patch-2_6_7-vs1_9_1_12
[linux-2.6.git] / drivers / ieee1394 / hosts.h
1 #ifndef _IEEE1394_HOSTS_H
2 #define _IEEE1394_HOSTS_H
3
4 #include <linux/device.h>
5 #include <linux/wait.h>
6 #include <linux/list.h>
7 #include <linux/timer.h>
8 #include <linux/skbuff.h>
9
10 #include <asm/semaphore.h>
11
12 #include "ieee1394_types.h"
13 #include "csr.h"
14
15
16 struct hpsb_packet;
17 struct hpsb_iso;
18
19 struct hpsb_host {
20         struct list_head host_list;
21
22         void *hostdata;
23
24         atomic_t generation;
25
26         struct sk_buff_head pending_packet_queue;
27
28         struct timer_list timeout;
29         unsigned long timeout_interval;
30
31         unsigned char iso_listen_count[64];
32
33         int node_count; /* number of identified nodes on this bus */
34         int selfid_count; /* total number of SelfIDs received */
35         int nodes_active; /* number of nodes that are actually active */
36
37         nodeid_t node_id; /* node ID of this host */
38         nodeid_t irm_id; /* ID of this bus' isochronous resource manager */
39         nodeid_t busmgr_id; /* ID of this bus' bus manager */
40
41         /* this nodes state */
42         unsigned in_bus_reset:1;
43         unsigned is_shutdown:1;
44
45         /* this nodes' duties on the bus */
46         unsigned is_root:1;
47         unsigned is_cycmst:1;
48         unsigned is_irm:1;
49         unsigned is_busmgr:1;
50
51         int reset_retries;
52         quadlet_t *topology_map;
53         u8 *speed_map;
54         struct csr_control csr;
55
56         /* Per node tlabel pool allocation */
57         struct hpsb_tlabel_pool tpool[64];
58
59         struct hpsb_host_driver *driver;
60
61         struct pci_dev *pdev;
62
63         int id;
64
65         struct device device;
66         struct class_device class_dev;
67
68         int update_config_rom;
69         struct work_struct delayed_reset;
70
71         unsigned int config_roms;
72
73         struct list_head addr_space;
74 };
75
76
77
78 enum devctl_cmd {
79         /* Host is requested to reset its bus and cancel all outstanding async
80          * requests.  If arg == 1, it shall also attempt to become root on the
81          * bus.  Return void. */
82         RESET_BUS,
83
84         /* Arg is void, return value is the hardware cycle counter value. */
85         GET_CYCLE_COUNTER,
86
87         /* Set the hardware cycle counter to the value in arg, return void.
88          * FIXME - setting is probably not required. */
89         SET_CYCLE_COUNTER,
90
91         /* Configure hardware for new bus ID in arg, return void. */
92         SET_BUS_ID,
93
94         /* If arg true, start sending cycle start packets, stop if arg == 0.
95          * Return void. */
96         ACT_CYCLE_MASTER,
97
98         /* Cancel all outstanding async requests without resetting the bus.
99          * Return void. */
100         CANCEL_REQUESTS,
101
102         /* Start or stop receiving isochronous channel in arg.  Return void.
103          * This acts as an optimization hint, hosts are not required not to
104          * listen on unrequested channels. */
105         ISO_LISTEN_CHANNEL,
106         ISO_UNLISTEN_CHANNEL
107 };
108
109 enum isoctl_cmd {
110         /* rawiso API - see iso.h for the meanings of these commands
111            (they correspond exactly to the hpsb_iso_* API functions)
112          * INIT = allocate resources
113          * START = begin transmission/reception
114          * STOP = halt transmission/reception
115          * QUEUE/RELEASE = produce/consume packets
116          * SHUTDOWN = deallocate resources
117          */
118
119         XMIT_INIT,
120         XMIT_START,
121         XMIT_STOP,
122         XMIT_QUEUE,
123         XMIT_SHUTDOWN,
124
125         RECV_INIT,
126         RECV_LISTEN_CHANNEL,   /* multi-channel only */
127         RECV_UNLISTEN_CHANNEL, /* multi-channel only */
128         RECV_SET_CHANNEL_MASK, /* multi-channel only; arg is a *u64 */
129         RECV_START,
130         RECV_STOP,
131         RECV_RELEASE,
132         RECV_SHUTDOWN,
133         RECV_FLUSH
134 };
135
136 enum reset_types {
137         /* 166 microsecond reset -- only type of reset available on
138            non-1394a capable IEEE 1394 controllers */
139         LONG_RESET,
140
141         /* Short (arbitrated) reset -- only available on 1394a capable
142            IEEE 1394 capable controllers */
143         SHORT_RESET,
144
145         /* Variants, that set force_root before issueing the bus reset */
146         LONG_RESET_FORCE_ROOT, SHORT_RESET_FORCE_ROOT,
147
148         /* Variants, that clear force_root before issueing the bus reset */
149         LONG_RESET_NO_FORCE_ROOT, SHORT_RESET_NO_FORCE_ROOT
150 };
151
152 struct hpsb_host_driver {
153         struct module *owner;
154         const char *name;
155
156         /* The hardware driver may optionally support a function that is used
157          * to set the hardware ConfigROM if the hardware supports handling
158          * reads to the ConfigROM on its own. */
159         void (*set_hw_config_rom) (struct hpsb_host *host, quadlet_t *config_rom);
160
161         /* This function shall implement packet transmission based on
162          * packet->type.  It shall CRC both parts of the packet (unless
163          * packet->type == raw) and do byte-swapping as necessary or instruct
164          * the hardware to do so.  It can return immediately after the packet
165          * was queued for sending.  After sending, hpsb_sent_packet() has to be
166          * called.  Return 0 on success, negative errno on failure.
167          * NOTE: The function must be callable in interrupt context.
168          */
169         int (*transmit_packet) (struct hpsb_host *host,
170                                 struct hpsb_packet *packet);
171
172         /* This function requests miscellanous services from the driver, see
173          * above for command codes and expected actions.  Return -1 for unknown
174          * command, though that should never happen.
175          */
176         int (*devctl) (struct hpsb_host *host, enum devctl_cmd command, int arg);
177
178          /* ISO transmission/reception functions. Return 0 on success, -1
179           * (or -EXXX errno code) on failure. If the low-level driver does not
180           * support the new ISO API, set isoctl to NULL.
181           */
182         int (*isoctl) (struct hpsb_iso *iso, enum isoctl_cmd command, unsigned long arg);
183
184         /* This function is mainly to redirect local CSR reads/locks to the iso
185          * management registers (bus manager id, bandwidth available, channels
186          * available) to the hardware registers in OHCI.  reg is 0,1,2,3 for bus
187          * mgr, bwdth avail, ch avail hi, ch avail lo respectively (the same ids
188          * as OHCI uses).  data and compare are the new data and expected data
189          * respectively, return value is the old value.
190          */
191         quadlet_t (*hw_csr_reg) (struct hpsb_host *host, int reg,
192                                  quadlet_t data, quadlet_t compare);
193 };
194
195
196 struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra,
197                                   struct device *dev);
198 int hpsb_add_host(struct hpsb_host *host);
199 void hpsb_remove_host(struct hpsb_host *h);
200
201 /* The following 2 functions are deprecated and will be removed when the
202  * raw1394/libraw1394 update is complete. */
203 int hpsb_update_config_rom(struct hpsb_host *host,
204       const quadlet_t *new_rom, size_t size, unsigned char rom_version);
205 int hpsb_get_config_rom(struct hpsb_host *host, quadlet_t *buffer,
206       size_t buffersize, size_t *rom_size, unsigned char *rom_version);
207
208 /* Updates the configuration rom image of a host.  rom_version must be the
209  * current version, otherwise it will fail with return value -1. If this
210  * host does not support config-rom-update, it will return -EINVAL.
211  * Return value 0 indicates success.
212  */
213 int hpsb_update_config_rom_image(struct hpsb_host *host);
214
215 #endif /* _IEEE1394_HOSTS_H */