vserver 1.9.3
[linux-2.6.git] / drivers / net / ppp_async.c
1 /*
2  * PPP async serial channel driver for Linux.
3  *
4  * Copyright 1999 Paul Mackerras.
5  *
6  *  This program is free software; you can redistribute it and/or
7  *  modify it under the terms of the GNU General Public License
8  *  as published by the Free Software Foundation; either version
9  *  2 of the License, or (at your option) any later version.
10  *
11  * This driver provides the encapsulation and framing for sending
12  * and receiving PPP frames over async serial lines.  It relies on
13  * the generic PPP layer to give it frames to send and to process
14  * received frames.  It implements the PPP line discipline.
15  *
16  * Part of the code in this driver was inspired by the old async-only
17  * PPP driver, written by Michael Callahan and Al Longyear, and
18  * subsequently hacked by Paul Mackerras.
19  */
20
21 #include <linux/module.h>
22 #include <linux/kernel.h>
23 #include <linux/skbuff.h>
24 #include <linux/tty.h>
25 #include <linux/netdevice.h>
26 #include <linux/poll.h>
27 #include <linux/crc-ccitt.h>
28 #include <linux/ppp_defs.h>
29 #include <linux/if_ppp.h>
30 #include <linux/ppp_channel.h>
31 #include <linux/spinlock.h>
32 #include <linux/init.h>
33 #include <asm/uaccess.h>
34
35 #define PPP_VERSION     "2.4.2"
36
37 #define OBUFSIZE        256
38
39 /* Structure for storing local state. */
40 struct asyncppp {
41         struct tty_struct *tty;
42         unsigned int    flags;
43         unsigned int    state;
44         unsigned int    rbits;
45         int             mru;
46         spinlock_t      xmit_lock;
47         spinlock_t      recv_lock;
48         unsigned long   xmit_flags;
49         u32             xaccm[8];
50         u32             raccm;
51         unsigned int    bytes_sent;
52         unsigned int    bytes_rcvd;
53
54         struct sk_buff  *tpkt;
55         int             tpkt_pos;
56         u16             tfcs;
57         unsigned char   *optr;
58         unsigned char   *olim;
59         unsigned long   last_xmit;
60
61         struct sk_buff  *rpkt;
62         int             lcp_fcs;
63         struct sk_buff_head rqueue;
64
65         struct tasklet_struct tsk;
66
67         atomic_t        refcnt;
68         struct semaphore dead_sem;
69         struct ppp_channel chan;        /* interface to generic ppp layer */
70         unsigned char   obuf[OBUFSIZE];
71 };
72
73 /* Bit numbers in xmit_flags */
74 #define XMIT_WAKEUP     0
75 #define XMIT_FULL       1
76 #define XMIT_BUSY       2
77
78 /* State bits */
79 #define SC_TOSS         1
80 #define SC_ESCAPE       2
81 #define SC_PREV_ERROR   4
82
83 /* Bits in rbits */
84 #define SC_RCV_BITS     (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP)
85
86 static int flag_time = HZ;
87 MODULE_PARM(flag_time, "i");
88 MODULE_PARM_DESC(flag_time, "ppp_async: interval between flagged packets (in clock ticks)");
89 MODULE_LICENSE("GPL");
90 MODULE_ALIAS_LDISC(N_PPP);
91
92 /*
93  * Prototypes.
94  */
95 static int ppp_async_encode(struct asyncppp *ap);
96 static int ppp_async_send(struct ppp_channel *chan, struct sk_buff *skb);
97 static int ppp_async_push(struct asyncppp *ap);
98 static void ppp_async_flush_output(struct asyncppp *ap);
99 static void ppp_async_input(struct asyncppp *ap, const unsigned char *buf,
100                             char *flags, int count);
101 static int ppp_async_ioctl(struct ppp_channel *chan, unsigned int cmd,
102                            unsigned long arg);
103 static void ppp_async_process(unsigned long arg);
104
105 static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
106                            int len, int inbound);
107
108 static struct ppp_channel_ops async_ops = {
109         ppp_async_send,
110         ppp_async_ioctl
111 };
112
113 /*
114  * Routines implementing the PPP line discipline.
115  */
116
117 /*
118  * We have a potential race on dereferencing tty->disc_data,
119  * because the tty layer provides no locking at all - thus one
120  * cpu could be running ppp_asynctty_receive while another
121  * calls ppp_asynctty_close, which zeroes tty->disc_data and
122  * frees the memory that ppp_asynctty_receive is using.  The best
123  * way to fix this is to use a rwlock in the tty struct, but for now
124  * we use a single global rwlock for all ttys in ppp line discipline.
125  *
126  * FIXME: this is no longer true. The _close path for the ldisc is 
127  * now guaranteed to be sane. 
128  */
129 static rwlock_t disc_data_lock = RW_LOCK_UNLOCKED;
130
131 static struct asyncppp *ap_get(struct tty_struct *tty)
132 {
133         struct asyncppp *ap;
134
135         read_lock(&disc_data_lock);
136         ap = tty->disc_data;
137         if (ap != NULL)
138                 atomic_inc(&ap->refcnt);
139         read_unlock(&disc_data_lock);
140         return ap;
141 }
142
143 static void ap_put(struct asyncppp *ap)
144 {
145         if (atomic_dec_and_test(&ap->refcnt))
146                 up(&ap->dead_sem);
147 }
148
149 /*
150  * Called when a tty is put into PPP line discipline. Called in process
151  * context.
152  */
153 static int
154 ppp_asynctty_open(struct tty_struct *tty)
155 {
156         struct asyncppp *ap;
157         int err;
158
159         err = -ENOMEM;
160         ap = kmalloc(sizeof(*ap), GFP_KERNEL);
161         if (ap == 0)
162                 goto out;
163
164         /* initialize the asyncppp structure */
165         memset(ap, 0, sizeof(*ap));
166         ap->tty = tty;
167         ap->mru = PPP_MRU;
168         spin_lock_init(&ap->xmit_lock);
169         spin_lock_init(&ap->recv_lock);
170         ap->xaccm[0] = ~0U;
171         ap->xaccm[3] = 0x60000000U;
172         ap->raccm = ~0U;
173         ap->optr = ap->obuf;
174         ap->olim = ap->obuf;
175         ap->lcp_fcs = -1;
176
177         skb_queue_head_init(&ap->rqueue);
178         tasklet_init(&ap->tsk, ppp_async_process, (unsigned long) ap);
179
180         atomic_set(&ap->refcnt, 1);
181         init_MUTEX_LOCKED(&ap->dead_sem);
182
183         ap->chan.private = ap;
184         ap->chan.ops = &async_ops;
185         ap->chan.mtu = PPP_MRU;
186         err = ppp_register_channel(&ap->chan);
187         if (err)
188                 goto out_free;
189
190         tty->disc_data = ap;
191
192         return 0;
193
194  out_free:
195         kfree(ap);
196  out:
197         return err;
198 }
199
200 /*
201  * Called when the tty is put into another line discipline
202  * or it hangs up.  We have to wait for any cpu currently
203  * executing in any of the other ppp_asynctty_* routines to
204  * finish before we can call ppp_unregister_channel and free
205  * the asyncppp struct.  This routine must be called from
206  * process context, not interrupt or softirq context.
207  */
208 static void
209 ppp_asynctty_close(struct tty_struct *tty)
210 {
211         struct asyncppp *ap;
212
213         write_lock_irq(&disc_data_lock);
214         ap = tty->disc_data;
215         tty->disc_data = NULL;
216         write_unlock_irq(&disc_data_lock);
217         if (ap == 0)
218                 return;
219
220         /*
221          * We have now ensured that nobody can start using ap from now
222          * on, but we have to wait for all existing users to finish.
223          * Note that ppp_unregister_channel ensures that no calls to
224          * our channel ops (i.e. ppp_async_send/ioctl) are in progress
225          * by the time it returns.
226          */
227         if (!atomic_dec_and_test(&ap->refcnt))
228                 down(&ap->dead_sem);
229         tasklet_kill(&ap->tsk);
230
231         ppp_unregister_channel(&ap->chan);
232         if (ap->rpkt != 0)
233                 kfree_skb(ap->rpkt);
234         skb_queue_purge(&ap->rqueue);
235         if (ap->tpkt != 0)
236                 kfree_skb(ap->tpkt);
237         kfree(ap);
238 }
239
240 /*
241  * Read does nothing - no data is ever available this way.
242  * Pppd reads and writes packets via /dev/ppp instead.
243  */
244 static ssize_t
245 ppp_asynctty_read(struct tty_struct *tty, struct file *file,
246                   unsigned char __user *buf, size_t count)
247 {
248         return -EAGAIN;
249 }
250
251 /*
252  * Write on the tty does nothing, the packets all come in
253  * from the ppp generic stuff.
254  */
255 static ssize_t
256 ppp_asynctty_write(struct tty_struct *tty, struct file *file,
257                    const unsigned char __user *buf, size_t count)
258 {
259         return -EAGAIN;
260 }
261
262 /*
263  * Called in process context only. May be re-entered by multiple
264  * ioctl calling threads.
265  */
266  
267 static int
268 ppp_asynctty_ioctl(struct tty_struct *tty, struct file *file,
269                    unsigned int cmd, unsigned long arg)
270 {
271         struct asyncppp *ap = ap_get(tty);
272         int err, val;
273         int __user *p = (int __user *)arg;
274
275         if (ap == 0)
276                 return -ENXIO;
277         err = -EFAULT;
278         switch (cmd) {
279         case PPPIOCGCHAN:
280                 err = -ENXIO;
281                 if (ap == 0)
282                         break;
283                 err = -EFAULT;
284                 if (put_user(ppp_channel_index(&ap->chan), p))
285                         break;
286                 err = 0;
287                 break;
288
289         case PPPIOCGUNIT:
290                 err = -ENXIO;
291                 if (ap == 0)
292                         break;
293                 err = -EFAULT;
294                 if (put_user(ppp_unit_number(&ap->chan), p))
295                         break;
296                 err = 0;
297                 break;
298
299         case TCGETS:
300         case TCGETA:
301                 err = n_tty_ioctl(tty, file, cmd, arg);
302                 break;
303
304         case TCFLSH:
305                 /* flush our buffers and the serial port's buffer */
306                 if (arg == TCIOFLUSH || arg == TCOFLUSH)
307                         ppp_async_flush_output(ap);
308                 err = n_tty_ioctl(tty, file, cmd, arg);
309                 break;
310
311         case FIONREAD:
312                 val = 0;
313                 if (put_user(val, p))
314                         break;
315                 err = 0;
316                 break;
317
318         default:
319                 err = -ENOIOCTLCMD;
320         }
321
322         ap_put(ap);
323         return err;
324 }
325
326 /* No kernel lock - fine */
327 static unsigned int
328 ppp_asynctty_poll(struct tty_struct *tty, struct file *file, poll_table *wait)
329 {
330         return 0;
331 }
332
333 static int
334 ppp_asynctty_room(struct tty_struct *tty)
335 {
336         return 65535;
337 }
338
339 /*
340  * This can now be called from hard interrupt level as well
341  * as soft interrupt level or mainline.
342  */
343 static void
344 ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf,
345                   char *cflags, int count)
346 {
347         struct asyncppp *ap = ap_get(tty);
348         unsigned long flags;
349
350         if (ap == 0)
351                 return;
352         spin_lock_irqsave(&ap->recv_lock, flags);
353         ppp_async_input(ap, buf, cflags, count);
354         spin_unlock_irqrestore(&ap->recv_lock, flags);
355         if (skb_queue_len(&ap->rqueue))
356                 tasklet_schedule(&ap->tsk);
357         ap_put(ap);
358         if (test_and_clear_bit(TTY_THROTTLED, &tty->flags)
359             && tty->driver->unthrottle)
360                 tty->driver->unthrottle(tty);
361 }
362
363 static void
364 ppp_asynctty_wakeup(struct tty_struct *tty)
365 {
366         struct asyncppp *ap = ap_get(tty);
367
368         clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
369         if (ap == 0)
370                 return;
371         set_bit(XMIT_WAKEUP, &ap->xmit_flags);
372         tasklet_schedule(&ap->tsk);
373         ap_put(ap);
374 }
375
376
377 static struct tty_ldisc ppp_ldisc = {
378         .owner  = THIS_MODULE,
379         .magic  = TTY_LDISC_MAGIC,
380         .name   = "ppp",
381         .open   = ppp_asynctty_open,
382         .close  = ppp_asynctty_close,
383         .read   = ppp_asynctty_read,
384         .write  = ppp_asynctty_write,
385         .ioctl  = ppp_asynctty_ioctl,
386         .poll   = ppp_asynctty_poll,
387         .receive_room = ppp_asynctty_room,
388         .receive_buf = ppp_asynctty_receive,
389         .write_wakeup = ppp_asynctty_wakeup,
390 };
391
392 static int __init
393 ppp_async_init(void)
394 {
395         int err;
396
397         err = tty_register_ldisc(N_PPP, &ppp_ldisc);
398         if (err != 0)
399                 printk(KERN_ERR "PPP_async: error %d registering line disc.\n",
400                        err);
401         return err;
402 }
403
404 /*
405  * The following routines provide the PPP channel interface.
406  */
407 static int
408 ppp_async_ioctl(struct ppp_channel *chan, unsigned int cmd, unsigned long arg)
409 {
410         struct asyncppp *ap = chan->private;
411         void __user *argp = (void __user *)arg;
412         int __user *p = argp;
413         int err, val;
414         u32 accm[8];
415
416         err = -EFAULT;
417         switch (cmd) {
418         case PPPIOCGFLAGS:
419                 val = ap->flags | ap->rbits;
420                 if (put_user(val, p))
421                         break;
422                 err = 0;
423                 break;
424         case PPPIOCSFLAGS:
425                 if (get_user(val, p))
426                         break;
427                 ap->flags = val & ~SC_RCV_BITS;
428                 spin_lock_irq(&ap->recv_lock);
429                 ap->rbits = val & SC_RCV_BITS;
430                 spin_unlock_irq(&ap->recv_lock);
431                 err = 0;
432                 break;
433
434         case PPPIOCGASYNCMAP:
435                 if (put_user(ap->xaccm[0], (u32 __user *)argp))
436                         break;
437                 err = 0;
438                 break;
439         case PPPIOCSASYNCMAP:
440                 if (get_user(ap->xaccm[0], (u32 __user *)argp))
441                         break;
442                 err = 0;
443                 break;
444
445         case PPPIOCGRASYNCMAP:
446                 if (put_user(ap->raccm, (u32 __user *)argp))
447                         break;
448                 err = 0;
449                 break;
450         case PPPIOCSRASYNCMAP:
451                 if (get_user(ap->raccm, (u32 __user *)argp))
452                         break;
453                 err = 0;
454                 break;
455
456         case PPPIOCGXASYNCMAP:
457                 if (copy_to_user(argp, ap->xaccm, sizeof(ap->xaccm)))
458                         break;
459                 err = 0;
460                 break;
461         case PPPIOCSXASYNCMAP:
462                 if (copy_from_user(accm, argp, sizeof(accm)))
463                         break;
464                 accm[2] &= ~0x40000000U;        /* can't escape 0x5e */
465                 accm[3] |= 0x60000000U;         /* must escape 0x7d, 0x7e */
466                 memcpy(ap->xaccm, accm, sizeof(ap->xaccm));
467                 err = 0;
468                 break;
469
470         case PPPIOCGMRU:
471                 if (put_user(ap->mru, p))
472                         break;
473                 err = 0;
474                 break;
475         case PPPIOCSMRU:
476                 if (get_user(val, p))
477                         break;
478                 if (val < PPP_MRU)
479                         val = PPP_MRU;
480                 ap->mru = val;
481                 err = 0;
482                 break;
483
484         default:
485                 err = -ENOTTY;
486         }
487
488         return err;
489 }
490
491 /*
492  * This is called at softirq level to deliver received packets
493  * to the ppp_generic code, and to tell the ppp_generic code
494  * if we can accept more output now.
495  */
496 static void ppp_async_process(unsigned long arg)
497 {
498         struct asyncppp *ap = (struct asyncppp *) arg;
499         struct sk_buff *skb;
500
501         /* process received packets */
502         while ((skb = skb_dequeue(&ap->rqueue)) != NULL) {
503                 if (skb->cb[0])
504                         ppp_input_error(&ap->chan, 0);
505                 ppp_input(&ap->chan, skb);
506         }
507
508         /* try to push more stuff out */
509         if (test_bit(XMIT_WAKEUP, &ap->xmit_flags) && ppp_async_push(ap))
510                 ppp_output_wakeup(&ap->chan);
511 }
512
513 /*
514  * Procedures for encapsulation and framing.
515  */
516
517 /*
518  * Procedure to encode the data for async serial transmission.
519  * Does octet stuffing (escaping), puts the address/control bytes
520  * on if A/C compression is disabled, and does protocol compression.
521  * Assumes ap->tpkt != 0 on entry.
522  * Returns 1 if we finished the current frame, 0 otherwise.
523  */
524
525 #define PUT_BYTE(ap, buf, c, islcp)     do {            \
526         if ((islcp && c < 0x20) || (ap->xaccm[c >> 5] & (1 << (c & 0x1f)))) {\
527                 *buf++ = PPP_ESCAPE;                    \
528                 *buf++ = c ^ 0x20;                      \
529         } else                                          \
530                 *buf++ = c;                             \
531 } while (0)
532
533 static int
534 ppp_async_encode(struct asyncppp *ap)
535 {
536         int fcs, i, count, c, proto;
537         unsigned char *buf, *buflim;
538         unsigned char *data;
539         int islcp;
540
541         buf = ap->obuf;
542         ap->olim = buf;
543         ap->optr = buf;
544         i = ap->tpkt_pos;
545         data = ap->tpkt->data;
546         count = ap->tpkt->len;
547         fcs = ap->tfcs;
548         proto = (data[0] << 8) + data[1];
549
550         /*
551          * LCP packets with code values between 1 (configure-reqest)
552          * and 7 (code-reject) must be sent as though no options
553          * had been negotiated.
554          */
555         islcp = proto == PPP_LCP && 1 <= data[2] && data[2] <= 7;
556
557         if (i == 0) {
558                 if (islcp)
559                         async_lcp_peek(ap, data, count, 0);
560
561                 /*
562                  * Start of a new packet - insert the leading FLAG
563                  * character if necessary.
564                  */
565                 if (islcp || flag_time == 0
566                     || jiffies - ap->last_xmit >= flag_time)
567                         *buf++ = PPP_FLAG;
568                 ap->last_xmit = jiffies;
569                 fcs = PPP_INITFCS;
570
571                 /*
572                  * Put in the address/control bytes if necessary
573                  */
574                 if ((ap->flags & SC_COMP_AC) == 0 || islcp) {
575                         PUT_BYTE(ap, buf, 0xff, islcp);
576                         fcs = PPP_FCS(fcs, 0xff);
577                         PUT_BYTE(ap, buf, 0x03, islcp);
578                         fcs = PPP_FCS(fcs, 0x03);
579                 }
580         }
581
582         /*
583          * Once we put in the last byte, we need to put in the FCS
584          * and closing flag, so make sure there is at least 7 bytes
585          * of free space in the output buffer.
586          */
587         buflim = ap->obuf + OBUFSIZE - 6;
588         while (i < count && buf < buflim) {
589                 c = data[i++];
590                 if (i == 1 && c == 0 && (ap->flags & SC_COMP_PROT))
591                         continue;       /* compress protocol field */
592                 fcs = PPP_FCS(fcs, c);
593                 PUT_BYTE(ap, buf, c, islcp);
594         }
595
596         if (i < count) {
597                 /*
598                  * Remember where we are up to in this packet.
599                  */
600                 ap->olim = buf;
601                 ap->tpkt_pos = i;
602                 ap->tfcs = fcs;
603                 return 0;
604         }
605
606         /*
607          * We have finished the packet.  Add the FCS and flag.
608          */
609         fcs = ~fcs;
610         c = fcs & 0xff;
611         PUT_BYTE(ap, buf, c, islcp);
612         c = (fcs >> 8) & 0xff;
613         PUT_BYTE(ap, buf, c, islcp);
614         *buf++ = PPP_FLAG;
615         ap->olim = buf;
616
617         kfree_skb(ap->tpkt);
618         ap->tpkt = NULL;
619         return 1;
620 }
621
622 /*
623  * Transmit-side routines.
624  */
625
626 /*
627  * Send a packet to the peer over an async tty line.
628  * Returns 1 iff the packet was accepted.
629  * If the packet was not accepted, we will call ppp_output_wakeup
630  * at some later time.
631  */
632 static int
633 ppp_async_send(struct ppp_channel *chan, struct sk_buff *skb)
634 {
635         struct asyncppp *ap = chan->private;
636
637         ppp_async_push(ap);
638
639         if (test_and_set_bit(XMIT_FULL, &ap->xmit_flags))
640                 return 0;       /* already full */
641         ap->tpkt = skb;
642         ap->tpkt_pos = 0;
643
644         ppp_async_push(ap);
645         return 1;
646 }
647
648 /*
649  * Push as much data as possible out to the tty.
650  */
651 static int
652 ppp_async_push(struct asyncppp *ap)
653 {
654         int avail, sent, done = 0;
655         struct tty_struct *tty = ap->tty;
656         int tty_stuffed = 0;
657
658         /*
659          * We can get called recursively here if the tty write
660          * function calls our wakeup function.  This can happen
661          * for example on a pty with both the master and slave
662          * set to PPP line discipline.
663          * We use the XMIT_BUSY bit to detect this and get out,
664          * leaving the XMIT_WAKEUP bit set to tell the other
665          * instance that it may now be able to write more now.
666          */
667         if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
668                 return 0;
669         spin_lock_bh(&ap->xmit_lock);
670         for (;;) {
671                 if (test_and_clear_bit(XMIT_WAKEUP, &ap->xmit_flags))
672                         tty_stuffed = 0;
673                 if (!tty_stuffed && ap->optr < ap->olim) {
674                         avail = ap->olim - ap->optr;
675                         set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
676                         sent = tty->driver->write(tty, 0, ap->optr, avail);
677                         if (sent < 0)
678                                 goto flush;     /* error, e.g. loss of CD */
679                         ap->optr += sent;
680                         if (sent < avail)
681                                 tty_stuffed = 1;
682                         continue;
683                 }
684                 if (ap->optr >= ap->olim && ap->tpkt != 0) {
685                         if (ppp_async_encode(ap)) {
686                                 /* finished processing ap->tpkt */
687                                 clear_bit(XMIT_FULL, &ap->xmit_flags);
688                                 done = 1;
689                         }
690                         continue;
691                 }
692                 /*
693                  * We haven't made any progress this time around.
694                  * Clear XMIT_BUSY to let other callers in, but
695                  * after doing so we have to check if anyone set
696                  * XMIT_WAKEUP since we last checked it.  If they
697                  * did, we should try again to set XMIT_BUSY and go
698                  * around again in case XMIT_BUSY was still set when
699                  * the other caller tried.
700                  */
701                 clear_bit(XMIT_BUSY, &ap->xmit_flags);
702                 /* any more work to do? if not, exit the loop */
703                 if (!(test_bit(XMIT_WAKEUP, &ap->xmit_flags)
704                       || (!tty_stuffed && ap->tpkt != 0)))
705                         break;
706                 /* more work to do, see if we can do it now */
707                 if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
708                         break;
709         }
710         spin_unlock_bh(&ap->xmit_lock);
711         return done;
712
713 flush:
714         clear_bit(XMIT_BUSY, &ap->xmit_flags);
715         if (ap->tpkt != 0) {
716                 kfree_skb(ap->tpkt);
717                 ap->tpkt = NULL;
718                 clear_bit(XMIT_FULL, &ap->xmit_flags);
719                 done = 1;
720         }
721         ap->optr = ap->olim;
722         spin_unlock_bh(&ap->xmit_lock);
723         return done;
724 }
725
726 /*
727  * Flush output from our internal buffers.
728  * Called for the TCFLSH ioctl. Can be entered in parallel
729  * but this is covered by the xmit_lock.
730  */
731 static void
732 ppp_async_flush_output(struct asyncppp *ap)
733 {
734         int done = 0;
735
736         spin_lock_bh(&ap->xmit_lock);
737         ap->optr = ap->olim;
738         if (ap->tpkt != NULL) {
739                 kfree_skb(ap->tpkt);
740                 ap->tpkt = NULL;
741                 clear_bit(XMIT_FULL, &ap->xmit_flags);
742                 done = 1;
743         }
744         spin_unlock_bh(&ap->xmit_lock);
745         if (done)
746                 ppp_output_wakeup(&ap->chan);
747 }
748
749 /*
750  * Receive-side routines.
751  */
752
753 /* see how many ordinary chars there are at the start of buf */
754 static inline int
755 scan_ordinary(struct asyncppp *ap, const unsigned char *buf, int count)
756 {
757         int i, c;
758
759         for (i = 0; i < count; ++i) {
760                 c = buf[i];
761                 if (c == PPP_ESCAPE || c == PPP_FLAG
762                     || (c < 0x20 && (ap->raccm & (1 << c)) != 0))
763                         break;
764         }
765         return i;
766 }
767
768 /* called when a flag is seen - do end-of-packet processing */
769 static void
770 process_input_packet(struct asyncppp *ap)
771 {
772         struct sk_buff *skb;
773         unsigned char *p;
774         unsigned int len, fcs, proto;
775
776         skb = ap->rpkt;
777         if (ap->state & (SC_TOSS | SC_ESCAPE))
778                 goto err;
779
780         if (skb == NULL)
781                 return;         /* 0-length packet */
782
783         /* check the FCS */
784         p = skb->data;
785         len = skb->len;
786         if (len < 3)
787                 goto err;       /* too short */
788         fcs = PPP_INITFCS;
789         for (; len > 0; --len)
790                 fcs = PPP_FCS(fcs, *p++);
791         if (fcs != PPP_GOODFCS)
792                 goto err;       /* bad FCS */
793         skb_trim(skb, skb->len - 2);
794
795         /* check for address/control and protocol compression */
796         p = skb->data;
797         if (p[0] == PPP_ALLSTATIONS && p[1] == PPP_UI) {
798                 /* chop off address/control */
799                 if (skb->len < 3)
800                         goto err;
801                 p = skb_pull(skb, 2);
802         }
803         proto = p[0];
804         if (proto & 1) {
805                 /* protocol is compressed */
806                 skb_push(skb, 1)[0] = 0;
807         } else {
808                 if (skb->len < 2)
809                         goto err;
810                 proto = (proto << 8) + p[1];
811                 if (proto == PPP_LCP)
812                         async_lcp_peek(ap, p, skb->len, 1);
813         }
814
815         /* queue the frame to be processed */
816         skb->cb[0] = ap->state;
817         skb_queue_tail(&ap->rqueue, skb);
818         ap->rpkt = NULL;
819         ap->state = 0;
820         return;
821
822  err:
823         /* frame had an error, remember that, reset SC_TOSS & SC_ESCAPE */
824         ap->state = SC_PREV_ERROR;
825         if (skb)
826                 skb_trim(skb, 0);
827 }
828
829 /* Called when the tty driver has data for us. Runs parallel with the
830    other ldisc functions but will not be re-entered */
831
832 static void
833 ppp_async_input(struct asyncppp *ap, const unsigned char *buf,
834                 char *flags, int count)
835 {
836         struct sk_buff *skb;
837         int c, i, j, n, s, f;
838         unsigned char *sp;
839
840         /* update bits used for 8-bit cleanness detection */
841         if (~ap->rbits & SC_RCV_BITS) {
842                 s = 0;
843                 for (i = 0; i < count; ++i) {
844                         c = buf[i];
845                         if (flags != 0 && flags[i] != 0)
846                                 continue;
847                         s |= (c & 0x80)? SC_RCV_B7_1: SC_RCV_B7_0;
848                         c = ((c >> 4) ^ c) & 0xf;
849                         s |= (0x6996 & (1 << c))? SC_RCV_ODDP: SC_RCV_EVNP;
850                 }
851                 ap->rbits |= s;
852         }
853
854         while (count > 0) {
855                 /* scan through and see how many chars we can do in bulk */
856                 if ((ap->state & SC_ESCAPE) && buf[0] == PPP_ESCAPE)
857                         n = 1;
858                 else
859                         n = scan_ordinary(ap, buf, count);
860
861                 f = 0;
862                 if (flags != 0 && (ap->state & SC_TOSS) == 0) {
863                         /* check the flags to see if any char had an error */
864                         for (j = 0; j < n; ++j)
865                                 if ((f = flags[j]) != 0)
866                                         break;
867                 }
868                 if (f != 0) {
869                         /* start tossing */
870                         ap->state |= SC_TOSS;
871
872                 } else if (n > 0 && (ap->state & SC_TOSS) == 0) {
873                         /* stuff the chars in the skb */
874                         skb = ap->rpkt;
875                         if (skb == 0) {
876                                 skb = dev_alloc_skb(ap->mru + PPP_HDRLEN + 2);
877                                 if (skb == 0)
878                                         goto nomem;
879                                 /* Try to get the payload 4-byte aligned */
880                                 if (buf[0] != PPP_ALLSTATIONS)
881                                         skb_reserve(skb, 2 + (buf[0] & 1));
882                                 ap->rpkt = skb;
883                         }
884                         if (n > skb_tailroom(skb)) {
885                                 /* packet overflowed MRU */
886                                 ap->state |= SC_TOSS;
887                         } else {
888                                 sp = skb_put(skb, n);
889                                 memcpy(sp, buf, n);
890                                 if (ap->state & SC_ESCAPE) {
891                                         sp[0] ^= 0x20;
892                                         ap->state &= ~SC_ESCAPE;
893                                 }
894                         }
895                 }
896
897                 if (n >= count)
898                         break;
899
900                 c = buf[n];
901                 if (c == PPP_FLAG) {
902                         process_input_packet(ap);
903                 } else if (c == PPP_ESCAPE) {
904                         ap->state |= SC_ESCAPE;
905                 } else if (I_IXON(ap->tty)) {
906                         if (c == START_CHAR(ap->tty))
907                                 start_tty(ap->tty);
908                         else if (c == STOP_CHAR(ap->tty))
909                                 stop_tty(ap->tty);
910                 }
911                 /* otherwise it's a char in the recv ACCM */
912                 ++n;
913
914                 buf += n;
915                 if (flags != 0)
916                         flags += n;
917                 count -= n;
918         }
919         return;
920
921  nomem:
922         printk(KERN_ERR "PPPasync: no memory (input pkt)\n");
923         ap->state |= SC_TOSS;
924 }
925
926 /*
927  * We look at LCP frames going past so that we can notice
928  * and react to the LCP configure-ack from the peer.
929  * In the situation where the peer has been sent a configure-ack
930  * already, LCP is up once it has sent its configure-ack
931  * so the immediately following packet can be sent with the
932  * configured LCP options.  This allows us to process the following
933  * packet correctly without pppd needing to respond quickly.
934  *
935  * We only respond to the received configure-ack if we have just
936  * sent a configure-request, and the configure-ack contains the
937  * same data (this is checked using a 16-bit crc of the data).
938  */
939 #define CONFREQ         1       /* LCP code field values */
940 #define CONFACK         2
941 #define LCP_MRU         1       /* LCP option numbers */
942 #define LCP_ASYNCMAP    2
943
944 static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
945                            int len, int inbound)
946 {
947         int dlen, fcs, i, code;
948         u32 val;
949
950         data += 2;              /* skip protocol bytes */
951         len -= 2;
952         if (len < 4)            /* 4 = code, ID, length */
953                 return;
954         code = data[0];
955         if (code != CONFACK && code != CONFREQ)
956                 return;
957         dlen = (data[2] << 8) + data[3];
958         if (len < dlen)
959                 return;         /* packet got truncated or length is bogus */
960
961         if (code == (inbound? CONFACK: CONFREQ)) {
962                 /*
963                  * sent confreq or received confack:
964                  * calculate the crc of the data from the ID field on.
965                  */
966                 fcs = PPP_INITFCS;
967                 for (i = 1; i < dlen; ++i)
968                         fcs = PPP_FCS(fcs, data[i]);
969
970                 if (!inbound) {
971                         /* outbound confreq - remember the crc for later */
972                         ap->lcp_fcs = fcs;
973                         return;
974                 }
975
976                 /* received confack, check the crc */
977                 fcs ^= ap->lcp_fcs;
978                 ap->lcp_fcs = -1;
979                 if (fcs != 0)
980                         return;
981         } else if (inbound)
982                 return; /* not interested in received confreq */
983
984         /* process the options in the confack */
985         data += 4;
986         dlen -= 4;
987         /* data[0] is code, data[1] is length */
988         while (dlen >= 2 && dlen >= data[1]) {
989                 switch (data[0]) {
990                 case LCP_MRU:
991                         val = (data[2] << 8) + data[3];
992                         if (inbound)
993                                 ap->mru = val;
994                         else
995                                 ap->chan.mtu = val;
996                         break;
997                 case LCP_ASYNCMAP:
998                         val = (data[2] << 24) + (data[3] << 16)
999                                 + (data[4] << 8) + data[5];
1000                         if (inbound)
1001                                 ap->raccm = val;
1002                         else
1003                                 ap->xaccm[0] = val;
1004                         break;
1005                 }
1006                 dlen -= data[1];
1007                 data += data[1];
1008         }
1009 }
1010
1011 static void __exit ppp_async_cleanup(void)
1012 {
1013         if (tty_register_ldisc(N_PPP, NULL) != 0)
1014                 printk(KERN_ERR "failed to unregister PPP line discipline\n");
1015 }
1016
1017 module_init(ppp_async_init);
1018 module_exit(ppp_async_cleanup);