drivers/net/eexpress.c

   1 /* Intel EtherExpress 16 device driver for Linux
   2  *
   3  * Written by John Sullivan, 1995
   4  *  based on original code by Donald Becker, with changes by
   5  *  Alan Cox and Pauline Middelink.
   6  *
   7  * Support for 8-bit mode by Zoltan Szilagyi <zoltans@cs.arizona.edu>
   8  *
   9  * Many modifications, and currently maintained, by
  10  *  Philip Blundell <philb@gnu.org>
  11  * Added the Compaq LTE  Alan Cox <alan@redhat.com>
  12  * Added MCA support Adam Fritzler <mid@auk.cx>
  13  *
  14  * Note - this driver is experimental still - it has problems on faster
  15  * machines. Someone needs to sit down and go through it line by line with
  16  * a databook...
  17  */
  18
  19 /* The EtherExpress 16 is a fairly simple card, based on a shared-memory
  20  * design using the i82586 Ethernet coprocessor.  It bears no relationship,
  21  * as far as I know, to the similarly-named "EtherExpress Pro" range.
  22  *
  23  * Historically, Linux support for these cards has been very bad.  However,
  24  * things seem to be getting better slowly.
  25  */
  26
  27 /* If your card is confused about what sort of interface it has (eg it
  28  * persistently reports "10baseT" when none is fitted), running 'SOFTSET /BART'
  29  * or 'SOFTSET /LISA' from DOS seems to help.
  30  */
  31
  32 /* Here's the scoop on memory mapping.
  33  *
  34  * There are three ways to access EtherExpress card memory: either using the
  35  * shared-memory mapping, or using PIO through the dataport, or using PIO
  36  * through the "shadow memory" ports.
  37  *
  38  * The shadow memory system works by having the card map some of its memory
  39  * as follows:
  40  *
  41  * (the low five bits of the SMPTR are ignored)
  42  *
  43  *  base+0x4000..400f      memory at SMPTR+0..15
  44  *  base+0x8000..800f      memory at SMPTR+16..31
  45  *  base+0xc000..c007      dubious stuff (memory at SMPTR+16..23 apparently)
  46  *  base+0xc008..c00f      memory at 0x0008..0x000f
  47  *
  48  * This last set (the one at c008) is particularly handy because the SCB
  49  * lives at 0x0008.  So that set of ports gives us easy random access to data
  50  * in the SCB without having to mess around setting up pointers and the like.
  51  * We always use this method to access the SCB (via the scb_xx() functions).
  52  *
  53  * Dataport access works by aiming the appropriate (read or write) pointer
  54  * at the first address you're interested in, and then reading or writing from
  55  * the dataport.  The pointers auto-increment after each transfer.  We use
  56  * this for data transfer.
  57  *
  58  * We don't use the shared-memory system because it allegedly doesn't work on
  59  * all cards, and because it's a bit more prone to go wrong (it's one more
  60  * thing to configure...).
  61  */
  62
  63 /* Known bugs:
  64  *
  65  * - The card seems to want to give us two interrupts every time something
  66  *   happens, where just one would be better.
  67  */
  68
  69 /*
  70  *
  71  * Note by Zoltan Szilagyi 10-12-96:
  72  *
  73  * I've succeeded in eliminating the "CU wedged" messages, and hence the
  74  * lockups, which were only occurring with cards running in 8-bit mode ("force
  75  * 8-bit operation" in Intel's SoftSet utility). This version of the driver
  76  * sets the 82586 and the ASIC to 8-bit mode at startup; it also stops the
  77  * CU before submitting a packet for transmission, and then restarts it as soon
  78  * as the process of handing the packet is complete. This is definitely an
  79  * unnecessary slowdown if the card is running in 16-bit mode; therefore one
  80  * should detect 16-bit vs 8-bit mode from the EEPROM settings and act
  81  * accordingly. In 8-bit mode with this bugfix I'm getting about 150 K/s for
  82  * ftp's, which is significantly better than I get in DOS, so the overhead of
  83  * stopping and restarting the CU with each transmit is not prohibitive in
  84  * practice.
  85  *
  86  * Update by David Woodhouse 11/5/99:
  87  *
  88  * I've seen "CU wedged" messages in 16-bit mode, on the Alpha architecture.
  89  * I assume that this is because 16-bit accesses are actually handled as two
  90  * 8-bit accesses.
  91  */
  92
  93 #ifdef __alpha__
  94 #define LOCKUP16 1
  95 #endif
  96 #ifndef LOCKUP16
  97 #define LOCKUP16 0
  98 #endif
  99
 100 #include <linux/config.h>
 101 #include <linux/module.h>
 102 #include <linux/kernel.h>
 103 #include <linux/types.h>
 104 #include <linux/fcntl.h>
 105 #include <linux/interrupt.h>
 106 #include <linux/ioport.h>
 107 #include <linux/string.h>
 108 #include <linux/in.h>
 109 #include <linux/delay.h>
 110 #include <linux/errno.h>
 111 #include <linux/init.h>
 112 #include <linux/netdevice.h>
 113 #include <linux/etherdevice.h>
 114 #include <linux/skbuff.h>
 115 #include <linux/slab.h>
 116 #include <linux/mca-legacy.h>
 117 #include <linux/spinlock.h>
 118 #include <linux/bitops.h>
 119
 120 #include <asm/system.h>
 121 #include <asm/io.h>
 122 #include <asm/irq.h>
 123
 124 #ifndef NET_DEBUG
 125 #define NET_DEBUG 4
 126 #endif
 127
 128 #include "eexpress.h"
 129
 130 #define EEXP_IO_EXTENT  16
 131
 132 /*
 133  * Private data declarations
 134  */
 135
 136 struct net_local
 137 {
 138         struct net_device_stats stats;
 139         unsigned long last_tx;       /* jiffies when last transmit started */
 140         unsigned long init_time;     /* jiffies when eexp_hw_init586 called */
 141         unsigned short rx_first;     /* first rx buf, same as RX_BUF_START */
 142         unsigned short rx_last;      /* last rx buf */
 143         unsigned short rx_ptr;       /* first rx buf to look at */
 144         unsigned short tx_head;      /* next free tx buf */
 145         unsigned short tx_reap;      /* first in-use tx buf */
 146         unsigned short tx_tail;      /* previous tx buf to tx_head */
 147         unsigned short tx_link;      /* last known-executing tx buf */
 148         unsigned short last_tx_restart;   /* set to tx_link when we
 149                                              restart the CU */
 150         unsigned char started;
 151         unsigned short rx_buf_start;
 152         unsigned short rx_buf_end;
 153         unsigned short num_tx_bufs;
 154         unsigned short num_rx_bufs;
 155         unsigned char width;         /* 0 for 16bit, 1 for 8bit */
 156         unsigned char was_promisc;
 157         unsigned char old_mc_count;
 158         spinlock_t lock;
 159 };
 160
 161 /* This is the code and data that is downloaded to the EtherExpress card's
 162  * memory at boot time.
 163  */
 164
 165 static unsigned short start_code[] = {
 166 /* 0x0000 */
 167         0x0001,                 /* ISCP: busy - cleared after reset */
 168         0x0008,0x0000,0x0000,   /* offset,address (lo,hi) of SCB */
 169
 170         0x0000,0x0000,          /* SCB: status, commands */
 171         0x0000,0x0000,          /* links to first command block,
 172                                    first receive descriptor */
 173         0x0000,0x0000,          /* CRC error, alignment error counts */
 174         0x0000,0x0000,          /* out of resources, overrun error counts */
 175
 176         0x0000,0x0000,          /* pad */
 177         0x0000,0x0000,
 178
 179 /* 0x20 -- start of 82586 CU program */
 180 #define CONF_LINK 0x20
 181         0x0000,Cmd_Config,
 182         0x0032,                 /* link to next command */
 183         0x080c,                 /* 12 bytes follow : fifo threshold=8 */
 184         0x2e40,                 /* don't rx bad frames
 185                                  * SRDY/ARDY => ext. sync. : preamble len=8
 186                                  * take addresses from data buffers
 187                                  * 6 bytes/address
 188                                  */
 189         0x6000,                 /* default backoff method & priority
 190                                  * interframe spacing = 0x60 */
 191         0xf200,                 /* slot time=0x200
 192                                  * max collision retry = 0xf */
 193 #define CONF_PROMISC  0x2e
 194         0x0000,                 /* no HDLC : normal CRC : enable broadcast
 195                                  * disable promiscuous/multicast modes */
 196         0x003c,                 /* minimum frame length = 60 octets) */
 197
 198         0x0000,Cmd_SetAddr,
 199         0x003e,                 /* link to next command */
 200 #define CONF_HWADDR  0x38
 201         0x0000,0x0000,0x0000,   /* hardware address placed here */
 202
 203         0x0000,Cmd_MCast,
 204         0x0076,                 /* link to next command */
 205 #define CONF_NR_MULTICAST 0x44
 206         0x0000,                 /* number of multicast addresses */
 207 #define CONF_MULTICAST 0x46
 208         0x0000, 0x0000, 0x0000, /* some addresses */
 209         0x0000, 0x0000, 0x0000,
 210         0x0000, 0x0000, 0x0000,
 211         0x0000, 0x0000, 0x0000,
 212         0x0000, 0x0000, 0x0000,
 213         0x0000, 0x0000, 0x0000,
 214         0x0000, 0x0000, 0x0000,
 215         0x0000, 0x0000, 0x0000,
 216
 217 #define CONF_DIAG_RESULT  0x76
 218         0x0000, Cmd_Diag,
 219         0x007c,                 /* link to next command */
 220
 221         0x0000,Cmd_TDR|Cmd_INT,
 222         0x0084,
 223 #define CONF_TDR_RESULT  0x82
 224         0x0000,
 225
 226         0x0000,Cmd_END|Cmd_Nop, /* end of configure sequence */
 227         0x0084                  /* dummy link */
 228 };
 229
 230 /* maps irq number to EtherExpress magic value */
 231 static char irqrmap[] = { 0,0,1,2,3,4,0,0,0,1,5,6,0,0,0,0 };
 232
 233 #ifdef CONFIG_MCA_LEGACY
 234 /* mapping of the first four bits of the second POS register */
 235 static unsigned short mca_iomap[] = {
 236         0x270, 0x260, 0x250, 0x240, 0x230, 0x220, 0x210, 0x200,
 237         0x370, 0x360, 0x350, 0x340, 0x330, 0x320, 0x310, 0x300
 238 };
 239 /* bits 5-7 of the second POS register */
 240 static char mca_irqmap[] = { 12, 9, 3, 4, 5, 10, 11, 15 };
 241 #endif
 242
 243 /*
 244  * Prototypes for Linux interface
 245  */
 246
 247 static int eexp_open(struct net_device *dev);
 248 static int eexp_close(struct net_device *dev);
 249 static void eexp_timeout(struct net_device *dev);
 250 static struct net_device_stats *eexp_stats(struct net_device *dev);
 251 static int eexp_xmit(struct sk_buff *buf, struct net_device *dev);
 252
 253 static irqreturn_t eexp_irq(int irq, void *dev_addr, struct pt_regs *regs);
 254 static void eexp_set_multicast(struct net_device *dev);
 255
 256 /*
 257  * Prototypes for hardware access functions
 258  */
 259
 260 static void eexp_hw_rx_pio(struct net_device *dev);
 261 static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf,
 262                        unsigned short len);
 263 static int eexp_hw_probe(struct net_device *dev,unsigned short ioaddr);
 264 static unsigned short eexp_hw_readeeprom(unsigned short ioaddr,
 265                                          unsigned char location);
 266
 267 static unsigned short eexp_hw_lasttxstat(struct net_device *dev);
 268 static void eexp_hw_txrestart(struct net_device *dev);
 269
 270 static void eexp_hw_txinit    (struct net_device *dev);
 271 static void eexp_hw_rxinit    (struct net_device *dev);
 272
 273 static void eexp_hw_init586   (struct net_device *dev);
 274 static void eexp_setup_filter (struct net_device *dev);
 275
 276 static char *eexp_ifmap[]={"AUI", "BNC", "RJ45"};
 277 enum eexp_iftype {AUI=0, BNC=1, TPE=2};
 278
 279 #define STARTED_RU      2
 280 #define STARTED_CU      1
 281
 282 /*
 283  * Primitive hardware access functions.
 284  */
 285
 286 static inline unsigned short scb_status(struct net_device *dev)
 287 {
 288         return inw(dev->base_addr + 0xc008);
 289 }
 290
 291 static inline unsigned short scb_rdcmd(struct net_device *dev)
 292 {
 293         return inw(dev->base_addr + 0xc00a);
 294 }
 295
 296 static inline void scb_command(struct net_device *dev, unsigned short cmd)
 297 {
 298         outw(cmd, dev->base_addr + 0xc00a);
 299 }
 300
 301 static inline void scb_wrcbl(struct net_device *dev, unsigned short val)
 302 {
 303         outw(val, dev->base_addr + 0xc00c);
 304 }
 305
 306 static inline void scb_wrrfa(struct net_device *dev, unsigned short val)
 307 {
 308         outw(val, dev->base_addr + 0xc00e);
 309 }
 310
 311 static inline void set_loopback(struct net_device *dev)
 312 {
 313         outb(inb(dev->base_addr + Config) | 2, dev->base_addr + Config);
 314 }
 315
 316 static inline void clear_loopback(struct net_device *dev)
 317 {
 318         outb(inb(dev->base_addr + Config) & ~2, dev->base_addr + Config);
 319 }
 320
 321 static inline unsigned short int SHADOW(short int addr)
 322 {
 323         addr &= 0x1f;
 324         if (addr > 0xf) addr += 0x3ff0;
 325         return addr + 0x4000;
 326 }
 327
 328 /*
 329  * Linux interface
 330  */
 331
 332 /*
 333  * checks for presence of EtherExpress card
 334  */
 335
 336 static int __init do_express_probe(struct net_device *dev)
 337 {
 338         unsigned short *port;
 339         static unsigned short ports[] = { 0x240,0x300,0x310,0x270,0x320,0x340,0 };
 340         unsigned short ioaddr = dev->base_addr;
 341         int dev_irq = dev->irq;
 342         int err;
 343
 344         SET_MODULE_OWNER(dev);
 345
 346         dev->if_port = 0xff; /* not set */
 347
 348 #ifdef CONFIG_MCA_LEGACY
 349         if (MCA_bus) {
 350                 int slot = 0;
 351
 352                 /*
 353                  * Only find one card at a time.  Subsequent calls
 354                  * will find others, however, proper multicard MCA
 355                  * probing and setup can't be done with the
 356                  * old-style Space.c init routines.  -- ASF
 357                  */
 358                 while (slot != MCA_NOTFOUND) {
 359                         int pos0, pos1;
 360
 361                         slot = mca_find_unused_adapter(0x628B, slot);
 362                         if (slot == MCA_NOTFOUND)
 363                                 break;
 364
 365                         pos0 = mca_read_stored_pos(slot, 2);
 366                         pos1 = mca_read_stored_pos(slot, 3);
 367                         ioaddr = mca_iomap[pos1&0xf];
 368
 369                         dev->irq = mca_irqmap[(pos1>>4)&0x7];
 370
 371                         /*
 372                          * XXX: Transciever selection is done
 373                          * differently on the MCA version.
 374                          * How to get it to select something
 375                          * other than external/AUI is currently
 376                          * unknown.  This code is just for looks. -- ASF
 377                          */
 378                         if ((pos0 & 0x7) == 0x1)
 379                                 dev->if_port = AUI;
 380                         else if ((pos0 & 0x7) == 0x5) {
 381                                 if (pos1 & 0x80)
 382                                         dev->if_port = BNC;
 383                                 else
 384                                         dev->if_port = TPE;
 385                         }
 386
 387                         mca_set_adapter_name(slot, "Intel EtherExpress 16 MCA");
 388                         mca_set_adapter_procfn(slot, NULL, dev);
 389                         mca_mark_as_used(slot);
 390
 391                         break;
 392                 }
 393         }
 394 #endif
 395         if (ioaddr&0xfe00) {
 396                 if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress"))
 397                         return -EBUSY;
 398                 err = eexp_hw_probe(dev,ioaddr);
 399                 release_region(ioaddr, EEXP_IO_EXTENT);
 400                 return err;
 401         } else if (ioaddr)
 402                 return -ENXIO;
 403
 404         for (port=&ports[0] ; *port ; port++ )
 405         {
 406                 unsigned short sum = 0;
 407                 int i;
 408                 if (!request_region(*port, EEXP_IO_EXTENT, "EtherExpress"))
 409                         continue;
 410                 for ( i=0 ; i<4 ; i++ )
 411                 {
 412                         unsigned short t;
 413                         t = inb(*port + ID_PORT);
 414                         sum |= (t>>4) << ((t & 0x03)<<2);
 415                 }
 416                 if (sum==0xbaba && !eexp_hw_probe(dev,*port)) {
 417                         release_region(*port, EEXP_IO_EXTENT);
 418                         return 0;
 419                 }
 420                 release_region(*port, EEXP_IO_EXTENT);
 421                 dev->irq = dev_irq;
 422         }
 423         return -ENODEV;
 424 }
 425
 426 #ifndef MODULE
 427 struct net_device * __init express_probe(int unit)
 428 {
 429         struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
 430         int err;
 431
 432         if (!dev)
 433                 return ERR_PTR(-ENOMEM);
 434
 435         sprintf(dev->name, "eth%d", unit);
 436         netdev_boot_setup_check(dev);
 437
 438         err = do_express_probe(dev);
 439         if (!err) {
 440                 err = register_netdev(dev);
 441                 if (!err)
 442                         return dev;
 443         }
 444         free_netdev(dev);
 445         return ERR_PTR(err);
 446 }
 447 #endif
 448
 449 /*
 450  * open and initialize the adapter, ready for use
 451  */
 452
 453 static int eexp_open(struct net_device *dev)
 454 {
 455         int ret;
 456         unsigned short ioaddr = dev->base_addr;
 457         struct net_local *lp = netdev_priv(dev);
 458
 459 #if NET_DEBUG > 6
 460         printk(KERN_DEBUG "%s: eexp_open()\n", dev->name);
 461 #endif
 462
 463         if (!dev->irq || !irqrmap[dev->irq])
 464                 return -ENXIO;
 465
 466         ret = request_irq(dev->irq,&eexp_irq,0,dev->name,dev);
 467         if (ret) return ret;
 468
 469         if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress")) {
 470                 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
 471                         , ioaddr);
 472                 goto err_out1;
 473         }
 474         if (!request_region(ioaddr+0x4000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
 475                 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
 476                         , ioaddr+0x4000);
 477                 goto err_out2;
 478         }
 479         if (!request_region(ioaddr+0x8000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
 480                 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
 481                         , ioaddr+0x8000);
 482                 goto err_out3;
 483         }
 484         if (!request_region(ioaddr+0xc000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
 485                 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
 486                         , ioaddr+0xc000);
 487                 goto err_out4;
 488         }
 489
 490         if (lp->width) {
 491                 printk("%s: forcing ASIC to 8-bit mode\n", dev->name);
 492                 outb(inb(dev->base_addr+Config)&~4, dev->base_addr+Config);
 493         }
 494
 495         eexp_hw_init586(dev);
 496         netif_start_queue(dev);
 497 #if NET_DEBUG > 6
 498         printk(KERN_DEBUG "%s: leaving eexp_open()\n", dev->name);
 499 #endif
 500         return 0;
 501
 502         err_out4:
 503                 release_region(ioaddr+0x8000, EEXP_IO_EXTENT);
 504         err_out3:
 505                 release_region(ioaddr+0x4000, EEXP_IO_EXTENT);
 506         err_out2:
 507                 release_region(ioaddr, EEXP_IO_EXTENT);
 508         err_out1:
 509                 free_irq(dev->irq, dev);
 510                 return -EBUSY;
 511 }
 512
 513 /*
 514  * close and disable the interface, leaving the 586 in reset.
 515  */
 516
 517 static int eexp_close(struct net_device *dev)
 518 {
 519         unsigned short ioaddr = dev->base_addr;
 520         struct net_local *lp = netdev_priv(dev);
 521
 522         int irq = dev->irq;
 523
 524         netif_stop_queue(dev);
 525
 526         outb(SIRQ_dis|irqrmap[irq],ioaddr+SET_IRQ);
 527         lp->started = 0;
 528         scb_command(dev, SCB_CUsuspend|SCB_RUsuspend);
 529         outb(0,ioaddr+SIGNAL_CA);
 530         free_irq(irq,dev);
 531         outb(i586_RST,ioaddr+EEPROM_Ctrl);
 532         release_region(ioaddr, EEXP_IO_EXTENT);
 533         release_region(ioaddr+0x4000, 16);
 534         release_region(ioaddr+0x8000, 16);
 535         release_region(ioaddr+0xc000, 16);
 536
 537         return 0;
 538 }
 539
 540 /*
 541  * Return interface stats
 542  */
 543
 544 static struct net_device_stats *eexp_stats(struct net_device *dev)
 545 {
 546         struct net_local *lp = netdev_priv(dev);
 547
 548         return &lp->stats;
 549 }
 550
 551 /*
 552  * This gets called when a higher level thinks we are broken.  Check that
 553  * nothing has become jammed in the CU.
 554  */
 555
 556 static void unstick_cu(struct net_device *dev)
 557 {
 558         struct net_local *lp = netdev_priv(dev);
 559         unsigned short ioaddr = dev->base_addr;
 560
 561         if (lp->started)
 562         {
 563                 if ((jiffies - dev->trans_start)>50)
 564                 {
 565                         if (lp->tx_link==lp->last_tx_restart)
 566                         {
 567                                 unsigned short boguscount=200,rsst;
 568                                 printk(KERN_WARNING "%s: Retransmit timed out, status %04x, resetting...\n",
 569                                        dev->name, scb_status(dev));
 570                                 eexp_hw_txinit(dev);
 571                                 lp->last_tx_restart = 0;
 572                                 scb_wrcbl(dev, lp->tx_link);
 573                                 scb_command(dev, SCB_CUstart);
 574                                 outb(0,ioaddr+SIGNAL_CA);
 575                                 while (!SCB_complete(rsst=scb_status(dev)))
 576                                 {
 577                                         if (!--boguscount)
 578                                         {
 579                                                 boguscount=200;
 580                                                 printk(KERN_WARNING "%s: Reset timed out status %04x, retrying...\n",
 581                                                        dev->name,rsst);
 582                                                 scb_wrcbl(dev, lp->tx_link);
 583                                                 scb_command(dev, SCB_CUstart);
 584                                                 outb(0,ioaddr+SIGNAL_CA);
 585                                         }
 586                                 }
 587                                 netif_wake_queue(dev);
 588                         }
 589                         else
 590                         {
 591                                 unsigned short status = scb_status(dev);
 592                                 if (SCB_CUdead(status))
 593                                 {
 594                                         unsigned short txstatus = eexp_hw_lasttxstat(dev);
 595                                         printk(KERN_WARNING "%s: Transmit timed out, CU not active status %04x %04x, restarting...\n",
 596                                                dev->name, status, txstatus);
 597                                         eexp_hw_txrestart(dev);
 598                                 }
 599                                 else
 600                                 {
 601                                         unsigned short txstatus = eexp_hw_lasttxstat(dev);
 602                                         if (netif_queue_stopped(dev) && !txstatus)
 603                                         {
 604                                                 printk(KERN_WARNING "%s: CU wedged, status %04x %04x, resetting...\n",
 605                                                        dev->name,status,txstatus);
 606                                                 eexp_hw_init586(dev);
 607                                                 netif_wake_queue(dev);
 608                                         }
 609                                         else
 610                                         {
 611                                                 printk(KERN_WARNING "%s: transmit timed out\n", dev->name);
 612                                         }
 613                                 }
 614                         }
 615                 }
 616         }
 617         else
 618         {
 619                 if ((jiffies-lp->init_time)>10)
 620                 {
 621                         unsigned short status = scb_status(dev);
 622                         printk(KERN_WARNING "%s: i82586 startup timed out, status %04x, resetting...\n",
 623                                dev->name, status);
 624                         eexp_hw_init586(dev);
 625                         netif_wake_queue(dev);
 626                 }
 627         }
 628 }
 629
 630 static void eexp_timeout(struct net_device *dev)
 631 {
 632         struct net_local *lp = netdev_priv(dev);
 633 #ifdef CONFIG_SMP
 634         unsigned long flags;
 635 #endif
 636         int status;
 637
 638         disable_irq(dev->irq);
 639
 640         /*
 641          *      Best would be to use synchronize_irq(); spin_lock() here
 642          *      lets make it work first..
 643          */
 644
 645 #ifdef CONFIG_SMP
 646         spin_lock_irqsave(&lp->lock, flags);
 647 #endif
 648
 649         status = scb_status(dev);
 650         unstick_cu(dev);
 651         printk(KERN_INFO "%s: transmit timed out, %s?\n", dev->name,
 652                (SCB_complete(status)?"lost interrupt":
 653                 "board on fire"));
 654         lp->stats.tx_errors++;
 655         lp->last_tx = jiffies;
 656         if (!SCB_complete(status)) {
 657                 scb_command(dev, SCB_CUabort);
 658                 outb(0,dev->base_addr+SIGNAL_CA);
 659         }
 660         netif_wake_queue(dev);
 661 #ifdef CONFIG_SMP
 662         spin_unlock_irqrestore(&lp->lock, flags);
 663 #endif
 664 }
 665
 666 /*
 667  * Called to transmit a packet, or to allow us to right ourselves
 668  * if the kernel thinks we've died.
 669  */
 670 static int eexp_xmit(struct sk_buff *buf, struct net_device *dev)
 671 {
 672         struct net_local *lp = netdev_priv(dev);
 673         short length = buf->len;
 674 #ifdef CONFIG_SMP
 675         unsigned long flags;
 676 #endif
 677
 678 #if NET_DEBUG > 6
 679         printk(KERN_DEBUG "%s: eexp_xmit()\n", dev->name);
 680 #endif
 681
 682         if (buf->len < ETH_ZLEN) {
 683                 buf = skb_padto(buf, ETH_ZLEN);
 684                 if (buf == NULL)
 685                         return 0;
 686                 length = ETH_ZLEN;
 687         }
 688
 689         disable_irq(dev->irq);
 690
 691         /*
 692          *      Best would be to use synchronize_irq(); spin_lock() here
 693          *      lets make it work first..
 694          */
 695
 696 #ifdef CONFIG_SMP
 697         spin_lock_irqsave(&lp->lock, flags);
 698 #endif
 699
 700         {
 701                 unsigned short *data = (unsigned short *)buf->data;
 702
 703                 lp->stats.tx_bytes += length;
 704
 705                 eexp_hw_tx_pio(dev,data,length);
 706         }
 707         dev_kfree_skb(buf);
 708 #ifdef CONFIG_SMP
 709         spin_unlock_irqrestore(&lp->lock, flags);
 710 #endif
 711         enable_irq(dev->irq);
 712         return 0;
 713 }
 714
 715 /*
 716  * Handle an EtherExpress interrupt
 717  * If we've finished initializing, start the RU and CU up.
 718  * If we've already started, reap tx buffers, handle any received packets,
 719  * check to make sure we've not become wedged.
 720  */
 721
 722 /*
 723  * Handle an EtherExpress interrupt
 724  * If we've finished initializing, start the RU and CU up.
 725  * If we've already started, reap tx buffers, handle any received packets,
 726  * check to make sure we've not become wedged.
 727  */
 728
 729 static unsigned short eexp_start_irq(struct net_device *dev,
 730                                      unsigned short status)
 731 {
 732         unsigned short ack_cmd = SCB_ack(status);
 733         struct net_local *lp = netdev_priv(dev);
 734         unsigned short ioaddr = dev->base_addr;
 735         if ((dev->flags & IFF_UP) && !(lp->started & STARTED_CU)) {
 736                 short diag_status, tdr_status;
 737                 while (SCB_CUstat(status)==2)
 738                         status = scb_status(dev);
 739 #if NET_DEBUG > 4
 740                 printk("%s: CU went non-active (status %04x)\n",
 741                        dev->name, status);
 742 #endif
 743
 744                 outw(CONF_DIAG_RESULT & ~31, ioaddr + SM_PTR);
 745                 diag_status = inw(ioaddr + SHADOW(CONF_DIAG_RESULT));
 746                 if (diag_status & 1<<11) {
 747                         printk(KERN_WARNING "%s: 82586 failed self-test\n",
 748                                dev->name);
 749                 } else if (!(diag_status & 1<<13)) {
 750                         printk(KERN_WARNING "%s: 82586 self-test failed to complete\n", dev->name);
 751                 }
 752
 753                 outw(CONF_TDR_RESULT & ~31, ioaddr + SM_PTR);
 754                 tdr_status = inw(ioaddr + SHADOW(CONF_TDR_RESULT));
 755                 if (tdr_status & (TDR_SHORT|TDR_OPEN)) {
 756                         printk(KERN_WARNING "%s: TDR reports cable %s at %d tick%s\n", dev->name, (tdr_status & TDR_SHORT)?"short":"broken", tdr_status & TDR_TIME, ((tdr_status & TDR_TIME) != 1) ? "s" : "");
 757                 }
 758                 else if (tdr_status & TDR_XCVRPROBLEM) {
 759                         printk(KERN_WARNING "%s: TDR reports transceiver problem\n", dev->name);
 760                 }
 761                 else if (tdr_status & TDR_LINKOK) {
 762 #if NET_DEBUG > 4
 763                         printk(KERN_DEBUG "%s: TDR reports link OK\n", dev->name);
 764 #endif
 765                 } else {
 766                         printk("%s: TDR is ga-ga (status %04x)\n", dev->name,
 767                                tdr_status);
 768                 }
 769
 770                 lp->started |= STARTED_CU;
 771                 scb_wrcbl(dev, lp->tx_link);
 772                 /* if the RU isn't running, start it now */
 773                 if (!(lp->started & STARTED_RU)) {
 774                         ack_cmd |= SCB_RUstart;
 775                         scb_wrrfa(dev, lp->rx_buf_start);
 776                         lp->rx_ptr = lp->rx_buf_start;
 777                         lp->started |= STARTED_RU;
 778                 }
 779                 ack_cmd |= SCB_CUstart | 0x2000;
 780         }
 781
 782         if ((dev->flags & IFF_UP) && !(lp->started & STARTED_RU) && SCB_RUstat(status)==4)
 783                 lp->started|=STARTED_RU;
 784
 785         return ack_cmd;
 786 }
 787
 788 static void eexp_cmd_clear(struct net_device *dev)
 789 {
 790         unsigned long int oldtime = jiffies;
 791         while (scb_rdcmd(dev) && ((jiffies-oldtime)<10));
 792         if (scb_rdcmd(dev)) {
 793                 printk("%s: command didn't clear\n", dev->name);
 794         }
 795 }
 796
 797 static irqreturn_t eexp_irq(int irq, void *dev_info, struct pt_regs *regs)
 798 {
 799         struct net_device *dev = dev_info;
 800         struct net_local *lp;
 801         unsigned short ioaddr,status,ack_cmd;
 802         unsigned short old_read_ptr, old_write_ptr;
 803
 804         if (dev==NULL)
 805         {
 806                 printk(KERN_WARNING "eexpress: irq %d for unknown device\n",
 807                        irq);
 808                 return IRQ_NONE;
 809         }
 810
 811         lp = netdev_priv(dev);
 812         ioaddr = dev->base_addr;
 813
 814         spin_lock(&lp->lock);
 815
 816         old_read_ptr = inw(ioaddr+READ_PTR);
 817         old_write_ptr = inw(ioaddr+WRITE_PTR);
 818
 819         outb(SIRQ_dis|irqrmap[irq],ioaddr+SET_IRQ);
 820
 821
 822         status = scb_status(dev);
 823
 824 #if NET_DEBUG > 4
 825         printk(KERN_DEBUG "%s: interrupt (status %x)\n", dev->name, status);
 826 #endif
 827
 828         if (lp->started == (STARTED_CU | STARTED_RU)) {
 829
 830                 do {
 831                         eexp_cmd_clear(dev);
 832
 833                         ack_cmd = SCB_ack(status);
 834                         scb_command(dev, ack_cmd);
 835                         outb(0,ioaddr+SIGNAL_CA);
 836
 837                         eexp_cmd_clear(dev);
 838
 839                         if (SCB_complete(status)) {
 840                                 if (!eexp_hw_lasttxstat(dev)) {
 841                                         printk("%s: tx interrupt but no status\n", dev->name);
 842                                 }
 843                         }
 844
 845                         if (SCB_rxdframe(status))
 846                                 eexp_hw_rx_pio(dev);
 847
 848                         status = scb_status(dev);
 849                 } while (status & 0xc000);
 850
 851                 if (SCB_RUdead(status))
 852                 {
 853                         printk(KERN_WARNING "%s: RU stopped: status %04x\n",
 854                                dev->name,status);
 855 #if 0
 856                         printk(KERN_WARNING "%s: cur_rfd=%04x, cur_rbd=%04x\n", dev->name, lp->cur_rfd, lp->cur_rbd);
 857                         outw(lp->cur_rfd, ioaddr+READ_PTR);
 858                         printk(KERN_WARNING "%s: [%04x]\n", dev->name, inw(ioaddr+DATAPORT));
 859                         outw(lp->cur_rfd+6, ioaddr+READ_PTR);
 860                         printk(KERN_WARNING "%s: rbd is %04x\n", dev->name, rbd= inw(ioaddr+DATAPORT));
 861                         outw(rbd, ioaddr+READ_PTR);
 862                         printk(KERN_WARNING "%s: [%04x %04x] ", dev->name, inw(ioaddr+DATAPORT), inw(ioaddr+DATAPORT));
 863                         outw(rbd+8, ioaddr+READ_PTR);
 864                         printk("[%04x]\n", inw(ioaddr+DATAPORT));
 865 #endif
 866                         lp->stats.rx_errors++;
 867 #if 1
 868                         eexp_hw_rxinit(dev);
 869 #else
 870                         lp->cur_rfd = lp->first_rfd;
 871 #endif
 872                         scb_wrrfa(dev, lp->rx_buf_start);
 873                         scb_command(dev, SCB_RUstart);
 874                         outb(0,ioaddr+SIGNAL_CA);
 875                 }
 876         } else {
 877                 if (status & 0x8000)
 878                         ack_cmd = eexp_start_irq(dev, status);
 879                 else
 880                         ack_cmd = SCB_ack(status);
 881                 scb_command(dev, ack_cmd);
 882                 outb(0,ioaddr+SIGNAL_CA);
 883         }
 884
 885         eexp_cmd_clear(dev);
 886
 887         outb(SIRQ_en|irqrmap[irq],ioaddr+SET_IRQ);
 888
 889 #if NET_DEBUG > 6
 890         printk("%s: leaving eexp_irq()\n", dev->name);
 891 #endif
 892         outw(old_read_ptr, ioaddr+READ_PTR);
 893         outw(old_write_ptr, ioaddr+WRITE_PTR);
 894
 895         spin_unlock(&lp->lock);
 896         return IRQ_HANDLED;
 897 }
 898
 899 /*
 900  * Hardware access functions
 901  */
 902
 903 /*
 904  * Set the cable type to use.
 905  */
 906
 907 static void eexp_hw_set_interface(struct net_device *dev)
 908 {
 909         unsigned char oldval = inb(dev->base_addr + 0x300e);
 910         oldval &= ~0x82;
 911         switch (dev->if_port) {
 912         case TPE:
 913                 oldval |= 0x2;
 914         case BNC:
 915                 oldval |= 0x80;
 916                 break;
 917         }
 918         outb(oldval, dev->base_addr+0x300e);
 919         mdelay(20);
 920 }
 921
 922 /*
 923  * Check all the receive buffers, and hand any received packets
 924  * to the upper levels. Basic sanity check on each frame
 925  * descriptor, though we don't bother trying to fix broken ones.
 926  */
 927
 928 static void eexp_hw_rx_pio(struct net_device *dev)
 929 {
 930         struct net_local *lp = netdev_priv(dev);
 931         unsigned short rx_block = lp->rx_ptr;
 932         unsigned short boguscount = lp->num_rx_bufs;
 933         unsigned short ioaddr = dev->base_addr;
 934         unsigned short status;
 935
 936 #if NET_DEBUG > 6
 937         printk(KERN_DEBUG "%s: eexp_hw_rx()\n", dev->name);
 938 #endif
 939
 940         do {
 941                 unsigned short rfd_cmd, rx_next, pbuf, pkt_len;
 942
 943                 outw(rx_block, ioaddr + READ_PTR);
 944                 status = inw(ioaddr + DATAPORT);
 945
 946                 if (FD_Done(status))
 947                 {
 948                         rfd_cmd = inw(ioaddr + DATAPORT);
 949                         rx_next = inw(ioaddr + DATAPORT);
 950                         pbuf = inw(ioaddr + DATAPORT);
 951
 952                         outw(pbuf, ioaddr + READ_PTR);
 953                         pkt_len = inw(ioaddr + DATAPORT);
 954
 955                         if (rfd_cmd!=0x0000)
 956                         {
 957                                 printk(KERN_WARNING "%s: rfd_cmd not zero:0x%04x\n",
 958                                        dev->name, rfd_cmd);
 959                                 continue;
 960                         }
 961                         else if (pbuf!=rx_block+0x16)
 962                         {
 963                                 printk(KERN_WARNING "%s: rfd and rbd out of sync 0x%04x 0x%04x\n",
 964                                        dev->name, rx_block+0x16, pbuf);
 965                                 continue;
 966                         }
 967                         else if ((pkt_len & 0xc000)!=0xc000)
 968                         {
 969                                 printk(KERN_WARNING "%s: EOF or F not set on received buffer (%04x)\n",
 970                                        dev->name, pkt_len & 0xc000);
 971                                 continue;
 972                         }
 973                         else if (!FD_OK(status))
 974                         {
 975                                 lp->stats.rx_errors++;
 976                                 if (FD_CRC(status))
 977                                         lp->stats.rx_crc_errors++;
 978                                 if (FD_Align(status))
 979                                         lp->stats.rx_frame_errors++;
 980                                 if (FD_Resrc(status))
 981                                         lp->stats.rx_fifo_errors++;
 982                                 if (FD_DMA(status))
 983                                         lp->stats.rx_over_errors++;
 984                                 if (FD_Short(status))
 985                                         lp->stats.rx_length_errors++;
 986                         }
 987                         else
 988                         {
 989                                 struct sk_buff *skb;
 990                                 pkt_len &= 0x3fff;
 991                                 skb = dev_alloc_skb(pkt_len+16);
 992                                 if (skb == NULL)
 993                                 {
 994                                         printk(KERN_WARNING "%s: Memory squeeze, dropping packet\n",dev->name);
 995                                         lp->stats.rx_dropped++;
 996                                         break;
 997                                 }
 998                                 skb->dev = dev;
 999                                 skb_reserve(skb, 2);
1000                                 outw(pbuf+10, ioaddr+READ_PTR);
1001                                 insw(ioaddr+DATAPORT, skb_put(skb,pkt_len),(pkt_len+1)>>1);
1002                                 skb->protocol = eth_type_trans(skb,dev);
1003                                 netif_rx(skb);
1004                                 dev->last_rx = jiffies;
1005                                 lp->stats.rx_packets++;
1006                                 lp->stats.rx_bytes += pkt_len;
1007                         }
1008                         outw(rx_block, ioaddr+WRITE_PTR);
1009                         outw(0, ioaddr+DATAPORT);
1010                         outw(0, ioaddr+DATAPORT);
1011                         rx_block = rx_next;
1012                 }
1013         } while (FD_Done(status) && boguscount--);
1014         lp->rx_ptr = rx_block;
1015 }
1016
1017 /*
1018  * Hand a packet to the card for transmission
1019  * If we get here, we MUST have already checked
1020  * to make sure there is room in the transmit
1021  * buffer region.
1022  */
1023
1024 static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf,
1025                        unsigned short len)
1026 {
1027         struct net_local *lp = netdev_priv(dev);
1028         unsigned short ioaddr = dev->base_addr;
1029
1030         if (LOCKUP16 || lp->width) {
1031                 /* Stop the CU so that there is no chance that it
1032                    jumps off to a bogus address while we are writing the
1033                    pointer to the next transmit packet in 8-bit mode --
1034                    this eliminates the "CU wedged" errors in 8-bit mode.
1035                    (Zoltan Szilagyi 10-12-96) */
1036                 scb_command(dev, SCB_CUsuspend);
1037                 outw(0xFFFF, ioaddr+SIGNAL_CA);
1038         }
1039
1040         outw(lp->tx_head, ioaddr + WRITE_PTR);
1041
1042         outw(0x0000, ioaddr + DATAPORT);
1043         outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT);
1044         outw(lp->tx_head+0x08, ioaddr + DATAPORT);
1045         outw(lp->tx_head+0x0e, ioaddr + DATAPORT);
1046
1047         outw(0x0000, ioaddr + DATAPORT);
1048         outw(0x0000, ioaddr + DATAPORT);
1049         outw(lp->tx_head+0x08, ioaddr + DATAPORT);
1050
1051         outw(0x8000|len, ioaddr + DATAPORT);
1052         outw(-1, ioaddr + DATAPORT);
1053         outw(lp->tx_head+0x16, ioaddr + DATAPORT);
1054         outw(0, ioaddr + DATAPORT);
1055
1056         outsw(ioaddr + DATAPORT, buf, (len+1)>>1);
1057
1058         outw(lp->tx_tail+0xc, ioaddr + WRITE_PTR);
1059         outw(lp->tx_head, ioaddr + DATAPORT);
1060
1061         dev->trans_start = jiffies;
1062         lp->tx_tail = lp->tx_head;
1063         if (lp->tx_head==TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE))
1064                 lp->tx_head = TX_BUF_START;
1065         else
1066                 lp->tx_head += TX_BUF_SIZE;
1067         if (lp->tx_head != lp->tx_reap)
1068                 netif_wake_queue(dev);
1069
1070         if (LOCKUP16 || lp->width) {
1071                 /* Restart the CU so that the packet can actually
1072                    be transmitted. (Zoltan Szilagyi 10-12-96) */
1073                 scb_command(dev, SCB_CUresume);
1074                 outw(0xFFFF, ioaddr+SIGNAL_CA);
1075         }
1076
1077         lp->stats.tx_packets++;
1078         lp->last_tx = jiffies;
1079 }
1080
1081 /*
1082  * Sanity check the suspected EtherExpress card
1083  * Read hardware address, reset card, size memory and initialize buffer
1084  * memory pointers. These are held in dev->priv, in case someone has more
1085  * than one card in a machine.
1086  */
1087
1088 static int __init eexp_hw_probe(struct net_device *dev, unsigned short ioaddr)
1089 {
1090         unsigned short hw_addr[3];
1091         unsigned char buswidth;
1092         unsigned int memory_size;
1093         int i;
1094         unsigned short xsum = 0;
1095         struct net_local *lp = netdev_priv(dev);
1096
1097         printk("%s: EtherExpress 16 at %#x ",dev->name,ioaddr);
1098
1099         outb(ASIC_RST, ioaddr+EEPROM_Ctrl);
1100         outb(0, ioaddr+EEPROM_Ctrl);
1101         udelay(500);
1102         outb(i586_RST, ioaddr+EEPROM_Ctrl);
1103
1104         hw_addr[0] = eexp_hw_readeeprom(ioaddr,2);
1105         hw_addr[1] = eexp_hw_readeeprom(ioaddr,3);
1106         hw_addr[2] = eexp_hw_readeeprom(ioaddr,4);
1107
1108         /* Standard Address or Compaq LTE Address */
1109         if (!((hw_addr[2]==0x00aa && ((hw_addr[1] & 0xff00)==0x0000)) ||
1110               (hw_addr[2]==0x0080 && ((hw_addr[1] & 0xff00)==0x5F00))))
1111         {
1112                 printk(" rejected: invalid address %04x%04x%04x\n",
1113                         hw_addr[2],hw_addr[1],hw_addr[0]);
1114                 return -ENODEV;
1115         }
1116
1117         /* Calculate the EEPROM checksum.  Carry on anyway if it's bad,
1118          * though.
1119          */
1120         for (i = 0; i < 64; i++)
1121                 xsum += eexp_hw_readeeprom(ioaddr, i);
1122         if (xsum != 0xbaba)
1123                 printk(" (bad EEPROM xsum 0x%02x)", xsum);
1124
1125         dev->base_addr = ioaddr;
1126         for ( i=0 ; i<6 ; i++ )
1127                 dev->dev_addr[i] = ((unsigned char *)hw_addr)[5-i];
1128
1129         {
1130                 static char irqmap[]={0, 9, 3, 4, 5, 10, 11, 0};
1131                 unsigned short setupval = eexp_hw_readeeprom(ioaddr,0);
1132
1133                 /* Use the IRQ from EEPROM if none was given */
1134                 if (!dev->irq)
1135                         dev->irq = irqmap[setupval>>13];
1136
1137                 if (dev->if_port == 0xff) {
1138                         dev->if_port = !(setupval & 0x1000) ? AUI :
1139                                 eexp_hw_readeeprom(ioaddr,5) & 0x1 ? TPE : BNC;
1140                 }
1141
1142                 buswidth = !((setupval & 0x400) >> 10);
1143         }
1144
1145         memset(lp, 0, sizeof(struct net_local));
1146         spin_lock_init(&lp->lock);
1147
1148         printk("(IRQ %d, %s connector, %d-bit bus", dev->irq,
1149                eexp_ifmap[dev->if_port], buswidth?8:16);
1150
1151         if (!request_region(dev->base_addr + 0x300e, 1, "EtherExpress"))
1152                 return -EBUSY;
1153
1154         eexp_hw_set_interface(dev);
1155
1156         release_region(dev->base_addr + 0x300e, 1);
1157
1158         /* Find out how much RAM we have on the card */
1159         outw(0, dev->base_addr + WRITE_PTR);
1160         for (i = 0; i < 32768; i++)
1161                 outw(0, dev->base_addr + DATAPORT);
1162
1163         for (memory_size = 0; memory_size < 64; memory_size++)
1164         {
1165                 outw(memory_size<<10, dev->base_addr + READ_PTR);
1166                 if (inw(dev->base_addr+DATAPORT))
1167                         break;
1168                 outw(memory_size<<10, dev->base_addr + WRITE_PTR);
1169                 outw(memory_size | 0x5000, dev->base_addr+DATAPORT);
1170                 outw(memory_size<<10, dev->base_addr + READ_PTR);
1171                 if (inw(dev->base_addr+DATAPORT) != (memory_size | 0x5000))
1172                         break;
1173         }
1174
1175         /* Sort out the number of buffers.  We may have 16, 32, 48 or 64k
1176          * of RAM to play with.
1177          */
1178         lp->num_tx_bufs = 4;
1179         lp->rx_buf_end = 0x3ff6;
1180         switch (memory_size)
1181         {
1182         case 64:
1183                 lp->rx_buf_end += 0x4000;
1184         case 48:
1185                 lp->num_tx_bufs += 4;
1186                 lp->rx_buf_end += 0x4000;
1187         case 32:
1188                 lp->rx_buf_end += 0x4000;
1189         case 16:
1190                 printk(", %dk RAM)\n", memory_size);
1191                 break;
1192         default:
1193                 printk(") bad memory size (%dk).\n", memory_size);
1194                 return -ENODEV;
1195                 break;
1196         }
1197
1198         lp->rx_buf_start = TX_BUF_START + (lp->num_tx_bufs*TX_BUF_SIZE);
1199         lp->width = buswidth;
1200
1201         dev->open = eexp_open;
1202         dev->stop = eexp_close;
1203         dev->hard_start_xmit = eexp_xmit;
1204         dev->get_stats = eexp_stats;
1205         dev->set_multicast_list = &eexp_set_multicast;
1206         dev->tx_timeout = eexp_timeout;
1207         dev->watchdog_timeo = 2*HZ;
1208         return 0;
1209 }
1210
1211 /*
1212  * Read a word from the EtherExpress on-board serial EEPROM.
1213  * The EEPROM contains 64 words of 16 bits.
1214  */
1215 static unsigned short __init eexp_hw_readeeprom(unsigned short ioaddr,
1216                                                     unsigned char location)
1217 {
1218         unsigned short cmd = 0x180|(location&0x7f);
1219         unsigned short rval = 0,wval = EC_CS|i586_RST;
1220         int i;
1221
1222         outb(EC_CS|i586_RST,ioaddr+EEPROM_Ctrl);
1223         for (i=0x100 ; i ; i>>=1 )
1224         {
1225                 if (cmd&i)
1226                         wval |= EC_Wr;
1227                 else
1228                         wval &= ~EC_Wr;
1229
1230                 outb(wval,ioaddr+EEPROM_Ctrl);
1231                 outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
1232                 eeprom_delay();
1233                 outb(wval,ioaddr+EEPROM_Ctrl);
1234                 eeprom_delay();
1235         }
1236         wval &= ~EC_Wr;
1237         outb(wval,ioaddr+EEPROM_Ctrl);
1238         for (i=0x8000 ; i ; i>>=1 )
1239         {
1240                 outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
1241                 eeprom_delay();
1242                 if (inb(ioaddr+EEPROM_Ctrl)&EC_Rd)
1243                         rval |= i;
1244                 outb(wval,ioaddr+EEPROM_Ctrl);
1245                 eeprom_delay();
1246         }
1247         wval &= ~EC_CS;
1248         outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
1249         eeprom_delay();
1250         outb(wval,ioaddr+EEPROM_Ctrl);
1251         eeprom_delay();
1252         return rval;
1253 }
1254
1255 /*
1256  * Reap tx buffers and return last transmit status.
1257  * if ==0 then either:
1258  *    a) we're not transmitting anything, so why are we here?
1259  *    b) we've died.
1260  * otherwise, Stat_Busy(return) means we've still got some packets
1261  * to transmit, Stat_Done(return) means our buffers should be empty
1262  * again
1263  */
1264
1265 static unsigned short eexp_hw_lasttxstat(struct net_device *dev)
1266 {
1267         struct net_local *lp = netdev_priv(dev);
1268         unsigned short tx_block = lp->tx_reap;
1269         unsigned short status;
1270
1271         if (!netif_queue_stopped(dev) && lp->tx_head==lp->tx_reap)
1272                 return 0x0000;
1273
1274         do
1275         {
1276                 outw(tx_block & ~31, dev->base_addr + SM_PTR);
1277                 status = inw(dev->base_addr + SHADOW(tx_block));
1278                 if (!Stat_Done(status))
1279                 {
1280                         lp->tx_link = tx_block;
1281                         return status;
1282                 }
1283                 else
1284                 {
1285                         lp->last_tx_restart = 0;
1286                         lp->stats.collisions += Stat_NoColl(status);
1287                         if (!Stat_OK(status))
1288                         {
1289                                 char *whatsup = NULL;
1290                                 lp->stats.tx_errors++;
1291                                 if (Stat_Abort(status))
1292                                         lp->stats.tx_aborted_errors++;
1293                                 if (Stat_TNoCar(status)) {
1294                                         whatsup = "aborted, no carrier";
1295                                         lp->stats.tx_carrier_errors++;
1296                                 }
1297                                 if (Stat_TNoCTS(status)) {
1298                                         whatsup = "aborted, lost CTS";
1299                                         lp->stats.tx_carrier_errors++;
1300                                 }
1301                                 if (Stat_TNoDMA(status)) {
1302                                         whatsup = "FIFO underran";
1303                                         lp->stats.tx_fifo_errors++;
1304                                 }
1305                                 if (Stat_TXColl(status)) {
1306                                         whatsup = "aborted, too many collisions";
1307                                         lp->stats.tx_aborted_errors++;
1308                                 }
1309                                 if (whatsup)
1310                                         printk(KERN_INFO "%s: transmit %s\n",
1311                                                dev->name, whatsup);
1312                         }
1313                         else
1314                                 lp->stats.tx_packets++;
1315                 }
1316                 if (tx_block == TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE))
1317                         lp->tx_reap = tx_block = TX_BUF_START;
1318                 else
1319                         lp->tx_reap = tx_block += TX_BUF_SIZE;
1320                 netif_wake_queue(dev);
1321         }
1322         while (lp->tx_reap != lp->tx_head);
1323
1324         lp->tx_link = lp->tx_tail + 0x08;
1325
1326         return status;
1327 }
1328
1329 /*
1330  * This should never happen. It is called when some higher routine detects
1331  * that the CU has stopped, to try to restart it from the last packet we knew
1332  * we were working on, or the idle loop if we had finished for the time.
1333  */
1334
1335 static void eexp_hw_txrestart(struct net_device *dev)
1336 {
1337         struct net_local *lp = netdev_priv(dev);
1338         unsigned short ioaddr = dev->base_addr;
1339
1340         lp->last_tx_restart = lp->tx_link;
1341         scb_wrcbl(dev, lp->tx_link);
1342         scb_command(dev, SCB_CUstart);
1343         outb(0,ioaddr+SIGNAL_CA);
1344
1345         {
1346                 unsigned short boguscount=50,failcount=5;
1347                 while (!scb_status(dev))
1348                 {
1349                         if (!--boguscount)
1350                         {
1351                                 if (--failcount)
1352                                 {
1353                                         printk(KERN_WARNING "%s: CU start timed out, status %04x, cmd %04x\n", dev->name, scb_status(dev), scb_rdcmd(dev));
1354                                         scb_wrcbl(dev, lp->tx_link);
1355                                         scb_command(dev, SCB_CUstart);
1356                                         outb(0,ioaddr+SIGNAL_CA);
1357                                         boguscount = 100;
1358                                 }
1359                                 else
1360                                 {
1361                                         printk(KERN_WARNING "%s: Failed to restart CU, resetting board...\n",dev->name);
1362                                         eexp_hw_init586(dev);
1363                                         netif_wake_queue(dev);
1364                                         return;
1365                                 }
1366                         }
1367                 }
1368         }
1369 }
1370
1371 /*
1372  * Writes down the list of transmit buffers into card memory.  Each
1373  * entry consists of an 82586 transmit command, followed by a jump
1374  * pointing to itself.  When we want to transmit a packet, we write
1375  * the data into the appropriate transmit buffer and then modify the
1376  * preceding jump to point at the new transmit command.  This means that
1377  * the 586 command unit is continuously active.
1378  */
1379
1380 static void eexp_hw_txinit(struct net_device *dev)
1381 {
1382         struct net_local *lp = netdev_priv(dev);
1383         unsigned short tx_block = TX_BUF_START;
1384         unsigned short curtbuf;
1385         unsigned short ioaddr = dev->base_addr;
1386
1387         for ( curtbuf=0 ; curtbuf<lp->num_tx_bufs ; curtbuf++ )
1388         {
1389                 outw(tx_block, ioaddr + WRITE_PTR);
1390
1391                 outw(0x0000, ioaddr + DATAPORT);
1392                 outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT);
1393                 outw(tx_block+0x08, ioaddr + DATAPORT);
1394                 outw(tx_block+0x0e, ioaddr + DATAPORT);
1395
1396                 outw(0x0000, ioaddr + DATAPORT);
1397                 outw(0x0000, ioaddr + DATAPORT);
1398                 outw(tx_block+0x08, ioaddr + DATAPORT);
1399
1400                 outw(0x8000, ioaddr + DATAPORT);
1401                 outw(-1, ioaddr + DATAPORT);
1402                 outw(tx_block+0x16, ioaddr + DATAPORT);
1403                 outw(0x0000, ioaddr + DATAPORT);
1404
1405                 tx_block += TX_BUF_SIZE;
1406         }
1407         lp->tx_head = TX_BUF_START;
1408         lp->tx_reap = TX_BUF_START;
1409         lp->tx_tail = tx_block - TX_BUF_SIZE;
1410         lp->tx_link = lp->tx_tail + 0x08;
1411         lp->rx_buf_start = tx_block;
1412
1413 }
1414
1415 /*
1416  * Write the circular list of receive buffer descriptors to card memory.
1417  * The end of the list isn't marked, which means that the 82586 receive
1418  * unit will loop until buffers become available (this avoids it giving us
1419  * "out of resources" messages).
1420  */
1421
1422 static void eexp_hw_rxinit(struct net_device *dev)
1423 {
1424         struct net_local *lp = netdev_priv(dev);
1425         unsigned short rx_block = lp->rx_buf_start;
1426         unsigned short ioaddr = dev->base_addr;
1427
1428         lp->num_rx_bufs = 0;
1429         lp->rx_first = lp->rx_ptr = rx_block;
1430         do
1431         {
1432                 lp->num_rx_bufs++;
1433
1434                 outw(rx_block, ioaddr + WRITE_PTR);
1435
1436                 outw(0, ioaddr + DATAPORT);  outw(0, ioaddr+DATAPORT);
1437                 outw(rx_block + RX_BUF_SIZE, ioaddr+DATAPORT);
1438                 outw(0xffff, ioaddr+DATAPORT);
1439
1440                 outw(0x0000, ioaddr+DATAPORT);
1441                 outw(0xdead, ioaddr+DATAPORT);
1442                 outw(0xdead, ioaddr+DATAPORT);
1443                 outw(0xdead, ioaddr+DATAPORT);
1444                 outw(0xdead, ioaddr+DATAPORT);
1445                 outw(0xdead, ioaddr+DATAPORT);
1446                 outw(0xdead, ioaddr+DATAPORT);
1447
1448                 outw(0x0000, ioaddr+DATAPORT);
1449                 outw(rx_block + RX_BUF_SIZE + 0x16, ioaddr+DATAPORT);
1450                 outw(rx_block + 0x20, ioaddr+DATAPORT);
1451                 outw(0, ioaddr+DATAPORT);
1452                 outw(RX_BUF_SIZE-0x20, ioaddr+DATAPORT);
1453
1454                 lp->rx_last = rx_block;
1455                 rx_block += RX_BUF_SIZE;
1456         } while (rx_block <= lp->rx_buf_end-RX_BUF_SIZE);
1457
1458
1459         /* Make first Rx frame descriptor point to first Rx buffer
1460            descriptor */
1461         outw(lp->rx_first + 6, ioaddr+WRITE_PTR);
1462         outw(lp->rx_first + 0x16, ioaddr+DATAPORT);
1463
1464         /* Close Rx frame descriptor ring */
1465         outw(lp->rx_last + 4, ioaddr+WRITE_PTR);
1466         outw(lp->rx_first, ioaddr+DATAPORT);
1467
1468         /* Close Rx buffer descriptor ring */
1469         outw(lp->rx_last + 0x16 + 2, ioaddr+WRITE_PTR);
1470         outw(lp->rx_first + 0x16, ioaddr+DATAPORT);
1471
1472 }
1473
1474 /*
1475  * Un-reset the 586, and start the configuration sequence. We don't wait for
1476  * this to finish, but allow the interrupt handler to start the CU and RU for
1477  * us.  We can't start the receive/transmission system up before we know that
1478  * the hardware is configured correctly.
1479  */
1480
1481 static void eexp_hw_init586(struct net_device *dev)
1482 {
1483         struct net_local *lp = netdev_priv(dev);
1484         unsigned short ioaddr = dev->base_addr;
1485         int i;
1486
1487 #if NET_DEBUG > 6
1488         printk("%s: eexp_hw_init586()\n", dev->name);
1489 #endif
1490
1491         lp->started = 0;
1492
1493         set_loopback(dev);
1494
1495         outb(SIRQ_dis|irqrmap[dev->irq],ioaddr+SET_IRQ);
1496
1497         /* Download the startup code */
1498         outw(lp->rx_buf_end & ~31, ioaddr + SM_PTR);
1499         outw(lp->width?0x0001:0x0000, ioaddr + 0x8006);
1500         outw(0x0000, ioaddr + 0x8008);
1501         outw(0x0000, ioaddr + 0x800a);
1502         outw(0x0000, ioaddr + 0x800c);
1503         outw(0x0000, ioaddr + 0x800e);
1504
1505         for (i = 0; i < (sizeof(start_code)); i+=32) {
1506                 int j;
1507                 outw(i, ioaddr + SM_PTR);
1508                 for (j = 0; j < 16; j+=2)
1509                         outw(start_code[(i+j)/2],
1510                              ioaddr+0x4000+j);
1511                 for (j = 0; j < 16; j+=2)
1512                         outw(start_code[(i+j+16)/2],
1513                              ioaddr+0x8000+j);
1514         }
1515
1516         /* Do we want promiscuous mode or multicast? */
1517         outw(CONF_PROMISC & ~31, ioaddr+SM_PTR);
1518         i = inw(ioaddr+SHADOW(CONF_PROMISC));
1519         outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1),
1520              ioaddr+SHADOW(CONF_PROMISC));
1521         lp->was_promisc = dev->flags & IFF_PROMISC;
1522 #if 0
1523         eexp_setup_filter(dev);
1524 #endif
1525
1526         /* Write our hardware address */
1527         outw(CONF_HWADDR & ~31, ioaddr+SM_PTR);
1528         outw(((unsigned short *)dev->dev_addr)[0], ioaddr+SHADOW(CONF_HWADDR));
1529         outw(((unsigned short *)dev->dev_addr)[1],
1530              ioaddr+SHADOW(CONF_HWADDR+2));
1531         outw(((unsigned short *)dev->dev_addr)[2],
1532              ioaddr+SHADOW(CONF_HWADDR+4));
1533
1534         eexp_hw_txinit(dev);
1535         eexp_hw_rxinit(dev);
1536
1537         outb(0,ioaddr+EEPROM_Ctrl);
1538         mdelay(5);
1539
1540         scb_command(dev, 0xf000);
1541         outb(0,ioaddr+SIGNAL_CA);
1542
1543         outw(0, ioaddr+SM_PTR);
1544
1545         {
1546                 unsigned short rboguscount=50,rfailcount=5;
1547                 while (inw(ioaddr+0x4000))
1548                 {
1549                         if (!--rboguscount)
1550                         {
1551                                 printk(KERN_WARNING "%s: i82586 reset timed out, kicking...\n",
1552                                         dev->name);
1553                                 scb_command(dev, 0);
1554                                 outb(0,ioaddr+SIGNAL_CA);
1555                                 rboguscount = 100;
1556                                 if (!--rfailcount)
1557                                 {
1558                                         printk(KERN_WARNING "%s: i82586 not responding, giving up.\n",
1559                                                 dev->name);
1560                                         return;
1561                                 }
1562                         }
1563                 }
1564         }
1565
1566         scb_wrcbl(dev, CONF_LINK);
1567         scb_command(dev, 0xf000|SCB_CUstart);
1568         outb(0,ioaddr+SIGNAL_CA);
1569
1570         {
1571                 unsigned short iboguscount=50,ifailcount=5;
1572                 while (!scb_status(dev))
1573                 {
1574                         if (!--iboguscount)
1575                         {
1576                                 if (--ifailcount)
1577                                 {
1578                                         printk(KERN_WARNING "%s: i82586 initialization timed out, status %04x, cmd %04x\n",
1579                                                 dev->name, scb_status(dev), scb_rdcmd(dev));
1580                                         scb_wrcbl(dev, CONF_LINK);
1581                                         scb_command(dev, 0xf000|SCB_CUstart);
1582                                         outb(0,ioaddr+SIGNAL_CA);
1583                                         iboguscount = 100;
1584                                 }
1585                                 else
1586                                 {
1587                                         printk(KERN_WARNING "%s: Failed to initialize i82586, giving up.\n",dev->name);
1588                                         return;
1589                                 }
1590                         }
1591                 }
1592         }
1593
1594         clear_loopback(dev);
1595         outb(SIRQ_en|irqrmap[dev->irq],ioaddr+SET_IRQ);
1596
1597         lp->init_time = jiffies;
1598 #if NET_DEBUG > 6
1599         printk("%s: leaving eexp_hw_init586()\n", dev->name);
1600 #endif
1601         return;
1602 }
1603
1604 static void eexp_setup_filter(struct net_device *dev)
1605 {
1606         struct dev_mc_list *dmi = dev->mc_list;
1607         unsigned short ioaddr = dev->base_addr;
1608         int count = dev->mc_count;
1609         int i;
1610         if (count > 8) {
1611                 printk(KERN_INFO "%s: too many multicast addresses (%d)\n",
1612                        dev->name, count);
1613                 count = 8;
1614         }
1615
1616         outw(CONF_NR_MULTICAST & ~31, ioaddr+SM_PTR);
1617         outw(count, ioaddr+SHADOW(CONF_NR_MULTICAST));
1618         for (i = 0; i < count; i++) {
1619                 unsigned short *data = (unsigned short *)dmi->dmi_addr;
1620                 if (!dmi) {
1621                         printk(KERN_INFO "%s: too few multicast addresses\n", dev->name);
1622                         break;
1623                 }
1624                 if (dmi->dmi_addrlen != ETH_ALEN) {
1625                         printk(KERN_INFO "%s: invalid multicast address length given.\n", dev->name);
1626                         continue;
1627                 }
1628                 outw((CONF_MULTICAST+(6*i)) & ~31, ioaddr+SM_PTR);
1629                 outw(data[0], ioaddr+SHADOW(CONF_MULTICAST+(6*i)));
1630                 outw((CONF_MULTICAST+(6*i)+2) & ~31, ioaddr+SM_PTR);
1631                 outw(data[1], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+2));
1632                 outw((CONF_MULTICAST+(6*i)+4) & ~31, ioaddr+SM_PTR);
1633                 outw(data[2], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+4));
1634         }
1635 }
1636
1637 /*
1638  * Set or clear the multicast filter for this adaptor.
1639  */
1640 static void
1641 eexp_set_multicast(struct net_device *dev)
1642 {
1643         unsigned short ioaddr = dev->base_addr;
1644         struct net_local *lp = netdev_priv(dev);
1645         int kick = 0, i;
1646         if ((dev->flags & IFF_PROMISC) != lp->was_promisc) {
1647                 outw(CONF_PROMISC & ~31, ioaddr+SM_PTR);
1648                 i = inw(ioaddr+SHADOW(CONF_PROMISC));
1649                 outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1),
1650                      ioaddr+SHADOW(CONF_PROMISC));
1651                 lp->was_promisc = dev->flags & IFF_PROMISC;
1652                 kick = 1;
1653         }
1654         if (!(dev->flags & IFF_PROMISC)) {
1655                 eexp_setup_filter(dev);
1656                 if (lp->old_mc_count != dev->mc_count) {
1657                         kick = 1;
1658                         lp->old_mc_count = dev->mc_count;
1659                 }
1660         }
1661         if (kick) {
1662                 unsigned long oj;
1663                 scb_command(dev, SCB_CUsuspend);
1664                 outb(0, ioaddr+SIGNAL_CA);
1665                 outb(0, ioaddr+SIGNAL_CA);
1666 #if 0
1667                 printk("%s: waiting for CU to go suspended\n", dev->name);
1668 #endif
1669                 oj = jiffies;
1670                 while ((SCB_CUstat(scb_status(dev)) == 2) &&
1671                        ((jiffies-oj) < 2000));
1672                 if (SCB_CUstat(scb_status(dev)) == 2)
1673                         printk("%s: warning, CU didn't stop\n", dev->name);
1674                 lp->started &= ~(STARTED_CU);
1675                 scb_wrcbl(dev, CONF_LINK);
1676                 scb_command(dev, SCB_CUstart);
1677                 outb(0, ioaddr+SIGNAL_CA);
1678         }
1679 }
1680
1681
1682 /*
1683  * MODULE stuff
1684  */
1685
1686 #ifdef MODULE
1687
1688 #define EEXP_MAX_CARDS     4    /* max number of cards to support */
1689
1690 static struct net_device *dev_eexp[EEXP_MAX_CARDS];
1691 static int irq[EEXP_MAX_CARDS];
1692 static int io[EEXP_MAX_CARDS];
1693
1694 module_param_array(io, int, NULL, 0);
1695 module_param_array(irq, int, NULL, 0);
1696 MODULE_PARM_DESC(io, "EtherExpress 16 I/O base address(es)");
1697 MODULE_PARM_DESC(irq, "EtherExpress 16 IRQ number(s)");
1698 MODULE_LICENSE("GPL");
1699
1700
1701 /* Ideally the user would give us io=, irq= for every card.  If any parameters
1702  * are specified, we verify and then use them.  If no parameters are given, we
1703  * autoprobe for one card only.
1704  */
1705 int init_module(void)
1706 {
1707         struct net_device *dev;
1708         int this_dev, found = 0;
1709
1710         for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) {
1711                 dev = alloc_etherdev(sizeof(struct net_local));
1712                 dev->irq = irq[this_dev];
1713                 dev->base_addr = io[this_dev];
1714                 if (io[this_dev] == 0) {
1715                         if (this_dev)
1716                                 break;
1717                         printk(KERN_NOTICE "eexpress.c: Module autoprobe not recommended, give io=xx.\n");
1718                 }
1719                 if (do_express_probe(dev) == 0 && register_netdev(dev) == 0) {
1720                         dev_eexp[this_dev] = dev;
1721                         found++;
1722                         continue;
1723                 }
1724                 printk(KERN_WARNING "eexpress.c: Failed to register card at 0x%x.\n", io[this_dev]);
1725                 free_netdev(dev);
1726                 break;
1727         }
1728         if (found)
1729                 return 0;
1730         return -ENXIO;
1731 }
1732
1733 void cleanup_module(void)
1734 {
1735         int this_dev;
1736
1737         for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) {
1738                 struct net_device *dev = dev_eexp[this_dev];
1739                 if (dev) {
1740                         unregister_netdev(dev);
1741                         free_netdev(dev);
1742                 }
1743         }
1744 }
1745 #endif
1746
1747 /*
1748  * Local Variables:
1749  *  c-file-style: "linux"
1750  *  tab-width: 8
1751  * End:
1752  */