Merge to Fedora kernel-2.6.18-1.2224_FC5 patched with stable patch-2.6.18.1-vs2.0...
[linux-2.6.git] / drivers / media / dvb / frontends / mt312.c
1 /*
2     Driver for Zarlink VP310/MT312 Satellite Channel Decoder
3
4     Copyright (C) 2003 Andreas Oberritter <obi@linuxtv.org>
5
6     This program is free software; you can redistribute it and/or modify
7     it under the terms of the GNU General Public License as published by
8     the Free Software Foundation; either version 2 of the License, or
9     (at your option) any later version.
10
11     This program is distributed in the hope that it will be useful,
12     but WITHOUT ANY WARRANTY; without even the implied warranty of
13     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14
15     GNU General Public License for more details.
16
17     You should have received a copy of the GNU General Public License
18     along with this program; if not, write to the Free Software
19     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20
21     References:
22     http://products.zarlink.com/product_profiles/MT312.htm
23     http://products.zarlink.com/product_profiles/SL1935.htm
24 */
25
26 #include <linux/delay.h>
27 #include <linux/errno.h>
28 #include <linux/init.h>
29 #include <linux/kernel.h>
30 #include <linux/module.h>
31 #include <linux/moduleparam.h>
32 #include <linux/string.h>
33 #include <linux/slab.h>
34
35 #include "dvb_frontend.h"
36 #include "mt312_priv.h"
37 #include "mt312.h"
38
39
40 struct mt312_state {
41         struct i2c_adapter* i2c;
42         /* configuration settings */
43         const struct mt312_config* config;
44         struct dvb_frontend frontend;
45
46         u8 id;
47         u8 frequency;
48 };
49
50 static int debug;
51 #define dprintk(args...) \
52         do { \
53                 if (debug) printk(KERN_DEBUG "mt312: " args); \
54         } while (0)
55
56 #define MT312_SYS_CLK           90000000UL      /* 90 MHz */
57 #define MT312_LPOWER_SYS_CLK    60000000UL      /* 60 MHz */
58 #define MT312_PLL_CLK           10000000UL      /* 10 MHz */
59
60 static int mt312_read(struct mt312_state* state, const enum mt312_reg_addr reg,
61                       void *buf, const size_t count)
62 {
63         int ret;
64         struct i2c_msg msg[2];
65         u8 regbuf[1] = { reg };
66
67         msg[0].addr = state->config->demod_address;
68         msg[0].flags = 0;
69         msg[0].buf = regbuf;
70         msg[0].len = 1;
71         msg[1].addr = state->config->demod_address;
72         msg[1].flags = I2C_M_RD;
73         msg[1].buf = buf;
74         msg[1].len = count;
75
76         ret = i2c_transfer(state->i2c, msg, 2);
77
78         if (ret != 2) {
79                 printk(KERN_ERR "%s: ret == %d\n", __FUNCTION__, ret);
80                 return -EREMOTEIO;
81         }
82
83         if(debug) {
84                 int i;
85                 dprintk("R(%d):", reg & 0x7f);
86                 for (i = 0; i < count; i++)
87                         printk(" %02x", ((const u8 *) buf)[i]);
88                 printk("\n");
89         }
90
91         return 0;
92 }
93
94 static int mt312_write(struct mt312_state* state, const enum mt312_reg_addr reg,
95                        const void *src, const size_t count)
96 {
97         int ret;
98         u8 buf[count + 1];
99         struct i2c_msg msg;
100
101         if(debug) {
102                 int i;
103                 dprintk("W(%d):", reg & 0x7f);
104                 for (i = 0; i < count; i++)
105                         printk(" %02x", ((const u8 *) src)[i]);
106                 printk("\n");
107         }
108
109         buf[0] = reg;
110         memcpy(&buf[1], src, count);
111
112         msg.addr = state->config->demod_address;
113         msg.flags = 0;
114         msg.buf = buf;
115         msg.len = count + 1;
116
117         ret = i2c_transfer(state->i2c, &msg, 1);
118
119         if (ret != 1) {
120                 dprintk("%s: ret == %d\n", __FUNCTION__, ret);
121                 return -EREMOTEIO;
122         }
123
124         return 0;
125 }
126
127 static inline int mt312_readreg(struct mt312_state* state,
128                                 const enum mt312_reg_addr reg, u8 *val)
129 {
130         return mt312_read(state, reg, val, 1);
131 }
132
133 static inline int mt312_writereg(struct mt312_state* state,
134                                  const enum mt312_reg_addr reg, const u8 val)
135 {
136         return mt312_write(state, reg, &val, 1);
137 }
138
139 static inline u32 mt312_div(u32 a, u32 b)
140 {
141         return (a + (b / 2)) / b;
142 }
143
144 static int mt312_reset(struct mt312_state* state, const u8 full)
145 {
146         return mt312_writereg(state, RESET, full ? 0x80 : 0x40);
147 }
148
149 static int mt312_get_inversion(struct mt312_state* state,
150                                fe_spectral_inversion_t *i)
151 {
152         int ret;
153         u8 vit_mode;
154
155         if ((ret = mt312_readreg(state, VIT_MODE, &vit_mode)) < 0)
156                 return ret;
157
158         if (vit_mode & 0x80)    /* auto inversion was used */
159                 *i = (vit_mode & 0x40) ? INVERSION_ON : INVERSION_OFF;
160
161         return 0;
162 }
163
164 static int mt312_get_symbol_rate(struct mt312_state* state, u32 *sr)
165 {
166         int ret;
167         u8 sym_rate_h;
168         u8 dec_ratio;
169         u16 sym_rat_op;
170         u16 monitor;
171         u8 buf[2];
172
173         if ((ret = mt312_readreg(state, SYM_RATE_H, &sym_rate_h)) < 0)
174                 return ret;
175
176         if (sym_rate_h & 0x80) {        /* symbol rate search was used */
177                 if ((ret = mt312_writereg(state, MON_CTRL, 0x03)) < 0)
178                         return ret;
179
180                 if ((ret = mt312_read(state, MONITOR_H, buf, sizeof(buf))) < 0)
181                         return ret;
182
183                 monitor = (buf[0] << 8) | buf[1];
184
185                 dprintk(KERN_DEBUG "sr(auto) = %u\n",
186                        mt312_div(monitor * 15625, 4));
187         } else {
188                 if ((ret = mt312_writereg(state, MON_CTRL, 0x05)) < 0)
189                         return ret;
190
191                 if ((ret = mt312_read(state, MONITOR_H, buf, sizeof(buf))) < 0)
192                         return ret;
193
194                 dec_ratio = ((buf[0] >> 5) & 0x07) * 32;
195
196                 if ((ret = mt312_read(state, SYM_RAT_OP_H, buf, sizeof(buf))) < 0)
197                         return ret;
198
199                 sym_rat_op = (buf[0] << 8) | buf[1];
200
201                 dprintk(KERN_DEBUG "sym_rat_op=%d dec_ratio=%d\n",
202                        sym_rat_op, dec_ratio);
203                 dprintk(KERN_DEBUG "*sr(manual) = %lu\n",
204                        (((MT312_PLL_CLK * 8192) / (sym_rat_op + 8192)) *
205                         2) - dec_ratio);
206         }
207
208         return 0;
209 }
210
211 static int mt312_get_code_rate(struct mt312_state* state, fe_code_rate_t *cr)
212 {
213         const fe_code_rate_t fec_tab[8] =
214             { FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_6_7, FEC_7_8,
215                 FEC_AUTO, FEC_AUTO };
216
217         int ret;
218         u8 fec_status;
219
220         if ((ret = mt312_readreg(state, FEC_STATUS, &fec_status)) < 0)
221                 return ret;
222
223         *cr = fec_tab[(fec_status >> 4) & 0x07];
224
225         return 0;
226 }
227
228 static int mt312_initfe(struct dvb_frontend* fe)
229 {
230         struct mt312_state *state = fe->demodulator_priv;
231         int ret;
232         u8 buf[2];
233
234         /* wake up */
235         if ((ret = mt312_writereg(state, CONFIG, (state->frequency == 60 ? 0x88 : 0x8c))) < 0)
236                 return ret;
237
238         /* wait at least 150 usec */
239         udelay(150);
240
241         /* full reset */
242         if ((ret = mt312_reset(state, 1)) < 0)
243                 return ret;
244
245 // Per datasheet, write correct values. 09/28/03 ACCJr.
246 // If we don't do this, we won't get FE_HAS_VITERBI in the VP310.
247         {
248                 u8 buf_def[8]={0x14, 0x12, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00};
249
250                 if ((ret = mt312_write(state, VIT_SETUP, buf_def, sizeof(buf_def))) < 0)
251                         return ret;
252         }
253
254         /* SYS_CLK */
255         buf[0] = mt312_div((state->frequency == 60 ? MT312_LPOWER_SYS_CLK : MT312_SYS_CLK) * 2, 1000000);
256
257         /* DISEQC_RATIO */
258         buf[1] = mt312_div(MT312_PLL_CLK, 15000 * 4);
259
260         if ((ret = mt312_write(state, SYS_CLK, buf, sizeof(buf))) < 0)
261                 return ret;
262
263         if ((ret = mt312_writereg(state, SNR_THS_HIGH, 0x32)) < 0)
264                 return ret;
265
266         if ((ret = mt312_writereg(state, OP_CTRL, 0x53)) < 0)
267                 return ret;
268
269         /* TS_SW_LIM */
270         buf[0] = 0x8c;
271         buf[1] = 0x98;
272
273         if ((ret = mt312_write(state, TS_SW_LIM_L, buf, sizeof(buf))) < 0)
274                 return ret;
275
276         if ((ret = mt312_writereg(state, CS_SW_LIM, 0x69)) < 0)
277                 return ret;
278
279         return 0;
280 }
281
282 static int mt312_send_master_cmd(struct dvb_frontend* fe,
283                                  struct dvb_diseqc_master_cmd *c)
284 {
285         struct mt312_state *state = fe->demodulator_priv;
286         int ret;
287         u8 diseqc_mode;
288
289         if ((c->msg_len == 0) || (c->msg_len > sizeof(c->msg)))
290                 return -EINVAL;
291
292         if ((ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode)) < 0)
293                 return ret;
294
295         if ((ret =
296              mt312_write(state, (0x80 | DISEQC_INSTR), c->msg, c->msg_len)) < 0)
297                 return ret;
298
299         if ((ret =
300              mt312_writereg(state, DISEQC_MODE,
301                             (diseqc_mode & 0x40) | ((c->msg_len - 1) << 3)
302                             | 0x04)) < 0)
303                 return ret;
304
305         /* set DISEQC_MODE[2:0] to zero if a return message is expected */
306         if (c->msg[0] & 0x02)
307                 if ((ret =
308                      mt312_writereg(state, DISEQC_MODE, (diseqc_mode & 0x40))) < 0)
309                         return ret;
310
311         return 0;
312 }
313
314 static int mt312_send_burst(struct dvb_frontend* fe, const fe_sec_mini_cmd_t c)
315 {
316         struct mt312_state *state = fe->demodulator_priv;
317         const u8 mini_tab[2] = { 0x02, 0x03 };
318
319         int ret;
320         u8 diseqc_mode;
321
322         if (c > SEC_MINI_B)
323                 return -EINVAL;
324
325         if ((ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode)) < 0)
326                 return ret;
327
328         if ((ret =
329              mt312_writereg(state, DISEQC_MODE,
330                             (diseqc_mode & 0x40) | mini_tab[c])) < 0)
331                 return ret;
332
333         return 0;
334 }
335
336 static int mt312_set_tone(struct dvb_frontend* fe, const fe_sec_tone_mode_t t)
337 {
338         struct mt312_state *state = fe->demodulator_priv;
339         const u8 tone_tab[2] = { 0x01, 0x00 };
340
341         int ret;
342         u8 diseqc_mode;
343
344         if (t > SEC_TONE_OFF)
345                 return -EINVAL;
346
347         if ((ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode)) < 0)
348                 return ret;
349
350         if ((ret =
351              mt312_writereg(state, DISEQC_MODE,
352                             (diseqc_mode & 0x40) | tone_tab[t])) < 0)
353                 return ret;
354
355         return 0;
356 }
357
358 static int mt312_set_voltage(struct dvb_frontend* fe, const fe_sec_voltage_t v)
359 {
360         struct mt312_state *state = fe->demodulator_priv;
361         const u8 volt_tab[3] = { 0x00, 0x40, 0x00 };
362
363         if (v > SEC_VOLTAGE_OFF)
364                 return -EINVAL;
365
366         return mt312_writereg(state, DISEQC_MODE, volt_tab[v]);
367 }
368
369 static int mt312_read_status(struct dvb_frontend* fe, fe_status_t *s)
370 {
371         struct mt312_state *state = fe->demodulator_priv;
372         int ret;
373         u8 status[3];
374
375         *s = 0;
376
377         if ((ret = mt312_read(state, QPSK_STAT_H, status, sizeof(status))) < 0)
378                 return ret;
379
380         dprintk(KERN_DEBUG "QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x, FEC_STATUS: 0x%02x\n", status[0], status[1], status[2]);
381
382         if (status[0] & 0xc0)
383                 *s |= FE_HAS_SIGNAL;    /* signal noise ratio */
384         if (status[0] & 0x04)
385                 *s |= FE_HAS_CARRIER;   /* qpsk carrier lock */
386         if (status[2] & 0x02)
387                 *s |= FE_HAS_VITERBI;   /* viterbi lock */
388         if (status[2] & 0x04)
389                 *s |= FE_HAS_SYNC;      /* byte align lock */
390         if (status[0] & 0x01)
391                 *s |= FE_HAS_LOCK;      /* qpsk lock */
392
393         return 0;
394 }
395
396 static int mt312_read_ber(struct dvb_frontend* fe, u32 *ber)
397 {
398         struct mt312_state *state = fe->demodulator_priv;
399         int ret;
400         u8 buf[3];
401
402         if ((ret = mt312_read(state, RS_BERCNT_H, buf, 3)) < 0)
403                 return ret;
404
405         *ber = ((buf[0] << 16) | (buf[1] << 8) | buf[2]) * 64;
406
407         return 0;
408 }
409
410 static int mt312_read_signal_strength(struct dvb_frontend* fe, u16 *signal_strength)
411 {
412         struct mt312_state *state = fe->demodulator_priv;
413         int ret;
414         u8 buf[3];
415         u16 agc;
416         s16 err_db;
417
418         if ((ret = mt312_read(state, AGC_H, buf, sizeof(buf))) < 0)
419                 return ret;
420
421         agc = (buf[0] << 6) | (buf[1] >> 2);
422         err_db = (s16) (((buf[1] & 0x03) << 14) | buf[2] << 6) >> 6;
423
424         *signal_strength = agc;
425
426         dprintk(KERN_DEBUG "agc=%08x err_db=%hd\n", agc, err_db);
427
428         return 0;
429 }
430
431 static int mt312_read_snr(struct dvb_frontend* fe, u16 *snr)
432 {
433         struct mt312_state *state = fe->demodulator_priv;
434         int ret;
435         u8 buf[2];
436
437         if ((ret = mt312_read(state, M_SNR_H, &buf, sizeof(buf))) < 0)
438                 return ret;
439
440         *snr = 0xFFFF - ((((buf[0] & 0x7f) << 8) | buf[1]) << 1);
441
442         return 0;
443 }
444
445 static int mt312_read_ucblocks(struct dvb_frontend* fe, u32 *ubc)
446 {
447         struct mt312_state *state = fe->demodulator_priv;
448         int ret;
449         u8 buf[2];
450
451         if ((ret = mt312_read(state, RS_UBC_H, &buf, sizeof(buf))) < 0)
452                 return ret;
453
454         *ubc = (buf[0] << 8) | buf[1];
455
456         return 0;
457 }
458
459 static int mt312_set_frontend(struct dvb_frontend* fe,
460                               struct dvb_frontend_parameters *p)
461 {
462         struct mt312_state *state = fe->demodulator_priv;
463         int ret;
464         u8 buf[5], config_val;
465         u16 sr;
466
467         const u8 fec_tab[10] =
468             { 0x00, 0x01, 0x02, 0x04, 0x3f, 0x08, 0x10, 0x20, 0x3f, 0x3f };
469         const u8 inv_tab[3] = { 0x00, 0x40, 0x80 };
470
471         dprintk("%s: Freq %d\n", __FUNCTION__, p->frequency);
472
473         if ((p->frequency < fe->ops.info.frequency_min)
474             || (p->frequency > fe->ops.info.frequency_max))
475                 return -EINVAL;
476
477         if ((p->inversion < INVERSION_OFF)
478             || (p->inversion > INVERSION_ON))
479                 return -EINVAL;
480
481         if ((p->u.qpsk.symbol_rate < fe->ops.info.symbol_rate_min)
482             || (p->u.qpsk.symbol_rate > fe->ops.info.symbol_rate_max))
483                 return -EINVAL;
484
485         if ((p->u.qpsk.fec_inner < FEC_NONE)
486             || (p->u.qpsk.fec_inner > FEC_AUTO))
487                 return -EINVAL;
488
489         if ((p->u.qpsk.fec_inner == FEC_4_5)
490             || (p->u.qpsk.fec_inner == FEC_8_9))
491                 return -EINVAL;
492
493         switch (state->id) {
494         case ID_VP310:
495         // For now we will do this only for the VP310.
496         // It should be better for the mt312 as well, but tunning will be slower. ACCJr 09/29/03
497                 ret = mt312_readreg(state, CONFIG, &config_val);
498                 if (ret < 0)
499                         return ret;
500                 if (p->u.qpsk.symbol_rate >= 30000000) //Note that 30MS/s should use 90MHz
501                 {
502                         if ((config_val & 0x0c) == 0x08) { //We are running 60MHz
503                                 state->frequency = 90;
504                                 if ((ret = mt312_initfe(fe)) < 0)
505                                         return ret;
506                         }
507                 }
508                 else
509                 {
510                         if ((config_val & 0x0c) == 0x0C) { //We are running 90MHz
511                                 state->frequency = 60;
512                                 if ((ret = mt312_initfe(fe)) < 0)
513                                         return ret;
514                         }
515                 }
516                 break;
517
518         case ID_MT312:
519                 break;
520
521         default:
522                 return -EINVAL;
523         }
524
525         if (fe->ops.tuner_ops.set_params) {
526                 fe->ops.tuner_ops.set_params(fe, p);
527                 if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
528         }
529
530         /* sr = (u16)(sr * 256.0 / 1000000.0) */
531         sr = mt312_div(p->u.qpsk.symbol_rate * 4, 15625);
532
533         /* SYM_RATE */
534         buf[0] = (sr >> 8) & 0x3f;
535         buf[1] = (sr >> 0) & 0xff;
536
537         /* VIT_MODE */
538         buf[2] = inv_tab[p->inversion] | fec_tab[p->u.qpsk.fec_inner];
539
540         /* QPSK_CTRL */
541         buf[3] = 0x40;          /* swap I and Q before QPSK demodulation */
542
543         if (p->u.qpsk.symbol_rate < 10000000)
544                 buf[3] |= 0x04; /* use afc mode */
545
546         /* GO */
547         buf[4] = 0x01;
548
549         if ((ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf))) < 0)
550                 return ret;
551
552         mt312_reset(state, 0);
553
554         return 0;
555 }
556
557 static int mt312_get_frontend(struct dvb_frontend* fe,
558                               struct dvb_frontend_parameters *p)
559 {
560         struct mt312_state *state = fe->demodulator_priv;
561         int ret;
562
563         if ((ret = mt312_get_inversion(state, &p->inversion)) < 0)
564                 return ret;
565
566         if ((ret = mt312_get_symbol_rate(state, &p->u.qpsk.symbol_rate)) < 0)
567                 return ret;
568
569         if ((ret = mt312_get_code_rate(state, &p->u.qpsk.fec_inner)) < 0)
570                 return ret;
571
572         return 0;
573 }
574
575 static int mt312_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
576 {
577         struct mt312_state* state = fe->demodulator_priv;
578
579         if (enable) {
580                 return mt312_writereg(state, GPP_CTRL, 0x40);
581         } else {
582                 return mt312_writereg(state, GPP_CTRL, 0x00);
583         }
584 }
585
586 static int mt312_sleep(struct dvb_frontend* fe)
587 {
588         struct mt312_state *state = fe->demodulator_priv;
589         int ret;
590         u8 config;
591
592         /* reset all registers to defaults */
593         if ((ret = mt312_reset(state, 1)) < 0)
594                 return ret;
595
596         if ((ret = mt312_readreg(state, CONFIG, &config)) < 0)
597                 return ret;
598
599         /* enter standby */
600         if ((ret = mt312_writereg(state, CONFIG, config & 0x7f)) < 0)
601                 return ret;
602
603         return 0;
604 }
605
606 static int mt312_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
607 {
608         fesettings->min_delay_ms = 50;
609         fesettings->step_size = 0;
610         fesettings->max_drift = 0;
611         return 0;
612 }
613
614 static void mt312_release(struct dvb_frontend* fe)
615 {
616         struct mt312_state* state = fe->demodulator_priv;
617         kfree(state);
618 }
619
620 static struct dvb_frontend_ops vp310_mt312_ops = {
621
622         .info = {
623                 .name = "Zarlink ???? DVB-S",
624                 .type = FE_QPSK,
625                 .frequency_min = 950000,
626                 .frequency_max = 2150000,
627                 .frequency_stepsize = (MT312_PLL_CLK / 1000) / 128,
628                 .symbol_rate_min = MT312_SYS_CLK / 128,
629                 .symbol_rate_max = MT312_SYS_CLK / 2,
630                 .caps =
631                     FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
632                     FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
633                     FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS |
634                     FE_CAN_RECOVER
635         },
636
637         .release = mt312_release,
638
639         .init = mt312_initfe,
640         .sleep = mt312_sleep,
641         .i2c_gate_ctrl = mt312_i2c_gate_ctrl,
642
643         .set_frontend = mt312_set_frontend,
644         .get_frontend = mt312_get_frontend,
645         .get_tune_settings = mt312_get_tune_settings,
646
647         .read_status = mt312_read_status,
648         .read_ber = mt312_read_ber,
649         .read_signal_strength = mt312_read_signal_strength,
650         .read_snr = mt312_read_snr,
651         .read_ucblocks = mt312_read_ucblocks,
652
653         .diseqc_send_master_cmd = mt312_send_master_cmd,
654         .diseqc_send_burst = mt312_send_burst,
655         .set_tone = mt312_set_tone,
656         .set_voltage = mt312_set_voltage,
657 };
658
659 struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
660                                         struct i2c_adapter* i2c)
661 {
662         struct mt312_state* state = NULL;
663
664         /* allocate memory for the internal state */
665         state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
666         if (state == NULL)
667                 goto error;
668
669         /* setup the state */
670         state->config = config;
671         state->i2c = i2c;
672
673         /* check if the demod is there */
674         if (mt312_readreg(state, ID, &state->id) < 0)
675                 goto error;
676
677         /* create dvb_frontend */
678         memcpy(&state->frontend.ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
679         state->frontend.demodulator_priv = state;
680
681         switch (state->id) {
682         case ID_VP310:
683                 strcpy(state->frontend.ops.info.name, "Zarlink VP310 DVB-S");
684                 state->frequency = 90;
685                 break;
686         case ID_MT312:
687                 strcpy(state->frontend.ops.info.name, "Zarlink MT312 DVB-S");
688                 state->frequency = 60;
689                 break;
690         default:
691                 printk (KERN_WARNING "Only Zarlink VP310/MT312 are supported chips.\n");
692                 goto error;
693         }
694
695         return &state->frontend;
696
697 error:
698         kfree(state);
699         return NULL;
700 }
701
702 module_param(debug, int, 0644);
703 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
704
705 MODULE_DESCRIPTION("Zarlink VP310/MT312 DVB-S Demodulator driver");
706 MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
707 MODULE_LICENSE("GPL");
708
709 EXPORT_SYMBOL(vp310_mt312_attach);