2 $Id: bttv-cards.c,v 1.42 2005/01/13 17:22:33 kraxel Exp $
6 this file has configuration informations - card-specific stuff
7 like the big tvcards array for the most part
9 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
10 & Marcus Metzler (mocm@thp.uni-koeln.de)
11 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
13 This program is free software; you can redistribute it and/or modify
14 it under the terms of the GNU General Public License as published by
15 the Free Software Foundation; either version 2 of the License, or
16 (at your option) any later version.
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
23 You should have received a copy of the GNU General Public License
24 along with this program; if not, write to the Free Software
25 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
29 #include <linux/config.h>
30 #include <linux/delay.h>
31 #include <linux/module.h>
32 #include <linux/moduleparam.h>
33 #include <linux/kmod.h>
34 #include <linux/init.h>
35 #include <linux/pci.h>
36 #include <linux/vmalloc.h>
37 #include <linux/firmware.h>
42 #if 0 /* not working yet */
47 static void boot_msp34xx(struct bttv *btv, int pin);
48 static void boot_bt832(struct bttv *btv);
49 static void hauppauge_eeprom(struct bttv *btv);
50 static void avermedia_eeprom(struct bttv *btv);
51 static void osprey_eeprom(struct bttv *btv);
52 static void modtec_eeprom(struct bttv *btv);
53 static void init_PXC200(struct bttv *btv);
55 static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
56 static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
57 static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
59 static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
61 static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
62 static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
63 static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
64 static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
65 static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
66 static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
67 static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
68 static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
69 static void rv605_muxsel(struct bttv *btv, unsigned int input);
70 static void eagle_muxsel(struct bttv *btv, unsigned int input);
71 static void xguard_muxsel(struct bttv *btv, unsigned int input);
72 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
73 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
75 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
77 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
78 static void picolo_tetra_init(struct bttv *btv);
80 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
81 static void tibetCS16_init(struct bttv *btv);
83 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
84 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
86 static int terratec_active_radio_upgrade(struct bttv *btv);
87 static int tea5757_read(struct bttv *btv);
88 static int tea5757_write(struct bttv *btv, int value);
89 static void identify_by_eeprom(struct bttv *btv,
90 unsigned char eeprom_data[256]);
91 static int __devinit pvr_boot(struct bttv *btv);
93 /* config variables */
94 static unsigned int triton1=0;
95 static unsigned int vsfx=0;
96 static unsigned int latency = UNSET;
97 static unsigned int no_overlay=-1;
99 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
100 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
101 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
102 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
103 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
105 static unsigned int autoload = 1;
107 static unsigned int autoload = 0;
109 static unsigned int gpiomask = UNSET;
110 static unsigned int audioall = UNSET;
111 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
114 module_param(triton1, int, 0444);
115 module_param(vsfx, int, 0444);
116 module_param(no_overlay, int, 0444);
117 module_param(latency, int, 0444);
118 module_param(gpiomask, int, 0444);
119 module_param(audioall, int, 0444);
120 module_param(autoload, int, 0444);
122 module_param_array(card, int, NULL, 0444);
123 module_param_array(pll, int, NULL, 0444);
124 module_param_array(tuner, int, NULL, 0444);
125 module_param_array(svhs, int, NULL, 0444);
126 module_param_array(remote, int, NULL, 0444);
127 module_param_array(audiomux, int, NULL, 0444);
129 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
130 "[enable bug compatibility for triton1 + others]");
131 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
132 "[yet another chipset flaw workaround]");
133 MODULE_PARM_DESC(latency,"pci latency timer");
134 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
135 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
136 MODULE_PARM_DESC(tuner,"specify installed tuner type");
137 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
139 /* ----------------------------------------------------------------------- */
140 /* list of card IDs for bt878+ cards */
146 } cards[] __devinitdata = {
147 { 0x13eb0070, BTTV_HAUPPAUGE878, "Hauppauge WinTV" },
148 { 0x39000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV-D" },
149 { 0x45000070, BTTV_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
150 { 0xff000070, BTTV_OSPREY1x0, "Osprey-100" },
151 { 0xff010070, BTTV_OSPREY2x0_SVID,"Osprey-200" },
152 { 0xff020070, BTTV_OSPREY500, "Osprey-500" },
153 { 0xff030070, BTTV_OSPREY2000, "Osprey-2000" },
154 { 0xff040070, BTTV_OSPREY540, "Osprey-540" },
156 { 0x00011002, BTTV_ATI_TVWONDER, "ATI TV Wonder" },
157 { 0x00031002, BTTV_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
159 { 0x6606107d, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
160 { 0x6607107d, BTTV_WINFASTVC100, "Leadtek WinFast VC 100" },
161 { 0x6609107d, BTTV_WINFAST2000, "Leadtek TV 2000 XP" },
162 { 0x263610b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
163 { 0x264510b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
164 { 0x402010fc, BTTV_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
165 { 0x405010fc, BTTV_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
166 { 0x407010fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
167 { 0xd01810fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
169 { 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
170 // some cards ship with byteswapped IDs ...
171 { 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
172 { 0xff00bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
174 { 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
175 { 0x263710b4, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
176 { 0x3060121a, BTTV_STB2, "3Dfx VoodooTV 100/ STB OEM" },
178 { 0x3000144f, BTTV_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
179 { 0xa005144f, BTTV_MAGICTVIEW063, "CPH06X TView99-Card" },
180 { 0x3002144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
181 { 0x3005144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
182 { 0x5000144f, BTTV_MAGICTVIEW061, "Askey CPH050" },
183 { 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" },
184 { 0x300214ff, BTTV_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
186 { 0x00011461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
187 { 0x00021461, BTTV_AVERMEDIA98, "AVermedia TVCapture 98" },
188 { 0x00031461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
189 { 0x00041461, BTTV_AVERMEDIA98, "AVerMedia TVCapture 98" },
190 { 0x03001461, BTTV_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
192 { 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
193 { 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
194 { 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
195 { 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
197 { 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" },
198 { 0x1127153b, BTTV_TERRATV, "Terratec TV+ (V1.05)" },
199 // clashes with FlyVideo
200 //{ 0x18521852, BTTV_TERRATV, "Terratec TV+ (V1.10)" },
201 { 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue (LR102)" },
202 { 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, // LR102
203 { 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" }, // ??
204 { 0xff3b153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, // ??
206 { 0x400015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
207 { 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
208 { 0x400d15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
209 { 0x401015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
210 { 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
212 { 0x1430aa00, BTTV_PV143, "Provideo PV143A" },
213 { 0x1431aa00, BTTV_PV143, "Provideo PV143B" },
214 { 0x1432aa00, BTTV_PV143, "Provideo PV143C" },
215 { 0x1433aa00, BTTV_PV143, "Provideo PV143D" },
216 { 0x1433aa03, BTTV_PV143, "Security Eyes" },
218 { 0x1460aa00, BTTV_PV150, "Provideo PV150A-1" },
219 { 0x1461aa01, BTTV_PV150, "Provideo PV150A-2" },
220 { 0x1462aa02, BTTV_PV150, "Provideo PV150A-3" },
221 { 0x1463aa03, BTTV_PV150, "Provideo PV150A-4" },
223 { 0x1464aa04, BTTV_PV150, "Provideo PV150B-1" },
224 { 0x1465aa05, BTTV_PV150, "Provideo PV150B-2" },
225 { 0x1466aa06, BTTV_PV150, "Provideo PV150B-3" },
226 { 0x1467aa07, BTTV_PV150, "Provideo PV150B-4" },
228 { 0xa132ff00, BTTV_IVC100, "IVC-100" },
229 { 0xa1550000, BTTV_IVC200, "IVC-200" },
230 { 0xa1550001, BTTV_IVC200, "IVC-200" },
231 { 0xa1550002, BTTV_IVC200, "IVC-200" },
232 { 0xa1550003, BTTV_IVC200, "IVC-200" },
233 { 0xa1550100, BTTV_IVC200, "IVC-200G" },
234 { 0xa1550101, BTTV_IVC200, "IVC-200G" },
235 { 0xa1550102, BTTV_IVC200, "IVC-200G" },
236 { 0xa1550103, BTTV_IVC200, "IVC-200G" },
237 { 0xa182ff00, BTTV_IVC120, "IVC-120G" },
238 { 0xa182ff01, BTTV_IVC120, "IVC-120G" },
239 { 0xa182ff02, BTTV_IVC120, "IVC-120G" },
240 { 0xa182ff03, BTTV_IVC120, "IVC-120G" },
241 { 0xa182ff04, BTTV_IVC120, "IVC-120G" },
242 { 0xa182ff05, BTTV_IVC120, "IVC-120G" },
243 { 0xa182ff06, BTTV_IVC120, "IVC-120G" },
244 { 0xa182ff07, BTTV_IVC120, "IVC-120G" },
245 { 0xa182ff08, BTTV_IVC120, "IVC-120G" },
246 { 0xa182ff09, BTTV_IVC120, "IVC-120G" },
247 { 0xa182ff0a, BTTV_IVC120, "IVC-120G" },
248 { 0xa182ff0b, BTTV_IVC120, "IVC-120G" },
249 { 0xa182ff0c, BTTV_IVC120, "IVC-120G" },
250 { 0xa182ff0d, BTTV_IVC120, "IVC-120G" },
251 { 0xa182ff0e, BTTV_IVC120, "IVC-120G" },
252 { 0xa182ff0f, BTTV_IVC120, "IVC-120G" },
254 { 0x41424344, BTTV_GRANDTEC, "GrandTec Multi Capture" },
255 { 0x01020304, BTTV_XGUARD, "Grandtec Grand X-Guard" },
257 { 0x18501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
258 { 0xa0501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
259 { 0x18511851, BTTV_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
260 { 0x18521852, BTTV_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
261 { 0x41a0a051, BTTV_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
262 { 0x18501f7f, BTTV_FLYVIDEO_98, "Lifeview Flyvideo 98" },
264 { 0x010115cb, BTTV_GMV1, "AG GMV1" },
265 { 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
267 { 0x10b42636, BTTV_HAUPPAUGE878, "STB ???" },
268 { 0x217d6606, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
269 { 0xfff6f6ff, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
270 { 0x03116000, BTTV_SENSORAY311, "Sensoray 311" },
271 { 0x00790e11, BTTV_WINDVR, "Canopus WinDVR PCI" },
272 { 0xa0fca1a0, BTTV_ZOLTRIX, "Face to Face Tvmax" },
273 { 0x20007063, BTTV_PC_HDTV, "pcHDTV HD-2000 TV"},
274 { 0x82b2aa6a, BTTV_SIMUS_GVC1100, "SIMUS GVC1100" },
275 { 0x146caa0c, BTTV_PV951, "ituner spectra8" },
276 { 0x200a1295, BTTV_PXC200, "ImageNation PXC200A" },
278 { 0x40111554, BTTV_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
279 { 0x17de0a01, BTTV_KWORLD, "Mecer TV/FM/Video Tuner" },
281 { 0x01051805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
282 { 0x01061805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
283 { 0x01071805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
284 { 0x01081805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
286 // likely broken, vendor id doesn't match the other magic views ...
287 //{ 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" },
289 // DVB cards (using pci function .1 for mpeg data xfer)
290 { 0x01010071, BTTV_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
291 { 0x07611461, BTTV_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
292 { 0x001c11bd, BTTV_PINNACLESAT, "Pinnacle PCTV Sat" },
293 { 0x002611bd, BTTV_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
294 { 0x00011822, BTTV_TWINHAN_DST, "Twinhan VisionPlus DVB-T" },
295 { 0xfc00270f, BTTV_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
296 { 0x07711461, BTTV_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
297 { 0xdb1018ac, BTTV_DVICO_DVBT_LITE, "DVICO FusionHDTV DVB-T Lite" },
302 /* ----------------------------------------------------------------------- */
303 /* array with description for bt848 / bt878 tv/grabber cards */
305 struct tvcard bttv_tvcards[] = {
307 /* ---- card 0x00 ---------------------------------- */
308 .name = " *** UNKNOWN/GENERIC *** ",
313 .muxsel = { 2, 3, 1, 0},
322 .muxsel = { 2, 3, 1, 1},
323 .audiomux = { 2, 0, 0, 0, 10},
327 .name = "Hauppauge (bt848)",
333 .muxsel = { 2, 3, 1, 1},
334 .audiomux = { 0, 1, 2, 3, 4},
338 .name = "STB, Gateway P/N 6000699 (bt848)",
344 .muxsel = { 2, 3, 1, 1},
345 .audiomux = { 4, 0, 2, 3, 1},
348 .tuner_type = TUNER_PHILIPS_NTSC,
353 /* ---- card 0x04 ---------------------------------- */
354 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
360 .muxsel = { 2, 3, 1, 1},
365 .name = "Diamond DTV2000",
371 .muxsel = { 2, 3, 1, 0},
372 .audiomux = { 0, 1, 0, 1, 3},
376 .name = "AVerMedia TVPhone",
381 .muxsel = { 2, 3, 1, 1},
383 .audiomux = { 0x0c, 0x04, 0x08, 0x04, 0},
384 /* 0x04 for some cards ?? */
387 .audio_hook = avermedia_tvphone_audio,
390 .name = "MATRIX-Vision MV-Delta",
396 .muxsel = { 2, 3, 1, 0, 0},
402 /* ---- card 0x08 ---------------------------------- */
403 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
409 .muxsel = { 2, 3, 1, 1},
410 .audiomux = { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
415 .name = "IMS/IXmicro TurboTV",
421 .muxsel = { 2, 3, 1, 1},
422 .audiomux = { 1, 1, 2, 3, 0},
425 .tuner_type = TUNER_TEMIC_PAL,
427 .name = "Hauppauge (bt878)",
432 .gpiomask = 0x0f, /* old: 7 */
433 .muxsel = { 2, 0, 1, 1},
434 .audiomux = { 0, 1, 2, 3, 4},
439 .name = "MIRO PCTV pro",
445 .muxsel = { 2, 3, 1, 1},
446 .audiomux = { 0x20001,0x10001, 0, 0,10},
451 /* ---- card 0x0c ---------------------------------- */
452 .name = "ADS Technologies Channel Surfer TV (bt848)",
458 .muxsel = { 2, 3, 1, 1},
459 .audiomux = { 13, 14, 11, 7, 0, 0},
463 .name = "AVerMedia TVCapture 98",
469 .muxsel = { 2, 3, 1, 1},
470 .audiomux = { 13, 14, 11, 7, 0, 0},
474 .tuner_type = TUNER_PHILIPS_PAL,
475 .audio_hook = avermedia_tv_stereo_audio,
477 .name = "Aimslab Video Highway Xtreme (VHX)",
483 .muxsel = { 2, 3, 1, 1},
484 .audiomux = { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
489 .name = "Zoltrix TV-Max",
495 .muxsel = { 2, 3, 1, 1},
496 .audiomux = {0 , 0, 1 , 0, 10},
501 /* ---- card 0x10 ---------------------------------- */
502 .name = "Prolink Pixelview PlayTV (bt878)",
507 .gpiomask = 0x01fe00,
508 .muxsel = { 2, 3, 1, 1},
511 .audiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
513 // 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru>
514 .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
520 .name = "Leadtek WinView 601",
525 .gpiomask = 0x8300f8,
526 .muxsel = { 2, 3, 1, 1,0},
527 .audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
530 .audio_hook = winview_audio,
533 .name = "AVEC Intercapture",
539 .muxsel = {2, 3, 1, 1},
540 .audiomux = {1, 0, 0, 0, 0},
544 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
549 .gpiomask = 0x8dff00,
550 .muxsel = { 2, 3, 1, 1},
556 /* ---- card 0x14 ---------------------------------- */
557 .name = "CEI Raffles Card",
562 .muxsel = {2, 3, 1, 1},
565 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
567 .audio_inputs = 2, // tuner, line in
571 .muxsel = { 2, 3, 1, 1},
572 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
574 .tuner_type = TUNER_PHILIPS_PAL_I,
576 .name = "Askey CPH050/ Phoebe Tv Master + FM",
582 .muxsel = { 2, 3, 1, 1},
583 .audiomux = {0, 1, 0x800, 0x400, 0xc00, 0},
588 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
594 .muxsel = { 2, 3, -1 },
595 .digital_mode = DIGITAL_MODE_CAMERA,
596 .audiomux = { 0, 0, 0, 0, 0 },
599 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
602 /* ---- card 0x18 ---------------------------------- */
603 .name = "Askey CPH05X/06X (bt878) [many vendors]",
609 .muxsel = { 2, 3, 1, 1},
610 .audiomux = {0x400, 0x400, 0x400, 0x400, 0xc00},
616 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
621 .gpiomask = 0x1f0fff,
622 .muxsel = { 2, 3, 1, 1},
623 .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000},
625 .tuner_type = TUNER_PHILIPS_PAL,
626 .audio_hook = terratv_audio,
628 .name = "Hauppauge WinCam newer (bt878)",
634 .muxsel = { 2, 0, 1, 1},
635 .audiomux = { 0, 1, 2, 3, 4},
639 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
645 .muxsel = { 2, 3, 1, 1},
646 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
648 .tuner_type = TUNER_PHILIPS_SECAM,
651 /* ---- card 0x1c ---------------------------------- */
652 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
657 .gpiomask = 0x1f0fff,
658 .muxsel = { 2, 3, 1, 1},
659 .audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
661 .tuner_type = TUNER_PHILIPS_PAL,
662 .audio_hook = terratv_audio,
664 External 20 pin connector (for Active Radio Upgrade board)
670 gpio05: om5610-stereo
674 gpio09+10: nIOR, nSEL ?? (bt878)
678 gpio16: u2-A0 (1st 4052bt)
681 gpio19: u4-A0 (2nd 4052)
685 00000 : Cdrom (internal audio input)
686 10000 : ext. Video audio input
695 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
696 .name = "Imagenation PXC200",
700 .svhs = 1, /* was: 4 */
702 .muxsel = { 2, 3, 1, 0, 0},
706 .muxsel_hook = PXC200_muxsel,
709 .name = "Lifeview FlyVideo 98 LR50",
714 .gpiomask = 0x1800, //0x8dfe00
715 .muxsel = { 2, 3, 1, 1},
716 .audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
720 .name = "Formac iProTV, Formac ProTV I (bt848)",
726 .muxsel = { 2, 3, 1, 1},
727 .audiomux = { 1, 0, 0, 0, 0 },
729 .tuner_type = TUNER_PHILIPS_PAL,
732 /* ---- card 0x20 ---------------------------------- */
733 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
739 .muxsel = { 2, 3, 1, 1},
744 .name = "Terratec TerraTValue Version Bt878",
749 .gpiomask = 0xffff00,
750 .muxsel = { 2, 3, 1, 1},
751 .audiomux = { 0x500, 0, 0x300, 0x900, 0x900},
754 .tuner_type = TUNER_PHILIPS_PAL,
756 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
761 .muxsel = { 2, 3, 1, 1, 0}, // TV, CVid, SVid, CVid over SVid connector
763 .gpiomask = 0xc33000,
764 .audiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000 },
766 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
767 .gpiomask = 0xb33000,
768 .audiomux = { 0x122000,0x1000,0x0000,0x620000,0x800000 },
770 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
771 gpio23 -- hef4052:nEnable (0x800000)
774 0x0000: external audio
778 Note: There exists another variant "Winfast 2000" with tv stereo !?
779 Note: eeprom only contains FF and pci subsystem id 107d:6606
784 .tuner_type = 5, // default for now, gpio reads BFFF06 for Pal bg+dk
785 .audio_hook = winfast2000_audio,
788 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
794 .muxsel = { 2, 3, 1, 1},
795 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
800 /* ---- card 0x24 ---------------------------------- */
801 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
807 .muxsel = { 2, 3, 1, 1},
808 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
813 .name = "Prolink PixelView PlayTV pro",
819 .muxsel = { 2, 3, 1, 1 },
820 .audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
825 .name = "Askey CPH06X TView99",
830 .gpiomask = 0x551e00,
831 .muxsel = { 2, 3, 1, 0},
832 .audiomux = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
838 .name = "Pinnacle PCTV Studio/Rave",
843 .gpiomask = 0x03000F,
844 .muxsel = { 2, 3, 1, 1},
845 .audiomux = { 2, 0xd0001, 0, 0, 1},
851 /* ---- card 0x28 ---------------------------------- */
852 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
858 .muxsel = { 2, 3, 1, 1},
859 .audiomux = { 4, 0, 2, 3, 1},
862 .tuner_type = TUNER_PHILIPS_NTSC,
866 .name = "AVerMedia TVPhone 98",
872 .muxsel = { 2, 3, 1, 1},
873 .audiomux = { 13, 4, 11, 7, 0, 0},
878 .audio_hook = avermedia_tvphone_audio,
880 .name = "ProVideo PV951", /* pic16c54 */
886 .muxsel = { 2, 3, 1, 1},
887 .audiomux = { 0, 0, 0, 0, 0},
893 .name = "Little OnAir TV",
899 .muxsel = {2, 3, 1, 1},
900 .audiomux = {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
905 /* ---- card 0x2c ---------------------------------- */
906 .name = "Sigma TVII-FM",
912 .muxsel = {2, 3, 1, 1},
913 .audiomux = {1, 1, 0, 2, 3},
918 .name = "MATRIX-Vision MV-Delta 2",
924 .muxsel = { 2, 3, 1, 0, 0},
930 .name = "Zoltrix Genie TV/FM",
935 .gpiomask = 0xbcf03f,
936 .muxsel = { 2, 3, 1, 1},
937 .audiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
942 .name = "Terratec TV/Radio+",
948 .muxsel = { 2, 3, 1, 1},
949 .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
957 /* ---- card 0x30 ---------------------------------- */
958 .name = "Askey CPH03x/ Dynalink Magic TView",
964 .muxsel = { 2, 3, 1, 1},
965 .audiomux = {2,0,0,0,1},
970 .name = "IODATA GV-BCTV3/PCI",
975 .gpiomask = 0x010f00,
976 .muxsel = {2, 3, 0, 0},
977 .audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
980 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
981 .audio_hook = gvbctv3pci_audio,
983 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
988 .gpiomask = 0xAA0000,
989 .muxsel = { 2,3,1,1,-1 },
990 .digital_mode = DIGITAL_MODE_CAMERA,
991 .audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
994 .tuner_type = TUNER_PHILIPS_PAL_I,
996 /* GPIO wiring: (different from Rev.4C !)
997 GPIO17: U4.A0 (first hef4052bt)
999 GPIO20: U5.A1 (second hef4052bt)
1001 GPIO22: BT832 Reset Line
1002 GPIO23: A5,A0, U5,nEN
1003 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1006 .name = "Eagle Wireless Capricorn2 (bt878A)",
1012 .muxsel = { 2, 0, 1, 1},
1013 .audiomux = { 0, 1, 2, 3, 4},
1015 .tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */,
1018 /* ---- card 0x34 ---------------------------------- */
1019 /* David Härdeman <david@2gen.com> */
1020 .name = "Pinnacle PCTV Studio Pro",
1025 .gpiomask = 0x03000F,
1026 .muxsel = { 2, 3, 1, 1},
1027 .audiomux = { 1, 0xd0001, 0, 0, 10},
1028 /* sound path (5 sources):
1029 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1032 2= Mono TV sound from Tuner
1034 MUX2 (mask 0x30000):
1036 1= FM stereo Radio from Tuner */
1041 /* Claas Langbehn <claas@bigfoot.com>,
1042 Sven Grothklags <sven@upb.de> */
1043 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1049 .muxsel = { 2, 3, 1, 1},
1050 .audiomux = { 0, 0, 0x10, 8, 4 },
1053 .tuner_type = TUNER_PHILIPS_PAL,
1056 /* Tim Röstermundt <rosterm@uni-muenster.de>
1057 in de.comp.os.unix.linux.hardware:
1058 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1059 audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1060 options tuner type=5 */
1061 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1067 .muxsel = { 2, 3, 1, 1},
1068 .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
1069 /* For cards with tda9820/tda9821:
1070 0x0000: Tuner normal stereo
1071 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1072 0x0880: Tuner A2 stereo */
1076 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1077 old Easy TV BT848 version (model CPH031) */
1078 .name = "Askey CPH031/ BESTBUY Easy TV",
1084 .muxsel = { 2, 3, 1, 0},
1085 .audiomux = { 2, 0, 0, 0, 10},
1088 .tuner_type = TUNER_TEMIC_PAL,
1091 /* ---- card 0x38 ---------------------------------- */
1092 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1093 .name = "Lifeview FlyVideo 98FM LR50",
1099 .muxsel = { 2, 3, 1, 1},
1100 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
1104 /* This is the ultimate cheapo capture card
1105 * just a BT848A on a small PCB!
1106 * Steve Hosgood <steve@equiinet.com> */
1107 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1120 /* Daniel Herrington <daniel.herrington@home.com> */
1121 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1127 .muxsel = { 2, 3, 1, 1},
1128 .audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
1131 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1133 /* Matti Mottus <mottus@physic.ut.ee> */
1134 .name = "Askey CPH03x TV Capturer",
1139 .gpiomask = 0x03000F,
1140 .muxsel = { 2, 3, 1, 0},
1141 .audiomux = { 2,0,0,0,1 },
1146 /* ---- card 0x3c ---------------------------------- */
1147 /* Philip Blundell <philb@gnu.org> */
1148 .name = "Modular Technology MM100PCTV",
1154 .muxsel = { 2, 3, 1, 1},
1155 .audiomux = { 2, 0, 0, 1, 8},
1157 .tuner_type = TUNER_TEMIC_PAL,
1160 /* Adrian Cox <adrian@humboldt.co.uk */
1161 .name = "AG Electronics GMV1",
1174 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1175 new Easy TV BT878 version (model CPH061)
1176 special thanks to Informatica Mieres for providing the card */
1177 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1183 .muxsel = { 2, 3, 1, 0},
1184 .audiomux = { 1, 0, 4, 4, 9},
1187 .tuner_type = TUNER_PHILIPS_PAL,
1189 /* Lukas Gebauer <geby@volny.cz> */
1190 .name = "ATI TV-Wonder",
1196 .muxsel = { 2, 3, 1, 0 },
1197 .audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe},
1199 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1202 /* ---- card 0x40 ---------------------------------- */
1203 /* Lukas Gebauer <geby@volny.cz> */
1204 .name = "ATI TV-Wonder VE",
1210 .muxsel = { 2, 3, 0, 1},
1211 .audiomux = { 0, 0, 1, 0, 0},
1214 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1216 /* DeeJay <deejay@westel900.net (2000S) */
1217 .name = "Lifeview FlyVideo 2000S LR90",
1223 .muxsel = { 2, 3, 0, 1},
1224 /* Radio changed from 1e80 to 0x800 to make
1225 FlyVideo2000S in .hu happy (gm)*/
1226 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1227 .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
1228 .audio_hook = fv2000s_audio,
1235 .name = "Terratec TValueRadio",
1240 .gpiomask = 0xffff00,
1241 .muxsel = { 2, 3, 1, 1},
1242 .audiomux = { 0x500, 0x500, 0x300, 0x900, 0x900},
1245 .tuner_type = TUNER_PHILIPS_PAL,
1248 /* TANAKA Kei <peg00625@nifty.com> */
1249 .name = "IODATA GV-BCTV4/PCI",
1254 .gpiomask = 0x010f00,
1255 .muxsel = {2, 3, 0, 0},
1256 .audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
1259 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1260 .audio_hook = gvbctv3pci_audio,
1263 /* ---- card 0x44 ---------------------------------- */
1264 .name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
1265 // try "insmod msp3400 simple=0" if you have
1266 // sound problems with this card.
1271 .gpiomask = 0x4f8a00,
1272 // 0x100000: 1=MSP enabled (0=disable again)
1273 // 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC)
1274 .audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
1275 // tvtuner, radio, external,internal, mute, stereo
1276 /* tuner, Composit, SVid, Composit-on-Svid-adapter*/
1277 .muxsel = { 2, 3 ,0 ,1},
1278 .tuner_type = TUNER_MT2032,
1282 /* Philip Blundell <pb@nexus.co.uk> */
1283 .name = "Active Imaging AIMMS",
1292 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1293 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1299 .muxsel = { 2, 3, 1, 1},
1300 .audiomux = { 0, 0, 11, 7, 13, 0}, // TV and Radio with same GPIO !
1306 GPIO0: U4.A0 (hef4052bt)
1308 GPIO2: U4.A1 (second hef4052bt)
1309 GPIO3: U4.nEN, U5.A0, A5.nEN
1313 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1318 .muxsel = { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS
1323 /* ---- card 0x48 ---------------------------------- */
1324 /* Dariusz Kowalewski <darekk@automex.pl> */
1325 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1331 .muxsel = { 2, 3, 1, 1 },
1332 .audiomux = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
1338 .audio_hook = pvbt878p9b_audio, // Note: not all cards have stereo
1339 .has_radio = 1, // Note: not all cards have radio
1346 GPIO20,22,23: R30,R29,R28
1349 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1350 /* you must jumper JP5 for the card to work */
1351 .name = "Sensoray 311",
1357 .muxsel = { 2, 3, 1, 0, 0},
1362 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1363 .name = "RemoteVision MX (RV605)",
1369 .gpiomask2 = 0x07ff,
1370 .muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1371 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1375 .muxsel_hook = rv605_muxsel,
1377 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1382 .gpiomask = 0x1C800F, // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset
1383 .muxsel = { 2, 1, 1, },
1384 .audiomux = { 0, 1, 2, 2, 4 },
1386 .tuner_type = TUNER_PHILIPS_PAL,
1391 /* ---- card 0x4c ---------------------------------- */
1392 /* Masaki Suzuki <masaki@btree.org> */
1393 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1398 .gpiomask = 0x140007,
1399 .muxsel = { 2, 3, 1, 1 },
1400 .audiomux = { 0, 1, 2, 3, 4, 0 },
1401 .tuner_type = TUNER_PHILIPS_NTSC,
1402 .audio_hook = windvr_audio,
1404 .name = "GrandTec Multi Capture Card (Bt878)",
1410 .muxsel = { 2, 3, 1, 0 },
1417 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1423 .muxsel = { 2, 3, 1, 1 }, // Tuner, SVid, SVHS, SVid to SVHS connector
1424 .audiomux = { 0 ,0 ,4, 4,4,4},// Yes, this tuner uses the same audio output for TV and FM radio!
1425 // This card lacks external Audio In, so we mute it on Ext. & Int.
1426 // The PCB can take a sbx1637/sbx1673, wiring unknown.
1427 // This card lacks PCI subsystem ID, sigh.
1428 // audiomux=1: lower volume, 2+3: mute
1429 // btwincap uses 0x80000/0x80003
1433 .tuner_type = 5, // Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1434 // radio signal strength indicators work fine.
1437 GPIO0,1: HEF4052 A0,A1
1438 GPIO2: HEF4052 nENABLE
1440 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1444 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1446 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1447 .name = "DSP Design TCVIDEO",
1450 .muxsel = { 2, 3, 1, 0},
1455 /* ---- card 0x50 ---------------------------------- */
1456 .name = "Hauppauge WinTV PVR",
1461 .muxsel = { 2, 0, 1, 1},
1469 .name = "IODATA GV-BCTV5/PCI",
1474 .gpiomask = 0x0f0f80,
1475 .muxsel = {2, 3, 1, 0},
1476 .audiomux = {0x030000, 0x010000, 0, 0, 0x020000, 0},
1479 .tuner_type = TUNER_PHILIPS_NTSC_M,
1480 .audio_hook = gvbctv5pci_audio,
1483 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1484 .video_inputs = 4, /* id-inputs-clock */
1488 .muxsel = { 3, 2, 0, 1 },
1495 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1500 .muxsel = { 2, 3, 1 },
1508 /* ---- card 0x54 ---------------------------------- */
1509 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1521 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1533 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1545 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1558 /* ---- card 0x58 ---------------------------------- */
1559 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1571 .name = "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */
1583 .name = "Osprey 500", /* 500 */
1595 .name = "Osprey 540", /* 540 */
1599 #if 0 /* TODO ... */
1600 .svhs = OSPREY540_SVID_ANALOG,
1601 .muxsel = { [OSPREY540_COMP_ANALOG] = 2,
1602 [OSPREY540_SVID_ANALOG] = 3, },
1609 #if 0 /* TODO ... */
1610 .muxsel_hook = osprey_540_muxsel,
1611 .picture_hook = osprey_540_set_picture,
1615 /* ---- card 0x5C ---------------------------------- */
1616 .name = "Osprey 2000", /* 2000 */
1626 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1628 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1629 .name = "IDS Eagle",
1636 .muxsel = { 0, 1, 2, 3 },
1637 .muxsel_hook = eagle_muxsel,
1642 .name = "Pinnacle PCTV Sat",
1652 .audiomux = { 0, 0, 0, 0, 1 },
1653 .muxsel = { 3, 0, 1, 2},
1659 .name = "Formac ProTV II (bt878)",
1665 // TV, Comp1, Composite over SVID con, SVID
1666 .muxsel = { 2, 3, 1, 1},
1667 .audiomux = { 2, 2, 0, 0, 0 },
1670 .tuner_type = TUNER_PHILIPS_PAL,
1672 GPIO=0x00,0x01,0x03: mute (?)
1673 0x02: both TV and radio (tuner: FM1216/I)
1674 The card has onboard audio connectors labeled "cdrom" and "board",
1675 not soldered here, though unknown wiring.
1676 Card lacks: external audio in, pci subsystem id.
1680 /* ---- card 0x60 ---------------------------------- */
1687 .muxsel = { 2, 3, 1, 1},
1688 .audiomux = { 0, 1, 2, 3, 4},
1693 .name = "Euresys Picolo",
1702 .muxsel = { 2, 0, 1},
1705 /* Luc Van Hoeylandt <luc@e-magic.be> */
1706 .name = "ProVideo PV150", /* 0x4f */
1719 /* Hiroshi Takekawa <sian@big.or.jp> */
1720 /* This card lacks subsystem ID */
1721 .name = "AD-TVK503", /* 0x63 */
1726 .gpiomask = 0x001e8007,
1727 .muxsel = { 2, 3, 1, 0 },
1728 /* Tuner, Radio, external, internal, off, on */
1729 .audiomux = { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 },
1734 .audio_hook = adtvk503_audio,
1737 /* ---- card 0x64 ---------------------------------- */
1738 .name = "Hercules Smart TV Stereo",
1744 .muxsel = { 2, 3, 1, 1 },
1750 - card lacks subsystem ID
1751 - stereo variant w/ daughter board with tda9874a @0xb0
1753 always from tda9874 independent of GPIO (?)
1754 external line in: unknown
1755 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1756 hef4053 (instead 4052) for unknown function
1759 .name = "Pace TV & Radio Card",
1764 .muxsel = { 2, 3, 1, 1}, // Tuner, CVid, SVid, CVid over SVid connector
1771 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1772 only internal line out: (4pin header) RGGL
1773 Radio must be decoded by msp3410d (not routed through)*/
1774 // .digital_mode = DIGITAL_MODE_CAMERA, // todo!
1776 /* Chris Willing <chris@vislab.usyd.edu.au> */
1787 .name = "Grand X-Guard / Trust 814PCI",
1794 .muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
1795 .muxsel_hook = xguard_muxsel,
1802 /* ---- card 0x68 ---------------------------------- */
1803 .name = "Nebula Electronics DigiTV",
1807 .muxsel = { 2, 3, 1, 0},
1816 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1817 .name = "ProVideo PV143",
1823 .muxsel = { 2, 3, 1, 0 },
1830 /* M.Klahr@phytec.de */
1831 .name = "PHYTEC VD-009-X1 MiniDIN (bt878)",
1834 .tuner = -1, /* card has no tuner */
1837 .muxsel = { 2, 3, 1, 0},
1838 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1843 .name = "PHYTEC VD-009-X1 Combi (bt878)",
1846 .tuner = -1, /* card has no tuner */
1849 .muxsel = { 2, 3, 1, 1},
1850 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1856 /* ---- card 0x6c ---------------------------------- */
1857 .name = "PHYTEC VD-009 MiniDIN (bt878)",
1860 .tuner = -1, /* card has no tuner */
1863 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
1864 via the upper nibble of muxsel. here: used for
1865 xternal video-mux */
1866 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
1867 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1872 .name = "PHYTEC VD-009 Combi (bt878)",
1875 .tuner = -1, /* card has no tuner */
1878 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
1879 via the upper nibble of muxsel. here: used for
1880 xternal video-mux */
1881 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
1882 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1894 .muxsel = { 2, 3, 1, 0 },
1897 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
1900 .audio_inputs = 0, /* card has no audio */
1901 .tuner = -1, /* card has no tuner */
1903 .svhs = -1, /* card has no svhs */
1909 .muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
1910 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
1911 .muxsel_hook = ivc120_muxsel,
1915 /* ---- card 0x70 ---------------------------------- */
1916 .name = "pcHDTV HD-2000 TV",
1921 .muxsel = { 2, 3, 1, 0},
1922 .tuner_type = TUNER_PHILIPS_ATSC,
1924 .name = "Twinhan DST + clones",
1928 .tuner_type = TUNER_ABSENT,
1932 .name = "Winfast VC100",
1936 .tuner = -1, // no tuner
1937 .muxsel = { 3, 1, 1, 3}, // Vid In, SVid In, Vid over SVid in connector
1941 .tuner_type = TUNER_ABSENT,
1945 .name = "Teppro TEV-560/InterVision IV-560",
1951 .muxsel = { 2, 3, 1, 1},
1952 .audiomux = { 1, 1, 1, 1, 0},
1954 .tuner_type = TUNER_PHILIPS_PAL,
1958 /* ---- card 0x74 ---------------------------------- */
1959 .name = "SIMUS GVC1100",
1966 .muxsel = { 2, 2, 2, 2},
1968 .muxsel_hook = gvc1100_muxsel,
1970 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
1971 .name = "NGS NGSTV+",
1975 .gpiomask = 0x008007,
1976 .muxsel = {2, 3, 0, 0},
1977 .audiomux = {0, 0, 0, 0, 0x000003, 0},
1979 .tuner_type = TUNER_PHILIPS_PAL,
1982 /* http://linuxmedialabs.com */
1984 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
1988 .muxsel = { 2, 3, 1, 0 },
1994 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
1995 .name = "Tekram M205 PRO",
1999 .tuner_type = TUNER_PHILIPS_PAL,
2003 .muxsel = { 2, 3, 1},
2004 .audiomux = { 0x68, 0x68, 0x61, 0x61, 0x00 },
2008 /* ---- card 0x78 ---------------------------------- */
2009 /* Javier Cendan Ares <jcendan@lycos.es> */
2010 /* bt878 TV + FM without subsystem ID */
2011 .name = "Conceptronic CONTVFMi",
2016 .gpiomask = 0x008007,
2017 .muxsel = { 2, 3, 1, 1 },
2018 .audiomux = { 0, 1, 2, 2, 3 },
2021 .tuner_type = TUNER_PHILIPS_PAL,
2025 /*Eric DEBIEF <debief@telemsa.com>*/
2026 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2027 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_PICOLO_TETRA_CHIP*/
2029 .name = "Euresys Picolo Tetra",
2035 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2039 .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/
2040 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2043 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2045 /* Spirit TV Tuner from http://spiritmodems.com.au */
2046 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2047 .name = "Spirit TV Tuner",
2052 .gpiomask = 0x0000000f,
2053 .muxsel = { 2, 1, 1 },
2054 .audiomux = { 0x02, 0x00, 0x00, 0x00, 0x00},
2055 .tuner_type = TUNER_TEMIC_PAL,
2059 /* Wolfram Joost <wojo@frokaschwei.de> */
2060 .name = "AVerMedia AVerTV DVB-T 771",
2064 .tuner_type = TUNER_ABSENT,
2065 .muxsel = { 3 , 3 },
2074 /* ---- card 0x7c ---------------------------------- */
2075 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2076 /* Based on the Nebula card data - added remote and new card number - BTTV_AVDVBT_761, see also ir-kbd-gpio.c */
2077 .name = "AverMedia AverTV DVB-T 761",
2081 .muxsel = { 3, 1, 2, 0}, /* Comp0, S-Video, ?, ? */
2091 /* andre.schwarz@matrix-vision.de */
2092 .name = "MATRIX Vision Sigma-SQ",
2098 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2,
2099 3, 3, 3, 3, 3, 3, 3, 3 },
2100 .muxsel_hook = sigmaSQ_muxsel,
2106 /* andre.schwarz@matrix-vision.de */
2107 .name = "MATRIX Vision Sigma-SLC",
2113 .muxsel = { 2, 2, 2, 2 },
2114 .muxsel_hook = sigmaSLC_muxsel,
2120 /* BTTV_APAC_VIEWCOMP */
2121 /* Attila Kondoros <attila.kondoros@chello.hu> */
2122 /* bt878 TV + FM 0x00000000 subsystem ID */
2123 .name = "APAC Viewcomp 878(AMAX)",
2129 .muxsel = { 2, 3, 1, 1},
2130 .audiomux = { 2, 0, 0, 0, 10},
2133 .tuner_type = TUNER_PHILIPS_PAL,
2134 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2135 .has_radio = 1, /* not every card has radio */
2138 /* ---- card 0x80 ---------------------------------- */
2139 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2140 .name = "DVICO FusionHDTV DVB-T Lite",
2150 /* Steven <photon38@pchome.com.tw> */
2151 .name = "V-Gear MyVCD",
2157 .muxsel = {2, 3, 1, 0},
2158 .audiomux = {0x31, 0x31, 0x31, 0x31, 0x31, 0x31},
2161 .tuner_type = TUNER_PHILIPS_NTSC_M,
2165 /* Rick C <cryptdragoon@gmail.com> */
2166 .name = "Super TV Tuner",
2171 .muxsel = { 2, 3, 1, 0},
2172 .tuner_type = TUNER_PHILIPS_NTSC,
2173 .gpiomask = 0x008007,
2174 .audiomux = { 0, 0x000001,0,0, 0},
2178 /* Chris Fanning <video4linux@haydon.net> */
2179 .name = "Tibet Systems 'Progress DVR' CS16",
2184 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2190 .muxsel_hook = tibetCS16_muxsel,
2193 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2195 /* ----------------------------------------------------------------------- */
2197 static unsigned char eeprom_data[256];
2202 void __devinit bttv_idcard(struct bttv *btv)
2204 unsigned int gpiobits;
2208 /* read PCI subsystem ID */
2209 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2210 btv->cardid = tmp << 16;
2211 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2214 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2215 /* look for the card */
2216 for (type = -1, i = 0; cards[i].id != 0; i++)
2217 if (cards[i].id == btv->cardid)
2222 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2223 "PCI subsystem ID is %04x:%04x\n",
2224 btv->c.nr,cards[type].name,cards[type].cardnr,
2225 btv->cardid & 0xffff,
2226 (btv->cardid >> 16) & 0xffff);
2227 btv->c.type = cards[type].cardnr;
2230 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2231 btv->c.nr, btv->cardid & 0xffff,
2232 (btv->cardid >> 16) & 0xffff);
2233 printk(KERN_DEBUG "please mail id, board name and "
2234 "the correct card= insmod option to kraxel@bytesex.org\n");
2238 /* let the user override the autodetected type */
2239 if (card[btv->c.nr] < bttv_num_tvcards)
2240 btv->c.type=card[btv->c.nr];
2242 /* print which card config we are using */
2243 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2244 bttv_tvcards[btv->c.type].name, btv->c.type,
2245 card[btv->c.nr] < bttv_num_tvcards
2246 ? "insmod option" : "autodetected");
2248 /* overwrite gpio stuff ?? */
2249 if (UNSET == audioall && UNSET == audiomux[0])
2252 if (UNSET != audiomux[0]) {
2254 for (i = 0; i < 5; i++) {
2255 bttv_tvcards[btv->c.type].audiomux[i] = audiomux[i];
2256 gpiobits |= audiomux[i];
2259 gpiobits = audioall;
2260 for (i = 0; i < 5; i++) {
2261 bttv_tvcards[btv->c.type].audiomux[i] = audioall;
2264 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2265 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2266 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2267 for (i = 0; i < 5; i++) {
2268 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].audiomux[i]);
2274 * (most) board specific initialisations goes here
2277 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2278 void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2282 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2283 type = BTTV_MODTEC_205;
2284 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2285 type = BTTV_EURESYS_PICOLO;
2286 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2287 type = BTTV_HAUPPAUGE; /* old bt848 */
2291 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
2292 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2296 static void flyvideo_gpio(struct bttv *btv)
2298 int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
2301 gpio_inout(0xffffff, 0);
2302 udelay(8); // without this we would see the 0x1800 mask
2304 /* FIXME: must restore OUR_EN ??? */
2306 // all cards provide GPIO info, some have an additional eeprom
2307 // LR50: GPIO coding can be found lower right CP1 .. CP9
2308 // CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2310 // LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2312 // lowest 3 bytes are remote control codes (no handshake needed)
2313 // xxxFFF: No remote control chip soldered
2314 // xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
2315 // Note: Some bits are Audio_Mask !
2317 ttype=(gpio&0x0f0000)>>16;
2319 case 0x0: tuner=2; // NTSC, e.g. TPI8NSR11P
2321 case 0x2: tuner=39;// LG NTSC (newer TAPC series) TAPC-H701P
2323 case 0x4: tuner=5; // Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216
2325 case 0x6: tuner=37; // LG PAL (newer TAPC series) TAPC-G702P
2327 case 0xC: tuner=3; // Philips SECAM(+PAL) FQ1216ME or FI1216MF
2330 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
2333 has_remote = gpio & 0x800000;
2334 has_radio = gpio & 0x400000;
2335 // unknown 0x200000;
2336 // unknown2 0x100000;
2337 is_capture_only = !(gpio & 0x008000); //GPIO15
2338 has_tda9820_tda9821 = !(gpio & 0x004000);
2339 is_lr90 = !(gpio & 0x002000); // else LR26/LR50 (LR38/LR51 f. capture only)
2340 // gpio & 0x001000 // output bit for audio routing
2343 tuner=4; // No tuner present
2345 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
2346 btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
2347 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
2348 btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
2349 is_capture_only?"yes":"no ");
2351 if(tuner!= -1) // only set if known tuner autodetected, else let insmod option through
2352 btv->tuner_type = tuner;
2353 btv->has_radio = has_radio;
2355 // LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
2356 // LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
2357 // Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute
2358 if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
2359 //todo: if(has_tda9874) btv->audio_hook = fv2000s_audio;
2362 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
2363 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
2364 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
2365 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
2367 static void miro_pinnacle_gpio(struct bttv *btv)
2372 gpio_inout(0xffffff, 0);
2374 id = ((gpio>>10) & 63) -1;
2375 msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
2377 btv->tuner_type = miro_tunermap[id];
2378 if (0 == (gpio & 0x20)) {
2380 if (!miro_fmtuner[id]) {
2381 btv->has_matchbox = 1;
2382 btv->mbox_we = (1<<6);
2383 btv->mbox_most = (1<<7);
2384 btv->mbox_clk = (1<<8);
2385 btv->mbox_data = (1<<9);
2386 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
2392 if (btv->c.type == BTTV_MIRO)
2393 btv->c.type = BTTV_MIROPRO;
2394 if (btv->c.type == BTTV_PINNACLE)
2395 btv->c.type = BTTV_PINNACLEPRO;
2398 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
2399 btv->c.nr, id+1, btv->tuner_type,
2400 !btv->has_radio ? "no" :
2401 (btv->has_matchbox ? "matchbox" : "fmtuner"),
2402 (-1 == msp) ? "no" : "yes");
2404 /* new cards with microtune tuner */
2409 info = "PAL / mono";
2412 info = "PAL+SECAM / stereo";
2416 info = "NTSC / stereo";
2420 info = "PAL+SECAM / mono";
2423 info = "NTSC / mono";
2426 info = "NTSC / stereo";
2429 info = "PAL / stereo";
2432 info = "oops: unknown card";
2436 btv->c.type = BTTV_PINNACLEPRO;
2438 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
2439 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
2440 btv->tuner_type = 33;
2441 btv->pinnacle_id = id;
2445 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
2446 #define LM1882_SYNC_DRIVE 0x200000L
2448 static void init_ids_eagle(struct bttv *btv)
2450 gpio_inout(0xffffff,0xFFFF37);
2451 gpio_write(0x200020);
2453 /* flash strobe inverter ?! */
2454 gpio_write(0x200024);
2456 /* switch sync drive off */
2457 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
2459 /* set BT848 muxel to 2 */
2460 btaor((2)<<5, ~(2<<5), BT848_IFORM);
2463 /* Muxsel helper for the IDS Eagle.
2464 * the eagles does not use the standard muxsel-bits but
2465 * has its own multiplexer */
2466 static void eagle_muxsel(struct bttv *btv, unsigned int input)
2468 btaor((2)<<5, ~(3<<5), BT848_IFORM);
2469 gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
2473 /* wake chroma ADC */
2474 btand(~BT848_ADC_C_SLEEP, BT848_ADC);
2475 /* set to YC video */
2476 btor(BT848_CONTROL_COMP, BT848_E_CONTROL);
2477 btor(BT848_CONTROL_COMP, BT848_O_CONTROL);
2480 /* set chroma ADC to sleep */
2481 btor(BT848_ADC_C_SLEEP, BT848_ADC);
2482 /* set to composite video */
2483 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
2484 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
2487 /* switch sync drive off */
2488 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
2491 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
2493 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
2494 gpio_write(masks[input%4]);
2497 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
2500 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
2501 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
2503 IN - sensor inputs, INx - sensor inputs and TI XORed together
2504 O1,O2,O3 - alarm outputs (relays)
2506 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
2510 static void init_lmlbt4x(struct bttv *btv)
2512 printk(KERN_DEBUG "LMLBT4x init\n");
2513 btwrite(0x000000, BT848_GPIO_REG_INP);
2514 gpio_inout(0xffffff, 0x0006C0);
2515 gpio_write(0x000000);
2518 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
2520 unsigned int inmux = input % 8;
2521 gpio_inout( 0xf, 0xf );
2522 gpio_bits( 0xf, inmux );
2525 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
2527 unsigned int inmux = input % 4;
2528 gpio_inout( 3<<9, 3<<9 );
2529 gpio_bits( 3<<9, inmux<<9 );
2532 /* ----------------------------------------------------------------------- */
2534 static void bttv_reset_audio(struct bttv *btv)
2537 * BT878A has a audio-reset register.
2538 * 1. This register is an audio reset function but it is in
2539 * function-0 (video capture) address space.
2540 * 2. It is enough to do this once per power-up of the card.
2541 * 3. There is a typo in the Conexant doc -- it is not at
2542 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
2543 * --//Shrikumar 030609
2549 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
2550 btwrite((1<<7), 0x058);
2555 /* initialization part one -- before registering i2c bus */
2556 void __devinit bttv_init_card1(struct bttv *btv)
2558 switch (btv->c.type) {
2559 case BTTV_HAUPPAUGE:
2560 case BTTV_HAUPPAUGE878:
2561 boot_msp34xx(btv,5);
2563 case BTTV_VOODOOTV_FM:
2564 boot_msp34xx(btv,20);
2566 case BTTV_AVERMEDIA98:
2567 boot_msp34xx(btv,11);
2569 case BTTV_HAUPPAUGEPVR:
2572 case BTTV_TWINHAN_DST:
2573 case BTTV_AVDVBT_771:
2574 btv->use_i2c_hw = 1;
2577 if (!bttv_tvcards[btv->c.type].has_dvb)
2578 bttv_reset_audio(btv);
2581 /* initialization part two -- after registering i2c bus */
2582 void __devinit bttv_init_card2(struct bttv *btv)
2585 btv->tuner_type = -1;
2587 if (BTTV_UNKNOWN == btv->c.type) {
2588 bttv_readee(btv,eeprom_data,0xa0);
2589 identify_by_eeprom(btv,eeprom_data);
2592 switch (btv->c.type) {
2596 case BTTV_PINNACLEPRO:
2598 miro_pinnacle_gpio(btv);
2600 case BTTV_FLYVIDEO_98:
2602 case BTTV_LIFE_FLYKIT:
2604 case BTTV_TYPHOON_TVIEW:
2605 case BTTV_CHRONOS_VS2:
2606 case BTTV_FLYVIDEO_98FM:
2607 case BTTV_FLYVIDEO2000:
2608 case BTTV_FLYVIDEO98EZ:
2609 case BTTV_CONFERENCETV:
2610 case BTTV_LIFETEC_9415:
2613 case BTTV_HAUPPAUGE:
2614 case BTTV_HAUPPAUGE878:
2615 case BTTV_HAUPPAUGEPVR:
2616 /* pick up some config infos from the eeprom */
2617 bttv_readee(btv,eeprom_data,0xa0);
2618 hauppauge_eeprom(btv);
2620 case BTTV_AVERMEDIA98:
2621 case BTTV_AVPHONE98:
2622 bttv_readee(btv,eeprom_data,0xa0);
2623 avermedia_eeprom(btv);
2628 case BTTV_PICOLO_TETRA_CHIP:
2629 picolo_tetra_init(btv);
2633 btv->has_matchbox = 1;
2634 btv->mbox_we = 0x20;
2636 btv->mbox_clk = 0x08;
2637 btv->mbox_data = 0x10;
2638 btv->mbox_mask = 0x38;
2640 case BTTV_VOBIS_BOOSTAR:
2642 terratec_active_radio_upgrade(btv);
2644 case BTTV_MAGICTVIEW061:
2645 if (btv->cardid == 0x3002144f) {
2647 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
2651 if (btv->cardid == 0x3060121a) {
2652 /* Fix up entry for 3DFX VoodooTV 100,
2653 which is an OEM STB card variant. */
2655 btv->tuner_type=TUNER_TEMIC_NTSC;
2658 case BTTV_OSPREY1x0:
2659 case BTTV_OSPREY1x0_848:
2660 case BTTV_OSPREY101_848:
2661 case BTTV_OSPREY1x1:
2662 case BTTV_OSPREY1x1_SVID:
2663 case BTTV_OSPREY2xx:
2664 case BTTV_OSPREY2x0_SVID:
2665 case BTTV_OSPREY2x0:
2666 case BTTV_OSPREY500:
2667 case BTTV_OSPREY540:
2668 case BTTV_OSPREY2000:
2669 bttv_readee(btv,eeprom_data,0xa0);
2672 case BTTV_IDS_EAGLE:
2673 init_ids_eagle(btv);
2675 case BTTV_MODTEC_205:
2676 bttv_readee(btv,eeprom_data,0xa0);
2682 case BTTV_TIBET_CS16:
2683 tibetCS16_init(btv);
2687 /* pll configuration */
2688 if (!(btv->id==848 && btv->revision==0x11)) {
2689 /* defaults from card list */
2690 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
2691 btv->pll.pll_ifreq=28636363;
2692 btv->pll.pll_crystal=BT848_IFORM_XT0;
2694 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
2695 btv->pll.pll_ifreq=35468950;
2696 btv->pll.pll_crystal=BT848_IFORM_XT1;
2698 /* insmod options can override */
2699 switch (pll[btv->c.nr]) {
2701 btv->pll.pll_crystal = 0;
2702 btv->pll.pll_ifreq = 0;
2703 btv->pll.pll_ofreq = 0;
2705 case 1: /* 28 MHz */
2707 btv->pll.pll_ifreq = 28636363;
2708 btv->pll.pll_ofreq = 0;
2709 btv->pll.pll_crystal = BT848_IFORM_XT0;
2711 case 2: /* 35 MHz */
2713 btv->pll.pll_ifreq = 35468950;
2714 btv->pll.pll_ofreq = 0;
2715 btv->pll.pll_crystal = BT848_IFORM_XT1;
2719 btv->pll.pll_current = -1;
2721 bttv_reset_audio(btv);
2723 /* tuner configuration (from card list / autodetect / insmod option) */
2724 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
2725 if(UNSET == btv->tuner_type)
2726 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
2727 if (UNSET != tuner[btv->c.nr])
2728 btv->tuner_type = tuner[btv->c.nr];
2729 printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
2730 if (btv->pinnacle_id != UNSET)
2731 bttv_call_i2c_clients(btv,AUDC_CONFIG_PINNACLE,
2733 if (btv->tuner_type != UNSET)
2734 bttv_call_i2c_clients(btv,TUNER_SET_TYPE,&btv->tuner_type);
2735 btv->svhs = bttv_tvcards[btv->c.type].svhs;
2736 if (svhs[btv->c.nr] != UNSET)
2737 btv->svhs = svhs[btv->c.nr];
2738 if (remote[btv->c.nr] != UNSET)
2739 btv->has_remote = remote[btv->c.nr];
2741 if (bttv_tvcards[btv->c.type].has_radio)
2743 if (bttv_tvcards[btv->c.type].has_remote)
2745 if (bttv_tvcards[btv->c.type].no_gpioirq)
2747 if (bttv_tvcards[btv->c.type].audio_hook)
2748 btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
2750 if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
2751 /* detect Bt832 chip for quartzsight digital camera */
2752 if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) ||
2753 (bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
2760 /* try to detect audio/fader chips */
2761 if (!bttv_tvcards[btv->c.type].no_msp34xx &&
2762 bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0)
2763 request_module("msp3400");
2765 if (bttv_tvcards[btv->c.type].msp34xx_alt &&
2766 bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
2767 request_module("msp3400");
2769 if (!bttv_tvcards[btv->c.type].no_tda9875 &&
2770 bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0)
2771 request_module("tda9875");
2773 if (!bttv_tvcards[btv->c.type].no_tda7432 &&
2774 bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0)
2775 request_module("tda7432");
2777 if (bttv_tvcards[btv->c.type].needs_tvaudio)
2778 request_module("tvaudio");
2782 if (btv->pinnacle_id != UNSET)
2784 if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
2785 bttv_I2CRead(btv, I2C_TDA9887, "TDA9887") >=0)
2787 if((btv->tuner_type == TUNER_PHILIPS_FM1216ME_MK3) ||
2788 (btv->tuner_type == TUNER_PHILIPS_FM1236_MK3) ||
2789 (btv->tuner_type == TUNER_PHILIPS_FM1256_IH3) ||
2791 request_module("tda9887");
2792 if (btv->tuner_type != UNSET)
2793 request_module("tuner");
2797 /* ----------------------------------------------------------------------- */
2799 static void modtec_eeprom(struct bttv *btv)
2801 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
2802 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
2803 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
2804 btv->c.nr,&eeprom_data[0x1e]);
2805 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
2806 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
2807 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
2808 btv->c.nr,&eeprom_data[0x1e]);
2809 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
2810 btv->tuner_type=TUNER_PHILIPS_NTSC;
2811 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
2812 btv->c.nr,&eeprom_data[0x1e]);
2814 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
2815 btv->c.nr,&eeprom_data[0x1e]);
2819 static void __devinit hauppauge_eeprom(struct bttv *btv)
2823 tveeprom_hauppauge_analog(&tv, eeprom_data);
2824 btv->tuner_type = tv.tuner_type;
2825 btv->has_radio = tv.has_radio;
2828 static int terratec_active_radio_upgrade(struct bttv *btv)
2833 btv->has_matchbox = 1;
2834 btv->mbox_we = 0x10;
2835 btv->mbox_most = 0x20;
2836 btv->mbox_clk = 0x08;
2837 btv->mbox_data = 0x04;
2838 btv->mbox_mask = 0x3c;
2840 btv->mbox_iow = 1 << 8;
2841 btv->mbox_ior = 1 << 9;
2842 btv->mbox_csel = 1 << 10;
2845 tea5757_write(btv, 5 * freq + 0x358); // write 0x1ed8
2846 if (0x1ed8 == tea5757_read(btv)) {
2847 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
2850 btv->has_matchbox = 1;
2853 btv->has_matchbox = 0;
2859 /* ----------------------------------------------------------------------- */
2862 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
2864 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
2865 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
2866 * unpacked with unzip).
2868 #define PVR_GPIO_DELAY 10
2870 #define BTTV_ALT_DATA 0x000001
2871 #define BTTV_ALT_DCLK 0x100000
2872 #define BTTV_ALT_NCONFIG 0x800000
2874 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
2880 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
2882 udelay(PVR_GPIO_DELAY);
2884 gpio_write(BTTV_ALT_NCONFIG);
2885 udelay(PVR_GPIO_DELAY);
2887 for (n = 0; n < microlen; n++) {
2889 for ( i = 0 ; i < 8 ; i++ ) {
2890 gpio_bits(BTTV_ALT_DCLK,0);
2892 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
2894 gpio_bits(BTTV_ALT_DATA,0);
2895 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
2899 gpio_bits(BTTV_ALT_DCLK,0);
2900 udelay(PVR_GPIO_DELAY);
2902 /* begin Altera init loop (Not necessary,but doesn't hurt) */
2903 for (i = 0 ; i < 30 ; i++) {
2904 gpio_bits(BTTV_ALT_DCLK,0);
2905 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
2907 gpio_bits(BTTV_ALT_DCLK,0);
2911 static int __devinit pvr_boot(struct bttv *btv)
2913 const struct firmware *fw_entry;
2916 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
2918 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
2922 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
2923 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
2924 btv->c.nr, (rc < 0) ? "failed" : "ok");
2925 release_firmware(fw_entry);
2929 /* ----------------------------------------------------------------------- */
2930 /* some osprey specific stuff */
2932 static void __devinit osprey_eeprom(struct bttv *btv)
2935 unsigned char *ee = eeprom_data;
2936 unsigned long serial = 0;
2938 if (btv->c.type == 0) {
2939 /* this might be an antique... check for MMAC label in eeprom */
2940 if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
2941 unsigned char checksum = 0;
2942 for (i =0; i<21; i++)
2944 if (checksum != ee[21])
2946 btv->c.type = BTTV_OSPREY1x0_848;
2947 for (i = 12; i < 21; i++)
2948 serial *= 10, serial += ee[i] - '0';
2951 unsigned short type;
2954 for(; offset < 8*16; offset += 16) {
2955 unsigned short checksum = 0;
2956 /* verify the checksum */
2957 for(i = 0; i<14; i++) checksum += ee[i+offset];
2958 checksum = ~checksum; /* no idea why */
2959 if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
2960 ((checksum & 0x0FF) == ee[offset+15])) {
2968 /* found a valid descriptor */
2969 type = (ee[offset+4]<<8) | (ee[offset+5]);
2975 btv->c.type = BTTV_OSPREY1x0_848;
2978 btv->c.type = BTTV_OSPREY101_848;
2984 btv->c.type = BTTV_OSPREY1x0;
2988 btv->c.type = BTTV_OSPREY1x1;
2993 btv->c.type = BTTV_OSPREY1x1_SVID;
2999 btv->c.type = BTTV_OSPREY2xx;
3003 btv->c.type = BTTV_OSPREY2x0_SVID;
3006 btv->c.type = BTTV_OSPREY500;
3010 btv->c.type = BTTV_OSPREY540;
3011 /* bttv_osprey_540_init(btv); */
3015 btv->c.type = BTTV_OSPREY2x0;
3016 //enable output on select control lines
3017 gpio_inout(0xffffff,0x000303);
3020 /* unknown...leave generic, but get serial # */
3023 serial = (ee[offset+6] << 24)
3024 | (ee[offset+7] << 16)
3025 | (ee[offset+8] << 8)
3029 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
3030 btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial);
3033 /* ----------------------------------------------------------------------- */
3034 /* AVermedia specific stuff, from bktr_card.c */
3036 static int tuner_0_table[] = {
3037 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3038 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3039 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3040 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3041 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3042 TUNER_PHILIPS_FM1216ME_MK3 };
3044 int tuner_0_fm_table[] = {
3045 PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL,
3046 PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
3047 PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
3048 PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM,
3049 PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL};
3052 static int tuner_1_table[] = {
3053 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3054 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3055 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3056 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, //TUNER_TEMIC_SECAM
3057 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3059 static void __devinit avermedia_eeprom(struct bttv *btv)
3061 int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
3063 tuner_make = (eeprom_data[0x41] & 0x7);
3064 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3065 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3066 btv->has_remote = (eeprom_data[0x42] & 0x01);
3068 if (tuner_make == 0 || tuner_make == 2)
3069 if(tuner_format <=0x0a)
3070 tuner = tuner_0_table[tuner_format];
3071 if (tuner_make == 1)
3072 if(tuner_format <=9)
3073 tuner = tuner_1_table[tuner_format];
3075 if (tuner_make == 4)
3076 if(tuner_format == 0x09)
3077 tuner = TUNER_LG_NTSC_NEW_TAPC; // TAPC-G702P
3079 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3080 btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
3082 btv->tuner_type=tuner;
3085 printk("Unknown type");
3086 printk(" radio:%s remote control:%s\n",
3087 tuner_tv_fm ? "yes" : "no",
3088 btv->has_remote ? "yes" : "no");
3091 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3092 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
3094 // fix up our card entry
3095 if(norm==VIDEO_MODE_NTSC) {
3096 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff;
3097 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff;
3098 dprintk("bttv_tda9880_setnorm to NTSC\n");
3101 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x947fff;
3102 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff;
3103 dprintk("bttv_tda9880_setnorm to PAL\n");
3105 // set GPIO according
3106 gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
3107 bttv_tvcards[btv->c.type].audiomux[btv->audio]);
3112 * reset/enable the MSP on some Hauppauge cards
3113 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3118 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3120 int mask = (1 << pin);
3122 gpio_inout(mask,mask);
3125 gpio_bits(mask,mask);
3128 bttv_gpio_tracking(btv,"msp34xx");
3130 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3131 "init [%d]\n", btv->c.nr, pin);
3134 static void __devinit boot_bt832(struct bttv *btv)
3136 #if 0 /* not working yet */
3139 switch (btv->c.type) {
3140 case BTTV_PXELVWPLTVPAK:
3141 resetbit = 0x400000;
3143 case BTTV_MODTEC_205:
3150 request_module("bt832");
3151 bttv_call_i2c_clients(btv, BT832_HEXDUMP, NULL);
3153 printk("bttv%d: Reset Bt832 [line=0x%x]\n",btv->c.nr,resetbit);
3155 gpio_inout(resetbit, resetbit);
3157 gpio_bits(resetbit, resetbit);
3159 gpio_bits(resetbit, 0);
3162 // bt832 on pixelview changes from i2c 0x8a to 0x88 after
3163 // being reset as above. So we must follow by this:
3164 bttv_call_i2c_clients(btv, BT832_REATTACH, NULL);
3168 /* ----------------------------------------------------------------------- */
3169 /* Imagenation L-Model PXC200 Framegrabber */
3170 /* This is basically the same procedure as
3171 * used by Alessandro Rubini in his pxc200
3172 * driver, but using BTTV functions */
3174 static void __devinit init_PXC200(struct bttv *btv)
3176 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3177 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3183 /* Initialise GPIO-connevted stuff */
3184 gpio_inout(0xffffff, (1<<13));
3188 /* GPIO inputs are pulled up, so no need to drive
3189 * reset pin any longer */
3190 gpio_bits(0xffffff, 0);
3192 bttv_gpio_tracking(btv,"pxc200");
3194 /* we could/should try and reset/control the AD pots? but
3195 right now we simply turned off the crushing. Without
3196 this the AGC drifts drifts
3197 remember the EN is reverse logic -->
3198 setting BT848_ADC_AGC_EN disable the AGC
3199 tboult@eecs.lehigh.edu
3202 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3204 /* Initialise MAX517 DAC */
3205 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3206 bttv_I2CWrite(btv,0x5E,0,0x80,1);
3208 /* Initialise 12C508 PIC */
3209 /* The I2CWrite and I2CRead commmands are actually to the
3210 * same chips - but the R/W bit is included in the address
3211 * argument so the numbers are different */
3214 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3216 /* First of all, enable the clock line. This is used in the PXC200-F */
3217 val = btread(BT848_GPIO_DMA_CTL);
3218 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3219 btwrite(val, BT848_GPIO_DMA_CTL);
3221 /* Then, push to 0 the reset pin long enough to reset the *
3222 * device same as above for the reset line, but not the same
3223 * value sent to the GPIO-connected stuff
3224 * which one is the good one? */
3225 gpio_inout(0xffffff,(1<<2));
3230 for (i = 0; i < ARRAY_SIZE(vals); i++) {
3231 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
3234 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3235 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
3239 printk(KERN_INFO "PXC200 Initialised.\n");
3243 /* ----------------------------------------------------------------------- */
3244 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
3246 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
3247 * This code is placed under the terms of the GNU General Public License
3249 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
3252 static void bus_low(struct bttv *btv, int bit)
3254 if (btv->mbox_ior) {
3255 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3256 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3263 if (btv->mbox_ior) {
3264 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3269 static void bus_high(struct bttv *btv, int bit)
3271 if (btv->mbox_ior) {
3272 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3273 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3280 if (btv->mbox_ior) {
3281 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3286 static int bus_in(struct bttv *btv, int bit)
3288 if (btv->mbox_ior) {
3289 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3290 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3293 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3296 return gpio_read() & (bit);
3299 /* TEA5757 register bits */
3300 #define TEA_FREQ 0:14
3301 #define TEA_BUFFER 15:15
3303 #define TEA_SIGNAL_STRENGTH 16:17
3305 #define TEA_PORT1 18:18
3306 #define TEA_PORT0 19:19
3308 #define TEA_BAND 20:21
3309 #define TEA_BAND_FM 0
3310 #define TEA_BAND_MW 1
3311 #define TEA_BAND_LW 2
3312 #define TEA_BAND_SW 3
3314 #define TEA_MONO 22:22
3315 #define TEA_ALLOW_STEREO 0
3316 #define TEA_FORCE_MONO 1
3318 #define TEA_SEARCH_DIRECTION 23:23
3319 #define TEA_SEARCH_DOWN 0
3320 #define TEA_SEARCH_UP 1
3322 #define TEA_STATUS 24:24
3323 #define TEA_STATUS_TUNED 0
3324 #define TEA_STATUS_SEARCHING 1
3326 /* Low-level stuff */
3327 static int tea5757_read(struct bttv *btv)
3329 unsigned long timeout;
3333 /* better safe than sorry */
3334 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
3336 if (btv->mbox_ior) {
3337 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3338 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3343 bttv_gpio_tracking(btv,"tea5757 read");
3345 bus_low(btv,btv->mbox_we);
3346 bus_low(btv,btv->mbox_clk);
3349 timeout= jiffies + HZ;
3351 // wait for DATA line to go low; error if it doesn't
3352 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
3354 if (bus_in(btv,btv->mbox_data)) {
3355 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
3359 dprintk("bttv%d: tea5757:",btv->c.nr);
3360 for(i = 0; i < 24; i++)
3363 bus_high(btv,btv->mbox_clk);
3365 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
3366 bus_low(btv,btv->mbox_clk);
3368 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
3369 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
3371 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
3375 static int tea5757_write(struct bttv *btv, int value)
3380 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
3382 if (btv->mbox_ior) {
3383 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3384 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3388 bttv_gpio_tracking(btv,"tea5757 write");
3390 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
3391 bus_low(btv,btv->mbox_clk);
3392 bus_high(btv,btv->mbox_we);
3393 for(i = 0; i < 25; i++)
3395 if (reg & 0x1000000)
3396 bus_high(btv,btv->mbox_data);
3398 bus_low(btv,btv->mbox_data);
3400 bus_high(btv,btv->mbox_clk);
3402 bus_low(btv,btv->mbox_clk);
3405 bus_low(btv,btv->mbox_we); /* unmute !!! */
3409 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
3411 dprintk("tea5757_set_freq %d\n",freq);
3412 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
3414 /* breaks Miro PCTV */
3415 value = tea5757_read(btv);
3416 dprintk("bttv%d: tea5757 readback=0x%x\n",btv->c.nr,value);
3421 /* ----------------------------------------------------------------------- */
3424 void winview_audio(struct bttv *btv, struct video_audio *v, int set)
3426 /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
3427 int bits_out, loops, vol, data;
3430 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
3431 v->flags |= VIDEO_AUDIO_VOLUME;
3435 /* 32 levels logarithmic */
3436 vol = 32 - ((v->volume>>11));
3438 bits_out = (PT2254_DBS_IN_2>>(vol%5));
3440 bits_out |= (PT2254_DBS_IN_10>>(vol/5));
3441 bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
3443 data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
3444 WINVIEW_PT2254_STROBE);
3445 for (loops = 17; loops >= 0 ; loops--) {
3446 if (bits_out & (1<<loops))
3447 data |= WINVIEW_PT2254_DATA;
3449 data &= ~WINVIEW_PT2254_DATA;
3452 data |= WINVIEW_PT2254_CLK;
3455 data &= ~WINVIEW_PT2254_CLK;
3458 data |= WINVIEW_PT2254_STROBE;
3459 data &= ~WINVIEW_PT2254_DATA;
3462 data &= ~WINVIEW_PT2254_STROBE;
3466 /* ----------------------------------------------------------------------- */
3467 /* mono/stereo control for various cards (which don't use i2c chips but */
3468 /* connect something to the GPIO pins */
3471 gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
3473 unsigned int con = 0;
3476 gpio_inout(0x300, 0x300);
3477 if (v->mode & VIDEO_SOUND_LANG1)
3479 if (v->mode & VIDEO_SOUND_LANG2)
3481 if (v->mode & VIDEO_SOUND_STEREO)
3483 // if (v->mode & VIDEO_SOUND_MONO)
3485 gpio_bits(0x300, con);
3487 v->mode = VIDEO_SOUND_STEREO |
3488 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3493 gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
3495 unsigned int val, con;
3497 #if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
3498 if (btv->radio_user)
3508 if (v->mode & VIDEO_SOUND_LANG2) {
3509 if (v->mode & VIDEO_SOUND_LANG1) {
3518 if (con != (val & 0x300)) {
3519 gpio_bits(0x300, con);
3521 bttv_gpio_tracking(btv,"gvbctv5pci");
3524 switch (val & 0x70) {
3526 v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3529 v->mode = VIDEO_SOUND_LANG2;
3532 v->mode = VIDEO_SOUND_LANG1;
3535 v->mode = VIDEO_SOUND_STEREO;
3538 v->mode = VIDEO_SOUND_MONO;
3541 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3542 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3548 * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
3549 * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
3550 * 0xdde enables mono and 0xccd enables sap
3552 * Petr Vandrovec <VANDROVE@vc.cvut.cz>
3553 * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
3554 * input/output sound connection, so both must be set for output mode.
3556 * Looks like it's needed only for the "tvphone", the "tvphone 98"
3557 * handles this with a tda9840
3561 avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
3566 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
3568 if (v->mode & VIDEO_SOUND_STEREO)
3571 gpio_bits(0x03,val);
3573 bttv_gpio_tracking(btv,"avermedia");
3576 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3583 avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
3588 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
3590 if (v->mode & VIDEO_SOUND_STEREO) /* STEREO */
3592 btaor(val, ~0x03, BT848_GPIO_DATA);
3594 bttv_gpio_tracking(btv,"avermedia");
3596 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3597 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3602 /* Lifetec 9415 handling */
3604 lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
3608 if (gpio_read() & 0x4000) {
3609 v->mode = VIDEO_SOUND_MONO;
3614 if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
3616 if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
3618 if ((v->mode & VIDEO_SOUND_LANG1) ||
3619 (v->mode & VIDEO_SOUND_MONO))
3621 gpio_bits(0x0880, val);
3623 bttv_gpio_tracking(btv,"lt9415");
3625 /* autodetect doesn't work with this card :-( */
3626 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3627 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3632 // TDA9821 on TerraTV+ Bt848, Bt878
3634 terratv_audio(struct bttv *btv, struct video_audio *v, int set)
3636 unsigned int con = 0;
3639 gpio_inout(0x180000,0x180000);
3640 if (v->mode & VIDEO_SOUND_LANG2)
3642 if (v->mode & VIDEO_SOUND_STEREO)
3644 gpio_bits(0x180000, con);
3646 bttv_gpio_tracking(btv,"terratv");
3648 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3649 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3654 winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
3656 unsigned long val = 0;
3659 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
3660 if (v->mode & VIDEO_SOUND_MONO) /* Mono */
3662 if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
3664 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
3666 if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
3669 gpio_bits(0x430000, val);
3671 bttv_gpio_tracking(btv,"winfast2000");
3674 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3675 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3680 * Dariusz Kowalewski <darekk@automex.pl>
3681 * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
3682 * revision 9B has on-board TDA9874A sound decoder).
3684 * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
3685 * will mute this cards.
3688 pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
3690 unsigned int val = 0;
3692 #if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
3693 if (btv->radio_user)
3701 if (v->mode & VIDEO_SOUND_MONO) {
3704 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
3705 || (v->mode & VIDEO_SOUND_STEREO)) {
3709 gpio_bits(0x03,val);
3711 bttv_gpio_tracking(btv,"pvbt878p9b");
3714 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3715 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3720 * Dariusz Kowalewski <darekk@automex.pl>
3721 * sound control for FlyVideo 2000S (with tda9874 decoder)
3722 * based on pvbt878p9b_audio() - this is not tested, please fix!!!
3725 fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
3727 unsigned int val = 0xffff;
3729 #if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
3730 if (btv->radio_user)
3737 if (v->mode & VIDEO_SOUND_MONO) {
3740 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
3741 || (v->mode & VIDEO_SOUND_STEREO)) {
3742 val = 0x1080; //-dk-???: 0x0880, 0x0080, 0x1800 ...
3744 if (val != 0xffff) {
3745 gpio_bits(0x1800, val);
3747 bttv_gpio_tracking(btv,"fv2000s");
3750 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3751 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3756 * sound control for Canopus WinDVR PCI
3757 * Masaki Suzuki <masaki@btree.org>
3760 windvr_audio(struct bttv *btv, struct video_audio *v, int set)
3762 unsigned long val = 0;
3765 if (v->mode & VIDEO_SOUND_MONO)
3767 if (v->mode & VIDEO_SOUND_LANG1)
3769 if (v->mode & VIDEO_SOUND_LANG2)
3771 if (v->mode & VIDEO_SOUND_STEREO)
3774 gpio_bits(0x140000, val);
3776 bttv_gpio_tracking(btv,"windvr");
3779 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3780 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3785 * sound control for AD-TVK503
3786 * Hiroshi Takekawa <sian@big.or.jp>
3789 adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
3791 unsigned int con = 0xffffff;
3793 //btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN);
3796 //btor(***, BT848_GPIO_OUT_EN);
3797 if (v->mode & VIDEO_SOUND_LANG1)
3799 if (v->mode & VIDEO_SOUND_LANG2)
3801 if (v->mode & VIDEO_SOUND_STEREO)
3803 if (v->mode & VIDEO_SOUND_MONO)
3805 if (con != 0xffffff) {
3806 gpio_bits(0x1e0000,con);
3808 bttv_gpio_tracking(btv, "adtvk503");
3811 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3812 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3816 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
3818 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
3819 * switch instead (CD22M3494E). This IC can have multiple active connections
3820 * between Xn (input) and Yn (output) pins. We need to clear any existing
3821 * connection prior to establish a new one, pulsing the STROBE pin.
3823 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
3824 * GPIO pins are wired as:
3825 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
3826 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
3827 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
3828 * GPIO[8] - - P3[5] (microcontroler)
3829 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
3830 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
3831 * GPINTR - - P3[4] (microcontroler)
3833 * The microcontroler is a 80C32 like. It should be possible to change xpoint
3834 * configuration either directly (as we are doing) or using the microcontroler
3835 * which is also wired to I2C interface. I have no further info on the
3836 * microcontroler features, one would need to disassembly the firmware.
3837 * note: the vendor refused to give any information on this product, all
3838 * that stuff was found using a multimeter! :)
3840 static void rv605_muxsel(struct bttv *btv, unsigned int input)
3842 /* reset all conections */
3843 gpio_bits(0x200,0x200);
3845 gpio_bits(0x200,0x000);
3848 /* create a new conection */
3849 gpio_bits(0x480,0x080);
3850 gpio_bits(0x480,0x480);
3852 gpio_bits(0x480,0x080);
3856 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
3858 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
3859 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
3860 * chips, ten eight input analog multiplexors, a not chip and a few
3863 * 16 inputs on a secondary bracket are provided and can be selected
3864 * from each of the four capture chips. Two of the eight input
3865 * multiplexors are used to select from any of the 16 input signals.
3867 * Unsupported hardware capabilities:
3868 * . A video output monitor on the secondary bracket can be selected from
3869 * one of the 878A chips.
3870 * . Another passthrough but I haven't spent any time investigating it.
3871 * . Digital I/O (logic level connected to GPIO) is available from an
3874 * The on chip input mux should always be set to 2.
3875 * GPIO[16:19] - Video input selection
3876 * GPIO[0:3] - Video output monitor select (only available from one 878A)
3877 * GPIO[?:?] - Digital I/O.
3879 * There is an ATMEL microcontroller with an 8031 core on board. I have not
3880 * determined what function (if any) it provides. With the microcontroller
3881 * and sync seperator chips a guess is that it might have to do with video
3882 * switching and maybe some digital I/O.
3884 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
3887 gpio_bits(0x0f0000, input << 16);
3890 static void tibetCS16_init(struct bttv *btv)
3892 /* enable gpio bits, mask obtained via btSpy */
3893 gpio_inout(0xffffff, 0x0f7fff);
3894 gpio_write(0x0f7fff);
3897 // The Grandtec X-Guard framegrabber card uses two Dual 4-channel
3898 // video multiplexers to provide up to 16 video inputs. These
3899 // multiplexers are controlled by the lower 8 GPIO pins of the
3900 // bt878. The multiplexers probably Pericom PI5V331Q or similar.
3902 // xxx0 is pin xxx of multiplexer U5,
3903 // yyy1 is pin yyy of multiplexer U2
3915 static void xguard_muxsel(struct bttv *btv, unsigned int input)
3917 static const int masks[] = {
3918 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
3919 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
3920 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
3921 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
3923 gpio_write(masks[input%16]);
3925 static void picolo_tetra_init(struct bttv *btv)
3927 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
3928 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
3929 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
3931 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
3934 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
3935 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
3936 /*GPIO[20]&GPIO[21] used to choose the right input*/
3937 btwrite (input<<20,BT848_GPIO_DATA);
3942 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
3944 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
3945 * swichers to provide 16 channels to MUX0. The TDA8540's have
3946 * 4 indepedant outputs and as such the IVC120G also has the
3947 * optional "Monitor Out" bus. This allows the card to be looking
3948 * at one input while the monitor is looking at another.
3950 * Since I've couldn't be bothered figuring out how to add an
3951 * independant muxsel for the monitor bus, I've just set it to
3952 * whatever the card is looking at.
3954 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
3955 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
3957 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
3958 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
3959 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
3960 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
3964 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
3965 #define I2C_TDA8540 0x90
3966 #define I2C_TDA8540_ALT1 0x92
3967 #define I2C_TDA8540_ALT2 0x94
3968 #define I2C_TDA8540_ALT3 0x96
3969 #define I2C_TDA8540_ALT4 0x98
3970 #define I2C_TDA8540_ALT5 0x9a
3971 #define I2C_TDA8540_ALT6 0x9c
3973 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
3976 int key = input % 4;
3977 int matrix = input / 4;
3979 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
3980 btv->c.nr, input, matrix, key);
3982 // Handles the input selection on the TDA8540's
3983 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
3984 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
3985 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
3986 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
3987 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
3988 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
3989 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
3990 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
3992 // Handles the output enables on the TDA8540's
3993 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
3994 ((matrix == 3) ? 0x03 : 0x00), 1); // 13 - 16
3995 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
3996 ((matrix == 0) ? 0x03 : 0x00), 1); // 1-4
3997 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
3998 ((matrix == 1) ? 0x03 : 0x00), 1); // 5-8
3999 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4000 ((matrix == 2) ? 0x03 : 0x00), 1); // 9-12
4002 // Selects MUX0 for input on the 878
4003 btaor((0)<<5, ~(3<<5), BT848_IFORM);
4007 /* PXC200 muxsel helper
4008 * luke@syseng.anu.edu.au
4009 * another transplant
4010 * from Alessandro Rubini (rubini@linux.it)
4012 * There are 4 kinds of cards:
4013 * PXC200L which is bt848
4014 * PXC200F which is bt848 with PIC controlling mux
4015 * PXC200AL which is bt878
4016 * PXC200AF which is bt878 with PIC controlling mux
4018 #define PX_CFG_PXC200F 0x01
4019 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4020 #define PX_I2C_PIC 0x0f
4021 #define PX_PXC200A_CARDID 0x200a1295
4022 #define PX_I2C_CMD_CFG 0x00
4024 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4029 unsigned char buf[2];
4031 /* Read PIC config to determine if this is a PXC200F */
4035 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4037 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4038 /* not PXC ? do nothing */
4042 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4043 if (!(rc & PX_CFG_PXC200F)) {
4044 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4049 /* The multiplexer in the 200F is handled by the GPIO port */
4050 /* get correct mapping between inputs */
4051 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4052 /* ** not needed!? */
4055 /* make sure output pins are enabled */
4056 /* bitmask=0x30f; */
4058 /* check whether we have a PXC200A */
4059 if (btv->cardid == PX_PXC200A_CARDID) {
4060 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4061 bitmask |= 7<<4; /* the DAC */
4063 btwrite(bitmask, BT848_GPIO_OUT_EN);
4065 bitmask = btread(BT848_GPIO_DATA);
4066 if (btv->cardid == PX_PXC200A_CARDID)
4067 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4068 else /* older device */
4069 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4070 btwrite(bitmask,BT848_GPIO_DATA);
4073 * Was "to be safe, set the bt848 to input 0"
4074 * Actually, since it's ok at load time, better not messing
4075 * with these bits (on PXC200AF you need to set mux 2 here)
4077 * needed because bttv-driver sets mux before calling this function
4079 if (btv->cardid == PX_PXC200A_CARDID)
4080 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4081 else /* older device */
4082 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4084 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4087 /* ----------------------------------------------------------------------- */
4088 /* motherboard chipset specific stuff */
4090 void __devinit bttv_check_chipset(void)
4092 int pcipci_fail = 0;
4093 struct pci_dev *dev = NULL;
4095 if (pci_pci_problems & PCIPCI_FAIL)
4097 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4099 if (pci_pci_problems & PCIPCI_VSFX)
4101 #ifdef PCIPCI_ALIMAGIK
4102 if (pci_pci_problems & PCIPCI_ALIMAGIK)
4107 /* print which chipset we have */
4108 while ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8,dev)))
4109 printk(KERN_INFO "bttv: Host bridge is %s\n",pci_name(dev));
4112 /* print warnings about any quirks found */
4114 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4116 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4118 printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
4119 if (UNSET == no_overlay) {
4120 printk(KERN_WARNING "bttv: going to disable overlay.\n");
4124 if (UNSET != latency)
4125 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4127 while ((dev = pci_find_device(PCI_VENDOR_ID_INTEL,
4128 PCI_DEVICE_ID_INTEL_82441, dev))) {
4130 pci_read_config_byte(dev, 0x53, &b);
4132 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4133 "bufcon=0x%02x\n",b);
4137 int __devinit bttv_handle_chipset(struct bttv *btv)
4139 unsigned char command;
4141 if (!triton1 && !vsfx && UNSET == latency)
4146 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4147 if (vsfx && btv->id >= 878)
4148 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4149 if (UNSET != latency)
4150 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4154 if (btv->id < 878) {
4155 /* bt848 (mis)uses a bit in the irq mask for etbf */
4157 btv->triton1 = BT848_INT_ETBF;
4159 /* bt878 has a bit in the pci config space for it */
4160 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4162 command |= BT878_EN_TBFX;
4164 command |= BT878_EN_VSFX;
4165 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4167 if (UNSET != latency)
4168 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);