drivers/net/tulip/media.c

   1 /*
   2         drivers/net/tulip/media.c
   3
   4         Maintained by Jeff Garzik <jgarzik@pobox.com>
   5         Copyright 2000,2001  The Linux Kernel Team
   6         Written/copyright 1994-2001 by Donald Becker.
   7
   8         This software may be used and distributed according to the terms
   9         of the GNU General Public License, incorporated herein by reference.
  10
  11         Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
  12         for more information on this driver, or visit the project
  13         Web page at http://sourceforge.net/projects/tulip/
  14
  15 */
  16
  17 #include <linux/kernel.h>
  18 #include <linux/mii.h>
  19 #include <linux/init.h>
  20 #include <linux/delay.h>
  21 #include "tulip.h"
  22
  23
  24 /* The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
  25    met by back-to-back PCI I/O cycles, but we insert a delay to avoid
  26    "overclocking" issues or future 66Mhz PCI. */
  27 #define mdio_delay() inl(mdio_addr)
  28
  29 /* Read and write the MII registers using software-generated serial
  30    MDIO protocol.  It is just different enough from the EEPROM protocol
  31    to not share code.  The maxium data clock rate is 2.5 Mhz. */
  32 #define MDIO_SHIFT_CLK          0x10000
  33 #define MDIO_DATA_WRITE0        0x00000
  34 #define MDIO_DATA_WRITE1        0x20000
  35 #define MDIO_ENB                0x00000 /* Ignore the 0x02000 databook setting. */
  36 #define MDIO_ENB_IN             0x40000
  37 #define MDIO_DATA_READ          0x80000
  38
  39 static const unsigned char comet_miireg2offset[32] = {
  40         0xB4, 0xB8, 0xBC, 0xC0,  0xC4, 0xC8, 0xCC, 0,  0,0,0,0,  0,0,0,0,
  41         0,0xD0,0,0,  0,0,0,0,  0,0,0,0, 0, 0xD4, 0xD8, 0xDC, };
  42
  43
  44 /* MII transceiver control section.
  45    Read and write the MII registers using software-generated serial
  46    MDIO protocol.  See the MII specifications or DP83840A data sheet
  47    for details. */
  48
  49 int tulip_mdio_read(struct net_device *dev, int phy_id, int location)
  50 {
  51         struct tulip_private *tp = netdev_priv(dev);
  52         int i;
  53         int read_cmd = (0xf6 << 10) | ((phy_id & 0x1f) << 5) | location;
  54         int retval = 0;
  55         long ioaddr = dev->base_addr;
  56         long mdio_addr = ioaddr + CSR9;
  57         unsigned long flags;
  58
  59         if (location & ~0x1f)
  60                 return 0xffff;
  61
  62         if (tp->chip_id == COMET  &&  phy_id == 30) {
  63                 if (comet_miireg2offset[location])
  64                         return inl(ioaddr + comet_miireg2offset[location]);
  65                 return 0xffff;
  66         }
  67
  68         spin_lock_irqsave(&tp->mii_lock, flags);
  69         if (tp->chip_id == LC82C168) {
  70                 int i = 1000;
  71                 outl(0x60020000 + (phy_id<<23) + (location<<18), ioaddr + 0xA0);
  72                 inl(ioaddr + 0xA0);
  73                 inl(ioaddr + 0xA0);
  74                 while (--i > 0) {
  75                         barrier();
  76                         if ( ! ((retval = inl(ioaddr + 0xA0)) & 0x80000000))
  77                                 break;
  78                 }
  79                 spin_unlock_irqrestore(&tp->mii_lock, flags);
  80                 return retval & 0xffff;
  81         }
  82
  83         /* Establish sync by sending at least 32 logic ones. */
  84         for (i = 32; i >= 0; i--) {
  85                 outl(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr);
  86                 mdio_delay();
  87                 outl(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
  88                 mdio_delay();
  89         }
  90         /* Shift the read command bits out. */
  91         for (i = 15; i >= 0; i--) {
  92                 int dataval = (read_cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0;
  93
  94                 outl(MDIO_ENB | dataval, mdio_addr);
  95                 mdio_delay();
  96                 outl(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr);
  97                 mdio_delay();
  98         }
  99         /* Read the two transition, 16 data, and wire-idle bits. */
 100         for (i = 19; i > 0; i--) {
 101                 outl(MDIO_ENB_IN, mdio_addr);
 102                 mdio_delay();
 103                 retval = (retval << 1) | ((inl(mdio_addr) & MDIO_DATA_READ) ? 1 : 0);
 104                 outl(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
 105                 mdio_delay();
 106         }
 107
 108         spin_unlock_irqrestore(&tp->mii_lock, flags);
 109         return (retval>>1) & 0xffff;
 110 }
 111
 112 void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val)
 113 {
 114         struct tulip_private *tp = netdev_priv(dev);
 115         int i;
 116         int cmd = (0x5002 << 16) | ((phy_id & 0x1f) << 23) | (location<<18) | (val & 0xffff);
 117         long ioaddr = dev->base_addr;
 118         long mdio_addr = ioaddr + CSR9;
 119         unsigned long flags;
 120
 121         if (location & ~0x1f)
 122                 return;
 123
 124         if (tp->chip_id == COMET && phy_id == 30) {
 125                 if (comet_miireg2offset[location])
 126                         outl(val, ioaddr + comet_miireg2offset[location]);
 127                 return;
 128         }
 129
 130         spin_lock_irqsave(&tp->mii_lock, flags);
 131         if (tp->chip_id == LC82C168) {
 132                 int i = 1000;
 133                 outl(cmd, ioaddr + 0xA0);
 134                 do {
 135                         barrier();
 136                         if ( ! (inl(ioaddr + 0xA0) & 0x80000000))
 137                                 break;
 138                 } while (--i > 0);
 139                 spin_unlock_irqrestore(&tp->mii_lock, flags);
 140                 return;
 141         }
 142
 143         /* Establish sync by sending 32 logic ones. */
 144         for (i = 32; i >= 0; i--) {
 145                 outl(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr);
 146                 mdio_delay();
 147                 outl(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
 148                 mdio_delay();
 149         }
 150         /* Shift the command bits out. */
 151         for (i = 31; i >= 0; i--) {
 152                 int dataval = (cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0;
 153                 outl(MDIO_ENB | dataval, mdio_addr);
 154                 mdio_delay();
 155                 outl(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr);
 156                 mdio_delay();
 157         }
 158         /* Clear out extra bits. */
 159         for (i = 2; i > 0; i--) {
 160                 outl(MDIO_ENB_IN, mdio_addr);
 161                 mdio_delay();
 162                 outl(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
 163                 mdio_delay();
 164         }
 165
 166         spin_unlock_irqrestore(&tp->mii_lock, flags);
 167 }
 168
 169
 170 /* Set up the transceiver control registers for the selected media type. */
 171 void tulip_select_media(struct net_device *dev, int startup)
 172 {
 173         long ioaddr = dev->base_addr;
 174         struct tulip_private *tp = netdev_priv(dev);
 175         struct mediatable *mtable = tp->mtable;
 176         u32 new_csr6;
 177         int i;
 178
 179         if (mtable) {
 180                 struct medialeaf *mleaf = &mtable->mleaf[tp->cur_index];
 181                 unsigned char *p = mleaf->leafdata;
 182                 switch (mleaf->type) {
 183                 case 0:                                 /* 21140 non-MII xcvr. */
 184                         if (tulip_debug > 1)
 185                                 printk(KERN_DEBUG "%s: Using a 21140 non-MII transceiver"
 186                                            " with control setting %2.2x.\n",
 187                                            dev->name, p[1]);
 188                         dev->if_port = p[0];
 189                         if (startup)
 190                                 outl(mtable->csr12dir | 0x100, ioaddr + CSR12);
 191                         outl(p[1], ioaddr + CSR12);
 192                         new_csr6 = 0x02000000 | ((p[2] & 0x71) << 18);
 193                         break;
 194                 case 2: case 4: {
 195                         u16 setup[5];
 196                         u32 csr13val, csr14val, csr15dir, csr15val;
 197                         for (i = 0; i < 5; i++)
 198                                 setup[i] = get_u16(&p[i*2 + 1]);
 199
 200                         dev->if_port = p[0] & MEDIA_MASK;
 201                         if (tulip_media_cap[dev->if_port] & MediaAlwaysFD)
 202                                 tp->full_duplex = 1;
 203
 204                         if (startup && mtable->has_reset) {
 205                                 struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
 206                                 unsigned char *rst = rleaf->leafdata;
 207                                 if (tulip_debug > 1)
 208                                         printk(KERN_DEBUG "%s: Resetting the transceiver.\n",
 209                                                    dev->name);
 210                                 for (i = 0; i < rst[0]; i++)
 211                                         outl(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
 212                         }
 213                         if (tulip_debug > 1)
 214                                 printk(KERN_DEBUG "%s: 21143 non-MII %s transceiver control "
 215                                            "%4.4x/%4.4x.\n",
 216                                            dev->name, medianame[dev->if_port], setup[0], setup[1]);
 217                         if (p[0] & 0x40) {      /* SIA (CSR13-15) setup values are provided. */
 218                                 csr13val = setup[0];
 219                                 csr14val = setup[1];
 220                                 csr15dir = (setup[3]<<16) | setup[2];
 221                                 csr15val = (setup[4]<<16) | setup[2];
 222                                 outl(0, ioaddr + CSR13);
 223                                 outl(csr14val, ioaddr + CSR14);
 224                                 outl(csr15dir, ioaddr + CSR15); /* Direction */
 225                                 outl(csr15val, ioaddr + CSR15); /* Data */
 226                                 outl(csr13val, ioaddr + CSR13);
 227                         } else {
 228                                 csr13val = 1;
 229                                 csr14val = 0;
 230                                 csr15dir = (setup[0]<<16) | 0x0008;
 231                                 csr15val = (setup[1]<<16) | 0x0008;
 232                                 if (dev->if_port <= 4)
 233                                         csr14val = t21142_csr14[dev->if_port];
 234                                 if (startup) {
 235                                         outl(0, ioaddr + CSR13);
 236                                         outl(csr14val, ioaddr + CSR14);
 237                                 }
 238                                 outl(csr15dir, ioaddr + CSR15); /* Direction */
 239                                 outl(csr15val, ioaddr + CSR15); /* Data */
 240                                 if (startup) outl(csr13val, ioaddr + CSR13);
 241                         }
 242                         if (tulip_debug > 1)
 243                                 printk(KERN_DEBUG "%s:  Setting CSR15 to %8.8x/%8.8x.\n",
 244                                            dev->name, csr15dir, csr15val);
 245                         if (mleaf->type == 4)
 246                                 new_csr6 = 0x82020000 | ((setup[2] & 0x71) << 18);
 247                         else
 248                                 new_csr6 = 0x82420000;
 249                         break;
 250                 }
 251                 case 1: case 3: {
 252                         int phy_num = p[0];
 253                         int init_length = p[1];
 254                         u16 *misc_info, tmp_info;
 255
 256                         dev->if_port = 11;
 257                         new_csr6 = 0x020E0000;
 258                         if (mleaf->type == 3) { /* 21142 */
 259                                 u16 *init_sequence = (u16*)(p+2);
 260                                 u16 *reset_sequence = &((u16*)(p+3))[init_length];
 261                                 int reset_length = p[2 + init_length*2];
 262                                 misc_info = reset_sequence + reset_length;
 263                                 if (startup)
 264                                         for (i = 0; i < reset_length; i++)
 265                                                 outl(get_u16(&reset_sequence[i]) << 16, ioaddr + CSR15);
 266                                 for (i = 0; i < init_length; i++)
 267                                         outl(get_u16(&init_sequence[i]) << 16, ioaddr + CSR15);
 268                         } else {
 269                                 u8 *init_sequence = p + 2;
 270                                 u8 *reset_sequence = p + 3 + init_length;
 271                                 int reset_length = p[2 + init_length];
 272                                 misc_info = (u16*)(reset_sequence + reset_length);
 273                                 if (startup) {
 274                                         outl(mtable->csr12dir | 0x100, ioaddr + CSR12);
 275                                         for (i = 0; i < reset_length; i++)
 276                                                 outl(reset_sequence[i], ioaddr + CSR12);
 277                                 }
 278                                 for (i = 0; i < init_length; i++)
 279                                         outl(init_sequence[i], ioaddr + CSR12);
 280                         }
 281                         tmp_info = get_u16(&misc_info[1]);
 282                         if (tmp_info)
 283                                 tp->advertising[phy_num] = tmp_info | 1;
 284                         if (tmp_info && startup < 2) {
 285                                 if (tp->mii_advertise == 0)
 286                                         tp->mii_advertise = tp->advertising[phy_num];
 287                                 if (tulip_debug > 1)
 288                                         printk(KERN_DEBUG "%s:  Advertising %4.4x on MII %d.\n",
 289                                                dev->name, tp->mii_advertise, tp->phys[phy_num]);
 290                                 tulip_mdio_write(dev, tp->phys[phy_num], 4, tp->mii_advertise);
 291                         }
 292                         break;
 293                 }
 294                 case 5: case 6: {
 295                         u16 setup[5];
 296
 297                         new_csr6 = 0; /* FIXME */
 298
 299                         for (i = 0; i < 5; i++)
 300                                 setup[i] = get_u16(&p[i*2 + 1]);
 301
 302                         if (startup && mtable->has_reset) {
 303                                 struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
 304                                 unsigned char *rst = rleaf->leafdata;
 305                                 if (tulip_debug > 1)
 306                                         printk(KERN_DEBUG "%s: Resetting the transceiver.\n",
 307                                                    dev->name);
 308                                 for (i = 0; i < rst[0]; i++)
 309                                         outl(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
 310                         }
 311
 312                         break;
 313                 }
 314                 default:
 315                         printk(KERN_DEBUG "%s:  Invalid media table selection %d.\n",
 316                                            dev->name, mleaf->type);
 317                         new_csr6 = 0x020E0000;
 318                 }
 319                 if (tulip_debug > 1)
 320                         printk(KERN_DEBUG "%s: Using media type %s, CSR12 is %2.2x.\n",
 321                                    dev->name, medianame[dev->if_port],
 322                                    inl(ioaddr + CSR12) & 0xff);
 323         } else if (tp->chip_id == LC82C168) {
 324                 if (startup && ! tp->medialock)
 325                         dev->if_port = tp->mii_cnt ? 11 : 0;
 326                 if (tulip_debug > 1)
 327                         printk(KERN_DEBUG "%s: PNIC PHY status is %3.3x, media %s.\n",
 328                                    dev->name, inl(ioaddr + 0xB8), medianame[dev->if_port]);
 329                 if (tp->mii_cnt) {
 330                         new_csr6 = 0x810C0000;
 331                         outl(0x0001, ioaddr + CSR15);
 332                         outl(0x0201B07A, ioaddr + 0xB8);
 333                 } else if (startup) {
 334                         /* Start with 10mbps to do autonegotiation. */
 335                         outl(0x32, ioaddr + CSR12);
 336                         new_csr6 = 0x00420000;
 337                         outl(0x0001B078, ioaddr + 0xB8);
 338                         outl(0x0201B078, ioaddr + 0xB8);
 339                 } else if (dev->if_port == 3  ||  dev->if_port == 5) {
 340                         outl(0x33, ioaddr + CSR12);
 341                         new_csr6 = 0x01860000;
 342                         /* Trigger autonegotiation. */
 343                         outl(startup ? 0x0201F868 : 0x0001F868, ioaddr + 0xB8);
 344                 } else {
 345                         outl(0x32, ioaddr + CSR12);
 346                         new_csr6 = 0x00420000;
 347                         outl(0x1F078, ioaddr + 0xB8);
 348                 }
 349         } else {                                        /* Unknown chip type with no media table. */
 350                 if (tp->default_port == 0)
 351                         dev->if_port = tp->mii_cnt ? 11 : 3;
 352                 if (tulip_media_cap[dev->if_port] & MediaIsMII) {
 353                         new_csr6 = 0x020E0000;
 354                 } else if (tulip_media_cap[dev->if_port] & MediaIsFx) {
 355                         new_csr6 = 0x02860000;
 356                 } else
 357                         new_csr6 = 0x03860000;
 358                 if (tulip_debug > 1)
 359                         printk(KERN_DEBUG "%s: No media description table, assuming "
 360                                    "%s transceiver, CSR12 %2.2x.\n",
 361                                    dev->name, medianame[dev->if_port],
 362                                    inl(ioaddr + CSR12));
 363         }
 364
 365         tp->csr6 = new_csr6 | (tp->csr6 & 0xfdff) | (tp->full_duplex ? 0x0200 : 0);
 366         return;
 367 }
 368
 369 /*
 370   Check the MII negotiated duplex and change the CSR6 setting if
 371   required.
 372   Return 0 if everything is OK.
 373   Return < 0 if the transceiver is missing or has no link beat.
 374   */
 375 int tulip_check_duplex(struct net_device *dev)
 376 {
 377         struct tulip_private *tp = netdev_priv(dev);
 378         unsigned int bmsr, lpa, negotiated, new_csr6;
 379
 380         bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR);
 381         lpa = tulip_mdio_read(dev, tp->phys[0], MII_LPA);
 382         if (tulip_debug > 1)
 383                 printk(KERN_INFO "%s: MII status %4.4x, Link partner report "
 384                            "%4.4x.\n", dev->name, bmsr, lpa);
 385         if (bmsr == 0xffff)
 386                 return -2;
 387         if ((bmsr & BMSR_LSTATUS) == 0) {
 388                 int new_bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR);
 389                 if ((new_bmsr & BMSR_LSTATUS) == 0) {
 390                         if (tulip_debug  > 1)
 391                                 printk(KERN_INFO "%s: No link beat on the MII interface,"
 392                                            " status %4.4x.\n", dev->name, new_bmsr);
 393                         return -1;
 394                 }
 395         }
 396         negotiated = lpa & tp->advertising[0];
 397         tp->full_duplex = mii_duplex(tp->full_duplex_lock, negotiated);
 398
 399         new_csr6 = tp->csr6;
 400
 401         if (negotiated & LPA_100) new_csr6 &= ~TxThreshold;
 402         else                      new_csr6 |= TxThreshold;
 403         if (tp->full_duplex) new_csr6 |= FullDuplex;
 404         else                 new_csr6 &= ~FullDuplex;
 405
 406         if (new_csr6 != tp->csr6) {
 407                 tp->csr6 = new_csr6;
 408                 tulip_restart_rxtx(tp);
 409
 410                 if (tulip_debug > 0)
 411                         printk(KERN_INFO "%s: Setting %s-duplex based on MII"
 412                                    "#%d link partner capability of %4.4x.\n",
 413                                    dev->name, tp->full_duplex ? "full" : "half",
 414                                    tp->phys[0], lpa);
 415                 return 1;
 416         }
 417
 418         return 0;
 419 }
 420
 421 void __devinit tulip_find_mii (struct net_device *dev, int board_idx)
 422 {
 423         struct tulip_private *tp = netdev_priv(dev);
 424         int phyn, phy_idx = 0;
 425         int mii_reg0;
 426         int mii_advert;
 427         unsigned int to_advert, new_bmcr, ane_switch;
 428
 429         /* Find the connected MII xcvrs.
 430            Doing this in open() would allow detecting external xcvrs later,
 431            but takes much time. */
 432         for (phyn = 1; phyn <= 32 && phy_idx < sizeof (tp->phys); phyn++) {
 433                 int phy = phyn & 0x1f;
 434                 int mii_status = tulip_mdio_read (dev, phy, MII_BMSR);
 435                 if ((mii_status & 0x8301) == 0x8001 ||
 436                     ((mii_status & BMSR_100BASE4) == 0
 437                      && (mii_status & 0x7800) != 0)) {
 438                         /* preserve Becker logic, gain indentation level */
 439                 } else {
 440                         continue;
 441                 }
 442
 443                 mii_reg0 = tulip_mdio_read (dev, phy, MII_BMCR);
 444                 mii_advert = tulip_mdio_read (dev, phy, MII_ADVERTISE);
 445                 ane_switch = 0;
 446
 447                 /* if not advertising at all, gen an
 448                  * advertising value from the capability
 449                  * bits in BMSR
 450                  */
 451                 if ((mii_advert & ADVERTISE_ALL) == 0) {
 452                         unsigned int tmpadv = tulip_mdio_read (dev, phy, MII_BMSR);
 453                         mii_advert = ((tmpadv >> 6) & 0x3e0) | 1;
 454                 }
 455
 456                 if (tp->mii_advertise) {
 457                         tp->advertising[phy_idx] =
 458                         to_advert = tp->mii_advertise;
 459                 } else if (tp->advertising[phy_idx]) {
 460                         to_advert = tp->advertising[phy_idx];
 461                 } else {
 462                         tp->advertising[phy_idx] =
 463                         tp->mii_advertise =
 464                         to_advert = mii_advert;
 465                 }
 466
 467                 tp->phys[phy_idx++] = phy;
 468
 469                 printk (KERN_INFO "tulip%d:  MII transceiver #%d "
 470                         "config %4.4x status %4.4x advertising %4.4x.\n",
 471                         board_idx, phy, mii_reg0, mii_status, mii_advert);
 472
 473                 /* Fixup for DLink with miswired PHY. */
 474                 if (mii_advert != to_advert) {
 475                         printk (KERN_DEBUG "tulip%d:  Advertising %4.4x on PHY %d,"
 476                                 " previously advertising %4.4x.\n",
 477                                 board_idx, to_advert, phy, mii_advert);
 478                         tulip_mdio_write (dev, phy, 4, to_advert);
 479                 }
 480
 481                 /* Enable autonegotiation: some boards default to off. */
 482                 if (tp->default_port == 0) {
 483                         new_bmcr = mii_reg0 | BMCR_ANENABLE;
 484                         if (new_bmcr != mii_reg0) {
 485                                 new_bmcr |= BMCR_ANRESTART;
 486                                 ane_switch = 1;
 487                         }
 488                 }
 489                 /* ...or disable nway, if forcing media */
 490                 else {
 491                         new_bmcr = mii_reg0 & ~BMCR_ANENABLE;
 492                         if (new_bmcr != mii_reg0)
 493                                 ane_switch = 1;
 494                 }
 495
 496                 /* clear out bits we never want at this point */
 497                 new_bmcr &= ~(BMCR_CTST | BMCR_FULLDPLX | BMCR_ISOLATE |
 498                               BMCR_PDOWN | BMCR_SPEED100 | BMCR_LOOPBACK |
 499                               BMCR_RESET);
 500
 501                 if (tp->full_duplex)
 502                         new_bmcr |= BMCR_FULLDPLX;
 503                 if (tulip_media_cap[tp->default_port] & MediaIs100)
 504                         new_bmcr |= BMCR_SPEED100;
 505
 506                 if (new_bmcr != mii_reg0) {
 507                         /* some phys need the ANE switch to
 508                          * happen before forced media settings
 509                          * will "take."  However, we write the
 510                          * same value twice in order not to
 511                          * confuse the sane phys.
 512                          */
 513                         if (ane_switch) {
 514                                 tulip_mdio_write (dev, phy, MII_BMCR, new_bmcr);
 515                                 udelay (10);
 516                         }
 517                         tulip_mdio_write (dev, phy, MII_BMCR, new_bmcr);
 518                 }
 519         }
 520         tp->mii_cnt = phy_idx;
 521         if (tp->mtable && tp->mtable->has_mii && phy_idx == 0) {
 522                 printk (KERN_INFO "tulip%d: ***WARNING***: No MII transceiver found!\n",
 523                         board_idx);
 524                 tp->phys[0] = 1;
 525         }
 526 }