1 /* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03)
2 * Xircom CreditCard Ethernet Adapter IIps driver
3 * Xircom Realport 10/100 (RE-100) driver
5 * This driver supports various Xircom CreditCard Ethernet adapters
6 * including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56,
7 * CE3-100, CE3B, RE-100, REM10BT, and REM56G-100.
9 * 2000-09-24 <psheer@icon.co.za> The Xircom CE3B-100 may not
10 * autodetect the media properly. In this case use the
11 * if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options
12 * to force the media type.
14 * Written originally by Werner Koch based on David Hinds' skeleton of the
17 * Copyright (c) 1997,1998 Werner Koch (dd9jn)
19 * This driver is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
24 * It is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
34 * ALTERNATIVELY, this driver may be distributed under the terms of
35 * the following license, in which case the provisions of this license
36 * are required INSTEAD OF the GNU General Public License. (This clause
37 * is necessary due to a potential bad interaction between the GPL and
38 * the restrictions contained in a BSD-style copyright.)
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
43 * 1. Redistributions of source code must retain the above copyright
44 * notice, and the entire permission notice in its entirety,
45 * including the disclaimer of warranties.
46 * 2. Redistributions in binary form must reproduce the above copyright
47 * notice, this list of conditions and the following disclaimer in the
48 * documentation and/or other materials provided with the distribution.
49 * 3. The name of the author may not be used to endorse or promote
50 * products derived from this software without specific prior
53 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
54 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
55 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
56 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
57 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
58 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
59 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
60 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
61 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
62 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
63 * OF THE POSSIBILITY OF SUCH DAMAGE.
66 #include <linux/module.h>
67 #include <linux/kernel.h>
68 #include <linux/init.h>
69 #include <linux/ptrace.h>
70 #include <linux/slab.h>
71 #include <linux/string.h>
72 #include <linux/timer.h>
73 #include <linux/interrupt.h>
75 #include <linux/delay.h>
76 #include <linux/ethtool.h>
77 #include <linux/netdevice.h>
78 #include <linux/etherdevice.h>
79 #include <linux/skbuff.h>
80 #include <linux/if_arp.h>
81 #include <linux/ioport.h>
83 #include <pcmcia/version.h>
84 #include <pcmcia/cs_types.h>
85 #include <pcmcia/cs.h>
86 #include <pcmcia/cistpl.h>
87 #include <pcmcia/cisreg.h>
88 #include <pcmcia/ciscode.h>
91 #include <asm/system.h>
92 #include <asm/bitops.h>
93 #include <asm/uaccess.h>
96 #define MANFID_COMPAQ 0x0138
97 #define MANFID_COMPAQ2 0x0183 /* is this correct? */
100 #include <pcmcia/ds.h>
102 /* Time in jiffies before concluding Tx hung */
103 #define TX_TIMEOUT ((400*HZ)/1000)
106 * Some constants used to access the hardware
109 /* Register offsets and value constans */
110 #define XIRCREG_CR 0 /* Command register (wr) */
112 TransmitPacket = 0x01,
120 #define XIRCREG_ESR 0 /* Ethernet status register (rd) */
122 FullPktRcvd = 0x01, /* full packet in receive buffer */
123 PktRejected = 0x04, /* a packet has been rejected */
124 TxPktPend = 0x08, /* TX Packet Pending */
125 IncorPolarity = 0x10,
126 MediaSelect = 0x20 /* set if TP, clear if AUI */
128 #define XIRCREG_PR 1 /* Page Register select */
129 #define XIRCREG_EDP 4 /* Ethernet Data Port Register */
130 #define XIRCREG_ISR 6 /* Ethernet Interrupt Status Register */
132 TxBufOvr = 0x01, /* TX Buffer Overflow */
133 PktTxed = 0x02, /* Packet Transmitted */
134 MACIntr = 0x04, /* MAC Interrupt occurred */
135 TxResGrant = 0x08, /* Tx Reservation Granted */
136 RxFullPkt = 0x20, /* Rx Full Packet */
137 RxPktRej = 0x40, /* Rx Packet Rejected */
138 ForcedIntr= 0x80 /* Forced Interrupt */
140 #define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/
141 #define XIRCREG1_IMR1 13
142 #define XIRCREG0_TSO 8 /* Transmit Space Open Register (on page 0)*/
143 #define XIRCREG0_TRS 10 /* Transmit reservation Size Register (page 0)*/
144 #define XIRCREG0_DO 12 /* Data Offset Register (page 0) (wr) */
145 #define XIRCREG0_RSR 12 /* Receive Status Register (page 0) (rd) */
147 PhyPkt = 0x01, /* set:physical packet, clear: multicast packet */
148 BrdcstPkt = 0x02, /* set if it is a broadcast packet */
149 PktTooLong = 0x04, /* set if packet length > 1518 */
150 AlignErr = 0x10, /* incorrect CRC and last octet not complete */
151 CRCErr = 0x20, /* incorrect CRC and last octet is complete */
152 PktRxOk = 0x80 /* received ok */
154 #define XIRCREG0_PTR 13 /* packets transmitted register (rd) */
155 #define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */
156 #define XIRCREG1_ECR 14 /* ethernet configurationn register */
158 FullDuplex = 0x04, /* enable full duplex mode */
159 LongTPMode = 0x08, /* adjust for longer lengths of TP cable */
160 DisablePolCor = 0x10,/* disable auto polarity correction */
161 DisableLinkPulse = 0x20, /* disable link pulse generation */
162 DisableAutoTx = 0x40, /* disable auto-transmit */
164 #define XIRCREG2_RBS 8 /* receive buffer start register */
165 #define XIRCREG2_LED 10 /* LED Configuration register */
166 /* values for the leds: Bits 2-0 for led 1
167 * 0 disabled Bits 5-3 for led 2
176 #define XIRCREG2_MSR 12 /* Mohawk specific register */
178 #define XIRCREG4_GPR0 8 /* General Purpose Register 0 */
179 #define XIRCREG4_GPR1 9 /* General Purpose Register 1 */
180 #define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/
181 #define XIRCREG4_BOV 10 /* Bonding Version Register */
182 #define XIRCREG4_LMA 12 /* Local Memory Address Register */
183 #define XIRCREG4_LMD 14 /* Local Memory Data Port */
184 /* MAC register can only by accessed with 8 bit operations */
185 #define XIRCREG40_CMD0 8 /* Command Register (wr) */
186 enum xirc_cmd { /* Commands */
195 #define XIRCREG5_RHSA0 10 /* Rx Host Start Address */
196 #define XIRCREG40_RXST0 9 /* Receive Status Register */
197 #define XIRCREG40_TXST0 11 /* Transmit Status Register 0 */
198 #define XIRCREG40_TXST1 12 /* Transmit Status Register 10 */
199 #define XIRCREG40_RMASK0 13 /* Receive Mask Register */
200 #define XIRCREG40_TMASK0 14 /* Transmit Mask Register 0 */
201 #define XIRCREG40_TMASK1 15 /* Transmit Mask Register 0 */
202 #define XIRCREG42_SWC0 8 /* Software Configuration 0 */
203 #define XIRCREG42_SWC1 9 /* Software Configuration 1 */
204 #define XIRCREG42_BOC 10 /* Back-Off Configuration */
205 #define XIRCREG44_TDR0 8 /* Time Domain Reflectometry 0 */
206 #define XIRCREG44_TDR1 9 /* Time Domain Reflectometry 1 */
207 #define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */
208 #define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */
209 #define XIRCREG45_REV 15 /* Revision Register (rd) */
210 #define XIRCREG50_IA 8 /* Individual Address (8-13) */
212 static char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
215 * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
216 * you do not define PCMCIA_DEBUG at all, all the debug code will be
217 * left out. If you compile with PCMCIA_DEBUG=0, the debug code will
218 * be present but disabled -- but it can then be enabled for specific
219 * modules at load time with a 'pc_debug=#' option to insmod.
222 static int pc_debug = PCMCIA_DEBUG;
223 MODULE_PARM(pc_debug, "i");
224 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KDBG_XIRC args)
226 #define DEBUG(n, args...)
229 #define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: "
230 #define KERR_XIRC KERN_ERR "xirc2ps_cs: "
231 #define KWRN_XIRC KERN_WARNING "xirc2ps_cs: "
232 #define KNOT_XIRC KERN_NOTICE "xirc2ps_cs: "
233 #define KINF_XIRC KERN_INFO "xirc2ps_cs: "
236 #define XIR_UNKNOWN 0 /* unknown: not supported */
237 #define XIR_CE 1 /* (prodid 1) different hardware: not supported */
238 #define XIR_CE2 2 /* (prodid 2) */
239 #define XIR_CE3 3 /* (prodid 3) */
240 #define XIR_CEM 4 /* (prodid 1) different hardware: not supported */
241 #define XIR_CEM2 5 /* (prodid 2) */
242 #define XIR_CEM3 6 /* (prodid 3) */
243 #define XIR_CEM33 7 /* (prodid 4) */
244 #define XIR_CEM56M 8 /* (prodid 5) */
245 #define XIR_CEM56 9 /* (prodid 6) */
246 #define XIR_CM28 10 /* (prodid 3) modem only: not supported here */
247 #define XIR_CM33 11 /* (prodid 4) modem only: not supported here */
248 #define XIR_CM56 12 /* (prodid 5) modem only: not supported here */
249 #define XIR_CG 13 /* (prodid 1) GSM modem only: not supported */
250 #define XIR_CBE 14 /* (prodid 1) cardbus ethernet: not supported */
251 /*====================================================================*/
253 /* Module parameters */
255 MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver");
256 MODULE_LICENSE("Dual MPL/GPL");
258 #define INT_MODULE_PARM(n, v) static int n = v; MODULE_PARM(n, "i")
260 static int irq_list[4] = { -1 };
261 MODULE_PARM(irq_list, "1-4i");
262 INT_MODULE_PARM(irq_mask, 0xdeb8);
263 INT_MODULE_PARM(if_port, 0);
264 INT_MODULE_PARM(full_duplex, 0);
265 INT_MODULE_PARM(do_sound, 1);
266 INT_MODULE_PARM(lockup_hack, 0); /* anti lockup hack */
268 /*====================================================================*/
270 /* We do not process more than these number of bytes during one
271 * interrupt. (Of course we receive complete packets, so this is not
273 * Something between 2000..22000; first value gives best interrupt latency,
274 * the second enables the usage of the complete on-chip buffer. We use the
275 * high value as the initial value.
277 static unsigned maxrx_bytes = 22000;
279 /* MII management prototypes */
280 static void mii_idle(ioaddr_t ioaddr);
281 static void mii_putbit(ioaddr_t ioaddr, unsigned data);
282 static int mii_getbit(ioaddr_t ioaddr);
283 static void mii_wbits(ioaddr_t ioaddr, unsigned data, int len);
284 static unsigned mii_rd(ioaddr_t ioaddr, u_char phyaddr, u_char phyreg);
285 static void mii_wr(ioaddr_t ioaddr, u_char phyaddr, u_char phyreg,
286 unsigned data, int len);
289 * The event() function is this driver's Card Services event handler.
290 * It will be called by Card Services when an appropriate card status
291 * event is received. The config() and release() entry points are
292 * used to configure or release a socket, in response to card insertion
293 * and ejection events. They are invoked from the event handler.
296 static int has_ce2_string(dev_link_t * link);
297 static void xirc2ps_config(dev_link_t * link);
298 static void xirc2ps_release(dev_link_t * link);
299 static int xirc2ps_event(event_t event, int priority,
300 event_callback_args_t * args);
303 * The attach() and detach() entry points are used to create and destroy
304 * "instances" of the driver, where each instance represents everything
305 * needed to manage one actual PCMCIA card.
308 static dev_link_t *xirc2ps_attach(void);
309 static void xirc2ps_detach(dev_link_t *);
312 * You'll also need to prototype all the functions that will actually
313 * be used to talk to your device. See 'pcmem_cs' for a good example
314 * of a fully self-sufficient driver; the other drivers rely more or
315 * less on other parts of the kernel.
318 static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id, struct pt_regs *regs);
321 * The dev_info variable is the "key" that is used to match up this
322 * device driver with appropriate cards, through the card configuration
326 static dev_info_t dev_info = "xirc2ps_cs";
329 * A linked list of "instances" of the device. Each actual
330 * PCMCIA card corresponds to one device instance, and is described
331 * by one dev_link_t structure (defined in ds.h).
333 * You may not want to use a linked list for this -- for example, the
334 * memory card driver uses an array of dev_link_t pointers, where minor
335 * device numbers are used to derive the corresponding array index.
338 static dev_link_t *dev_list;
341 * A dev_link_t structure has fields for most things that are needed
342 * to keep track of a socket, but there will usually be some device
343 * specific information that also needs to be kept track of. The
344 * 'priv' pointer in a dev_link_t structure can be used to point to
345 * a device-specific private data structure, like this.
347 * A driver needs to provide a dev_node_t structure for each device
348 * on a card. In some cases, there is only one device per card (for
349 * example, ethernet cards, modems). In other cases, there may be
350 * many actual or logical devices (SCSI adapters, memory cards with
351 * multiple partitions). The dev_node_t structures need to be kept
352 * in a linked list starting at the 'dev' field of a dev_link_t
353 * structure. We allocate them in the card's private data structure,
354 * because they generally can't be allocated dynamically.
357 typedef struct local_info_t {
360 struct net_device_stats stats;
363 int silicon; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */
364 int mohawk; /* a CE3 type card */
365 int dingo; /* a CEM56 type card */
366 int new_mii; /* has full 10baseT/100baseT MII */
367 int modem; /* is a multi function card (i.e with a modem) */
368 caddr_t dingo_ccr; /* only used for CEM56 cards */
369 unsigned last_ptr_value; /* last packets transmitted value */
370 const char *manf_str;
374 * Some more prototypes
376 static int do_start_xmit(struct sk_buff *skb, struct net_device *dev);
377 static void do_tx_timeout(struct net_device *dev);
378 static struct net_device_stats *do_get_stats(struct net_device *dev);
379 static void set_addresses(struct net_device *dev);
380 static void set_multicast_list(struct net_device *dev);
381 static int set_card_type(dev_link_t *link, const void *s);
382 static int do_config(struct net_device *dev, struct ifmap *map);
383 static int do_open(struct net_device *dev);
384 static int do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
385 static struct ethtool_ops netdev_ethtool_ops;
386 static void hardreset(struct net_device *dev);
387 static void do_reset(struct net_device *dev, int full);
388 static int init_mii(struct net_device *dev);
389 static void do_powerdown(struct net_device *dev);
390 static int do_stop(struct net_device *dev);
392 /*=============== Helper functions =========================*/
394 first_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse)
398 if ((err = pcmcia_get_first_tuple(handle, tuple)) == 0 &&
399 (err = pcmcia_get_tuple_data(handle, tuple)) == 0)
400 err = pcmcia_parse_tuple(handle, tuple, parse);
405 next_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse)
409 if ((err = pcmcia_get_next_tuple(handle, tuple)) == 0 &&
410 (err = pcmcia_get_tuple_data(handle, tuple)) == 0)
411 err = pcmcia_parse_tuple(handle, tuple, parse);
415 #define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR)
416 #define GetByte(reg) ((unsigned)inb(ioaddr + (reg)))
417 #define GetWord(reg) ((unsigned)inw(ioaddr + (reg)))
418 #define PutByte(reg,value) outb((value), ioaddr+(reg))
419 #define PutWord(reg,value) outw((value), ioaddr+(reg))
421 #define Wait(n) do { \
422 set_current_state(TASK_UNINTERRUPTIBLE); \
423 schedule_timeout(n); \
426 /*====== Functions used for debugging =================================*/
427 #if defined(PCMCIA_DEBUG) && 0 /* reading regs may change system status */
429 PrintRegisters(struct net_device *dev)
431 ioaddr_t ioaddr = dev->base_addr;
436 printk(KDBG_XIRC "Register common: ");
437 for (i = 0; i < 8; i++)
438 printk(" %2.2x", GetByte(i));
440 for (page = 0; page <= 8; page++) {
441 printk(KDBG_XIRC "Register page %2x: ", page);
443 for (i = 8; i < 16; i++)
444 printk(" %2.2x", GetByte(i));
447 for (page=0x40 ; page <= 0x5f; page++) {
448 if (page == 0x43 || (page >= 0x46 && page <= 0x4f)
449 || (page >= 0x51 && page <=0x5e))
451 printk(KDBG_XIRC "Register page %2x: ", page);
453 for (i = 8; i < 16; i++)
454 printk(" %2.2x", GetByte(i));
459 #endif /* PCMCIA_DEBUG */
461 /*============== MII Management functions ===============*/
464 * Turn around for read
467 mii_idle(ioaddr_t ioaddr)
469 PutByte(XIRCREG2_GPR2, 0x04|0); /* drive MDCK low */
471 PutByte(XIRCREG2_GPR2, 0x04|1); /* and drive MDCK high */
476 * Write a bit to MDI/O
479 mii_putbit(ioaddr_t ioaddr, unsigned data)
483 PutByte(XIRCREG2_GPR2, 0x0c|2|0); /* set MDIO */
485 PutByte(XIRCREG2_GPR2, 0x0c|2|1); /* and drive MDCK high */
488 PutByte(XIRCREG2_GPR2, 0x0c|0|0); /* clear MDIO */
490 PutByte(XIRCREG2_GPR2, 0x0c|0|1); /* and drive MDCK high */
495 PutWord(XIRCREG2_GPR2-1, 0x0e0e);
497 PutWord(XIRCREG2_GPR2-1, 0x0f0f);
500 PutWord(XIRCREG2_GPR2-1, 0x0c0c);
502 PutWord(XIRCREG2_GPR2-1, 0x0d0d);
509 * Get a bit from MDI/O
512 mii_getbit(ioaddr_t ioaddr)
516 PutByte(XIRCREG2_GPR2, 4|0); /* drive MDCK low */
518 d = GetByte(XIRCREG2_GPR2); /* read MDIO */
519 PutByte(XIRCREG2_GPR2, 4|1); /* drive MDCK high again */
521 return d & 0x20; /* read MDIO */
525 mii_wbits(ioaddr_t ioaddr, unsigned data, int len)
527 unsigned m = 1 << (len-1);
529 mii_putbit(ioaddr, data & m);
533 mii_rd(ioaddr_t ioaddr, u_char phyaddr, u_char phyreg)
539 for (i=0; i < 32; i++) /* 32 bit preamble */
540 mii_putbit(ioaddr, 1);
541 mii_wbits(ioaddr, 0x06, 4); /* Start and opcode for read */
542 mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
543 mii_wbits(ioaddr, phyreg, 5); /* PHY register to read */
544 mii_idle(ioaddr); /* turn around */
547 for (m = 1<<15; m; m >>= 1)
548 if (mii_getbit(ioaddr))
555 mii_wr(ioaddr_t ioaddr, u_char phyaddr, u_char phyreg, unsigned data, int len)
560 for (i=0; i < 32; i++) /* 32 bit preamble */
561 mii_putbit(ioaddr, 1);
562 mii_wbits(ioaddr, 0x05, 4); /* Start and opcode for write */
563 mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
564 mii_wbits(ioaddr, phyreg, 5); /* PHY Register to write */
565 mii_putbit(ioaddr, 1); /* turn around */
566 mii_putbit(ioaddr, 0);
567 mii_wbits(ioaddr, data, len); /* And write the data */
571 /*============= Main bulk of functions =========================*/
574 * xirc2ps_attach() creates an "instance" of the driver, allocating
575 * local data structures for one device. The device is registered
576 * with Card Services.
578 * The dev_link structure is initialized, but we don't actually
579 * configure the card at this point -- we wait until we receive a
580 * card insertion event.
586 client_reg_t client_reg;
588 struct net_device *dev;
592 DEBUG(0, "attach()\n");
594 /* Allocate the device structure */
595 dev = alloc_etherdev(sizeof(local_info_t));
598 local = netdev_priv(dev);
602 /* General socket configuration */
603 link->conf.Attributes = CONF_ENABLE_IRQ;
605 link->conf.IntType = INT_MEMORY_AND_IO;
606 link->conf.ConfigIndex = 1;
607 link->conf.Present = PRESENT_OPTION;
608 link->irq.Handler = xirc2ps_interrupt;
609 link->irq.Instance = dev;
611 /* Fill in card specific entries */
612 SET_MODULE_OWNER(dev);
613 dev->hard_start_xmit = &do_start_xmit;
614 dev->set_config = &do_config;
615 dev->get_stats = &do_get_stats;
616 dev->do_ioctl = &do_ioctl;
617 SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
618 dev->set_multicast_list = &set_multicast_list;
619 dev->open = &do_open;
620 dev->stop = &do_stop;
621 #ifdef HAVE_TX_TIMEOUT
622 dev->tx_timeout = do_tx_timeout;
623 dev->watchdog_timeo = TX_TIMEOUT;
626 /* Register with Card Services */
627 link->next = dev_list;
629 client_reg.dev_info = &dev_info;
630 client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
631 client_reg.EventMask =
632 CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
633 CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
634 CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
635 client_reg.event_handler = &xirc2ps_event;
636 client_reg.Version = 0x0210;
637 client_reg.event_callback_args.client_data = link;
638 if ((err = pcmcia_register_client(&link->handle, &client_reg))) {
639 cs_error(link->handle, RegisterClient, err);
640 xirc2ps_detach(link);
645 } /* xirc2ps_attach */
648 * This deletes a driver "instance". The device is de-registered
649 * with Card Services. If it has been released, all local data
650 * structures are freed. Otherwise, the structures will be freed
651 * when the device is released.
655 xirc2ps_detach(dev_link_t * link)
657 struct net_device *dev = link->priv;
660 DEBUG(0, "detach(0x%p)\n", link);
662 /* Locate device structure */
663 for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
667 DEBUG(0, "detach(0x%p): dev_link lost\n", link);
672 * If the device is currently configured and active, we won't
673 * actually delete it yet. Instead, it is marked so that when
674 * the release() function is called, that will trigger a proper
677 if (link->state & DEV_CONFIG)
678 xirc2ps_release(link);
680 /* Break the link with Card Services */
682 pcmcia_deregister_client(link->handle);
684 /* Unlink device structure, free it */
687 unregister_netdev(dev);
689 } /* xirc2ps_detach */
692 * Detect the type of the card. s is the buffer with the data of tuple 0x20
693 * Returns: 0 := not supported
694 * mediaid=11 and prodid=47
710 set_card_type(dev_link_t *link, const void *s)
712 struct net_device *dev = link->priv;
713 local_info_t *local = netdev_priv(dev);
715 unsigned cisrev = ((const unsigned char *)s)[2];
717 unsigned mediaid= ((const unsigned char *)s)[3];
718 unsigned prodid = ((const unsigned char *)s)[4];
720 DEBUG(0, "cisrev=%02x mediaid=%02x prodid=%02x\n",
721 cisrev, mediaid, prodid);
726 local->card_type = XIR_UNKNOWN;
727 if (!(prodid & 0x40)) {
728 printk(KNOT_XIRC "Ooops: Not a creditcard\n");
731 if (!(mediaid & 0x01)) {
732 printk(KNOT_XIRC "Not an Ethernet card\n");
735 if (mediaid & 0x10) {
737 switch(prodid & 15) {
738 case 1: local->card_type = XIR_CEM ; break;
739 case 2: local->card_type = XIR_CEM2 ; break;
740 case 3: local->card_type = XIR_CEM3 ; break;
741 case 4: local->card_type = XIR_CEM33 ; break;
742 case 5: local->card_type = XIR_CEM56M;
746 case 7: /* 7 is the RealPort 10/56 */
747 local->card_type = XIR_CEM56 ;
753 switch(prodid & 15) {
754 case 1: local->card_type = has_ce2_string(link)? XIR_CE2 : XIR_CE ;
756 case 2: local->card_type = XIR_CE2; break;
757 case 3: local->card_type = XIR_CE3;
762 if (local->card_type == XIR_CE || local->card_type == XIR_CEM) {
763 printk(KNOT_XIRC "Sorry, this is an old CE card\n");
766 if (local->card_type == XIR_UNKNOWN)
767 printk(KNOT_XIRC "unknown card (mediaid=%02x prodid=%02x)\n",
774 * There are some CE2 cards out which claim to be a CE card.
775 * This function looks for a "CE2" in the 3rd version field.
776 * Returns: true if this is a CE2
779 has_ce2_string(dev_link_t * link)
781 client_handle_t handle = link->handle;
786 tuple.Attributes = 0;
787 tuple.TupleData = buf;
788 tuple.TupleDataMax = 254;
789 tuple.TupleOffset = 0;
790 tuple.DesiredTuple = CISTPL_VERS_1;
791 if (!first_tuple(handle, &tuple, &parse) && parse.version_1.ns > 2) {
792 if (strstr(parse.version_1.str + parse.version_1.ofs[2], "CE2"))
799 * xirc2ps_config() is scheduled to run after a CARD_INSERTION event
800 * is received, to configure the PCMCIA socket, and to make the
801 * ethernet device available to the system.
804 xirc2ps_config(dev_link_t * link)
806 client_handle_t handle = link->handle;
807 struct net_device *dev = link->priv;
808 local_info_t *local = netdev_priv(dev);
814 cistpl_lan_node_id_t *node_id = (cistpl_lan_node_id_t*)parse.funce.data;
815 cistpl_cftable_entry_t *cf = &parse.cftable_entry;
817 local->dingo_ccr = 0;
819 DEBUG(0, "config(0x%p)\n", link);
822 * This reads the card's CONFIG tuple to find its configuration
825 tuple.Attributes = 0;
826 tuple.TupleData = buf;
827 tuple.TupleDataMax = 64;
828 tuple.TupleOffset = 0;
830 /* Is this a valid card */
831 tuple.DesiredTuple = CISTPL_MANFID;
832 if ((err=first_tuple(handle, &tuple, &parse))) {
833 printk(KNOT_XIRC "manfid not found in CIS\n");
837 switch(parse.manfid.manf) {
839 local->manf_str = "Xircom";
842 local->manf_str = "Accton";
846 local->manf_str = "Compaq";
849 local->manf_str = "Intel";
852 local->manf_str = "Toshiba";
855 printk(KNOT_XIRC "Unknown Card Manufacturer ID: 0x%04x\n",
856 (unsigned)parse.manfid.manf);
859 DEBUG(0, "found %s card\n", local->manf_str);
861 if (!set_card_type(link, buf)) {
862 printk(KNOT_XIRC "this card is not supported\n");
866 /* get configuration stuff */
867 tuple.DesiredTuple = CISTPL_CONFIG;
868 if ((err=first_tuple(handle, &tuple, &parse)))
870 link->conf.ConfigBase = parse.config.base;
871 link->conf.Present = parse.config.rmask[0];
873 /* get the ethernet address from the CIS */
874 tuple.DesiredTuple = CISTPL_FUNCE;
875 for (err = first_tuple(handle, &tuple, &parse); !err;
876 err = next_tuple(handle, &tuple, &parse)) {
877 /* Once I saw two CISTPL_FUNCE_LAN_NODE_ID entries:
878 * the first one with a length of zero the second correct -
879 * so I skip all entries with length 0 */
880 if (parse.funce.type == CISTPL_FUNCE_LAN_NODE_ID
881 && ((cistpl_lan_node_id_t *)parse.funce.data)->nb)
884 if (err) { /* not found: try to get the node-id from tuple 0x89 */
885 tuple.DesiredTuple = 0x89; /* data layout looks like tuple 0x22 */
886 if ((err = pcmcia_get_first_tuple(handle, &tuple)) == 0 &&
887 (err = pcmcia_get_tuple_data(handle, &tuple)) == 0) {
888 if (tuple.TupleDataLen == 8 && *buf == CISTPL_FUNCE_LAN_NODE_ID)
889 memcpy(&parse, buf, 8);
894 if (err) { /* another try (James Lehmer's CE2 version 4.1)*/
895 tuple.DesiredTuple = CISTPL_FUNCE;
896 for (err = first_tuple(handle, &tuple, &parse); !err;
897 err = next_tuple(handle, &tuple, &parse)) {
898 if (parse.funce.type == 0x02 && parse.funce.data[0] == 1
899 && parse.funce.data[1] == 6 && tuple.TupleDataLen == 13) {
901 memcpy(&parse, buf+1, 8);
907 printk(KNOT_XIRC "node-id not found in CIS\n");
910 node_id = (cistpl_lan_node_id_t *)parse.funce.data;
911 if (node_id->nb != 6) {
912 printk(KNOT_XIRC "malformed node-id in CIS\n");
915 for (i=0; i < 6; i++)
916 dev->dev_addr[i] = node_id->id[i];
919 link->state |= DEV_CONFIG;
921 link->io.IOAddrLines =10;
922 link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
923 link->irq.Attributes = IRQ_HANDLE_PRESENT;
924 link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
925 if (irq_list[0] == -1)
926 link->irq.IRQInfo2 = irq_mask;
928 for (i = 0; i < 4; i++)
929 link->irq.IRQInfo2 |= 1 << irq_list[i];
935 link->conf.Attributes |= CONF_ENABLE_SPKR;
936 link->conf.Status |= CCSR_AUDIO_ENA;
938 link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED ;
939 link->io.NumPorts2 = 8;
940 link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
942 /* Take the Modem IO port from the CIS and scan for a free
944 link->io.NumPorts1 = 16; /* no Mako stuff anymore */
945 tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
946 for (err = first_tuple(handle, &tuple, &parse); !err;
947 err = next_tuple(handle, &tuple, &parse)) {
948 if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
949 for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
950 link->conf.ConfigIndex = cf->index ;
951 link->io.BasePort2 = cf->io.win[0].base;
952 link->io.BasePort1 = ioaddr;
953 if (!(err=pcmcia_request_io(link->handle, &link->io)))
959 link->io.NumPorts1 = 18;
960 /* We do 2 passes here: The first one uses the regular mapping and
961 * the second tries again, thereby considering that the 32 ports are
962 * mirrored every 32 bytes. Actually we use a mirrored port for
963 * the Mako if (on the first pass) the COR bit 5 is set.
965 for (pass=0; pass < 2; pass++) {
966 tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
967 for (err = first_tuple(handle, &tuple, &parse); !err;
968 err = next_tuple(handle, &tuple, &parse)){
969 if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8){
970 link->conf.ConfigIndex = cf->index ;
971 link->io.BasePort2 = cf->io.win[0].base;
972 link->io.BasePort1 = link->io.BasePort2
973 + (pass ? (cf->index & 0x20 ? -24:8)
974 : (cf->index & 0x20 ? 8:-24));
975 if (!(err=pcmcia_request_io(link->handle, &link->io)))
980 /* if special option:
981 * try to configure as Ethernet only.
984 printk(KNOT_XIRC "no ports available\n");
986 link->irq.Attributes |= IRQ_TYPE_EXCLUSIVE;
987 link->io.NumPorts1 = 16;
988 for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
989 link->io.BasePort1 = ioaddr;
990 if (!(err=pcmcia_request_io(link->handle, &link->io)))
993 link->io.BasePort1 = 0; /* let CS decide */
994 if ((err=pcmcia_request_io(link->handle, &link->io))) {
995 cs_error(link->handle, RequestIO, err);
1004 * Now allocate an interrupt line. Note that this does not
1005 * actually assign a handler to the interrupt.
1007 if ((err=pcmcia_request_irq(link->handle, &link->irq))) {
1008 cs_error(link->handle, RequestIRQ, err);
1013 * This actually configures the PCMCIA socket -- setting up
1014 * the I/O windows and the interrupt mapping.
1016 if ((err=pcmcia_request_configuration(link->handle, &link->conf))) {
1017 cs_error(link->handle, RequestConfiguration, err);
1026 /* Reset the modem's BAR to the correct value
1027 * This is necessary because in the RequestConfiguration call,
1028 * the base address of the ethernet port (BasePort1) is written
1029 * to the BAR registers of the modem.
1031 reg.Action = CS_WRITE;
1032 reg.Offset = CISREG_IOBASE_0;
1033 reg.Value = link->io.BasePort2 & 0xff;
1034 if ((err = pcmcia_access_configuration_register(link->handle, ®))) {
1035 cs_error(link->handle, AccessConfigurationRegister, err);
1038 reg.Action = CS_WRITE;
1039 reg.Offset = CISREG_IOBASE_1;
1040 reg.Value = (link->io.BasePort2 >> 8) & 0xff;
1041 if ((err = pcmcia_access_configuration_register(link->handle, ®))) {
1042 cs_error(link->handle, AccessConfigurationRegister, err);
1046 /* There is no config entry for the Ethernet part which
1047 * is at 0x0800. So we allocate a window into the attribute
1048 * memory and write direct to the CIS registers
1050 req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
1051 req.Base = req.Size = 0;
1052 req.AccessSpeed = 0;
1053 if ((err = pcmcia_request_window(&link->handle, &req, &link->win))) {
1054 cs_error(link->handle, RequestWindow, err);
1057 local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800;
1058 mem.CardOffset = 0x0;
1060 if ((err = pcmcia_map_mem_page(link->win, &mem))) {
1061 cs_error(link->handle, MapMemPage, err);
1065 /* Setup the CCRs; there are no infos in the CIS about the Ethernet
1068 writeb(0x47, local->dingo_ccr + CISREG_COR);
1069 ioaddr = link->io.BasePort1;
1070 writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0);
1071 writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1);
1076 printk(KERN_INFO "ECOR:");
1077 for (i=0; i < 7; i++) {
1078 tmp = readb(local->dingo_ccr + i*2);
1079 printk(" %02x", tmp);
1082 printk(KERN_INFO "DCOR:");
1083 for (i=0; i < 4; i++) {
1084 tmp = readb(local->dingo_ccr + 0x20 + i*2);
1085 printk(" %02x", tmp);
1088 printk(KERN_INFO "SCOR:");
1089 for (i=0; i < 10; i++) {
1090 tmp = readb(local->dingo_ccr + 0x40 + i*2);
1091 printk(" %02x", tmp);
1097 writeb(0x01, local->dingo_ccr + 0x20);
1098 writeb(0x0c, local->dingo_ccr + 0x22);
1099 writeb(0x00, local->dingo_ccr + 0x24);
1100 writeb(0x00, local->dingo_ccr + 0x26);
1101 writeb(0x00, local->dingo_ccr + 0x28);
1104 /* The if_port symbol can be set when the module is loaded */
1105 local->probe_port=0;
1107 local->probe_port = dev->if_port = 1;
1108 } else if ((if_port >= 1 && if_port <= 2) ||
1109 (local->mohawk && if_port==4))
1110 dev->if_port = if_port;
1112 printk(KNOT_XIRC "invalid if_port requested\n");
1114 /* we can now register the device with the net subsystem */
1115 dev->irq = link->irq.AssignedIRQ;
1116 dev->base_addr = link->io.BasePort1;
1119 do_reset(dev, 1); /* a kludge to make the cem56 work */
1121 link->dev = &local->node;
1122 link->state &= ~DEV_CONFIG_PENDING;
1124 if ((err=register_netdev(dev))) {
1125 printk(KNOT_XIRC "register_netdev() failed\n");
1130 strcpy(local->node.dev_name, dev->name);
1132 /* give some infos about the hardware */
1133 printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr",
1134 dev->name, local->manf_str,(u_long)dev->base_addr, (int)dev->irq);
1135 for (i = 0; i < 6; i++)
1136 printk("%c%02X", i?':':' ', dev->dev_addr[i]);
1142 link->state &= ~DEV_CONFIG_PENDING;
1143 xirc2ps_release(link);
1147 printk(KNOT_XIRC "unable to parse CIS\n");
1149 link->state &= ~DEV_CONFIG_PENDING;
1150 } /* xirc2ps_config */
1153 * After a card is removed, xirc2ps_release() will unregister the net
1154 * device, and release the PCMCIA configuration. If the device is
1155 * still open, this will be postponed until it is closed.
1158 xirc2ps_release(dev_link_t *link)
1161 DEBUG(0, "release(0x%p)\n", link);
1164 struct net_device *dev = link->priv;
1165 local_info_t *local = netdev_priv(dev);
1167 iounmap(local->dingo_ccr - 0x0800);
1168 pcmcia_release_window(link->win);
1170 pcmcia_release_configuration(link->handle);
1171 pcmcia_release_io(link->handle, &link->io);
1172 pcmcia_release_irq(link->handle, &link->irq);
1173 link->state &= ~DEV_CONFIG;
1175 } /* xirc2ps_release */
1177 /*====================================================================*/
1180 * The card status event handler. Mostly, this schedules other
1181 * stuff to run after an event is received. A CARD_REMOVAL event
1182 * also sets some flags to discourage the net drivers from trying
1183 * to talk to the card any more.
1185 * When a CARD_REMOVAL event is received, we immediately set a flag
1186 * to block future accesses to this device. All the functions that
1187 * actually access the device should check this flag to make sure
1188 * the card is still present.
1192 xirc2ps_event(event_t event, int priority,
1193 event_callback_args_t * args)
1195 dev_link_t *link = args->client_data;
1196 struct net_device *dev = link->priv;
1198 DEBUG(0, "event(%d)\n", (int)event);
1201 case CS_EVENT_REGISTRATION_COMPLETE:
1202 DEBUG(0, "registration complete\n");
1204 case CS_EVENT_CARD_REMOVAL:
1205 link->state &= ~DEV_PRESENT;
1206 if (link->state & DEV_CONFIG) {
1207 netif_device_detach(dev);
1208 xirc2ps_release(link);
1211 case CS_EVENT_CARD_INSERTION:
1212 link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
1213 xirc2ps_config(link);
1215 case CS_EVENT_PM_SUSPEND:
1216 link->state |= DEV_SUSPEND;
1217 /* Fall through... */
1218 case CS_EVENT_RESET_PHYSICAL:
1219 if (link->state & DEV_CONFIG) {
1221 netif_device_detach(dev);
1224 pcmcia_release_configuration(link->handle);
1227 case CS_EVENT_PM_RESUME:
1228 link->state &= ~DEV_SUSPEND;
1229 /* Fall through... */
1230 case CS_EVENT_CARD_RESET:
1231 if (link->state & DEV_CONFIG) {
1232 pcmcia_request_configuration(link->handle, &link->conf);
1235 netif_device_attach(dev);
1241 } /* xirc2ps_event */
1243 /*====================================================================*/
1246 * This is the Interrupt service route.
1249 xirc2ps_interrupt(int irq, void *dev_id, struct pt_regs *regs)
1251 struct net_device *dev = (struct net_device *)dev_id;
1252 local_info_t *lp = netdev_priv(dev);
1255 unsigned bytes_rcvd;
1256 unsigned int_status, eth_status, rx_status, tx_status;
1257 unsigned rsr, pktlen;
1258 ulong start_ticks = jiffies; /* fixme: jiffies rollover every 497 days
1259 * is this something to worry about?
1263 if (!netif_device_present(dev))
1266 ioaddr = dev->base_addr;
1267 if (lp->mohawk) { /* must disable the interrupt */
1268 PutByte(XIRCREG_CR, 0);
1271 DEBUG(6, "%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr);
1273 saved_page = GetByte(XIRCREG_PR);
1274 /* Read the ISR to see whats the cause for the interrupt.
1275 * This also clears the interrupt flags on CE2 cards
1277 int_status = GetByte(XIRCREG_ISR);
1280 if (int_status == 0xff) { /* card may be ejected */
1281 DEBUG(3, "%s: interrupt %d for dead card\n", dev->name, irq);
1284 eth_status = GetByte(XIRCREG_ESR);
1287 rx_status = GetByte(XIRCREG40_RXST0);
1288 PutByte(XIRCREG40_RXST0, (~rx_status & 0xff));
1289 tx_status = GetByte(XIRCREG40_TXST0);
1290 tx_status |= GetByte(XIRCREG40_TXST1) << 8;
1291 PutByte(XIRCREG40_TXST0, 0);
1292 PutByte(XIRCREG40_TXST1, 0);
1294 DEBUG(3, "%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
1295 dev->name, int_status, eth_status, rx_status, tx_status);
1297 /***** receive section ******/
1299 while (eth_status & FullPktRcvd) {
1300 rsr = GetByte(XIRCREG0_RSR);
1301 if (bytes_rcvd > maxrx_bytes && (rsr & PktRxOk)) {
1302 /* too many bytes received during this int, drop the rest of the
1304 lp->stats.rx_dropped++;
1305 DEBUG(2, "%s: RX drop, too much done\n", dev->name);
1306 } else if (rsr & PktRxOk) {
1307 struct sk_buff *skb;
1309 pktlen = GetWord(XIRCREG0_RBC);
1310 bytes_rcvd += pktlen;
1312 DEBUG(5, "rsr=%#02x packet_length=%u\n", rsr, pktlen);
1314 skb = dev_alloc_skb(pktlen+3); /* 1 extra so we can use insw */
1316 printk(KNOT_XIRC "low memory, packet dropped (size=%u)\n",
1318 lp->stats.rx_dropped++;
1319 } else { /* okay get the packet */
1320 skb_reserve(skb, 2);
1321 if (lp->silicon == 0 ) { /* work around a hardware bug */
1322 unsigned rhsa; /* receive start address */
1325 rhsa = GetWord(XIRCREG5_RHSA0);
1327 rhsa += 3; /* skip control infos */
1330 if (rhsa + pktlen > 0x8000) {
1332 u_char *buf = skb_put(skb, pktlen);
1333 for (i=0; i < pktlen ; i++, rhsa++) {
1334 buf[i] = GetByte(XIRCREG_EDP);
1335 if (rhsa == 0x8000) {
1341 insw(ioaddr+XIRCREG_EDP,
1342 skb_put(skb, pktlen), (pktlen+1)>>1);
1346 else if (lp->mohawk) {
1347 /* To use this 32 bit access we should use
1348 * a manual optimized loop
1349 * Also the words are swapped, we can get more
1350 * performance by using 32 bit access and swapping
1351 * the words in a register. Will need this for cardbus
1353 * Note: don't forget to change the ALLOC_SKB to .. +3
1356 u_long *p = skb_put(skb, pktlen);
1358 ioaddr_t edpreg = ioaddr+XIRCREG_EDP-2;
1359 for (i=0; i < len ; i += 4, p++) {
1361 __asm__("rorl $16,%0\n\t"
1369 insw(ioaddr+XIRCREG_EDP, skb_put(skb, pktlen),
1372 skb->protocol = eth_type_trans(skb, dev);
1375 dev->last_rx = jiffies;
1376 lp->stats.rx_packets++;
1377 lp->stats.rx_bytes += pktlen;
1378 if (!(rsr & PhyPkt))
1379 lp->stats.multicast++;
1381 } else { /* bad packet */
1382 DEBUG(5, "rsr=%#02x\n", rsr);
1384 if (rsr & PktTooLong) {
1385 lp->stats.rx_frame_errors++;
1386 DEBUG(3, "%s: Packet too long\n", dev->name);
1389 lp->stats.rx_crc_errors++;
1390 DEBUG(3, "%s: CRC error\n", dev->name);
1392 if (rsr & AlignErr) {
1393 lp->stats.rx_fifo_errors++; /* okay ? */
1394 DEBUG(3, "%s: Alignment error\n", dev->name);
1397 /* clear the received/dropped/error packet */
1398 PutWord(XIRCREG0_DO, 0x8000); /* issue cmd: skip_rx_packet */
1400 /* get the new ethernet status */
1401 eth_status = GetByte(XIRCREG_ESR);
1403 if (rx_status & 0x10) { /* Receive overrun */
1404 lp->stats.rx_over_errors++;
1405 PutByte(XIRCREG_CR, ClearRxOvrun);
1406 DEBUG(3, "receive overrun cleared\n");
1409 /***** transmit section ******/
1410 if (int_status & PktTxed) {
1413 n = lp->last_ptr_value;
1414 nn = GetByte(XIRCREG0_PTR);
1415 lp->last_ptr_value = nn;
1416 if (nn < n) /* rollover */
1417 lp->stats.tx_packets += 256 - n;
1418 else if (n == nn) { /* happens sometimes - don't know why */
1419 DEBUG(0, "PTR not changed?\n");
1421 lp->stats.tx_packets += lp->last_ptr_value - n;
1422 netif_wake_queue(dev);
1424 if (tx_status & 0x0002) { /* Execessive collissions */
1425 DEBUG(0, "tx restarted due to execssive collissions\n");
1426 PutByte(XIRCREG_CR, RestartTx); /* restart transmitter process */
1428 if (tx_status & 0x0040)
1429 lp->stats.tx_aborted_errors++;
1431 /* recalculate our work chunk so that we limit the duration of this
1432 * ISR to about 1/10 of a second.
1433 * Calculate only if we received a reasonable amount of bytes.
1435 if (bytes_rcvd > 1000) {
1436 u_long duration = jiffies - start_ticks;
1438 if (duration >= HZ/10) { /* if more than about 1/10 second */
1439 maxrx_bytes = (bytes_rcvd * (HZ/10)) / duration;
1440 if (maxrx_bytes < 2000)
1442 else if (maxrx_bytes > 22000)
1443 maxrx_bytes = 22000;
1444 DEBUG(1, "set maxrx=%u (rcvd=%u ticks=%lu)\n",
1445 maxrx_bytes, bytes_rcvd, duration);
1446 } else if (!duration && maxrx_bytes < 22000) {
1447 /* now much faster */
1448 maxrx_bytes += 2000;
1449 if (maxrx_bytes > 22000)
1450 maxrx_bytes = 22000;
1451 DEBUG(1, "set maxrx=%u\n", maxrx_bytes);
1457 if (int_status != 0xff && (int_status = GetByte(XIRCREG_ISR)) != 0)
1460 SelectPage(saved_page);
1461 PutByte(XIRCREG_CR, EnableIntr); /* re-enable interrupts */
1462 /* Instead of dropping packets during a receive, we could
1463 * force an interrupt with this command:
1464 * PutByte(XIRCREG_CR, EnableIntr|ForceIntr);
1467 } /* xirc2ps_interrupt */
1469 /*====================================================================*/
1472 do_tx_timeout(struct net_device *dev)
1474 local_info_t *lp = netdev_priv(dev);
1475 printk(KERN_NOTICE "%s: transmit timed out\n", dev->name);
1476 lp->stats.tx_errors++;
1477 /* reset the card */
1479 dev->trans_start = jiffies;
1480 netif_wake_queue(dev);
1484 do_start_xmit(struct sk_buff *skb, struct net_device *dev)
1486 local_info_t *lp = netdev_priv(dev);
1487 ioaddr_t ioaddr = dev->base_addr;
1490 unsigned pktlen = skb? skb->len : 0;
1492 DEBUG(1, "do_start_xmit(skb=%p, dev=%p) len=%u\n",
1496 /* adjust the packet length to min. required
1497 * and hope that the buffer is large enough
1498 * to provide some random data.
1499 * fixme: For Mohawk we can change this by sending
1500 * a larger packetlen than we actually have; the chip will
1501 * pad this in his buffer with random bytes
1503 if (pktlen < ETH_ZLEN)
1505 skb = skb_padto(skb, ETH_ZLEN);
1511 netif_stop_queue(dev);
1513 PutWord(XIRCREG0_TRS, (u_short)pktlen+2);
1514 freespace = GetWord(XIRCREG0_TSO);
1515 okay = freespace & 0x8000;
1516 freespace &= 0x7fff;
1517 /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */
1518 okay = pktlen +2 < freespace;
1519 DEBUG(2 + (okay ? 2 : 0), "%s: avail. tx space=%u%s\n",
1520 dev->name, freespace, okay ? " (okay)":" (not enough)");
1521 if (!okay) { /* not enough space */
1522 return 1; /* upper layer may decide to requeue this packet */
1524 /* send the packet */
1525 PutWord(XIRCREG_EDP, (u_short)pktlen);
1526 outsw(ioaddr+XIRCREG_EDP, skb->data, pktlen>>1);
1528 PutByte(XIRCREG_EDP, skb->data[pktlen-1]);
1531 PutByte(XIRCREG_CR, TransmitPacket|EnableIntr);
1533 dev_kfree_skb (skb);
1534 dev->trans_start = jiffies;
1535 lp->stats.tx_bytes += pktlen;
1536 netif_start_queue(dev);
1540 static struct net_device_stats *
1541 do_get_stats(struct net_device *dev)
1543 local_info_t *lp = netdev_priv(dev);
1545 /* lp->stats.rx_missed_errors = GetByte(?) */
1550 * Set all addresses: This first one is the individual address,
1551 * the next 9 addresses are taken from the multicast list and
1552 * the rest is filled with the individual address.
1555 set_addresses(struct net_device *dev)
1557 ioaddr_t ioaddr = dev->base_addr;
1558 local_info_t *lp = netdev_priv(dev);
1559 struct dev_mc_list *dmi = dev->mc_list;
1564 for (i=0,j=8,n=0; ; i++, j++) {
1576 if (n && n <= dev->mc_count && dmi) {
1577 addr = dmi->dmi_addr;
1580 addr = dev->dev_addr;
1583 PutByte(j, addr[5-i]);
1585 PutByte(j, addr[i]);
1591 * Set or clear the multicast filter for this adaptor.
1592 * We can filter up to 9 addresses, if more are requested we set
1593 * multicast promiscuous mode.
1597 set_multicast_list(struct net_device *dev)
1599 ioaddr_t ioaddr = dev->base_addr;
1602 if (dev->flags & IFF_PROMISC) { /* snoop */
1603 PutByte(XIRCREG42_SWC1, 0x06); /* set MPE and PME */
1604 } else if (dev->mc_count > 9 || (dev->flags & IFF_ALLMULTI)) {
1605 PutByte(XIRCREG42_SWC1, 0x06); /* set MPE */
1606 } else if (dev->mc_count) {
1607 /* the chip can filter 9 addresses perfectly */
1608 PutByte(XIRCREG42_SWC1, 0x00);
1610 PutByte(XIRCREG40_CMD0, Offline);
1613 PutByte(XIRCREG40_CMD0, EnableRecv | Online);
1614 } else { /* standard usage */
1615 PutByte(XIRCREG42_SWC1, 0x00);
1621 do_config(struct net_device *dev, struct ifmap *map)
1623 local_info_t *local = netdev_priv(dev);
1625 DEBUG(0, "do_config(%p)\n", dev);
1626 if (map->port != 255 && map->port != dev->if_port) {
1630 local->probe_port = 1;
1633 local->probe_port = 0;
1634 dev->if_port = map->port;
1636 printk(KERN_INFO "%s: switching to %s port\n",
1637 dev->name, if_names[dev->if_port]);
1638 do_reset(dev,1); /* not the fine way :-) */
1647 do_open(struct net_device *dev)
1649 local_info_t *lp = netdev_priv(dev);
1650 dev_link_t *link = &lp->link;
1652 DEBUG(0, "do_open(%p)\n", dev);
1654 /* Check that the PCMCIA card is still here. */
1655 /* Physical device present signature. */
1662 netif_start_queue(dev);
1668 static void netdev_get_drvinfo(struct net_device *dev,
1669 struct ethtool_drvinfo *info)
1671 strcpy(info->driver, "xirc2ps_cs");
1672 sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
1675 static struct ethtool_ops netdev_ethtool_ops = {
1676 .get_drvinfo = netdev_get_drvinfo,
1680 do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1682 local_info_t *local = netdev_priv(dev);
1683 ioaddr_t ioaddr = dev->base_addr;
1684 u16 *data = (u16 *)&rq->ifr_data;
1686 DEBUG(1, "%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
1687 dev->name, rq->ifr_ifrn.ifrn_name, cmd,
1688 data[0], data[1], data[2], data[3]);
1694 case SIOCGMIIPHY: /* Get the address of the PHY in use. */
1695 data[0] = 0; /* we have only this address */
1697 case SIOCGMIIREG: /* Read the specified MII register. */
1698 data[3] = mii_rd(ioaddr, data[0] & 0x1f, data[1] & 0x1f);
1700 case SIOCSMIIREG: /* Write the specified MII register */
1701 if (!capable(CAP_NET_ADMIN))
1703 mii_wr(ioaddr, data[0] & 0x1f, data[1] & 0x1f, data[2], 16);
1712 hardreset(struct net_device *dev)
1714 local_info_t *local = netdev_priv(dev);
1715 ioaddr_t ioaddr = dev->base_addr;
1719 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
1720 Wait(HZ/25); /* wait 40 msec */
1722 PutByte(XIRCREG4_GPR1, 1); /* set bit 0: power up */
1724 PutByte(XIRCREG4_GPR1, 1 | 4); /* set bit 0: power up, bit 2: AIC */
1725 Wait(HZ/50); /* wait 20 msec */
1729 do_reset(struct net_device *dev, int full)
1731 local_info_t *local = netdev_priv(dev);
1732 ioaddr_t ioaddr = dev->base_addr;
1735 DEBUG(0, "%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full);
1738 PutByte(XIRCREG_CR, SoftReset); /* set */
1739 Wait(HZ/50); /* wait 20 msec */
1740 PutByte(XIRCREG_CR, 0); /* clear */
1741 Wait(HZ/25); /* wait 40 msec */
1742 if (local->mohawk) {
1744 /* set pin GP1 and GP2 to output (0x0c)
1745 * set GP1 to low to power up the ML6692 (0x00)
1746 * set GP2 to high to power up the 10Mhz chip (0x02)
1748 PutByte(XIRCREG4_GPR0, 0x0e);
1751 /* give the circuits some time to power up */
1752 Wait(HZ/2); /* about 500ms */
1754 local->last_ptr_value = 0;
1755 local->silicon = local->mohawk ? (GetByte(XIRCREG4_BOV) & 0x70) >> 4
1756 : (GetByte(XIRCREG4_BOV) & 0x30) >> 4;
1758 if (local->probe_port) {
1759 if (!local->mohawk) {
1761 PutByte(XIRCREG4_GPR0, 4);
1762 local->probe_port = 0;
1764 } else if (dev->if_port == 2) { /* enable 10Base2 */
1766 PutByte(XIRCREG42_SWC1, 0xC0);
1767 } else { /* enable 10BaseT */
1769 PutByte(XIRCREG42_SWC1, 0x80);
1771 Wait(HZ/25); /* wait 40 msec to let it complete */
1776 value = GetByte(XIRCREG_ESR); /* read the ESR */
1777 printk(KERN_DEBUG "%s: ESR is: %#02x\n", dev->name, value);
1783 PutByte(XIRCREG1_IMR0, 0xff); /* allow all ints */
1784 PutByte(XIRCREG1_IMR1, 1 ); /* and Set TxUnderrunDetect */
1785 value = GetByte(XIRCREG1_ECR);
1788 value |= DisableLinkPulse;
1789 PutByte(XIRCREG1_ECR, value);
1791 DEBUG(0, "%s: ECR is: %#02x\n", dev->name, value);
1794 PutByte(XIRCREG42_SWC0, 0x20); /* disable source insertion */
1796 if (local->silicon != 1) {
1797 /* set the local memory dividing line.
1798 * The comments in the sample code say that this is only
1799 * settable with the scipper version 2 which is revision 0.
1800 * Always for CE3 cards
1803 PutWord(XIRCREG2_RBS, 0x2000);
1809 /* Hardware workaround:
1810 * The receive byte pointer after reset is off by 1 so we need
1811 * to move the offset pointer back to 0.
1814 PutWord(XIRCREG0_DO, 0x2000); /* change offset command, off=0 */
1816 /* setup MAC IMRs and clear status registers */
1817 SelectPage(0x40); /* Bit 7 ... bit 0 */
1818 PutByte(XIRCREG40_RMASK0, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */
1819 PutByte(XIRCREG40_TMASK0, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1820 PutByte(XIRCREG40_TMASK1, 0xb0); /* rsv, rsv, PTD, EXT, rsv,rsv,rsv, rsv*/
1821 PutByte(XIRCREG40_RXST0, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */
1822 PutByte(XIRCREG40_TXST0, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1823 PutByte(XIRCREG40_TXST1, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */
1825 if (full && local->mohawk && init_mii(dev)) {
1826 if (dev->if_port == 4 || local->dingo || local->new_mii) {
1827 printk(KERN_INFO "%s: MII selected\n", dev->name);
1829 PutByte(XIRCREG2_MSR, GetByte(XIRCREG2_MSR) | 0x08);
1832 printk(KERN_INFO "%s: MII detected; using 10mbs\n",
1835 if (dev->if_port == 2) /* enable 10Base2 */
1836 PutByte(XIRCREG42_SWC1, 0xC0);
1837 else /* enable 10BaseT */
1838 PutByte(XIRCREG42_SWC1, 0x80);
1839 Wait(HZ/25); /* wait 40 msec to let it complete */
1842 PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR | FullDuplex));
1843 } else { /* No MII */
1845 value = GetByte(XIRCREG_ESR); /* read the ESR */
1846 dev->if_port = (value & MediaSelect) ? 1 : 2;
1849 /* configure the LEDs */
1851 if (dev->if_port == 1 || dev->if_port == 4) /* TP: Link and Activity */
1852 PutByte(XIRCREG2_LED, 0x3b);
1853 else /* Coax: Not-Collision and Activity */
1854 PutByte(XIRCREG2_LED, 0x3a);
1857 PutByte(0x0b, 0x04); /* 100 Mbit LED */
1859 /* enable receiver and put the mac online */
1862 PutByte(XIRCREG40_CMD0, EnableRecv | Online);
1865 /* setup Ethernet IMR and enable interrupts */
1867 PutByte(XIRCREG1_IMR0, 0xff);
1870 PutByte(XIRCREG_CR, EnableIntr);
1871 if (local->modem && !local->dingo) { /* do some magic */
1872 if (!(GetByte(0x10) & 0x01))
1873 PutByte(0x10, 0x11); /* unmask master-int bit */
1877 printk(KERN_INFO "%s: media %s, silicon revision %d\n",
1878 dev->name, if_names[dev->if_port], local->silicon);
1879 /* We should switch back to page 0 to avoid a bug in revision 0
1880 * where regs with offset below 8 can't be read after an access
1881 * to the MAC registers */
1886 * Initialize the Media-Independent-Interface
1887 * Returns: True if we have a good MII
1890 init_mii(struct net_device *dev)
1892 local_info_t *local = netdev_priv(dev);
1893 ioaddr_t ioaddr = dev->base_addr;
1894 unsigned control, status, linkpartner;
1897 if (if_port == 4 || if_port == 1) { /* force 100BaseT or 10BaseT */
1898 dev->if_port = if_port;
1899 local->probe_port = 0;
1903 status = mii_rd(ioaddr, 0, 1);
1904 if ((status & 0xff00) != 0x7800)
1905 return 0; /* No MII */
1907 local->new_mii = (mii_rd(ioaddr, 0, 2) != 0xffff);
1909 if (local->probe_port)
1910 control = 0x1000; /* auto neg */
1911 else if (dev->if_port == 4)
1912 control = 0x2000; /* no auto neg, 100mbs mode */
1914 control = 0x0000; /* no auto neg, 10mbs mode */
1915 mii_wr(ioaddr, 0, 0, control, 16);
1917 control = mii_rd(ioaddr, 0, 0);
1919 if (control & 0x0400) {
1920 printk(KERN_NOTICE "%s can't take PHY out of isolation mode\n",
1922 local->probe_port = 0;
1926 if (local->probe_port) {
1927 /* according to the DP83840A specs the auto negotiation process
1928 * may take up to 3.5 sec, so we use this also for our ML6692
1929 * Fixme: Better to use a timer here!
1931 for (i=0; i < 35; i++) {
1932 Wait(HZ/10); /* wait 100 msec */
1933 status = mii_rd(ioaddr, 0, 1);
1934 if ((status & 0x0020) && (status & 0x0004))
1938 if (!(status & 0x0020)) {
1939 printk(KERN_INFO "%s: autonegotiation failed;"
1940 " using 10mbs\n", dev->name);
1941 if (!local->new_mii) {
1943 mii_wr(ioaddr, 0, 0, control, 16);
1946 dev->if_port = (GetByte(XIRCREG_ESR) & MediaSelect) ? 1 : 2;
1949 linkpartner = mii_rd(ioaddr, 0, 5);
1950 printk(KERN_INFO "%s: MII link partner: %04x\n",
1951 dev->name, linkpartner);
1952 if (linkpartner & 0x0080) {
1963 do_powerdown(struct net_device *dev)
1966 ioaddr_t ioaddr = dev->base_addr;
1968 DEBUG(0, "do_powerdown(%p)\n", dev);
1971 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
1976 do_stop(struct net_device *dev)
1978 ioaddr_t ioaddr = dev->base_addr;
1979 local_info_t *lp = netdev_priv(dev);
1980 dev_link_t *link = &lp->link;
1982 DEBUG(0, "do_stop(%p)\n", dev);
1987 netif_stop_queue(dev);
1990 PutByte(XIRCREG_CR, 0); /* disable interrupts */
1992 PutByte(XIRCREG1_IMR0, 0x00); /* forbid all ints */
1994 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
2001 static struct pcmcia_driver xirc2ps_cs_driver = {
2002 .owner = THIS_MODULE,
2004 .name = "xirc2ps_cs",
2006 .attach = xirc2ps_attach,
2007 .detach = xirc2ps_detach,
2011 init_xirc2ps_cs(void)
2013 return pcmcia_register_driver(&xirc2ps_cs_driver);
2017 exit_xirc2ps_cs(void)
2019 pcmcia_unregister_driver(&xirc2ps_cs_driver);
2022 xirc2ps_detach(dev_list);
2025 module_init(init_xirc2ps_cs);
2026 module_exit(exit_xirc2ps_cs);
2029 static int __init setup_xirc2ps_cs(char *str)
2031 /* irq, irq_mask, if_port, full_duplex, do_sound, lockup_hack
2032 * [,irq2 [,irq3 [,irq4]]]
2034 int ints[10] = { -1 };
2036 str = get_options(str, 9, ints);
2038 #define MAYBE_SET(X,Y) if (ints[0] >= Y && ints[Y] != -1) { X = ints[Y]; }
2039 MAYBE_SET(irq_list[0], 1);
2040 MAYBE_SET(irq_mask, 2);
2041 MAYBE_SET(if_port, 3);
2042 MAYBE_SET(full_duplex, 4);
2043 MAYBE_SET(do_sound, 5);
2044 MAYBE_SET(lockup_hack, 6);
2045 MAYBE_SET(irq_list[1], 7);
2046 MAYBE_SET(irq_list[2], 8);
2047 MAYBE_SET(irq_list[3], 9);
2053 __setup("xirc2ps_cs=", setup_xirc2ps_cs);