drivers/acpi/hardware/hwregs.c

   1
   2 /*******************************************************************************
   3  *
   4  * Module Name: hwregs - Read/write access functions for the various ACPI
   5  *                       control and status registers.
   6  *
   7  ******************************************************************************/
   8
   9 /*
  10  * Copyright (C) 2000 - 2005, R. Byron Moore
  11  * All rights reserved.
  12  *
  13  * Redistribution and use in source and binary forms, with or without
  14  * modification, are permitted provided that the following conditions
  15  * are met:
  16  * 1. Redistributions of source code must retain the above copyright
  17  *    notice, this list of conditions, and the following disclaimer,
  18  *    without modification.
  19  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  20  *    substantially similar to the "NO WARRANTY" disclaimer below
  21  *    ("Disclaimer") and any redistribution must be conditioned upon
  22  *    including a substantially similar Disclaimer requirement for further
  23  *    binary redistribution.
  24  * 3. Neither the names of the above-listed copyright holders nor the names
  25  *    of any contributors may be used to endorse or promote products derived
  26  *    from this software without specific prior written permission.
  27  *
  28  * Alternatively, this software may be distributed under the terms of the
  29  * GNU General Public License ("GPL") version 2 as published by the Free
  30  * Software Foundation.
  31  *
  32  * NO WARRANTY
  33  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  34  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  35  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  36  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  37  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  38  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  39  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  40  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  41  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  42  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  43  * POSSIBILITY OF SUCH DAMAGES.
  44  */
  45
  46 #include <linux/module.h>
  47
  48 #include <acpi/acpi.h>
  49 #include <acpi/acnamesp.h>
  50 #include <acpi/acevents.h>
  51
  52 #define _COMPONENT          ACPI_HARDWARE
  53          ACPI_MODULE_NAME    ("hwregs")
  54
  55
  56 /*******************************************************************************
  57  *
  58  * FUNCTION:    acpi_hw_clear_acpi_status
  59  *
  60  * PARAMETERS:  Flags           - Lock the hardware or not
  61  *
  62  * RETURN:      none
  63  *
  64  * DESCRIPTION: Clears all fixed and general purpose status bits
  65  *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
  66  *
  67  ******************************************************************************/
  68
  69 acpi_status
  70 acpi_hw_clear_acpi_status (
  71         u32                             flags)
  72 {
  73         acpi_status                     status;
  74
  75
  76         ACPI_FUNCTION_TRACE ("hw_clear_acpi_status");
  77
  78
  79         ACPI_DEBUG_PRINT ((ACPI_DB_IO, "About to write %04X to %04X\n",
  80                 ACPI_BITMASK_ALL_FIXED_STATUS,
  81                 (u16) acpi_gbl_FADT->xpm1a_evt_blk.address));
  82
  83         if (flags & ACPI_MTX_LOCK) {
  84                 status = acpi_ut_acquire_mutex (ACPI_MTX_HARDWARE);
  85                 if (ACPI_FAILURE (status)) {
  86                         return_ACPI_STATUS (status);
  87                 }
  88         }
  89
  90         status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS,
  91                           ACPI_BITMASK_ALL_FIXED_STATUS);
  92         if (ACPI_FAILURE (status)) {
  93                 goto unlock_and_exit;
  94         }
  95
  96         /* Clear the fixed events */
  97
  98         if (acpi_gbl_FADT->xpm1b_evt_blk.address) {
  99                 status = acpi_hw_low_level_write (16, ACPI_BITMASK_ALL_FIXED_STATUS,
 100                                  &acpi_gbl_FADT->xpm1b_evt_blk);
 101                 if (ACPI_FAILURE (status)) {
 102                         goto unlock_and_exit;
 103                 }
 104         }
 105
 106         /* Clear the GPE Bits in all GPE registers in all GPE blocks */
 107
 108         status = acpi_ev_walk_gpe_list (acpi_hw_clear_gpe_block, ACPI_ISR);
 109
 110 unlock_and_exit:
 111         if (flags & ACPI_MTX_LOCK) {
 112                 (void) acpi_ut_release_mutex (ACPI_MTX_HARDWARE);
 113         }
 114         return_ACPI_STATUS (status);
 115 }
 116
 117
 118 /*******************************************************************************
 119  *
 120  * FUNCTION:    acpi_get_sleep_type_data
 121  *
 122  * PARAMETERS:  sleep_state         - Numeric sleep state
 123  *              *sleep_type_a        - Where SLP_TYPa is returned
 124  *              *sleep_type_b        - Where SLP_TYPb is returned
 125  *
 126  * RETURN:      Status - ACPI status
 127  *
 128  * DESCRIPTION: Obtain the SLP_TYPa and SLP_TYPb values for the requested sleep
 129  *              state.
 130  *
 131  ******************************************************************************/
 132
 133 acpi_status
 134 acpi_get_sleep_type_data (
 135         u8                              sleep_state,
 136         u8                              *sleep_type_a,
 137         u8                              *sleep_type_b)
 138 {
 139         acpi_status                     status = AE_OK;
 140         struct acpi_parameter_info      info;
 141
 142
 143         ACPI_FUNCTION_TRACE ("acpi_get_sleep_type_data");
 144
 145
 146         /*
 147          * Validate parameters
 148          */
 149         if ((sleep_state > ACPI_S_STATES_MAX) ||
 150                 !sleep_type_a || !sleep_type_b) {
 151                 return_ACPI_STATUS (AE_BAD_PARAMETER);
 152         }
 153
 154         /*
 155          * Evaluate the namespace object containing the values for this state
 156          */
 157         info.parameters = NULL;
 158         status = acpi_ns_evaluate_by_name ((char *) acpi_gbl_sleep_state_names[sleep_state],
 159                           &info);
 160         if (ACPI_FAILURE (status)) {
 161                 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "%s while evaluating sleep_state [%s]\n",
 162                         acpi_format_exception (status), acpi_gbl_sleep_state_names[sleep_state]));
 163
 164                 return_ACPI_STATUS (status);
 165         }
 166
 167         /* Must have a return object */
 168
 169         if (!info.return_object) {
 170                 ACPI_REPORT_ERROR (("Missing Sleep State object\n"));
 171                 status = AE_NOT_EXIST;
 172         }
 173
 174         /* It must be of type Package */
 175
 176         else if (ACPI_GET_OBJECT_TYPE (info.return_object) != ACPI_TYPE_PACKAGE) {
 177                 ACPI_REPORT_ERROR (("Sleep State object not a Package\n"));
 178                 status = AE_AML_OPERAND_TYPE;
 179         }
 180
 181         /* The package must have at least two elements */
 182
 183         else if (info.return_object->package.count < 2) {
 184                 ACPI_REPORT_ERROR (("Sleep State package does not have at least two elements\n"));
 185                 status = AE_AML_NO_OPERAND;
 186         }
 187
 188         /* The first two elements must both be of type Integer */
 189
 190         else if ((ACPI_GET_OBJECT_TYPE (info.return_object->package.elements[0]) != ACPI_TYPE_INTEGER) ||
 191                          (ACPI_GET_OBJECT_TYPE (info.return_object->package.elements[1]) != ACPI_TYPE_INTEGER)) {
 192                 ACPI_REPORT_ERROR (("Sleep State package elements are not both Integers (%s, %s)\n",
 193                         acpi_ut_get_object_type_name (info.return_object->package.elements[0]),
 194                         acpi_ut_get_object_type_name (info.return_object->package.elements[1])));
 195                 status = AE_AML_OPERAND_TYPE;
 196         }
 197         else {
 198                 /*
 199                  * Valid _Sx_ package size, type, and value
 200                  */
 201                 *sleep_type_a = (u8) (info.return_object->package.elements[0])->integer.value;
 202                 *sleep_type_b = (u8) (info.return_object->package.elements[1])->integer.value;
 203         }
 204
 205         if (ACPI_FAILURE (status)) {
 206                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 207                         "While evaluating sleep_state [%s], bad Sleep object %p type %s\n",
 208                         acpi_gbl_sleep_state_names[sleep_state], info.return_object,
 209                         acpi_ut_get_object_type_name (info.return_object)));
 210         }
 211
 212         acpi_ut_remove_reference (info.return_object);
 213         return_ACPI_STATUS (status);
 214 }
 215 EXPORT_SYMBOL(acpi_get_sleep_type_data);
 216
 217
 218 /*******************************************************************************
 219  *
 220  * FUNCTION:    acpi_hw_get_register_bit_mask
 221  *
 222  * PARAMETERS:  register_id         - Index of ACPI Register to access
 223  *
 224  * RETURN:      The bit mask to be used when accessing the register
 225  *
 226  * DESCRIPTION: Map register_id into a register bit mask.
 227  *
 228  ******************************************************************************/
 229
 230 struct acpi_bit_register_info *
 231 acpi_hw_get_bit_register_info (
 232         u32                             register_id)
 233 {
 234         ACPI_FUNCTION_NAME ("hw_get_bit_register_info");
 235
 236
 237         if (register_id > ACPI_BITREG_MAX) {
 238                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Invalid bit_register ID: %X\n", register_id));
 239                 return (NULL);
 240         }
 241
 242         return (&acpi_gbl_bit_register_info[register_id]);
 243 }
 244
 245
 246 /*******************************************************************************
 247  *
 248  * FUNCTION:    acpi_get_register
 249  *
 250  * PARAMETERS:  register_id     - ID of ACPI bit_register to access
 251  *              return_value    - Value that was read from the register
 252  *              Flags           - Lock the hardware or not
 253  *
 254  * RETURN:      Status and the value read from specified Register.  Value
 255  *              returned is normalized to bit0 (is shifted all the way right)
 256  *
 257  * DESCRIPTION: ACPI bit_register read function.
 258  *
 259  ******************************************************************************/
 260
 261 acpi_status
 262 acpi_get_register (
 263         u32                             register_id,
 264         u32                             *return_value,
 265         u32                             flags)
 266 {
 267         u32                             register_value = 0;
 268         struct acpi_bit_register_info   *bit_reg_info;
 269         acpi_status                     status;
 270
 271
 272         ACPI_FUNCTION_TRACE ("acpi_get_register");
 273
 274
 275         /* Get the info structure corresponding to the requested ACPI Register */
 276
 277         bit_reg_info = acpi_hw_get_bit_register_info (register_id);
 278         if (!bit_reg_info) {
 279                 return_ACPI_STATUS (AE_BAD_PARAMETER);
 280         }
 281
 282         if (flags & ACPI_MTX_LOCK) {
 283                 status = acpi_ut_acquire_mutex (ACPI_MTX_HARDWARE);
 284                 if (ACPI_FAILURE (status)) {
 285                         return_ACPI_STATUS (status);
 286                 }
 287         }
 288
 289         /* Read from the register */
 290
 291         status = acpi_hw_register_read (ACPI_MTX_DO_NOT_LOCK,
 292                           bit_reg_info->parent_register, &register_value);
 293
 294         if (flags & ACPI_MTX_LOCK) {
 295                 (void) acpi_ut_release_mutex (ACPI_MTX_HARDWARE);
 296         }
 297
 298         if (ACPI_SUCCESS (status)) {
 299                 /* Normalize the value that was read */
 300
 301                 register_value = ((register_value & bit_reg_info->access_bit_mask)
 302                                    >> bit_reg_info->bit_position);
 303
 304                 *return_value = register_value;
 305
 306                 ACPI_DEBUG_PRINT ((ACPI_DB_IO, "Read value %8.8X register %X\n",
 307                                 register_value, bit_reg_info->parent_register));
 308         }
 309
 310         return_ACPI_STATUS (status);
 311 }
 312 EXPORT_SYMBOL(acpi_get_register);
 313
 314
 315 /*******************************************************************************
 316  *
 317  * FUNCTION:    acpi_set_register
 318  *
 319  * PARAMETERS:  register_id     - ID of ACPI bit_register to access
 320  *              Value           - (only used on write) value to write to the
 321  *                                Register, NOT pre-normalized to the bit pos
 322  *              Flags           - Lock the hardware or not
 323  *
 324  * RETURN:      Status
 325  *
 326  * DESCRIPTION: ACPI Bit Register write function.
 327  *
 328  ******************************************************************************/
 329
 330 acpi_status
 331 acpi_set_register (
 332         u32                             register_id,
 333         u32                             value,
 334         u32                             flags)
 335 {
 336         u32                             register_value = 0;
 337         struct acpi_bit_register_info   *bit_reg_info;
 338         acpi_status                     status;
 339
 340
 341         ACPI_FUNCTION_TRACE_U32 ("acpi_set_register", register_id);
 342
 343
 344         /* Get the info structure corresponding to the requested ACPI Register */
 345
 346         bit_reg_info = acpi_hw_get_bit_register_info (register_id);
 347         if (!bit_reg_info) {
 348                 ACPI_REPORT_ERROR (("Bad ACPI HW register_id: %X\n", register_id));
 349                 return_ACPI_STATUS (AE_BAD_PARAMETER);
 350         }
 351
 352         if (flags & ACPI_MTX_LOCK) {
 353                 status = acpi_ut_acquire_mutex (ACPI_MTX_HARDWARE);
 354                 if (ACPI_FAILURE (status)) {
 355                         return_ACPI_STATUS (status);
 356                 }
 357         }
 358
 359         /* Always do a register read first so we can insert the new bits  */
 360
 361         status = acpi_hw_register_read (ACPI_MTX_DO_NOT_LOCK,
 362                           bit_reg_info->parent_register, &register_value);
 363         if (ACPI_FAILURE (status)) {
 364                 goto unlock_and_exit;
 365         }
 366
 367         /*
 368          * Decode the Register ID
 369          * Register ID = [Register block ID] | [bit ID]
 370          *
 371          * Check bit ID to fine locate Register offset.
 372          * Check Mask to determine Register offset, and then read-write.
 373          */
 374         switch (bit_reg_info->parent_register) {
 375         case ACPI_REGISTER_PM1_STATUS:
 376
 377                 /*
 378                  * Status Registers are different from the rest.  Clear by
 379                  * writing 1, and writing 0 has no effect.  So, the only relevant
 380                  * information is the single bit we're interested in, all others should
 381                  * be written as 0 so they will be left unchanged.
 382                  */
 383                 value = ACPI_REGISTER_PREPARE_BITS (value,
 384                                  bit_reg_info->bit_position, bit_reg_info->access_bit_mask);
 385                 if (value) {
 386                         status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
 387                                          ACPI_REGISTER_PM1_STATUS, (u16) value);
 388                         register_value = 0;
 389                 }
 390                 break;
 391
 392
 393         case ACPI_REGISTER_PM1_ENABLE:
 394
 395                 ACPI_REGISTER_INSERT_VALUE (register_value, bit_reg_info->bit_position,
 396                                 bit_reg_info->access_bit_mask, value);
 397
 398                 status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
 399                                   ACPI_REGISTER_PM1_ENABLE, (u16) register_value);
 400                 break;
 401
 402
 403         case ACPI_REGISTER_PM1_CONTROL:
 404
 405                 /*
 406                  * Write the PM1 Control register.
 407                  * Note that at this level, the fact that there are actually TWO
 408                  * registers (A and B - and B may not exist) is abstracted.
 409                  */
 410                 ACPI_DEBUG_PRINT ((ACPI_DB_IO, "PM1 control: Read %X\n", register_value));
 411
 412                 ACPI_REGISTER_INSERT_VALUE (register_value, bit_reg_info->bit_position,
 413                                 bit_reg_info->access_bit_mask, value);
 414
 415                 status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
 416                                   ACPI_REGISTER_PM1_CONTROL, (u16) register_value);
 417                 break;
 418
 419
 420         case ACPI_REGISTER_PM2_CONTROL:
 421
 422                 status = acpi_hw_register_read (ACPI_MTX_DO_NOT_LOCK,
 423                                  ACPI_REGISTER_PM2_CONTROL, &register_value);
 424                 if (ACPI_FAILURE (status)) {
 425                         goto unlock_and_exit;
 426                 }
 427
 428                 ACPI_DEBUG_PRINT ((ACPI_DB_IO, "PM2 control: Read %X from %8.8X%8.8X\n",
 429                         register_value,
 430                         ACPI_FORMAT_UINT64 (acpi_gbl_FADT->xpm2_cnt_blk.address)));
 431
 432                 ACPI_REGISTER_INSERT_VALUE (register_value, bit_reg_info->bit_position,
 433                                 bit_reg_info->access_bit_mask, value);
 434
 435                 ACPI_DEBUG_PRINT ((ACPI_DB_IO, "About to write %4.4X to %8.8X%8.8X\n",
 436                         register_value,
 437                         ACPI_FORMAT_UINT64 (acpi_gbl_FADT->xpm2_cnt_blk.address)));
 438
 439                 status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
 440                                    ACPI_REGISTER_PM2_CONTROL, (u8) (register_value));
 441                 break;
 442
 443
 444         default:
 445                 break;
 446         }
 447
 448
 449 unlock_and_exit:
 450
 451         if (flags & ACPI_MTX_LOCK) {
 452                 (void) acpi_ut_release_mutex (ACPI_MTX_HARDWARE);
 453         }
 454
 455         /* Normalize the value that was read */
 456
 457         ACPI_DEBUG_EXEC (register_value = ((register_value & bit_reg_info->access_bit_mask) >> bit_reg_info->bit_position));
 458
 459         ACPI_DEBUG_PRINT ((ACPI_DB_IO, "Set bits: %8.8X actual %8.8X register %X\n",
 460                         value, register_value, bit_reg_info->parent_register));
 461         return_ACPI_STATUS (status);
 462 }
 463 EXPORT_SYMBOL(acpi_set_register);
 464
 465
 466 /******************************************************************************
 467  *
 468  * FUNCTION:    acpi_hw_register_read
 469  *
 470  * PARAMETERS:  use_lock            - Mutex hw access
 471  *              register_id         - register_iD + Offset
 472  *              return_value        - Value that was read from the register
 473  *
 474  * RETURN:      Status and the value read.
 475  *
 476  * DESCRIPTION: Acpi register read function.  Registers are read at the
 477  *              given offset.
 478  *
 479  ******************************************************************************/
 480
 481 acpi_status
 482 acpi_hw_register_read (
 483         u8                              use_lock,
 484         u32                             register_id,
 485         u32                             *return_value)
 486 {
 487         u32                             value1 = 0;
 488         u32                             value2 = 0;
 489         acpi_status                     status;
 490
 491
 492         ACPI_FUNCTION_TRACE ("hw_register_read");
 493
 494
 495         if (ACPI_MTX_LOCK == use_lock) {
 496                 status = acpi_ut_acquire_mutex (ACPI_MTX_HARDWARE);
 497                 if (ACPI_FAILURE (status)) {
 498                         return_ACPI_STATUS (status);
 499                 }
 500         }
 501
 502         switch (register_id) {
 503         case ACPI_REGISTER_PM1_STATUS:           /* 16-bit access */
 504
 505                 status = acpi_hw_low_level_read (16, &value1, &acpi_gbl_FADT->xpm1a_evt_blk);
 506                 if (ACPI_FAILURE (status)) {
 507                         goto unlock_and_exit;
 508                 }
 509
 510                 /* PM1B is optional */
 511
 512                 status = acpi_hw_low_level_read (16, &value2, &acpi_gbl_FADT->xpm1b_evt_blk);
 513                 value1 |= value2;
 514                 break;
 515
 516
 517         case ACPI_REGISTER_PM1_ENABLE:           /* 16-bit access */
 518
 519                 status = acpi_hw_low_level_read (16, &value1, &acpi_gbl_xpm1a_enable);
 520                 if (ACPI_FAILURE (status)) {
 521                         goto unlock_and_exit;
 522                 }
 523
 524                 /* PM1B is optional */
 525
 526                 status = acpi_hw_low_level_read (16, &value2, &acpi_gbl_xpm1b_enable);
 527                 value1 |= value2;
 528                 break;
 529
 530
 531         case ACPI_REGISTER_PM1_CONTROL:          /* 16-bit access */
 532
 533                 status = acpi_hw_low_level_read (16, &value1, &acpi_gbl_FADT->xpm1a_cnt_blk);
 534                 if (ACPI_FAILURE (status)) {
 535                         goto unlock_and_exit;
 536                 }
 537
 538                 status = acpi_hw_low_level_read (16, &value2, &acpi_gbl_FADT->xpm1b_cnt_blk);
 539                 value1 |= value2;
 540                 break;
 541
 542
 543         case ACPI_REGISTER_PM2_CONTROL:          /* 8-bit access */
 544
 545                 status = acpi_hw_low_level_read (8, &value1, &acpi_gbl_FADT->xpm2_cnt_blk);
 546                 break;
 547
 548
 549         case ACPI_REGISTER_PM_TIMER:             /* 32-bit access */
 550
 551                 status = acpi_hw_low_level_read (32, &value1, &acpi_gbl_FADT->xpm_tmr_blk);
 552                 break;
 553
 554         case ACPI_REGISTER_SMI_COMMAND_BLOCK:    /* 8-bit access */
 555
 556                 status = acpi_os_read_port (acpi_gbl_FADT->smi_cmd, &value1, 8);
 557                 break;
 558
 559         default:
 560                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unknown Register ID: %X\n", register_id));
 561                 status = AE_BAD_PARAMETER;
 562                 break;
 563         }
 564
 565 unlock_and_exit:
 566         if (ACPI_MTX_LOCK == use_lock) {
 567                 (void) acpi_ut_release_mutex (ACPI_MTX_HARDWARE);
 568         }
 569
 570         if (ACPI_SUCCESS (status)) {
 571                 *return_value = value1;
 572         }
 573
 574         return_ACPI_STATUS (status);
 575 }
 576
 577
 578 /******************************************************************************
 579  *
 580  * FUNCTION:    acpi_hw_register_write
 581  *
 582  * PARAMETERS:  use_lock            - Mutex hw access
 583  *              register_id         - register_iD + Offset
 584  *              Value               - The value to write
 585  *
 586  * RETURN:      Status
 587  *
 588  * DESCRIPTION: Acpi register Write function.  Registers are written at the
 589  *              given offset.
 590  *
 591  ******************************************************************************/
 592
 593 acpi_status
 594 acpi_hw_register_write (
 595         u8                              use_lock,
 596         u32                             register_id,
 597         u32                             value)
 598 {
 599         acpi_status                     status;
 600
 601
 602         ACPI_FUNCTION_TRACE ("hw_register_write");
 603
 604
 605         if (ACPI_MTX_LOCK == use_lock) {
 606                 status = acpi_ut_acquire_mutex (ACPI_MTX_HARDWARE);
 607                 if (ACPI_FAILURE (status)) {
 608                         return_ACPI_STATUS (status);
 609                 }
 610         }
 611
 612         switch (register_id) {
 613         case ACPI_REGISTER_PM1_STATUS:           /* 16-bit access */
 614
 615                 status = acpi_hw_low_level_write (16, value, &acpi_gbl_FADT->xpm1a_evt_blk);
 616                 if (ACPI_FAILURE (status)) {
 617                         goto unlock_and_exit;
 618                 }
 619
 620                 /* PM1B is optional */
 621
 622                 status = acpi_hw_low_level_write (16, value, &acpi_gbl_FADT->xpm1b_evt_blk);
 623                 break;
 624
 625
 626         case ACPI_REGISTER_PM1_ENABLE:           /* 16-bit access*/
 627
 628                 status = acpi_hw_low_level_write (16, value, &acpi_gbl_xpm1a_enable);
 629                 if (ACPI_FAILURE (status)) {
 630                         goto unlock_and_exit;
 631                 }
 632
 633                 /* PM1B is optional */
 634
 635                 status = acpi_hw_low_level_write (16, value, &acpi_gbl_xpm1b_enable);
 636                 break;
 637
 638
 639         case ACPI_REGISTER_PM1_CONTROL:          /* 16-bit access */
 640
 641                 status = acpi_hw_low_level_write (16, value, &acpi_gbl_FADT->xpm1a_cnt_blk);
 642                 if (ACPI_FAILURE (status)) {
 643                         goto unlock_and_exit;
 644                 }
 645
 646                 status = acpi_hw_low_level_write (16, value, &acpi_gbl_FADT->xpm1b_cnt_blk);
 647                 break;
 648
 649
 650         case ACPI_REGISTER_PM1A_CONTROL:         /* 16-bit access */
 651
 652                 status = acpi_hw_low_level_write (16, value, &acpi_gbl_FADT->xpm1a_cnt_blk);
 653                 break;
 654
 655
 656         case ACPI_REGISTER_PM1B_CONTROL:         /* 16-bit access */
 657
 658                 status = acpi_hw_low_level_write (16, value, &acpi_gbl_FADT->xpm1b_cnt_blk);
 659                 break;
 660
 661
 662         case ACPI_REGISTER_PM2_CONTROL:          /* 8-bit access */
 663
 664                 status = acpi_hw_low_level_write (8, value, &acpi_gbl_FADT->xpm2_cnt_blk);
 665                 break;
 666
 667
 668         case ACPI_REGISTER_PM_TIMER:             /* 32-bit access */
 669
 670                 status = acpi_hw_low_level_write (32, value, &acpi_gbl_FADT->xpm_tmr_blk);
 671                 break;
 672
 673
 674         case ACPI_REGISTER_SMI_COMMAND_BLOCK:    /* 8-bit access */
 675
 676                 /* SMI_CMD is currently always in IO space */
 677
 678                 status = acpi_os_write_port (acpi_gbl_FADT->smi_cmd, value, 8);
 679                 break;
 680
 681
 682         default:
 683                 status = AE_BAD_PARAMETER;
 684                 break;
 685         }
 686
 687 unlock_and_exit:
 688         if (ACPI_MTX_LOCK == use_lock) {
 689                 (void) acpi_ut_release_mutex (ACPI_MTX_HARDWARE);
 690         }
 691
 692         return_ACPI_STATUS (status);
 693 }
 694
 695
 696 /******************************************************************************
 697  *
 698  * FUNCTION:    acpi_hw_low_level_read
 699  *
 700  * PARAMETERS:  Width               - 8, 16, or 32
 701  *              Value               - Where the value is returned
 702  *              Reg                 - GAS register structure
 703  *
 704  * RETURN:      Status
 705  *
 706  * DESCRIPTION: Read from either memory or IO space.
 707  *
 708  ******************************************************************************/
 709
 710 acpi_status
 711 acpi_hw_low_level_read (
 712         u32                             width,
 713         u32                             *value,
 714         struct acpi_generic_address     *reg)
 715 {
 716         u64                             address;
 717         acpi_status                     status;
 718
 719
 720         ACPI_FUNCTION_NAME ("hw_low_level_read");
 721
 722
 723         /*
 724          * Must have a valid pointer to a GAS structure, and
 725          * a non-zero address within. However, don't return an error
 726          * because the PM1A/B code must not fail if B isn't present.
 727          */
 728         if (!reg) {
 729                 return (AE_OK);
 730         }
 731
 732         /* Get a local copy of the address.  Handles possible alignment issues */
 733
 734         ACPI_MOVE_64_TO_64 (&address, &reg->address);
 735         if (!address) {
 736                 return (AE_OK);
 737         }
 738         *value = 0;
 739
 740         /*
 741          * Two address spaces supported: Memory or IO.
 742          * PCI_Config is not supported here because the GAS struct is insufficient
 743          */
 744         switch (reg->address_space_id) {
 745         case ACPI_ADR_SPACE_SYSTEM_MEMORY:
 746
 747                 status = acpi_os_read_memory (
 748                                  (acpi_physical_address) address,
 749                                  value, width);
 750                 break;
 751
 752
 753         case ACPI_ADR_SPACE_SYSTEM_IO:
 754
 755                 status = acpi_os_read_port ((acpi_io_address) address,
 756                                  value, width);
 757                 break;
 758
 759
 760         default:
 761                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 762                         "Unsupported address space: %X\n", reg->address_space_id));
 763                 return (AE_BAD_PARAMETER);
 764         }
 765
 766         ACPI_DEBUG_PRINT ((ACPI_DB_IO, "Read:  %8.8X width %2d from %8.8X%8.8X (%s)\n",
 767                         *value, width,
 768                         ACPI_FORMAT_UINT64 (address),
 769                         acpi_ut_get_region_name (reg->address_space_id)));
 770
 771         return (status);
 772 }
 773
 774
 775 /******************************************************************************
 776  *
 777  * FUNCTION:    acpi_hw_low_level_write
 778  *
 779  * PARAMETERS:  Width               - 8, 16, or 32
 780  *              Value               - To be written
 781  *              Reg                 - GAS register structure
 782  *
 783  * RETURN:      Status
 784  *
 785  * DESCRIPTION: Write to either memory or IO space.
 786  *
 787  ******************************************************************************/
 788
 789 acpi_status
 790 acpi_hw_low_level_write (
 791         u32                             width,
 792         u32                             value,
 793         struct acpi_generic_address     *reg)
 794 {
 795         u64                             address;
 796         acpi_status                     status;
 797
 798
 799         ACPI_FUNCTION_NAME ("hw_low_level_write");
 800
 801
 802         /*
 803          * Must have a valid pointer to a GAS structure, and
 804          * a non-zero address within. However, don't return an error
 805          * because the PM1A/B code must not fail if B isn't present.
 806          */
 807         if (!reg) {
 808                 return (AE_OK);
 809         }
 810
 811         /* Get a local copy of the address.  Handles possible alignment issues */
 812
 813         ACPI_MOVE_64_TO_64 (&address, &reg->address);
 814         if (!address) {
 815                 return (AE_OK);
 816         }
 817
 818         /*
 819          * Two address spaces supported: Memory or IO.
 820          * PCI_Config is not supported here because the GAS struct is insufficient
 821          */
 822         switch (reg->address_space_id) {
 823         case ACPI_ADR_SPACE_SYSTEM_MEMORY:
 824
 825                 status = acpi_os_write_memory (
 826                                  (acpi_physical_address) address,
 827                                  value, width);
 828                 break;
 829
 830
 831         case ACPI_ADR_SPACE_SYSTEM_IO:
 832
 833                 status = acpi_os_write_port ((acpi_io_address) address,
 834                                  value, width);
 835                 break;
 836
 837
 838         default:
 839                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 840                         "Unsupported address space: %X\n", reg->address_space_id));
 841                 return (AE_BAD_PARAMETER);
 842         }
 843
 844         ACPI_DEBUG_PRINT ((ACPI_DB_IO, "Wrote: %8.8X width %2d   to %8.8X%8.8X (%s)\n",
 845                         value, width,
 846                         ACPI_FORMAT_UINT64 (address),
 847                         acpi_ut_get_region_name (reg->address_space_id)));
 848
 849         return (status);
 850 }