drivers/i2c/chips/smsc47m1.c

   1 /*
   2     smsc47m1.c - Part of lm_sensors, Linux kernel modules
   3                  for hardware monitoring
   4
   5     Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x and LPC47M14x
   6     Super-I/O chips.
   7
   8     Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
   9     Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
  10     Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com>
  11                         and Jean Delvare
  12
  13     This program is free software; you can redistribute it and/or modify
  14     it under the terms of the GNU General Public License as published by
  15     the Free Software Foundation; either version 2 of the License, or
  16     (at your option) any later version.
  17
  18     This program is distributed in the hope that it will be useful,
  19     but WITHOUT ANY WARRANTY; without even the implied warranty of
  20     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21     GNU General Public License for more details.
  22
  23     You should have received a copy of the GNU General Public License
  24     along with this program; if not, write to the Free Software
  25     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26 */
  27
  28 #include <linux/module.h>
  29 #include <linux/slab.h>
  30 #include <linux/ioport.h>
  31 #include <linux/jiffies.h>
  32 #include <linux/i2c.h>
  33 #include <linux/i2c-sensor.h>
  34 #include <linux/init.h>
  35 #include <asm/io.h>
  36
  37 static unsigned short normal_i2c[] = { I2C_CLIENT_END };
  38 /* Address is autodetected, there is no default value */
  39 static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
  40 static struct i2c_force_data forces[] = {{NULL}};
  41
  42 enum chips { any_chip, smsc47m1 };
  43 static struct i2c_address_data addr_data = {
  44         .normal_i2c             = normal_i2c,
  45         .normal_isa             = normal_isa,
  46         .forces                 = forces,
  47 };
  48
  49 /* Super-I/0 registers and commands */
  50
  51 #define REG     0x2e    /* The register to read/write */
  52 #define VAL     0x2f    /* The value to read/write */
  53
  54 static inline void
  55 superio_outb(int reg, int val)
  56 {
  57         outb(reg, REG);
  58         outb(val, VAL);
  59 }
  60
  61 static inline int
  62 superio_inb(int reg)
  63 {
  64         outb(reg, REG);
  65         return inb(VAL);
  66 }
  67
  68 /* logical device for fans is 0x0A */
  69 #define superio_select() superio_outb(0x07, 0x0A)
  70
  71 static inline void
  72 superio_enter(void)
  73 {
  74         outb(0x55, REG);
  75 }
  76
  77 static inline void
  78 superio_exit(void)
  79 {
  80         outb(0xAA, REG);
  81 }
  82
  83 #define SUPERIO_REG_ACT         0x30
  84 #define SUPERIO_REG_BASE        0x60
  85 #define SUPERIO_REG_DEVID       0x20
  86
  87 /* Logical device registers */
  88
  89 #define SMSC_EXTENT             0x80
  90
  91 /* nr is 0 or 1 in the macros below */
  92 #define SMSC47M1_REG_ALARM              0x04
  93 #define SMSC47M1_REG_TPIN(nr)           (0x34 - (nr))
  94 #define SMSC47M1_REG_PPIN(nr)           (0x36 - (nr))
  95 #define SMSC47M1_REG_PWM(nr)            (0x56 + (nr))
  96 #define SMSC47M1_REG_FANDIV             0x58
  97 #define SMSC47M1_REG_FAN(nr)            (0x59 + (nr))
  98 #define SMSC47M1_REG_FAN_PRELOAD(nr)    (0x5B + (nr))
  99
 100 #define MIN_FROM_REG(reg,div)           ((reg)>=192 ? 0 : \
 101                                          983040/((192-(reg))*(div)))
 102 #define FAN_FROM_REG(reg,div,preload)   ((reg)<=(preload) || (reg)==255 ? 0 : \
 103                                          983040/(((reg)-(preload))*(div)))
 104 #define DIV_FROM_REG(reg)               (1 << (reg))
 105 #define PWM_FROM_REG(reg)               (((reg) & 0x7E) << 1)
 106 #define PWM_EN_FROM_REG(reg)            ((~(reg)) & 0x01)
 107 #define PWM_TO_REG(reg)                 (((reg) >> 1) & 0x7E)
 108
 109 struct smsc47m1_data {
 110         struct i2c_client client;
 111         struct semaphore lock;
 112
 113         struct semaphore update_lock;
 114         unsigned long last_updated;     /* In jiffies */
 115
 116         u8 fan[2];              /* Register value */
 117         u8 fan_preload[2];      /* Register value */
 118         u8 fan_div[2];          /* Register encoding, shifted right */
 119         u8 alarms;              /* Register encoding */
 120         u8 pwm[2];              /* Register value (bit 7 is enable) */
 121 };
 122
 123
 124 static int smsc47m1_attach_adapter(struct i2c_adapter *adapter);
 125 static int smsc47m1_find(int *address);
 126 static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind);
 127 static int smsc47m1_detach_client(struct i2c_client *client);
 128
 129 static int smsc47m1_read_value(struct i2c_client *client, u8 reg);
 130 static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value);
 131
 132 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
 133                 int init);
 134
 135
 136 static struct i2c_driver smsc47m1_driver = {
 137         .owner          = THIS_MODULE,
 138         .name           = "smsc47m1",
 139         .id             = I2C_DRIVERID_SMSC47M1,
 140         .flags          = I2C_DF_NOTIFY,
 141         .attach_adapter = smsc47m1_attach_adapter,
 142         .detach_client  = smsc47m1_detach_client,
 143 };
 144
 145 /* nr is 0 or 1 in the callback functions below */
 146
 147 static ssize_t get_fan(struct device *dev, char *buf, int nr)
 148 {
 149         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 150         /* This chip (stupidly) stops monitoring fan speed if PWM is
 151            enabled and duty cycle is 0%. This is fine if the monitoring
 152            and control concern the same fan, but troublesome if they are
 153            not (which could as well happen). */
 154         int rpm = (data->pwm[nr] & 0x7F) == 0x00 ? 0 :
 155                   FAN_FROM_REG(data->fan[nr],
 156                                DIV_FROM_REG(data->fan_div[nr]),
 157                                data->fan_preload[nr]);
 158         return sprintf(buf, "%d\n", rpm);
 159 }
 160
 161 static ssize_t get_fan_min(struct device *dev, char *buf, int nr)
 162 {
 163         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 164         int rpm = MIN_FROM_REG(data->fan_preload[nr],
 165                                DIV_FROM_REG(data->fan_div[nr]));
 166         return sprintf(buf, "%d\n", rpm);
 167 }
 168
 169 static ssize_t get_fan_div(struct device *dev, char *buf, int nr)
 170 {
 171         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 172         return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
 173 }
 174
 175 static ssize_t get_pwm(struct device *dev, char *buf, int nr)
 176 {
 177         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 178         return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
 179 }
 180
 181 static ssize_t get_pwm_en(struct device *dev, char *buf, int nr)
 182 {
 183         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 184         return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[nr]));
 185 }
 186
 187 static ssize_t get_alarms(struct device *dev, char *buf)
 188 {
 189         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 190         return sprintf(buf, "%d\n", data->alarms);
 191 }
 192
 193 static ssize_t set_fan_min(struct device *dev, const char *buf,
 194                 size_t count, int nr)
 195 {
 196         struct i2c_client *client = to_i2c_client(dev);
 197         struct smsc47m1_data *data = i2c_get_clientdata(client);
 198         long rpmdiv, val = simple_strtol(buf, NULL, 10);
 199
 200         down(&data->update_lock);
 201         rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]);
 202
 203         if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) {
 204                 up(&data->update_lock);
 205                 return -EINVAL;
 206         }
 207
 208         data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv);
 209         smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
 210                              data->fan_preload[nr]);
 211         up(&data->update_lock);
 212
 213         return count;
 214 }
 215
 216 /* Note: we save and restore the fan minimum here, because its value is
 217    determined in part by the fan clock divider.  This follows the principle
 218    of least suprise; the user doesn't expect the fan minimum to change just
 219    because the divider changed. */
 220 static ssize_t set_fan_div(struct device *dev, const char *buf,
 221                 size_t count, int nr)
 222 {
 223         struct i2c_client *client = to_i2c_client(dev);
 224         struct smsc47m1_data *data = i2c_get_clientdata(client);
 225
 226         long new_div = simple_strtol(buf, NULL, 10), tmp;
 227         u8 old_div = DIV_FROM_REG(data->fan_div[nr]);
 228
 229         if (new_div == old_div) /* No change */
 230                 return count;
 231
 232         down(&data->update_lock);
 233         switch (new_div) {
 234         case 1: data->fan_div[nr] = 0; break;
 235         case 2: data->fan_div[nr] = 1; break;
 236         case 4: data->fan_div[nr] = 2; break;
 237         case 8: data->fan_div[nr] = 3; break;
 238         default:
 239                 up(&data->update_lock);
 240                 return -EINVAL;
 241         }
 242
 243         tmp = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV) & 0x0F;
 244         tmp |= (data->fan_div[0] << 4) | (data->fan_div[1] << 6);
 245         smsc47m1_write_value(client, SMSC47M1_REG_FANDIV, tmp);
 246
 247         /* Preserve fan min */
 248         tmp = 192 - (old_div * (192 - data->fan_preload[nr])
 249                      + new_div / 2) / new_div;
 250         data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191);
 251         smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
 252                              data->fan_preload[nr]);
 253         up(&data->update_lock);
 254
 255         return count;
 256 }
 257
 258 static ssize_t set_pwm(struct device *dev, const char *buf,
 259                 size_t count, int nr)
 260 {
 261         struct i2c_client *client = to_i2c_client(dev);
 262         struct smsc47m1_data *data = i2c_get_clientdata(client);
 263
 264         long val = simple_strtol(buf, NULL, 10);
 265
 266         if (val < 0 || val > 255)
 267                 return -EINVAL;
 268
 269         down(&data->update_lock);
 270         data->pwm[nr] &= 0x81; /* Preserve additional bits */
 271         data->pwm[nr] |= PWM_TO_REG(val);
 272         smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
 273                              data->pwm[nr]);
 274         up(&data->update_lock);
 275
 276         return count;
 277 }
 278
 279 static ssize_t set_pwm_en(struct device *dev, const char *buf,
 280                 size_t count, int nr)
 281 {
 282         struct i2c_client *client = to_i2c_client(dev);
 283         struct smsc47m1_data *data = i2c_get_clientdata(client);
 284
 285         long val = simple_strtol(buf, NULL, 10);
 286
 287         if (val != 0 && val != 1)
 288                 return -EINVAL;
 289
 290         down(&data->update_lock);
 291         data->pwm[nr] &= 0xFE; /* preserve the other bits */
 292         data->pwm[nr] |= !val;
 293         smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
 294                              data->pwm[nr]);
 295         up(&data->update_lock);
 296
 297         return count;
 298 }
 299
 300 #define fan_present(offset)                                             \
 301 static ssize_t get_fan##offset (struct device *dev, char *buf)          \
 302 {                                                                       \
 303         return get_fan(dev, buf, offset - 1);                           \
 304 }                                                                       \
 305 static ssize_t get_fan##offset##_min (struct device *dev, char *buf)    \
 306 {                                                                       \
 307         return get_fan_min(dev, buf, offset - 1);                       \
 308 }                                                                       \
 309 static ssize_t set_fan##offset##_min (struct device *dev,               \
 310                 const char *buf, size_t count)                          \
 311 {                                                                       \
 312         return set_fan_min(dev, buf, count, offset - 1);                \
 313 }                                                                       \
 314 static ssize_t get_fan##offset##_div (struct device *dev, char *buf)    \
 315 {                                                                       \
 316         return get_fan_div(dev, buf, offset - 1);                       \
 317 }                                                                       \
 318 static ssize_t set_fan##offset##_div (struct device *dev,               \
 319                 const char *buf, size_t count)                          \
 320 {                                                                       \
 321         return set_fan_div(dev, buf, count, offset - 1);                \
 322 }                                                                       \
 323 static ssize_t get_pwm##offset (struct device *dev, char *buf)          \
 324 {                                                                       \
 325         return get_pwm(dev, buf, offset - 1);                           \
 326 }                                                                       \
 327 static ssize_t set_pwm##offset (struct device *dev,                     \
 328                 const char *buf, size_t count)                          \
 329 {                                                                       \
 330         return set_pwm(dev, buf, count, offset - 1);                    \
 331 }                                                                       \
 332 static ssize_t get_pwm##offset##_en (struct device *dev, char *buf)     \
 333 {                                                                       \
 334         return get_pwm_en(dev, buf, offset - 1);                        \
 335 }                                                                       \
 336 static ssize_t set_pwm##offset##_en (struct device *dev,                \
 337                 const char *buf, size_t count)                          \
 338 {                                                                       \
 339         return set_pwm_en(dev, buf, count, offset - 1);                 \
 340 }                                                                       \
 341 static DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan##offset,       \
 342                 NULL);                                                  \
 343 static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,                \
 344                 get_fan##offset##_min, set_fan##offset##_min);          \
 345 static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,                \
 346                 get_fan##offset##_div, set_fan##offset##_div);          \
 347 static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,                      \
 348                 get_pwm##offset, set_pwm##offset);                      \
 349 static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR,             \
 350                 get_pwm##offset##_en, set_pwm##offset##_en);
 351
 352 fan_present(1);
 353 fan_present(2);
 354
 355 static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL);
 356
 357 static int smsc47m1_attach_adapter(struct i2c_adapter *adapter)
 358 {
 359         if (!(adapter->class & I2C_CLASS_HWMON))
 360                 return 0;
 361         return i2c_detect(adapter, &addr_data, smsc47m1_detect);
 362 }
 363
 364 static int smsc47m1_find(int *address)
 365 {
 366         u8 val;
 367
 368         superio_enter();
 369         val = superio_inb(SUPERIO_REG_DEVID);
 370
 371         /*
 372          * SMSC LPC47M10x/LPC47M13x (device id 0x59), LPC47M14x (device id
 373          * 0x5F) and LPC47B27x (device id 0x51) have fan control.
 374          * The LPC47M15x and LPC47M192 chips "with hardware monitoring block"
 375          * can do much more besides (device id 0x60, unsupported).
 376          */
 377         if (val == 0x51)
 378                 printk(KERN_INFO "smsc47m1: Found SMSC47B27x\n");
 379         else if (val == 0x59)
 380                 printk(KERN_INFO "smsc47m1: Found SMSC47M10x/SMSC47M13x\n");
 381         else if (val == 0x5F)
 382                 printk(KERN_INFO "smsc47m1: Found SMSC47M14x\n");
 383         else {
 384                 superio_exit();
 385                 return -ENODEV;
 386         }
 387
 388         superio_select();
 389         *address = (superio_inb(SUPERIO_REG_BASE) << 8)
 390                  |  superio_inb(SUPERIO_REG_BASE + 1);
 391         val = superio_inb(SUPERIO_REG_ACT);
 392         if (*address == 0 || (val & 0x01) == 0) {
 393                 printk(KERN_INFO "smsc47m1: Device is disabled, will not use\n");
 394                 superio_exit();
 395                 return -ENODEV;
 396         }
 397
 398         superio_exit();
 399         return 0;
 400 }
 401
 402 static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind)
 403 {
 404         struct i2c_client *new_client;
 405         struct smsc47m1_data *data;
 406         int err = 0;
 407         int fan1, fan2, pwm1, pwm2;
 408
 409         if (!i2c_is_isa_adapter(adapter)) {
 410                 return 0;
 411         }
 412
 413         if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.name)) {
 414                 dev_err(&adapter->dev, "Region 0x%x already in use!\n", address);
 415                 return -EBUSY;
 416         }
 417
 418         if (!(data = kmalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) {
 419                 err = -ENOMEM;
 420                 goto error_release;
 421         }
 422         memset(data, 0x00, sizeof(struct smsc47m1_data));
 423
 424         new_client = &data->client;
 425         i2c_set_clientdata(new_client, data);
 426         new_client->addr = address;
 427         init_MUTEX(&data->lock);
 428         new_client->adapter = adapter;
 429         new_client->driver = &smsc47m1_driver;
 430         new_client->flags = 0;
 431
 432         strlcpy(new_client->name, "smsc47m1", I2C_NAME_SIZE);
 433         init_MUTEX(&data->update_lock);
 434
 435         /* If no function is properly configured, there's no point in
 436            actually registering the chip. */
 437         fan1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(0)) & 0x05)
 438                == 0x05;
 439         fan2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(1)) & 0x05)
 440                == 0x05;
 441         pwm1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(0)) & 0x05)
 442                == 0x04;
 443         pwm2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(1)) & 0x05)
 444                == 0x04;
 445         if (!(fan1 || fan2 || pwm1 || pwm2)) {
 446                 dev_warn(&new_client->dev, "Device is not configured, will not use\n");
 447                 err = -ENODEV;
 448                 goto error_free;
 449         }
 450
 451         if ((err = i2c_attach_client(new_client)))
 452                 goto error_free;
 453
 454         /* Some values (fan min, clock dividers, pwm registers) may be
 455            needed before any update is triggered, so we better read them
 456            at least once here. We don't usually do it that way, but in
 457            this particular case, manually reading 5 registers out of 8
 458            doesn't make much sense and we're better using the existing
 459            function. */
 460         smsc47m1_update_device(&new_client->dev, 1);
 461
 462         if (fan1) {
 463                 device_create_file(&new_client->dev, &dev_attr_fan1_input);
 464                 device_create_file(&new_client->dev, &dev_attr_fan1_min);
 465                 device_create_file(&new_client->dev, &dev_attr_fan1_div);
 466         } else
 467                 dev_dbg(&new_client->dev, "Fan 1 not enabled by hardware, "
 468                         "skipping\n");
 469
 470         if (fan2) {
 471                 device_create_file(&new_client->dev, &dev_attr_fan2_input);
 472                 device_create_file(&new_client->dev, &dev_attr_fan2_min);
 473                 device_create_file(&new_client->dev, &dev_attr_fan2_div);
 474         } else
 475                 dev_dbg(&new_client->dev, "Fan 2 not enabled by hardware, "
 476                         "skipping\n");
 477
 478         if (pwm1) {
 479                 device_create_file(&new_client->dev, &dev_attr_pwm1);
 480                 device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
 481         } else
 482                 dev_dbg(&new_client->dev, "PWM 1 not enabled by hardware, "
 483                         "skipping\n");
 484         if (pwm2) {
 485                 device_create_file(&new_client->dev, &dev_attr_pwm2);
 486                 device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
 487         } else
 488                 dev_dbg(&new_client->dev, "PWM 2 not enabled by hardware, "
 489                         "skipping\n");
 490
 491         device_create_file(&new_client->dev, &dev_attr_alarms);
 492
 493         return 0;
 494
 495 error_free:
 496         kfree(new_client);
 497 error_release:
 498         release_region(address, SMSC_EXTENT);
 499         return err;
 500 }
 501
 502 static int smsc47m1_detach_client(struct i2c_client *client)
 503 {
 504         int err;
 505
 506         if ((err = i2c_detach_client(client))) {
 507                 dev_err(&client->dev, "Client deregistration failed, "
 508                         "client not detached.\n");
 509                 return err;
 510         }
 511
 512         release_region(client->addr, SMSC_EXTENT);
 513         kfree(i2c_get_clientdata(client));
 514
 515         return 0;
 516 }
 517
 518 static int smsc47m1_read_value(struct i2c_client *client, u8 reg)
 519 {
 520         int res;
 521
 522         down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 523         res = inb_p(client->addr + reg);
 524         up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 525         return res;
 526 }
 527
 528 static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value)
 529 {
 530         down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 531         outb_p(value, client->addr + reg);
 532         up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 533 }
 534
 535 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
 536                 int init)
 537 {
 538         struct i2c_client *client = to_i2c_client(dev);
 539         struct smsc47m1_data *data = i2c_get_clientdata(client);
 540
 541         down(&data->update_lock);
 542
 543         if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
 544                 int i;
 545
 546                 for (i = 0; i < 2; i++) {
 547                         data->fan[i] = smsc47m1_read_value(client,
 548                                        SMSC47M1_REG_FAN(i));
 549                         data->fan_preload[i] = smsc47m1_read_value(client,
 550                                                SMSC47M1_REG_FAN_PRELOAD(i));
 551                         data->pwm[i] = smsc47m1_read_value(client,
 552                                        SMSC47M1_REG_PWM(i));
 553                 }
 554
 555                 i = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV);
 556                 data->fan_div[0] = (i >> 4) & 0x03;
 557                 data->fan_div[1] = i >> 6;
 558
 559                 data->alarms = smsc47m1_read_value(client,
 560                                SMSC47M1_REG_ALARM) >> 6;
 561                 /* Clear alarms if needed */
 562                 if (data->alarms)
 563                         smsc47m1_write_value(client, SMSC47M1_REG_ALARM, 0xC0);
 564
 565                 data->last_updated = jiffies;
 566         }
 567
 568         up(&data->update_lock);
 569         return data;
 570 }
 571
 572 static int __init sm_smsc47m1_init(void)
 573 {
 574         if (smsc47m1_find(normal_isa)) {
 575                 return -ENODEV;
 576         }
 577
 578         return i2c_add_driver(&smsc47m1_driver);
 579 }
 580
 581 static void __exit sm_smsc47m1_exit(void)
 582 {
 583         i2c_del_driver(&smsc47m1_driver);
 584 }
 585
 586 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
 587 MODULE_DESCRIPTION("SMSC LPC47M1xx fan sensors driver");
 588 MODULE_LICENSE("GPL");
 589
 590 module_init(sm_smsc47m1_init);
 591 module_exit(sm_smsc47m1_exit);