drivers/char/isicom.c

   1 /*
   2  *      This program is free software; you can redistribute it and/or
   3  *      modify it under the terms of the GNU General Public License
   4  *      as published by the Free Software Foundation; either version
   5  *      2 of the License, or (at your option) any later version.
   6  *
   7  *      Original driver code supplied by Multi-Tech
   8  *
   9  *      Changes
  10  *      1/9/98  alan@redhat.com         Merge to 2.0.x kernel tree
  11  *                                      Obtain and use official major/minors
  12  *                                      Loader switched to a misc device
  13  *                                      (fixed range check bug as a side effect)
  14  *                                      Printk clean up
  15  *      9/12/98 alan@redhat.com         Rough port to 2.1.x
  16  *
  17  *      10/6/99 sameer                  Merged the ISA and PCI drivers to
  18  *                                      a new unified driver.
  19  *      09/06/01 acme@conectiva.com.br  use capable, not suser, do
  20  *                                      restore_flags on failure in
  21  *                                      isicom_send_break, verify put_user
  22  *                                      result
  23  *      ***********************************************************
  24  *
  25  *      To use this driver you also need the support package. You
  26  *      can find this in RPM format on
  27  *              ftp://ftp.linux.org.uk/pub/linux/alan
  28  *
  29  *      You can find the original tools for this direct from Multitech
  30  *              ftp://ftp.multitech.com/ISI-Cards/
  31  *
  32  *      Having installed the cards the module options (/etc/modprobe.conf)
  33  *
  34  *      options isicom   io=card1,card2,card3,card4 irq=card1,card2,card3,card4
  35  *
  36  *      Omit those entries for boards you don't have installed.
  37  *
  38  */
  39
  40 #include <linux/module.h>
  41 #include <linux/kernel.h>
  42 #include <linux/tty.h>
  43 #include <linux/termios.h>
  44 #include <linux/fs.h>
  45 #include <linux/sched.h>
  46 #include <linux/serial.h>
  47 #include <linux/mm.h>
  48 #include <linux/miscdevice.h>
  49 #include <linux/interrupt.h>
  50 #include <linux/timer.h>
  51 #include <linux/delay.h>
  52 #include <linux/ioport.h>
  53
  54 #include <asm/uaccess.h>
  55 #include <asm/io.h>
  56 #include <asm/system.h>
  57
  58 #include <linux/pci.h>
  59
  60 #include <linux/isicom.h>
  61
  62 static struct pci_device_id isicom_pci_tbl[] = {
  63         { VENDOR_ID, 0x2028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
  64         { VENDOR_ID, 0x2051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
  65         { VENDOR_ID, 0x2052, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
  66         { VENDOR_ID, 0x2053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
  67         { VENDOR_ID, 0x2054, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
  68         { VENDOR_ID, 0x2055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
  69         { VENDOR_ID, 0x2056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
  70         { VENDOR_ID, 0x2057, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
  71         { VENDOR_ID, 0x2058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
  72         { 0 }
  73 };
  74 MODULE_DEVICE_TABLE(pci, isicom_pci_tbl);
  75
  76 static int prev_card = 3;       /*      start servicing isi_card[0]     */
  77 static struct isi_board * irq_to_board[16];
  78 static struct tty_driver *isicom_normal;
  79
  80 static struct isi_board isi_card[BOARD_COUNT];
  81 static struct isi_port  isi_ports[PORT_COUNT];
  82
  83 static struct timer_list tx;
  84 static char re_schedule = 1;
  85 #ifdef ISICOM_DEBUG
  86 static unsigned long tx_count = 0;
  87 #endif
  88
  89 static int ISILoad_ioctl(struct inode *inode, struct file *filp, unsigned  int cmd, unsigned long arg);
  90
  91 static void isicom_tx(unsigned long _data);
  92 static void isicom_start(struct tty_struct * tty);
  93
  94 static unsigned char * tmp_buf;
  95 static DECLARE_MUTEX(tmp_buf_sem);
  96
  97 /*   baud index mappings from linux defns to isi */
  98
  99 static signed char linuxb_to_isib[] = {
 100         -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 16, 17,
 101         18, 19
 102 };
 103
 104 /*
 105  *  Firmware loader driver specific routines
 106  *
 107  */
 108
 109 static struct file_operations ISILoad_fops = {
 110         .owner          = THIS_MODULE,
 111         .ioctl          = ISILoad_ioctl,
 112 };
 113
 114 struct miscdevice isiloader_device = {
 115         ISILOAD_MISC_MINOR, "isictl", &ISILoad_fops
 116 };
 117
 118
 119 static inline int WaitTillCardIsFree(unsigned short base)
 120 {
 121         unsigned long count=0;
 122         while( (!(inw(base+0xe) & 0x1)) && (count++ < 6000000));
 123         if (inw(base+0xe)&0x1)
 124                 return 0;
 125         else
 126                 return 1;
 127 }
 128
 129 static int ISILoad_ioctl(struct inode *inode, struct file *filp,
 130                          unsigned int cmd, unsigned long arg)
 131 {
 132         unsigned int card, i, j, signature, status, portcount = 0;
 133         unsigned long t;
 134         unsigned short word_count, base;
 135         bin_frame frame;
 136         void __user *argp = (void __user *)arg;
 137         /* exec_record exec_rec; */
 138
 139         if(get_user(card, (int __user *)argp))
 140                 return -EFAULT;
 141
 142         if(card < 0 || card >= BOARD_COUNT)
 143                 return -ENXIO;
 144
 145         base=isi_card[card].base;
 146
 147         if(base==0)
 148                 return -ENXIO;  /* disabled or not used */
 149
 150         switch(cmd) {
 151                 case MIOCTL_RESET_CARD:
 152                         if (!capable(CAP_SYS_ADMIN))
 153                                 return -EPERM;
 154                         printk(KERN_DEBUG "ISILoad:Resetting Card%d at 0x%x ",card+1,base);
 155
 156                         inw(base+0x8);
 157
 158                         for(t=jiffies+HZ/100;time_before(jiffies, t););
 159
 160                         outw(0,base+0x8); /* Reset */
 161
 162                         for(j=1;j<=3;j++) {
 163                                 for(t=jiffies+HZ;time_before(jiffies, t););
 164                                 printk(".");
 165                         }
 166                         signature=(inw(base+0x4)) & 0xff;
 167                         if (isi_card[card].isa) {
 168
 169                                 if (!(inw(base+0xe) & 0x1) || (inw(base+0x2))) {
 170 #ifdef ISICOM_DEBUG
 171                                         printk("\nbase+0x2=0x%x , base+0xe=0x%x",inw(base+0x2),inw(base+0xe));
 172 #endif
 173                                         printk("\nISILoad:ISA Card%d reset failure (Possible bad I/O Port Address 0x%x).\n",card+1,base);
 174                                         return -EIO;
 175                                 }
 176                         }
 177                         else {
 178                                 portcount = inw(base+0x2);
 179                                 if (!(inw(base+0xe) & 0x1) || ((portcount!=0) && (portcount!=4) && (portcount!=8))) {
 180 #ifdef ISICOM_DEBUG
 181                                         printk("\nbase+0x2=0x%x , base+0xe=0x%x",inw(base+0x2),inw(base+0xe));
 182 #endif
 183                                         printk("\nISILoad:PCI Card%d reset failure (Possible bad I/O Port Address 0x%x).\n",card+1,base);
 184                                         return -EIO;
 185                                 }
 186                         }
 187                         switch(signature) {
 188                         case    0xa5:
 189                         case    0xbb:
 190                         case    0xdd:
 191                                         if (isi_card[card].isa)
 192                                                 isi_card[card].port_count = 8;
 193                                         else {
 194                                                 if (portcount == 4)
 195                                                         isi_card[card].port_count = 4;
 196                                                 else
 197                                                         isi_card[card].port_count = 8;
 198                                         }
 199                                         isi_card[card].shift_count = 12;
 200                                         break;
 201
 202                         case    0xcc:   isi_card[card].port_count = 16;
 203                                         isi_card[card].shift_count = 11;
 204                                         break;
 205
 206                         default: printk("ISILoad:Card%d reset failure (Possible bad I/O Port Address 0x%x).\n",card+1,base);
 207 #ifdef ISICOM_DEBUG
 208                                  printk("Sig=0x%x\n",signature);
 209 #endif
 210                                  return -EIO;
 211                         }
 212                         printk("-Done\n");
 213                         return put_user(signature,(unsigned __user *)argp);
 214
 215         case    MIOCTL_LOAD_FIRMWARE:
 216                         if (!capable(CAP_SYS_ADMIN))
 217                                 return -EPERM;
 218
 219                         if(copy_from_user(&frame, argp, sizeof(bin_frame)))
 220                                 return -EFAULT;
 221
 222                         if (WaitTillCardIsFree(base))
 223                                 return -EIO;
 224
 225                         outw(0xf0,base);        /* start upload sequence */
 226                         outw(0x00,base);
 227                         outw((frame.addr), base);/*      lsb of adderess    */
 228
 229                         word_count=(frame.count >> 1) + frame.count % 2;
 230                         outw(word_count, base);
 231                         InterruptTheCard(base);
 232
 233                         for(i=0;i<=0x2f;i++);   /* a wee bit of delay */
 234
 235                         if (WaitTillCardIsFree(base))
 236                                 return -EIO;
 237
 238                         if ((status=inw(base+0x4))!=0) {
 239                                 printk(KERN_WARNING "ISILoad:Card%d rejected load header:\nAddress:0x%x \nCount:0x%x \nStatus:0x%x \n",
 240                                 card+1, frame.addr, frame.count, status);
 241                                 return -EIO;
 242                         }
 243                         outsw(base, (void *) frame.bin_data, word_count);
 244
 245                         InterruptTheCard(base);
 246
 247                         for(i=0;i<=0x0f;i++);   /* another wee bit of delay */
 248
 249                         if (WaitTillCardIsFree(base))
 250                                 return -EIO;
 251
 252                         if ((status=inw(base+0x4))!=0) {
 253                                 printk(KERN_ERR "ISILoad:Card%d got out of sync.Card Status:0x%x\n",card+1, status);
 254                                 return -EIO;
 255                         }
 256                         return 0;
 257
 258         case    MIOCTL_READ_FIRMWARE:
 259                         if (!capable(CAP_SYS_ADMIN))
 260                                 return -EPERM;
 261
 262                         if(copy_from_user(&frame, argp, sizeof(bin_header)))
 263                                 return -EFAULT;
 264
 265                         if (WaitTillCardIsFree(base))
 266                                 return -EIO;
 267
 268                         outw(0xf1,base);        /* start download sequence */
 269                         outw(0x00,base);
 270                         outw((frame.addr), base);/*      lsb of adderess    */
 271
 272                         word_count=(frame.count >> 1) + frame.count % 2;
 273                         outw(word_count+1, base);
 274                         InterruptTheCard(base);
 275
 276                         for(i=0;i<=0xf;i++);    /* a wee bit of delay */
 277
 278                         if (WaitTillCardIsFree(base))
 279                                 return -EIO;
 280
 281                         if ((status=inw(base+0x4))!=0) {
 282                                 printk(KERN_WARNING "ISILoad:Card%d rejected verify header:\nAddress:0x%x \nCount:0x%x \nStatus:0x%x \n",
 283                                 card+1, frame.addr, frame.count, status);
 284                                 return -EIO;
 285                         }
 286
 287                         inw(base);
 288                         insw(base, frame.bin_data, word_count);
 289                         InterruptTheCard(base);
 290
 291                         for(i=0;i<=0x0f;i++);   /* another wee bit of delay */
 292
 293                         if (WaitTillCardIsFree(base))
 294                                 return -EIO;
 295
 296                         if ((status=inw(base+0x4))!=0) {
 297                                 printk(KERN_ERR "ISILoad:Card%d verify got out of sync.Card Status:0x%x\n",card+1, status);
 298                                 return -EIO;
 299                         }
 300
 301                         if(copy_to_user(argp, &frame, sizeof(bin_frame)))
 302                                 return -EFAULT;
 303                         return 0;
 304
 305         case    MIOCTL_XFER_CTRL:
 306                         if (!capable(CAP_SYS_ADMIN))
 307                                 return -EPERM;
 308                         if (WaitTillCardIsFree(base))
 309                                 return -EIO;
 310
 311                         outw(0xf2, base);
 312                         outw(0x800, base);
 313                         outw(0x0, base);
 314                         outw(0x0, base);
 315                         InterruptTheCard(base);
 316                         outw(0x0, base+0x4);    /* for ISI4608 cards */
 317
 318                         isi_card[card].status |= FIRMWARE_LOADED;
 319                         return 0;
 320
 321         default:
 322 #ifdef ISICOM_DEBUG
 323                 printk(KERN_DEBUG "ISILoad: Received Ioctl cmd 0x%x.\n", cmd);
 324 #endif
 325                 return -ENOIOCTLCMD;
 326
 327         }
 328
 329 }
 330
 331
 332 /*
 333  *      ISICOM Driver specific routines ...
 334  *
 335  */
 336
 337 static inline int isicom_paranoia_check(struct isi_port const * port, char *name,
 338                                         const char * routine)
 339 {
 340 #ifdef ISICOM_DEBUG
 341         static const char * badmagic =
 342                         KERN_WARNING "ISICOM: Warning: bad isicom magic for dev %s in %s.\n";
 343         static const char * badport =
 344                         KERN_WARNING "ISICOM: Warning: NULL isicom port for dev %s in %s.\n";
 345         if (!port) {
 346                 printk(badport, name, routine);
 347                 return 1;
 348         }
 349         if (port->magic != ISICOM_MAGIC) {
 350                 printk(badmagic, name, routine);
 351                 return 1;
 352         }
 353 #endif
 354         return 0;
 355 }
 356
 357 /*      Transmitter     */
 358
 359 static void isicom_tx(unsigned long _data)
 360 {
 361         short count = (BOARD_COUNT-1), card, base;
 362         short txcount, wait, wrd, residue, word_count, cnt;
 363         struct isi_port * port;
 364         struct tty_struct * tty;
 365         unsigned long flags;
 366
 367 #ifdef ISICOM_DEBUG
 368         ++tx_count;
 369 #endif
 370
 371         /*      find next active board  */
 372         card = (prev_card + 1) & 0x0003;
 373         while(count-- > 0) {
 374                 if (isi_card[card].status & BOARD_ACTIVE)
 375                         break;
 376                 card = (card + 1) & 0x0003;
 377         }
 378         if (!(isi_card[card].status & BOARD_ACTIVE))
 379                 goto sched_again;
 380
 381         prev_card = card;
 382
 383         count = isi_card[card].port_count;
 384         port = isi_card[card].ports;
 385         base = isi_card[card].base;
 386         for (;count > 0;count--, port++) {
 387                 /* port not active or tx disabled to force flow control */
 388                 if (!(port->status & ISI_TXOK))
 389                         continue;
 390
 391                 tty = port->tty;
 392                 save_flags(flags); cli();
 393                 txcount = min_t(short, TX_SIZE, port->xmit_cnt);
 394                 if ((txcount <= 0) || tty->stopped || tty->hw_stopped) {
 395                         restore_flags(flags);
 396                         continue;
 397                 }
 398                 wait = 200;
 399                 while(((inw(base+0x0e) & 0x01) == 0) && (wait-- > 0));
 400                 if (wait <= 0) {
 401                         restore_flags(flags);
 402 #ifdef ISICOM_DEBUG
 403                         printk(KERN_DEBUG "ISICOM: isicom_tx:Card(0x%x) found busy.\n",
 404                                 card);
 405 #endif
 406                         continue;
 407                 }
 408                 if (!(inw(base + 0x02) & (1 << port->channel))) {
 409                         restore_flags(flags);
 410 #ifdef ISICOM_DEBUG
 411                         printk(KERN_DEBUG "ISICOM: isicom_tx: cannot tx to 0x%x:%d.\n",
 412                                         base, port->channel + 1);
 413 #endif
 414                         continue;
 415                 }
 416 #ifdef ISICOM_DEBUG
 417                 printk(KERN_DEBUG "ISICOM: txing %d bytes, port%d.\n",
 418                                 txcount, port->channel+1);
 419 #endif
 420                 outw((port->channel << isi_card[card].shift_count) | txcount
 421                                         , base);
 422                 residue = NO;
 423                 wrd = 0;
 424                 while (1) {
 425                         cnt = min_t(int, txcount, (SERIAL_XMIT_SIZE - port->xmit_tail));
 426                         if (residue == YES) {
 427                                 residue = NO;
 428                                 if (cnt > 0) {
 429                                         wrd |= (port->xmit_buf[port->xmit_tail] << 8);
 430                                         port->xmit_tail = (port->xmit_tail + 1) & (SERIAL_XMIT_SIZE - 1);
 431                                         port->xmit_cnt--;
 432                                         txcount--;
 433                                         cnt--;
 434                                         outw(wrd, base);
 435                                 }
 436                                 else {
 437                                         outw(wrd, base);
 438                                         break;
 439                                 }
 440                         }
 441                         if (cnt <= 0) break;
 442                         word_count = cnt >> 1;
 443                         outsw(base, port->xmit_buf+port->xmit_tail, word_count);
 444                         port->xmit_tail = (port->xmit_tail + (word_count << 1)) &
 445                                                 (SERIAL_XMIT_SIZE - 1);
 446                         txcount -= (word_count << 1);
 447                         port->xmit_cnt -= (word_count << 1);
 448                         if (cnt & 0x0001) {
 449                                 residue = YES;
 450                                 wrd = port->xmit_buf[port->xmit_tail];
 451                                 port->xmit_tail = (port->xmit_tail + 1) & (SERIAL_XMIT_SIZE - 1);
 452                                 port->xmit_cnt--;
 453                                 txcount--;
 454                         }
 455                 }
 456
 457                 InterruptTheCard(base);
 458                 if (port->xmit_cnt <= 0)
 459                         port->status &= ~ISI_TXOK;
 460                 if (port->xmit_cnt <= WAKEUP_CHARS)
 461                         schedule_work(&port->bh_tqueue);
 462                 restore_flags(flags);
 463         }
 464
 465                 /*      schedule another tx for hopefully in about 10ms */
 466 sched_again:
 467         if (!re_schedule)
 468                 return;
 469         init_timer(&tx);
 470         tx.expires = jiffies + HZ/100;
 471         tx.data = 0;
 472         tx.function = isicom_tx;
 473         add_timer(&tx);
 474
 475         return;
 476 }
 477
 478 /*      Interrupt handlers      */
 479
 480
 481 static void isicom_bottomhalf(void * data)
 482 {
 483         struct isi_port * port = (struct isi_port *) data;
 484         struct tty_struct * tty = port->tty;
 485
 486         if (!tty)
 487                 return;
 488
 489         tty_wakeup(tty);
 490         wake_up_interruptible(&tty->write_wait);
 491 }
 492
 493 /* main interrupt handler routine */
 494 static irqreturn_t isicom_interrupt(int irq, void *dev_id,
 495                                         struct pt_regs *regs)
 496 {
 497         struct isi_board * card;
 498         struct isi_port * port;
 499         struct tty_struct * tty;
 500         unsigned short base, header, word_count, count;
 501         unsigned char channel;
 502         short byte_count;
 503
 504         /*
 505          *      find the source of interrupt
 506          */
 507
 508         for(count = 0; count < BOARD_COUNT; count++) {
 509                 card = &isi_card[count];
 510                 if (card->base != 0) {
 511                         if (((card->isa == YES) && (card->irq == irq)) ||
 512                                 ((card->isa == NO) && (card->irq == irq) && (inw(card->base+0x0e) & 0x02)))
 513                                 break;
 514                 }
 515                 card = NULL;
 516         }
 517
 518         if (!card || !(card->status & FIRMWARE_LOADED)) {
 519 /*              printk(KERN_DEBUG "ISICOM: interrupt: not handling irq%d!.\n", irq);*/
 520                 return IRQ_NONE;
 521         }
 522
 523         base = card->base;
 524         if (card->isa == NO) {
 525         /*
 526          *      disable any interrupts from the PCI card and lower the
 527          *      interrupt line
 528          */
 529                 outw(0x8000, base+0x04);
 530                 ClearInterrupt(base);
 531         }
 532
 533         inw(base);              /* get the dummy word out */
 534         header = inw(base);
 535         channel = (header & 0x7800) >> card->shift_count;
 536         byte_count = header & 0xff;
 537 #ifdef ISICOM_DEBUG
 538         printk(KERN_DEBUG "ISICOM:Intr:(0x%x:%d).\n", base, channel+1);
 539 #endif
 540         if ((channel+1) > card->port_count) {
 541                 printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%x): %d(channel) > port_count.\n",
 542                                 base, channel+1);
 543                 if (card->isa)
 544                         ClearInterrupt(base);
 545                 else
 546                         outw(0x0000, base+0x04); /* enable interrupts */
 547                 return IRQ_HANDLED;
 548         }
 549         port = card->ports + channel;
 550         if (!(port->flags & ASYNC_INITIALIZED)) {
 551                 if (card->isa)
 552                         ClearInterrupt(base);
 553                 else
 554                         outw(0x0000, base+0x04); /* enable interrupts */
 555                 return IRQ_HANDLED;
 556         }
 557
 558         tty = port->tty;
 559
 560         if (header & 0x8000) {          /* Status Packet */
 561                 header = inw(base);
 562                 switch(header & 0xff) {
 563                         case 0: /* Change in EIA signals */
 564
 565                                 if (port->flags & ASYNC_CHECK_CD) {
 566                                         if (port->status & ISI_DCD) {
 567                                                 if (!(header & ISI_DCD)) {
 568                                                 /* Carrier has been lost  */
 569 #ifdef ISICOM_DEBUG
 570                                                         printk(KERN_DEBUG "ISICOM: interrupt: DCD->low.\n");
 571 #endif
 572                                                         port->status &= ~ISI_DCD;
 573                                                         schedule_work(&port->hangup_tq);
 574                                                 }
 575                                         }
 576                                         else {
 577                                                 if (header & ISI_DCD) {
 578                                                 /* Carrier has been detected */
 579 #ifdef ISICOM_DEBUG
 580                                                         printk(KERN_DEBUG "ISICOM: interrupt: DCD->high.\n");
 581 #endif
 582                                                         port->status |= ISI_DCD;
 583                                                         wake_up_interruptible(&port->open_wait);
 584                                                 }
 585                                         }
 586                                 }
 587                                 else {
 588                                         if (header & ISI_DCD)
 589                                                 port->status |= ISI_DCD;
 590                                         else
 591                                                 port->status &= ~ISI_DCD;
 592                                 }
 593
 594                                 if (port->flags & ASYNC_CTS_FLOW) {
 595                                         if (port->tty->hw_stopped) {
 596                                                 if (header & ISI_CTS) {
 597                                                         port->tty->hw_stopped = 0;
 598                                                         /* start tx ing */
 599                                                         port->status |= (ISI_TXOK | ISI_CTS);
 600                                                         schedule_work(&port->bh_tqueue);
 601                                                 }
 602                                         }
 603                                         else {
 604                                                 if (!(header & ISI_CTS)) {
 605                                                         port->tty->hw_stopped = 1;
 606                                                         /* stop tx ing */
 607                                                         port->status &= ~(ISI_TXOK | ISI_CTS);
 608                                                 }
 609                                         }
 610                                 }
 611                                 else {
 612                                         if (header & ISI_CTS)
 613                                                 port->status |= ISI_CTS;
 614                                         else
 615                                                 port->status &= ~ISI_CTS;
 616                                 }
 617
 618                                 if (header & ISI_DSR)
 619                                         port->status |= ISI_DSR;
 620                                 else
 621                                         port->status &= ~ISI_DSR;
 622
 623                                 if (header & ISI_RI)
 624                                         port->status |= ISI_RI;
 625                                 else
 626                                         port->status &= ~ISI_RI;
 627
 628                                 break;
 629
 630                         case 1: /* Received Break !!!    */
 631                                 if (tty->flip.count >= TTY_FLIPBUF_SIZE)
 632                                         break;
 633                                 *tty->flip.flag_buf_ptr++ = TTY_BREAK;
 634                                 /* dunno if this is right */
 635                                 *tty->flip.char_buf_ptr++ = 0;
 636                                 tty->flip.count++;
 637                                 if (port->flags & ASYNC_SAK)
 638                                         do_SAK(tty);
 639                                 schedule_delayed_work(&tty->flip.work, 1);
 640                                 break;
 641
 642                         case 2: /* Statistics            */
 643                                 printk(KERN_DEBUG "ISICOM: isicom_interrupt: stats!!!.\n");
 644                                 break;
 645
 646                         default:
 647                                 printk(KERN_WARNING "ISICOM: Intr: Unknown code in status packet.\n");
 648                                 break;
 649                 }
 650         }
 651         else {                          /* Data   Packet */
 652                 count = min_t(unsigned short, byte_count, (TTY_FLIPBUF_SIZE - tty->flip.count));
 653 #ifdef ISICOM_DEBUG
 654                 printk(KERN_DEBUG "ISICOM: Intr: Can rx %d of %d bytes.\n",
 655                                         count, byte_count);
 656 #endif
 657                 word_count = count >> 1;
 658                 insw(base, tty->flip.char_buf_ptr, word_count);
 659                 tty->flip.char_buf_ptr += (word_count << 1);
 660                 byte_count -= (word_count << 1);
 661                 if (count & 0x0001) {
 662                         *tty->flip.char_buf_ptr++ = (char)(inw(base) & 0xff);
 663                         byte_count -= 2;
 664                 }
 665                 memset(tty->flip.flag_buf_ptr, 0, count);
 666                 tty->flip.flag_buf_ptr += count;
 667                 tty->flip.count += count;
 668
 669                 if (byte_count > 0) {
 670                         printk(KERN_DEBUG "ISICOM: Intr(0x%x:%d): Flip buffer overflow! dropping bytes...\n",
 671                                         base, channel+1);
 672                         while(byte_count > 0) { /* drain out unread xtra data */
 673                                 inw(base);
 674                                 byte_count -= 2;
 675                         }
 676                 }
 677                 schedule_delayed_work(&tty->flip.work, 1);
 678         }
 679         if (card->isa == YES)
 680                 ClearInterrupt(base);
 681         else
 682                 outw(0x0000, base+0x04); /* enable interrupts */
 683         return IRQ_HANDLED;
 684 }
 685
 686  /* called with interrupts disabled */
 687 static void isicom_config_port(struct isi_port * port)
 688 {
 689         struct isi_board * card = port->card;
 690         struct tty_struct * tty;
 691         unsigned long baud;
 692         unsigned short channel_setup, wait, base = card->base;
 693         unsigned short channel = port->channel, shift_count = card->shift_count;
 694         unsigned char flow_ctrl;
 695
 696         if (!(tty = port->tty) || !tty->termios)
 697                 return;
 698         baud = C_BAUD(tty);
 699         if (baud & CBAUDEX) {
 700                 baud &= ~CBAUDEX;
 701
 702                 /*  if CBAUDEX bit is on and the baud is set to either 50 or 75
 703                  *  then the card is programmed for 57.6Kbps or 115Kbps
 704                  *  respectively.
 705                  */
 706
 707                 if (baud < 1 || baud > 2)
 708                         port->tty->termios->c_cflag &= ~CBAUDEX;
 709                 else
 710                         baud += 15;
 711         }
 712         if (baud == 15) {
 713
 714                 /*  the ASYNC_SPD_HI and ASYNC_SPD_VHI options are set
 715                  *  by the set_serial_info ioctl ... this is done by
 716                  *  the 'setserial' utility.
 717                  */
 718
 719                 if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
 720                         baud++;     /*  57.6 Kbps */
 721                 if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
 722                         baud +=2;   /*  115  Kbps */
 723         }
 724         if (linuxb_to_isib[baud] == -1) {
 725                 /* hang up */
 726                 drop_dtr(port);
 727                 return;
 728         }
 729         else
 730                 raise_dtr(port);
 731
 732         wait = 100;
 733         while (((inw(base + 0x0e) & 0x0001) == 0) && (wait-- > 0));
 734         if (!wait) {
 735                 printk(KERN_WARNING "ISICOM: Card found busy in isicom_config_port at channel setup.\n");
 736                 return;
 737         }
 738         outw(0x8000 | (channel << shift_count) |0x03, base);
 739         outw(linuxb_to_isib[baud] << 8 | 0x03, base);
 740         channel_setup = 0;
 741         switch(C_CSIZE(tty)) {
 742                 case CS5:
 743                         channel_setup |= ISICOM_CS5;
 744                         break;
 745                 case CS6:
 746                         channel_setup |= ISICOM_CS6;
 747                         break;
 748                 case CS7:
 749                         channel_setup |= ISICOM_CS7;
 750                         break;
 751                 case CS8:
 752                         channel_setup |= ISICOM_CS8;
 753                         break;
 754         }
 755
 756         if (C_CSTOPB(tty))
 757                 channel_setup |= ISICOM_2SB;
 758
 759         if (C_PARENB(tty))
 760                 channel_setup |= ISICOM_EVPAR;
 761         if (C_PARODD(tty))
 762                 channel_setup |= ISICOM_ODPAR;
 763         outw(channel_setup, base);
 764         InterruptTheCard(base);
 765
 766         if (C_CLOCAL(tty))
 767                 port->flags &= ~ASYNC_CHECK_CD;
 768         else
 769                 port->flags |= ASYNC_CHECK_CD;
 770
 771         /* flow control settings ...*/
 772         flow_ctrl = 0;
 773         port->flags &= ~ASYNC_CTS_FLOW;
 774         if (C_CRTSCTS(tty)) {
 775                 port->flags |= ASYNC_CTS_FLOW;
 776                 flow_ctrl |= ISICOM_CTSRTS;
 777         }
 778         if (I_IXON(tty))
 779                 flow_ctrl |= ISICOM_RESPOND_XONXOFF;
 780         if (I_IXOFF(tty))
 781                 flow_ctrl |= ISICOM_INITIATE_XONXOFF;
 782
 783         wait = 100;
 784         while (((inw(base + 0x0e) & 0x0001) == 0) && (wait-- > 0));
 785         if (!wait) {
 786                 printk(KERN_WARNING "ISICOM: Card found busy in isicom_config_port at flow setup.\n");
 787                 return;
 788         }
 789         outw(0x8000 | (channel << shift_count) |0x04, base);
 790         outw(flow_ctrl << 8 | 0x05, base);
 791         outw((STOP_CHAR(tty)) << 8 | (START_CHAR(tty)), base);
 792         InterruptTheCard(base);
 793
 794         /*      rx enabled -> enable port for rx on the card    */
 795         if (C_CREAD(tty)) {
 796                 card->port_status |= (1 << channel);
 797                 outw(card->port_status, base + 0x02);
 798         }
 799
 800 }
 801
 802 /* open et all */
 803
 804 static inline void isicom_setup_board(struct isi_board * bp)
 805 {
 806         int channel;
 807         struct isi_port * port;
 808         unsigned long flags;
 809
 810         if (bp->status & BOARD_ACTIVE)
 811                 return;
 812         port = bp->ports;
 813 #ifdef ISICOM_DEBUG
 814         printk(KERN_DEBUG "ISICOM: setup_board: drop_dtr_rts start, port_count %d...\n", bp->port_count);
 815 #endif
 816         for(channel = 0; channel < bp->port_count; channel++, port++) {
 817                 save_flags(flags); cli();
 818                 drop_dtr_rts(port);
 819                 restore_flags(flags);
 820         }
 821 #ifdef ISICOM_DEBUG
 822         printk(KERN_DEBUG "ISICOM: setup_board: drop_dtr_rts stop...\n");
 823 #endif
 824
 825         bp->status |= BOARD_ACTIVE;
 826         return;
 827 }
 828
 829 static int isicom_setup_port(struct isi_port * port)
 830 {
 831         struct isi_board * card = port->card;
 832         unsigned long flags;
 833
 834         if (port->flags & ASYNC_INITIALIZED)
 835                 return 0;
 836         if (!port->xmit_buf) {
 837                 unsigned long page;
 838
 839                 if (!(page = get_zeroed_page(GFP_KERNEL)))
 840                         return -ENOMEM;
 841
 842                 if (port->xmit_buf) {
 843                         free_page(page);
 844                         return -ERESTARTSYS;
 845                 }
 846                 port->xmit_buf = (unsigned char *) page;
 847         }
 848         save_flags(flags); cli();
 849         if (port->tty)
 850                 clear_bit(TTY_IO_ERROR, &port->tty->flags);
 851         if (port->count == 1)
 852                 card->count++;
 853
 854         port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
 855
 856         /*      discard any residual data       */
 857         kill_queue(port, ISICOM_KILLTX | ISICOM_KILLRX);
 858
 859         isicom_config_port(port);
 860         port->flags |= ASYNC_INITIALIZED;
 861
 862         restore_flags(flags);
 863
 864         return 0;
 865 }
 866
 867 static int block_til_ready(struct tty_struct * tty, struct file * filp, struct isi_port * port)
 868 {
 869         int do_clocal = 0, retval;
 870         DECLARE_WAITQUEUE(wait, current);
 871
 872         /* block if port is in the process of being closed */
 873
 874         if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
 875 #ifdef ISICOM_DEBUG
 876                 printk(KERN_DEBUG "ISICOM: block_til_ready: close in progress.\n");
 877 #endif
 878                 interruptible_sleep_on(&port->close_wait);
 879                 if (port->flags & ASYNC_HUP_NOTIFY)
 880                         return -EAGAIN;
 881                 else
 882                         return -ERESTARTSYS;
 883         }
 884
 885         /* if non-blocking mode is set ... */
 886
 887         if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) {
 888 #ifdef ISICOM_DEBUG
 889                 printk(KERN_DEBUG "ISICOM: block_til_ready: non-block mode.\n");
 890 #endif
 891                 port->flags |= ASYNC_NORMAL_ACTIVE;
 892                 return 0;
 893         }
 894
 895         if (C_CLOCAL(tty))
 896                 do_clocal = 1;
 897 #ifdef ISICOM_DEBUG
 898         if (do_clocal)
 899                 printk(KERN_DEBUG "ISICOM: block_til_ready: CLOCAL set.\n");
 900 #endif
 901
 902         /* block waiting for DCD to be asserted, and while
 903                                                 callout dev is busy */
 904         retval = 0;
 905         add_wait_queue(&port->open_wait, &wait);
 906         cli();
 907                 if (!tty_hung_up_p(filp))
 908                         port->count--;
 909         sti();
 910         port->blocked_open++;
 911 #ifdef ISICOM_DEBUG
 912         printk(KERN_DEBUG "ISICOM: block_til_ready: waiting for DCD...\n");
 913 #endif
 914         while (1) {
 915                 cli();
 916                 raise_dtr_rts(port);
 917                 sti();
 918                 set_current_state(TASK_INTERRUPTIBLE);
 919                 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
 920                         if (port->flags & ASYNC_HUP_NOTIFY)
 921                                 retval = -EAGAIN;
 922                         else
 923                                 retval = -ERESTARTSYS;
 924 #ifdef ISICOM_DEBUG
 925                         printk(KERN_DEBUG "ISICOM: block_til_ready: tty_hung_up_p || not init.\n");
 926 #endif
 927                         break;
 928                 }
 929                 if (!(port->flags & ASYNC_CLOSING) &&
 930                     (do_clocal || (port->status & ISI_DCD))) {
 931 #ifdef ISICOM_DEBUG
 932                         printk(KERN_DEBUG "ISICOM: block_til_ready: do_clocal || DCD.\n");
 933 #endif
 934                         break;
 935                 }
 936                 if (signal_pending(current)) {
 937 #ifdef ISICOM_DEBUG
 938                         printk(KERN_DEBUG "ISICOM: block_til_ready: sig blocked.\n");
 939 #endif
 940                         retval = -ERESTARTSYS;
 941                         break;
 942                 }
 943                 schedule();
 944         }
 945         set_current_state(TASK_RUNNING);
 946         remove_wait_queue(&port->open_wait, &wait);
 947         if (!tty_hung_up_p(filp))
 948                 port->count++;
 949         port->blocked_open--;
 950         if (retval)
 951                 return retval;
 952         port->flags |= ASYNC_NORMAL_ACTIVE;
 953         return 0;
 954 }
 955
 956 static int isicom_open(struct tty_struct * tty, struct file * filp)
 957 {
 958         struct isi_port * port;
 959         struct isi_board * card;
 960         unsigned int line, board;
 961         int error;
 962
 963 #ifdef ISICOM_DEBUG
 964         printk(KERN_DEBUG "ISICOM: open start!!!.\n");
 965 #endif
 966         line = tty->index;
 967
 968 #ifdef ISICOM_DEBUG
 969         printk(KERN_DEBUG "line = %d.\n", line);
 970 #endif
 971
 972         if ((line < 0) || (line > (PORT_COUNT-1)))
 973                 return -ENODEV;
 974         board = BOARD(line);
 975
 976 #ifdef ISICOM_DEBUG
 977         printk(KERN_DEBUG "board = %d.\n", board);
 978 #endif
 979
 980         card = &isi_card[board];
 981         if (!(card->status & FIRMWARE_LOADED)) {
 982 #ifdef ISICOM_DEBUG
 983                 printk(KERN_DEBUG"ISICOM: Firmware not loaded to card%d.\n", board);
 984 #endif
 985                 return -ENODEV;
 986         }
 987
 988         /*  open on a port greater than the port count for the card !!! */
 989         if (line > ((board * 16) + card->port_count - 1)) {
 990                 printk(KERN_ERR "ISICOM: Open on a port which exceeds the port_count of the card!\n");
 991                 return -ENODEV;
 992         }
 993         port = &isi_ports[line];
 994         if (isicom_paranoia_check(port, tty->name, "isicom_open"))
 995                 return -ENODEV;
 996
 997 #ifdef ISICOM_DEBUG
 998         printk(KERN_DEBUG "ISICOM: isicom_setup_board ...\n");
 999 #endif
1000         isicom_setup_board(card);
1001
1002         port->count++;
1003         tty->driver_data = port;
1004         port->tty = tty;
1005 #ifdef ISICOM_DEBUG
1006         printk(KERN_DEBUG "ISICOM: isicom_setup_port ...\n");
1007 #endif
1008         if ((error = isicom_setup_port(port))!=0)
1009                 return error;
1010 #ifdef ISICOM_DEBUG
1011         printk(KERN_DEBUG "ISICOM: block_til_ready ...\n");
1012 #endif
1013         if ((error = block_til_ready(tty, filp, port))!=0)
1014                 return error;
1015
1016 #ifdef ISICOM_DEBUG
1017         printk(KERN_DEBUG "ISICOM: open end!!!.\n");
1018 #endif
1019         return 0;
1020 }
1021
1022 /* close et all */
1023
1024 static inline void isicom_shutdown_board(struct isi_board * bp)
1025 {
1026         int channel;
1027         struct isi_port * port;
1028
1029         if (!(bp->status & BOARD_ACTIVE))
1030                 return;
1031         bp->status &= ~BOARD_ACTIVE;
1032         port = bp->ports;
1033         for(channel = 0; channel < bp->port_count; channel++, port++) {
1034                 drop_dtr_rts(port);
1035         }
1036 }
1037
1038 static void isicom_shutdown_port(struct isi_port * port)
1039 {
1040         struct isi_board * card = port->card;
1041         struct tty_struct * tty;
1042
1043         if (!(port->flags & ASYNC_INITIALIZED))
1044                 return;
1045         if (port->xmit_buf) {
1046                 free_page((unsigned long) port->xmit_buf);
1047                 port->xmit_buf = NULL;
1048         }
1049         if (!(tty = port->tty) || C_HUPCL(tty))
1050                 /* drop dtr on this port */
1051                 drop_dtr(port);
1052
1053         /* any other port uninits  */
1054
1055         if (tty)
1056                 set_bit(TTY_IO_ERROR, &tty->flags);
1057         port->flags &= ~ASYNC_INITIALIZED;
1058
1059         if (--card->count < 0) {
1060                 printk(KERN_DEBUG "ISICOM: isicom_shutdown_port: bad board(0x%x) count %d.\n",
1061                         card->base, card->count);
1062                 card->count = 0;
1063         }
1064
1065         /* last port was closed , shutdown that boad too */
1066         if (!card->count)
1067                 isicom_shutdown_board(card);
1068 }
1069
1070 static void isicom_close(struct tty_struct * tty, struct file * filp)
1071 {
1072         struct isi_port * port = (struct isi_port *) tty->driver_data;
1073         struct isi_board * card = port->card;
1074         unsigned long flags;
1075
1076         if (!port)
1077                 return;
1078         if (isicom_paranoia_check(port, tty->name, "isicom_close"))
1079                 return;
1080
1081 #ifdef ISICOM_DEBUG
1082         printk(KERN_DEBUG "ISICOM: Close start!!!.\n");
1083 #endif
1084
1085         save_flags(flags); cli();
1086         if (tty_hung_up_p(filp)) {
1087                 restore_flags(flags);
1088                 return;
1089         }
1090
1091         if ((tty->count == 1) && (port->count != 1)) {
1092                 printk(KERN_WARNING "ISICOM:(0x%x) isicom_close: bad port count"
1093                         "tty->count = 1 port count = %d.\n",
1094                         card->base, port->count);
1095                 port->count = 1;
1096         }
1097         if (--port->count < 0) {
1098                 printk(KERN_WARNING "ISICOM:(0x%x) isicom_close: bad port count for"
1099                         "channel%d = %d", card->base, port->channel,
1100                         port->count);
1101                 port->count = 0;
1102         }
1103
1104         if (port->count) {
1105                 restore_flags(flags);
1106                 return;
1107         }
1108         port->flags |= ASYNC_CLOSING;
1109         tty->closing = 1;
1110         if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
1111                 tty_wait_until_sent(tty, port->closing_wait);
1112         /* indicate to the card that no more data can be received
1113            on this port */
1114         if (port->flags & ASYNC_INITIALIZED) {
1115                 card->port_status &= ~(1 << port->channel);
1116                 outw(card->port_status, card->base + 0x02);
1117         }
1118         isicom_shutdown_port(port);
1119         if (tty->driver->flush_buffer)
1120                 tty->driver->flush_buffer(tty);
1121
1122         tty_ldisc_flush(tty);
1123         tty->closing = 0;
1124         port->tty = NULL;
1125         if (port->blocked_open) {
1126                 if (port->close_delay) {
1127                         set_current_state(TASK_INTERRUPTIBLE);
1128 #ifdef ISICOM_DEBUG
1129                         printk(KERN_DEBUG "ISICOM: scheduling until time out.\n");
1130 #endif
1131                         schedule_timeout(port->close_delay);
1132                 }
1133                 wake_up_interruptible(&port->open_wait);
1134         }
1135         port->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
1136         wake_up_interruptible(&port->close_wait);
1137         restore_flags(flags);
1138 #ifdef ISICOM_DEBUG
1139         printk(KERN_DEBUG "ISICOM: Close end!!!.\n");
1140 #endif
1141 }
1142
1143 /* write et all */
1144 static int isicom_write(struct tty_struct * tty, int from_user,
1145                         const unsigned char * buf, int count)
1146 {
1147         struct isi_port * port = (struct isi_port *) tty->driver_data;
1148         unsigned long flags;
1149         int cnt, total = 0;
1150 #ifdef ISICOM_DEBUG
1151         printk(KERN_DEBUG "ISICOM: isicom_write for port%d: %d bytes.\n",
1152                         port->channel+1, count);
1153 #endif
1154         if (isicom_paranoia_check(port, tty->name, "isicom_write"))
1155                 return 0;
1156
1157         if (!tty || !port->xmit_buf || !tmp_buf)
1158                 return 0;
1159         if (from_user)
1160                 down(&tmp_buf_sem); /* acquire xclusive access to tmp_buf */
1161
1162         save_flags(flags);
1163         while(1) {
1164                 cli();
1165                 cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
1166                                             SERIAL_XMIT_SIZE - port->xmit_head));
1167                 if (cnt <= 0)
1168                         break;
1169
1170                 if (from_user) {
1171                         /* the following may block for paging... hence
1172                            enabling interrupts but tx routine may have
1173                            created more space in xmit_buf when the ctrl
1174                            gets back here  */
1175                         sti();
1176                         if (copy_from_user(tmp_buf, buf, cnt)) {
1177                                 up(&tmp_buf_sem);
1178                                 restore_flags(flags);
1179                                 return -EFAULT;
1180                         }
1181                         cli();
1182                         cnt = min_t(int, cnt, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
1183                                                   SERIAL_XMIT_SIZE - port->xmit_head));
1184                         memcpy(port->xmit_buf + port->xmit_head, tmp_buf, cnt);
1185                 }
1186                 else
1187                         memcpy(port->xmit_buf + port->xmit_head, buf, cnt);
1188                 port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE - 1);
1189                 port->xmit_cnt += cnt;
1190                 restore_flags(flags);
1191                 buf += cnt;
1192                 count -= cnt;
1193                 total += cnt;
1194         }
1195         if (from_user)
1196                 up(&tmp_buf_sem);
1197         if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped)
1198                 port->status |= ISI_TXOK;
1199         restore_flags(flags);
1200 #ifdef ISICOM_DEBUG
1201         printk(KERN_DEBUG "ISICOM: isicom_write %d bytes written.\n", total);
1202 #endif
1203         return total;
1204 }
1205
1206 /* put_char et all */
1207 static void isicom_put_char(struct tty_struct * tty, unsigned char ch)
1208 {
1209         struct isi_port * port = (struct isi_port *) tty->driver_data;
1210         unsigned long flags;
1211
1212         if (isicom_paranoia_check(port, tty->name, "isicom_put_char"))
1213                 return;
1214
1215         if (!tty || !port->xmit_buf)
1216                 return;
1217 #ifdef ISICOM_DEBUG
1218         printk(KERN_DEBUG "ISICOM: put_char, port %d, char %c.\n", port->channel+1, ch);
1219 #endif
1220
1221         save_flags(flags); cli();
1222
1223         if (port->xmit_cnt >= (SERIAL_XMIT_SIZE - 1)) {
1224                 restore_flags(flags);
1225                 return;
1226         }
1227
1228         port->xmit_buf[port->xmit_head++] = ch;
1229         port->xmit_head &= (SERIAL_XMIT_SIZE - 1);
1230         port->xmit_cnt++;
1231         restore_flags(flags);
1232 }
1233
1234 /* flush_chars et all */
1235 static void isicom_flush_chars(struct tty_struct * tty)
1236 {
1237         struct isi_port * port = (struct isi_port *) tty->driver_data;
1238
1239         if (isicom_paranoia_check(port, tty->name, "isicom_flush_chars"))
1240                 return;
1241
1242         if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
1243             !port->xmit_buf)
1244                 return;
1245
1246         /* this tells the transmitter to consider this port for
1247            data output to the card ... that's the best we can do. */
1248         port->status |= ISI_TXOK;
1249 }
1250
1251 /* write_room et all */
1252 static int isicom_write_room(struct tty_struct * tty)
1253 {
1254         struct isi_port * port = (struct isi_port *) tty->driver_data;
1255         int free;
1256         if (isicom_paranoia_check(port, tty->name, "isicom_write_room"))
1257                 return 0;
1258
1259         free = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
1260         if (free < 0)
1261                 free = 0;
1262         return free;
1263 }
1264
1265 /* chars_in_buffer et all */
1266 static int isicom_chars_in_buffer(struct tty_struct * tty)
1267 {
1268         struct isi_port * port = (struct isi_port *) tty->driver_data;
1269         if (isicom_paranoia_check(port, tty->name, "isicom_chars_in_buffer"))
1270                 return 0;
1271         return port->xmit_cnt;
1272 }
1273
1274 /* ioctl et all */
1275 static inline void isicom_send_break(struct isi_port * port, unsigned long length)
1276 {
1277         struct isi_board * card = port->card;
1278         short wait = 10;
1279         unsigned short base = card->base;
1280         unsigned long flags;
1281
1282         save_flags(flags); cli();
1283         while (((inw(base + 0x0e) & 0x0001) == 0) && (wait-- > 0));
1284         if (!wait) {
1285                 printk(KERN_DEBUG "ISICOM: Card found busy in isicom_send_break.\n");
1286                 goto out;
1287         }
1288         outw(0x8000 | ((port->channel) << (card->shift_count)) | 0x3, base);
1289         outw((length & 0xff) << 8 | 0x00, base);
1290         outw((length & 0xff00), base);
1291         InterruptTheCard(base);
1292 out:    restore_flags(flags);
1293 }
1294
1295 static int isicom_tiocmget(struct tty_struct *tty, struct file *file)
1296 {
1297         struct isi_port * port = (struct isi_port *) tty->driver_data;
1298         /* just send the port status */
1299         unsigned short status = port->status;
1300
1301         if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
1302                 return -ENODEV;
1303
1304         return  ((status & ISI_RTS) ? TIOCM_RTS : 0) |
1305                 ((status & ISI_DTR) ? TIOCM_DTR : 0) |
1306                 ((status & ISI_DCD) ? TIOCM_CAR : 0) |
1307                 ((status & ISI_DSR) ? TIOCM_DSR : 0) |
1308                 ((status & ISI_CTS) ? TIOCM_CTS : 0) |
1309                 ((status & ISI_RI ) ? TIOCM_RI  : 0);
1310 }
1311
1312 static int isicom_tiocmset(struct tty_struct *tty, struct file *file,
1313                            unsigned int set, unsigned int clear)
1314 {
1315         struct isi_port * port = (struct isi_port *) tty->driver_data;
1316         unsigned long flags;
1317
1318         if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
1319                 return -ENODEV;
1320
1321         save_flags(flags); cli();
1322         if (set & TIOCM_RTS)
1323                 raise_rts(port);
1324         if (set & TIOCM_DTR)
1325                 raise_dtr(port);
1326
1327         if (clear & TIOCM_RTS)
1328                 drop_rts(port);
1329         if (clear & TIOCM_DTR)
1330                 drop_dtr(port);
1331
1332         restore_flags(flags);
1333         return 0;
1334 }
1335
1336 static int isicom_set_serial_info(struct isi_port * port,
1337                                         struct serial_struct __user *info)
1338 {
1339         struct serial_struct newinfo;
1340         unsigned long flags;
1341         int reconfig_port;
1342
1343         if(copy_from_user(&newinfo, info, sizeof(newinfo)))
1344                 return -EFAULT;
1345
1346         reconfig_port = ((port->flags & ASYNC_SPD_MASK) !=
1347                          (newinfo.flags & ASYNC_SPD_MASK));
1348
1349         if (!capable(CAP_SYS_ADMIN)) {
1350                 if ((newinfo.close_delay != port->close_delay) ||
1351                     (newinfo.closing_wait != port->closing_wait) ||
1352                     ((newinfo.flags & ~ASYNC_USR_MASK) !=
1353                      (port->flags & ~ASYNC_USR_MASK)))
1354                         return -EPERM;
1355                 port->flags = ((port->flags & ~ ASYNC_USR_MASK) |
1356                                 (newinfo.flags & ASYNC_USR_MASK));
1357         }
1358         else {
1359                 port->close_delay = newinfo.close_delay;
1360                 port->closing_wait = newinfo.closing_wait;
1361                 port->flags = ((port->flags & ~ASYNC_FLAGS) |
1362                                 (newinfo.flags & ASYNC_FLAGS));
1363         }
1364         if (reconfig_port) {
1365                 save_flags(flags); cli();
1366                 isicom_config_port(port);
1367                 restore_flags(flags);
1368         }
1369         return 0;
1370 }
1371
1372 static int isicom_get_serial_info(struct isi_port * port,
1373                                         struct serial_struct __user *info)
1374 {
1375         struct serial_struct out_info;
1376
1377         memset(&out_info, 0, sizeof(out_info));
1378 /*      out_info.type = ? */
1379         out_info.line = port - isi_ports;
1380         out_info.port = port->card->base;
1381         out_info.irq = port->card->irq;
1382         out_info.flags = port->flags;
1383 /*      out_info.baud_base = ? */
1384         out_info.close_delay = port->close_delay;
1385         out_info.closing_wait = port->closing_wait;
1386         if(copy_to_user(info, &out_info, sizeof(out_info)))
1387                 return -EFAULT;
1388         return 0;
1389 }
1390
1391 static int isicom_ioctl(struct tty_struct * tty, struct file * filp,
1392                         unsigned int cmd, unsigned long arg)
1393 {
1394         struct isi_port * port = (struct isi_port *) tty->driver_data;
1395         void __user *argp = (void __user *)arg;
1396         int retval;
1397
1398         if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
1399                 return -ENODEV;
1400
1401         switch(cmd) {
1402                 case TCSBRK:
1403                         retval = tty_check_change(tty);
1404                         if (retval)
1405                                 return retval;
1406                         tty_wait_until_sent(tty, 0);
1407                         if (!arg)
1408                                 isicom_send_break(port, HZ/4);
1409                         return 0;
1410
1411                 case TCSBRKP:
1412                         retval = tty_check_change(tty);
1413                         if (retval)
1414                                 return retval;
1415                         tty_wait_until_sent(tty, 0);
1416                         isicom_send_break(port, arg ? arg * (HZ/10) : HZ/4);
1417                         return 0;
1418
1419                 case TIOCGSOFTCAR:
1420                         return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp);
1421
1422                 case TIOCSSOFTCAR:
1423                         if(get_user(arg, (unsigned long __user *) argp))
1424                                 return -EFAULT;
1425                         tty->termios->c_cflag =
1426                                 ((tty->termios->c_cflag & ~CLOCAL) |
1427                                 (arg ? CLOCAL : 0));
1428                         return 0;
1429
1430                 case TIOCGSERIAL:
1431                         return isicom_get_serial_info(port, argp);
1432
1433                 case TIOCSSERIAL:
1434                         return isicom_set_serial_info(port, argp);
1435
1436                 default:
1437                         return -ENOIOCTLCMD;
1438         }
1439         return 0;
1440 }
1441
1442 /* set_termios et all */
1443 static void isicom_set_termios(struct tty_struct * tty, struct termios * old_termios)
1444 {
1445         struct isi_port * port = (struct isi_port *) tty->driver_data;
1446         unsigned long flags;
1447
1448         if (isicom_paranoia_check(port, tty->name, "isicom_set_termios"))
1449                 return;
1450
1451         if (tty->termios->c_cflag == old_termios->c_cflag &&
1452             tty->termios->c_iflag == old_termios->c_iflag)
1453                 return;
1454
1455         save_flags(flags); cli();
1456         isicom_config_port(port);
1457         restore_flags(flags);
1458
1459         if ((old_termios->c_cflag & CRTSCTS) &&
1460             !(tty->termios->c_cflag & CRTSCTS)) {
1461                 tty->hw_stopped = 0;
1462                 isicom_start(tty);
1463         }
1464 }
1465
1466 /* throttle et all */
1467 static void isicom_throttle(struct tty_struct * tty)
1468 {
1469         struct isi_port * port = (struct isi_port *) tty->driver_data;
1470         struct isi_board * card = port->card;
1471         unsigned long flags;
1472
1473         if (isicom_paranoia_check(port, tty->name, "isicom_throttle"))
1474                 return;
1475
1476         /* tell the card that this port cannot handle any more data for now */
1477         save_flags(flags); cli();
1478         card->port_status &= ~(1 << port->channel);
1479         outw(card->port_status, card->base + 0x02);
1480         restore_flags(flags);
1481 }
1482
1483 /* unthrottle et all */
1484 static void isicom_unthrottle(struct tty_struct * tty)
1485 {
1486         struct isi_port * port = (struct isi_port *) tty->driver_data;
1487         struct isi_board * card = port->card;
1488         unsigned long flags;
1489
1490         if (isicom_paranoia_check(port, tty->name, "isicom_unthrottle"))
1491                 return;
1492
1493         /* tell the card that this port is ready to accept more data */
1494         save_flags(flags); cli();
1495         card->port_status |= (1 << port->channel);
1496         outw(card->port_status, card->base + 0x02);
1497         restore_flags(flags);
1498 }
1499
1500 /* stop et all */
1501 static void isicom_stop(struct tty_struct * tty)
1502 {
1503         struct isi_port * port = (struct isi_port *) tty->driver_data;
1504
1505         if (isicom_paranoia_check(port, tty->name, "isicom_stop"))
1506                 return;
1507
1508         /* this tells the transmitter not to consider this port for
1509            data output to the card. */
1510         port->status &= ~ISI_TXOK;
1511 }
1512
1513 /* start et all */
1514 static void isicom_start(struct tty_struct * tty)
1515 {
1516         struct isi_port * port = (struct isi_port *) tty->driver_data;
1517
1518         if (isicom_paranoia_check(port, tty->name, "isicom_start"))
1519                 return;
1520
1521         /* this tells the transmitter to consider this port for
1522            data output to the card. */
1523         port->status |= ISI_TXOK;
1524 }
1525
1526 /* hangup et all */
1527 static void do_isicom_hangup(void * data)
1528 {
1529         struct isi_port * port = (struct isi_port *) data;
1530         struct tty_struct * tty;
1531
1532         tty = port->tty;
1533         if (tty)
1534                 tty_hangup(tty);        /* FIXME: module removal race here - AKPM */
1535 }
1536
1537 static void isicom_hangup(struct tty_struct * tty)
1538 {
1539         struct isi_port * port = (struct isi_port *) tty->driver_data;
1540
1541         if (isicom_paranoia_check(port, tty->name, "isicom_hangup"))
1542                 return;
1543
1544         isicom_shutdown_port(port);
1545         port->count = 0;
1546         port->flags &= ~ASYNC_NORMAL_ACTIVE;
1547         port->tty = NULL;
1548         wake_up_interruptible(&port->open_wait);
1549 }
1550
1551 /* flush_buffer et all */
1552 static void isicom_flush_buffer(struct tty_struct * tty)
1553 {
1554         struct isi_port * port = (struct isi_port *) tty->driver_data;
1555         unsigned long flags;
1556
1557         if (isicom_paranoia_check(port, tty->name, "isicom_flush_buffer"))
1558                 return;
1559
1560         save_flags(flags); cli();
1561         port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
1562         restore_flags(flags);
1563
1564         wake_up_interruptible(&tty->write_wait);
1565         tty_wakeup(tty);
1566 }
1567
1568
1569 static int register_ioregion(void)
1570 {
1571         int count, done=0;
1572         for (count=0; count < BOARD_COUNT; count++ ) {
1573                 if (isi_card[count].base)
1574                         if (!request_region(isi_card[count].base,16,ISICOM_NAME)) {
1575                                 printk(KERN_DEBUG "ISICOM: I/O Region 0x%x-0x%x is busy. Card%d will be disabled.\n",
1576                                         isi_card[count].base,isi_card[count].base+15,count+1);
1577                                 isi_card[count].base=0;
1578                                 done++;
1579                         }
1580         }
1581         return done;
1582 }
1583
1584 static void unregister_ioregion(void)
1585 {
1586         int count;
1587         for (count=0; count < BOARD_COUNT; count++ )
1588                 if (isi_card[count].base) {
1589                         release_region(isi_card[count].base,16);
1590 #ifdef ISICOM_DEBUG
1591                         printk(KERN_DEBUG "ISICOM: I/O Region 0x%x-0x%x released for Card%d.\n",isi_card[count].base,isi_card[count].base+15,count+1);
1592 #endif
1593                 }
1594 }
1595
1596 static struct tty_operations isicom_ops = {
1597         .open   = isicom_open,
1598         .close  = isicom_close,
1599         .write  = isicom_write,
1600         .put_char       = isicom_put_char,
1601         .flush_chars    = isicom_flush_chars,
1602         .write_room     = isicom_write_room,
1603         .chars_in_buffer        = isicom_chars_in_buffer,
1604         .ioctl  = isicom_ioctl,
1605         .set_termios    = isicom_set_termios,
1606         .throttle       = isicom_throttle,
1607         .unthrottle     = isicom_unthrottle,
1608         .stop   = isicom_stop,
1609         .start  = isicom_start,
1610         .hangup = isicom_hangup,
1611         .flush_buffer   = isicom_flush_buffer,
1612         .tiocmget       = isicom_tiocmget,
1613         .tiocmset       = isicom_tiocmset,
1614 };
1615
1616 static int register_drivers(void)
1617 {
1618         int error;
1619
1620         /* tty driver structure initialization */
1621         isicom_normal = alloc_tty_driver(PORT_COUNT);
1622         if (!isicom_normal)
1623                 return -ENOMEM;
1624
1625         isicom_normal->owner    = THIS_MODULE;
1626         isicom_normal->name     = "ttyM";
1627         isicom_normal->devfs_name = "isicom/";
1628         isicom_normal->major    = ISICOM_NMAJOR;
1629         isicom_normal->minor_start      = 0;
1630         isicom_normal->type     = TTY_DRIVER_TYPE_SERIAL;
1631         isicom_normal->subtype  = SERIAL_TYPE_NORMAL;
1632         isicom_normal->init_termios     = tty_std_termios;
1633         isicom_normal->init_termios.c_cflag     =
1634                                 B9600 | CS8 | CREAD | HUPCL |CLOCAL;
1635         isicom_normal->flags    = TTY_DRIVER_REAL_RAW;
1636         tty_set_operations(isicom_normal, &isicom_ops);
1637
1638         if ((error=tty_register_driver(isicom_normal))!=0) {
1639                 printk(KERN_DEBUG "ISICOM: Couldn't register the dialin driver, error=%d\n",
1640                         error);
1641                 put_tty_driver(isicom_normal);
1642                 return error;
1643         }
1644         return 0;
1645 }
1646
1647 static void unregister_drivers(void)
1648 {
1649         int error = tty_unregister_driver(isicom_normal);
1650         if (error)
1651                 printk(KERN_DEBUG "ISICOM: couldn't unregister normal driver error=%d.\n",error);
1652         put_tty_driver(isicom_normal);
1653 }
1654
1655 static int register_isr(void)
1656 {
1657         int count, done=0, card;
1658         int flag;
1659         unsigned char request;
1660         for (count=0; count < BOARD_COUNT; count++ ) {
1661                 if (isi_card[count].base) {
1662                 /*
1663                  * verify if the required irq has already been requested for
1664                  * another ISI Card, if so we already have it, else request it
1665                  */
1666                         request = YES;
1667                         for(card = 0; card < count; card++)
1668                         if ((isi_card[card].base) && (isi_card[card].irq == isi_card[count].irq)) {
1669                                 request = NO;
1670                                 if ((isi_card[count].isa == NO) && (isi_card[card].isa == NO))
1671                                         break;
1672                                 /*
1673                                  * ISA cards cannot share interrupts with other
1674                                  * PCI or ISA devices hence disable this card.
1675                                  */
1676                                 release_region(isi_card[count].base,16);
1677                                 isi_card[count].base = 0;
1678                                 break;
1679                         }
1680                         flag=0;
1681                         if(isi_card[count].isa == NO)
1682                                 flag |= SA_SHIRQ;
1683
1684                         if (request == YES) {
1685                                 if (request_irq(isi_card[count].irq, isicom_interrupt, SA_INTERRUPT|flag, ISICOM_NAME, NULL)) {
1686                                         printk(KERN_WARNING "ISICOM: Could not install handler at Irq %d. Card%d will be disabled.\n",
1687                                                 isi_card[count].irq, count+1);
1688                                         release_region(isi_card[count].base,16);
1689                                         isi_card[count].base=0;
1690                                 }
1691                                 else {
1692                                         printk(KERN_INFO "ISICOM: Card%d at 0x%x using irq %d.\n",
1693                                         count+1, isi_card[count].base, isi_card[count].irq);
1694
1695                                         irq_to_board[isi_card[count].irq]=&isi_card[count];
1696                                         done++;
1697                                 }
1698                         }
1699                 }
1700         }
1701         return done;
1702 }
1703
1704 static void unregister_isr(void)
1705 {
1706         int count, card;
1707         unsigned char freeirq;
1708         for (count=0; count < BOARD_COUNT; count++ ) {
1709                 if (isi_card[count].base) {
1710                         freeirq = YES;
1711                         for(card = 0; card < count; card++)
1712                                 if ((isi_card[card].base) && (isi_card[card].irq == isi_card[count].irq)) {
1713                                         freeirq = NO;
1714                                         break;
1715                                 }
1716                         if (freeirq == YES) {
1717                                 free_irq(isi_card[count].irq, NULL);
1718 #ifdef ISICOM_DEBUG
1719                                 printk(KERN_DEBUG "ISICOM: Irq %d released for Card%d.\n",isi_card[count].irq, count+1);
1720 #endif
1721                         }
1722                 }
1723         }
1724 }
1725
1726 static int isicom_init(void)
1727 {
1728         int card, channel, base;
1729         struct isi_port * port;
1730         unsigned long page;
1731
1732         if (!tmp_buf) {
1733                 page = get_zeroed_page(GFP_KERNEL);
1734                 if (!page) {
1735 #ifdef ISICOM_DEBUG
1736                         printk(KERN_DEBUG "ISICOM: Couldn't allocate page for tmp_buf.\n");
1737 #else
1738                         printk(KERN_ERR "ISICOM: Not enough memory...\n");
1739 #endif
1740                         return 0;
1741                 }
1742                 tmp_buf = (unsigned char *) page;
1743         }
1744
1745         if (!register_ioregion())
1746         {
1747                 printk(KERN_ERR "ISICOM: All required I/O space found busy.\n");
1748                 free_page((unsigned long)tmp_buf);
1749                 return 0;
1750         }
1751         if (register_drivers())
1752         {
1753                 unregister_ioregion();
1754                 free_page((unsigned long)tmp_buf);
1755                 return 0;
1756         }
1757         if (!register_isr())
1758         {
1759                 unregister_drivers();
1760                 /*  ioports already uregistered in register_isr */
1761                 free_page((unsigned long)tmp_buf);
1762                 return 0;
1763         }
1764
1765         memset(isi_ports, 0, sizeof(isi_ports));
1766         for (card = 0; card < BOARD_COUNT; card++) {
1767                 port = &isi_ports[card * 16];
1768                 isi_card[card].ports = port;
1769                 base = isi_card[card].base;
1770                 for (channel = 0; channel < 16; channel++, port++) {
1771                         port->magic = ISICOM_MAGIC;
1772                         port->card = &isi_card[card];
1773                         port->channel = channel;
1774                         port->close_delay = 50 * HZ/100;
1775                         port->closing_wait = 3000 * HZ/100;
1776                         INIT_WORK(&port->hangup_tq, do_isicom_hangup, port);
1777                         INIT_WORK(&port->bh_tqueue, isicom_bottomhalf, port);
1778                         port->status = 0;
1779                         init_waitqueue_head(&port->open_wait);
1780                         init_waitqueue_head(&port->close_wait);
1781                         /*  . . .  */
1782                 }
1783         }
1784
1785         return 1;
1786 }
1787
1788 /*
1789  *      Insmod can set static symbols so keep these static
1790  */
1791
1792 static int io[4];
1793 static int irq[4];
1794
1795 MODULE_AUTHOR("MultiTech");
1796 MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
1797 MODULE_LICENSE("GPL");
1798 MODULE_PARM(io, "1-4i");
1799 MODULE_PARM_DESC(io, "I/O ports for the cards");
1800 MODULE_PARM(irq, "1-4i");
1801 MODULE_PARM_DESC(irq, "Interrupts for the cards");
1802
1803 int init_module(void)
1804 {
1805         struct pci_dev *dev = NULL;
1806         int retval, card, idx, count;
1807         unsigned char pciirq;
1808         unsigned int ioaddr;
1809
1810         card = 0;
1811         for(idx=0; idx < BOARD_COUNT; idx++) {
1812                 if (io[idx]) {
1813                         isi_card[idx].base=io[idx];
1814                         isi_card[idx].irq=irq[idx];
1815                         isi_card[idx].isa=YES;
1816                         card++;
1817                 }
1818                 else {
1819                         isi_card[idx].base = 0;
1820                         isi_card[idx].irq = 0;
1821                 }
1822         }
1823
1824         for (idx=0 ;idx < card; idx++) {
1825                 if (!((isi_card[idx].irq==2)||(isi_card[idx].irq==3)||
1826                     (isi_card[idx].irq==4)||(isi_card[idx].irq==5)||
1827                     (isi_card[idx].irq==7)||(isi_card[idx].irq==10)||
1828                     (isi_card[idx].irq==11)||(isi_card[idx].irq==12)||
1829                     (isi_card[idx].irq==15))) {
1830
1831                         if (isi_card[idx].base) {
1832                                 printk(KERN_ERR "ISICOM: Irq %d unsupported. Disabling Card%d...\n",
1833                                         isi_card[idx].irq, idx+1);
1834                                 isi_card[idx].base=0;
1835                                 card--;
1836                         }
1837                 }
1838         }
1839
1840         if (card < BOARD_COUNT) {
1841                 for (idx=0; idx < DEVID_COUNT; idx++) {
1842                         dev = NULL;
1843                         for (;;){
1844                                 if (!(dev = pci_find_device(VENDOR_ID, isicom_pci_tbl[idx].device, dev)))
1845                                         break;
1846                                 if (card >= BOARD_COUNT)
1847                                         break;
1848
1849                                 if (pci_enable_device(dev))
1850                                         break;
1851
1852                                 /* found a PCI ISI card! */
1853                                 ioaddr = pci_resource_start (dev, 3); /* i.e at offset 0x1c in the
1854                                                                        * PCI configuration register
1855                                                                        * space.
1856                                                                        */
1857                                 pciirq = dev->irq;
1858                                 printk(KERN_INFO "ISI PCI Card(Device ID 0x%x)\n", isicom_pci_tbl[idx].device);
1859                                 /*
1860                                  * allot the first empty slot in the array
1861                                  */
1862                                 for (count=0; count < BOARD_COUNT; count++) {
1863                                         if (isi_card[count].base == 0) {
1864                                                 isi_card[count].base = ioaddr;
1865                                                 isi_card[count].irq = pciirq;
1866                                                 isi_card[count].isa = NO;
1867                                                 card++;
1868                                                 break;
1869                                         }
1870                                 }
1871                         }
1872                         if (card >= BOARD_COUNT) break;
1873                 }
1874         }
1875
1876         if (!(isi_card[0].base || isi_card[1].base || isi_card[2].base || isi_card[3].base)) {
1877                 printk(KERN_ERR "ISICOM: No valid card configuration. Driver cannot be initialized...\n");
1878                 return -EIO;
1879         }
1880
1881         retval = misc_register(&isiloader_device);
1882         if (retval < 0) {
1883                 printk(KERN_ERR "ISICOM: Unable to register firmware loader driver.\n");
1884                 return retval;
1885         }
1886
1887         if (!isicom_init()) {
1888                 if (misc_deregister(&isiloader_device))
1889                         printk(KERN_ERR "ISICOM: Unable to unregister Firmware Loader driver\n");
1890                 return -EIO;
1891         }
1892
1893         init_timer(&tx);
1894         tx.expires = jiffies + 1;
1895         tx.data = 0;
1896         tx.function = isicom_tx;
1897         re_schedule = 1;
1898         add_timer(&tx);
1899
1900         return 0;
1901 }
1902
1903 void cleanup_module(void)
1904 {
1905         re_schedule = 0;
1906         msleep(1000);
1907
1908 #ifdef ISICOM_DEBUG
1909         printk("ISICOM: isicom_tx tx_count = %ld.\n", tx_count);
1910 #endif
1911
1912 #ifdef ISICOM_DEBUG
1913         printk("ISICOM: uregistering isr ...\n");
1914 #endif
1915         unregister_isr();
1916
1917 #ifdef ISICOM_DEBUG
1918         printk("ISICOM: unregistering drivers ...\n");
1919 #endif
1920         unregister_drivers();
1921
1922 #ifdef ISICOM_DEBUG
1923         printk("ISICOM: unregistering ioregion ...\n");
1924 #endif
1925         unregister_ioregion();
1926
1927 #ifdef ISICOM_DEBUG
1928         printk("ISICOM: freeing tmp_buf ...\n");
1929 #endif
1930         free_page((unsigned long)tmp_buf);
1931
1932 #ifdef ISICOM_DEBUG
1933         printk("ISICOM: unregistering firmware loader ...\n");
1934 #endif
1935         if (misc_deregister(&isiloader_device))
1936                 printk(KERN_ERR "ISICOM: Unable to unregister Firmware Loader driver\n");
1937 }