drivers/media/dvb/ttpci/budget-av.c

   1 /*
   2  * budget-av.c: driver for the SAA7146 based Budget DVB cards
   3  *              with analog video in
   4  *
   5  * Compiled from various sources by Michael Hunold <michael@mihu.de>
   6  *
   7  * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
   8  *                               Andrew de Quincey <adq_dvb@lidskialf.net>
   9  *
  10  * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
  11  *
  12  * Copyright (C) 1999-2002 Ralph  Metzler
  13  *                       & Marcus Metzler for convergence integrated media GmbH
  14  *
  15  * This program is free software; you can redistribute it and/or
  16  * modify it under the terms of the GNU General Public License
  17  * as published by the Free Software Foundation; either version 2
  18  * of the License, or (at your option) any later version.
  19  *
  20  *
  21  * This program is distributed in the hope that it will be useful,
  22  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  23  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  24  * GNU General Public License for more details.
  25  *
  26  *
  27  * You should have received a copy of the GNU General Public License
  28  * along with this program; if not, write to the Free Software
  29  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  30  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
  31  *
  32  *
  33  * the project's page is at http://www.linuxtv.org/dvb/
  34  */
  35
  36 #include "budget.h"
  37 #include "stv0299.h"
  38 #include "tda10021.h"
  39 #include "tda1004x.h"
  40 #include <media/saa7146_vv.h>
  41 #include <linux/module.h>
  42 #include <linux/errno.h>
  43 #include <linux/slab.h>
  44 #include <linux/interrupt.h>
  45 #include <linux/input.h>
  46 #include <linux/spinlock.h>
  47
  48 #include "dvb_ca_en50221.h"
  49
  50 #define DEBICICAM               0x02420000
  51
  52 struct budget_av {
  53         struct budget budget;
  54         struct video_device *vd;
  55         int cur_input;
  56         int has_saa7113;
  57         struct tasklet_struct ciintf_irq_tasklet;
  58         int slot_status;
  59         struct dvb_ca_en50221 ca;
  60 };
  61
  62 /* GPIO CI Connections:
  63  * 0 - Vcc/Reset (Reset is controlled by capacitor)
  64  * 1 - Attribute Memory
  65  * 2 - Card Enable (Active Low)
  66  * 3 - Card Detect
  67  */
  68
  69 /****************************************************************************
  70  * INITIALIZATION
  71  ****************************************************************************/
  72
  73 static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg)
  74 {
  75         u8 mm1[] = { 0x00 };
  76         u8 mm2[] = { 0x00 };
  77         struct i2c_msg msgs[2];
  78
  79         msgs[0].flags = 0;
  80         msgs[1].flags = I2C_M_RD;
  81         msgs[0].addr = msgs[1].addr = id / 2;
  82         mm1[0] = reg;
  83         msgs[0].len = 1;
  84         msgs[1].len = 1;
  85         msgs[0].buf = mm1;
  86         msgs[1].buf = mm2;
  87
  88         i2c_transfer(i2c, msgs, 2);
  89
  90         return mm2[0];
  91 }
  92
  93 static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len)
  94 {
  95         u8 mm1[] = { reg };
  96         struct i2c_msg msgs[2] = {
  97                 {.addr = id / 2,.flags = 0,.buf = mm1,.len = 1},
  98                 {.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len}
  99         };
 100
 101         if (i2c_transfer(i2c, msgs, 2) != 2)
 102                 return -EIO;
 103
 104         return 0;
 105 }
 106
 107 static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val)
 108 {
 109         u8 msg[2] = { reg, val };
 110         struct i2c_msg msgs;
 111
 112         msgs.flags = 0;
 113         msgs.addr = id / 2;
 114         msgs.len = 2;
 115         msgs.buf = msg;
 116         return i2c_transfer(i2c, &msgs, 1);
 117 }
 118
 119 static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
 120 {
 121         struct budget_av *budget_av = (struct budget_av *) ca->data;
 122         int result;
 123
 124         if (slot != 0)
 125                 return -EINVAL;
 126
 127         saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
 128         udelay(1);
 129
 130         result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 0);
 131
 132         if (result == -ETIMEDOUT)
 133                 budget_av->slot_status = 0;
 134         return result;
 135 }
 136
 137 static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
 138 {
 139         struct budget_av *budget_av = (struct budget_av *) ca->data;
 140         int result;
 141
 142         if (slot != 0)
 143                 return -EINVAL;
 144
 145         saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
 146         udelay(1);
 147
 148         result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 0);
 149
 150         if (result == -ETIMEDOUT)
 151                 budget_av->slot_status = 0;
 152         return result;
 153 }
 154
 155 static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
 156 {
 157         struct budget_av *budget_av = (struct budget_av *) ca->data;
 158         int result;
 159
 160         if (slot != 0)
 161                 return -EINVAL;
 162
 163         saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
 164         udelay(1);
 165
 166         result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
 167
 168         if (result == -ETIMEDOUT)
 169                 budget_av->slot_status = 0;
 170         return result;
 171 }
 172
 173 static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
 174 {
 175         struct budget_av *budget_av = (struct budget_av *) ca->data;
 176         int result;
 177
 178         if (slot != 0)
 179                 return -EINVAL;
 180
 181         saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
 182         udelay(1);
 183
 184         result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
 185
 186         if (result == -ETIMEDOUT)
 187                 budget_av->slot_status = 0;
 188         return result;
 189 }
 190
 191 static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
 192 {
 193         struct budget_av *budget_av = (struct budget_av *) ca->data;
 194         struct saa7146_dev *saa = budget_av->budget.dev;
 195         int timeout = 50; // 5 seconds (4.4.6 Ready)
 196
 197         if (slot != 0)
 198                 return -EINVAL;
 199
 200         dprintk(1, "ciintf_slot_reset\n");
 201
 202         saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
 203
 204         saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
 205         msleep(2);
 206         saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */
 207         msleep(20); /* 20 ms Vcc settling time */
 208
 209         saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
 210
 211         /* This should have been based on pin 16 READY of the pcmcia port,
 212          * but AFAICS it is not routed to the saa7146 */
 213         while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
 214                 msleep(100);
 215
 216         if (timeout <= 0)
 217         {
 218                 printk(KERN_ERR "budget-av: cam reset failed (timeout).\n");
 219                 saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
 220                 saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
 221                 return -ETIMEDOUT;
 222         }
 223
 224         return 0;
 225 }
 226
 227 static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
 228 {
 229         struct budget_av *budget_av = (struct budget_av *) ca->data;
 230         struct saa7146_dev *saa = budget_av->budget.dev;
 231
 232         if (slot != 0)
 233                 return -EINVAL;
 234
 235         dprintk(1, "ciintf_slot_shutdown\n");
 236
 237         ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
 238         budget_av->slot_status = 0;
 239         return 0;
 240 }
 241
 242 static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
 243 {
 244         struct budget_av *budget_av = (struct budget_av *) ca->data;
 245         struct saa7146_dev *saa = budget_av->budget.dev;
 246
 247         if (slot != 0)
 248                 return -EINVAL;
 249
 250         dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
 251
 252         ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
 253         return 0;
 254 }
 255
 256 static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
 257 {
 258         struct budget_av *budget_av = (struct budget_av *) ca->data;
 259         struct saa7146_dev *saa = budget_av->budget.dev;
 260
 261         if (slot != 0)
 262                 return -EINVAL;
 263
 264         if (!budget_av->slot_status) {
 265                 saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
 266                 udelay(1);
 267                 if (saa7146_read(saa, PSR) & MASK_06)
 268                 {
 269                         printk(KERN_INFO "budget-av: cam inserted\n");
 270                         budget_av->slot_status = 1;
 271                 }
 272                 saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
 273         } else if (!open) {
 274                 saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
 275                 if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT)
 276                 {
 277                         printk(KERN_INFO "budget-av: cam ejected\n");
 278                         saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
 279                         saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
 280                         budget_av->slot_status = 0;
 281                 }
 282         }
 283
 284         if (budget_av->slot_status == 1)
 285                 return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
 286
 287         return 0;
 288 }
 289
 290 static int ciintf_init(struct budget_av *budget_av)
 291 {
 292         struct saa7146_dev *saa = budget_av->budget.dev;
 293         int result;
 294
 295         memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
 296
 297         saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
 298         saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
 299         saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
 300         saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
 301
 302         /* Enable DEBI pins */
 303         saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
 304
 305         /* register CI interface */
 306         budget_av->ca.owner = THIS_MODULE;
 307         budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem;
 308         budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem;
 309         budget_av->ca.read_cam_control = ciintf_read_cam_control;
 310         budget_av->ca.write_cam_control = ciintf_write_cam_control;
 311         budget_av->ca.slot_reset = ciintf_slot_reset;
 312         budget_av->ca.slot_shutdown = ciintf_slot_shutdown;
 313         budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
 314         budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
 315         budget_av->ca.data = budget_av;
 316
 317         if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
 318                                           &budget_av->ca, 0, 1)) != 0) {
 319                 printk(KERN_ERR "budget-av: ci initialisation failed.\n");
 320                 goto error;
 321         }
 322
 323         printk(KERN_INFO "budget-av: ci interface initialised.\n");
 324         budget_av->budget.ci_present = 1;
 325         return 0;
 326
 327 error:
 328         saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
 329         return result;
 330 }
 331
 332 static void ciintf_deinit(struct budget_av *budget_av)
 333 {
 334         struct saa7146_dev *saa = budget_av->budget.dev;
 335
 336         saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
 337         saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
 338         saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
 339         saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
 340
 341         /* release the CA device */
 342         dvb_ca_en50221_release(&budget_av->ca);
 343
 344         /* disable DEBI pins */
 345         saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
 346 }
 347
 348
 349 static const u8 saa7113_tab[] = {
 350         0x01, 0x08,
 351         0x02, 0xc0,
 352         0x03, 0x33,
 353         0x04, 0x00,
 354         0x05, 0x00,
 355         0x06, 0xeb,
 356         0x07, 0xe0,
 357         0x08, 0x28,
 358         0x09, 0x00,
 359         0x0a, 0x80,
 360         0x0b, 0x47,
 361         0x0c, 0x40,
 362         0x0d, 0x00,
 363         0x0e, 0x01,
 364         0x0f, 0x44,
 365
 366         0x10, 0x08,
 367         0x11, 0x0c,
 368         0x12, 0x7b,
 369         0x13, 0x00,
 370         0x15, 0x00, 0x16, 0x00, 0x17, 0x00,
 371
 372         0x57, 0xff,
 373         0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07,
 374         0x5b, 0x83, 0x5e, 0x00,
 375         0xff
 376 };
 377
 378 static int saa7113_init(struct budget_av *budget_av)
 379 {
 380         struct budget *budget = &budget_av->budget;
 381         struct saa7146_dev *saa = budget->dev;
 382         const u8 *data = saa7113_tab;
 383
 384         saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
 385         msleep(200);
 386
 387         if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
 388                 dprintk(1, "saa7113 not found on KNC card\n");
 389                 return -ENODEV;
 390         }
 391
 392         dprintk(1, "saa7113 detected and initializing\n");
 393
 394         while (*data != 0xff) {
 395                 i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1));
 396                 data += 2;
 397         }
 398
 399         dprintk(1, "saa7113  status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f));
 400
 401         return 0;
 402 }
 403
 404 static int saa7113_setinput(struct budget_av *budget_av, int input)
 405 {
 406         struct budget *budget = &budget_av->budget;
 407
 408         if (1 != budget_av->has_saa7113)
 409                 return -ENODEV;
 410
 411         if (input == 1) {
 412                 i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7);
 413                 i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80);
 414         } else if (input == 0) {
 415                 i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0);
 416                 i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00);
 417         } else
 418                 return -EINVAL;
 419
 420         budget_av->cur_input = input;
 421         return 0;
 422 }
 423
 424
 425 static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
 426 {
 427         u8 aclk = 0;
 428         u8 bclk = 0;
 429         u8 m1;
 430
 431         aclk = 0xb5;
 432         if (srate < 2000000)
 433                 bclk = 0x86;
 434         else if (srate < 5000000)
 435                 bclk = 0x89;
 436         else if (srate < 15000000)
 437                 bclk = 0x8f;
 438         else if (srate < 45000000)
 439                 bclk = 0x95;
 440
 441         m1 = 0x14;
 442         if (srate < 4000000)
 443                 m1 = 0x10;
 444
 445         stv0299_writereg(fe, 0x13, aclk);
 446         stv0299_writereg(fe, 0x14, bclk);
 447         stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
 448         stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
 449         stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
 450         stv0299_writereg(fe, 0x0f, 0x80 | m1);
 451
 452         return 0;
 453 }
 454
 455 static int philips_su1278_ty_ci_pll_set(struct dvb_frontend *fe,
 456                                         struct dvb_frontend_parameters *params)
 457 {
 458         struct budget_av *budget_av = (struct budget_av *) fe->dvb->priv;
 459         u32 div;
 460         u8 buf[4];
 461         struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
 462
 463         if ((params->frequency < 950000) || (params->frequency > 2150000))
 464                 return -EINVAL;
 465
 466         div = (params->frequency + (125 - 1)) / 125;    // round correctly
 467         buf[0] = (div >> 8) & 0x7f;
 468         buf[1] = div & 0xff;
 469         buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
 470         buf[3] = 0x20;
 471
 472         if (params->u.qpsk.symbol_rate < 4000000)
 473                 buf[3] |= 1;
 474
 475         if (params->frequency < 1250000)
 476                 buf[3] |= 0;
 477         else if (params->frequency < 1550000)
 478                 buf[3] |= 0x40;
 479         else if (params->frequency < 2050000)
 480                 buf[3] |= 0x80;
 481         else if (params->frequency < 2150000)
 482                 buf[3] |= 0xC0;
 483
 484         if (i2c_transfer(&budget_av->budget.i2c_adap, &msg, 1) != 1)
 485                 return -EIO;
 486         return 0;
 487 }
 488
 489 static u8 typhoon_cinergy1200s_inittab[] = {
 490         0x01, 0x15,
 491         0x02, 0x30,
 492         0x03, 0x00,
 493         0x04, 0x7d,             /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
 494         0x05, 0x35,             /* I2CT = 0, SCLT = 1, SDAT = 1 */
 495         0x06, 0x40,             /* DAC not used, set to high impendance mode */
 496         0x07, 0x00,             /* DAC LSB */
 497         0x08, 0x40,             /* DiSEqC off */
 498         0x09, 0x00,             /* FIFO */
 499         0x0c, 0x51,             /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
 500         0x0d, 0x82,             /* DC offset compensation = ON, beta_agc1 = 2 */
 501         0x0e, 0x23,             /* alpha_tmg = 2, beta_tmg = 3 */
 502         0x10, 0x3f,             // AGC2  0x3d
 503         0x11, 0x84,
 504         0x12, 0xb5,             // Lock detect: -64  Carrier freq detect:on
 505         0x15, 0xc9,             // lock detector threshold
 506         0x16, 0x00,
 507         0x17, 0x00,
 508         0x18, 0x00,
 509         0x19, 0x00,
 510         0x1a, 0x00,
 511         0x1f, 0x50,
 512         0x20, 0x00,
 513         0x21, 0x00,
 514         0x22, 0x00,
 515         0x23, 0x00,
 516         0x28, 0x00,             // out imp: normal  out type: parallel FEC mode:0
 517         0x29, 0x1e,             // 1/2 threshold
 518         0x2a, 0x14,             // 2/3 threshold
 519         0x2b, 0x0f,             // 3/4 threshold
 520         0x2c, 0x09,             // 5/6 threshold
 521         0x2d, 0x05,             // 7/8 threshold
 522         0x2e, 0x01,
 523         0x31, 0x1f,             // test all FECs
 524         0x32, 0x19,             // viterbi and synchro search
 525         0x33, 0xfc,             // rs control
 526         0x34, 0x93,             // error control
 527         0x0f, 0x92,
 528         0xff, 0xff
 529 };
 530
 531 static struct stv0299_config typhoon_config = {
 532         .demod_address = 0x68,
 533         .inittab = typhoon_cinergy1200s_inittab,
 534         .mclk = 88000000UL,
 535         .invert = 0,
 536         .enhanced_tuning = 0,
 537         .skip_reinit = 0,
 538         .lock_output = STV0229_LOCKOUTPUT_1,
 539         .volt13_op0_op1 = STV0299_VOLT13_OP0,
 540         .min_delay_ms = 100,
 541         .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
 542         .pll_set = philips_su1278_ty_ci_pll_set,
 543 };
 544
 545
 546 static struct stv0299_config cinergy_1200s_config = {
 547         .demod_address = 0x68,
 548         .inittab = typhoon_cinergy1200s_inittab,
 549         .mclk = 88000000UL,
 550         .invert = 0,
 551         .enhanced_tuning = 0,
 552         .skip_reinit = 0,
 553         .lock_output = STV0229_LOCKOUTPUT_0,
 554         .volt13_op0_op1 = STV0299_VOLT13_OP0,
 555         .min_delay_ms = 100,
 556         .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
 557         .pll_set = philips_su1278_ty_ci_pll_set,
 558 };
 559
 560
 561 static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 562 {
 563         struct budget *budget = (struct budget *) fe->dvb->priv;
 564         u8 buf[4];
 565         struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
 566
 567 #define TUNER_MUL 62500
 568
 569         u32 div = (params->frequency + 36125000 + TUNER_MUL / 2) / TUNER_MUL;
 570
 571         buf[0] = (div >> 8) & 0x7f;
 572         buf[1] = div & 0xff;
 573         buf[2] = 0x8e;
 574         buf[3] = (params->frequency < 174500000 ? 0xa1 :
 575                   params->frequency < 454000000 ? 0x92 : 0x34);
 576
 577         if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
 578                 return -EIO;
 579         return 0;
 580 }
 581
 582 static struct tda10021_config philips_cu1216_config = {
 583         .demod_address = 0x0c,
 584         .pll_set = philips_cu1216_pll_set,
 585 };
 586
 587
 588
 589
 590 static int philips_tu1216_pll_init(struct dvb_frontend *fe)
 591 {
 592         struct budget *budget = (struct budget *) fe->dvb->priv;
 593         static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
 594         struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
 595
 596         // setup PLL configuration
 597         if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
 598                 return -EIO;
 599         msleep(1);
 600
 601         return 0;
 602 }
 603
 604 static int philips_tu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 605 {
 606         struct budget *budget = (struct budget *) fe->dvb->priv;
 607         u8 tuner_buf[4];
 608         struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len =
 609                         sizeof(tuner_buf) };
 610         int tuner_frequency = 0;
 611         u8 band, cp, filter;
 612
 613         // determine charge pump
 614         tuner_frequency = params->frequency + 36166000;
 615         if (tuner_frequency < 87000000)
 616                 return -EINVAL;
 617         else if (tuner_frequency < 130000000)
 618                 cp = 3;
 619         else if (tuner_frequency < 160000000)
 620                 cp = 5;
 621         else if (tuner_frequency < 200000000)
 622                 cp = 6;
 623         else if (tuner_frequency < 290000000)
 624                 cp = 3;
 625         else if (tuner_frequency < 420000000)
 626                 cp = 5;
 627         else if (tuner_frequency < 480000000)
 628                 cp = 6;
 629         else if (tuner_frequency < 620000000)
 630                 cp = 3;
 631         else if (tuner_frequency < 830000000)
 632                 cp = 5;
 633         else if (tuner_frequency < 895000000)
 634                 cp = 7;
 635         else
 636                 return -EINVAL;
 637
 638         // determine band
 639         if (params->frequency < 49000000)
 640                 return -EINVAL;
 641         else if (params->frequency < 161000000)
 642                 band = 1;
 643         else if (params->frequency < 444000000)
 644                 band = 2;
 645         else if (params->frequency < 861000000)
 646                 band = 4;
 647         else
 648                 return -EINVAL;
 649
 650         // setup PLL filter
 651         switch (params->u.ofdm.bandwidth) {
 652         case BANDWIDTH_6_MHZ:
 653                 filter = 0;
 654                 break;
 655
 656         case BANDWIDTH_7_MHZ:
 657                 filter = 0;
 658                 break;
 659
 660         case BANDWIDTH_8_MHZ:
 661                 filter = 1;
 662                 break;
 663
 664         default:
 665                 return -EINVAL;
 666         }
 667
 668         // calculate divisor
 669         // ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
 670         tuner_frequency = (((params->frequency / 1000) * 6) + 217496) / 1000;
 671
 672         // setup tuner buffer
 673         tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
 674         tuner_buf[1] = tuner_frequency & 0xff;
 675         tuner_buf[2] = 0xca;
 676         tuner_buf[3] = (cp << 5) | (filter << 3) | band;
 677
 678         if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
 679                 return -EIO;
 680
 681         msleep(1);
 682         return 0;
 683 }
 684
 685 static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
 686                                            const struct firmware **fw, char *name)
 687 {
 688         struct budget *budget = (struct budget *) fe->dvb->priv;
 689
 690         return request_firmware(fw, name, &budget->dev->pci->dev);
 691 }
 692
 693 static struct tda1004x_config philips_tu1216_config = {
 694
 695         .demod_address = 0x8,
 696         .invert = 1,
 697         .invert_oclk = 1,
 698         .pll_init = philips_tu1216_pll_init,
 699         .pll_set = philips_tu1216_pll_set,
 700         .request_firmware = philips_tu1216_request_firmware,
 701 };
 702
 703
 704
 705
 706 static u8 read_pwm(struct budget_av *budget_av)
 707 {
 708         u8 b = 0xff;
 709         u8 pwm;
 710         struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1},
 711         {.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1}
 712         };
 713
 714         if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2)
 715             || (pwm == 0xff))
 716                 pwm = 0x48;
 717
 718         return pwm;
 719 }
 720
 721 #define SUBID_DVBS_KNC1         0x0010
 722 #define SUBID_DVBS_KNC1_PLUS    0x0011
 723 #define SUBID_DVBS_TYPHOON      0x4f56
 724 #define SUBID_DVBS_CINERGY1200  0x1154
 725
 726 #define SUBID_DVBC_KNC1         0x0020
 727 #define SUBID_DVBC_KNC1_PLUS    0x0021
 728 #define SUBID_DVBC_CINERGY1200  0x1156
 729
 730 #define SUBID_DVBT_KNC1_PLUS    0x0031
 731 #define SUBID_DVBT_KNC1         0x0030
 732 #define SUBID_DVBT_CINERGY1200  0x1157
 733
 734 static void frontend_init(struct budget_av *budget_av)
 735 {
 736         struct saa7146_dev * saa = budget_av->budget.dev;
 737         struct dvb_frontend * fe = NULL;
 738
 739         switch (saa->pci->subsystem_device) {
 740                 case SUBID_DVBS_KNC1_PLUS:
 741                 case SUBID_DVBC_KNC1_PLUS:
 742                 case SUBID_DVBT_KNC1_PLUS:
 743                         // Enable / PowerON Frontend
 744                         saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
 745                         break;
 746         }
 747
 748         switch (saa->pci->subsystem_device) {
 749
 750         case SUBID_DVBS_KNC1:
 751         case SUBID_DVBS_KNC1_PLUS:
 752         case SUBID_DVBS_TYPHOON:
 753                 fe = stv0299_attach(&typhoon_config,
 754                                     &budget_av->budget.i2c_adap);
 755                 break;
 756
 757         case SUBID_DVBS_CINERGY1200:
 758                 fe = stv0299_attach(&cinergy_1200s_config,
 759                                     &budget_av->budget.i2c_adap);
 760                 break;
 761
 762         case SUBID_DVBC_KNC1:
 763         case SUBID_DVBC_KNC1_PLUS:
 764                 fe = tda10021_attach(&philips_cu1216_config,
 765                                      &budget_av->budget.i2c_adap,
 766                                      read_pwm(budget_av));
 767                 break;
 768
 769         case SUBID_DVBT_KNC1:
 770         case SUBID_DVBT_KNC1_PLUS:
 771                 fe = tda10046_attach(&philips_tu1216_config,
 772                                      &budget_av->budget.i2c_adap);
 773                 break;
 774
 775         case SUBID_DVBC_CINERGY1200:
 776                 fe = tda10021_attach(&philips_cu1216_config,
 777                                      &budget_av->budget.i2c_adap,
 778                                      read_pwm(budget_av));
 779                 break;
 780
 781         case SUBID_DVBT_CINERGY1200:
 782                 fe = tda10046_attach(&philips_tu1216_config,
 783                                      &budget_av->budget.i2c_adap);
 784                 break;
 785         }
 786
 787         if (fe == NULL) {
 788                 printk(KERN_ERR "budget-av: A frontend driver was not found "
 789                                 "for device %04x/%04x subsystem %04x/%04x\n",
 790                        saa->pci->vendor,
 791                        saa->pci->device,
 792                        saa->pci->subsystem_vendor,
 793                        saa->pci->subsystem_device);
 794                 return;
 795         }
 796
 797         budget_av->budget.dvb_frontend = fe;
 798
 799         if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
 800                                   budget_av->budget.dvb_frontend)) {
 801                 printk(KERN_ERR "budget-av: Frontend registration failed!\n");
 802                 if (budget_av->budget.dvb_frontend->ops->release)
 803                         budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
 804                 budget_av->budget.dvb_frontend = NULL;
 805         }
 806 }
 807
 808
 809 static void budget_av_irq(struct saa7146_dev *dev, u32 * isr)
 810 {
 811         struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
 812
 813         dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av);
 814
 815         if (*isr & MASK_10)
 816                 ttpci_budget_irq10_handler(dev, isr);
 817 }
 818
 819 static int budget_av_detach(struct saa7146_dev *dev)
 820 {
 821         struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
 822         int err;
 823
 824         dprintk(2, "dev: %p\n", dev);
 825
 826         if (1 == budget_av->has_saa7113) {
 827                 saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
 828
 829                 msleep(200);
 830
 831                 saa7146_unregister_device(&budget_av->vd, dev);
 832         }
 833
 834         if (budget_av->budget.ci_present)
 835                 ciintf_deinit(budget_av);
 836
 837         if (budget_av->budget.dvb_frontend != NULL)
 838                 dvb_unregister_frontend(budget_av->budget.dvb_frontend);
 839         err = ttpci_budget_deinit(&budget_av->budget);
 840
 841         kfree(budget_av);
 842
 843         return err;
 844 }
 845
 846 static struct saa7146_ext_vv vv_data;
 847
 848 static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
 849 {
 850         struct budget_av *budget_av;
 851         u8 *mac;
 852         int err;
 853
 854         dprintk(2, "dev: %p\n", dev);
 855
 856         if (!(budget_av = kmalloc(sizeof(struct budget_av), GFP_KERNEL)))
 857                 return -ENOMEM;
 858
 859         memset(budget_av, 0, sizeof(struct budget_av));
 860
 861         budget_av->has_saa7113 = 0;
 862         budget_av->budget.ci_present = 0;
 863
 864         dev->ext_priv = budget_av;
 865
 866         if ((err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE))) {
 867                 kfree(budget_av);
 868                 return err;
 869         }
 870
 871         /* knc1 initialization */
 872         saa7146_write(dev, DD1_STREAM_B, 0x04000000);
 873         saa7146_write(dev, DD1_INIT, 0x07000600);
 874         saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
 875
 876         if (saa7113_init(budget_av) == 0) {
 877                 budget_av->has_saa7113 = 1;
 878
 879                 if (0 != saa7146_vv_init(dev, &vv_data)) {
 880                         /* fixme: proper cleanup here */
 881                         ERR(("cannot init vv subsystem.\n"));
 882                         return err;
 883                 }
 884
 885                 if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) {
 886                         /* fixme: proper cleanup here */
 887                         ERR(("cannot register capture v4l2 device.\n"));
 888                         return err;
 889                 }
 890
 891                 /* beware: this modifies dev->vv ... */
 892                 saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A,
 893                                                 SAA7146_HPS_SYNC_PORT_A);
 894
 895                 saa7113_setinput(budget_av, 0);
 896         } else {
 897                 ciintf_init(budget_av);
 898         }
 899
 900         /* fixme: find some sane values here... */
 901         saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
 902
 903         mac = budget_av->budget.dvb_adapter.proposed_mac;
 904         if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
 905                 printk(KERN_ERR "KNC1-%d: Could not read MAC from KNC1 card\n",
 906                        budget_av->budget.dvb_adapter.num);
 907                 memset(mac, 0, 6);
 908         } else {
 909                 printk(KERN_INFO "KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
 910                        budget_av->budget.dvb_adapter.num,
 911                        mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
 912         }
 913
 914         budget_av->budget.dvb_adapter.priv = budget_av;
 915         frontend_init(budget_av);
 916
 917         return 0;
 918 }
 919
 920 #define KNC1_INPUTS 2
 921 static struct v4l2_input knc1_inputs[KNC1_INPUTS] = {
 922         {0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
 923         {1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
 924 };
 925
 926 static struct saa7146_extension_ioctls ioctls[] = {
 927         {VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE},
 928         {VIDIOC_G_INPUT, SAA7146_EXCLUSIVE},
 929         {VIDIOC_S_INPUT, SAA7146_EXCLUSIVE},
 930         {0, 0}
 931 };
 932
 933 static int av_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
 934 {
 935         struct saa7146_dev *dev = fh->dev;
 936         struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
 937
 938         switch (cmd) {
 939         case VIDIOC_ENUMINPUT:{
 940                 struct v4l2_input *i = arg;
 941
 942                 dprintk(1, "VIDIOC_ENUMINPUT %d.\n", i->index);
 943                 if (i->index < 0 || i->index >= KNC1_INPUTS) {
 944                         return -EINVAL;
 945                 }
 946                 memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input));
 947                 return 0;
 948         }
 949         case VIDIOC_G_INPUT:{
 950                 int *input = (int *) arg;
 951
 952                 *input = budget_av->cur_input;
 953
 954                 dprintk(1, "VIDIOC_G_INPUT %d.\n", *input);
 955                 return 0;
 956         }
 957         case VIDIOC_S_INPUT:{
 958                 int input = *(int *) arg;
 959                 dprintk(1, "VIDIOC_S_INPUT %d.\n", input);
 960                 return saa7113_setinput(budget_av, input);
 961         }
 962         default:
 963                 return -ENOIOCTLCMD;
 964         }
 965         return 0;
 966 }
 967
 968 static struct saa7146_standard standard[] = {
 969         {.name = "PAL",.id = V4L2_STD_PAL,
 970          .v_offset = 0x17,.v_field = 288,
 971          .h_offset = 0x14,.h_pixels = 680,
 972          .v_max_out = 576,.h_max_out = 768 },
 973
 974         {.name = "NTSC",.id = V4L2_STD_NTSC,
 975          .v_offset = 0x16,.v_field = 240,
 976          .h_offset = 0x06,.h_pixels = 708,
 977          .v_max_out = 480,.h_max_out = 640, },
 978 };
 979
 980 static struct saa7146_ext_vv vv_data = {
 981         .inputs = 2,
 982         .capabilities = 0,      // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
 983         .flags = 0,
 984         .stds = &standard[0],
 985         .num_stds = sizeof(standard) / sizeof(struct saa7146_standard),
 986         .ioctls = &ioctls[0],
 987         .ioctl = av_ioctl,
 988 };
 989
 990 static struct saa7146_extension budget_extension;
 991
 992 MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
 993 MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
 994 MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
 995 MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
 996 MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
 997 MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
 998 MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
 999 MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
1000 MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
1001
1002 static struct pci_device_id pci_tbl[] = {
1003         MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
1004         MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
1005         MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
1006         MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
1007         MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
1008         MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
1009         MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
1010         MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
1011         MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
1012         MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
1013         {
1014          .vendor = 0,
1015         }
1016 };
1017
1018 MODULE_DEVICE_TABLE(pci, pci_tbl);
1019
1020 static struct saa7146_extension budget_extension = {
1021         .name = "budget dvb /w video in\0",
1022         .pci_tbl = pci_tbl,
1023
1024         .module = THIS_MODULE,
1025         .attach = budget_av_attach,
1026         .detach = budget_av_detach,
1027
1028         .irq_mask = MASK_10,
1029         .irq_func = budget_av_irq,
1030 };
1031
1032 static int __init budget_av_init(void)
1033 {
1034         return saa7146_register_extension(&budget_extension);
1035 }
1036
1037 static void __exit budget_av_exit(void)
1038 {
1039         saa7146_unregister_extension(&budget_extension);
1040 }
1041
1042 module_init(budget_av_init);
1043 module_exit(budget_av_exit);
1044
1045 MODULE_LICENSE("GPL");
1046 MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
1047 MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
1048                    "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");