by an Index.
 337                  *
 338                  * The first 8-bit element of the source object is written to the
 339                  * 8-bit Buffer location defined by the Index destination object,
 340                  * according to the ACPI 2.0 specification.
 341                  */
 342
 343                 /*
 344                  * Make sure the target is a Buffer or String. An error should
 345                  * not happen here, since the reference_object was constructed
 346                  * by the INDEX_OP code.
 347                  */
 348                 obj_desc = index_desc->reference.object;
 349                 if ((ACPI_GET_OBJECT_TYPE (obj_desc) != ACPI_TYPE_BUFFER) &&
 350                         (ACPI_GET_OBJECT_TYPE (obj_desc) != ACPI_TYPE_STRING)) {
 351                         return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 352                 }
 353
 354                 /*
 355                  * The assignment of the individual elements will be slightly
 356                  * different for each source type.
 357                  */
 358                 switch (ACPI_GET_OBJECT_TYPE (source_desc)) {
 359                 case ACPI_TYPE_INTEGER:
 360
 361                         /* Use the least-significant byte of the integer */
 362
 363                         value = (u8) (source_desc->integer.value);
 364                         break;
 365
 366                 case ACPI_TYPE_BUFFER:
 367                 case ACPI_TYPE_STRING:
 368
 369                         /* Note: Takes advantage of common string/buffer fields */
 370
 371                         value = source_desc->buffer.pointer[0];
 372                         break;
 373
 374                 default:
 375
 376                         /* All other types are invalid */
 377
 378                         ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 379                                 "Source must be Integer/Buffer/String type, not %s\n",
 380                                 acpi_ut_get_object_type_name (source_desc)));
 381                         return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 382                 }
 383
 384                 /* Store the source value into the target buffer byte */
 385
 386                 obj_desc->buffer.pointer[index_desc->reference.offset] = value;
 387                 break;
 388
 389
 390         default:
 391                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 392                         "Target is not a Package or buffer_field\n"));
 393                 status = AE_AML_OPERAND_TYPE;
 394                 break;
 395         }
 396
 397         return_ACPI_STATUS (status);
 398 }
 399
 400
 401 /*******************************************************************************
 402  *
 403  * FUNCTION:    acpi_ex_store_object_to_node
 404  *
 405  * PARAMETERS:  source_desc             - Value to be stored
 406  *              Node                    - Named object to receive the value
 407  *              walk_state              - Current walk state
 408  *              implicit_conversion     - Perform implicit conversion (yes/no)
 409  *
 410  * RETURN:      Status
 411  *
 412  * DESCRIPTION: Store the object to the named object.
 413  *
 414  *              The Assignment of an object to a named object is handled here
 415  *              The value passed in will replace the current value (if any)
 416  *              with the input value.
 417  *
 418  *              When storing into an object the data is converted to the
 419  *              target object type then stored in the object.  This means
 420  *              that the target object type (for an initialized target) will
 421  *              not be changed by a store operation.
 422  *
 423  *              Assumes parameters are already validated.
 424  *
 425  ******************************************************************************/
 426
 427 acpi_status
 428 acpi_ex_store_object_to_node (
 429         union acpi_operand_object       *source_desc,
 430         struct acpi_namespace_node      *node,
 431         struct acpi_walk_state          *walk_state,
 432         u8                              implicit_conversion)
 433 {
 434         acpi_status                     status = AE_OK;
 435         union acpi_operand_object       *target_desc;
 436         union acpi_operand_object       *new_desc;
 437         acpi_object_type                target_type;
 438
 439
 440         ACPI_FUNCTION_TRACE_PTR ("ex_store_object_to_node", source_desc);
 441
 442
 443         /*
 444          * Get current type of the node, and object attached to Node
 445          */
 446         target_type = acpi_ns_get_type (node);
 447         target_desc = acpi_ns_get_attached_object (node);
 448
 449         ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Storing %p(%s) into node %p(%s)\n",
 450                 source_desc, acpi_ut_get_object_type_name (source_desc),
 451                           node, acpi_ut_get_type_name (target_type)));
 452
 453         /*
 454          * Resolve the source object to an actual value
 455          * (If it is a reference object)
 456          */
 457         status = acpi_ex_resolve_object (&source_desc, target_type, walk_state);
 458         if (ACPI_FAILURE (status)) {
 459                 return_ACPI_STATUS (status);
 460         }
 461
 462         /* If no implicit conversion, drop into the default case below */
 463
 464         if (!implicit_conversion) {
 465                 /* Force execution of default (no implicit conversion) */
 466
 467                 target_type = ACPI_TYPE_ANY;
 468         }
 469
 470         /*
 471          * Do the actual store operation
 472          */
 473         switch (target_type) {
 474         case ACPI_TYPE_BUFFER_FIELD:
 475         case ACPI_TYPE_LOCAL_REGION_FIELD:
 476         case ACPI_TYPE_LOCAL_BANK_FIELD:
 477         case ACPI_TYPE_LOCAL_INDEX_FIELD:
 478
 479                 /*
 480                  * For fields, copy the source data to the target field.
 481                  */
 482                 status = acpi_ex_write_data_to_field (source_desc, target_desc, &walk_state->result_obj);
 483                 break;
 484
 485
 486         case ACPI_TYPE_INTEGER:
 487         case ACPI_TYPE_STRING:
 488         case ACPI_TYPE_BUFFER:
 489
 490                 /*
 491                  * These target types are all of type Integer/String/Buffer, and
 492                  * therefore support implicit conversion before the store.
 493                  *
 494                  * Copy and/or convert the source object to a new target object
 495                  */
 496                 status = acpi_ex_store_object_to_object (source_desc, target_desc, &new_desc, walk_state);
 497                 if (ACPI_FAILURE (status)) {
 498                         return_ACPI_STATUS (status);
 499                 }
 500
 501                 if (new_desc != target_desc) {
 502                         /*
 503                          * Store the new new_desc as the new value of the Name, and set
 504                          * the Name's type to that of the value being stored in it.
 505                          * source_desc reference count is incremented by attach_object.
 506                          *
 507                          * Note: This may change the type of the node if an explicit store
 508                          * has been performed such that the node/object type has been
 509                          * changed.
 510                          */
 511                         status = acpi_ns_attach_object (node, new_desc, new_desc->common.type);
 512
 513                         ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
 514                                 "Store %s into %s via Convert/Attach\n",
 515                                 acpi_ut_get_object_type_name (source_desc),
 516                                 acpi_ut_get_object_type_name (new_desc)));
 517                 }
 518                 break;
 519
 520
 521         default:
 522
 523                 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
 524                         "Storing %s (%p) directly into node (%p), no implicit conversion\n",
 525                         acpi_ut_get_object_type_name (source_desc), source_desc, node));
 526
 527                 /* No conversions for all other types.  Just attach the source object */
 528
 529                 status = acpi_ns_attach_object (node, source_desc, ACPI_GET_OBJECT_TYPE (source_desc));
 530                 break;
 531         }
 532
 533         return_ACPI_STATUS (status);
 534 }
 535
 536