drivers/ide/ide-floppy.c

   1 /*
   2  * linux/drivers/ide/ide-floppy.c       Version 0.99    Feb 24 2002
   3  *
   4  * Copyright (C) 1996 - 1999 Gadi Oxman <gadio@netvision.net.il>
   5  * Copyright (C) 2000 - 2002 Paul Bristow <paul@paulbristow.net>
   6  */
   7
   8 /*
   9  * IDE ATAPI floppy driver.
  10  *
  11  * The driver currently doesn't have any fancy features, just the bare
  12  * minimum read/write support.
  13  *
  14  * This driver supports the following IDE floppy drives:
  15  *
  16  * LS-120/240 SuperDisk
  17  * Iomega Zip 100/250
  18  * Iomega PC Card Clik!/PocketZip
  19  *
  20  * Many thanks to Lode Leroy <Lode.Leroy@www.ibase.be>, who tested so many
  21  * ALPHA patches to this driver on an EASYSTOR LS-120 ATAPI floppy drive.
  22  *
  23  * Ver 0.1   Oct 17 96   Initial test version, mostly based on ide-tape.c.
  24  * Ver 0.2   Oct 31 96   Minor changes.
  25  * Ver 0.3   Dec  2 96   Fixed error recovery bug.
  26  * Ver 0.4   Jan 26 97   Add support for the HDIO_GETGEO ioctl.
  27  * Ver 0.5   Feb 21 97   Add partitions support.
  28  *                       Use the minimum of the LBA and CHS capacities.
  29  *                       Avoid hwgroup->rq == NULL on the last irq.
  30  *                       Fix potential null dereferencing with DEBUG_LOG.
  31  * Ver 0.8   Dec  7 97   Increase irq timeout from 10 to 50 seconds.
  32  *                       Add media write-protect detection.
  33  *                       Issue START command only if TEST UNIT READY fails.
  34  *                       Add work-around for IOMEGA ZIP revision 21.D.
  35  *                       Remove idefloppy_get_capabilities().
  36  * Ver 0.9   Jul  4 99   Fix a bug which might have caused the number of
  37  *                        bytes requested on each interrupt to be zero.
  38  *                        Thanks to <shanos@es.co.nz> for pointing this out.
  39  * Ver 0.9.sv Jan 6 01   Sam Varshavchik <mrsam@courier-mta.com>
  40  *                       Implement low level formatting.  Reimplemented
  41  *                       IDEFLOPPY_CAPABILITIES_PAGE, since we need the srfp
  42  *                       bit.  My LS-120 drive barfs on
  43  *                       IDEFLOPPY_CAPABILITIES_PAGE, but maybe it's just me.
  44  *                       Compromise by not reporting a failure to get this
  45  *                       mode page.  Implemented four IOCTLs in order to
  46  *                       implement formatting.  IOCTls begin with 0x4600,
  47  *                       0x46 is 'F' as in Format.
  48  *            Jan 9 01   Userland option to select format verify.
  49  *                       Added PC_SUPPRESS_ERROR flag - some idefloppy drives
  50  *                       do not implement IDEFLOPPY_CAPABILITIES_PAGE, and
  51  *                       return a sense error.  Suppress error reporting in
  52  *                       this particular case in order to avoid spurious
  53  *                       errors in syslog.  The culprit is
  54  *                       idefloppy_get_capability_page(), so move it to
  55  *                       idefloppy_begin_format() so that it's not used
  56  *                       unless absolutely necessary.
  57  *                       If drive does not support format progress indication
  58  *                       monitor the dsc bit in the status register.
  59  *                       Also, O_NDELAY on open will allow the device to be
  60  *                       opened without a disk available.  This can be used to
  61  *                       open an unformatted disk, or get the device capacity.
  62  * Ver 0.91  Dec 11 99   Added IOMEGA Clik! drive support by
  63  *                 <paul@paulbristow.net>
  64  * Ver 0.92  Oct 22 00   Paul Bristow became official maintainer for this
  65  *                         driver.  Included Powerbook internal zip kludge.
  66  * Ver 0.93  Oct 24 00   Fixed bugs for Clik! drive
  67  *                        no disk on insert and disk change now works
  68  * Ver 0.94  Oct 27 00   Tidied up to remove strstr(Clik) everywhere
  69  * Ver 0.95  Nov  7 00   Brought across to kernel 2.4
  70  * Ver 0.96  Jan  7 01   Actually in line with release version of 2.4.0
  71  *                       including set_bit patch from Rusty Russell
  72  * Ver 0.97  Jul 22 01   Merge 0.91-0.96 onto 0.9.sv for ac series
  73  * Ver 0.97.sv Aug 3 01  Backported from 2.4.7-ac3
  74  * Ver 0.98  Oct 26 01   Split idefloppy_transfer_pc into two pieces to
  75  *                        fix a lost interrupt problem. It appears the busy
  76  *                        bit was being deasserted by my IOMEGA ATAPI ZIP 100
  77  *                        drive before the drive was actually ready.
  78  * Ver 0.98a Oct 29 01   Expose delay value so we can play.
  79  * Ver 0.99  Feb 24 02   Remove duplicate code, modify clik! detection code
  80  *                        to support new PocketZip drives
  81  */
  82
  83 #define IDEFLOPPY_VERSION "0.99.newide"
  84
  85 #include <linux/config.h>
  86 #include <linux/module.h>
  87 #include <linux/types.h>
  88 #include <linux/string.h>
  89 #include <linux/kernel.h>
  90 #include <linux/delay.h>
  91 #include <linux/timer.h>
  92 #include <linux/mm.h>
  93 #include <linux/interrupt.h>
  94 #include <linux/major.h>
  95 #include <linux/errno.h>
  96 #include <linux/genhd.h>
  97 #include <linux/slab.h>
  98 #include <linux/cdrom.h>
  99 #include <linux/ide.h>
 100
 101 #include <asm/byteorder.h>
 102 #include <asm/irq.h>
 103 #include <asm/uaccess.h>
 104 #include <asm/io.h>
 105 #include <asm/unaligned.h>
 106 #include <asm/bitops.h>
 107
 108 /*
 109  *      The following are used to debug the driver.
 110  */
 111 #define IDEFLOPPY_DEBUG_LOG             0
 112 #define IDEFLOPPY_DEBUG_INFO            0
 113 #define IDEFLOPPY_DEBUG_BUGS            1
 114
 115 /* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */
 116 #define IDEFLOPPY_DEBUG( fmt, args... )
 117
 118 #if IDEFLOPPY_DEBUG_LOG
 119 #define debug_log printk
 120 #else
 121 #define debug_log(fmt, args... ) do {} while(0)
 122 #endif
 123
 124
 125 /*
 126  *      Some drives require a longer irq timeout.
 127  */
 128 #define IDEFLOPPY_WAIT_CMD              (5 * WAIT_CMD)
 129
 130 /*
 131  *      After each failed packet command we issue a request sense command
 132  *      and retry the packet command IDEFLOPPY_MAX_PC_RETRIES times.
 133  */
 134 #define IDEFLOPPY_MAX_PC_RETRIES        3
 135
 136 /*
 137  *      With each packet command, we allocate a buffer of
 138  *      IDEFLOPPY_PC_BUFFER_SIZE bytes.
 139  */
 140 #define IDEFLOPPY_PC_BUFFER_SIZE        256
 141
 142 /*
 143  *      In various places in the driver, we need to allocate storage
 144  *      for packet commands and requests, which will remain valid while
 145  *      we leave the driver to wait for an interrupt or a timeout event.
 146  */
 147 #define IDEFLOPPY_PC_STACK              (10 + IDEFLOPPY_MAX_PC_RETRIES)
 148
 149 /*
 150  *      Our view of a packet command.
 151  */
 152 typedef struct idefloppy_packet_command_s {
 153         u8 c[12];                               /* Actual packet bytes */
 154         int retries;                            /* On each retry, we increment retries */
 155         int error;                              /* Error code */
 156         int request_transfer;                   /* Bytes to transfer */
 157         int actually_transferred;               /* Bytes actually transferred */
 158         int buffer_size;                        /* Size of our data buffer */
 159         int b_count;                            /* Missing/Available data on the current buffer */
 160         struct request *rq;                     /* The corresponding request */
 161         u8 *buffer;                             /* Data buffer */
 162         u8 *current_position;                   /* Pointer into the above buffer */
 163         void (*callback) (ide_drive_t *);       /* Called when this packet command is completed */
 164         u8 pc_buffer[IDEFLOPPY_PC_BUFFER_SIZE]; /* Temporary buffer */
 165         unsigned long flags;                    /* Status/Action bit flags: long for set_bit */
 166 } idefloppy_pc_t;
 167
 168 /*
 169  *      Packet command flag bits.
 170  */
 171 #define PC_ABORT                        0       /* Set when an error is considered normal - We won't retry */
 172 #define PC_DMA_RECOMMENDED              2       /* 1 when we prefer to use DMA if possible */
 173 #define PC_DMA_IN_PROGRESS              3       /* 1 while DMA in progress */
 174 #define PC_DMA_ERROR                    4       /* 1 when encountered problem during DMA */
 175 #define PC_WRITING                      5       /* Data direction */
 176
 177 #define PC_SUPPRESS_ERROR               6       /* Suppress error reporting */
 178
 179 /*
 180  *      Removable Block Access Capabilities Page
 181  */
 182 typedef struct {
 183 #if defined(__LITTLE_ENDIAN_BITFIELD)
 184         unsigned        page_code       :6;     /* Page code - Should be 0x1b */
 185         unsigned        reserved1_6     :1;     /* Reserved */
 186         unsigned        ps              :1;     /* Should be 0 */
 187 #elif defined(__BIG_ENDIAN_BITFIELD)
 188         unsigned        ps              :1;     /* Should be 0 */
 189         unsigned        reserved1_6     :1;     /* Reserved */
 190         unsigned        page_code       :6;     /* Page code - Should be 0x1b */
 191 #else
 192 #error "Bitfield endianness not defined! Check your byteorder.h"
 193 #endif
 194         u8              page_length;            /* Page Length - Should be 0xa */
 195 #if defined(__LITTLE_ENDIAN_BITFIELD)
 196         unsigned        reserved2       :6;
 197         unsigned        srfp            :1;     /* Supports reporting progress of format */
 198         unsigned        sflp            :1;     /* System floppy type device */
 199         unsigned        tlun            :3;     /* Total logical units supported by the device */
 200         unsigned        reserved3       :3;
 201         unsigned        sml             :1;     /* Single / Multiple lun supported */
 202         unsigned        ncd             :1;     /* Non cd optical device */
 203 #elif defined(__BIG_ENDIAN_BITFIELD)
 204         unsigned        sflp            :1;     /* System floppy type device */
 205         unsigned        srfp            :1;     /* Supports reporting progress of format */
 206         unsigned        reserved2       :6;
 207         unsigned        ncd             :1;     /* Non cd optical device */
 208         unsigned        sml             :1;     /* Single / Multiple lun supported */
 209         unsigned        reserved3       :3;
 210         unsigned        tlun            :3;     /* Total logical units supported by the device */
 211 #else
 212 #error "Bitfield endianness not defined! Check your byteorder.h"
 213 #endif
 214         u8              reserved[8];
 215 } idefloppy_capabilities_page_t;
 216
 217 /*
 218  *      Flexible disk page.
 219  */
 220 typedef struct {
 221 #if defined(__LITTLE_ENDIAN_BITFIELD)
 222         unsigned        page_code       :6;     /* Page code - Should be 0x5 */
 223         unsigned        reserved1_6     :1;     /* Reserved */
 224         unsigned        ps              :1;     /* The device is capable of saving the page */
 225 #elif defined(__BIG_ENDIAN_BITFIELD)
 226         unsigned        ps              :1;     /* The device is capable of saving the page */
 227         unsigned        reserved1_6     :1;     /* Reserved */
 228         unsigned        page_code       :6;     /* Page code - Should be 0x5 */
 229 #else
 230 #error "Bitfield endianness not defined! Check your byteorder.h"
 231 #endif
 232         u8              page_length;            /* Page Length - Should be 0x1e */
 233         u16             transfer_rate;          /* In kilobits per second */
 234         u8              heads, sectors;         /* Number of heads, Number of sectors per track */
 235         u16             sector_size;            /* Byes per sector */
 236         u16             cyls;                   /* Number of cylinders */
 237         u8              reserved10[10];
 238         u8              motor_delay;            /* Motor off delay */
 239         u8              reserved21[7];
 240         u16             rpm;                    /* Rotations per minute */
 241         u8              reserved30[2];
 242 } idefloppy_flexible_disk_page_t;
 243
 244 /*
 245  *      Format capacity
 246  */
 247 typedef struct {
 248         u8              reserved[3];
 249         u8              length;                 /* Length of the following descriptors in bytes */
 250 } idefloppy_capacity_header_t;
 251
 252 typedef struct {
 253         u32             blocks;                 /* Number of blocks */
 254 #if defined(__LITTLE_ENDIAN_BITFIELD)
 255         unsigned        dc              :2;     /* Descriptor Code */
 256         unsigned        reserved        :6;
 257 #elif defined(__BIG_ENDIAN_BITFIELD)
 258         unsigned        reserved        :6;
 259         unsigned        dc              :2;     /* Descriptor Code */
 260 #else
 261 #error "Bitfield endianness not defined! Check your byteorder.h"
 262 #endif
 263         u8              length_msb;             /* Block Length (MSB)*/
 264         u16             length;                 /* Block Length */
 265 } idefloppy_capacity_descriptor_t;
 266
 267 #define CAPACITY_INVALID        0x00
 268 #define CAPACITY_UNFORMATTED    0x01
 269 #define CAPACITY_CURRENT        0x02
 270 #define CAPACITY_NO_CARTRIDGE   0x03
 271
 272 /*
 273  *      Most of our global data which we need to save even as we leave the
 274  *      driver due to an interrupt or a timer event is stored in a variable
 275  *      of type idefloppy_floppy_t, defined below.
 276  */
 277 typedef struct {
 278         ide_drive_t *drive;
 279
 280         /* Current packet command */
 281         idefloppy_pc_t *pc;
 282         /* Last failed packet command */
 283         idefloppy_pc_t *failed_pc;
 284         /* Packet command stack */
 285         idefloppy_pc_t pc_stack[IDEFLOPPY_PC_STACK];
 286         /* Next free packet command storage space */
 287         int pc_stack_index;
 288         struct request rq_stack[IDEFLOPPY_PC_STACK];
 289         /* We implement a circular array */
 290         int rq_stack_index;
 291
 292         /*
 293          *      Last error information
 294          */
 295         u8 sense_key, asc, ascq;
 296         /* delay this long before sending packet command */
 297         u8 ticks;
 298         int progress_indication;
 299
 300         /*
 301          *      Device information
 302          */
 303         /* Current format */
 304         int blocks, block_size, bs_factor;
 305         /* Last format capacity */
 306         idefloppy_capacity_descriptor_t capacity;
 307         /* Copy of the flexible disk page */
 308         idefloppy_flexible_disk_page_t flexible_disk_page;
 309         /* Write protect */
 310         int wp;
 311         /* Supports format progress report */
 312         int srfp;
 313         /* Status/Action flags */
 314         unsigned long flags;
 315 } idefloppy_floppy_t;
 316
 317 #define IDEFLOPPY_TICKS_DELAY   3       /* default delay for ZIP 100 */
 318
 319 /*
 320  *      Floppy flag bits values.
 321  */
 322 #define IDEFLOPPY_DRQ_INTERRUPT         0       /* DRQ interrupt device */
 323 #define IDEFLOPPY_MEDIA_CHANGED         1       /* Media may have changed */
 324 #define IDEFLOPPY_USE_READ12            2       /* Use READ12/WRITE12 or READ10/WRITE10 */
 325 #define IDEFLOPPY_FORMAT_IN_PROGRESS    3       /* Format in progress */
 326 #define IDEFLOPPY_CLIK_DRIVE            4       /* Avoid commands not supported in Clik drive */
 327 #define IDEFLOPPY_ZIP_DRIVE             5       /* Requires BH algorithm for packets */
 328
 329 /*
 330  *      ATAPI floppy drive packet commands
 331  */
 332 #define IDEFLOPPY_FORMAT_UNIT_CMD       0x04
 333 #define IDEFLOPPY_INQUIRY_CMD           0x12
 334 #define IDEFLOPPY_MODE_SELECT_CMD       0x55
 335 #define IDEFLOPPY_MODE_SENSE_CMD        0x5a
 336 #define IDEFLOPPY_READ10_CMD            0x28
 337 #define IDEFLOPPY_READ12_CMD            0xa8
 338 #define IDEFLOPPY_READ_CAPACITY_CMD     0x23
 339 #define IDEFLOPPY_REQUEST_SENSE_CMD     0x03
 340 #define IDEFLOPPY_PREVENT_REMOVAL_CMD   0x1e
 341 #define IDEFLOPPY_SEEK_CMD              0x2b
 342 #define IDEFLOPPY_START_STOP_CMD        0x1b
 343 #define IDEFLOPPY_TEST_UNIT_READY_CMD   0x00
 344 #define IDEFLOPPY_VERIFY_CMD            0x2f
 345 #define IDEFLOPPY_WRITE10_CMD           0x2a
 346 #define IDEFLOPPY_WRITE12_CMD           0xaa
 347 #define IDEFLOPPY_WRITE_VERIFY_CMD      0x2e
 348
 349 /*
 350  *      Defines for the mode sense command
 351  */
 352 #define MODE_SENSE_CURRENT              0x00
 353 #define MODE_SENSE_CHANGEABLE           0x01
 354 #define MODE_SENSE_DEFAULT              0x02
 355 #define MODE_SENSE_SAVED                0x03
 356
 357 /*
 358  *      IOCTLs used in low-level formatting.
 359  */
 360
 361 #define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED        0x4600
 362 #define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY     0x4601
 363 #define IDEFLOPPY_IOCTL_FORMAT_START            0x4602
 364 #define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS     0x4603
 365
 366 #if 0
 367 /*
 368  *      Special requests for our block device strategy routine.
 369  */
 370 #define IDEFLOPPY_FIRST_RQ      90
 371
 372 /*
 373  *      IDEFLOPPY_PC_RQ is used to queue a packet command in the request queue.
 374  */
 375 #define IDEFLOPPY_PC_RQ         90
 376
 377 #define IDEFLOPPY_LAST_RQ       90
 378
 379 /*
 380  *      A macro which can be used to check if a given request command
 381  *      originated in the driver or in the buffer cache layer.
 382  */
 383 #define IDEFLOPPY_RQ_CMD(cmd)   ((cmd >= IDEFLOPPY_FIRST_RQ) && (cmd <= IDEFLOPPY_LAST_RQ))
 384
 385 #endif
 386
 387 /*
 388  *      Error codes which are returned in rq->errors to the higher part
 389  *      of the driver.
 390  */
 391 #define IDEFLOPPY_ERROR_GENERAL         101
 392
 393 /*
 394  *      The following is used to format the general configuration word of
 395  *      the ATAPI IDENTIFY DEVICE command.
 396  */
 397 struct idefloppy_id_gcw {
 398 #if defined(__LITTLE_ENDIAN_BITFIELD)
 399         unsigned packet_size            :2;     /* Packet Size */
 400         unsigned reserved234            :3;     /* Reserved */
 401         unsigned drq_type               :2;     /* Command packet DRQ type */
 402         unsigned removable              :1;     /* Removable media */
 403         unsigned device_type            :5;     /* Device type */
 404         unsigned reserved13             :1;     /* Reserved */
 405         unsigned protocol               :2;     /* Protocol type */
 406 #elif defined(__BIG_ENDIAN_BITFIELD)
 407         unsigned protocol               :2;     /* Protocol type */
 408         unsigned reserved13             :1;     /* Reserved */
 409         unsigned device_type            :5;     /* Device type */
 410         unsigned removable              :1;     /* Removable media */
 411         unsigned drq_type               :2;     /* Command packet DRQ type */
 412         unsigned reserved234            :3;     /* Reserved */
 413         unsigned packet_size            :2;     /* Packet Size */
 414 #else
 415 #error "Bitfield endianness not defined! Check your byteorder.h"
 416 #endif
 417 };
 418
 419 /*
 420  *      INQUIRY packet command - Data Format
 421  */
 422 typedef struct {
 423 #if defined(__LITTLE_ENDIAN_BITFIELD)
 424         unsigned        device_type     :5;     /* Peripheral Device Type */
 425         unsigned        reserved0_765   :3;     /* Peripheral Qualifier - Reserved */
 426         unsigned        reserved1_6t0   :7;     /* Reserved */
 427         unsigned        rmb             :1;     /* Removable Medium Bit */
 428         unsigned        ansi_version    :3;     /* ANSI Version */
 429         unsigned        ecma_version    :3;     /* ECMA Version */
 430         unsigned        iso_version     :2;     /* ISO Version */
 431         unsigned        response_format :4;     /* Response Data Format */
 432         unsigned        reserved3_45    :2;     /* Reserved */
 433         unsigned        reserved3_6     :1;     /* TrmIOP - Reserved */
 434         unsigned        reserved3_7     :1;     /* AENC - Reserved */
 435 #elif defined(__BIG_ENDIAN_BITFIELD)
 436         unsigned        reserved0_765   :3;     /* Peripheral Qualifier - Reserved */
 437         unsigned        device_type     :5;     /* Peripheral Device Type */
 438         unsigned        rmb             :1;     /* Removable Medium Bit */
 439         unsigned        reserved1_6t0   :7;     /* Reserved */
 440         unsigned        iso_version     :2;     /* ISO Version */
 441         unsigned        ecma_version    :3;     /* ECMA Version */
 442         unsigned        ansi_version    :3;     /* ANSI Version */
 443         unsigned        reserved3_7     :1;     /* AENC - Reserved */
 444         unsigned        reserved3_6     :1;     /* TrmIOP - Reserved */
 445         unsigned        reserved3_45    :2;     /* Reserved */
 446         unsigned        response_format :4;     /* Response Data Format */
 447 #else
 448 #error "Bitfield endianness not defined! Check your byteorder.h"
 449 #endif
 450         u8              additional_length;      /* Additional Length (total_length-4) */
 451         u8              rsv5, rsv6, rsv7;       /* Reserved */
 452         u8              vendor_id[8];           /* Vendor Identification */
 453         u8              product_id[16];         /* Product Identification */
 454         u8              revision_level[4];      /* Revision Level */
 455         u8              vendor_specific[20];    /* Vendor Specific - Optional */
 456         u8              reserved56t95[40];      /* Reserved - Optional */
 457                                                 /* Additional information may be returned */
 458 } idefloppy_inquiry_result_t;
 459
 460 /*
 461  *      REQUEST SENSE packet command result - Data Format.
 462  */
 463 typedef struct {
 464 #if defined(__LITTLE_ENDIAN_BITFIELD)
 465         unsigned        error_code      :7;     /* Current error (0x70) */
 466         unsigned        valid           :1;     /* The information field conforms to SFF-8070i */
 467         u8              reserved1       :8;     /* Reserved */
 468         unsigned        sense_key       :4;     /* Sense Key */
 469         unsigned        reserved2_4     :1;     /* Reserved */
 470         unsigned        ili             :1;     /* Incorrect Length Indicator */
 471         unsigned        reserved2_67    :2;
 472 #elif defined(__BIG_ENDIAN_BITFIELD)
 473         unsigned        valid           :1;     /* The information field conforms to SFF-8070i */
 474         unsigned        error_code      :7;     /* Current error (0x70) */
 475         u8              reserved1       :8;     /* Reserved */
 476         unsigned        reserved2_67    :2;
 477         unsigned        ili             :1;     /* Incorrect Length Indicator */
 478         unsigned        reserved2_4     :1;     /* Reserved */
 479         unsigned        sense_key       :4;     /* Sense Key */
 480 #else
 481 #error "Bitfield endianness not defined! Check your byteorder.h"
 482 #endif
 483         u32             information __attribute__ ((packed));
 484         u8              asl;                    /* Additional sense length (n-7) */
 485         u32             command_specific;       /* Additional command specific information */
 486         u8              asc;                    /* Additional Sense Code */
 487         u8              ascq;                   /* Additional Sense Code Qualifier */
 488         u8              replaceable_unit_code;  /* Field Replaceable Unit Code */
 489         u8              sksv[3];
 490         u8              pad[2];                 /* Padding to 20 bytes */
 491 } idefloppy_request_sense_result_t;
 492
 493 /*
 494  *      Pages of the SELECT SENSE / MODE SENSE packet commands.
 495  */
 496 #define IDEFLOPPY_CAPABILITIES_PAGE     0x1b
 497 #define IDEFLOPPY_FLEXIBLE_DISK_PAGE    0x05
 498
 499 /*
 500  *      Mode Parameter Header for the MODE SENSE packet command
 501  */
 502 typedef struct {
 503         u16             mode_data_length;       /* Length of the following data transfer */
 504         u8              medium_type;            /* Medium Type */
 505 #if defined(__LITTLE_ENDIAN_BITFIELD)
 506         unsigned        reserved3       :7;
 507         unsigned        wp              :1;     /* Write protect */
 508 #elif defined(__BIG_ENDIAN_BITFIELD)
 509         unsigned        wp              :1;     /* Write protect */
 510         unsigned        reserved3       :7;
 511 #else
 512 #error "Bitfield endianness not defined! Check your byteorder.h"
 513 #endif
 514         u8              reserved[4];
 515 } idefloppy_mode_parameter_header_t;
 516
 517 /*
 518  *      Too bad. The drive wants to send us data which we are not ready to accept.
 519  *      Just throw it away.
 520  */
 521 static void idefloppy_discard_data (ide_drive_t *drive, unsigned int bcount)
 522 {
 523         while (bcount--)
 524                 (void) HWIF(drive)->INB(IDE_DATA_REG);
 525 }
 526
 527 #if IDEFLOPPY_DEBUG_BUGS
 528 static void idefloppy_write_zeros (ide_drive_t *drive, unsigned int bcount)
 529 {
 530         while (bcount--)
 531                 HWIF(drive)->OUTB(0, IDE_DATA_REG);
 532 }
 533 #endif /* IDEFLOPPY_DEBUG_BUGS */
 534
 535
 536 /*
 537  *      idefloppy_do_end_request is used to finish servicing a request.
 538  *
 539  *      For read/write requests, we will call ide_end_request to pass to the
 540  *      next buffer.
 541  */
 542 static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs)
 543 {
 544         idefloppy_floppy_t *floppy = drive->driver_data;
 545         struct request *rq = HWGROUP(drive)->rq;
 546         int error;
 547
 548         debug_log(KERN_INFO "Reached idefloppy_end_request\n");
 549
 550         switch (uptodate) {
 551                 case 0: error = IDEFLOPPY_ERROR_GENERAL; break;
 552                 case 1: error = 0; break;
 553                 default: error = uptodate;
 554         }
 555         if (error)
 556                 floppy->failed_pc = NULL;
 557         /* Why does this happen? */
 558         if (!rq)
 559                 return 0;
 560         if (!(rq->flags & REQ_SPECIAL)) { //if (!IDEFLOPPY_RQ_CMD (rq->cmd)) {
 561                 /* our real local end request function */
 562                 ide_end_request(drive, uptodate, nsecs);
 563                 return 0;
 564         }
 565         rq->errors = error;
 566         /* fixme: need to move this local also */
 567         ide_end_drive_cmd(drive, 0, 0);
 568         return 0;
 569 }
 570
 571 static void idefloppy_input_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount)
 572 {
 573         struct request *rq = pc->rq;
 574         struct bio_vec *bvec;
 575         struct bio *bio;
 576         unsigned long flags;
 577         char *data;
 578         int count, i, done = 0;
 579
 580         rq_for_each_bio(bio, rq) {
 581                 bio_for_each_segment(bvec, bio, i) {
 582                         if (!bcount)
 583                                 break;
 584
 585                         count = min(bvec->bv_len, bcount);
 586
 587                         data = bvec_kmap_irq(bvec, &flags);
 588                         atapi_input_bytes(drive, data, count);
 589                         bvec_kunmap_irq(data, &flags);
 590
 591                         bcount -= count;
 592                         pc->b_count += count;
 593                         done += count;
 594                 }
 595         }
 596
 597         idefloppy_do_end_request(drive, 1, done >> 9);
 598
 599         if (bcount) {
 600                 printk(KERN_ERR "%s: leftover data in idefloppy_input_buffers, bcount == %d\n", drive->name, bcount);
 601                 idefloppy_discard_data(drive, bcount);
 602         }
 603 }
 604
 605 static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount)
 606 {
 607         struct request *rq = pc->rq;
 608         struct bio *bio;
 609         struct bio_vec *bvec;
 610         unsigned long flags;
 611         int count, i, done = 0;
 612         char *data;
 613
 614         rq_for_each_bio(bio, rq) {
 615                 bio_for_each_segment(bvec, bio, i) {
 616                         if (!bcount)
 617                                 break;
 618
 619                         count = min(bvec->bv_len, bcount);
 620
 621                         data = bvec_kmap_irq(bvec, &flags);
 622                         atapi_output_bytes(drive, data, count);
 623                         bvec_kunmap_irq(data, &flags);
 624
 625                         bcount -= count;
 626                         pc->b_count += count;
 627                         done += count;
 628                 }
 629         }
 630
 631         idefloppy_do_end_request(drive, 1, done >> 9);
 632
 633         if (bcount) {
 634                 printk(KERN_ERR "%s: leftover data in idefloppy_output_buffers, bcount == %d\n", drive->name, bcount);
 635                 idefloppy_write_zeros(drive, bcount);
 636         }
 637 }
 638
 639 static void idefloppy_update_buffers (ide_drive_t *drive, idefloppy_pc_t *pc)
 640 {
 641         struct request *rq = pc->rq;
 642         struct bio *bio = rq->bio;
 643
 644         while ((bio = rq->bio) != NULL)
 645                 idefloppy_do_end_request(drive, 1, 0);
 646 }
 647
 648 /*
 649  *      idefloppy_queue_pc_head generates a new packet command request in front
 650  *      of the request queue, before the current request, so that it will be
 651  *      processed immediately, on the next pass through the driver.
 652  */
 653 static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,struct request *rq)
 654 {
 655         ide_init_drive_cmd(rq);
 656         rq->buffer = (char *) pc;
 657         rq->flags = REQ_SPECIAL;        //rq->cmd = IDEFLOPPY_PC_RQ;
 658         (void) ide_do_drive_cmd(drive, rq, ide_preempt);
 659 }
 660
 661 static idefloppy_pc_t *idefloppy_next_pc_storage (ide_drive_t *drive)
 662 {
 663         idefloppy_floppy_t *floppy = drive->driver_data;
 664
 665         if (floppy->pc_stack_index == IDEFLOPPY_PC_STACK)
 666                 floppy->pc_stack_index=0;
 667         return (&floppy->pc_stack[floppy->pc_stack_index++]);
 668 }
 669
 670 static struct request *idefloppy_next_rq_storage (ide_drive_t *drive)
 671 {
 672         idefloppy_floppy_t *floppy = drive->driver_data;
 673
 674         if (floppy->rq_stack_index == IDEFLOPPY_PC_STACK)
 675                 floppy->rq_stack_index = 0;
 676         return (&floppy->rq_stack[floppy->rq_stack_index++]);
 677 }
 678
 679 /*
 680  *      idefloppy_analyze_error is called on each failed packet command retry
 681  *      to analyze the request sense.
 682  */
 683 static void idefloppy_analyze_error (ide_drive_t *drive,idefloppy_request_sense_result_t *result)
 684 {
 685         idefloppy_floppy_t *floppy = drive->driver_data;
 686
 687         floppy->sense_key = result->sense_key;
 688         floppy->asc = result->asc;
 689         floppy->ascq = result->ascq;
 690         floppy->progress_indication = result->sksv[0] & 0x80 ?
 691                 (u16)get_unaligned((u16 *)(result->sksv+1)):0x10000;
 692         if (floppy->failed_pc)
 693                 debug_log(KERN_INFO "ide-floppy: pc = %x, sense key = %x, "
 694                         "asc = %x, ascq = %x\n", floppy->failed_pc->c[0],
 695                         result->sense_key, result->asc, result->ascq);
 696         else
 697                 debug_log(KERN_INFO "ide-floppy: sense key = %x, asc = %x, "
 698                         "ascq = %x\n", result->sense_key,
 699                         result->asc, result->ascq);
 700 }
 701
 702 static void idefloppy_request_sense_callback (ide_drive_t *drive)
 703 {
 704         idefloppy_floppy_t *floppy = drive->driver_data;
 705
 706         debug_log(KERN_INFO "ide-floppy: Reached %s\n", __FUNCTION__);
 707
 708         if (!floppy->pc->error) {
 709                 idefloppy_analyze_error(drive,(idefloppy_request_sense_result_t *) floppy->pc->buffer);
 710                 idefloppy_do_end_request(drive, 1, 0);
 711         } else {
 712                 printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting request!\n");
 713                 idefloppy_do_end_request(drive, 0, 0);
 714         }
 715 }
 716
 717 /*
 718  *      General packet command callback function.
 719  */
 720 static void idefloppy_pc_callback (ide_drive_t *drive)
 721 {
 722         idefloppy_floppy_t *floppy = drive->driver_data;
 723
 724         debug_log(KERN_INFO "ide-floppy: Reached %s\n", __FUNCTION__);
 725
 726         idefloppy_do_end_request(drive, floppy->pc->error ? 0 : 1, 0);
 727 }
 728
 729 /*
 730  *      idefloppy_init_pc initializes a packet command.
 731  */
 732 static void idefloppy_init_pc (idefloppy_pc_t *pc)
 733 {
 734         memset(pc->c, 0, 12);
 735         pc->retries = 0;
 736         pc->flags = 0;
 737         pc->request_transfer = 0;
 738         pc->buffer = pc->pc_buffer;
 739         pc->buffer_size = IDEFLOPPY_PC_BUFFER_SIZE;
 740         pc->callback = &idefloppy_pc_callback;
 741 }
 742
 743 static void idefloppy_create_request_sense_cmd (idefloppy_pc_t *pc)
 744 {
 745         idefloppy_init_pc(pc);
 746         pc->c[0] = IDEFLOPPY_REQUEST_SENSE_CMD;
 747         pc->c[4] = 255;
 748         pc->request_transfer = 18;
 749         pc->callback = &idefloppy_request_sense_callback;
 750 }
 751
 752 /*
 753  *      idefloppy_retry_pc is called when an error was detected during the
 754  *      last packet command. We queue a request sense packet command in
 755  *      the head of the request list.
 756  */
 757 static void idefloppy_retry_pc (ide_drive_t *drive)
 758 {
 759         idefloppy_pc_t *pc;
 760         struct request *rq;
 761         atapi_error_t error;
 762
 763         error.all = HWIF(drive)->INB(IDE_ERROR_REG);
 764         pc = idefloppy_next_pc_storage(drive);
 765         rq = idefloppy_next_rq_storage(drive);
 766         idefloppy_create_request_sense_cmd(pc);
 767         idefloppy_queue_pc_head(drive, pc, rq);
 768 }
 769
 770 /*
 771  *      idefloppy_pc_intr is the usual interrupt handler which will be called
 772  *      during a packet command.
 773  */
 774 static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
 775 {
 776         idefloppy_floppy_t *floppy = drive->driver_data;
 777         atapi_status_t status;
 778         atapi_bcount_t bcount;
 779         atapi_ireason_t ireason;
 780         idefloppy_pc_t *pc = floppy->pc;
 781         struct request *rq = pc->rq;
 782         unsigned int temp;
 783
 784         debug_log(KERN_INFO "ide-floppy: Reached %s interrupt handler\n",
 785                 __FUNCTION__);
 786
 787         if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
 788                 if (HWIF(drive)->ide_dma_end(drive)) {
 789                         set_bit(PC_DMA_ERROR, &pc->flags);
 790                 } else {
 791                         pc->actually_transferred = pc->request_transfer;
 792                         idefloppy_update_buffers(drive, pc);
 793                 }
 794                 debug_log(KERN_INFO "ide-floppy: DMA finished\n");
 795         }
 796
 797         /* Clear the interrupt */
 798         status.all = HWIF(drive)->INB(IDE_STATUS_REG);
 799
 800         if (!status.b.drq) {                    /* No more interrupts */
 801                 debug_log(KERN_INFO "Packet command completed, %d bytes "
 802                         "transferred\n", pc->actually_transferred);
 803                 clear_bit(PC_DMA_IN_PROGRESS, &pc->flags);
 804
 805                 local_irq_enable();
 806
 807                 if (status.b.check || test_bit(PC_DMA_ERROR, &pc->flags)) {
 808                         /* Error detected */
 809                         debug_log(KERN_INFO "ide-floppy: %s: I/O error\n",
 810                                 drive->name);
 811                         rq->errors++;
 812                         if (pc->c[0] == IDEFLOPPY_REQUEST_SENSE_CMD) {
 813                                 printk(KERN_ERR "ide-floppy: I/O error in "
 814                                         "request sense command\n");
 815                                 return ide_do_reset(drive);
 816                         }
 817                         /* Retry operation */
 818                         idefloppy_retry_pc(drive);
 819                         /* queued, but not started */
 820                         return ide_stopped;
 821                 }
 822                 pc->error = 0;
 823                 if (floppy->failed_pc == pc)
 824                         floppy->failed_pc = NULL;
 825                 /* Command finished - Call the callback function */
 826                 pc->callback(drive);
 827                 return ide_stopped;
 828         }
 829
 830         if (test_and_clear_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
 831                 printk(KERN_ERR "ide-floppy: The floppy wants to issue "
 832                         "more interrupts in DMA mode\n");
 833                 (void)__ide_dma_off(drive);
 834                 return ide_do_reset(drive);
 835         }
 836
 837         /* Get the number of bytes to transfer */
 838         bcount.b.high = HWIF(drive)->INB(IDE_BCOUNTH_REG);
 839         bcount.b.low = HWIF(drive)->INB(IDE_BCOUNTL_REG);
 840         /* on this interrupt */
 841         ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
 842
 843         if (ireason.b.cod) {
 844                 printk(KERN_ERR "ide-floppy: CoD != 0 in idefloppy_pc_intr\n");
 845                 return ide_do_reset(drive);
 846         }
 847         if (ireason.b.io == test_bit(PC_WRITING, &pc->flags)) {
 848                 /* Hopefully, we will never get here */
 849                 printk(KERN_ERR "ide-floppy: We wanted to %s, ",
 850                         ireason.b.io ? "Write":"Read");
 851                 printk(KERN_ERR "but the floppy wants us to %s !\n",
 852                         ireason.b.io ? "Read":"Write");
 853                 return ide_do_reset(drive);
 854         }
 855         if (!test_bit(PC_WRITING, &pc->flags)) {
 856                 /* Reading - Check that we have enough space */
 857                 temp = pc->actually_transferred + bcount.all;
 858                 if (temp > pc->request_transfer) {
 859                         if (temp > pc->buffer_size) {
 860                                 printk(KERN_ERR "ide-floppy: The floppy wants "
 861                                         "to send us more data than expected "
 862                                         "- discarding data\n");
 863                                 idefloppy_discard_data(drive,bcount.all);
 864                                 if (HWGROUP(drive)->handler != NULL)
 865                                         BUG();
 866                                 ide_set_handler(drive,
 867                                                 &idefloppy_pc_intr,
 868                                                 IDEFLOPPY_WAIT_CMD,
 869                                                 NULL);
 870                                 return ide_started;
 871                         }
 872                         debug_log(KERN_NOTICE "ide-floppy: The floppy wants to "
 873                                 "send us more data than expected - "
 874                                 "allowing transfer\n");
 875                 }
 876         }
 877         if (test_bit(PC_WRITING, &pc->flags)) {
 878                 if (pc->buffer != NULL)
 879                         /* Write the current buffer */
 880                         HWIF(drive)->atapi_output_bytes(drive,
 881                                                 pc->current_position,
 882                                                 bcount.all);
 883                 else
 884                         idefloppy_output_buffers(drive, pc, bcount.all);
 885         } else {
 886                 if (pc->buffer != NULL)
 887                         /* Read the current buffer */
 888                         HWIF(drive)->atapi_input_bytes(drive,
 889                                                 pc->current_position,
 890                                                 bcount.all);
 891                 else
 892                         idefloppy_input_buffers(drive, pc, bcount.all);
 893         }
 894         /* Update the current position */
 895         pc->actually_transferred += bcount.all;
 896         pc->current_position += bcount.all;
 897
 898         if (HWGROUP(drive)->handler != NULL)
 899                 BUG();
 900         ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);           /* And set the interrupt handler again */
 901         return ide_started;
 902 }
 903
 904 /*
 905  * This is the original routine that did the packet transfer.
 906  * It fails at high speeds on the Iomega ZIP drive, so there's a slower version
 907  * for that drive below. The algorithm is chosen based on drive type
 908  */
 909 static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive)
 910 {
 911         ide_startstop_t startstop;
 912         idefloppy_floppy_t *floppy = drive->driver_data;
 913         atapi_ireason_t ireason;
 914
 915         if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
 916                 printk(KERN_ERR "ide-floppy: Strange, packet command "
 917                                 "initiated yet DRQ isn't asserted\n");
 918                 return startstop;
 919         }
 920         ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
 921         if (!ireason.b.cod || ireason.b.io) {
 922                 printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while "
 923                                 "issuing a packet command\n");
 924                 return ide_do_reset(drive);
 925         }
 926         if (HWGROUP(drive)->handler != NULL)
 927                 BUG();
 928         /* Set the interrupt routine */
 929         ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
 930         /* Send the actual packet */
 931         HWIF(drive)->atapi_output_bytes(drive, floppy->pc->c, 12);
 932         return ide_started;
 933 }
 934
 935
 936 /*
 937  * What we have here is a classic case of a top half / bottom half
 938  * interrupt service routine. In interrupt mode, the device sends
 939  * an interrupt to signal it's ready to receive a packet. However,
 940  * we need to delay about 2-3 ticks before issuing the packet or we
 941  * gets in trouble.
 942  *
 943  * So, follow carefully. transfer_pc1 is called as an interrupt (or
 944  * directly). In either case, when the device says it's ready for a
 945  * packet, we schedule the packet transfer to occur about 2-3 ticks
 946  * later in transfer_pc2.
 947  */
 948 static int idefloppy_transfer_pc2 (ide_drive_t *drive)
 949 {
 950         idefloppy_floppy_t *floppy = drive->driver_data;
 951
 952         /* Send the actual packet */
 953         HWIF(drive)->atapi_output_bytes(drive, floppy->pc->c, 12);
 954         /* Timeout for the packet command */
 955         return IDEFLOPPY_WAIT_CMD;
 956 }
 957
 958 static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive)
 959 {
 960         idefloppy_floppy_t *floppy = drive->driver_data;
 961         ide_startstop_t startstop;
 962         atapi_ireason_t ireason;
 963
 964         if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
 965                 printk(KERN_ERR "ide-floppy: Strange, packet command "
 966                                 "initiated yet DRQ isn't asserted\n");
 967                 return startstop;
 968         }
 969         ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
 970         if (!ireason.b.cod || ireason.b.io) {
 971                 printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) "
 972                                 "while issuing a packet command\n");
 973                 return ide_do_reset(drive);
 974         }
 975         /*
 976          * The following delay solves a problem with ATAPI Zip 100 drives
 977          * where the Busy flag was apparently being deasserted before the
 978          * unit was ready to receive data. This was happening on a
 979          * 1200 MHz Athlon system. 10/26/01 25msec is too short,
 980          * 40 and 50msec work well. idefloppy_pc_intr will not be actually
 981          * used until after the packet is moved in about 50 msec.
 982          */
 983         if (HWGROUP(drive)->handler != NULL)
 984                 BUG();
 985         ide_set_handler(drive,
 986           &idefloppy_pc_intr,           /* service routine for packet command */
 987           floppy->ticks,                /* wait this long before "failing" */
 988           &idefloppy_transfer_pc2);     /* fail == transfer_pc2 */
 989         return ide_started;
 990 }
 991
 992 /*
 993  *      Issue a packet command
 994  */
 995 static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *pc)
 996 {
 997         idefloppy_floppy_t *floppy = drive->driver_data;
 998         atapi_feature_t feature;
 999         atapi_bcount_t bcount;
1000         ide_handler_t *pkt_xfer_routine;
1001
1002 #if IDEFLOPPY_DEBUG_BUGS
1003         if (floppy->pc->c[0] == IDEFLOPPY_REQUEST_SENSE_CMD &&
1004             pc->c[0] == IDEFLOPPY_REQUEST_SENSE_CMD) {
1005                 printk(KERN_ERR "ide-floppy: possible ide-floppy.c bug - "
1006                         "Two request sense in serial were issued\n");
1007         }
1008 #endif /* IDEFLOPPY_DEBUG_BUGS */
1009
1010         if (floppy->failed_pc == NULL &&
1011             pc->c[0] != IDEFLOPPY_REQUEST_SENSE_CMD)
1012                 floppy->failed_pc = pc;
1013         /* Set the current packet command */
1014         floppy->pc = pc;
1015
1016         if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES ||
1017             test_bit(PC_ABORT, &pc->flags)) {
1018                 /*
1019                  *      We will "abort" retrying a packet command in case
1020                  *      a legitimate error code was received.
1021                  */
1022                 if (!test_bit(PC_ABORT, &pc->flags)) {
1023                         if (!test_bit(PC_SUPPRESS_ERROR, &pc->flags)) {
1024                                 printk(KERN_ERR "ide-floppy: %s: I/O error, "
1025                                                 "pc = %2x, key = %2x, "
1026                                                 "asc = %2x, ascq = %2x\n",
1027                                                 drive->name, pc->c[0],
1028                                                 floppy->sense_key,
1029                                                 floppy->asc, floppy->ascq);
1030                         }
1031                         /* Giving up */
1032                         pc->error = IDEFLOPPY_ERROR_GENERAL;
1033                 }
1034                 floppy->failed_pc = NULL;
1035                 pc->callback(drive);
1036                 return ide_stopped;
1037         }
1038
1039         debug_log(KERN_INFO "Retry number - %d\n",pc->retries);
1040
1041         pc->retries++;
1042         /* We haven't transferred any data yet */
1043         pc->actually_transferred = 0;
1044         pc->current_position = pc->buffer;
1045         bcount.all = min(pc->request_transfer, 63 * 1024);
1046
1047         if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) {
1048                 (void)__ide_dma_off(drive);
1049         }
1050         feature.all = 0;
1051
1052         if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma) {
1053                 if (test_bit(PC_WRITING, &pc->flags)) {
1054                         feature.b.dma = !HWIF(drive)->ide_dma_write(drive);
1055                 } else {
1056                         feature.b.dma = !HWIF(drive)->ide_dma_read(drive);
1057                 }
1058         }
1059
1060         if (IDE_CONTROL_REG)
1061                 HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG);
1062         /* Use PIO/DMA */
1063         HWIF(drive)->OUTB(feature.all, IDE_FEATURE_REG);
1064         HWIF(drive)->OUTB(bcount.b.high, IDE_BCOUNTH_REG);
1065         HWIF(drive)->OUTB(bcount.b.low, IDE_BCOUNTL_REG);
1066         HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG);
1067
1068         if (feature.b.dma) {    /* Begin DMA, if necessary */
1069                 set_bit(PC_DMA_IN_PROGRESS, &pc->flags);
1070                 (void) (HWIF(drive)->ide_dma_begin(drive));
1071         }
1072
1073         /* Can we transfer the packet when we get the interrupt or wait? */
1074         if (test_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags)) {
1075                 /* wait */
1076                 pkt_xfer_routine = &idefloppy_transfer_pc1;
1077         } else {
1078                 /* immediate */
1079                 pkt_xfer_routine = &idefloppy_transfer_pc;
1080         }
1081
1082         if (test_bit (IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags)) {
1083                 /* Issue the packet command */
1084                 ide_execute_command(drive, WIN_PACKETCMD,
1085                                 pkt_xfer_routine,
1086                                 IDEFLOPPY_WAIT_CMD,
1087                                 NULL);
1088                 return ide_started;
1089         } else {
1090                 /* Issue the packet command */
1091                 HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG);
1092                 return (*pkt_xfer_routine) (drive);
1093         }
1094 }
1095
1096 static void idefloppy_rw_callback (ide_drive_t *drive)
1097 {
1098         debug_log(KERN_INFO "ide-floppy: Reached idefloppy_rw_callback\n");
1099
1100         idefloppy_do_end_request(drive, 1, 0);
1101         return;
1102 }
1103
1104 static void idefloppy_create_prevent_cmd (idefloppy_pc_t *pc, int prevent)
1105 {
1106         debug_log(KERN_INFO "ide-floppy: creating prevent removal command, "
1107                 "prevent = %d\n", prevent);
1108
1109         idefloppy_init_pc(pc);
1110         pc->c[0] = IDEFLOPPY_PREVENT_REMOVAL_CMD;
1111         pc->c[4] = prevent;
1112 }
1113
1114 static void idefloppy_create_read_capacity_cmd (idefloppy_pc_t *pc)
1115 {
1116         idefloppy_init_pc(pc);
1117         pc->c[0] = IDEFLOPPY_READ_CAPACITY_CMD;
1118         pc->c[7] = 255;
1119         pc->c[8] = 255;
1120         pc->request_transfer = 255;
1121 }
1122
1123 static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l,
1124                                               int flags)
1125 {
1126         idefloppy_init_pc(pc);
1127         pc->c[0] = IDEFLOPPY_FORMAT_UNIT_CMD;
1128         pc->c[1] = 0x17;
1129
1130         memset(pc->buffer, 0, 12);
1131         pc->buffer[1] = 0xA2;
1132         /* Default format list header, u8 1: FOV/DCRT/IMM bits set */
1133
1134         if (flags & 1)                          /* Verify bit on... */
1135                 pc->buffer[1] ^= 0x20;          /* ... turn off DCRT bit */
1136         pc->buffer[3] = 8;
1137
1138         put_unaligned(htonl(b), (unsigned int *)(&pc->buffer[4]));
1139         put_unaligned(htonl(l), (unsigned int *)(&pc->buffer[8]));
1140         pc->buffer_size=12;
1141         set_bit(PC_WRITING, &pc->flags);
1142 }
1143
1144 /*
1145  *      A mode sense command is used to "sense" floppy parameters.
1146  */
1147 static void idefloppy_create_mode_sense_cmd (idefloppy_pc_t *pc, u8 page_code, u8 type)
1148 {
1149         u16 length = sizeof(idefloppy_mode_parameter_header_t);
1150
1151         idefloppy_init_pc(pc);
1152         pc->c[0] = IDEFLOPPY_MODE_SENSE_CMD;
1153         pc->c[1] = 0;
1154         pc->c[2] = page_code + (type << 6);
1155
1156         switch (page_code) {
1157                 case IDEFLOPPY_CAPABILITIES_PAGE:
1158                         length += 12;
1159                         break;
1160                 case IDEFLOPPY_FLEXIBLE_DISK_PAGE:
1161                         length += 32;
1162                         break;
1163                 default:
1164                         printk(KERN_ERR "ide-floppy: unsupported page code "
1165                                 "in create_mode_sense_cmd\n");
1166         }
1167         put_unaligned(htons(length), (u16 *) &pc->c[7]);
1168         pc->request_transfer = length;
1169 }
1170
1171 static void idefloppy_create_start_stop_cmd (idefloppy_pc_t *pc, int start)
1172 {
1173         idefloppy_init_pc(pc);
1174         pc->c[0] = IDEFLOPPY_START_STOP_CMD;
1175         pc->c[4] = start;
1176 }
1177
1178 static void idefloppy_create_test_unit_ready_cmd(idefloppy_pc_t *pc)
1179 {
1180         idefloppy_init_pc(pc);
1181         pc->c[0] = IDEFLOPPY_TEST_UNIT_READY_CMD;
1182 }
1183
1184 static void idefloppy_create_rw_cmd (idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq, unsigned long sector)
1185 {
1186         int block = sector / floppy->bs_factor;
1187         int blocks = rq->nr_sectors / floppy->bs_factor;
1188         int cmd = rq_data_dir(rq);
1189
1190         debug_log("create_rw1%d_cmd: block == %d, blocks == %d\n",
1191                 2 * test_bit (IDEFLOPPY_USE_READ12, &floppy->flags),
1192                 block, blocks);
1193
1194         idefloppy_init_pc(pc);
1195         if (test_bit(IDEFLOPPY_USE_READ12, &floppy->flags)) {
1196                 pc->c[0] = cmd == READ ? IDEFLOPPY_READ12_CMD : IDEFLOPPY_WRITE12_CMD;
1197                 put_unaligned(htonl(blocks), (unsigned int *) &pc->c[6]);
1198         } else {
1199                 pc->c[0] = cmd == READ ? IDEFLOPPY_READ10_CMD : IDEFLOPPY_WRITE10_CMD;
1200                 put_unaligned(htons(blocks), (unsigned short *) &pc->c[7]);
1201         }
1202         put_unaligned(htonl(block), (unsigned int *) &pc->c[2]);
1203         pc->callback = &idefloppy_rw_callback;
1204         pc->rq = rq;
1205         pc->b_count = cmd == READ ? 0 : rq->bio->bi_size;
1206         if (rq->flags & REQ_RW)
1207                 set_bit(PC_WRITING, &pc->flags);
1208         pc->buffer = NULL;
1209         pc->request_transfer = pc->buffer_size = blocks * floppy->block_size;
1210         set_bit(PC_DMA_RECOMMENDED, &pc->flags);
1211 }
1212
1213 static int
1214 idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq)
1215 {
1216         /*
1217          * just support eject for now, it would not be hard to make the
1218          * REQ_BLOCK_PC support fully-featured
1219          */
1220         if (rq->cmd[0] != IDEFLOPPY_START_STOP_CMD)
1221                 return 1;
1222
1223         idefloppy_init_pc(pc);
1224         memcpy(pc->c, rq->cmd, sizeof(pc->c));
1225         return 0;
1226 }
1227
1228 /*
1229  *      idefloppy_do_request is our request handling function.
1230  */
1231 static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request *rq, sector_t block_s)
1232 {
1233         idefloppy_floppy_t *floppy = drive->driver_data;
1234         idefloppy_pc_t *pc;
1235         unsigned long block = (unsigned long)block_s;
1236
1237         debug_log(KERN_INFO "rq_status: %d, dev: %s, flags: %lx, errors: %d\n",
1238                         rq->rq_status, rq->rq_disk->disk_name,
1239                         rq->flags, rq->errors);
1240         debug_log(KERN_INFO "sector: %ld, nr_sectors: %ld, "
1241                         "current_nr_sectors: %d\n", (long)rq->sector,
1242                         rq->nr_sectors, rq->current_nr_sectors);
1243
1244         if (rq->errors >= ERROR_MAX) {
1245                 if (floppy->failed_pc != NULL)
1246                         printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x,"
1247                                         " key = %2x, asc = %2x, ascq = %2x\n",
1248                                 drive->name, floppy->failed_pc->c[0],
1249                                 floppy->sense_key, floppy->asc, floppy->ascq);
1250                 else
1251                         printk(KERN_ERR "ide-floppy: %s: I/O error\n",
1252                                 drive->name);
1253                 idefloppy_do_end_request(drive, 0, 0);
1254                 return ide_stopped;
1255         }
1256         if (rq->flags & REQ_CMD) {
1257                 if (((long)rq->sector % floppy->bs_factor) ||
1258                     (rq->nr_sectors % floppy->bs_factor)) {
1259                         printk("%s: unsupported r/w request size\n",
1260                                 drive->name);
1261                         idefloppy_do_end_request(drive, 0, 0);
1262                         return ide_stopped;
1263                 }
1264                 pc = idefloppy_next_pc_storage(drive);
1265                 idefloppy_create_rw_cmd(floppy, pc, rq, block);
1266         } else if (rq->flags & REQ_SPECIAL) {
1267                 pc = (idefloppy_pc_t *) rq->buffer;
1268         } else if (rq->flags & REQ_BLOCK_PC) {
1269                 pc = idefloppy_next_pc_storage(drive);
1270                 if (idefloppy_blockpc_cmd(floppy, pc, rq)) {
1271                         idefloppy_do_end_request(drive, 0, 0);
1272                         return ide_stopped;
1273                 }
1274         } else {
1275                 blk_dump_rq_flags(rq,
1276                         "ide-floppy: unsupported command in queue");
1277                 idefloppy_do_end_request(drive, 0, 0);
1278                 return ide_stopped;
1279         }
1280
1281         pc->rq = rq;
1282         return idefloppy_issue_pc(drive, pc);
1283 }
1284
1285 /*
1286  *      idefloppy_queue_pc_tail adds a special packet command request to the
1287  *      tail of the request queue, and waits for it to be serviced.
1288  */
1289 static int idefloppy_queue_pc_tail (ide_drive_t *drive,idefloppy_pc_t *pc)
1290 {
1291         struct request rq;
1292
1293         ide_init_drive_cmd (&rq);
1294         rq.buffer = (char *) pc;
1295         rq.flags = REQ_SPECIAL;         //      rq.cmd = IDEFLOPPY_PC_RQ;
1296
1297         return ide_do_drive_cmd(drive, &rq, ide_wait);
1298 }
1299
1300 /*
1301  *      Look at the flexible disk page parameters. We will ignore the CHS
1302  *      capacity parameters and use the LBA parameters instead.
1303  */
1304 static int idefloppy_get_flexible_disk_page (ide_drive_t *drive)
1305 {
1306         idefloppy_floppy_t *floppy = drive->driver_data;
1307         idefloppy_pc_t pc;
1308         idefloppy_mode_parameter_header_t *header;
1309         idefloppy_flexible_disk_page_t *page;
1310         int capacity, lba_capacity;
1311
1312         idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE, MODE_SENSE_CURRENT);
1313         if (idefloppy_queue_pc_tail(drive,&pc)) {
1314                 printk(KERN_ERR "ide-floppy: Can't get flexible disk "
1315                         "page parameters\n");
1316                 return 1;
1317         }
1318         header = (idefloppy_mode_parameter_header_t *) pc.buffer;
1319         floppy->wp = header->wp;
1320         set_disk_ro(drive->disk, floppy->wp);
1321         page = (idefloppy_flexible_disk_page_t *) (header + 1);
1322
1323         page->transfer_rate = ntohs(page->transfer_rate);
1324         page->sector_size = ntohs(page->sector_size);
1325         page->cyls = ntohs(page->cyls);
1326         page->rpm = ntohs(page->rpm);
1327         capacity = page->cyls * page->heads * page->sectors * page->sector_size;
1328         if (memcmp (page, &floppy->flexible_disk_page, sizeof (idefloppy_flexible_disk_page_t)))
1329                 printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, "
1330                                 "%d sector size, %d rpm\n",
1331                         drive->name, capacity / 1024, page->cyls,
1332                         page->heads, page->sectors,
1333                         page->transfer_rate / 8, page->sector_size, page->rpm);
1334
1335         floppy->flexible_disk_page = *page;
1336         drive->bios_cyl = page->cyls;
1337         drive->bios_head = page->heads;
1338         drive->bios_sect = page->sectors;
1339         lba_capacity = floppy->blocks * floppy->block_size;
1340         if (capacity < lba_capacity) {
1341                 printk(KERN_NOTICE "%s: The disk reports a capacity of %d "
1342                         "bytes, but the drive only handles %d\n",
1343                         drive->name, lba_capacity, capacity);
1344                 floppy->blocks = floppy->block_size ? capacity / floppy->block_size : 0;
1345         }
1346         return 0;
1347 }
1348
1349 static int idefloppy_get_capability_page(ide_drive_t *drive)
1350 {
1351         idefloppy_floppy_t *floppy = drive->driver_data;
1352         idefloppy_pc_t pc;
1353         idefloppy_mode_parameter_header_t *header;
1354         idefloppy_capabilities_page_t *page;
1355
1356         floppy->srfp = 0;
1357         idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE,
1358                                                  MODE_SENSE_CURRENT);
1359
1360         set_bit(PC_SUPPRESS_ERROR, &pc.flags);
1361         if (idefloppy_queue_pc_tail(drive,&pc)) {
1362                 return 1;
1363         }
1364
1365         header = (idefloppy_mode_parameter_header_t *) pc.buffer;
1366         page= (idefloppy_capabilities_page_t *)(header+1);
1367         floppy->srfp = page->srfp;
1368         return (0);
1369 }
1370
1371 /*
1372  *      Determine if a media is present in the floppy drive, and if so,
1373  *      its LBA capacity.
1374  */
1375 static int idefloppy_get_capacity (ide_drive_t *drive)
1376 {
1377         idefloppy_floppy_t *floppy = drive->driver_data;
1378         idefloppy_pc_t pc;
1379         idefloppy_capacity_header_t *header;
1380         idefloppy_capacity_descriptor_t *descriptor;
1381         int i, descriptors, rc = 1, blocks, length;
1382
1383         drive->bios_cyl = 0;
1384         drive->bios_head = drive->bios_sect = 0;
1385         floppy->blocks = floppy->bs_factor = 0;
1386         set_capacity(drive->disk, 0);
1387
1388         idefloppy_create_read_capacity_cmd(&pc);
1389         if (idefloppy_queue_pc_tail(drive, &pc)) {
1390                 printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
1391                 return 1;
1392         }
1393         header = (idefloppy_capacity_header_t *) pc.buffer;
1394         descriptors = header->length / sizeof(idefloppy_capacity_descriptor_t);
1395         descriptor = (idefloppy_capacity_descriptor_t *) (header + 1);
1396
1397         for (i = 0; i < descriptors; i++, descriptor++) {
1398                 blocks = descriptor->blocks = ntohl(descriptor->blocks);
1399                 length = descriptor->length = ntohs(descriptor->length);
1400
1401                 if (!i)
1402                 {
1403                 switch (descriptor->dc) {
1404                 /* Clik! drive returns this instead of CAPACITY_CURRENT */
1405                 case CAPACITY_UNFORMATTED:
1406                         if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags))
1407                                 /*
1408                                  * If it is not a clik drive, break out
1409                                  * (maintains previous driver behaviour)
1410                                  */
1411                                 break;
1412                 case CAPACITY_CURRENT:
1413                         /* Normal Zip/LS-120 disks */
1414                         if (memcmp(descriptor, &floppy->capacity, sizeof (idefloppy_capacity_descriptor_t)))
1415                                 printk(KERN_INFO "%s: %dkB, %d blocks, %d "
1416                                         "sector size\n", drive->name,
1417                                         blocks * length / 1024, blocks, length);
1418                         floppy->capacity = *descriptor;
1419                         if (!length || length % 512) {
1420                                 printk(KERN_NOTICE "%s: %d bytes block size "
1421                                         "not supported\n", drive->name, length);
1422                         } else {
1423                                 floppy->blocks = blocks;
1424                                 floppy->block_size = length;
1425                                 if ((floppy->bs_factor = length / 512) != 1)
1426                                         printk(KERN_NOTICE "%s: warning: non "
1427                                                 "512 bytes block size not "
1428                                                 "fully supported\n",
1429                                                 drive->name);
1430                                 rc = 0;
1431                         }
1432                         break;
1433                 case CAPACITY_NO_CARTRIDGE:
1434                         /*
1435                          * This is a KERN_ERR so it appears on screen
1436                          * for the user to see
1437                          */
1438                         printk(KERN_ERR "%s: No disk in drive\n", drive->name);
1439                         break;
1440                 case CAPACITY_INVALID:
1441                         printk(KERN_ERR "%s: Invalid capacity for disk "
1442                                 "in drive\n", drive->name);
1443                         break;
1444                 }
1445                 }
1446                 if (!i) {
1447                         debug_log( "Descriptor 0 Code: %d\n",
1448                                 descriptor->dc);
1449                 }
1450                 debug_log( "Descriptor %d: %dkB, %d blocks, %d "
1451                         "sector size\n", i, blocks * length / 1024, blocks,
1452                         length);
1453         }
1454
1455         /* Clik! disk does not support get_flexible_disk_page */
1456         if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
1457                 (void) idefloppy_get_flexible_disk_page(drive);
1458         }
1459
1460         set_capacity(drive->disk, floppy->blocks * floppy->bs_factor);
1461         return rc;
1462 }
1463
1464 /*
1465 ** Obtain the list of formattable capacities.
1466 ** Very similar to idefloppy_get_capacity, except that we push the capacity
1467 ** descriptors to userland, instead of our own structures.
1468 **
1469 ** Userland gives us the following structure:
1470 **
1471 ** struct idefloppy_format_capacities {
1472 **        int nformats;
1473 **        struct {
1474 **                int nblocks;
1475 **                int blocksize;
1476 **                } formats[];
1477 **        } ;
1478 **
1479 ** userland initializes nformats to the number of allocated formats[]
1480 ** records.  On exit we set nformats to the number of records we've
1481 ** actually initialized.
1482 **
1483 */
1484
1485 static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
1486 {
1487         idefloppy_pc_t pc;
1488         idefloppy_capacity_header_t *header;
1489         idefloppy_capacity_descriptor_t *descriptor;
1490         int i, descriptors, blocks, length;
1491         int u_array_size;
1492         int u_index;
1493         int __user *argp;
1494
1495         if (get_user(u_array_size, arg))
1496                 return (-EFAULT);
1497
1498         if (u_array_size <= 0)
1499                 return (-EINVAL);
1500
1501         idefloppy_create_read_capacity_cmd(&pc);
1502         if (idefloppy_queue_pc_tail(drive, &pc)) {
1503                 printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
1504                 return (-EIO);
1505         }
1506         header = (idefloppy_capacity_header_t *) pc.buffer;
1507         descriptors = header->length /
1508                 sizeof(idefloppy_capacity_descriptor_t);
1509         descriptor = (idefloppy_capacity_descriptor_t *) (header + 1);
1510
1511         u_index = 0;
1512         argp = arg + 1;
1513
1514         /*
1515         ** We always skip the first capacity descriptor.  That's the
1516         ** current capacity.  We are interested in the remaining descriptors,
1517         ** the formattable capacities.
1518         */
1519
1520         for (i=0; i<descriptors; i++, descriptor++) {
1521                 if (u_index >= u_array_size)
1522                         break;  /* User-supplied buffer too small */
1523                 if (i == 0)
1524                         continue;       /* Skip the first descriptor */
1525
1526                 blocks = ntohl(descriptor->blocks);
1527                 length = ntohs(descriptor->length);
1528
1529                 if (put_user(blocks, argp))
1530                         return(-EFAULT);
1531                 ++argp;
1532
1533                 if (put_user(length, argp))
1534                         return (-EFAULT);
1535                 ++argp;
1536
1537                 ++u_index;
1538         }
1539
1540         if (put_user(u_index, arg))
1541                 return (-EFAULT);
1542         return (0);
1543 }
1544
1545 /*
1546 ** Send ATAPI_FORMAT_UNIT to the drive.
1547 **
1548 ** Userland gives us the following structure:
1549 **
1550 ** struct idefloppy_format_command {
1551 **        int nblocks;
1552 **        int blocksize;
1553 **        int flags;
1554 **        } ;
1555 **
1556 ** flags is a bitmask, currently, the only defined flag is:
1557 **
1558 **        0x01 - verify media after format.
1559 */
1560
1561 static int idefloppy_begin_format(ide_drive_t *drive, int __user *arg)
1562 {
1563         int blocks;
1564         int length;
1565         int flags;
1566         idefloppy_pc_t pc;
1567
1568         if (get_user(blocks, arg) ||
1569             get_user(length, arg+1) ||
1570             get_user(flags, arg+2)) {
1571                 return (-EFAULT);
1572         }
1573
1574         /* Get the SFRP bit */
1575         (void) idefloppy_get_capability_page(drive);
1576         idefloppy_create_format_unit_cmd(&pc, blocks, length, flags);
1577         if (idefloppy_queue_pc_tail(drive, &pc)) {
1578                 return (-EIO);
1579         }
1580
1581         return (0);
1582 }
1583
1584 /*
1585 ** Get ATAPI_FORMAT_UNIT progress indication.
1586 **
1587 ** Userland gives a pointer to an int.  The int is set to a progresss
1588 ** indicator 0-65536, with 65536=100%.
1589 **
1590 ** If the drive does not support format progress indication, we just check
1591 ** the dsc bit, and return either 0 or 65536.
1592 */
1593
1594 static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
1595 {
1596         idefloppy_floppy_t *floppy = drive->driver_data;
1597         idefloppy_pc_t pc;
1598         int progress_indication = 0x10000;
1599
1600         if (floppy->srfp) {
1601                 idefloppy_create_request_sense_cmd(&pc);
1602                 if (idefloppy_queue_pc_tail(drive, &pc)) {
1603                         return (-EIO);
1604                 }
1605
1606                 if (floppy->sense_key == 2 &&
1607                     floppy->asc == 4 &&
1608                     floppy->ascq == 4) {
1609                         progress_indication = floppy->progress_indication;
1610                 }
1611                 /* Else assume format_unit has finished, and we're
1612                 ** at 0x10000 */
1613         } else {
1614                 atapi_status_t status;
1615                 unsigned long flags;
1616
1617                 local_irq_save(flags);
1618                 status.all = HWIF(drive)->INB(IDE_STATUS_REG);
1619                 local_irq_restore(flags);
1620
1621                 progress_indication = !status.b.dsc ? 0 : 0x10000;
1622         }
1623         if (put_user(progress_indication, arg))
1624                 return (-EFAULT);
1625
1626         return (0);
1627 }
1628
1629 /*
1630  *      Return the current floppy capacity to ide.c.
1631  */
1632 static sector_t idefloppy_capacity (ide_drive_t *drive)
1633 {
1634         idefloppy_floppy_t *floppy = drive->driver_data;
1635         unsigned long capacity = floppy->blocks * floppy->bs_factor;
1636
1637         return capacity;
1638 }
1639
1640 /*
1641  *      idefloppy_identify_device checks if we can support a drive,
1642  *      based on the ATAPI IDENTIFY command results.
1643  */
1644 static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
1645 {
1646         struct idefloppy_id_gcw gcw;
1647 #if IDEFLOPPY_DEBUG_INFO
1648         u16 mask,i;
1649         char buffer[80];
1650 #endif /* IDEFLOPPY_DEBUG_INFO */
1651
1652         *((u16 *) &gcw) = id->config;
1653
1654 #ifdef CONFIG_PPC
1655         /* kludge for Apple PowerBook internal zip */
1656         if ((gcw.device_type == 5) &&
1657             !strstr(id->model, "CD-ROM") &&
1658             strstr(id->model, "ZIP"))
1659                 gcw.device_type = 0;
1660 #endif
1661
1662 #if IDEFLOPPY_DEBUG_INFO
1663         printk(KERN_INFO "Dumping ATAPI Identify Device floppy parameters\n");
1664         switch (gcw.protocol) {
1665                 case 0: case 1: sprintf(buffer, "ATA");break;
1666                 case 2: sprintf(buffer, "ATAPI");break;
1667                 case 3: sprintf(buffer, "Reserved (Unknown to ide-floppy)");break;
1668         }
1669         printk(KERN_INFO "Protocol Type: %s\n", buffer);
1670         switch (gcw.device_type) {
1671                 case 0: sprintf(buffer, "Direct-access Device");break;
1672                 case 1: sprintf(buffer, "Streaming Tape Device");break;
1673                 case 2: case 3: case 4: sprintf (buffer, "Reserved");break;
1674                 case 5: sprintf(buffer, "CD-ROM Device");break;
1675                 case 6: sprintf(buffer, "Reserved");
1676                 case 7: sprintf(buffer, "Optical memory Device");break;
1677                 case 0x1f: sprintf(buffer, "Unknown or no Device type");break;
1678                 default: sprintf(buffer, "Reserved");
1679         }
1680         printk(KERN_INFO "Device Type: %x - %s\n", gcw.device_type, buffer);
1681         printk(KERN_INFO "Removable: %s\n",gcw.removable ? "Yes":"No");
1682         switch (gcw.drq_type) {
1683                 case 0: sprintf(buffer, "Microprocessor DRQ");break;
1684                 case 1: sprintf(buffer, "Interrupt DRQ");break;
1685                 case 2: sprintf(buffer, "Accelerated DRQ");break;
1686                 case 3: sprintf(buffer, "Reserved");break;
1687         }
1688         printk(KERN_INFO "Command Packet DRQ Type: %s\n", buffer);
1689         switch (gcw.packet_size) {
1690                 case 0: sprintf(buffer, "12 bytes");break;
1691                 case 1: sprintf(buffer, "16 bytes");break;
1692                 default: sprintf(buffer, "Reserved");break;
1693         }
1694         printk(KERN_INFO "Command Packet Size: %s\n", buffer);
1695         printk(KERN_INFO "Model: %.40s\n",id->model);
1696         printk(KERN_INFO "Firmware Revision: %.8s\n",id->fw_rev);
1697         printk(KERN_INFO "Serial Number: %.20s\n",id->serial_no);
1698         printk(KERN_INFO "Write buffer size(?): %d bytes\n",id->buf_size*512);
1699         printk(KERN_INFO "DMA: %s",id->capability & 0x01 ? "Yes\n":"No\n");
1700         printk(KERN_INFO "LBA: %s",id->capability & 0x02 ? "Yes\n":"No\n");
1701         printk(KERN_INFO "IORDY can be disabled: %s",id->capability & 0x04 ? "Yes\n":"No\n");
1702         printk(KERN_INFO "IORDY supported: %s",id->capability & 0x08 ? "Yes\n":"Unknown\n");
1703         printk(KERN_INFO "ATAPI overlap supported: %s",id->capability & 0x20 ? "Yes\n":"No\n");
1704         printk(KERN_INFO "PIO Cycle Timing Category: %d\n",id->tPIO);
1705         printk(KERN_INFO "DMA Cycle Timing Category: %d\n",id->tDMA);
1706         printk(KERN_INFO "Single Word DMA supported modes:\n");
1707         for (i=0,mask=1;i<8;i++,mask=mask << 1) {
1708                 if (id->dma_1word & mask)
1709                         printk(KERN_INFO "   Mode %d%s\n", i,
1710                         (id->dma_1word & (mask << 8)) ? " (active)" : "");
1711         }
1712         printk(KERN_INFO "Multi Word DMA supported modes:\n");
1713         for (i=0,mask=1;i<8;i++,mask=mask << 1) {
1714                 if (id->dma_mword & mask)
1715                         printk(KERN_INFO "   Mode %d%s\n", i,
1716                         (id->dma_mword & (mask << 8)) ? " (active)" : "");
1717         }
1718         if (id->field_valid & 0x0002) {
1719                 printk(KERN_INFO "Enhanced PIO Modes: %s\n",
1720                         id->eide_pio_modes & 1 ? "Mode 3":"None");
1721                 if (id->eide_dma_min == 0)
1722                         sprintf(buffer, "Not supported");
1723                 else
1724                         sprintf(buffer, "%d ns",id->eide_dma_min);
1725                 printk(KERN_INFO "Minimum Multi-word DMA cycle per word: %s\n", buffer);
1726                 if (id->eide_dma_time == 0)
1727                         sprintf(buffer, "Not supported");
1728                 else
1729                         sprintf(buffer, "%d ns",id->eide_dma_time);
1730                 printk(KERN_INFO "Manufacturer\'s Recommended Multi-word cycle: %s\n", buffer);
1731                 if (id->eide_pio == 0)
1732                         sprintf(buffer, "Not supported");
1733                 else
1734                         sprintf(buffer, "%d ns",id->eide_pio);
1735                 printk(KERN_INFO "Minimum PIO cycle without IORDY: %s\n",
1736                         buffer);
1737                 if (id->eide_pio_iordy == 0)
1738                         sprintf(buffer, "Not supported");
1739                 else
1740                         sprintf(buffer, "%d ns",id->eide_pio_iordy);
1741                 printk(KERN_INFO "Minimum PIO cycle with IORDY: %s\n", buffer);
1742         } else
1743                 printk(KERN_INFO "According to the device, fields 64-70 are not valid.\n");
1744 #endif /* IDEFLOPPY_DEBUG_INFO */
1745
1746         if (gcw.protocol != 2)
1747                 printk(KERN_ERR "ide-floppy: Protocol is not ATAPI\n");
1748         else if (gcw.device_type != 0)
1749                 printk(KERN_ERR "ide-floppy: Device type is not set to floppy\n");
1750         else if (!gcw.removable)
1751                 printk(KERN_ERR "ide-floppy: The removable flag is not set\n");
1752         else if (gcw.drq_type == 3) {
1753                 printk(KERN_ERR "ide-floppy: Sorry, DRQ type %d not supported\n", gcw.drq_type);
1754         } else if (gcw.packet_size != 0) {
1755                 printk(KERN_ERR "ide-floppy: Packet size is not 12 bytes long\n");
1756         } else
1757                 return 1;
1758         return 0;
1759 }
1760
1761 static void idefloppy_add_settings(ide_drive_t *drive)
1762 {
1763         idefloppy_floppy_t *floppy = drive->driver_data;
1764
1765 /*
1766  *                      drive   setting name    read/write      ioctl   ioctl           data type       min     max     mul_factor      div_factor      data pointer            set function
1767  */
1768         ide_add_setting(drive,  "bios_cyl",             SETTING_RW,                                     -1,                     -1,                     TYPE_INT,       0,      1023,                           1,      1,      &drive->bios_cyl,               NULL);
1769         ide_add_setting(drive,  "bios_head",            SETTING_RW,                                     -1,                     -1,                     TYPE_BYTE,      0,      255,                            1,      1,      &drive->bios_head,              NULL);
1770         ide_add_setting(drive,  "bios_sect",            SETTING_RW,                                     -1,                     -1,                     TYPE_BYTE,      0,      63,                             1,      1,      &drive->bios_sect,              NULL);
1771         ide_add_setting(drive,  "ticks",                SETTING_RW,                                     -1,                     -1,                     TYPE_BYTE,      0,      255,                            1,      1,      &floppy->ticks,         NULL);
1772 }
1773
1774 /*
1775  *      Driver initialization.
1776  */
1777 static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy)
1778 {
1779         struct idefloppy_id_gcw gcw;
1780
1781         *((u16 *) &gcw) = drive->id->config;
1782         drive->driver_data = floppy;
1783         drive->ready_stat = 0;
1784         memset(floppy, 0, sizeof(idefloppy_floppy_t));
1785         floppy->drive = drive;
1786         floppy->pc = floppy->pc_stack;
1787         if (gcw.drq_type == 1)
1788                 set_bit(IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags);
1789         /*
1790          *      We used to check revisions here. At this point however
1791          *      I'm giving up. Just assume they are all broken, its easier.
1792          *
1793          *      The actual reason for the workarounds was likely
1794          *      a driver bug after all rather than a firmware bug,
1795          *      and the workaround below used to hide it. It should
1796          *      be fixed as of version 1.9, but to be on the safe side
1797          *      we'll leave the limitation below for the 2.2.x tree.
1798          */
1799
1800         if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) {
1801                 set_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags);
1802                 /* This value will be visible in the /proc/ide/hdx/settings */
1803                 floppy->ticks = IDEFLOPPY_TICKS_DELAY;
1804                 blk_queue_max_sectors(drive->queue, 64);
1805         }
1806
1807         /*
1808         *      Guess what?  The IOMEGA Clik! drive also needs the
1809         *      above fix.  It makes nasty clicking noises without
1810         *      it, so please don't remove this.
1811         */
1812         if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) {
1813                 blk_queue_max_sectors(drive->queue, 64);
1814                 set_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags);
1815         }
1816
1817
1818         (void) idefloppy_get_capacity(drive);
1819         idefloppy_add_settings(drive);
1820 }
1821
1822 static int idefloppy_cleanup (ide_drive_t *drive)
1823 {
1824         idefloppy_floppy_t *floppy = drive->driver_data;
1825         struct gendisk *g = drive->disk;
1826
1827         if (ide_unregister_subdriver(drive))
1828                 return 1;
1829         drive->driver_data = NULL;
1830         kfree(floppy);
1831         del_gendisk(g);
1832         g->fops = ide_fops;
1833         return 0;
1834 }
1835
1836 #ifdef CONFIG_PROC_FS
1837
1838 static ide_proc_entry_t idefloppy_proc[] = {
1839         { "geometry",   S_IFREG|S_IRUGO,        proc_ide_read_geometry, NULL },
1840         { NULL, 0, NULL, NULL }
1841 };
1842
1843 #else
1844
1845 #define idefloppy_proc  NULL
1846
1847 #endif  /* CONFIG_PROC_FS */
1848
1849 static int idefloppy_attach(ide_drive_t *drive);
1850
1851 /*
1852  *      IDE subdriver functions, registered with ide.c
1853  */
1854 static ide_driver_t idefloppy_driver = {
1855         .owner                  = THIS_MODULE,
1856         .name                   = "ide-floppy",
1857         .version                = IDEFLOPPY_VERSION,
1858         .media                  = ide_floppy,
1859         .busy                   = 0,
1860         .supports_dsc_overlap   = 0,
1861         .cleanup                = idefloppy_cleanup,
1862         .do_request             = idefloppy_do_request,
1863         .end_request            = idefloppy_do_end_request,
1864         .capacity               = idefloppy_capacity,
1865         .proc                   = idefloppy_proc,
1866         .attach                 = idefloppy_attach,
1867         .drives                 = LIST_HEAD_INIT(idefloppy_driver.drives),
1868 };
1869
1870 static int idefloppy_open(struct inode *inode, struct file *filp)
1871 {
1872         ide_drive_t *drive = inode->i_bdev->bd_disk->private_data;
1873         idefloppy_floppy_t *floppy = drive->driver_data;
1874         idefloppy_pc_t pc;
1875
1876         drive->usage++;
1877
1878         debug_log(KERN_INFO "Reached idefloppy_open\n");
1879
1880         if (drive->usage == 1) {
1881                 clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
1882                 /* Just in case */
1883
1884                 idefloppy_create_test_unit_ready_cmd(&pc);
1885                 if (idefloppy_queue_pc_tail(drive, &pc)) {
1886                         idefloppy_create_start_stop_cmd(&pc, 1);
1887                         (void) idefloppy_queue_pc_tail(drive, &pc);
1888                 }
1889
1890                 if (idefloppy_get_capacity (drive)
1891                    && (filp->f_flags & O_NDELAY) == 0
1892                     /*
1893                     ** Allow O_NDELAY to open a drive without a disk, or with
1894                     ** an unreadable disk, so that we can get the format
1895                     ** capacity of the drive or begin the format - Sam
1896                     */
1897                     ) {
1898                         drive->usage--;
1899                         return -EIO;
1900                 }
1901
1902                 if (floppy->wp && (filp->f_mode & 2)) {
1903                         drive->usage--;
1904                         return -EROFS;
1905                 }
1906                 set_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags);
1907                 /* IOMEGA Clik! drives do not support lock/unlock commands */
1908                 if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
1909                         idefloppy_create_prevent_cmd(&pc, 1);
1910                         (void) idefloppy_queue_pc_tail(drive, &pc);
1911                 }
1912                 check_disk_change(inode->i_bdev);
1913         } else if (test_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags)) {
1914                 drive->usage--;
1915                 return -EBUSY;
1916         }
1917         return 0;
1918 }
1919
1920 static int idefloppy_release(struct inode *inode, struct file *filp)
1921 {
1922         ide_drive_t *drive = inode->i_bdev->bd_disk->private_data;
1923         idefloppy_pc_t pc;
1924
1925         debug_log(KERN_INFO "Reached idefloppy_release\n");
1926
1927         if (drive->usage == 1) {
1928                 idefloppy_floppy_t *floppy = drive->driver_data;
1929
1930                 /* IOMEGA Clik! drives do not support lock/unlock commands */
1931                 if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
1932                         idefloppy_create_prevent_cmd(&pc, 0);
1933                         (void) idefloppy_queue_pc_tail(drive, &pc);
1934                 }
1935
1936                 clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
1937         }
1938         drive->usage--;
1939         return 0;
1940 }
1941
1942 static int idefloppy_ioctl(struct inode *inode, struct file *file,
1943                         unsigned int cmd, unsigned long arg)
1944 {
1945         struct block_device *bdev = inode->i_bdev;
1946         ide_drive_t *drive = bdev->bd_disk->private_data;
1947         idefloppy_floppy_t *floppy = drive->driver_data;
1948         void __user *argp = (void __user *)arg;
1949         int err = generic_ide_ioctl(bdev, cmd, arg);
1950         int prevent = (arg) ? 1 : 0;
1951         idefloppy_pc_t pc;
1952         if (err != -EINVAL)
1953                 return err;
1954
1955         switch (cmd) {
1956         case CDROMEJECT:
1957                 prevent = 0;
1958                 /* fall through */
1959         case CDROM_LOCKDOOR:
1960                 if (drive->usage > 1)
1961                         return -EBUSY;
1962
1963                 /* The IOMEGA Clik! Drive doesn't support this command - no room for an eject mechanism */
1964                 if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
1965                         idefloppy_create_prevent_cmd(&pc, prevent);
1966                         (void) idefloppy_queue_pc_tail(drive, &pc);
1967                 }
1968                 if (cmd == CDROMEJECT) {
1969                         idefloppy_create_start_stop_cmd(&pc, 2);
1970                         (void) idefloppy_queue_pc_tail(drive, &pc);
1971                 }
1972                 return 0;
1973         case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
1974                 return 0;
1975         case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
1976                 return idefloppy_get_format_capacities(drive, argp);
1977         case IDEFLOPPY_IOCTL_FORMAT_START:
1978
1979                 if (!(file->f_mode & 2))
1980                         return -EPERM;
1981
1982                 if (drive->usage > 1) {
1983                         /* Don't format if someone is using the disk */
1984
1985                         clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS,
1986                                   &floppy->flags);
1987                         return -EBUSY;
1988                 }
1989
1990                 set_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
1991
1992                 err = idefloppy_begin_format(drive, argp);
1993                 if (err)
1994                         clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
1995                 return err;
1996                 /*
1997                 ** Note, the bit will be cleared when the device is
1998                 ** closed.  This is the cleanest way to handle the
1999                 ** situation where the drive does not support
2000                 ** format progress reporting.
2001                 */
2002         case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
2003                 return idefloppy_get_format_progress(drive, argp);
2004         }
2005         return -EINVAL;
2006 }
2007
2008 static int idefloppy_media_changed(struct gendisk *disk)
2009 {
2010         ide_drive_t *drive = disk->private_data;
2011         idefloppy_floppy_t *floppy = drive->driver_data;
2012
2013         /* do not scan partitions twice if this is a removable device */
2014         if (drive->attach) {
2015                 drive->attach = 0;
2016                 return 0;
2017         }
2018         return test_and_clear_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags);
2019 }
2020
2021 static int idefloppy_revalidate_disk(struct gendisk *disk)
2022 {
2023         ide_drive_t *drive = disk->private_data;
2024         set_capacity(disk, current_capacity(drive));
2025         return 0;
2026 }
2027
2028 static struct block_device_operations idefloppy_ops = {
2029         .owner          = THIS_MODULE,
2030         .open           = idefloppy_open,
2031         .release        = idefloppy_release,
2032         .ioctl          = idefloppy_ioctl,
2033         .media_changed  = idefloppy_media_changed,
2034         .revalidate_disk= idefloppy_revalidate_disk
2035 };
2036
2037 static int idefloppy_attach (ide_drive_t *drive)
2038 {
2039         idefloppy_floppy_t *floppy;
2040         struct gendisk *g = drive->disk;
2041         if (!strstr("ide-floppy", drive->driver_req))
2042                 goto failed;
2043         if (!drive->present)
2044                 goto failed;
2045         if (drive->media != ide_floppy)
2046                 goto failed;
2047         if (!idefloppy_identify_device (drive, drive->id)) {
2048                 printk (KERN_ERR "ide-floppy: %s: not supported by this version of ide-floppy\n", drive->name);
2049                 goto failed;
2050         }
2051         if (drive->scsi) {
2052                 printk("ide-floppy: passing drive %s to ide-scsi emulation.\n", drive->name);
2053                 goto failed;
2054         }
2055         if ((floppy = (idefloppy_floppy_t *) kmalloc (sizeof (idefloppy_floppy_t), GFP_KERNEL)) == NULL) {
2056                 printk (KERN_ERR "ide-floppy: %s: Can't allocate a floppy structure\n", drive->name);
2057                 goto failed;
2058         }
2059         if (ide_register_subdriver(drive, &idefloppy_driver)) {
2060                 printk (KERN_ERR "ide-floppy: %s: Failed to register the driver with ide.c\n", drive->name);
2061                 kfree (floppy);
2062                 goto failed;
2063         }
2064         DRIVER(drive)->busy++;
2065         idefloppy_setup (drive, floppy);
2066         DRIVER(drive)->busy--;
2067         g->minors = 1 << PARTN_BITS;
2068         g->driverfs_dev = &drive->gendev;
2069         strcpy(g->devfs_name, drive->devfs_name);
2070         g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0;
2071         g->fops = &idefloppy_ops;
2072         drive->attach = 1;
2073         add_disk(g);
2074         return 0;
2075 failed:
2076         return 1;
2077 }
2078
2079 MODULE_DESCRIPTION("ATAPI FLOPPY Driver");
2080
2081 static void __exit idefloppy_exit (void)
2082 {
2083         ide_unregister_driver(&idefloppy_driver);
2084 }
2085
2086 /*
2087  *      idefloppy_init will register the driver for each floppy.
2088  */
2089 static int idefloppy_init (void)
2090 {
2091         printk("ide-floppy driver " IDEFLOPPY_VERSION "\n");
2092         ide_register_driver(&idefloppy_driver);
2093         return 0;
2094 }
2095
2096 module_init(idefloppy_init);
2097 module_exit(idefloppy_exit);
2098 MODULE_LICENSE("GPL");