fedora core 6 1.2949 + vserver 2.2.0
[linux-2.6.git] / drivers / media / dvb / frontends / tda1004x.h
1   /*
2      Driver for Philips tda1004xh OFDM Frontend
3
4      (c) 2004 Andrew de Quincey
5
6      This program is free software; you can redistribute it and/or modify
7      it under the terms of the GNU General Public License as published by
8      the Free Software Foundation; either version 2 of the License, or
9      (at your option) any later version.
10
11      This program is distributed in the hope that it will be useful,
12      but WITHOUT ANY WARRANTY; without even the implied warranty of
13      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14
15      GNU General Public License for more details.
16
17      You should have received a copy of the GNU General Public License
18      along with this program; if not, write to the Free Software
19      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20
21    */
22
23 #ifndef TDA1004X_H
24 #define TDA1004X_H
25
26 #include <linux/dvb/frontend.h>
27 #include <linux/firmware.h>
28
29 enum tda10046_xtal {
30         TDA10046_XTAL_4M,
31         TDA10046_XTAL_16M,
32 };
33
34 enum tda10046_agc {
35         TDA10046_AGC_DEFAULT,           /* original configuration */
36         TDA10046_AGC_IFO_AUTO_NEG,      /* IF AGC only, automatic, negtive */
37         TDA10046_AGC_IFO_AUTO_POS,      /* IF AGC only, automatic, positive */
38         TDA10046_AGC_TDA827X_GP11,      /* IF AGC only, special setup for tda827x */
39         TDA10046_AGC_TDA827X_GP00,      /* same as above, but GPIOs 0 */
40         TDA10046_AGC_TDA827X_GP01,      /* same as above, but GPIO3=0 GPIO1=1*/
41 };
42
43 enum tda10046_if {
44         TDA10046_FREQ_3617,             /* original config, 36,166 MHZ */
45         TDA10046_FREQ_3613,             /* 36,13 MHZ */
46         TDA10046_FREQ_045,              /* low IF, 4.0, 4.5, or 5.0 MHZ */
47         TDA10046_FREQ_052,              /* low IF, 5.1667 MHZ for tda9889 */
48 };
49
50 struct tda1004x_config
51 {
52         /* the demodulator's i2c address */
53         u8 demod_address;
54
55         /* does the "inversion" need inverted? */
56         u8 invert;
57
58         /* Does the OCLK signal need inverted? */
59         u8 invert_oclk;
60
61         /* Xtal frequency, 4 or 16MHz*/
62         enum tda10046_xtal xtal_freq;
63
64         /* IF frequency */
65         enum tda10046_if if_freq;
66
67         /* AGC configuration */
68         enum tda10046_agc agc_config;
69
70         /* request firmware for device */
71         /* set this to NULL if the card has a firmware EEPROM */
72         int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
73 };
74
75 #if defined(CONFIG_DVB_TDA1004X) || (defined(CONFIG_DVB_TDA1004X_MODULE) && defined(MODULE))
76 extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
77                                             struct i2c_adapter* i2c);
78
79 extern struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
80                                             struct i2c_adapter* i2c);
81 #else
82 static inline struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
83                                             struct i2c_adapter* i2c)
84 {
85         printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
86         return NULL;
87 }
88 static inline struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
89                                             struct i2c_adapter* i2c)
90 {
91         printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
92         return NULL;
93 }
94 #endif // CONFIG_DVB_TDA1004X
95
96 static inline int tda1004x_writereg(struct dvb_frontend *fe, u8 reg, u8 val) {
97         int r = 0;
98         u8 buf[] = {reg, val};
99         if (fe->ops.write)
100                 r = fe->ops.write(fe, buf, 2);
101         return r;
102 }
103
104 #endif // TDA1004X_H