drivers/s390/scsi/zfcp_fsf.c

   1 /*
   2  *
   3  * linux/drivers/s390/scsi/zfcp_fsf.c
   4  *
   5  * FCP adapter driver for IBM eServer zSeries
   6  *
   7  * (C) Copyright IBM Corp. 2002, 2004
   8  *
   9  * Author(s): Martin Peschke <mpeschke@de.ibm.com>
  10  *            Raimund Schroeder <raimund.schroeder@de.ibm.com>
  11  *            Aron Zeh
  12  *            Wolfgang Taphorn
  13  *            Stefan Bader <stefan.bader@de.ibm.com>
  14  *            Heiko Carstens <heiko.carstens@de.ibm.com>
  15  *            Andreas Herrmann <aherrman@de.ibm.com>
  16  *            Volker Sameske <sameske@de.ibm.com>
  17  *
  18  * This program is free software; you can redistribute it and/or modify
  19  * it under the terms of the GNU General Public License as published by
  20  * the Free Software Foundation; either version 2, or (at your option)
  21  * any later version.
  22  *
  23  * This program is distributed in the hope that it will be useful,
  24  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  25  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  26  * GNU General Public License for more details.
  27  *
  28  * You should have received a copy of the GNU General Public License
  29  * along with this program; if not, write to the Free Software
  30  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  31  */
  32
  33 #define ZFCP_FSF_C_REVISION "$Revision: 1.92 $"
  34
  35 #include "zfcp_ext.h"
  36
  37 static int zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *);
  38 static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *);
  39 static int zfcp_fsf_open_port_handler(struct zfcp_fsf_req *);
  40 static int zfcp_fsf_close_port_handler(struct zfcp_fsf_req *);
  41 static int zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *);
  42 static int zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *);
  43 static int zfcp_fsf_close_unit_handler(struct zfcp_fsf_req *);
  44 static int zfcp_fsf_send_fcp_command_handler(struct zfcp_fsf_req *);
  45 static int zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *);
  46 static int zfcp_fsf_send_fcp_command_task_management_handler(
  47         struct zfcp_fsf_req *);
  48 static int zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *);
  49 static int zfcp_fsf_status_read_handler(struct zfcp_fsf_req *);
  50 static int zfcp_fsf_send_ct_handler(struct zfcp_fsf_req *);
  51 static int zfcp_fsf_send_els_handler(struct zfcp_fsf_req *);
  52 static int zfcp_fsf_control_file_handler(struct zfcp_fsf_req *);
  53 static inline int zfcp_fsf_req_sbal_check(
  54         unsigned long *, struct zfcp_qdio_queue *, int);
  55 static inline int zfcp_use_one_sbal(
  56         struct scatterlist *, int, struct scatterlist *, int);
  57 static struct zfcp_fsf_req *zfcp_fsf_req_alloc(mempool_t *, int);
  58 static int zfcp_fsf_req_send(struct zfcp_fsf_req *, struct timer_list *);
  59 static int zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *);
  60 static int zfcp_fsf_fsfstatus_eval(struct zfcp_fsf_req *);
  61 static int zfcp_fsf_fsfstatus_qual_eval(struct zfcp_fsf_req *);
  62 static int zfcp_fsf_req_dispatch(struct zfcp_fsf_req *);
  63 static void zfcp_fsf_req_dismiss(struct zfcp_fsf_req *);
  64 static void zfcp_fsf_req_free(struct zfcp_fsf_req *);
  65
  66 /* association between FSF command and FSF QTCB type */
  67 static u32 fsf_qtcb_type[] = {
  68         [FSF_QTCB_FCP_CMND] =             FSF_IO_COMMAND,
  69         [FSF_QTCB_ABORT_FCP_CMND] =       FSF_SUPPORT_COMMAND,
  70         [FSF_QTCB_OPEN_PORT_WITH_DID] =   FSF_SUPPORT_COMMAND,
  71         [FSF_QTCB_OPEN_LUN] =             FSF_SUPPORT_COMMAND,
  72         [FSF_QTCB_CLOSE_LUN] =            FSF_SUPPORT_COMMAND,
  73         [FSF_QTCB_CLOSE_PORT] =           FSF_SUPPORT_COMMAND,
  74         [FSF_QTCB_CLOSE_PHYSICAL_PORT] =  FSF_SUPPORT_COMMAND,
  75         [FSF_QTCB_SEND_ELS] =             FSF_SUPPORT_COMMAND,
  76         [FSF_QTCB_SEND_GENERIC] =         FSF_SUPPORT_COMMAND,
  77         [FSF_QTCB_EXCHANGE_CONFIG_DATA] = FSF_CONFIG_COMMAND,
  78         [FSF_QTCB_EXCHANGE_PORT_DATA] =   FSF_PORT_COMMAND,
  79         [FSF_QTCB_DOWNLOAD_CONTROL_FILE] = FSF_SUPPORT_COMMAND,
  80         [FSF_QTCB_UPLOAD_CONTROL_FILE] =  FSF_SUPPORT_COMMAND
  81 };
  82
  83 static const char zfcp_act_subtable_type[5][8] = {
  84         "unknown", "OS", "WWPN", "DID", "LUN"
  85 };
  86
  87 /****************************************************************/
  88 /*************** FSF related Functions  *************************/
  89 /****************************************************************/
  90
  91 #define ZFCP_LOG_AREA                   ZFCP_LOG_AREA_FSF
  92
  93 /*
  94  * function:    zfcp_fsf_req_alloc
  95  *
  96  * purpose:     Obtains an fsf_req and potentially a qtcb (for all but
  97  *              unsolicited requests) via helper functions
  98  *              Does some initial fsf request set-up.
  99  *
 100  * returns:     pointer to allocated fsf_req if successfull
 101  *              NULL otherwise
 102  *
 103  * locks:       none
 104  *
 105  */
 106 static struct zfcp_fsf_req *
 107 zfcp_fsf_req_alloc(mempool_t *pool, int req_flags)
 108 {
 109         size_t size;
 110         void *ptr;
 111         struct zfcp_fsf_req *fsf_req = NULL;
 112
 113         if (req_flags & ZFCP_REQ_NO_QTCB)
 114                 size = sizeof(struct zfcp_fsf_req);
 115         else
 116                 size = sizeof(struct zfcp_fsf_req_pool_element);
 117
 118         if (likely(pool != NULL))
 119                 ptr = mempool_alloc(pool, GFP_ATOMIC);
 120         else
 121                 ptr = kmalloc(size, GFP_ATOMIC);
 122
 123         if (unlikely(NULL == ptr))
 124                 goto out;
 125
 126         memset(ptr, 0, size);
 127
 128         if (req_flags & ZFCP_REQ_NO_QTCB) {
 129                 fsf_req = (struct zfcp_fsf_req *) ptr;
 130         } else {
 131                 fsf_req = &((struct zfcp_fsf_req_pool_element *) ptr)->fsf_req;
 132                 fsf_req->qtcb =
 133                         &((struct zfcp_fsf_req_pool_element *) ptr)->qtcb;
 134         }
 135
 136         fsf_req->pool = pool;
 137
 138  out:
 139         return fsf_req;
 140 }
 141
 142 /*
 143  * function:    zfcp_fsf_req_free
 144  *
 145  * purpose:     Frees the memory of an fsf_req (and potentially a qtcb) or
 146  *              returns it into the pool via helper functions.
 147  *
 148  * returns:     sod all
 149  *
 150  * locks:       none
 151  */
 152 static void
 153 zfcp_fsf_req_free(struct zfcp_fsf_req *fsf_req)
 154 {
 155         if (likely(fsf_req->pool != NULL))
 156                 mempool_free(fsf_req, fsf_req->pool);
 157                 else
 158                         kfree(fsf_req);
 159 }
 160
 161 /*
 162  * function:
 163  *
 164  * purpose:
 165  *
 166  * returns:
 167  *
 168  * note: qdio queues shall be down (no ongoing inbound processing)
 169  */
 170 int
 171 zfcp_fsf_req_dismiss_all(struct zfcp_adapter *adapter)
 172 {
 173         int retval = 0;
 174         struct zfcp_fsf_req *fsf_req, *tmp;
 175
 176         list_for_each_entry_safe(fsf_req, tmp, &adapter->fsf_req_list_head,
 177                                  list)
 178             zfcp_fsf_req_dismiss(fsf_req);
 179         /* wait_event_timeout? */
 180         while (!list_empty(&adapter->fsf_req_list_head)) {
 181                 ZFCP_LOG_DEBUG("fsf req list of adapter %s not yet empty\n",
 182                                zfcp_get_busid_by_adapter(adapter));
 183                 /* wait for woken intiators to clean up their requests */
 184                 msleep(jiffies_to_msecs(ZFCP_FSFREQ_CLEANUP_TIMEOUT));
 185         }
 186
 187         /* consistency check */
 188         if (atomic_read(&adapter->fsf_reqs_active)) {
 189                 ZFCP_LOG_NORMAL("bug: There are still %d FSF requests pending "
 190                                 "on adapter %s after cleanup.\n",
 191                                 atomic_read(&adapter->fsf_reqs_active),
 192                                 zfcp_get_busid_by_adapter(adapter));
 193                 atomic_set(&adapter->fsf_reqs_active, 0);
 194         }
 195
 196         return retval;
 197 }
 198
 199 /*
 200  * function:
 201  *
 202  * purpose:
 203  *
 204  * returns:
 205  */
 206 static void
 207 zfcp_fsf_req_dismiss(struct zfcp_fsf_req *fsf_req)
 208 {
 209         fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED;
 210         zfcp_fsf_req_complete(fsf_req);
 211 }
 212
 213 /*
 214  * function:    zfcp_fsf_req_complete
 215  *
 216  * purpose:     Updates active counts and timers for openfcp-reqs
 217  *              May cleanup request after req_eval returns
 218  *
 219  * returns:     0 - success
 220  *              !0 - failure
 221  *
 222  * context:
 223  */
 224 int
 225 zfcp_fsf_req_complete(struct zfcp_fsf_req *fsf_req)
 226 {
 227         int retval = 0;
 228         int cleanup;
 229         struct zfcp_adapter *adapter = fsf_req->adapter;
 230
 231         /* do some statistics */
 232         atomic_dec(&adapter->fsf_reqs_active);
 233
 234         if (unlikely(fsf_req->fsf_command == FSF_QTCB_UNSOLICITED_STATUS)) {
 235                 ZFCP_LOG_DEBUG("Status read response received\n");
 236                 /*
 237                  * Note: all cleanup handling is done in the callchain of
 238                  * the function call-chain below.
 239                  */
 240                 zfcp_fsf_status_read_handler(fsf_req);
 241                 goto out;
 242         } else
 243                 zfcp_fsf_protstatus_eval(fsf_req);
 244
 245         /*
 246          * fsf_req may be deleted due to waking up functions, so
 247          * cleanup is saved here and used later
 248          */
 249         if (likely(fsf_req->status & ZFCP_STATUS_FSFREQ_CLEANUP))
 250                 cleanup = 1;
 251         else
 252                 cleanup = 0;
 253
 254         fsf_req->status |= ZFCP_STATUS_FSFREQ_COMPLETED;
 255
 256         /* cleanup request if requested by initiator */
 257         if (likely(cleanup)) {
 258                 ZFCP_LOG_TRACE("removing FSF request %p\n", fsf_req);
 259                 /*
 260                  * lock must not be held here since it will be
 261                  * grabed by the called routine, too
 262                  */
 263                 zfcp_fsf_req_cleanup(fsf_req);
 264         } else {
 265                 /* notify initiator waiting for the requests completion */
 266                 ZFCP_LOG_TRACE("waking initiator of FSF request %p\n",fsf_req);
 267                 /*
 268                  * FIXME: Race! We must not access fsf_req here as it might have been
 269                  * cleaned up already due to the set ZFCP_STATUS_FSFREQ_COMPLETED
 270                  * flag. It's an improbable case. But, we have the same paranoia for
 271                  * the cleanup flag already.
 272                  * Might better be handled using complete()?
 273                  * (setting the flag and doing wakeup ought to be atomic
 274                  *  with regard to checking the flag as long as waitqueue is
 275                  *  part of the to be released structure)
 276                  */
 277                 wake_up(&fsf_req->completion_wq);
 278         }
 279
 280  out:
 281         return retval;
 282 }
 283
 284 /*
 285  * function:    zfcp_fsf_protstatus_eval
 286  *
 287  * purpose:     evaluates the QTCB of the finished FSF request
 288  *              and initiates appropriate actions
 289  *              (usually calling FSF command specific handlers)
 290  *
 291  * returns:
 292  *
 293  * context:
 294  *
 295  * locks:
 296  */
 297 static int
 298 zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *fsf_req)
 299 {
 300         int retval = 0;
 301         struct zfcp_adapter *adapter = fsf_req->adapter;
 302
 303         ZFCP_LOG_DEBUG("QTCB is at %p\n", fsf_req->qtcb);
 304
 305         if (fsf_req->status & ZFCP_STATUS_FSFREQ_DISMISSED) {
 306                 ZFCP_LOG_DEBUG("fsf_req 0x%lx has been dismissed\n",
 307                                (unsigned long) fsf_req);
 308                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR |
 309                         ZFCP_STATUS_FSFREQ_RETRY; /* only for SCSI cmnds. */
 310                 zfcp_cmd_dbf_event_fsf("dismiss", fsf_req, NULL, 0);
 311                 goto skip_protstatus;
 312         }
 313
 314         /* log additional information provided by FSF (if any) */
 315         if (unlikely(fsf_req->qtcb->header.log_length)) {
 316                 /* do not trust them ;-) */
 317                 if (fsf_req->qtcb->header.log_start > sizeof(struct fsf_qtcb)) {
 318                         ZFCP_LOG_NORMAL
 319                             ("bug: ULP (FSF logging) log data starts "
 320                              "beyond end of packet header. Ignored. "
 321                              "(start=%i, size=%li)\n",
 322                              fsf_req->qtcb->header.log_start,
 323                              sizeof(struct fsf_qtcb));
 324                         goto forget_log;
 325                 }
 326                 if ((size_t) (fsf_req->qtcb->header.log_start +
 327                      fsf_req->qtcb->header.log_length)
 328                     > sizeof(struct fsf_qtcb)) {
 329                         ZFCP_LOG_NORMAL("bug: ULP (FSF logging) log data ends "
 330                                         "beyond end of packet header. Ignored. "
 331                                         "(start=%i, length=%i, size=%li)\n",
 332                                         fsf_req->qtcb->header.log_start,
 333                                         fsf_req->qtcb->header.log_length,
 334                                         sizeof(struct fsf_qtcb));
 335                         goto forget_log;
 336                 }
 337                 ZFCP_LOG_TRACE("ULP log data: \n");
 338                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE,
 339                               (char *) fsf_req->qtcb +
 340                               fsf_req->qtcb->header.log_start,
 341                               fsf_req->qtcb->header.log_length);
 342         }
 343  forget_log:
 344
 345         /* evaluate FSF Protocol Status */
 346         switch (fsf_req->qtcb->prefix.prot_status) {
 347
 348         case FSF_PROT_GOOD:
 349                 ZFCP_LOG_TRACE("FSF_PROT_GOOD\n");
 350                 break;
 351
 352         case FSF_PROT_FSF_STATUS_PRESENTED:
 353                 ZFCP_LOG_TRACE("FSF_PROT_FSF_STATUS_PRESENTED\n");
 354                 break;
 355
 356         case FSF_PROT_QTCB_VERSION_ERROR:
 357                 ZFCP_LOG_FLAGS(0, "FSF_PROT_QTCB_VERSION_ERROR\n");
 358                 ZFCP_LOG_NORMAL("error: The adapter %s contains "
 359                                 "microcode of version 0x%x, the device driver "
 360                                 "only supports 0x%x. Aborting.\n",
 361                                 zfcp_get_busid_by_adapter(adapter),
 362                                 fsf_req->qtcb->prefix.prot_status_qual.
 363                                 version_error.fsf_version, ZFCP_QTCB_VERSION);
 364                 /* stop operation for this adapter */
 365                 debug_text_exception(adapter->erp_dbf, 0, "prot_ver_err");
 366                 zfcp_erp_adapter_shutdown(adapter, 0);
 367                 zfcp_cmd_dbf_event_fsf("qverserr", fsf_req,
 368                                        &fsf_req->qtcb->prefix.prot_status_qual,
 369                                        sizeof (union fsf_prot_status_qual));
 370                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 371                 break;
 372
 373         case FSF_PROT_SEQ_NUMB_ERROR:
 374                 ZFCP_LOG_FLAGS(0, "FSF_PROT_SEQ_NUMB_ERROR\n");
 375                 ZFCP_LOG_NORMAL("bug: Sequence number mismatch between "
 376                                 "driver (0x%x) and adapter %s (0x%x). "
 377                                 "Restarting all operations on this adapter.\n",
 378                                 fsf_req->qtcb->prefix.req_seq_no,
 379                                 zfcp_get_busid_by_adapter(adapter),
 380                                 fsf_req->qtcb->prefix.prot_status_qual.
 381                                 sequence_error.exp_req_seq_no);
 382                 debug_text_exception(adapter->erp_dbf, 0, "prot_seq_err");
 383                 /* restart operation on this adapter */
 384                 zfcp_erp_adapter_reopen(adapter, 0);
 385                 zfcp_cmd_dbf_event_fsf("seqnoerr", fsf_req,
 386                                        &fsf_req->qtcb->prefix.prot_status_qual,
 387                                        sizeof (union fsf_prot_status_qual));
 388                 fsf_req->status |= ZFCP_STATUS_FSFREQ_RETRY;
 389                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 390                 break;
 391
 392         case FSF_PROT_UNSUPP_QTCB_TYPE:
 393                 ZFCP_LOG_FLAGS(0, "FSF_PROT_UNSUP_QTCB_TYPE\n");
 394                 ZFCP_LOG_NORMAL("error: Packet header type used by the "
 395                                 "device driver is incompatible with "
 396                                 "that used on adapter %s. "
 397                                 "Stopping all operations on this adapter.\n",
 398                                 zfcp_get_busid_by_adapter(adapter));
 399                 debug_text_exception(adapter->erp_dbf, 0, "prot_unsup_qtcb");
 400                 zfcp_erp_adapter_shutdown(adapter, 0);
 401                 zfcp_cmd_dbf_event_fsf("unsqtcbt", fsf_req,
 402                                        &fsf_req->qtcb->prefix.prot_status_qual,
 403                                        sizeof (union fsf_prot_status_qual));
 404                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 405                 break;
 406
 407         case FSF_PROT_HOST_CONNECTION_INITIALIZING:
 408                 ZFCP_LOG_FLAGS(1, "FSF_PROT_HOST_CONNECTION_INITIALIZING\n");
 409                 zfcp_cmd_dbf_event_fsf("hconinit", fsf_req,
 410                                        &fsf_req->qtcb->prefix.prot_status_qual,
 411                                        sizeof (union fsf_prot_status_qual));
 412                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 413                 atomic_set_mask(ZFCP_STATUS_ADAPTER_HOST_CON_INIT,
 414                                 &(adapter->status));
 415                 debug_text_event(adapter->erp_dbf, 3, "prot_con_init");
 416                 break;
 417
 418         case FSF_PROT_DUPLICATE_REQUEST_ID:
 419                 ZFCP_LOG_FLAGS(0, "FSF_PROT_DUPLICATE_REQUEST_IDS\n");
 420                 if (fsf_req->qtcb) {
 421                         ZFCP_LOG_NORMAL("bug: The request identifier 0x%Lx "
 422                                         "to the adapter %s is ambiguous. "
 423                                         "Stopping all operations on this "
 424                                         "adapter.\n",
 425                                         *(unsigned long long *)
 426                                         (&fsf_req->qtcb->bottom.support.
 427                                          req_handle),
 428                                         zfcp_get_busid_by_adapter(adapter));
 429                 } else {
 430                         ZFCP_LOG_NORMAL("bug: The request identifier %p "
 431                                         "to the adapter %s is ambiguous. "
 432                                         "Stopping all operations on this "
 433                                         "adapter. "
 434                                         "(bug: got this for an unsolicited "
 435                                         "status read request)\n",
 436                                         fsf_req,
 437                                         zfcp_get_busid_by_adapter(adapter));
 438                 }
 439                 debug_text_exception(adapter->erp_dbf, 0, "prot_dup_id");
 440                 zfcp_erp_adapter_shutdown(adapter, 0);
 441                 zfcp_cmd_dbf_event_fsf("dupreqid", fsf_req,
 442                                        &fsf_req->qtcb->prefix.prot_status_qual,
 443                                        sizeof (union fsf_prot_status_qual));
 444                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 445                 break;
 446
 447         case FSF_PROT_LINK_DOWN:
 448                 ZFCP_LOG_FLAGS(1, "FSF_PROT_LINK_DOWN\n");
 449                 /*
 450                  * 'test and set' is not atomic here -
 451                  * it's ok as long as calls to our response queue handler
 452                  * (and thus execution of this code here) are serialized
 453                  * by the qdio module
 454                  */
 455                 if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED,
 456                                       &adapter->status)) {
 457                         switch (fsf_req->qtcb->prefix.prot_status_qual.
 458                                 locallink_error.code) {
 459                         case FSF_PSQ_LINK_NOLIGHT:
 460                                 ZFCP_LOG_INFO("The local link to adapter %s "
 461                                               "is down (no light detected).\n",
 462                                               zfcp_get_busid_by_adapter(
 463                                                       adapter));
 464                                 break;
 465                         case FSF_PSQ_LINK_WRAPPLUG:
 466                                 ZFCP_LOG_INFO("The local link to adapter %s "
 467                                               "is down (wrap plug detected).\n",
 468                                               zfcp_get_busid_by_adapter(
 469                                                       adapter));
 470                                 break;
 471                         case FSF_PSQ_LINK_NOFCP:
 472                                 ZFCP_LOG_INFO("The local link to adapter %s "
 473                                               "is down (adjacent node on "
 474                                               "link does not support FCP).\n",
 475                                               zfcp_get_busid_by_adapter(
 476                                                       adapter));
 477                                 break;
 478                         default:
 479                                 ZFCP_LOG_INFO("The local link to adapter %s "
 480                                               "is down "
 481                                               "(warning: unknown reason "
 482                                               "code).\n",
 483                                               zfcp_get_busid_by_adapter(
 484                                                       adapter));
 485                                 break;
 486
 487                         }
 488                         /*
 489                          * Due to the 'erp failed' flag the adapter won't
 490                          * be recovered but will be just set to 'blocked'
 491                          * state. All subordinary devices will have state
 492                          * 'blocked' and 'erp failed', too.
 493                          * Thus the adapter is still able to provide
 494                          * 'link up' status without being flooded with
 495                          * requests.
 496                          * (note: even 'close port' is not permitted)
 497                          */
 498                         ZFCP_LOG_INFO("Stopping all operations for adapter "
 499                                       "%s.\n",
 500                                       zfcp_get_busid_by_adapter(adapter));
 501                         atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED |
 502                                         ZFCP_STATUS_COMMON_ERP_FAILED,
 503                                         &adapter->status);
 504                         zfcp_erp_adapter_reopen(adapter, 0);
 505                         debug_text_event(adapter->erp_dbf, 1, "prot_link_down");
 506                 }
 507                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 508                 break;
 509
 510         case FSF_PROT_REEST_QUEUE:
 511                 ZFCP_LOG_FLAGS(1, "FSF_PROT_REEST_QUEUE\n");
 512                 debug_text_event(adapter->erp_dbf, 1, "prot_reest_queue");
 513                 ZFCP_LOG_INFO("The local link to adapter with "
 514                               "%s was re-plugged. "
 515                               "Re-starting operations on this adapter.\n",
 516                               zfcp_get_busid_by_adapter(adapter));
 517                 /* All ports should be marked as ready to run again */
 518                 zfcp_erp_modify_adapter_status(adapter,
 519                                                ZFCP_STATUS_COMMON_RUNNING,
 520                                                ZFCP_SET);
 521                 zfcp_erp_adapter_reopen(adapter,
 522                                         ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED
 523                                         | ZFCP_STATUS_COMMON_ERP_FAILED);
 524                 zfcp_cmd_dbf_event_fsf("reestque", fsf_req,
 525                                        &fsf_req->qtcb->prefix.prot_status_qual,
 526                                        sizeof (union fsf_prot_status_qual));
 527                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 528                 break;
 529
 530         case FSF_PROT_ERROR_STATE:
 531                 ZFCP_LOG_FLAGS(0, "FSF_PROT_ERROR_STATE\n");
 532                 ZFCP_LOG_NORMAL("error: The adapter %s "
 533                                 "has entered the error state. "
 534                                 "Restarting all operations on this "
 535                                 "adapter.\n",
 536                                 zfcp_get_busid_by_adapter(adapter));
 537                 debug_text_event(adapter->erp_dbf, 0, "prot_err_sta");
 538                 /* restart operation on this adapter */
 539                 zfcp_erp_adapter_reopen(adapter, 0);
 540                 zfcp_cmd_dbf_event_fsf("proterrs", fsf_req,
 541                                        &fsf_req->qtcb->prefix.prot_status_qual,
 542                                        sizeof (union fsf_prot_status_qual));
 543                 fsf_req->status |= ZFCP_STATUS_FSFREQ_RETRY;
 544                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 545                 break;
 546
 547         default:
 548                 ZFCP_LOG_NORMAL("bug: Transfer protocol status information "
 549                                 "provided by the adapter %s "
 550                                 "is not compatible with the device driver. "
 551                                 "Stopping all operations on this adapter. "
 552                                 "(debug info 0x%x).\n",
 553                                 zfcp_get_busid_by_adapter(adapter),
 554                                 fsf_req->qtcb->prefix.prot_status);
 555                 debug_text_event(adapter->erp_dbf, 0, "prot_inval:");
 556                 debug_exception(adapter->erp_dbf, 0,
 557                                 &fsf_req->qtcb->prefix.prot_status,
 558                                 sizeof (u32));
 559                 zfcp_erp_adapter_shutdown(adapter, 0);
 560                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 561         }
 562
 563  skip_protstatus:
 564         /*
 565          * always call specific handlers to give them a chance to do
 566          * something meaningful even in error cases
 567          */
 568         zfcp_fsf_fsfstatus_eval(fsf_req);
 569         return retval;
 570 }
 571
 572 /*
 573  * function:    zfcp_fsf_fsfstatus_eval
 574  *
 575  * purpose:     evaluates FSF status of completed FSF request
 576  *              and acts accordingly
 577  *
 578  * returns:
 579  */
 580 static int
 581 zfcp_fsf_fsfstatus_eval(struct zfcp_fsf_req *fsf_req)
 582 {
 583         int retval = 0;
 584
 585         if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)) {
 586                 goto skip_fsfstatus;
 587         }
 588
 589         /* evaluate FSF Status */
 590         switch (fsf_req->qtcb->header.fsf_status) {
 591         case FSF_UNKNOWN_COMMAND:
 592                 ZFCP_LOG_FLAGS(0, "FSF_UNKNOWN_COMMAND\n");
 593                 ZFCP_LOG_NORMAL("bug: Command issued by the device driver is "
 594                                 "not known by the adapter %s "
 595                                 "Stopping all operations on this adapter. "
 596                                 "(debug info 0x%x).\n",
 597                                 zfcp_get_busid_by_adapter(fsf_req->adapter),
 598                                 fsf_req->qtcb->header.fsf_command);
 599                 debug_text_exception(fsf_req->adapter->erp_dbf, 0,
 600                                      "fsf_s_unknown");
 601                 zfcp_erp_adapter_shutdown(fsf_req->adapter, 0);
 602                 zfcp_cmd_dbf_event_fsf("unknownc", fsf_req,
 603                                        &fsf_req->qtcb->header.fsf_status_qual,
 604                                        sizeof (union fsf_status_qual));
 605                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 606                 break;
 607
 608         case FSF_FCP_RSP_AVAILABLE:
 609                 ZFCP_LOG_FLAGS(2, "FSF_FCP_RSP_AVAILABLE\n");
 610                 ZFCP_LOG_DEBUG("FCP Sense data will be presented to the "
 611                                "SCSI stack.\n");
 612                 debug_text_event(fsf_req->adapter->erp_dbf, 3, "fsf_s_rsp");
 613                 break;
 614
 615         case FSF_ADAPTER_STATUS_AVAILABLE:
 616                 ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n");
 617                 debug_text_event(fsf_req->adapter->erp_dbf, 2, "fsf_s_astatus");
 618                 zfcp_fsf_fsfstatus_qual_eval(fsf_req);
 619                 break;
 620
 621         default:
 622                 break;
 623         }
 624
 625  skip_fsfstatus:
 626         /*
 627          * always call specific handlers to give them a chance to do
 628          * something meaningful even in error cases
 629          */
 630         zfcp_fsf_req_dispatch(fsf_req);
 631
 632         return retval;
 633 }
 634
 635 /*
 636  * function:    zfcp_fsf_fsfstatus_qual_eval
 637  *
 638  * purpose:     evaluates FSF status-qualifier of completed FSF request
 639  *              and acts accordingly
 640  *
 641  * returns:
 642  */
 643 static int
 644 zfcp_fsf_fsfstatus_qual_eval(struct zfcp_fsf_req *fsf_req)
 645 {
 646         int retval = 0;
 647
 648         switch (fsf_req->qtcb->header.fsf_status_qual.word[0]) {
 649         case FSF_SQ_FCP_RSP_AVAILABLE:
 650                 ZFCP_LOG_FLAGS(2, "FSF_SQ_FCP_RSP_AVAILABLE\n");
 651                 debug_text_event(fsf_req->adapter->erp_dbf, 4, "fsf_sq_rsp");
 652                 break;
 653         case FSF_SQ_RETRY_IF_POSSIBLE:
 654                 ZFCP_LOG_FLAGS(2, "FSF_SQ_RETRY_IF_POSSIBLE\n");
 655                 /* The SCSI-stack may now issue retries or escalate */
 656                 debug_text_event(fsf_req->adapter->erp_dbf, 2, "fsf_sq_retry");
 657                 zfcp_cmd_dbf_event_fsf("sqretry", fsf_req,
 658                                        &fsf_req->qtcb->header.fsf_status_qual,
 659                                        sizeof (union fsf_status_qual));
 660                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 661                 break;
 662         case FSF_SQ_COMMAND_ABORTED:
 663                 ZFCP_LOG_FLAGS(2, "FSF_SQ_COMMAND_ABORTED\n");
 664                 /* Carry the aborted state on to upper layer */
 665                 debug_text_event(fsf_req->adapter->erp_dbf, 2, "fsf_sq_abort");
 666                 zfcp_cmd_dbf_event_fsf("sqabort", fsf_req,
 667                                        &fsf_req->qtcb->header.fsf_status_qual,
 668                                        sizeof (union fsf_status_qual));
 669                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ABORTED;
 670                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 671                 break;
 672         case FSF_SQ_NO_RECOM:
 673                 ZFCP_LOG_FLAGS(0, "FSF_SQ_NO_RECOM\n");
 674                 debug_text_exception(fsf_req->adapter->erp_dbf, 0,
 675                                      "fsf_sq_no_rec");
 676                 ZFCP_LOG_NORMAL("bug: No recommendation could be given for a"
 677                                 "problem on the adapter %s "
 678                                 "Stopping all operations on this adapter. ",
 679                                 zfcp_get_busid_by_adapter(fsf_req->adapter));
 680                 zfcp_erp_adapter_shutdown(fsf_req->adapter, 0);
 681                 zfcp_cmd_dbf_event_fsf("sqnrecom", fsf_req,
 682                                        &fsf_req->qtcb->header.fsf_status_qual,
 683                                        sizeof (union fsf_status_qual));
 684                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 685                 break;
 686         case FSF_SQ_ULP_PROGRAMMING_ERROR:
 687                 ZFCP_LOG_FLAGS(0, "FSF_SQ_ULP_PROGRAMMING_ERROR\n");
 688                 ZFCP_LOG_NORMAL("error: not enough SBALs for data transfer "
 689                                 "(adapter %s)\n",
 690                                 zfcp_get_busid_by_adapter(fsf_req->adapter));
 691                 debug_text_exception(fsf_req->adapter->erp_dbf, 0,
 692                                      "fsf_sq_ulp_err");
 693                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 694                 break;
 695         case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
 696         case FSF_SQ_NO_RETRY_POSSIBLE:
 697         case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
 698                 /* dealt with in the respective functions */
 699                 break;
 700         default:
 701                 ZFCP_LOG_NORMAL("bug: Additional status info could "
 702                                 "not be interpreted properly.\n");
 703                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL,
 704                               (char *) &fsf_req->qtcb->header.fsf_status_qual,
 705                               sizeof (union fsf_status_qual));
 706                 debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_sq_inval:");
 707                 debug_exception(fsf_req->adapter->erp_dbf, 0,
 708                                 &fsf_req->qtcb->header.fsf_status_qual.word[0],
 709                                 sizeof (u32));
 710                 zfcp_cmd_dbf_event_fsf("squndef", fsf_req,
 711                                        &fsf_req->qtcb->header.fsf_status_qual,
 712                                        sizeof (union fsf_status_qual));
 713                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 714                 break;
 715         }
 716
 717         return retval;
 718 }
 719
 720 /*
 721  * function:    zfcp_fsf_req_dispatch
 722  *
 723  * purpose:     calls the appropriate command specific handler
 724  *
 725  * returns:
 726  */
 727 static int
 728 zfcp_fsf_req_dispatch(struct zfcp_fsf_req *fsf_req)
 729 {
 730         struct zfcp_erp_action *erp_action = fsf_req->erp_action;
 731         struct zfcp_adapter *adapter = fsf_req->adapter;
 732         int retval = 0;
 733
 734         if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)) {
 735                 ZFCP_LOG_TRACE("fsf_req=%p, QTCB=%p\n", fsf_req, fsf_req->qtcb);
 736                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE,
 737                               (char *) fsf_req->qtcb, sizeof(struct fsf_qtcb));
 738         }
 739
 740         switch (fsf_req->fsf_command) {
 741
 742         case FSF_QTCB_FCP_CMND:
 743                 ZFCP_LOG_FLAGS(3, "FSF_QTCB_FCP_CMND\n");
 744                 zfcp_fsf_send_fcp_command_handler(fsf_req);
 745                 break;
 746
 747         case FSF_QTCB_ABORT_FCP_CMND:
 748                 ZFCP_LOG_FLAGS(2, "FSF_QTCB_ABORT_FCP_CMND\n");
 749                 zfcp_fsf_abort_fcp_command_handler(fsf_req);
 750                 break;
 751
 752         case FSF_QTCB_SEND_GENERIC:
 753                 ZFCP_LOG_FLAGS(2, "FSF_QTCB_SEND_GENERIC\n");
 754                 zfcp_fsf_send_ct_handler(fsf_req);
 755                 break;
 756
 757         case FSF_QTCB_OPEN_PORT_WITH_DID:
 758                 ZFCP_LOG_FLAGS(2, "FSF_QTCB_OPEN_PORT_WITH_DID\n");
 759                 zfcp_fsf_open_port_handler(fsf_req);
 760                 break;
 761
 762         case FSF_QTCB_OPEN_LUN:
 763                 ZFCP_LOG_FLAGS(2, "FSF_QTCB_OPEN_LUN\n");
 764                 zfcp_fsf_open_unit_handler(fsf_req);
 765                 break;
 766
 767         case FSF_QTCB_CLOSE_LUN:
 768                 ZFCP_LOG_FLAGS(2, "FSF_QTCB_CLOSE_LUN\n");
 769                 zfcp_fsf_close_unit_handler(fsf_req);
 770                 break;
 771
 772         case FSF_QTCB_CLOSE_PORT:
 773                 ZFCP_LOG_FLAGS(2, "FSF_QTCB_CLOSE_PORT\n");
 774                 zfcp_fsf_close_port_handler(fsf_req);
 775                 break;
 776
 777         case FSF_QTCB_CLOSE_PHYSICAL_PORT:
 778                 ZFCP_LOG_FLAGS(2, "FSF_QTCB_CLOSE_PHYSICAL_PORT\n");
 779                 zfcp_fsf_close_physical_port_handler(fsf_req);
 780                 break;
 781
 782         case FSF_QTCB_EXCHANGE_CONFIG_DATA:
 783                 ZFCP_LOG_FLAGS(2, "FSF_QTCB_EXCHANGE_CONFIG_DATA\n");
 784                 zfcp_fsf_exchange_config_data_handler(fsf_req);
 785                 break;
 786
 787         case FSF_QTCB_EXCHANGE_PORT_DATA:
 788                 ZFCP_LOG_FLAGS(2, "FSF_QTCB_EXCHANGE_PORT_DATA\n");
 789                 zfcp_fsf_exchange_port_data_handler(fsf_req);
 790                 break;
 791
 792         case FSF_QTCB_SEND_ELS:
 793                 ZFCP_LOG_FLAGS(2, "FSF_QTCB_SEND_ELS\n");
 794                 zfcp_fsf_send_els_handler(fsf_req);
 795                 break;
 796
 797         case FSF_QTCB_DOWNLOAD_CONTROL_FILE:
 798                 ZFCP_LOG_FLAGS(2, "FSF_QTCB_DOWNLOAD_CONTROL_FILE\n");
 799                 zfcp_fsf_control_file_handler(fsf_req);
 800                 break;
 801
 802         case FSF_QTCB_UPLOAD_CONTROL_FILE:
 803                 ZFCP_LOG_FLAGS(2, "FSF_QTCB_UPLOAD_CONTROL_FILE\n");
 804                 zfcp_fsf_control_file_handler(fsf_req);
 805                 break;
 806
 807         default:
 808                 ZFCP_LOG_FLAGS(2, "FSF_QTCB_UNKNOWN\n");
 809                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 810                 ZFCP_LOG_NORMAL("bug: Command issued by the device driver is "
 811                                 "not supported by the adapter %s\n",
 812                                 zfcp_get_busid_by_adapter(fsf_req->adapter));
 813                 if (fsf_req->fsf_command != fsf_req->qtcb->header.fsf_command)
 814                         ZFCP_LOG_NORMAL
 815                             ("bug: Command issued by the device driver differs "
 816                              "from the command returned by the adapter %s "
 817                              "(debug info 0x%x, 0x%x).\n",
 818                              zfcp_get_busid_by_adapter(fsf_req->adapter),
 819                              fsf_req->fsf_command,
 820                              fsf_req->qtcb->header.fsf_command);
 821         }
 822
 823         if (!erp_action)
 824                 return retval;
 825
 826         debug_text_event(adapter->erp_dbf, 3, "a_frh");
 827         debug_event(adapter->erp_dbf, 3, &erp_action->action, sizeof (int));
 828         zfcp_erp_async_handler(erp_action, 0);
 829
 830         return retval;
 831 }
 832
 833 /*
 834  * function:    zfcp_fsf_status_read
 835  *
 836  * purpose:     initiates a Status Read command at the specified adapter
 837  *
 838  * returns:
 839  */
 840 int
 841 zfcp_fsf_status_read(struct zfcp_adapter *adapter, int req_flags)
 842 {
 843         struct zfcp_fsf_req *fsf_req;
 844         struct fsf_status_read_buffer *status_buffer;
 845         unsigned long lock_flags;
 846         volatile struct qdio_buffer_element *sbale;
 847         int retval = 0;
 848
 849         /* setup new FSF request */
 850         retval = zfcp_fsf_req_create(adapter, FSF_QTCB_UNSOLICITED_STATUS,
 851                                      req_flags | ZFCP_REQ_NO_QTCB,
 852                                      adapter->pool.fsf_req_status_read,
 853                                      &lock_flags, &fsf_req);
 854         if (retval < 0) {
 855                 ZFCP_LOG_INFO("error: Could not create unsolicited status "
 856                               "buffer for adapter %s.\n",
 857                               zfcp_get_busid_by_adapter(adapter));
 858                 goto failed_req_create;
 859         }
 860
 861         sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
 862         sbale[0].flags |= SBAL_FLAGS0_TYPE_STATUS;
 863         sbale[2].flags |= SBAL_FLAGS_LAST_ENTRY;
 864         fsf_req->sbale_curr = 2;
 865
 866         status_buffer =
 867                 mempool_alloc(adapter->pool.data_status_read, GFP_ATOMIC);
 868         if (!status_buffer) {
 869                 ZFCP_LOG_NORMAL("bug: could not get some buffer\n");
 870                 goto failed_buf;
 871         }
 872         memset(status_buffer, 0, sizeof (struct fsf_status_read_buffer));
 873         fsf_req->data.status_read.buffer = status_buffer;
 874
 875         /* insert pointer to respective buffer */
 876         sbale = zfcp_qdio_sbale_curr(fsf_req);
 877         sbale->addr = (void *) status_buffer;
 878         sbale->length = sizeof(struct fsf_status_read_buffer);
 879
 880         /* start QDIO request for this FSF request */
 881         retval = zfcp_fsf_req_send(fsf_req, NULL);
 882         if (retval) {
 883                 ZFCP_LOG_DEBUG("error: Could not set-up unsolicited status "
 884                                "environment.\n");
 885                 goto failed_req_send;
 886         }
 887
 888         ZFCP_LOG_TRACE("Status Read request initiated (adapter%s)\n",
 889                        zfcp_get_busid_by_adapter(adapter));
 890         goto out;
 891
 892  failed_req_send:
 893         mempool_free(status_buffer, adapter->pool.data_status_read);
 894
 895  failed_buf:
 896         zfcp_fsf_req_free(fsf_req);
 897  failed_req_create:
 898  out:
 899         write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags);
 900         return retval;
 901 }
 902
 903 static int
 904 zfcp_fsf_status_read_port_closed(struct zfcp_fsf_req *fsf_req)
 905 {
 906         struct fsf_status_read_buffer *status_buffer;
 907         struct zfcp_adapter *adapter;
 908         struct zfcp_port *port;
 909         unsigned long flags;
 910
 911         status_buffer = fsf_req->data.status_read.buffer;
 912         adapter = fsf_req->adapter;
 913
 914         read_lock_irqsave(&zfcp_data.config_lock, flags);
 915         list_for_each_entry(port, &adapter->port_list_head, list)
 916             if (port->d_id == (status_buffer->d_id & ZFCP_DID_MASK))
 917                 break;
 918         read_unlock_irqrestore(&zfcp_data.config_lock, flags);
 919
 920         if (!port || (port->d_id != (status_buffer->d_id & ZFCP_DID_MASK))) {
 921                 ZFCP_LOG_NORMAL("bug: Reopen port indication received for"
 922                                 "nonexisting port with d_id 0x%08x on "
 923                                 "adapter %s. Ignored.\n",
 924                                 status_buffer->d_id & ZFCP_DID_MASK,
 925                                 zfcp_get_busid_by_adapter(adapter));
 926                 goto out;
 927         }
 928
 929         switch (status_buffer->status_subtype) {
 930
 931         case FSF_STATUS_READ_SUB_CLOSE_PHYS_PORT:
 932                 ZFCP_LOG_FLAGS(2, "FSF_STATUS_READ_SUB_CLOSE_PHYS_PORT\n");
 933                 debug_text_event(adapter->erp_dbf, 3, "unsol_pc_phys:");
 934                 zfcp_erp_port_reopen(port, 0);
 935                 break;
 936
 937         case FSF_STATUS_READ_SUB_ERROR_PORT:
 938                 ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_SUB_ERROR_PORT\n");
 939                 debug_text_event(adapter->erp_dbf, 1, "unsol_pc_err:");
 940                 zfcp_erp_port_shutdown(port, 0);
 941                 break;
 942
 943         default:
 944                 debug_text_event(adapter->erp_dbf, 0, "unsol_unk_sub:");
 945                 debug_exception(adapter->erp_dbf, 0,
 946                                 &status_buffer->status_subtype, sizeof (u32));
 947                 ZFCP_LOG_NORMAL("bug: Undefined status subtype received "
 948                                 "for a reopen indication on port with "
 949                                 "d_id 0x%08x on the adapter %s. "
 950                                 "Ignored. (debug info 0x%x)\n",
 951                                 status_buffer->d_id,
 952                                 zfcp_get_busid_by_adapter(adapter),
 953                                 status_buffer->status_subtype);
 954         }
 955  out:
 956         return 0;
 957 }
 958
 959 /*
 960  * function:    zfcp_fsf_status_read_handler
 961  *
 962  * purpose:     is called for finished Open Port command
 963  *
 964  * returns:
 965  */
 966 static int
 967 zfcp_fsf_status_read_handler(struct zfcp_fsf_req *fsf_req)
 968 {
 969         int retval = 0;
 970         struct zfcp_adapter *adapter = fsf_req->adapter;
 971         struct fsf_status_read_buffer *status_buffer =
 972             fsf_req->data.status_read.buffer;
 973
 974         if (fsf_req->status & ZFCP_STATUS_FSFREQ_DISMISSED) {
 975                 mempool_free(status_buffer, adapter->pool.data_status_read);
 976                 zfcp_fsf_req_cleanup(fsf_req);
 977                 goto out;
 978         }
 979
 980         switch (status_buffer->status_type) {
 981
 982         case FSF_STATUS_READ_PORT_CLOSED:
 983                 ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_PORT_CLOSED\n");
 984                 debug_text_event(adapter->erp_dbf, 3, "unsol_pclosed:");
 985                 debug_event(adapter->erp_dbf, 3,
 986                             &status_buffer->d_id, sizeof (u32));
 987                 zfcp_fsf_status_read_port_closed(fsf_req);
 988                 break;
 989
 990         case FSF_STATUS_READ_INCOMING_ELS:
 991                 ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_INCOMING_ELS\n");
 992                 debug_text_event(adapter->erp_dbf, 3, "unsol_els:");
 993                 zfcp_fsf_incoming_els(fsf_req);
 994                 break;
 995
 996         case FSF_STATUS_READ_SENSE_DATA_AVAIL:
 997                 ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_SENSE_DATA_AVAIL\n");
 998                 debug_text_event(adapter->erp_dbf, 3, "unsol_sense:");
 999                 ZFCP_LOG_INFO("unsolicited sense data received (adapter %s)\n",
1000                               zfcp_get_busid_by_adapter(adapter));
1001                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, (char *) status_buffer,
1002                               sizeof(struct fsf_status_read_buffer));
1003                 break;
1004
1005         case FSF_STATUS_READ_BIT_ERROR_THRESHOLD:
1006                 ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_BIT_ERROR_THRESHOLD\n");
1007                 debug_text_event(adapter->erp_dbf, 3, "unsol_bit_err:");
1008                 ZFCP_LOG_NORMAL("Bit error threshold data received:\n");
1009                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL,
1010                               (char *) status_buffer,
1011                               sizeof (struct fsf_status_read_buffer));
1012                 break;
1013
1014         case FSF_STATUS_READ_LINK_DOWN:
1015                 ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_LINK_DOWN\n");
1016                 debug_text_event(adapter->erp_dbf, 0, "unsol_link_down:");
1017                 ZFCP_LOG_INFO("Local link to adapter %s is down\n",
1018                               zfcp_get_busid_by_adapter(adapter));
1019                 atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED,
1020                                 &adapter->status);
1021                 zfcp_erp_adapter_failed(adapter);
1022                 break;
1023
1024         case FSF_STATUS_READ_LINK_UP:
1025                 ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_LINK_UP\n");
1026                 debug_text_event(adapter->erp_dbf, 2, "unsol_link_up:");
1027                 ZFCP_LOG_INFO("Local link to adapter %s was replugged. "
1028                               "Restarting operations on this adapter\n",
1029                               zfcp_get_busid_by_adapter(adapter));
1030                 /* All ports should be marked as ready to run again */
1031                 zfcp_erp_modify_adapter_status(adapter,
1032                                                ZFCP_STATUS_COMMON_RUNNING,
1033                                                ZFCP_SET);
1034                 zfcp_erp_adapter_reopen(adapter,
1035                                         ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED
1036                                         | ZFCP_STATUS_COMMON_ERP_FAILED);
1037                 break;
1038
1039         case FSF_STATUS_READ_CFDC_UPDATED:
1040                 ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_CFDC_UPDATED\n");
1041                 debug_text_event(adapter->erp_dbf, 2, "unsol_cfdc_update:");
1042                 ZFCP_LOG_INFO("CFDC has been updated on the adapter %s\n",
1043                               zfcp_get_busid_by_adapter(adapter));
1044                 zfcp_erp_adapter_access_changed(adapter);
1045                 break;
1046
1047         case FSF_STATUS_READ_CFDC_HARDENED:
1048                 ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_CFDC_HARDENED\n");
1049                 debug_text_event(adapter->erp_dbf, 2, "unsol_cfdc_harden:");
1050                 switch (status_buffer->status_subtype) {
1051                 case FSF_STATUS_READ_SUB_CFDC_HARDENED_ON_SE:
1052                         ZFCP_LOG_INFO("CFDC of adapter %s saved on SE\n",
1053                                       zfcp_get_busid_by_adapter(adapter));
1054                         break;
1055                 case FSF_STATUS_READ_SUB_CFDC_HARDENED_ON_SE2:
1056                         ZFCP_LOG_INFO("CFDC of adapter %s has been copied "
1057                                       "to the secondary SE\n",
1058                                 zfcp_get_busid_by_adapter(adapter));
1059                         break;
1060                 default:
1061                         ZFCP_LOG_INFO("CFDC of adapter %s has been hardened\n",
1062                                       zfcp_get_busid_by_adapter(adapter));
1063                 }
1064                 break;
1065
1066         default:
1067                 debug_text_event(adapter->erp_dbf, 0, "unsol_unknown:");
1068                 debug_exception(adapter->erp_dbf, 0,
1069                                 &status_buffer->status_type, sizeof (u32));
1070                 ZFCP_LOG_NORMAL("bug: An unsolicited status packet of unknown "
1071                                 "type was received (debug info 0x%x)\n",
1072                                 status_buffer->status_type);
1073                 ZFCP_LOG_DEBUG("Dump of status_read_buffer %p:\n",
1074                                status_buffer);
1075                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
1076                               (char *) status_buffer,
1077                               sizeof (struct fsf_status_read_buffer));
1078                 break;
1079         }
1080         mempool_free(status_buffer, adapter->pool.data_status_read);
1081         zfcp_fsf_req_cleanup(fsf_req);
1082         /*
1083          * recycle buffer and start new request repeat until outbound
1084          * queue is empty or adapter shutdown is requested
1085          */
1086         /*
1087          * FIXME(qdio):
1088          * we may wait in the req_create for 5s during shutdown, so
1089          * qdio_cleanup will have to wait at least that long before returning
1090          * with failure to allow us a proper cleanup under all circumstances
1091          */
1092         /*
1093          * FIXME:
1094          * allocation failure possible? (Is this code needed?)
1095          */
1096         retval = zfcp_fsf_status_read(adapter, 0);
1097         if (retval < 0) {
1098                 ZFCP_LOG_INFO("Failed to create unsolicited status read "
1099                               "request for the adapter %s.\n",
1100                               zfcp_get_busid_by_adapter(adapter));
1101                 /* temporary fix to avoid status read buffer shortage */
1102                 adapter->status_read_failed++;
1103                 if ((ZFCP_STATUS_READS_RECOM - adapter->status_read_failed)
1104                     < ZFCP_STATUS_READ_FAILED_THRESHOLD) {
1105                         ZFCP_LOG_INFO("restart adapter %s due to status read "
1106                                       "buffer shortage\n",
1107                                       zfcp_get_busid_by_adapter(adapter));
1108                         zfcp_erp_adapter_reopen(adapter, 0);
1109                 }
1110         }
1111  out:
1112         return retval;
1113 }
1114
1115 /*
1116  * function:    zfcp_fsf_abort_fcp_command
1117  *
1118  * purpose:     tells FSF to abort a running SCSI command
1119  *
1120  * returns:     address of initiated FSF request
1121  *              NULL - request could not be initiated
1122  *
1123  * FIXME(design): should be watched by a timeout !!!
1124  * FIXME(design) shouldn't this be modified to return an int
1125  *               also...don't know how though
1126  */
1127 struct zfcp_fsf_req *
1128 zfcp_fsf_abort_fcp_command(unsigned long old_req_id,
1129                            struct zfcp_adapter *adapter,
1130                            struct zfcp_unit *unit, int req_flags)
1131 {
1132         volatile struct qdio_buffer_element *sbale;
1133         unsigned long lock_flags;
1134         struct zfcp_fsf_req *fsf_req = NULL;
1135         int retval = 0;
1136
1137         /* setup new FSF request */
1138         retval = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND,
1139                                      req_flags, adapter->pool.fsf_req_abort,
1140                                      &lock_flags, &fsf_req);
1141         if (retval < 0) {
1142                 ZFCP_LOG_INFO("error: Failed to create an abort command "
1143                               "request for lun 0x%016Lx on port 0x%016Lx "
1144                               "on adapter %s.\n",
1145                               unit->fcp_lun,
1146                               unit->port->wwpn,
1147                               zfcp_get_busid_by_adapter(adapter));
1148                 goto out;
1149         }
1150
1151         sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
1152         sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
1153         sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
1154
1155         fsf_req->data.abort_fcp_command.unit = unit;
1156
1157         /* set handles of unit and its parent port in QTCB */
1158         fsf_req->qtcb->header.lun_handle = unit->handle;
1159         fsf_req->qtcb->header.port_handle = unit->port->handle;
1160
1161         /* set handle of request which should be aborted */
1162         fsf_req->qtcb->bottom.support.req_handle = (u64) old_req_id;
1163
1164         /* start QDIO request for this FSF request */
1165
1166         zfcp_fsf_start_scsi_er_timer(adapter);
1167         retval = zfcp_fsf_req_send(fsf_req, NULL);
1168         if (retval) {
1169                 del_timer(&adapter->scsi_er_timer);
1170                 ZFCP_LOG_INFO("error: Failed to send abort command request "
1171                               "on adapter %s, port 0x%016Lx, unit 0x%016Lx\n",
1172                               zfcp_get_busid_by_adapter(adapter),
1173                               unit->port->wwpn, unit->fcp_lun);
1174                 zfcp_fsf_req_free(fsf_req);
1175                 fsf_req = NULL;
1176                 goto out;
1177         }
1178
1179         ZFCP_LOG_DEBUG("Abort FCP Command request initiated "
1180                        "(adapter%s, port d_id=0x%08x, "
1181                        "unit x%016Lx, old_req_id=0x%lx)\n",
1182                        zfcp_get_busid_by_adapter(adapter),
1183                        unit->port->d_id,
1184                        unit->fcp_lun, old_req_id);
1185  out:
1186         write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags);
1187         return fsf_req;
1188 }
1189
1190 /*
1191  * function:    zfcp_fsf_abort_fcp_command_handler
1192  *
1193  * purpose:     is called for finished Abort FCP Command request
1194  *
1195  * returns:
1196  */
1197 static int
1198 zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *new_fsf_req)
1199 {
1200         int retval = -EINVAL;
1201         struct zfcp_unit *unit = new_fsf_req->data.abort_fcp_command.unit;
1202         unsigned char status_qual =
1203             new_fsf_req->qtcb->header.fsf_status_qual.word[0];
1204
1205         del_timer(&new_fsf_req->adapter->scsi_er_timer);
1206
1207         if (new_fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) {
1208                 /* do not set ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED */
1209                 goto skip_fsfstatus;
1210         }
1211
1212         /* evaluate FSF status in QTCB */
1213         switch (new_fsf_req->qtcb->header.fsf_status) {
1214
1215         case FSF_PORT_HANDLE_NOT_VALID:
1216                 if (status_qual >> 4 != status_qual % 0xf) {
1217                         ZFCP_LOG_FLAGS(2, "FSF_PORT_HANDLE_NOT_VALID\n");
1218                         debug_text_event(new_fsf_req->adapter->erp_dbf, 3,
1219                                          "fsf_s_phand_nv0");
1220                         /*
1221                          * In this case a command that was sent prior to a port
1222                          * reopen was aborted (handles are different). This is
1223                          * fine.
1224                          */
1225                 } else {
1226                         ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n");
1227                         ZFCP_LOG_INFO("Temporary port identifier 0x%x for "
1228                                       "port 0x%016Lx on adapter %s invalid. "
1229                                       "This may happen occasionally.\n",
1230                                       unit->port->handle,
1231                                       unit->port->wwpn,
1232                                       zfcp_get_busid_by_unit(unit));
1233                         ZFCP_LOG_INFO("status qualifier:\n");
1234                         ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_INFO,
1235                                       (char *) &new_fsf_req->qtcb->header.
1236                                       fsf_status_qual,
1237                                       sizeof (union fsf_status_qual));
1238                         /* Let's hope this sorts out the mess */
1239                         debug_text_event(new_fsf_req->adapter->erp_dbf, 1,
1240                                          "fsf_s_phand_nv1");
1241                         zfcp_erp_adapter_reopen(unit->port->adapter, 0);
1242                         new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1243                 }
1244                 break;
1245
1246         case FSF_LUN_HANDLE_NOT_VALID:
1247                 if (status_qual >> 4 != status_qual % 0xf) {
1248                         /* 2 */
1249                         ZFCP_LOG_FLAGS(0, "FSF_LUN_HANDLE_NOT_VALID\n");
1250                         debug_text_event(new_fsf_req->adapter->erp_dbf, 3,
1251                                          "fsf_s_lhand_nv0");
1252                         /*
1253                          * In this case a command that was sent prior to a unit
1254                          * reopen was aborted (handles are different).
1255                          * This is fine.
1256                          */
1257                 } else {
1258                         ZFCP_LOG_FLAGS(1, "FSF_LUN_HANDLE_NOT_VALID\n");
1259                         ZFCP_LOG_INFO
1260                             ("Warning: Temporary LUN identifier 0x%x of LUN "
1261                              "0x%016Lx on port 0x%016Lx on adapter %s is "
1262                              "invalid. This may happen in rare cases. "
1263                              "Trying to re-establish link.\n",
1264                              unit->handle,
1265                              unit->fcp_lun,
1266                              unit->port->wwpn,
1267                              zfcp_get_busid_by_unit(unit));
1268                         ZFCP_LOG_DEBUG("Status qualifier data:\n");
1269                         ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
1270                                       (char *) &new_fsf_req->qtcb->header.
1271                                       fsf_status_qual,
1272                                       sizeof (union fsf_status_qual));
1273                         /* Let's hope this sorts out the mess */
1274                         debug_text_event(new_fsf_req->adapter->erp_dbf, 1,
1275                                          "fsf_s_lhand_nv1");
1276                         zfcp_erp_port_reopen(unit->port, 0);
1277                         new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1278                 }
1279                 break;
1280
1281         case FSF_FCP_COMMAND_DOES_NOT_EXIST:
1282                 ZFCP_LOG_FLAGS(2, "FSF_FCP_COMMAND_DOES_NOT_EXIST\n");
1283                 retval = 0;
1284                 debug_text_event(new_fsf_req->adapter->erp_dbf, 3,
1285                                  "fsf_s_no_exist");
1286                 new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED;
1287                 break;
1288
1289         case FSF_PORT_BOXED:
1290                 /* 2 */
1291                 ZFCP_LOG_FLAGS(0, "FSF_PORT_BOXED\n");
1292                 ZFCP_LOG_INFO("Remote port 0x%016Lx on adapter %s needs to "
1293                               "be reopened\n", unit->port->wwpn,
1294                               zfcp_get_busid_by_unit(unit));
1295                 debug_text_event(new_fsf_req->adapter->erp_dbf, 2,
1296                                  "fsf_s_pboxed");
1297                 zfcp_erp_port_reopen(unit->port, 0);
1298                 new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR
1299                     | ZFCP_STATUS_FSFREQ_RETRY;
1300                 break;
1301
1302         case FSF_LUN_BOXED:
1303                 ZFCP_LOG_FLAGS(0, "FSF_LUN_BOXED\n");
1304                 ZFCP_LOG_INFO(
1305                         "unit 0x%016Lx on port 0x%016Lx on adapter %s needs "
1306                         "to be reopened\n",
1307                         unit->fcp_lun, unit->port->wwpn,
1308                         zfcp_get_busid_by_unit(unit));
1309                 debug_text_event(new_fsf_req->adapter->erp_dbf, 1, "fsf_s_lboxed");
1310                 zfcp_erp_unit_reopen(unit, 0);
1311                 zfcp_cmd_dbf_event_fsf("unitbox", new_fsf_req,
1312                         &new_fsf_req->qtcb->header.fsf_status_qual,
1313                         sizeof(union fsf_status_qual));
1314                 new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR
1315                         | ZFCP_STATUS_FSFREQ_RETRY;
1316                 break;
1317
1318         case FSF_ADAPTER_STATUS_AVAILABLE:
1319                 /* 2 */
1320                 ZFCP_LOG_FLAGS(0, "FSF_ADAPTER_STATUS_AVAILABLE\n");
1321                 switch (new_fsf_req->qtcb->header.fsf_status_qual.word[0]) {
1322                 case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
1323                         ZFCP_LOG_FLAGS(2,
1324                                        "FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n");
1325                         debug_text_event(new_fsf_req->adapter->erp_dbf, 1,
1326                                          "fsf_sq_ltest");
1327                         /* reopening link to port */
1328                         zfcp_erp_port_reopen(unit->port, 0);
1329                         new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1330                         break;
1331                 case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
1332                         ZFCP_LOG_FLAGS(2,
1333                                        "FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED\n");
1334                         /* SCSI stack will escalate */
1335                         debug_text_event(new_fsf_req->adapter->erp_dbf, 1,
1336                                          "fsf_sq_ulp");
1337                         new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1338                         break;
1339                 default:
1340                         ZFCP_LOG_NORMAL
1341                             ("bug: Wrong status qualifier 0x%x arrived.\n",
1342                              new_fsf_req->qtcb->header.fsf_status_qual.word[0]);
1343                         debug_text_event(new_fsf_req->adapter->erp_dbf, 0,
1344                                          "fsf_sq_inval:");
1345                         debug_exception(new_fsf_req->adapter->erp_dbf, 0,
1346                                         &new_fsf_req->qtcb->header.
1347                                         fsf_status_qual.word[0], sizeof (u32));
1348                         break;
1349                 }
1350                 break;
1351
1352         case FSF_GOOD:
1353                 /* 3 */
1354                 ZFCP_LOG_FLAGS(0, "FSF_GOOD\n");
1355                 retval = 0;
1356                 new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED;
1357                 break;
1358
1359         default:
1360                 ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented "
1361                                 "(debug info 0x%x)\n",
1362                                 new_fsf_req->qtcb->header.fsf_status);
1363                 debug_text_event(new_fsf_req->adapter->erp_dbf, 0,
1364                                  "fsf_s_inval:");
1365                 debug_exception(new_fsf_req->adapter->erp_dbf, 0,
1366                                 &new_fsf_req->qtcb->header.fsf_status,
1367                                 sizeof (u32));
1368                 break;
1369         }
1370  skip_fsfstatus:
1371         return retval;
1372 }
1373
1374 /**
1375  * zfcp_use_one_sbal - checks whether req buffer and resp bother each fit into
1376  *      one SBALE
1377  * Two scatter-gather lists are passed, one for the reqeust and one for the
1378  * response.
1379  */
1380 static inline int
1381 zfcp_use_one_sbal(struct scatterlist *req, int req_count,
1382                   struct scatterlist *resp, int resp_count)
1383 {
1384         return ((req_count == 1) &&
1385                 (resp_count == 1) &&
1386                 (((unsigned long) zfcp_sg_to_address(&req[0]) &
1387                   PAGE_MASK) ==
1388                  ((unsigned long) (zfcp_sg_to_address(&req[0]) +
1389                                    req[0].length - 1) & PAGE_MASK)) &&
1390                 (((unsigned long) zfcp_sg_to_address(&resp[0]) &
1391                   PAGE_MASK) ==
1392                  ((unsigned long) (zfcp_sg_to_address(&resp[0]) +
1393                                    resp[0].length - 1) & PAGE_MASK)));
1394 }
1395
1396 /**
1397  * zfcp_fsf_send_ct - initiate a Generic Service request (FC-GS)
1398  * @ct: pointer to struct zfcp_send_ct which conatins all needed data for
1399  *      the request
1400  * @pool: pointer to memory pool, if non-null this pool is used to allocate
1401  *      a struct zfcp_fsf_req
1402  * @erp_action: pointer to erp_action, if non-null the Generic Service request
1403  *      is sent within error recovery
1404  */
1405 int
1406 zfcp_fsf_send_ct(struct zfcp_send_ct *ct, mempool_t *pool,
1407                  struct zfcp_erp_action *erp_action)
1408 {
1409         volatile struct qdio_buffer_element *sbale;
1410         struct zfcp_port *port;
1411         struct zfcp_adapter *adapter;
1412         struct zfcp_fsf_req *fsf_req;
1413         unsigned long lock_flags;
1414         int bytes;
1415         int ret = 0;
1416
1417         port = ct->port;
1418         adapter = port->adapter;
1419
1420         ret = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_GENERIC,
1421                                   ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP,
1422                                   pool, &lock_flags, &fsf_req);
1423         if (ret < 0) {
1424                 ZFCP_LOG_INFO("error: Could not create CT request (FC-GS) for "
1425                               "adapter: %s\n",
1426                               zfcp_get_busid_by_adapter(adapter));
1427                 goto failed_req;
1428         }
1429
1430         if (erp_action != NULL) {
1431                 erp_action->fsf_req = fsf_req;
1432                 fsf_req->erp_action = erp_action;
1433         }
1434
1435         sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
1436         if (zfcp_use_one_sbal(ct->req, ct->req_count,
1437                               ct->resp, ct->resp_count)){
1438                 /* both request buffer and response buffer
1439                    fit into one sbale each */
1440                 sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE_READ;
1441                 sbale[2].addr = zfcp_sg_to_address(&ct->req[0]);
1442                 sbale[2].length = ct->req[0].length;
1443                 sbale[3].addr = zfcp_sg_to_address(&ct->resp[0]);
1444                 sbale[3].length = ct->resp[0].length;
1445                 sbale[3].flags |= SBAL_FLAGS_LAST_ENTRY;
1446         } else if (adapter->supported_features &
1447                    FSF_FEATURE_ELS_CT_CHAINED_SBALS) {
1448                 /* try to use chained SBALs */
1449                 bytes = zfcp_qdio_sbals_from_sg(fsf_req,
1450                                                 SBAL_FLAGS0_TYPE_WRITE_READ,
1451                                                 ct->req, ct->req_count,
1452                                                 ZFCP_MAX_SBALS_PER_CT_REQ);
1453                 if (bytes <= 0) {
1454                         ZFCP_LOG_INFO("error: creation of CT request failed "
1455                                       "on adapter %s\n",
1456                                       zfcp_get_busid_by_adapter(adapter));
1457                         if (bytes == 0)
1458                                 ret = -ENOMEM;
1459                         else
1460                                 ret = bytes;
1461
1462                         goto failed_send;
1463                 }
1464                 fsf_req->qtcb->bottom.support.req_buf_length = bytes;
1465                 fsf_req->sbale_curr = ZFCP_LAST_SBALE_PER_SBAL;
1466                 bytes = zfcp_qdio_sbals_from_sg(fsf_req,
1467                                                 SBAL_FLAGS0_TYPE_WRITE_READ,
1468                                                 ct->resp, ct->resp_count,
1469                                                 ZFCP_MAX_SBALS_PER_CT_REQ);
1470                 if (bytes <= 0) {
1471                         ZFCP_LOG_INFO("error: creation of CT request failed "
1472                                       "on adapter %s\n",
1473                                       zfcp_get_busid_by_adapter(adapter));
1474                         if (bytes == 0)
1475                                 ret = -ENOMEM;
1476                         else
1477                                 ret = bytes;
1478
1479                         goto failed_send;
1480                 }
1481                 fsf_req->qtcb->bottom.support.resp_buf_length = bytes;
1482         } else {
1483                 /* reject send generic request */
1484                 ZFCP_LOG_INFO(
1485                         "error: microcode does not support chained SBALs,"
1486                         "CT request too big (adapter %s)\n",
1487                         zfcp_get_busid_by_adapter(adapter));
1488                 ret = -EOPNOTSUPP;
1489                 goto failed_send;
1490         }
1491
1492         /* settings in QTCB */
1493         fsf_req->qtcb->header.port_handle = port->handle;
1494         fsf_req->qtcb->bottom.support.service_class = adapter->fc_service_class;
1495         fsf_req->qtcb->bottom.support.timeout = ct->timeout;
1496         fsf_req->data.send_ct = ct;
1497
1498         /* start QDIO request for this FSF request */
1499         ret = zfcp_fsf_req_send(fsf_req, ct->timer);
1500         if (ret) {
1501                 ZFCP_LOG_DEBUG("error: initiation of CT request failed "
1502                                "(adapter %s, port 0x%016Lx)\n",
1503                                zfcp_get_busid_by_adapter(adapter), port->wwpn);
1504                 goto failed_send;
1505         }
1506
1507         ZFCP_LOG_DEBUG("CT request initiated (adapter %s, port 0x%016Lx)\n",
1508                        zfcp_get_busid_by_adapter(adapter), port->wwpn);
1509         goto out;
1510
1511  failed_send:
1512         zfcp_fsf_req_free(fsf_req);
1513         if (erp_action != NULL) {
1514                 erp_action->fsf_req = NULL;
1515         }
1516  failed_req:
1517  out:
1518         write_unlock_irqrestore(&adapter->request_queue.queue_lock,
1519                                 lock_flags);
1520         return ret;
1521 }
1522
1523 /**
1524  * zfcp_fsf_send_ct_handler - handler for Generic Service requests
1525  * @fsf_req: pointer to struct zfcp_fsf_req
1526  *
1527  * Data specific for the Generic Service request is passed by
1528  * fsf_req->data.send_ct
1529  * Usually a specific handler for the request is called via
1530  * fsf_req->data.send_ct->handler at end of this function.
1531  */
1532 static int
1533 zfcp_fsf_send_ct_handler(struct zfcp_fsf_req *fsf_req)
1534 {
1535         struct zfcp_port *port;
1536         struct zfcp_adapter *adapter;
1537         struct zfcp_send_ct *send_ct;
1538         struct fsf_qtcb_header *header;
1539         struct fsf_qtcb_bottom_support *bottom;
1540         int retval = -EINVAL;
1541         u16 subtable, rule, counter;
1542
1543         adapter = fsf_req->adapter;
1544         send_ct = fsf_req->data.send_ct;
1545         port = send_ct->port;
1546         header = &fsf_req->qtcb->header;
1547         bottom = &fsf_req->qtcb->bottom.support;
1548
1549         if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)
1550                 goto skip_fsfstatus;
1551
1552         /* evaluate FSF status in QTCB */
1553         switch (header->fsf_status) {
1554
1555         case FSF_GOOD:
1556                 ZFCP_LOG_FLAGS(2,"FSF_GOOD\n");
1557                 retval = 0;
1558                 break;
1559
1560         case FSF_SERVICE_CLASS_NOT_SUPPORTED:
1561                 ZFCP_LOG_FLAGS(2, "FSF_SERVICE_CLASS_NOT_SUPPORTED\n");
1562                 if (adapter->fc_service_class <= 3) {
1563                         ZFCP_LOG_INFO("error: adapter %s does not support fc "
1564                                       "class %d.\n",
1565                                       zfcp_get_busid_by_port(port),
1566                                       adapter->fc_service_class);
1567                 } else {
1568                         ZFCP_LOG_INFO("bug: The fibre channel class at the "
1569                                       "adapter %s is invalid. "
1570                                       "(debug info %d)\n",
1571                                       zfcp_get_busid_by_port(port),
1572                                       adapter->fc_service_class);
1573                 }
1574                 /* stop operation for this adapter */
1575                 debug_text_exception(adapter->erp_dbf, 0, "fsf_s_class_nsup");
1576                 zfcp_erp_adapter_shutdown(adapter, 0);
1577                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1578                 break;
1579
1580         case FSF_ADAPTER_STATUS_AVAILABLE:
1581                 ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n");
1582                 switch (header->fsf_status_qual.word[0]){
1583                 case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
1584                         ZFCP_LOG_FLAGS(2,"FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n");
1585                         /* reopening link to port */
1586                         debug_text_event(adapter->erp_dbf, 1, "fsf_sq_ltest");
1587                         zfcp_test_link(port);
1588                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1589                         break;
1590                 case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
1591                         ZFCP_LOG_FLAGS(2,"FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED\n");
1592                         /* ERP strategy will escalate */
1593                         debug_text_event(adapter->erp_dbf, 1, "fsf_sq_ulp");
1594                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1595                         break;
1596                 default:
1597                         ZFCP_LOG_INFO("bug: Wrong status qualifier 0x%x "
1598                                       "arrived.\n",
1599                                       header->fsf_status_qual.word[0]);
1600                         break;
1601                 }
1602                 break;
1603
1604         case FSF_ACCESS_DENIED:
1605                 ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n");
1606                 ZFCP_LOG_NORMAL("access denied, cannot send generic service "
1607                                 "command (adapter %s, port d_id=0x%08x)\n",
1608                                 zfcp_get_busid_by_port(port), port->d_id);
1609                 for (counter = 0; counter < 2; counter++) {
1610                         subtable = header->fsf_status_qual.halfword[counter * 2];
1611                         rule = header->fsf_status_qual.halfword[counter * 2 + 1];
1612                         switch (subtable) {
1613                         case FSF_SQ_CFDC_SUBTABLE_OS:
1614                         case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN:
1615                         case FSF_SQ_CFDC_SUBTABLE_PORT_DID:
1616                         case FSF_SQ_CFDC_SUBTABLE_LUN:
1617                                 ZFCP_LOG_INFO("Access denied (%s rule %d)\n",
1618                                         zfcp_act_subtable_type[subtable], rule);
1619                                 break;
1620                         }
1621                 }
1622                 debug_text_event(adapter->erp_dbf, 1, "fsf_s_access");
1623                 zfcp_erp_port_access_denied(port);
1624                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1625                 break;
1626
1627         case FSF_GENERIC_COMMAND_REJECTED:
1628                 ZFCP_LOG_FLAGS(2, "FSF_GENERIC_COMMAND_REJECTED\n");
1629                 ZFCP_LOG_INFO("generic service command rejected "
1630                               "(adapter %s, port d_id=0x%08x)\n",
1631                               zfcp_get_busid_by_port(port), port->d_id);
1632                 ZFCP_LOG_INFO("status qualifier:\n");
1633                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_INFO,
1634                               (char *) &header->fsf_status_qual,
1635                               sizeof (union fsf_status_qual));
1636                 debug_text_event(adapter->erp_dbf, 1, "fsf_s_gcom_rej");
1637                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1638                 break;
1639
1640         case FSF_PORT_HANDLE_NOT_VALID:
1641                 ZFCP_LOG_FLAGS(2, "FSF_PORT_HANDLE_NOT_VALID\n");
1642                 ZFCP_LOG_DEBUG("Temporary port identifier 0x%x for port "
1643                                "0x%016Lx on adapter %s invalid. This may "
1644                                "happen occasionally.\n", port->handle,
1645                                port->wwpn, zfcp_get_busid_by_port(port));
1646                 ZFCP_LOG_INFO("status qualifier:\n");
1647                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_INFO,
1648                               (char *) &header->fsf_status_qual,
1649                               sizeof (union fsf_status_qual));
1650                 debug_text_event(adapter->erp_dbf, 1, "fsf_s_phandle_nv");
1651                 zfcp_erp_adapter_reopen(adapter, 0);
1652                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1653                 break;
1654
1655         case FSF_PORT_BOXED:
1656                 ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n");
1657                 ZFCP_LOG_INFO("port needs to be reopened "
1658                               "(adapter %s, port d_id=0x%08x)\n",
1659                               zfcp_get_busid_by_port(port), port->d_id);
1660                 debug_text_event(adapter->erp_dbf, 2, "fsf_s_pboxed");
1661                 zfcp_erp_port_reopen(port, 0);
1662                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR
1663                     | ZFCP_STATUS_FSFREQ_RETRY;
1664                 break;
1665
1666         /* following states should never occure, all cases avoided
1667            in zfcp_fsf_send_ct - but who knows ... */
1668         case FSF_PAYLOAD_SIZE_MISMATCH:
1669                 ZFCP_LOG_FLAGS(2, "FSF_PAYLOAD_SIZE_MISMATCH\n");
1670                 ZFCP_LOG_INFO("payload size mismatch (adapter: %s, "
1671                               "req_buf_length=%d, resp_buf_length=%d)\n",
1672                               zfcp_get_busid_by_adapter(adapter),
1673                               bottom->req_buf_length, bottom->resp_buf_length);
1674                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1675                 break;
1676         case FSF_REQUEST_SIZE_TOO_LARGE:
1677                 ZFCP_LOG_FLAGS(2, "FSF_REQUEST_SIZE_TOO_LARGE\n");
1678                 ZFCP_LOG_INFO("request size too large (adapter: %s, "
1679                               "req_buf_length=%d)\n",
1680                               zfcp_get_busid_by_adapter(adapter),
1681                               bottom->req_buf_length);
1682                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1683                 break;
1684         case FSF_RESPONSE_SIZE_TOO_LARGE:
1685                 ZFCP_LOG_FLAGS(2, "FSF_RESPONSE_SIZE_TOO_LARGE\n");
1686                 ZFCP_LOG_INFO("response size too large (adapter: %s, "
1687                               "resp_buf_length=%d)\n",
1688                               zfcp_get_busid_by_adapter(adapter),
1689                               bottom->resp_buf_length);
1690                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1691                 break;
1692         case FSF_SBAL_MISMATCH:
1693                 ZFCP_LOG_FLAGS(2, "FSF_SBAL_MISMATCH\n");
1694                 ZFCP_LOG_INFO("SBAL mismatch (adapter: %s, req_buf_length=%d, "
1695                               "resp_buf_length=%d)\n",
1696                               zfcp_get_busid_by_adapter(adapter),
1697                               bottom->req_buf_length, bottom->resp_buf_length);
1698                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1699                 break;
1700
1701        default:
1702                 ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented "
1703                                 "(debug info 0x%x)\n", header->fsf_status);
1704                 debug_text_event(adapter->erp_dbf, 0, "fsf_sq_inval:");
1705                 debug_exception(adapter->erp_dbf, 0,
1706                                 &header->fsf_status_qual.word[0], sizeof (u32));
1707                 break;
1708         }
1709
1710 skip_fsfstatus:
1711         send_ct->status = retval;
1712
1713         if (send_ct->handler != NULL)
1714                 send_ct->handler(send_ct->handler_data);
1715
1716         return retval;
1717 }
1718
1719 /**
1720  * zfcp_fsf_send_els - initiate an ELS command (FC-FS)
1721  * @els: pointer to struct zfcp_send_els which contains all needed data for
1722  *      the command.
1723  */
1724 int
1725 zfcp_fsf_send_els(struct zfcp_send_els *els)
1726 {
1727         volatile struct qdio_buffer_element *sbale;
1728         struct zfcp_fsf_req *fsf_req;
1729         fc_id_t d_id;
1730         struct zfcp_adapter *adapter;
1731         unsigned long lock_flags;
1732         int bytes;
1733         int ret = 0;
1734
1735         d_id = els->d_id;
1736         adapter = els->adapter;
1737
1738         ret = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_ELS,
1739                                   ZFCP_REQ_AUTO_CLEANUP,
1740                                   NULL, &lock_flags, &fsf_req);
1741         if (ret < 0) {
1742                 ZFCP_LOG_INFO("error: creation of ELS request failed "
1743                               "(adapter %s, port d_id: 0x%08x)\n",
1744                               zfcp_get_busid_by_adapter(adapter), d_id);
1745                 goto failed_req;
1746         }
1747
1748         sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
1749         if (zfcp_use_one_sbal(els->req, els->req_count,
1750                               els->resp, els->resp_count)){
1751                 /* both request buffer and response buffer
1752                    fit into one sbale each */
1753                 sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE_READ;
1754                 sbale[2].addr = zfcp_sg_to_address(&els->req[0]);
1755                 sbale[2].length = els->req[0].length;
1756                 sbale[3].addr = zfcp_sg_to_address(&els->resp[0]);
1757                 sbale[3].length = els->resp[0].length;
1758                 sbale[3].flags |= SBAL_FLAGS_LAST_ENTRY;
1759         } else if (adapter->supported_features &
1760                    FSF_FEATURE_ELS_CT_CHAINED_SBALS) {
1761                 /* try to use chained SBALs */
1762                 bytes = zfcp_qdio_sbals_from_sg(fsf_req,
1763                                                 SBAL_FLAGS0_TYPE_WRITE_READ,
1764                                                 els->req, els->req_count,
1765                                                 ZFCP_MAX_SBALS_PER_ELS_REQ);
1766                 if (bytes <= 0) {
1767                         ZFCP_LOG_INFO("error: creation of ELS request failed "
1768                                       "(adapter %s, port d_id: 0x%08x)\n",
1769                                       zfcp_get_busid_by_adapter(adapter), d_id);
1770                         if (bytes == 0) {
1771                                 ret = -ENOMEM;
1772                         } else {
1773                                 ret = bytes;
1774                         }
1775                         goto failed_send;
1776                 }
1777                 fsf_req->qtcb->bottom.support.req_buf_length = bytes;
1778                 fsf_req->sbale_curr = ZFCP_LAST_SBALE_PER_SBAL;
1779                 bytes = zfcp_qdio_sbals_from_sg(fsf_req,
1780                                                 SBAL_FLAGS0_TYPE_WRITE_READ,
1781                                                 els->resp, els->resp_count,
1782                                                 ZFCP_MAX_SBALS_PER_ELS_REQ);
1783                 if (bytes <= 0) {
1784                         ZFCP_LOG_INFO("error: creation of ELS request failed "
1785                                       "(adapter %s, port d_id: 0x%08x)\n",
1786                                       zfcp_get_busid_by_adapter(adapter), d_id);
1787                         if (bytes == 0) {
1788                                 ret = -ENOMEM;
1789                         } else {
1790                                 ret = bytes;
1791                         }
1792                         goto failed_send;
1793                 }
1794                 fsf_req->qtcb->bottom.support.resp_buf_length = bytes;
1795         } else {
1796                 /* reject request */
1797                 ZFCP_LOG_INFO("error: microcode does not support chained SBALs"
1798                               ", ELS request too big (adapter %s, "
1799                               "port d_id: 0x%08x)\n",
1800                               zfcp_get_busid_by_adapter(adapter), d_id);
1801                 ret = -EOPNOTSUPP;
1802                 goto failed_send;
1803         }
1804
1805         /* settings in QTCB */
1806         fsf_req->qtcb->bottom.support.d_id = d_id;
1807         fsf_req->qtcb->bottom.support.service_class = adapter->fc_service_class;
1808         fsf_req->qtcb->bottom.support.timeout = ZFCP_ELS_TIMEOUT;
1809         fsf_req->data.send_els = els;
1810
1811         sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
1812
1813         /* start QDIO request for this FSF request */
1814         ret = zfcp_fsf_req_send(fsf_req, els->timer);
1815         if (ret) {
1816                 ZFCP_LOG_DEBUG("error: initiation of ELS request failed "
1817                                "(adapter %s, port d_id: 0x%08x)\n",
1818                                zfcp_get_busid_by_adapter(adapter), d_id);
1819                 goto failed_send;
1820         }
1821
1822         ZFCP_LOG_DEBUG("ELS request initiated (adapter %s, port d_id: "
1823                        "0x%08x)\n", zfcp_get_busid_by_adapter(adapter), d_id);
1824         goto out;
1825
1826  failed_send:
1827         zfcp_fsf_req_free(fsf_req);
1828
1829  failed_req:
1830  out:
1831         write_unlock_irqrestore(&adapter->request_queue.queue_lock,
1832                                 lock_flags);
1833
1834         return ret;
1835 }
1836
1837 /**
1838  * zfcp_fsf_send_els_handler - handler for ELS commands
1839  * @fsf_req: pointer to struct zfcp_fsf_req
1840  *
1841  * Data specific for the ELS command is passed by
1842  * fsf_req->data.send_els
1843  * Usually a specific handler for the command is called via
1844  * fsf_req->data.send_els->handler at end of this function.
1845  */
1846 static int zfcp_fsf_send_els_handler(struct zfcp_fsf_req *fsf_req)
1847 {
1848         struct zfcp_adapter *adapter;
1849         fc_id_t d_id;
1850         struct zfcp_port *port;
1851         struct fsf_qtcb_header *header;
1852         struct fsf_qtcb_bottom_support *bottom;
1853         struct zfcp_send_els *send_els;
1854         int retval = -EINVAL;
1855         u16 subtable, rule, counter;
1856
1857         send_els = fsf_req->data.send_els;
1858         adapter = send_els->adapter;
1859         d_id = send_els->d_id;
1860         header = &fsf_req->qtcb->header;
1861         bottom = &fsf_req->qtcb->bottom.support;
1862
1863         if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)
1864                 goto skip_fsfstatus;
1865
1866         switch (header->fsf_status) {
1867
1868         case FSF_GOOD:
1869                 ZFCP_LOG_FLAGS(2, "FSF_GOOD\n");
1870                 retval = 0;
1871                 break;
1872
1873         case FSF_SERVICE_CLASS_NOT_SUPPORTED:
1874                 ZFCP_LOG_FLAGS(2, "FSF_SERVICE_CLASS_NOT_SUPPORTED\n");
1875                 if (adapter->fc_service_class <= 3) {
1876                         ZFCP_LOG_INFO("error: adapter %s does "
1877                                       "not support fibrechannel class %d.\n",
1878                                       zfcp_get_busid_by_adapter(adapter),
1879                                       adapter->fc_service_class);
1880                 } else {
1881                         ZFCP_LOG_INFO("bug: The fibrechannel class at "
1882                                       "adapter %s is invalid. "
1883                                       "(debug info %d)\n",
1884                                       zfcp_get_busid_by_adapter(adapter),
1885                                       adapter->fc_service_class);
1886                 }
1887                 /* stop operation for this adapter */
1888                 debug_text_exception(adapter->erp_dbf, 0, "fsf_s_class_nsup");
1889                 zfcp_erp_adapter_shutdown(adapter, 0);
1890                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1891                 break;
1892
1893         case FSF_ADAPTER_STATUS_AVAILABLE:
1894                 ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n");
1895                 switch (header->fsf_status_qual.word[0]){
1896                 case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
1897                         ZFCP_LOG_FLAGS(2,"FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n");
1898                         debug_text_event(adapter->erp_dbf, 1, "fsf_sq_ltest");
1899                         if (send_els->ls_code != ZFCP_LS_ADISC) {
1900                                 read_lock(&zfcp_data.config_lock);
1901                                 port = zfcp_get_port_by_did(adapter, d_id);
1902                                 if (port)
1903                                         zfcp_test_link(port);
1904                                 read_unlock(&zfcp_data.config_lock);
1905                         }
1906                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1907                         break;
1908                 case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
1909                         ZFCP_LOG_FLAGS(2,"FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED\n");
1910                         debug_text_event(adapter->erp_dbf, 1, "fsf_sq_ulp");
1911                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1912                         retval =
1913                           zfcp_handle_els_rjt(header->fsf_status_qual.word[1],
1914                                               (struct zfcp_ls_rjt_par *)
1915                                               &header->fsf_status_qual.word[2]);
1916                         break;
1917                 case FSF_SQ_RETRY_IF_POSSIBLE:
1918                         ZFCP_LOG_FLAGS(2, "FSF_SQ_RETRY_IF_POSSIBLE\n");
1919                         debug_text_event(adapter->erp_dbf, 1, "fsf_sq_retry");
1920                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1921                         break;
1922                 default:
1923                         ZFCP_LOG_INFO("bug: Wrong status qualifier 0x%x\n",
1924                                       header->fsf_status_qual.word[0]);
1925                         ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_INFO,
1926                                 (char*)header->fsf_status_qual.word, 16);
1927                 }
1928                 break;
1929
1930         case FSF_ELS_COMMAND_REJECTED:
1931                 ZFCP_LOG_FLAGS(2, "FSF_ELS_COMMAND_REJECTED\n");
1932                 ZFCP_LOG_INFO("ELS has been rejected because command filter "
1933                               "prohibited sending "
1934                               "(adapter: %s, port d_id: 0x%08x)\n",
1935                               zfcp_get_busid_by_adapter(adapter), d_id);
1936
1937                 break;
1938
1939         case FSF_PAYLOAD_SIZE_MISMATCH:
1940                 ZFCP_LOG_FLAGS(2, "FSF_PAYLOAD_SIZE_MISMATCH\n");
1941                 ZFCP_LOG_INFO(
1942                         "ELS request size and ELS response size must be either "
1943                         "both 0, or both greater than 0 "
1944                         "(adapter: %s, req_buf_length=%d resp_buf_length=%d)\n",
1945                         zfcp_get_busid_by_adapter(adapter),
1946                         bottom->req_buf_length,
1947                         bottom->resp_buf_length);
1948                 break;
1949
1950         case FSF_REQUEST_SIZE_TOO_LARGE:
1951                 ZFCP_LOG_FLAGS(2, "FSF_REQUEST_SIZE_TOO_LARGE\n");
1952                 ZFCP_LOG_INFO(
1953                         "Length of the ELS request buffer, "
1954                         "specified in QTCB bottom, "
1955                         "exceeds the size of the buffers "
1956                         "that have been allocated for ELS request data "
1957                         "(adapter: %s, req_buf_length=%d)\n",
1958                         zfcp_get_busid_by_adapter(adapter),
1959                         bottom->req_buf_length);
1960                 break;
1961
1962         case FSF_RESPONSE_SIZE_TOO_LARGE:
1963                 ZFCP_LOG_FLAGS(2, "FSF_RESPONSE_SIZE_TOO_LARGE\n");
1964                 ZFCP_LOG_INFO(
1965                         "Length of the ELS response buffer, "
1966                         "specified in QTCB bottom, "
1967                         "exceeds the size of the buffers "
1968                         "that have been allocated for ELS response data "
1969                         "(adapter: %s, resp_buf_length=%d)\n",
1970                         zfcp_get_busid_by_adapter(adapter),
1971                         bottom->resp_buf_length);
1972                 break;
1973
1974         case FSF_SBAL_MISMATCH:
1975                 /* should never occure, avoided in zfcp_fsf_send_els */
1976                 ZFCP_LOG_FLAGS(2, "FSF_SBAL_MISMATCH\n");
1977                 ZFCP_LOG_INFO("SBAL mismatch (adapter: %s, req_buf_length=%d, "
1978                               "resp_buf_length=%d)\n",
1979                               zfcp_get_busid_by_adapter(adapter),
1980                               bottom->req_buf_length, bottom->resp_buf_length);
1981                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
1982                 break;
1983
1984         case FSF_ACCESS_DENIED:
1985                 ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n");
1986                 ZFCP_LOG_NORMAL("access denied, cannot send ELS command "
1987                                 "(adapter %s, port d_id=0x%08x)\n",
1988                                 zfcp_get_busid_by_adapter(adapter), d_id);
1989                 for (counter = 0; counter < 2; counter++) {
1990                         subtable = header->fsf_status_qual.halfword[counter * 2];
1991                         rule = header->fsf_status_qual.halfword[counter * 2 + 1];
1992                         switch (subtable) {
1993                         case FSF_SQ_CFDC_SUBTABLE_OS:
1994                         case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN:
1995                         case FSF_SQ_CFDC_SUBTABLE_PORT_DID:
1996                         case FSF_SQ_CFDC_SUBTABLE_LUN:
1997                                 ZFCP_LOG_INFO("Access denied (%s rule %d)\n",
1998                                         zfcp_act_subtable_type[subtable], rule);
1999                                 break;
2000                         }
2001                 }
2002                 debug_text_event(adapter->erp_dbf, 1, "fsf_s_access");
2003                 read_lock(&zfcp_data.config_lock);
2004                 port = zfcp_get_port_by_did(adapter, d_id);
2005                 if (port != NULL)
2006                         zfcp_erp_port_access_denied(port);
2007                 read_unlock(&zfcp_data.config_lock);
2008                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
2009                 break;
2010
2011         default:
2012                 ZFCP_LOG_NORMAL(
2013                         "bug: An unknown FSF Status was presented "
2014                         "(adapter: %s, fsf_status=0x%08x)\n",
2015                         zfcp_get_busid_by_adapter(adapter),
2016                         header->fsf_status);
2017                 debug_text_event(adapter->erp_dbf, 0, "fsf_sq_inval");
2018                 debug_exception(adapter->erp_dbf, 0,
2019                         &header->fsf_status_qual.word[0], sizeof(u32));
2020                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
2021                 break;
2022         }
2023
2024 skip_fsfstatus:
2025         send_els->status = retval;
2026
2027         if (send_els->handler != 0)
2028                 send_els->handler(send_els->handler_data);
2029
2030         return retval;
2031 }
2032
2033 /*
2034  * function:
2035  *
2036  * purpose:
2037  *
2038  * returns:     address of initiated FSF request
2039  *              NULL - request could not be initiated
2040  */
2041 int
2042 zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action)
2043 {
2044         volatile struct qdio_buffer_element *sbale;
2045         unsigned long lock_flags;
2046         int retval = 0;
2047
2048         /* setup new FSF request */
2049         retval = zfcp_fsf_req_create(erp_action->adapter,
2050                                      FSF_QTCB_EXCHANGE_CONFIG_DATA,
2051                                      ZFCP_REQ_AUTO_CLEANUP,
2052                                      erp_action->adapter->pool.fsf_req_erp,
2053                                      &lock_flags, &(erp_action->fsf_req));
2054         if (retval < 0) {
2055                 ZFCP_LOG_INFO("error: Could not create exchange configuration "
2056                               "data request for adapter %s.\n",
2057                               zfcp_get_busid_by_adapter(erp_action->adapter));
2058                 goto out;
2059         }
2060
2061         sbale = zfcp_qdio_sbale_req(erp_action->fsf_req,
2062                                     erp_action->fsf_req->sbal_curr, 0);
2063         sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
2064         sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
2065
2066         erp_action->fsf_req->erp_action = erp_action;
2067         erp_action->fsf_req->qtcb->bottom.config.feature_selection =
2068                 (FSF_FEATURE_CFDC | FSF_FEATURE_LUN_SHARING);
2069
2070         /* start QDIO request for this FSF request */
2071         retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
2072         if (retval) {
2073                 ZFCP_LOG_INFO
2074                     ("error: Could not send exchange configuration data "
2075                      "command on the adapter %s\n",
2076                      zfcp_get_busid_by_adapter(erp_action->adapter));
2077                 zfcp_fsf_req_free(erp_action->fsf_req);
2078                 erp_action->fsf_req = NULL;
2079                 goto out;
2080         }
2081
2082         ZFCP_LOG_DEBUG("exchange configuration data request initiated "
2083                        "(adapter %s)\n",
2084                        zfcp_get_busid_by_adapter(erp_action->adapter));
2085
2086  out:
2087         write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock,
2088                                 lock_flags);
2089         return retval;
2090 }
2091
2092 /**
2093  * zfcp_fsf_exchange_config_evaluate
2094  * @fsf_req: fsf_req which belongs to xchg config data request
2095  * @xchg_ok: specifies if xchg config data was incomplete or complete (0/1)
2096  *
2097  * returns: -EIO on error, 0 otherwise
2098  */
2099 static int
2100 zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok)
2101 {
2102         struct fsf_qtcb_bottom_config *bottom;
2103         struct zfcp_adapter *adapter = fsf_req->adapter;
2104
2105         bottom = &fsf_req->qtcb->bottom.config;
2106         ZFCP_LOG_DEBUG("low/high QTCB version 0x%x/0x%x of FSF\n",
2107                        bottom->low_qtcb_version, bottom->high_qtcb_version);
2108         adapter->fsf_lic_version = bottom->lic_version;
2109         adapter->supported_features = bottom->supported_features;
2110
2111         if (xchg_ok) {
2112                 adapter->wwnn = bottom->nport_serv_param.wwnn;
2113                 adapter->wwpn = bottom->nport_serv_param.wwpn;
2114                 adapter->s_id = bottom->s_id & ZFCP_DID_MASK;
2115                 adapter->fc_topology = bottom->fc_topology;
2116                 adapter->fc_link_speed = bottom->fc_link_speed;
2117                 adapter->hydra_version = bottom->adapter_type;
2118         } else {
2119                 adapter->wwnn = 0;
2120                 adapter->wwpn = 0;
2121                 adapter->s_id = 0;
2122                 adapter->fc_topology = 0;
2123                 adapter->fc_link_speed = 0;
2124                 adapter->hydra_version = 0;
2125         }
2126
2127         if(adapter->supported_features & FSF_FEATURE_HBAAPI_MANAGEMENT){
2128                 adapter->hardware_version = bottom->hardware_version;
2129                 memcpy(adapter->serial_number, bottom->serial_number, 17);
2130                 EBCASC(adapter->serial_number, sizeof(adapter->serial_number));
2131         }
2132
2133         ZFCP_LOG_INFO("The adapter %s reported the following characteristics:\n"
2134                       "WWNN 0x%016Lx, "
2135                       "WWPN 0x%016Lx, "
2136                       "S_ID 0x%08x,\n"
2137                       "adapter version 0x%x, "
2138                       "LIC version 0x%x, "
2139                       "FC link speed %d Gb/s\n",
2140                       zfcp_get_busid_by_adapter(adapter),
2141                       adapter->wwnn,
2142                       adapter->wwpn,
2143                       (unsigned int) adapter->s_id,
2144                       adapter->hydra_version,
2145                       adapter->fsf_lic_version,
2146                       adapter->fc_link_speed);
2147         if (ZFCP_QTCB_VERSION < bottom->low_qtcb_version) {
2148                 ZFCP_LOG_NORMAL("error: the adapter %s "
2149                                 "only supports newer control block "
2150                                 "versions in comparison to this device "
2151                                 "driver (try updated device driver)\n",
2152                                 zfcp_get_busid_by_adapter(adapter));
2153                 debug_text_event(adapter->erp_dbf, 0, "low_qtcb_ver");
2154                 zfcp_erp_adapter_shutdown(adapter, 0);
2155                 return -EIO;
2156         }
2157         if (ZFCP_QTCB_VERSION > bottom->high_qtcb_version) {
2158                 ZFCP_LOG_NORMAL("error: the adapter %s "
2159                                 "only supports older control block "
2160                                 "versions than this device driver uses"
2161                                 "(consider a microcode upgrade)\n",
2162                                 zfcp_get_busid_by_adapter(adapter));
2163                 debug_text_event(adapter->erp_dbf, 0, "high_qtcb_ver");
2164                 zfcp_erp_adapter_shutdown(adapter, 0);
2165                 return -EIO;
2166         }
2167         return 0;
2168 }
2169
2170 /*
2171  * function:    zfcp_fsf_exchange_config_data_handler
2172  *
2173  * purpose:     is called for finished Exchange Configuration Data command
2174  *
2175  * returns:
2176  */
2177 static int
2178 zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *fsf_req)
2179 {
2180         struct fsf_qtcb_bottom_config *bottom;
2181         struct zfcp_adapter *adapter = fsf_req->adapter;
2182
2183         if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)
2184                 return -EIO;
2185
2186         switch (fsf_req->qtcb->header.fsf_status) {
2187
2188         case FSF_GOOD:
2189                 ZFCP_LOG_FLAGS(2, "FSF_GOOD\n");
2190
2191                 if (zfcp_fsf_exchange_config_evaluate(fsf_req, 1))
2192                         return -EIO;
2193
2194                 switch (adapter->fc_topology) {
2195                 case FSF_TOPO_P2P:
2196                         ZFCP_LOG_FLAGS(1, "FSF_TOPO_P2P\n");
2197                         ZFCP_LOG_NORMAL("error: Point-to-point fibrechannel "
2198                                         "configuration detected at adapter %s "
2199                                         "unsupported, shutting down adapter\n",
2200                                         zfcp_get_busid_by_adapter(adapter));
2201                         debug_text_event(fsf_req->adapter->erp_dbf, 0,
2202                                          "top-p-to-p");
2203                         zfcp_erp_adapter_shutdown(adapter, 0);
2204                         return -EIO;
2205                 case FSF_TOPO_AL:
2206                         ZFCP_LOG_FLAGS(1, "FSF_TOPO_AL\n");
2207                         ZFCP_LOG_NORMAL("error: Arbitrated loop fibrechannel "
2208                                         "topology detected at adapter %s "
2209                                         "unsupported, shutting down adapter\n",
2210                                         zfcp_get_busid_by_adapter(adapter));
2211                         debug_text_event(fsf_req->adapter->erp_dbf, 0,
2212                                          "top-al");
2213                         zfcp_erp_adapter_shutdown(adapter, 0);
2214                         return -EIO;
2215                 case FSF_TOPO_FABRIC:
2216                         ZFCP_LOG_FLAGS(1, "FSF_TOPO_FABRIC\n");
2217                         ZFCP_LOG_INFO("Switched fabric fibrechannel "
2218                                       "network detected at adapter %s.\n",
2219                                       zfcp_get_busid_by_adapter(adapter));
2220                         break;
2221                 default:
2222                         ZFCP_LOG_NORMAL("bug: The fibrechannel topology "
2223                                         "reported by the exchange "
2224                                         "configuration command for "
2225                                         "the adapter %s is not "
2226                                         "of a type known to the zfcp "
2227                                         "driver, shutting down adapter\n",
2228                                         zfcp_get_busid_by_adapter(adapter));
2229                         debug_text_exception(fsf_req->adapter->erp_dbf, 0,
2230                                              "unknown-topo");
2231                         zfcp_erp_adapter_shutdown(adapter, 0);
2232                         return -EIO;
2233                 }
2234                 bottom = &fsf_req->qtcb->bottom.config;
2235                 if (bottom->max_qtcb_size < sizeof(struct fsf_qtcb)) {
2236                         ZFCP_LOG_NORMAL("bug: Maximum QTCB size (%d bytes) "
2237                                         "allowed by the adapter %s "
2238                                         "is lower than the minimum "
2239                                         "required by the driver (%ld bytes).\n",
2240                                         bottom->max_qtcb_size,
2241                                         zfcp_get_busid_by_adapter(adapter),
2242                                         sizeof(struct fsf_qtcb));
2243                         debug_text_event(fsf_req->adapter->erp_dbf, 0,
2244                                          "qtcb-size");
2245                         debug_event(fsf_req->adapter->erp_dbf, 0,
2246                                     &bottom->max_qtcb_size, sizeof (u32));
2247                         zfcp_erp_adapter_shutdown(adapter, 0);
2248                         return -EIO;
2249                 }
2250                 atomic_set_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK,
2251                                 &adapter->status);
2252                 break;
2253         case FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE:
2254                 debug_text_event(adapter->erp_dbf, 0, "xchg-inco");
2255
2256                 if (zfcp_fsf_exchange_config_evaluate(fsf_req, 0))
2257                         return -EIO;
2258
2259                 ZFCP_LOG_INFO("Local link to adapter %s is down\n",
2260                               zfcp_get_busid_by_adapter(adapter));
2261                 atomic_set_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK |
2262                                 ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED,
2263                                 &adapter->status);
2264                 zfcp_erp_adapter_failed(adapter);
2265                 break;
2266         default:
2267                 debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf-stat-ng");
2268                 debug_event(fsf_req->adapter->erp_dbf, 0,
2269                             &fsf_req->qtcb->header.fsf_status, sizeof (u32));
2270                 zfcp_erp_adapter_shutdown(adapter, 0);
2271                 return -EIO;
2272         }
2273         return 0;
2274 }
2275
2276 /**
2277  * zfcp_fsf_exchange_port_data - request information about local port
2278  * @adapter: for which port data is requested
2279  * @data: response to exchange port data request
2280  */
2281 int
2282 zfcp_fsf_exchange_port_data(struct zfcp_adapter *adapter,
2283                             struct fsf_qtcb_bottom_port *data)
2284 {
2285         volatile struct qdio_buffer_element *sbale;
2286         int retval = 0;
2287         unsigned long lock_flags;
2288         struct zfcp_fsf_req *fsf_req;
2289         struct timer_list *timer;
2290
2291         if(!(adapter->supported_features & FSF_FEATURE_HBAAPI_MANAGEMENT)){
2292                 ZFCP_LOG_INFO("error: exchange port data "
2293                               "command not supported by adapter %s\n",
2294                               zfcp_get_busid_by_adapter(adapter));
2295                 return -EOPNOTSUPP;
2296         }
2297
2298         timer = kmalloc(sizeof(struct timer_list), GFP_KERNEL);
2299         if (!timer)
2300                 return -ENOMEM;
2301
2302         /* setup new FSF request */
2303         retval = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA,
2304                                      0, 0, &lock_flags, &fsf_req);
2305         if (retval < 0) {
2306                 ZFCP_LOG_INFO("error: Out of resources. Could not create an "
2307                               "exchange port data request for"
2308                               "the adapter %s.\n",
2309                               zfcp_get_busid_by_adapter(adapter));
2310                 write_unlock_irqrestore(&adapter->request_queue.queue_lock,
2311                                         lock_flags);
2312                 goto out;
2313         }
2314
2315         sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
2316         sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
2317         sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
2318
2319         fsf_req->data.port_data = data;
2320
2321         init_timer(timer);
2322         timer->function = zfcp_fsf_request_timeout_handler;
2323         timer->data = (unsigned long) adapter;
2324         timer->expires = ZFCP_FSF_REQUEST_TIMEOUT;
2325
2326         retval = zfcp_fsf_req_send(fsf_req, timer);
2327         if (retval) {
2328                 ZFCP_LOG_INFO("error: Could not send an exchange port data "
2329                               "command on the adapter %s\n",
2330                               zfcp_get_busid_by_adapter(adapter));
2331                 zfcp_fsf_req_free(fsf_req);
2332                 write_unlock_irqrestore(&adapter->request_queue.queue_lock,
2333                                         lock_flags);
2334                 goto out;
2335         }
2336
2337         ZFCP_LOG_DEBUG("Exchange Port Data request initiated (adapter %s)\n",
2338                        zfcp_get_busid_by_adapter(adapter));
2339
2340         write_unlock_irqrestore(&adapter->request_queue.queue_lock,
2341                                 lock_flags);
2342
2343         wait_event(fsf_req->completion_wq,
2344                    fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
2345         del_timer_sync(timer);
2346         zfcp_fsf_req_cleanup(fsf_req);
2347  out:
2348         kfree(timer);
2349         return retval;
2350 }
2351
2352
2353 /**
2354  * zfcp_fsf_exchange_port_data_handler - handler for exchange_port_data request
2355  * @fsf_req: pointer to struct zfcp_fsf_req
2356  */
2357 static void
2358 zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *fsf_req)
2359 {
2360         struct fsf_qtcb_bottom_port *bottom;
2361         struct fsf_qtcb_bottom_port *data = fsf_req->data.port_data;
2362
2363         if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)
2364                 return;
2365
2366         switch (fsf_req->qtcb->header.fsf_status) {
2367         case FSF_GOOD:
2368                 ZFCP_LOG_FLAGS(2,"FSF_GOOD\n");
2369                 bottom = &fsf_req->qtcb->bottom.port;
2370                 memcpy(data, bottom, sizeof(*data));
2371                 break;
2372
2373         default:
2374                 debug_text_event(fsf_req->adapter->erp_dbf, 0, "xchg-port-ng");
2375                 debug_event(fsf_req->adapter->erp_dbf, 0,
2376                             &fsf_req->qtcb->header.fsf_status, sizeof(u32));
2377         }
2378 }
2379
2380
2381 /*
2382  * function:    zfcp_fsf_open_port
2383  *
2384  * purpose:
2385  *
2386  * returns:     address of initiated FSF request
2387  *              NULL - request could not be initiated
2388  */
2389 int
2390 zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
2391 {
2392         volatile struct qdio_buffer_element *sbale;
2393         unsigned long lock_flags;
2394         int retval = 0;
2395
2396         /* setup new FSF request */
2397         retval = zfcp_fsf_req_create(erp_action->adapter,
2398                                      FSF_QTCB_OPEN_PORT_WITH_DID,
2399                                      ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP,
2400                                      erp_action->adapter->pool.fsf_req_erp,
2401                                      &lock_flags, &(erp_action->fsf_req));
2402         if (retval < 0) {
2403                 ZFCP_LOG_INFO("error: Could not create open port request "
2404                               "for port 0x%016Lx on adapter %s.\n",
2405                               erp_action->port->wwpn,
2406                               zfcp_get_busid_by_adapter(erp_action->adapter));
2407                 goto out;
2408         }
2409
2410         sbale = zfcp_qdio_sbale_req(erp_action->fsf_req,
2411                                     erp_action->fsf_req->sbal_curr, 0);
2412         sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
2413         sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
2414
2415         erp_action->fsf_req->qtcb->bottom.support.d_id = erp_action->port->d_id;
2416         atomic_set_mask(ZFCP_STATUS_COMMON_OPENING, &erp_action->port->status);
2417         erp_action->fsf_req->data.open_port.port = erp_action->port;
2418         erp_action->fsf_req->erp_action = erp_action;
2419
2420         /* start QDIO request for this FSF request */
2421         retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
2422         if (retval) {
2423                 ZFCP_LOG_INFO("error: Could not send open port request for "
2424                               "port 0x%016Lx on adapter %s.\n",
2425                               erp_action->port->wwpn,
2426                               zfcp_get_busid_by_adapter(erp_action->adapter));
2427                 zfcp_fsf_req_free(erp_action->fsf_req);
2428                 erp_action->fsf_req = NULL;
2429                 goto out;
2430         }
2431
2432         ZFCP_LOG_DEBUG("open port request initiated "
2433                        "(adapter %s,  port 0x%016Lx)\n",
2434                        zfcp_get_busid_by_adapter(erp_action->adapter),
2435                        erp_action->port->wwpn);
2436  out:
2437         write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock,
2438                                 lock_flags);
2439         return retval;
2440 }
2441
2442 /*
2443  * function:    zfcp_fsf_open_port_handler
2444  *
2445  * purpose:     is called for finished Open Port command
2446  *
2447  * returns:
2448  */
2449 static int
2450 zfcp_fsf_open_port_handler(struct zfcp_fsf_req *fsf_req)
2451 {
2452         int retval = -EINVAL;
2453         struct zfcp_port *port;
2454         struct fsf_plogi *plogi;
2455         struct fsf_qtcb_header *header;
2456         u16 subtable, rule, counter;
2457
2458         port = fsf_req->data.open_port.port;
2459         header = &fsf_req->qtcb->header;
2460
2461         if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) {
2462                 /* don't change port status in our bookkeeping */
2463                 goto skip_fsfstatus;
2464         }
2465
2466         /* evaluate FSF status in QTCB */
2467         switch (header->fsf_status) {
2468
2469         case FSF_PORT_ALREADY_OPEN:
2470                 ZFCP_LOG_FLAGS(0, "FSF_PORT_ALREADY_OPEN\n");
2471                 ZFCP_LOG_NORMAL("bug: remote port 0x%016Lx on adapter %s "
2472                                 "is already open.\n",
2473                                 port->wwpn, zfcp_get_busid_by_port(port));
2474                 debug_text_exception(fsf_req->adapter->erp_dbf, 0,
2475                                      "fsf_s_popen");
2476                 /*
2477                  * This is a bug, however operation should continue normally
2478                  * if it is simply ignored
2479                  */
2480                 break;
2481
2482         case FSF_ACCESS_DENIED:
2483                 ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n");
2484                 ZFCP_LOG_NORMAL("Access denied, cannot open port 0x%016Lx "
2485                                 "on adapter %s\n",
2486                                 port->wwpn, zfcp_get_busid_by_port(port));
2487                 for (counter = 0; counter < 2; counter++) {
2488                         subtable = header->fsf_status_qual.halfword[counter * 2];
2489                         rule = header->fsf_status_qual.halfword[counter * 2 + 1];
2490                         switch (subtable) {
2491                         case FSF_SQ_CFDC_SUBTABLE_OS:
2492                         case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN:
2493                         case FSF_SQ_CFDC_SUBTABLE_PORT_DID:
2494                         case FSF_SQ_CFDC_SUBTABLE_LUN:
2495                                 ZFCP_LOG_INFO("Access denied (%s rule %d)\n",
2496                                         zfcp_act_subtable_type[subtable], rule);
2497                                 break;
2498                         }
2499                 }
2500                 debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_access");
2501                 zfcp_erp_port_access_denied(port);
2502                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
2503                 break;
2504
2505         case FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED:
2506                 ZFCP_LOG_FLAGS(1, "FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED\n");
2507                 ZFCP_LOG_INFO("error: The FSF adapter is out of resources. "
2508                               "The remote port 0x%016Lx on adapter %s "
2509                               "could not be opened. Disabling it.\n",
2510                               port->wwpn, zfcp_get_busid_by_port(port));
2511                 debug_text_event(fsf_req->adapter->erp_dbf, 1,
2512                                  "fsf_s_max_ports");
2513                 zfcp_erp_port_failed(port);
2514                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
2515                 break;
2516
2517         case FSF_ADAPTER_STATUS_AVAILABLE:
2518                 ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n");
2519                 switch (header->fsf_status_qual.word[0]) {
2520                 case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
2521                         ZFCP_LOG_FLAGS(2,
2522                                        "FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n");
2523                         debug_text_event(fsf_req->adapter->erp_dbf, 1,
2524                                          "fsf_sq_ltest");
2525                         /* ERP strategy will escalate */
2526                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
2527                         break;
2528                 case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
2529                         /* ERP strategy will escalate */
2530                         debug_text_event(fsf_req->adapter->erp_dbf, 1,
2531                                          "fsf_sq_ulp");
2532                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
2533                         break;
2534                 case FSF_SQ_NO_RETRY_POSSIBLE:
2535                         ZFCP_LOG_FLAGS(0, "FSF_SQ_NO_RETRY_POSSIBLE\n");
2536                         ZFCP_LOG_NORMAL("The remote port 0x%016Lx on "
2537                                         "adapter %s could not be opened. "
2538                                         "Disabling it.\n",
2539                                         port->wwpn,
2540                                         zfcp_get_busid_by_port(port));
2541                         debug_text_exception(fsf_req->adapter->erp_dbf, 0,
2542                                              "fsf_sq_no_retry");
2543                         zfcp_erp_port_failed(port);
2544                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
2545                         break;
2546                 default:
2547                         ZFCP_LOG_NORMAL
2548                             ("bug: Wrong status qualifier 0x%x arrived.\n",
2549                              header->fsf_status_qual.word[0]);
2550                         debug_text_event(fsf_req->adapter->erp_dbf, 0,
2551                                          "fsf_sq_inval:");
2552                         debug_exception(
2553                                 fsf_req->adapter->erp_dbf, 0,
2554                                 &header->fsf_status_qual.word[0],
2555                                 sizeof (u32));
2556                         break;
2557                 }
2558                 break;
2559
2560         case FSF_GOOD:
2561                 ZFCP_LOG_FLAGS(3, "FSF_GOOD\n");
2562                 /* save port handle assigned by FSF */
2563                 port->handle = header->port_handle;
2564                 ZFCP_LOG_INFO("The remote port 0x%016Lx via adapter %s "
2565                               "was opened, it's port handle is 0x%x\n",
2566                               port->wwpn, zfcp_get_busid_by_port(port),
2567                               port->handle);
2568                 /* mark port as open */
2569                 atomic_set_mask(ZFCP_STATUS_COMMON_OPEN |
2570                                 ZFCP_STATUS_PORT_PHYS_OPEN, &port->status);
2571                 retval = 0;
2572                 /* check whether D_ID has changed during open */
2573                 /*
2574                  * FIXME: This check is not airtight, as the FCP channel does
2575                  * not monitor closures of target port connections caused on
2576                  * the remote side. Thus, they might miss out on invalidating
2577                  * locally cached WWPNs (and other N_Port parameters) of gone
2578                  * target ports. So, our heroic attempt to make things safe
2579                  * could be undermined by 'open port' response data tagged with
2580                  * obsolete WWPNs. Another reason to monitor potential
2581                  * connection closures ourself at least (by interpreting
2582                  * incoming ELS' and unsolicited status). It just crosses my
2583                  * mind that one should be able to cross-check by means of
2584                  * another GID_PN straight after a port has been opened.
2585                  * Alternately, an ADISC/PDISC ELS should suffice, as well.
2586                  */
2587                 plogi = (struct fsf_plogi *) fsf_req->qtcb->bottom.support.els;
2588                 if (!atomic_test_mask(ZFCP_STATUS_PORT_NO_WWPN, &port->status))
2589                 {
2590                         if (fsf_req->qtcb->bottom.support.els1_length <
2591                             ((((unsigned long) &plogi->serv_param.wwpn) -
2592                               ((unsigned long) plogi)) + sizeof (u64))) {
2593                                 ZFCP_LOG_INFO(
2594                                         "warning: insufficient length of "
2595                                         "PLOGI payload (%i)\n",
2596                                         fsf_req->qtcb->bottom.support.els1_length);
2597                                 debug_text_event(fsf_req->adapter->erp_dbf, 0,
2598                                                  "fsf_s_short_plogi:");
2599                                 /* skip sanity check and assume wwpn is ok */
2600                         } else {
2601                                 if (plogi->serv_param.wwpn != port->wwpn) {
2602                                         ZFCP_LOG_INFO("warning: d_id of port "
2603                                                       "0x%016Lx changed during "
2604                                                       "open\n", port->wwpn);
2605                                         debug_text_event(
2606                                                 fsf_req->adapter->erp_dbf, 0,
2607                                                 "fsf_s_did_change:");
2608                                         atomic_clear_mask(
2609                                                 ZFCP_STATUS_PORT_DID_DID,
2610                                                 &port->status);
2611                                 } else
2612                                         port->wwnn = plogi->serv_param.wwnn;
2613                         }
2614                 }
2615                 break;
2616
2617         case FSF_UNKNOWN_OP_SUBTYPE:
2618                 /* should never occure, subtype not set in zfcp_fsf_open_port */
2619                 ZFCP_LOG_FLAGS(2, "FSF_UNKNOWN_OP_SUBTYPE\n");
2620                 ZFCP_LOG_INFO("unknown operation subtype (adapter: %s, "
2621                               "op_subtype=0x%x)\n",
2622                               zfcp_get_busid_by_port(port),
2623                               fsf_req->qtcb->bottom.support.operation_subtype);
2624                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
2625                 break;
2626
2627         default:
2628                 ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented "
2629                                 "(debug info 0x%x)\n",
2630                                 header->fsf_status);
2631                 debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_s_inval:");
2632                 debug_exception(fsf_req->adapter->erp_dbf, 0,
2633                                 &header->fsf_status, sizeof (u32));
2634                 break;
2635         }
2636
2637  skip_fsfstatus:
2638         atomic_clear_mask(ZFCP_STATUS_COMMON_OPENING, &port->status);
2639         return retval;
2640 }
2641
2642 /*
2643  * function:    zfcp_fsf_close_port
2644  *
2645  * purpose:     submit FSF command "close port"
2646  *
2647  * returns:     address of initiated FSF request
2648  *              NULL - request could not be initiated
2649  */
2650 int
2651 zfcp_fsf_close_port(struct zfcp_erp_action *erp_action)
2652 {
2653         volatile struct qdio_buffer_element *sbale;
2654         unsigned long lock_flags;
2655         int retval = 0;
2656
2657         /* setup new FSF request */
2658         retval = zfcp_fsf_req_create(erp_action->adapter,
2659                                      FSF_QTCB_CLOSE_PORT,
2660                                      ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP,
2661                                      erp_action->adapter->pool.fsf_req_erp,
2662                                      &lock_flags, &(erp_action->fsf_req));
2663         if (retval < 0) {
2664                 ZFCP_LOG_INFO("error: Could not create a close port request "
2665                               "for port 0x%016Lx on adapter %s.\n",
2666                               erp_action->port->wwpn,
2667                               zfcp_get_busid_by_adapter(erp_action->adapter));
2668                 goto out;
2669         }
2670
2671         sbale = zfcp_qdio_sbale_req(erp_action->fsf_req,
2672                                     erp_action->fsf_req->sbal_curr, 0);
2673         sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
2674         sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
2675
2676         atomic_set_mask(ZFCP_STATUS_COMMON_CLOSING, &erp_action->port->status);
2677         erp_action->fsf_req->data.close_port.port = erp_action->port;
2678         erp_action->fsf_req->erp_action = erp_action;
2679         erp_action->fsf_req->qtcb->header.port_handle =
2680             erp_action->port->handle;
2681
2682         /* start QDIO request for this FSF request */
2683         retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
2684         if (retval) {
2685                 ZFCP_LOG_INFO("error: Could not send a close port request for "
2686                               "port 0x%016Lx on adapter %s.\n",
2687                               erp_action->port->wwpn,
2688                               zfcp_get_busid_by_adapter(erp_action->adapter));
2689                 zfcp_fsf_req_free(erp_action->fsf_req);
2690                 erp_action->fsf_req = NULL;
2691                 goto out;
2692         }
2693
2694         ZFCP_LOG_TRACE("close port request initiated "
2695                        "(adapter %s, port 0x%016Lx)\n",
2696                        zfcp_get_busid_by_adapter(erp_action->adapter),
2697                        erp_action->port->wwpn);
2698  out:
2699         write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock,
2700                                 lock_flags);
2701         return retval;
2702 }
2703
2704 /*
2705  * function:    zfcp_fsf_close_port_handler
2706  *
2707  * purpose:     is called for finished Close Port FSF command
2708  *
2709  * returns:
2710  */
2711 static int
2712 zfcp_fsf_close_port_handler(struct zfcp_fsf_req *fsf_req)
2713 {
2714         int retval = -EINVAL;
2715         struct zfcp_port *port;
2716
2717         port = fsf_req->data.close_port.port;
2718
2719         if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) {
2720                 /* don't change port status in our bookkeeping */
2721                 goto skip_fsfstatus;
2722         }
2723
2724         /* evaluate FSF status in QTCB */
2725         switch (fsf_req->qtcb->header.fsf_status) {
2726
2727         case FSF_PORT_HANDLE_NOT_VALID:
2728                 ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n");
2729                 ZFCP_LOG_INFO("Temporary port identifier 0x%x for port "
2730                               "0x%016Lx on adapter %s invalid. This may happen "
2731                               "occasionally.\n", port->handle,
2732                               port->wwpn, zfcp_get_busid_by_port(port));
2733                 ZFCP_LOG_DEBUG("status qualifier:\n");
2734                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
2735                               (char *) &fsf_req->qtcb->header.fsf_status_qual,
2736                               sizeof (union fsf_status_qual));
2737                 debug_text_event(fsf_req->adapter->erp_dbf, 1,
2738                                  "fsf_s_phand_nv");
2739                 zfcp_erp_adapter_reopen(port->adapter, 0);
2740                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
2741                 break;
2742
2743         case FSF_ADAPTER_STATUS_AVAILABLE:
2744                 ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n");
2745                 /* Note: FSF has actually closed the port in this case.
2746                  * The status code is just daft. Fingers crossed for a change
2747                  */
2748                 retval = 0;
2749                 break;
2750
2751         case FSF_GOOD:
2752                 ZFCP_LOG_FLAGS(3, "FSF_GOOD\n");
2753                 ZFCP_LOG_TRACE("remote port 0x016%Lx on adapter %s closed, "
2754                                "port handle 0x%x\n", port->wwpn,
2755                                zfcp_get_busid_by_port(port), port->handle);
2756                 zfcp_erp_modify_port_status(port,
2757                                             ZFCP_STATUS_COMMON_OPEN,
2758                                             ZFCP_CLEAR);
2759                 retval = 0;
2760                 break;
2761
2762         default:
2763                 ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented "
2764                                 "(debug info 0x%x)\n",
2765                                 fsf_req->qtcb->header.fsf_status);
2766                 debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_s_inval:");
2767                 debug_exception(fsf_req->adapter->erp_dbf, 0,
2768                                 &fsf_req->qtcb->header.fsf_status,
2769                                 sizeof (u32));
2770                 break;
2771         }
2772
2773  skip_fsfstatus:
2774         atomic_clear_mask(ZFCP_STATUS_COMMON_CLOSING, &port->status);
2775         return retval;
2776 }
2777
2778 /*
2779  * function:    zfcp_fsf_close_physical_port
2780  *
2781  * purpose:     submit FSF command "close physical port"
2782  *
2783  * returns:     address of initiated FSF request
2784  *              NULL - request could not be initiated
2785  */
2786 int
2787 zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action)
2788 {
2789         int retval = 0;
2790         unsigned long lock_flags;
2791         volatile struct qdio_buffer_element *sbale;
2792
2793         /* setup new FSF request */
2794         retval = zfcp_fsf_req_create(erp_action->adapter,
2795                                      FSF_QTCB_CLOSE_PHYSICAL_PORT,
2796                                      ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP,
2797                                      erp_action->adapter->pool.fsf_req_erp,
2798                                      &lock_flags, &erp_action->fsf_req);
2799         if (retval < 0) {
2800                 ZFCP_LOG_INFO("error: Could not create close physical port "
2801                               "request (adapter %s, port 0x%016Lx)\n",
2802                               zfcp_get_busid_by_adapter(erp_action->adapter),
2803                               erp_action->port->wwpn);
2804
2805                 goto out;
2806         }
2807
2808         sbale = zfcp_qdio_sbale_req(erp_action->fsf_req,
2809                                     erp_action->fsf_req->sbal_curr, 0);
2810         sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
2811         sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
2812
2813         /* mark port as being closed */
2814         atomic_set_mask(ZFCP_STATUS_PORT_PHYS_CLOSING,
2815                         &erp_action->port->status);
2816         /* save a pointer to this port */
2817         erp_action->fsf_req->data.close_physical_port.port = erp_action->port;
2818         /* port to be closeed */
2819         erp_action->fsf_req->qtcb->header.port_handle =
2820             erp_action->port->handle;
2821         erp_action->fsf_req->erp_action = erp_action;
2822
2823         /* start QDIO request for this FSF request */
2824         retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
2825         if (retval) {
2826                 ZFCP_LOG_INFO("error: Could not send close physical port "
2827                               "request (adapter %s, port 0x%016Lx)\n",
2828                               zfcp_get_busid_by_adapter(erp_action->adapter),
2829                               erp_action->port->wwpn);
2830                 zfcp_fsf_req_free(erp_action->fsf_req);
2831                 erp_action->fsf_req = NULL;
2832                 goto out;
2833         }
2834
2835         ZFCP_LOG_TRACE("close physical port request initiated "
2836                        "(adapter %s, port 0x%016Lx)\n",
2837                        zfcp_get_busid_by_adapter(erp_action->adapter),
2838                        erp_action->port->wwpn);
2839  out:
2840         write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock,
2841                                 lock_flags);
2842         return retval;
2843 }
2844
2845 /*
2846  * function:    zfcp_fsf_close_physical_port_handler
2847  *
2848  * purpose:     is called for finished Close Physical Port FSF command
2849  *
2850  * returns:
2851  */
2852 static int
2853 zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *fsf_req)
2854 {
2855         int retval = -EINVAL;
2856         struct zfcp_port *port;
2857         struct zfcp_unit *unit;
2858         struct fsf_qtcb_header *header;
2859         u16 subtable, rule, counter;
2860
2861         port = fsf_req->data.close_physical_port.port;
2862         header = &fsf_req->qtcb->header;
2863
2864         if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) {
2865                 /* don't change port status in our bookkeeping */
2866                 goto skip_fsfstatus;
2867         }
2868
2869         /* evaluate FSF status in QTCB */
2870         switch (header->fsf_status) {
2871
2872         case FSF_PORT_HANDLE_NOT_VALID:
2873                 ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n");
2874                 ZFCP_LOG_INFO("Temporary port identifier 0x%x invalid"
2875                               "(adapter %s, port 0x%016Lx). "
2876                               "This may happen occasionally.\n",
2877                               port->handle,
2878                               zfcp_get_busid_by_port(port),
2879                               port->wwpn);
2880                 ZFCP_LOG_DEBUG("status qualifier:\n");
2881                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
2882                               (char *) &header->fsf_status_qual,
2883                               sizeof (union fsf_status_qual));
2884                 debug_text_event(fsf_req->adapter->erp_dbf, 1,
2885                                  "fsf_s_phand_nv");
2886                 zfcp_erp_adapter_reopen(port->adapter, 0);
2887                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
2888                 break;
2889
2890         case FSF_ACCESS_DENIED:
2891                 ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n");
2892                 ZFCP_LOG_NORMAL("Access denied, cannot close "
2893                                 "physical port 0x%016Lx on adapter %s\n",
2894                                 port->wwpn, zfcp_get_busid_by_port(port));
2895                 for (counter = 0; counter < 2; counter++) {
2896                         subtable = header->fsf_status_qual.halfword[counter * 2];
2897                         rule = header->fsf_status_qual.halfword[counter * 2 + 1];
2898                         switch (subtable) {
2899                         case FSF_SQ_CFDC_SUBTABLE_OS:
2900                         case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN:
2901                         case FSF_SQ_CFDC_SUBTABLE_PORT_DID:
2902                         case FSF_SQ_CFDC_SUBTABLE_LUN:
2903                                 ZFCP_LOG_INFO("Access denied (%s rule %d)\n",
2904                                         zfcp_act_subtable_type[subtable], rule);
2905                                 break;
2906                         }
2907                 }
2908                 debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_access");
2909                 zfcp_erp_port_access_denied(port);
2910                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
2911                 break;
2912
2913         case FSF_PORT_BOXED:
2914                 ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n");
2915                 ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter "
2916                                "%s needs to be reopened but it was attempted "
2917                                "to close it physically.\n",
2918                                port->wwpn,
2919                                zfcp_get_busid_by_port(port));
2920                 debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_pboxed");
2921                 zfcp_erp_port_reopen(port, 0);
2922                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR |
2923                         ZFCP_STATUS_FSFREQ_RETRY;
2924                 break;
2925
2926         case FSF_ADAPTER_STATUS_AVAILABLE:
2927                 ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n");
2928                 switch (header->fsf_status_qual.word[0]) {
2929                 case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
2930                         ZFCP_LOG_FLAGS(2,
2931                                        "FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n");
2932                         debug_text_event(fsf_req->adapter->erp_dbf, 1,
2933                                          "fsf_sq_ltest");
2934                         /* This will now be escalated by ERP */
2935                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
2936                         break;
2937                 case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
2938                         ZFCP_LOG_FLAGS(2,
2939                                        "FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED\n");
2940                         /* ERP strategy will escalate */
2941                         debug_text_event(fsf_req->adapter->erp_dbf, 1,
2942                                          "fsf_sq_ulp");
2943                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
2944                         break;
2945                 default:
2946                         ZFCP_LOG_NORMAL
2947                             ("bug: Wrong status qualifier 0x%x arrived.\n",
2948                              header->fsf_status_qual.word[0]);
2949                         debug_text_event(fsf_req->adapter->erp_dbf, 0,
2950                                          "fsf_sq_inval:");
2951                         debug_exception(
2952                                 fsf_req->adapter->erp_dbf, 0,
2953                                 &header->fsf_status_qual.word[0], sizeof (u32));
2954                         break;
2955                 }
2956                 break;
2957
2958         case FSF_GOOD:
2959                 ZFCP_LOG_FLAGS(3, "FSF_GOOD\n");
2960                 ZFCP_LOG_DEBUG("Remote port 0x%016Lx via adapter %s "
2961                                "physically closed, port handle 0x%x\n",
2962                                port->wwpn,
2963                                zfcp_get_busid_by_port(port), port->handle);
2964                 /* can't use generic zfcp_erp_modify_port_status because
2965                  * ZFCP_STATUS_COMMON_OPEN must not be reset for the port
2966                  */
2967                 atomic_clear_mask(ZFCP_STATUS_PORT_PHYS_OPEN, &port->status);
2968                 list_for_each_entry(unit, &port->unit_list_head, list)
2969                     atomic_clear_mask(ZFCP_STATUS_COMMON_OPEN, &unit->status);
2970                 retval = 0;
2971                 break;
2972
2973         default:
2974                 ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented "
2975                                 "(debug info 0x%x)\n",
2976                                 header->fsf_status);
2977                 debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_s_inval:");
2978                 debug_exception(fsf_req->adapter->erp_dbf, 0,
2979                                 &header->fsf_status, sizeof (u32));
2980                 break;
2981         }
2982
2983  skip_fsfstatus:
2984         atomic_clear_mask(ZFCP_STATUS_PORT_PHYS_CLOSING, &port->status);
2985         return retval;
2986 }
2987
2988 /*
2989  * function:    zfcp_fsf_open_unit
2990  *
2991  * purpose:
2992  *
2993  * returns:
2994  *
2995  * assumptions: This routine does not check whether the associated
2996  *              remote port has already been opened. This should be
2997  *              done by calling routines. Otherwise some status
2998  *              may be presented by FSF
2999  */
3000 int
3001 zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action)
3002 {
3003         volatile struct qdio_buffer_element *sbale;
3004         unsigned long lock_flags;
3005         int retval = 0;
3006
3007         /* setup new FSF request */
3008         retval = zfcp_fsf_req_create(erp_action->adapter,
3009                                      FSF_QTCB_OPEN_LUN,
3010                                      ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP,
3011                                      erp_action->adapter->pool.fsf_req_erp,
3012                                      &lock_flags, &(erp_action->fsf_req));
3013         if (retval < 0) {
3014                 ZFCP_LOG_INFO("error: Could not create open unit request for "
3015                               "unit 0x%016Lx on port 0x%016Lx on adapter %s.\n",
3016                               erp_action->unit->fcp_lun,
3017                               erp_action->unit->port->wwpn,
3018                               zfcp_get_busid_by_adapter(erp_action->adapter));
3019                 goto out;
3020         }
3021
3022         sbale = zfcp_qdio_sbale_req(erp_action->fsf_req,
3023                                     erp_action->fsf_req->sbal_curr, 0);
3024         sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
3025         sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
3026
3027         erp_action->fsf_req->qtcb->header.port_handle =
3028                 erp_action->port->handle;
3029         erp_action->fsf_req->qtcb->bottom.support.fcp_lun =
3030                 erp_action->unit->fcp_lun;
3031         erp_action->fsf_req->qtcb->bottom.support.option =
3032                 FSF_OPEN_LUN_SUPPRESS_BOXING;
3033         atomic_set_mask(ZFCP_STATUS_COMMON_OPENING, &erp_action->unit->status);
3034         erp_action->fsf_req->data.open_unit.unit = erp_action->unit;
3035         erp_action->fsf_req->erp_action = erp_action;
3036
3037         /* start QDIO request for this FSF request */
3038         retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
3039         if (retval) {
3040                 ZFCP_LOG_INFO("error: Could not send an open unit request "
3041                               "on the adapter %s, port 0x%016Lx for "
3042                               "unit 0x%016Lx\n",
3043                               zfcp_get_busid_by_adapter(erp_action->adapter),
3044                               erp_action->port->wwpn,
3045                               erp_action->unit->fcp_lun);
3046                 zfcp_fsf_req_free(erp_action->fsf_req);
3047                 erp_action->fsf_req = NULL;
3048                 goto out;
3049         }
3050
3051         ZFCP_LOG_TRACE("Open LUN request initiated (adapter %s, "
3052                        "port 0x%016Lx, unit 0x%016Lx)\n",
3053                        zfcp_get_busid_by_adapter(erp_action->adapter),
3054                        erp_action->port->wwpn, erp_action->unit->fcp_lun);
3055  out:
3056         write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock,
3057                                 lock_flags);
3058         return retval;
3059 }
3060
3061 /*
3062  * function:    zfcp_fsf_open_unit_handler
3063  *
3064  * purpose:     is called for finished Open LUN command
3065  *
3066  * returns:
3067  */
3068 static int
3069 zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *fsf_req)
3070 {
3071         int retval = -EINVAL;
3072         struct zfcp_adapter *adapter;
3073         struct zfcp_unit *unit;
3074         struct fsf_qtcb_header *header;
3075         struct fsf_qtcb_bottom_support *bottom;
3076         struct fsf_queue_designator *queue_designator;
3077         u16 subtable, rule, counter;
3078         u32 allowed, exclusive, readwrite;
3079
3080         unit = fsf_req->data.open_unit.unit;
3081
3082         if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) {
3083                 /* don't change unit status in our bookkeeping */
3084                 goto skip_fsfstatus;
3085         }
3086
3087         adapter = fsf_req->adapter;
3088         header = &fsf_req->qtcb->header;
3089         bottom = &fsf_req->qtcb->bottom.support;
3090         queue_designator = &header->fsf_status_qual.fsf_queue_designator;
3091
3092         allowed   = bottom->lun_access_info & FSF_UNIT_ACCESS_OPEN_LUN_ALLOWED;
3093         exclusive = bottom->lun_access_info & FSF_UNIT_ACCESS_EXCLUSIVE;
3094         readwrite = bottom->lun_access_info & FSF_UNIT_ACCESS_OUTBOUND_TRANSFER;
3095
3096         atomic_clear_mask(ZFCP_STATUS_COMMON_ACCESS_DENIED |
3097                           ZFCP_STATUS_UNIT_SHARED |
3098                           ZFCP_STATUS_UNIT_READONLY,
3099                           &unit->status);
3100
3101         /* evaluate FSF status in QTCB */
3102         switch (header->fsf_status) {
3103
3104         case FSF_PORT_HANDLE_NOT_VALID:
3105                 ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n");
3106                 ZFCP_LOG_INFO("Temporary port identifier 0x%x "
3107                               "for port 0x%016Lx on adapter %s invalid "
3108                               "This may happen occasionally\n",
3109                               unit->port->handle,
3110                               unit->port->wwpn, zfcp_get_busid_by_unit(unit));
3111                 ZFCP_LOG_DEBUG("status qualifier:\n");
3112                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
3113                               (char *) &header->fsf_status_qual,
3114                               sizeof (union fsf_status_qual));
3115                 debug_text_event(adapter->erp_dbf, 1, "fsf_s_ph_nv");
3116                 zfcp_erp_adapter_reopen(unit->port->adapter, 0);
3117                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3118                 break;
3119
3120         case FSF_LUN_ALREADY_OPEN:
3121                 ZFCP_LOG_FLAGS(0, "FSF_LUN_ALREADY_OPEN\n");
3122                 ZFCP_LOG_NORMAL("bug: Attempted to open unit 0x%016Lx on "
3123                                 "remote port 0x%016Lx on adapter %s twice.\n",
3124                                 unit->fcp_lun,
3125                                 unit->port->wwpn, zfcp_get_busid_by_unit(unit));
3126                 debug_text_exception(adapter->erp_dbf, 0,
3127                                      "fsf_s_uopen");
3128                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3129                 break;
3130
3131         case FSF_ACCESS_DENIED:
3132                 ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n");
3133                 ZFCP_LOG_NORMAL("Access denied, cannot open unit 0x%016Lx on "
3134                                 "remote port 0x%016Lx on adapter %s\n",
3135                                 unit->fcp_lun, unit->port->wwpn,
3136                                 zfcp_get_busid_by_unit(unit));
3137                 for (counter = 0; counter < 2; counter++) {
3138                         subtable = header->fsf_status_qual.halfword[counter * 2];
3139                         rule = header->fsf_status_qual.halfword[counter * 2 + 1];
3140                         switch (subtable) {
3141                         case FSF_SQ_CFDC_SUBTABLE_OS:
3142                         case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN:
3143                         case FSF_SQ_CFDC_SUBTABLE_PORT_DID:
3144                         case FSF_SQ_CFDC_SUBTABLE_LUN:
3145                                 ZFCP_LOG_INFO("Access denied (%s rule %d)\n",
3146                                         zfcp_act_subtable_type[subtable], rule);
3147                                 break;
3148                         }
3149                 }
3150                 debug_text_event(adapter->erp_dbf, 1, "fsf_s_access");
3151                 zfcp_erp_unit_access_denied(unit);
3152                 atomic_clear_mask(ZFCP_STATUS_UNIT_SHARED, &unit->status);
3153                 atomic_clear_mask(ZFCP_STATUS_UNIT_READONLY, &unit->status);
3154                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3155                 break;
3156
3157         case FSF_PORT_BOXED:
3158                 ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n");
3159                 ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter %s "
3160                                "needs to be reopened\n",
3161                                unit->port->wwpn, zfcp_get_busid_by_unit(unit));
3162                 debug_text_event(adapter->erp_dbf, 2, "fsf_s_pboxed");
3163                 zfcp_erp_port_reopen(unit->port, 0);
3164                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR |
3165                         ZFCP_STATUS_FSFREQ_RETRY;
3166                 break;
3167
3168         case FSF_LUN_SHARING_VIOLATION:
3169                 ZFCP_LOG_FLAGS(2, "FSF_LUN_SHARING_VIOLATION\n");
3170                 if (header->fsf_status_qual.word[0] != 0) {
3171                         ZFCP_LOG_NORMAL("FCP-LUN 0x%Lx at the remote port "
3172                                         "with WWPN 0x%Lx "
3173                                         "connected to the adapter %s "
3174                                         "is already in use in LPAR%d, CSS%d\n",
3175                                         unit->fcp_lun,
3176                                         unit->port->wwpn,
3177                                         zfcp_get_busid_by_unit(unit),
3178                                         queue_designator->hla,
3179                                         queue_designator->cssid);
3180                 } else {
3181                         subtable = header->fsf_status_qual.halfword[4];
3182                         rule = header->fsf_status_qual.halfword[5];
3183                         switch (subtable) {
3184                         case FSF_SQ_CFDC_SUBTABLE_OS:
3185                         case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN:
3186                         case FSF_SQ_CFDC_SUBTABLE_PORT_DID:
3187                         case FSF_SQ_CFDC_SUBTABLE_LUN:
3188                                 ZFCP_LOG_NORMAL("Access to FCP-LUN 0x%Lx at the "
3189                                                 "remote port with WWPN 0x%Lx "
3190                                                 "connected to the adapter %s "
3191                                                 "is denied (%s rule %d)\n",
3192                                                 unit->fcp_lun,
3193                                                 unit->port->wwpn,
3194                                                 zfcp_get_busid_by_unit(unit),
3195                                                 zfcp_act_subtable_type[subtable],
3196                                                 rule);
3197                                 break;
3198                         }
3199                 }
3200                 ZFCP_LOG_DEBUG("status qualifier:\n");
3201                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
3202                               (char *) &header->fsf_status_qual,
3203                               sizeof (union fsf_status_qual));
3204                 debug_text_event(adapter->erp_dbf, 2,
3205                                  "fsf_s_l_sh_vio");
3206                 zfcp_erp_unit_access_denied(unit);
3207                 atomic_clear_mask(ZFCP_STATUS_UNIT_SHARED, &unit->status);
3208                 atomic_clear_mask(ZFCP_STATUS_UNIT_READONLY, &unit->status);
3209                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3210                 break;
3211
3212         case FSF_MAXIMUM_NUMBER_OF_LUNS_EXCEEDED:
3213                 ZFCP_LOG_FLAGS(1, "FSF_MAXIMUM_NUMBER_OF_LUNS_EXCEEDED\n");
3214                 ZFCP_LOG_INFO("error: The adapter ran out of resources. "
3215                               "There is no handle (temporary port identifier) "
3216                               "available for unit 0x%016Lx on port 0x%016Lx "
3217                               "on adapter %s\n",
3218                               unit->fcp_lun,
3219                               unit->port->wwpn,
3220                               zfcp_get_busid_by_unit(unit));
3221                 debug_text_event(adapter->erp_dbf, 1,
3222                                  "fsf_s_max_units");
3223                 zfcp_erp_unit_failed(unit);
3224                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3225                 break;
3226
3227         case FSF_ADAPTER_STATUS_AVAILABLE:
3228                 ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n");
3229                 switch (header->fsf_status_qual.word[0]) {
3230                 case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
3231                         ZFCP_LOG_FLAGS(2,
3232                                        "FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n");
3233                         /* Re-establish link to port */
3234                         debug_text_event(adapter->erp_dbf, 1,
3235                                          "fsf_sq_ltest");
3236                         zfcp_erp_port_reopen(unit->port, 0);
3237                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3238                         break;
3239                 case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
3240                         ZFCP_LOG_FLAGS(2,
3241                                        "FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED\n");
3242                         /* ERP strategy will escalate */
3243                         debug_text_event(adapter->erp_dbf, 1,
3244                                          "fsf_sq_ulp");
3245                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3246                         break;
3247                 default:
3248                         ZFCP_LOG_NORMAL
3249                             ("bug: Wrong status qualifier 0x%x arrived.\n",
3250                              header->fsf_status_qual.word[0]);
3251                         debug_text_event(adapter->erp_dbf, 0,
3252                                          "fsf_sq_inval:");
3253                         debug_exception(adapter->erp_dbf, 0,
3254                                         &header->fsf_status_qual.word[0],
3255                                 sizeof (u32));
3256                 }
3257                 break;
3258
3259         case FSF_INVALID_COMMAND_OPTION:
3260                 ZFCP_LOG_FLAGS(2, "FSF_INVALID_COMMAND_OPTION\n");
3261                 ZFCP_LOG_NORMAL(
3262                         "Invalid option 0x%x has been specified "
3263                         "in QTCB bottom sent to the adapter %s\n",
3264                         bottom->option,
3265                         zfcp_get_busid_by_adapter(adapter));
3266                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3267                 retval = -EINVAL;
3268                 break;
3269
3270         case FSF_GOOD:
3271                 ZFCP_LOG_FLAGS(3, "FSF_GOOD\n");
3272                 /* save LUN handle assigned by FSF */
3273                 unit->handle = header->lun_handle;
3274                 ZFCP_LOG_TRACE("unit 0x%016Lx on remote port 0x%016Lx on "
3275                                "adapter %s opened, port handle 0x%x\n",
3276                                unit->fcp_lun,
3277                                unit->port->wwpn,
3278                                zfcp_get_busid_by_unit(unit),
3279                                unit->handle);
3280                 /* mark unit as open */
3281                 atomic_set_mask(ZFCP_STATUS_COMMON_OPEN, &unit->status);
3282
3283                 if (adapter->supported_features & FSF_FEATURE_LUN_SHARING){
3284                         if (!exclusive)
3285                                 atomic_set_mask(ZFCP_STATUS_UNIT_SHARED,
3286                                                 &unit->status);
3287
3288                         if (!readwrite) {
3289                                 atomic_set_mask(ZFCP_STATUS_UNIT_READONLY,
3290                                                 &unit->status);
3291                                 ZFCP_LOG_NORMAL("read-only access for unit "
3292                                                 "(adapter %s, wwpn=0x%016Lx, "
3293                                                 "fcp_lun=0x%016Lx)\n",
3294                                                 zfcp_get_busid_by_unit(unit),
3295                                                 unit->port->wwpn,
3296                                                 unit->fcp_lun);
3297                         }
3298
3299                         if (exclusive && !readwrite) {
3300                                 ZFCP_LOG_NORMAL("exclusive access of read-only "
3301                                                 "unit not supported\n");
3302                                 zfcp_erp_unit_failed(unit);
3303                                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3304                                 zfcp_erp_unit_shutdown(unit, 0);
3305                         } else if (!exclusive && readwrite) {
3306                                 ZFCP_LOG_NORMAL("shared access of read-write "
3307                                                 "unit not supported\n");
3308                                 zfcp_erp_unit_failed(unit);
3309                                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3310                                 zfcp_erp_unit_shutdown(unit, 0);
3311                         }
3312                 }
3313
3314                 retval = 0;
3315                 break;
3316
3317         default:
3318                 ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented "
3319                                 "(debug info 0x%x)\n",
3320                                 header->fsf_status);
3321                 debug_text_event(adapter->erp_dbf, 0, "fsf_s_inval:");
3322                 debug_exception(adapter->erp_dbf, 0,
3323                                 &header->fsf_status, sizeof (u32));
3324                 break;
3325         }
3326
3327  skip_fsfstatus:
3328         atomic_clear_mask(ZFCP_STATUS_COMMON_OPENING, &unit->status);
3329         return retval;
3330 }
3331
3332 /*
3333  * function:    zfcp_fsf_close_unit
3334  *
3335  * purpose:
3336  *
3337  * returns:     address of fsf_req - request successfully initiated
3338  *              NULL -
3339  *
3340  * assumptions: This routine does not check whether the associated
3341  *              remote port/lun has already been opened. This should be
3342  *              done by calling routines. Otherwise some status
3343  *              may be presented by FSF
3344  */
3345 int
3346 zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action)
3347 {
3348         volatile struct qdio_buffer_element *sbale;
3349         unsigned long lock_flags;
3350         int retval = 0;
3351
3352         /* setup new FSF request */
3353         retval = zfcp_fsf_req_create(erp_action->adapter,
3354                                      FSF_QTCB_CLOSE_LUN,
3355                                      ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP,
3356                                      erp_action->adapter->pool.fsf_req_erp,
3357                                      &lock_flags, &(erp_action->fsf_req));
3358         if (retval < 0) {
3359                 ZFCP_LOG_INFO("error: Could not create close unit request for "
3360                               "unit 0x%016Lx on port 0x%016Lx on adapter %s.\n",
3361                               erp_action->unit->fcp_lun,
3362                               erp_action->port->wwpn,
3363                               zfcp_get_busid_by_adapter(erp_action->adapter));
3364                 goto out;
3365         }
3366
3367         sbale = zfcp_qdio_sbale_req(erp_action->fsf_req,
3368                                     erp_action->fsf_req->sbal_curr, 0);
3369         sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
3370         sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
3371
3372         erp_action->fsf_req->qtcb->header.port_handle =
3373             erp_action->port->handle;
3374         erp_action->fsf_req->qtcb->header.lun_handle = erp_action->unit->handle;
3375         atomic_set_mask(ZFCP_STATUS_COMMON_CLOSING, &erp_action->unit->status);
3376         erp_action->fsf_req->data.close_unit.unit = erp_action->unit;
3377         erp_action->fsf_req->erp_action = erp_action;
3378
3379         /* start QDIO request for this FSF request */
3380         retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
3381         if (retval) {
3382                 ZFCP_LOG_INFO("error: Could not send a close unit request for "
3383                               "unit 0x%016Lx on port 0x%016Lx onadapter %s.\n",
3384                               erp_action->unit->fcp_lun,
3385                               erp_action->port->wwpn,
3386                               zfcp_get_busid_by_adapter(erp_action->adapter));
3387                 zfcp_fsf_req_free(erp_action->fsf_req);
3388                 erp_action->fsf_req = NULL;
3389                 goto out;
3390         }
3391
3392         ZFCP_LOG_TRACE("Close LUN request initiated (adapter %s, "
3393                        "port 0x%016Lx, unit 0x%016Lx)\n",
3394                        zfcp_get_busid_by_adapter(erp_action->adapter),
3395                        erp_action->port->wwpn, erp_action->unit->fcp_lun);
3396  out:
3397         write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock,
3398                                 lock_flags);
3399         return retval;
3400 }
3401
3402 /*
3403  * function:    zfcp_fsf_close_unit_handler
3404  *
3405  * purpose:     is called for finished Close LUN FSF command
3406  *
3407  * returns:
3408  */
3409 static int
3410 zfcp_fsf_close_unit_handler(struct zfcp_fsf_req *fsf_req)
3411 {
3412         int retval = -EINVAL;
3413         struct zfcp_unit *unit;
3414
3415         unit = fsf_req->data.close_unit.unit;   /* restore unit */
3416
3417         if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) {
3418                 /* don't change unit status in our bookkeeping */
3419                 goto skip_fsfstatus;
3420         }
3421
3422         /* evaluate FSF status in QTCB */
3423         switch (fsf_req->qtcb->header.fsf_status) {
3424
3425         case FSF_PORT_HANDLE_NOT_VALID:
3426                 ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n");
3427                 ZFCP_LOG_INFO("Temporary port identifier 0x%x for port "
3428                               "0x%016Lx on adapter %s invalid. This may "
3429                               "happen in rare circumstances\n",
3430                               unit->port->handle,
3431                               unit->port->wwpn,
3432                               zfcp_get_busid_by_unit(unit));
3433                 ZFCP_LOG_DEBUG("status qualifier:\n");
3434                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
3435                               (char *) &fsf_req->qtcb->header.fsf_status_qual,
3436                               sizeof (union fsf_status_qual));
3437                 debug_text_event(fsf_req->adapter->erp_dbf, 1,
3438                                  "fsf_s_phand_nv");
3439                 zfcp_erp_adapter_reopen(unit->port->adapter, 0);
3440                 zfcp_cmd_dbf_event_fsf("porthinv", fsf_req,
3441                                        &fsf_req->qtcb->header.fsf_status_qual,
3442                                        sizeof (union fsf_status_qual));
3443                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3444                 break;
3445
3446         case FSF_LUN_HANDLE_NOT_VALID:
3447                 ZFCP_LOG_FLAGS(1, "FSF_LUN_HANDLE_NOT_VALID\n");
3448                 ZFCP_LOG_INFO("Temporary LUN identifier 0x%x of unit "
3449                               "0x%016Lx on port 0x%016Lx on adapter %s is "
3450                               "invalid. This may happen occasionally.\n",
3451                               unit->handle,
3452                               unit->fcp_lun,
3453                               unit->port->wwpn,
3454                               zfcp_get_busid_by_unit(unit));
3455                 ZFCP_LOG_DEBUG("Status qualifier data:\n");
3456                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
3457                               (char *) &fsf_req->qtcb->header.fsf_status_qual,
3458                               sizeof (union fsf_status_qual));
3459                 debug_text_event(fsf_req->adapter->erp_dbf, 1,
3460                                  "fsf_s_lhand_nv");
3461                 zfcp_erp_port_reopen(unit->port, 0);
3462                 zfcp_cmd_dbf_event_fsf("lunhinv", fsf_req,
3463                                        &fsf_req->qtcb->header.fsf_status_qual,
3464                                        sizeof (union fsf_status_qual));
3465                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3466                 break;
3467
3468         case FSF_PORT_BOXED:
3469                 ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n");
3470                 ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter %s "
3471                                "needs to be reopened\n",
3472                                unit->port->wwpn,
3473                                zfcp_get_busid_by_unit(unit));
3474                 debug_text_event(fsf_req->adapter->erp_dbf, 2, "fsf_s_pboxed");
3475                 zfcp_erp_port_reopen(unit->port, 0);
3476                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR |
3477                         ZFCP_STATUS_FSFREQ_RETRY;
3478                 break;
3479
3480         case FSF_ADAPTER_STATUS_AVAILABLE:
3481                 ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n");
3482                 switch (fsf_req->qtcb->header.fsf_status_qual.word[0]) {
3483                 case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
3484                         ZFCP_LOG_FLAGS(2,
3485                                        "FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n");
3486                         /* re-establish link to port */
3487                         debug_text_event(fsf_req->adapter->erp_dbf, 1,
3488                                          "fsf_sq_ltest");
3489                         zfcp_erp_port_reopen(unit->port, 0);
3490                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3491                         break;
3492                 case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
3493                         ZFCP_LOG_FLAGS(2,
3494                                        "FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED\n");
3495                         /* ERP strategy will escalate */
3496                         debug_text_event(fsf_req->adapter->erp_dbf, 1,
3497                                          "fsf_sq_ulp");
3498                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3499                         break;
3500                 default:
3501                         ZFCP_LOG_NORMAL
3502                             ("bug: Wrong status qualifier 0x%x arrived.\n",
3503                              fsf_req->qtcb->header.fsf_status_qual.word[0]);
3504                         debug_text_event(fsf_req->adapter->erp_dbf, 0,
3505                                          "fsf_sq_inval:");
3506                         debug_exception(
3507                                 fsf_req->adapter->erp_dbf, 0,
3508                                 &fsf_req->qtcb->header.fsf_status_qual.word[0],
3509                                 sizeof (u32));
3510                         break;
3511                 }
3512                 break;
3513
3514         case FSF_GOOD:
3515                 ZFCP_LOG_FLAGS(3, "FSF_GOOD\n");
3516                 ZFCP_LOG_TRACE("unit 0x%016Lx on port 0x%016Lx on adapter %s "
3517                                "closed, port handle 0x%x\n",
3518                                unit->fcp_lun,
3519                                unit->port->wwpn,
3520                                zfcp_get_busid_by_unit(unit),
3521                                unit->handle);
3522                 /* mark unit as closed */
3523                 atomic_clear_mask(ZFCP_STATUS_COMMON_OPEN, &unit->status);
3524                 retval = 0;
3525                 break;
3526
3527         default:
3528                 ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented "
3529                                 "(debug info 0x%x)\n",
3530                                 fsf_req->qtcb->header.fsf_status);
3531                 debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_s_inval:");
3532                 debug_exception(fsf_req->adapter->erp_dbf, 0,
3533                                 &fsf_req->qtcb->header.fsf_status,
3534                                 sizeof (u32));
3535                 break;
3536         }
3537
3538  skip_fsfstatus:
3539         atomic_clear_mask(ZFCP_STATUS_COMMON_CLOSING, &unit->status);
3540         return retval;
3541 }
3542
3543 /**
3544  * zfcp_fsf_send_fcp_command_task - initiate an FCP command (for a SCSI command)
3545  * @adapter: adapter where scsi command is issued
3546  * @unit: unit where command is sent to
3547  * @scsi_cmnd: scsi command to be sent
3548  * @timer: timer to be started when request is initiated
3549  * @req_flags: flags for fsf_request
3550  */
3551 int
3552 zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter,
3553                                struct zfcp_unit *unit,
3554                                struct scsi_cmnd * scsi_cmnd,
3555                                struct timer_list *timer, int req_flags)
3556 {
3557         struct zfcp_fsf_req *fsf_req = NULL;
3558         struct fcp_cmnd_iu *fcp_cmnd_iu;
3559         unsigned int sbtype;
3560         unsigned long lock_flags;
3561         int real_bytes = 0;
3562         int retval = 0;
3563         int mask;
3564
3565         /* setup new FSF request */
3566         retval = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
3567                                      adapter->pool.fsf_req_scsi,
3568                                      &lock_flags, &fsf_req);
3569         if (unlikely(retval < 0)) {
3570                 ZFCP_LOG_DEBUG("error: Could not create FCP command request "
3571                                "for unit 0x%016Lx on port 0x%016Lx on "
3572                                "adapter %s\n",
3573                                unit->fcp_lun,
3574                                unit->port->wwpn,
3575                                zfcp_get_busid_by_adapter(adapter));
3576                 goto failed_req_create;
3577         }
3578
3579         /*
3580          * associate FSF request with SCSI request
3581          * (need this for look up on abort)
3582          */
3583         fsf_req->data.send_fcp_command_task.fsf_req = fsf_req;
3584         scsi_cmnd->host_scribble = (char *) &(fsf_req->data);
3585
3586         /*
3587          * associate SCSI command with FSF request
3588          * (need this for look up on normal command completion)
3589          */
3590         fsf_req->data.send_fcp_command_task.scsi_cmnd = scsi_cmnd;
3591         fsf_req->data.send_fcp_command_task.start_jiffies = jiffies;
3592         fsf_req->data.send_fcp_command_task.unit = unit;
3593         ZFCP_LOG_DEBUG("unit=%p, fcp_lun=0x%016Lx\n", unit, unit->fcp_lun);
3594
3595         /* set handles of unit and its parent port in QTCB */
3596         fsf_req->qtcb->header.lun_handle = unit->handle;
3597         fsf_req->qtcb->header.port_handle = unit->port->handle;
3598
3599         /* FSF does not define the structure of the FCP_CMND IU */
3600         fcp_cmnd_iu = (struct fcp_cmnd_iu *)
3601             &(fsf_req->qtcb->bottom.io.fcp_cmnd);
3602
3603         /*
3604          * set depending on data direction:
3605          *      data direction bits in SBALE (SB Type)
3606          *      data direction bits in QTCB
3607          *      data direction bits in FCP_CMND IU
3608          */
3609         switch (scsi_cmnd->sc_data_direction) {
3610         case DMA_NONE:
3611                 ZFCP_LOG_FLAGS(3, "DMA_NONE\n");
3612                 fsf_req->qtcb->bottom.io.data_direction = FSF_DATADIR_CMND;
3613                 /*
3614                  * FIXME(qdio):
3615                  * what is the correct type for commands
3616                  * without 'real' data buffers?
3617                  */
3618                 sbtype = SBAL_FLAGS0_TYPE_READ;
3619                 break;
3620         case DMA_FROM_DEVICE:
3621                 ZFCP_LOG_FLAGS(3, "DMA_FROM_DEVICE\n");
3622                 fsf_req->qtcb->bottom.io.data_direction = FSF_DATADIR_READ;
3623                 sbtype = SBAL_FLAGS0_TYPE_READ;
3624                 fcp_cmnd_iu->rddata = 1;
3625                 break;
3626         case DMA_TO_DEVICE:
3627                 ZFCP_LOG_FLAGS(3, "DMA_TO_DEVICE\n");
3628                 fsf_req->qtcb->bottom.io.data_direction = FSF_DATADIR_WRITE;
3629                 sbtype = SBAL_FLAGS0_TYPE_WRITE;
3630                 fcp_cmnd_iu->wddata = 1;
3631                 break;
3632         case DMA_BIDIRECTIONAL:
3633                 ZFCP_LOG_FLAGS(0, "DMA_BIDIRECTIONAL not supported\n");
3634         default:
3635                 /*
3636                  * dummy, catch this condition earlier
3637                  * in zfcp_scsi_queuecommand
3638                  */
3639                 goto failed_scsi_cmnd;
3640         }
3641
3642         /* set FC service class in QTCB (3 per default) */
3643         fsf_req->qtcb->bottom.io.service_class = adapter->fc_service_class;
3644
3645         /* set FCP_LUN in FCP_CMND IU in QTCB */
3646         fcp_cmnd_iu->fcp_lun = unit->fcp_lun;
3647
3648         mask = ZFCP_STATUS_UNIT_READONLY | ZFCP_STATUS_UNIT_SHARED;
3649
3650         /* set task attributes in FCP_CMND IU in QTCB */
3651         if (likely((scsi_cmnd->device->simple_tags) ||
3652                    (atomic_test_mask(mask, &unit->status))))
3653                 fcp_cmnd_iu->task_attribute = SIMPLE_Q;
3654         else
3655                 fcp_cmnd_iu->task_attribute = UNTAGGED;
3656
3657         /* set additional length of FCP_CDB in FCP_CMND IU in QTCB, if needed */
3658         if (unlikely(scsi_cmnd->cmd_len > FCP_CDB_LENGTH)) {
3659                 fcp_cmnd_iu->add_fcp_cdb_length
3660                     = (scsi_cmnd->cmd_len - FCP_CDB_LENGTH) >> 2;
3661                 ZFCP_LOG_TRACE("SCSI CDB length is 0x%x, "
3662                                "additional FCP_CDB length is 0x%x "
3663                                "(shifted right 2 bits)\n",
3664                                scsi_cmnd->cmd_len,
3665                                fcp_cmnd_iu->add_fcp_cdb_length);
3666         }
3667         /*
3668          * copy SCSI CDB (including additional length, if any) to
3669          * FCP_CDB in FCP_CMND IU in QTCB
3670          */
3671         memcpy(fcp_cmnd_iu->fcp_cdb, scsi_cmnd->cmnd, scsi_cmnd->cmd_len);
3672
3673         /* FCP CMND IU length in QTCB */
3674         fsf_req->qtcb->bottom.io.fcp_cmnd_length =
3675                 sizeof (struct fcp_cmnd_iu) +
3676                 fcp_cmnd_iu->add_fcp_cdb_length + sizeof (fcp_dl_t);
3677
3678         /* generate SBALEs from data buffer */
3679         real_bytes = zfcp_qdio_sbals_from_scsicmnd(fsf_req, sbtype, scsi_cmnd);
3680         if (unlikely(real_bytes < 0)) {
3681                 if (fsf_req->sbal_number < ZFCP_MAX_SBALS_PER_REQ) {
3682                         ZFCP_LOG_DEBUG(
3683                                 "Data did not fit into available buffer(s), "
3684                                "waiting for more...\n");
3685                 retval = -EIO;
3686         } else {
3687                 ZFCP_LOG_NORMAL("error: No truncation implemented but "
3688                                 "required. Shutting down unit "
3689                                 "(adapter %s, port 0x%016Lx, "
3690                                 "unit 0x%016Lx)\n",
3691                                 zfcp_get_busid_by_unit(unit),
3692                                 unit->port->wwpn,
3693                                 unit->fcp_lun);
3694                 zfcp_erp_unit_shutdown(unit, 0);
3695                 retval = -EINVAL;
3696                 }
3697                 goto no_fit;
3698         }
3699
3700         /* set length of FCP data length in FCP_CMND IU in QTCB */
3701         zfcp_set_fcp_dl(fcp_cmnd_iu, real_bytes);
3702
3703         ZFCP_LOG_DEBUG("Sending SCSI command:\n");
3704         ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
3705                       (char *) scsi_cmnd->cmnd, scsi_cmnd->cmd_len);
3706
3707         /*
3708          * start QDIO request for this FSF request
3709          *  covered by an SBALE)
3710          */
3711         retval = zfcp_fsf_req_send(fsf_req, timer);
3712         if (unlikely(retval < 0)) {
3713                 ZFCP_LOG_INFO("error: Could not send FCP command request "
3714                               "on adapter %s, port 0x%016Lx, unit 0x%016Lx\n",
3715                               zfcp_get_busid_by_adapter(adapter),
3716                               unit->port->wwpn,
3717                               unit->fcp_lun);
3718                 goto send_failed;
3719         }
3720
3721         ZFCP_LOG_TRACE("Send FCP Command initiated (adapter %s, "
3722                        "port 0x%016Lx, unit 0x%016Lx)\n",
3723                        zfcp_get_busid_by_adapter(adapter),
3724                        unit->port->wwpn,
3725                        unit->fcp_lun);
3726         goto success;
3727
3728  send_failed:
3729  no_fit:
3730  failed_scsi_cmnd:
3731         zfcp_fsf_req_free(fsf_req);
3732         fsf_req = NULL;
3733         scsi_cmnd->host_scribble = NULL;
3734  success:
3735  failed_req_create:
3736         write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags);
3737         return retval;
3738 }
3739
3740 /*
3741  * function:    zfcp_fsf_send_fcp_command_task_management
3742  *
3743  * purpose:
3744  *
3745  * returns:
3746  *
3747  * FIXME(design): should be watched by a timeout!!!
3748  * FIXME(design) shouldn't this be modified to return an int
3749  *               also...don't know how though
3750  *
3751  */
3752 struct zfcp_fsf_req *
3753 zfcp_fsf_send_fcp_command_task_management(struct zfcp_adapter *adapter,
3754                                           struct zfcp_unit *unit,
3755                                           u8 tm_flags, int req_flags)
3756 {
3757         struct zfcp_fsf_req *fsf_req = NULL;
3758         int retval = 0;
3759         struct fcp_cmnd_iu *fcp_cmnd_iu;
3760         unsigned long lock_flags;
3761         volatile struct qdio_buffer_element *sbale;
3762
3763         /* setup new FSF request */
3764         retval = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
3765                                      adapter->pool.fsf_req_scsi,
3766                                      &lock_flags, &fsf_req);
3767         if (retval < 0) {
3768                 ZFCP_LOG_INFO("error: Could not create FCP command (task "
3769                               "management) request for adapter %s, port "
3770                               " 0x%016Lx, unit 0x%016Lx.\n",
3771                               zfcp_get_busid_by_adapter(adapter),
3772                               unit->port->wwpn, unit->fcp_lun);
3773                 goto out;
3774         }
3775
3776         /*
3777          * Used to decide on proper handler in the return path,
3778          * could be either zfcp_fsf_send_fcp_command_task_handler or
3779          * zfcp_fsf_send_fcp_command_task_management_handler */
3780
3781         fsf_req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT;
3782
3783         /*
3784          * hold a pointer to the unit being target of this
3785          * task management request
3786          */
3787         fsf_req->data.send_fcp_command_task_management.unit = unit;
3788
3789         /* set FSF related fields in QTCB */
3790         fsf_req->qtcb->header.lun_handle = unit->handle;
3791         fsf_req->qtcb->header.port_handle = unit->port->handle;
3792         fsf_req->qtcb->bottom.io.data_direction = FSF_DATADIR_CMND;
3793         fsf_req->qtcb->bottom.io.service_class = adapter->fc_service_class;
3794         fsf_req->qtcb->bottom.io.fcp_cmnd_length =
3795                 sizeof (struct fcp_cmnd_iu) + sizeof (fcp_dl_t);
3796
3797         sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
3798         sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE;
3799         sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
3800
3801         /* set FCP related fields in FCP_CMND IU in QTCB */
3802         fcp_cmnd_iu = (struct fcp_cmnd_iu *)
3803                 &(fsf_req->qtcb->bottom.io.fcp_cmnd);
3804         fcp_cmnd_iu->fcp_lun = unit->fcp_lun;
3805         fcp_cmnd_iu->task_management_flags = tm_flags;
3806
3807         /* start QDIO request for this FSF request */
3808         zfcp_fsf_start_scsi_er_timer(adapter);
3809         retval = zfcp_fsf_req_send(fsf_req, NULL);
3810         if (retval) {
3811                 del_timer(&adapter->scsi_er_timer);
3812                 ZFCP_LOG_INFO("error: Could not send an FCP-command (task "
3813                               "management) on adapter %s, port 0x%016Lx for "
3814                               "unit LUN 0x%016Lx\n",
3815                               zfcp_get_busid_by_adapter(adapter),
3816                               unit->port->wwpn,
3817                               unit->fcp_lun);
3818                 zfcp_fsf_req_free(fsf_req);
3819                 fsf_req = NULL;
3820                 goto out;
3821         }
3822
3823         ZFCP_LOG_TRACE("Send FCP Command (task management function) initiated "
3824                        "(adapter %s, port 0x%016Lx, unit 0x%016Lx, "
3825                        "tm_flags=0x%x)\n",
3826                        zfcp_get_busid_by_adapter(adapter),
3827                        unit->port->wwpn,
3828                        unit->fcp_lun,
3829                        tm_flags);
3830  out:
3831         write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags);
3832         return fsf_req;
3833 }
3834
3835 /*
3836  * function:    zfcp_fsf_send_fcp_command_handler
3837  *
3838  * purpose:     is called for finished Send FCP Command
3839  *
3840  * returns:
3841  */
3842 static int
3843 zfcp_fsf_send_fcp_command_handler(struct zfcp_fsf_req *fsf_req)
3844 {
3845         int retval = -EINVAL;
3846         struct zfcp_unit *unit;
3847         struct fsf_qtcb_header *header;
3848         u16 subtable, rule, counter;
3849
3850         header = &fsf_req->qtcb->header;
3851
3852         if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT))
3853                 unit = fsf_req->data.send_fcp_command_task_management.unit;
3854         else
3855                 unit = fsf_req->data.send_fcp_command_task.unit;
3856
3857         if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)) {
3858                 /* go directly to calls of special handlers */
3859                 goto skip_fsfstatus;
3860         }
3861
3862         /* evaluate FSF status in QTCB */
3863         switch (header->fsf_status) {
3864
3865         case FSF_PORT_HANDLE_NOT_VALID:
3866                 ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n");
3867                 ZFCP_LOG_INFO("Temporary port identifier 0x%x for port "
3868                               "0x%016Lx on adapter %s invalid\n",
3869                               unit->port->handle,
3870                               unit->port->wwpn, zfcp_get_busid_by_unit(unit));
3871                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
3872                               (char *) &header->fsf_status_qual,
3873                               sizeof (union fsf_status_qual));
3874                 debug_text_event(fsf_req->adapter->erp_dbf, 1,
3875                                  "fsf_s_phand_nv");
3876                 zfcp_erp_adapter_reopen(unit->port->adapter, 0);
3877                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3878                 break;
3879
3880         case FSF_LUN_HANDLE_NOT_VALID:
3881                 ZFCP_LOG_FLAGS(1, "FSF_LUN_HANDLE_NOT_VALID\n");
3882                 ZFCP_LOG_INFO("Temporary LUN identifier 0x%x for unit "
3883                               "0x%016Lx on port 0x%016Lx on adapter %s is "
3884                               "invalid. This may happen occasionally.\n",
3885                               unit->handle,
3886                               unit->fcp_lun,
3887                               unit->port->wwpn,
3888                               zfcp_get_busid_by_unit(unit));
3889                 ZFCP_LOG_NORMAL("Status qualifier data:\n");
3890                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL,
3891                               (char *) &header->fsf_status_qual,
3892                               sizeof (union fsf_status_qual));
3893                 debug_text_event(fsf_req->adapter->erp_dbf, 1,
3894                                  "fsf_s_uhand_nv");
3895                 zfcp_erp_port_reopen(unit->port, 0);
3896                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3897                 break;
3898
3899         case FSF_HANDLE_MISMATCH:
3900                 ZFCP_LOG_FLAGS(0, "FSF_HANDLE_MISMATCH\n");
3901                 ZFCP_LOG_NORMAL("bug: The port handle 0x%x has changed "
3902                                 "unexpectedly. (adapter %s, port 0x%016Lx, "
3903                                 "unit 0x%016Lx)\n",
3904                                 unit->port->handle,
3905                                 zfcp_get_busid_by_unit(unit),
3906                                 unit->port->wwpn,
3907                                 unit->fcp_lun);
3908                 ZFCP_LOG_NORMAL("status qualifier:\n");
3909                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL,
3910                               (char *) &header->fsf_status_qual,
3911                               sizeof (union fsf_status_qual));
3912                 debug_text_event(fsf_req->adapter->erp_dbf, 1,
3913                                  "fsf_s_hand_mis");
3914                 zfcp_erp_adapter_reopen(unit->port->adapter, 0);
3915                 zfcp_cmd_dbf_event_fsf("handmism",
3916                                        fsf_req,
3917                                        &header->fsf_status_qual,
3918                                        sizeof (union fsf_status_qual));
3919                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3920                 break;
3921
3922         case FSF_SERVICE_CLASS_NOT_SUPPORTED:
3923                 ZFCP_LOG_FLAGS(0, "FSF_SERVICE_CLASS_NOT_SUPPORTED\n");
3924                 if (fsf_req->adapter->fc_service_class <= 3) {
3925                         ZFCP_LOG_NORMAL("error: The adapter %s does "
3926                                         "not support fibrechannel class %d.\n",
3927                                         zfcp_get_busid_by_unit(unit),
3928                                         fsf_req->adapter->fc_service_class);
3929                 } else {
3930                         ZFCP_LOG_NORMAL("bug: The fibrechannel class at "
3931                                         "adapter %s is invalid. "
3932                                         "(debug info %d)\n",
3933                                         zfcp_get_busid_by_unit(unit),
3934                                         fsf_req->adapter->fc_service_class);
3935                 }
3936                 /* stop operation for this adapter */
3937                 debug_text_exception(fsf_req->adapter->erp_dbf, 0,
3938                                      "fsf_s_class_nsup");
3939                 zfcp_erp_adapter_shutdown(unit->port->adapter, 0);
3940                 zfcp_cmd_dbf_event_fsf("unsclass",
3941                                        fsf_req,
3942                                        &header->fsf_status_qual,
3943                                        sizeof (union fsf_status_qual));
3944                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3945                 break;
3946
3947         case FSF_FCPLUN_NOT_VALID:
3948                 ZFCP_LOG_FLAGS(0, "FSF_FCPLUN_NOT_VALID\n");
3949                 ZFCP_LOG_NORMAL("bug: unit 0x%016Lx on port 0x%016Lx on "
3950                                 "adapter %s does not have correct unit "
3951                                 "handle 0x%x\n",
3952                                 unit->fcp_lun,
3953                                 unit->port->wwpn,
3954                                 zfcp_get_busid_by_unit(unit),
3955                                 unit->handle);
3956                 ZFCP_LOG_DEBUG("status qualifier:\n");
3957                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
3958                               (char *) &header->fsf_status_qual,
3959                               sizeof (union fsf_status_qual));
3960                 debug_text_event(fsf_req->adapter->erp_dbf, 1,
3961                                  "fsf_s_fcp_lun_nv");
3962                 zfcp_erp_port_reopen(unit->port, 0);
3963                 zfcp_cmd_dbf_event_fsf("fluninv",
3964                                        fsf_req,
3965                                        &header->fsf_status_qual,
3966                                        sizeof (union fsf_status_qual));
3967                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3968                 break;
3969
3970         case FSF_ACCESS_DENIED:
3971                 ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n");
3972                 ZFCP_LOG_NORMAL("Access denied, cannot send FCP command to "
3973                                 "unit 0x%016Lx on port 0x%016Lx on "
3974                                 "adapter %s\n", unit->fcp_lun, unit->port->wwpn,
3975                                 zfcp_get_busid_by_unit(unit));
3976                 for (counter = 0; counter < 2; counter++) {
3977                         subtable = header->fsf_status_qual.halfword[counter * 2];
3978                         rule = header->fsf_status_qual.halfword[counter * 2 + 1];
3979                         switch (subtable) {
3980                         case FSF_SQ_CFDC_SUBTABLE_OS:
3981                         case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN:
3982                         case FSF_SQ_CFDC_SUBTABLE_PORT_DID:
3983                         case FSF_SQ_CFDC_SUBTABLE_LUN:
3984                                 ZFCP_LOG_INFO("Access denied (%s rule %d)\n",
3985                                         zfcp_act_subtable_type[subtable], rule);
3986                                 break;
3987                         }
3988                 }
3989                 debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_access");
3990                 zfcp_erp_unit_access_denied(unit);
3991                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
3992                 break;
3993
3994         case FSF_DIRECTION_INDICATOR_NOT_VALID:
3995                 ZFCP_LOG_FLAGS(0, "FSF_DIRECTION_INDICATOR_NOT_VALID\n");
3996                 ZFCP_LOG_INFO("bug: Invalid data direction given for unit "
3997                               "0x%016Lx on port 0x%016Lx on adapter %s "
3998                               "(debug info %d)\n",
3999                               unit->fcp_lun,
4000                               unit->port->wwpn,
4001                               zfcp_get_busid_by_unit(unit),
4002                               fsf_req->qtcb->bottom.io.data_direction);
4003                 /* stop operation for this adapter */
4004                 debug_text_event(fsf_req->adapter->erp_dbf, 0,
4005                                  "fsf_s_dir_ind_nv");
4006                 zfcp_erp_adapter_shutdown(unit->port->adapter, 0);
4007                 zfcp_cmd_dbf_event_fsf("dirinv",
4008                                        fsf_req,
4009                                        &header->fsf_status_qual,
4010                                        sizeof (union fsf_status_qual));
4011                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
4012                 break;
4013
4014         case FSF_CMND_LENGTH_NOT_VALID:
4015                 ZFCP_LOG_FLAGS(0, "FSF_CMND_LENGTH_NOT_VALID\n");
4016                 ZFCP_LOG_NORMAL
4017                     ("bug: An invalid control-data-block length field "
4018                      "was found in a command for unit 0x%016Lx on port "
4019                      "0x%016Lx on adapter %s " "(debug info %d)\n",
4020                      unit->fcp_lun, unit->port->wwpn,
4021                      zfcp_get_busid_by_unit(unit),
4022                      fsf_req->qtcb->bottom.io.fcp_cmnd_length);
4023                 /* stop operation for this adapter */
4024                 debug_text_event(fsf_req->adapter->erp_dbf, 0,
4025                                  "fsf_s_cmd_len_nv");
4026                 zfcp_erp_adapter_shutdown(unit->port->adapter, 0);
4027                 zfcp_cmd_dbf_event_fsf("cleninv",
4028                                        fsf_req,
4029                                        &header->fsf_status_qual,
4030                                        sizeof (union fsf_status_qual));
4031                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
4032                 break;
4033
4034         case FSF_PORT_BOXED:
4035                 ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n");
4036                 ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter %s "
4037                                "needs to be reopened\n",
4038                                unit->port->wwpn, zfcp_get_busid_by_unit(unit));
4039                 debug_text_event(fsf_req->adapter->erp_dbf, 2, "fsf_s_pboxed");
4040                 zfcp_erp_port_reopen(unit->port, 0);
4041                 zfcp_cmd_dbf_event_fsf("portbox", fsf_req,
4042                                        &header->fsf_status_qual,
4043                                        sizeof (union fsf_status_qual));
4044                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR |
4045                         ZFCP_STATUS_FSFREQ_RETRY;
4046                 break;
4047
4048         case FSF_LUN_BOXED:
4049                 ZFCP_LOG_FLAGS(0, "FSF_LUN_BOXED\n");
4050                 ZFCP_LOG_NORMAL("unit needs to be reopened (adapter %s, "
4051                                 "wwpn=0x%016Lx, fcp_lun=0x%016Lx)\n",
4052                                 zfcp_get_busid_by_unit(unit),
4053                                 unit->port->wwpn, unit->fcp_lun);
4054                 debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_lboxed");
4055                 zfcp_erp_unit_reopen(unit, 0);
4056                 zfcp_cmd_dbf_event_fsf("unitbox", fsf_req,
4057                                        &header->fsf_status_qual,
4058                                        sizeof(union fsf_status_qual));
4059                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR
4060                         | ZFCP_STATUS_FSFREQ_RETRY;
4061                 break;
4062
4063         case FSF_ADAPTER_STATUS_AVAILABLE:
4064                 ZFCP_LOG_FLAGS(2, "FSF_ADAPTER_STATUS_AVAILABLE\n");
4065                 switch (header->fsf_status_qual.word[0]) {
4066                 case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
4067                         ZFCP_LOG_FLAGS(2,
4068                                        "FSF_SQ_INVOKE_LINK_TEST_PROCEDURE\n");
4069                         /* re-establish link to port */
4070                         debug_text_event(fsf_req->adapter->erp_dbf, 1,
4071                                          "fsf_sq_ltest");
4072                         zfcp_erp_port_reopen(unit->port, 0);
4073                         zfcp_cmd_dbf_event_fsf(
4074                                 "sqltest",
4075                                 fsf_req,
4076                                 &header->fsf_status_qual,
4077                                 sizeof (union fsf_status_qual));
4078                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
4079                         break;
4080                 case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
4081                         ZFCP_LOG_FLAGS(3,
4082                                        "FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED\n");
4083                         /* FIXME(hw) need proper specs for proper action */
4084                         /* let scsi stack deal with retries and escalation */
4085                         debug_text_event(fsf_req->adapter->erp_dbf, 1,
4086                                          "fsf_sq_ulp");
4087                         zfcp_cmd_dbf_event_fsf(
4088                                 "sqdeperp",
4089                                 fsf_req,
4090                                 &header->fsf_status_qual,
4091                                 sizeof (union fsf_status_qual));
4092                         fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
4093                         break;
4094                 default:
4095                         /* FIXME: shall we consider this a successful transfer? */
4096                         ZFCP_LOG_NORMAL
4097                             ("bug: Wrong status qualifier 0x%x arrived.\n",
4098                              header->fsf_status_qual.word[0]);
4099                         debug_text_event(fsf_req->adapter->erp_dbf, 0,
4100                                          "fsf_sq_inval:");
4101                         debug_exception(fsf_req->adapter->erp_dbf, 0,
4102                                         &header->fsf_status_qual.word[0],
4103                                         sizeof(u32));
4104                         break;
4105                 }
4106                 break;
4107
4108         case FSF_GOOD:
4109                 ZFCP_LOG_FLAGS(3, "FSF_GOOD\n");
4110                 break;
4111
4112         case FSF_FCP_RSP_AVAILABLE:
4113                 ZFCP_LOG_FLAGS(2, "FSF_FCP_RSP_AVAILABLE\n");
4114                 break;
4115
4116         default:
4117                 debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_s_inval:");
4118                 debug_exception(fsf_req->adapter->erp_dbf, 0,
4119                                 &header->fsf_status, sizeof(u32));
4120                 break;
4121         }
4122
4123  skip_fsfstatus:
4124         if (fsf_req->status & ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT) {
4125                 retval =
4126                     zfcp_fsf_send_fcp_command_task_management_handler(fsf_req);
4127         } else {
4128                 retval = zfcp_fsf_send_fcp_command_task_handler(fsf_req);
4129         }
4130         return retval;
4131 }
4132
4133 /*
4134  * function:    zfcp_fsf_send_fcp_command_task_handler
4135  *
4136  * purpose:     evaluates FCP_RSP IU
4137  *
4138  * returns:
4139  */
4140 static int
4141 zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req)
4142 {
4143         int retval = 0;
4144         struct scsi_cmnd *scpnt;
4145         struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *)
4146             &(fsf_req->qtcb->bottom.io.fcp_rsp);
4147         struct fcp_cmnd_iu *fcp_cmnd_iu = (struct fcp_cmnd_iu *)
4148             &(fsf_req->qtcb->bottom.io.fcp_cmnd);
4149         u32 sns_len;
4150         char *fcp_rsp_info = zfcp_get_fcp_rsp_info_ptr(fcp_rsp_iu);
4151         unsigned long flags;
4152         struct zfcp_unit *unit = fsf_req->data.send_fcp_command_task.unit;
4153
4154         read_lock_irqsave(&fsf_req->adapter->abort_lock, flags);
4155         scpnt = fsf_req->data.send_fcp_command_task.scsi_cmnd;
4156         if (unlikely(!scpnt)) {
4157                 ZFCP_LOG_DEBUG
4158                     ("Command with fsf_req %p is not associated to "
4159                      "a scsi command anymore. Aborted?\n", fsf_req);
4160                 goto out;
4161         }
4162         if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ABORTED)) {
4163                 /* FIXME: (design) mid-layer should handle DID_ABORT like
4164                  *        DID_SOFT_ERROR by retrying the request for devices
4165                  *        that allow retries.
4166                  */
4167                 ZFCP_LOG_DEBUG("Setting DID_SOFT_ERROR and SUGGEST_RETRY\n");
4168                 set_host_byte(&scpnt->result, DID_SOFT_ERROR);
4169                 set_driver_byte(&scpnt->result, SUGGEST_RETRY);
4170                 goto skip_fsfstatus;
4171         }
4172
4173         if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)) {
4174                 ZFCP_LOG_DEBUG("Setting DID_ERROR\n");
4175                 set_host_byte(&scpnt->result, DID_ERROR);
4176                 goto skip_fsfstatus;
4177         }
4178
4179         /* set message byte of result in SCSI command */
4180         scpnt->result |= COMMAND_COMPLETE << 8;
4181
4182         /*
4183          * copy SCSI status code of FCP_STATUS of FCP_RSP IU to status byte
4184          * of result in SCSI command
4185          */
4186         scpnt->result |= fcp_rsp_iu->scsi_status;
4187         if (unlikely(fcp_rsp_iu->scsi_status)) {
4188                 /* DEBUG */
4189                 ZFCP_LOG_DEBUG("status for SCSI Command:\n");
4190                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
4191                               scpnt->cmnd, scpnt->cmd_len);
4192                 ZFCP_LOG_DEBUG("SCSI status code 0x%x\n",
4193                                 fcp_rsp_iu->scsi_status);
4194                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
4195                               (void *) fcp_rsp_iu, sizeof (struct fcp_rsp_iu));
4196                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
4197                               zfcp_get_fcp_sns_info_ptr(fcp_rsp_iu),
4198                               fcp_rsp_iu->fcp_sns_len);
4199         }
4200
4201         /* check FCP_RSP_INFO */
4202         if (unlikely(fcp_rsp_iu->validity.bits.fcp_rsp_len_valid)) {
4203                 ZFCP_LOG_DEBUG("rsp_len is valid\n");
4204                 switch (fcp_rsp_info[3]) {
4205                 case RSP_CODE_GOOD:
4206                         ZFCP_LOG_FLAGS(3, "RSP_CODE_GOOD\n");
4207                         /* ok, continue */
4208                         ZFCP_LOG_TRACE("no failure or Task Management "
4209                                        "Function complete\n");
4210                         set_host_byte(&scpnt->result, DID_OK);
4211                         break;
4212                 case RSP_CODE_LENGTH_MISMATCH:
4213                         ZFCP_LOG_FLAGS(0, "RSP_CODE_LENGTH_MISMATCH\n");
4214                         /* hardware bug */
4215                         ZFCP_LOG_NORMAL("bug: FCP response code indictates "
4216                                         "that the fibrechannel protocol data "
4217                                         "length differs from the burst length. "
4218                                         "The problem occured on unit 0x%016Lx "
4219                                         "on port 0x%016Lx on adapter %s",
4220                                         unit->fcp_lun,
4221                                         unit->port->wwpn,
4222                                         zfcp_get_busid_by_unit(unit));
4223                         /* dump SCSI CDB as prepared by zfcp */
4224                         ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
4225                                       (char *) &fsf_req->qtcb->
4226                                       bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE);
4227                         zfcp_cmd_dbf_event_fsf("clenmis", fsf_req, NULL, 0);
4228                         set_host_byte(&scpnt->result, DID_ERROR);
4229                         goto skip_fsfstatus;
4230                 case RSP_CODE_FIELD_INVALID:
4231                         ZFCP_LOG_FLAGS(0, "RSP_CODE_FIELD_INVALID\n");
4232                         /* driver or hardware bug */
4233                         ZFCP_LOG_NORMAL("bug: FCP response code indictates "
4234                                         "that the fibrechannel protocol data "
4235                                         "fields were incorrectly set up. "
4236                                         "The problem occured on the unit "
4237                                         "0x%016Lx on port 0x%016Lx on "
4238                                         "adapter %s",
4239                                         unit->fcp_lun,
4240                                         unit->port->wwpn,
4241                                         zfcp_get_busid_by_unit(unit));
4242                         /* dump SCSI CDB as prepared by zfcp */
4243                         ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
4244                                       (char *) &fsf_req->qtcb->
4245                                       bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE);
4246                         set_host_byte(&scpnt->result, DID_ERROR);
4247                         zfcp_cmd_dbf_event_fsf("codeinv", fsf_req, NULL, 0);
4248                         goto skip_fsfstatus;
4249                 case RSP_CODE_RO_MISMATCH:
4250                         ZFCP_LOG_FLAGS(0, "RSP_CODE_RO_MISMATCH\n");
4251                         /* hardware bug */
4252                         ZFCP_LOG_NORMAL("bug: The FCP response code indicates "
4253                                         "that conflicting  values for the "
4254                                         "fibrechannel payload offset from the "
4255                                         "header were found. "
4256                                         "The problem occured on unit 0x%016Lx "
4257                                         "on port 0x%016Lx on adapter %s.\n",
4258                                         unit->fcp_lun,
4259                                         unit->port->wwpn,
4260                                         zfcp_get_busid_by_unit(unit));
4261                         /* dump SCSI CDB as prepared by zfcp */
4262                         ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
4263                                       (char *) &fsf_req->qtcb->
4264                                       bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE);
4265                         zfcp_cmd_dbf_event_fsf("codemism", fsf_req, NULL, 0);
4266                         set_host_byte(&scpnt->result, DID_ERROR);
4267                         goto skip_fsfstatus;
4268                 default:
4269                         ZFCP_LOG_NORMAL("bug: An invalid FCP response "
4270                                         "code was detected for a command. "
4271                                         "The problem occured on the unit "
4272                                         "0x%016Lx on port 0x%016Lx on "
4273                                         "adapter %s (debug info 0x%x)\n",
4274                                         unit->fcp_lun,
4275                                         unit->port->wwpn,
4276                                         zfcp_get_busid_by_unit(unit),
4277                                         fcp_rsp_info[3]);
4278                         /* dump SCSI CDB as prepared by zfcp */
4279                         ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
4280                                       (char *) &fsf_req->qtcb->
4281                                       bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE);
4282                         zfcp_cmd_dbf_event_fsf("undeffcp", fsf_req, NULL, 0);
4283                         set_host_byte(&scpnt->result, DID_ERROR);
4284                 }
4285         }
4286
4287         /* check for sense data */
4288         if (unlikely(fcp_rsp_iu->validity.bits.fcp_sns_len_valid)) {
4289                 sns_len = FSF_FCP_RSP_SIZE -
4290                     sizeof (struct fcp_rsp_iu) + fcp_rsp_iu->fcp_rsp_len;
4291                 ZFCP_LOG_TRACE("room for %i bytes sense data in QTCB\n",
4292                                sns_len);
4293                 sns_len = min(sns_len, (u32) SCSI_SENSE_BUFFERSIZE);
4294                 ZFCP_LOG_TRACE("room for %i bytes sense data in SCSI command\n",
4295                                SCSI_SENSE_BUFFERSIZE);
4296                 sns_len = min(sns_len, fcp_rsp_iu->fcp_sns_len);
4297                 ZFCP_LOG_TRACE("scpnt->result =0x%x, command was:\n",
4298                                scpnt->result);
4299                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE,
4300                               (void *) &scpnt->cmnd, scpnt->cmd_len);
4301
4302                 ZFCP_LOG_TRACE("%i bytes sense data provided by FCP\n",
4303                                fcp_rsp_iu->fcp_sns_len);
4304                 memcpy(&scpnt->sense_buffer,
4305                        zfcp_get_fcp_sns_info_ptr(fcp_rsp_iu), sns_len);
4306                 ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE,
4307                               (void *) &scpnt->sense_buffer, sns_len);
4308         }
4309
4310         /* check for overrun */
4311         if (unlikely(fcp_rsp_iu->validity.bits.fcp_resid_over)) {
4312                 ZFCP_LOG_INFO("A data overrun was detected for a command. "
4313                               "unit 0x%016Lx, port 0x%016Lx, adapter %s. "
4314                               "The response data length is "
4315                               "%d, the original length was %d.\n",
4316                               unit->fcp_lun,
4317                               unit->port->wwpn,
4318                               zfcp_get_busid_by_unit(unit),
4319                               fcp_rsp_iu->fcp_resid,
4320                               (int) zfcp_get_fcp_dl(fcp_cmnd_iu));
4321         }
4322
4323         /* check for underrun */
4324         if (unlikely(fcp_rsp_iu->validity.bits.fcp_resid_under)) {
4325                 ZFCP_LOG_INFO("A data underrun was detected for a command. "
4326                               "unit 0x%016Lx, port 0x%016Lx, adapter %s. "
4327                               "The response data length is "
4328                               "%d, the original length was %d.\n",
4329                               unit->fcp_lun,
4330                               unit->port->wwpn,
4331                               zfcp_get_busid_by_unit(unit),
4332                               fcp_rsp_iu->fcp_resid,
4333                               (int) zfcp_get_fcp_dl(fcp_cmnd_iu));
4334
4335                 scpnt->resid = fcp_rsp_iu->fcp_resid;
4336                 if (scpnt->request_bufflen - scpnt->resid < scpnt->underflow)
4337                         scpnt->result |= DID_ERROR << 16;
4338         }
4339
4340  skip_fsfstatus:
4341         ZFCP_LOG_DEBUG("scpnt->result =0x%x\n", scpnt->result);
4342
4343         zfcp_cmd_dbf_event_scsi("response", scpnt);
4344
4345         /* cleanup pointer (need this especially for abort) */
4346         scpnt->host_scribble = NULL;
4347
4348         /*
4349          * NOTE:
4350          * according to the outcome of a discussion on linux-scsi we
4351          * don't need to grab the io_request_lock here since we use
4352          * the new eh
4353          */
4354         /* always call back */
4355
4356         (scpnt->scsi_done) (scpnt);
4357
4358         /*
4359          * We must hold this lock until scsi_done has been called.
4360          * Otherwise we may call scsi_done after abort regarding this
4361          * command has completed.
4362          * Note: scsi_done must not block!
4363          */
4364  out:
4365         read_unlock_irqrestore(&fsf_req->adapter->abort_lock, flags);
4366         return retval;
4367 }
4368
4369 /*
4370  * function:    zfcp_fsf_send_fcp_command_task_management_handler
4371  *
4372  * purpose:     evaluates FCP_RSP IU
4373  *
4374  * returns:
4375  */
4376 static int
4377 zfcp_fsf_send_fcp_command_task_management_handler(struct zfcp_fsf_req *fsf_req)
4378 {
4379         int retval = 0;
4380         struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *)
4381             &(fsf_req->qtcb->bottom.io.fcp_rsp);
4382         char *fcp_rsp_info = zfcp_get_fcp_rsp_info_ptr(fcp_rsp_iu);
4383         struct zfcp_unit *unit =
4384             fsf_req->data.send_fcp_command_task_management.unit;
4385
4386         del_timer(&fsf_req->adapter->scsi_er_timer);
4387         if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) {
4388                 fsf_req->status |= ZFCP_STATUS_FSFREQ_TMFUNCFAILED;
4389                 goto skip_fsfstatus;
4390         }
4391
4392         /* check FCP_RSP_INFO */
4393         switch (fcp_rsp_info[3]) {
4394         case RSP_CODE_GOOD:
4395                 ZFCP_LOG_FLAGS(3, "RSP_CODE_GOOD\n");
4396                 /* ok, continue */
4397                 ZFCP_LOG_DEBUG("no failure or Task Management "
4398                                "Function complete\n");
4399                 break;
4400         case RSP_CODE_TASKMAN_UNSUPP:
4401                 ZFCP_LOG_FLAGS(0, "RSP_CODE_TASKMAN_UNSUPP\n");
4402                 ZFCP_LOG_NORMAL("bug: A reuested task management function "
4403                                 "is not supported on the target device "
4404                                 "unit 0x%016Lx, port 0x%016Lx, adapter %s\n ",
4405                                 unit->fcp_lun,
4406                                 unit->port->wwpn,
4407                                 zfcp_get_busid_by_unit(unit));
4408                 fsf_req->status |= ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP;
4409                 break;
4410         case RSP_CODE_TASKMAN_FAILED:
4411                 ZFCP_LOG_FLAGS(0, "RSP_CODE_TASKMAN_FAILED\n");
4412                 ZFCP_LOG_NORMAL("bug: A reuested task management function "
4413                                 "failed to complete successfully. "
4414                                 "unit 0x%016Lx, port 0x%016Lx, adapter %s.\n",
4415                                 unit->fcp_lun,
4416                                 unit->port->wwpn,
4417                                 zfcp_get_busid_by_unit(unit));
4418                 fsf_req->status |= ZFCP_STATUS_FSFREQ_TMFUNCFAILED;
4419                 break;
4420         default:
4421                 ZFCP_LOG_NORMAL("bug: An invalid FCP response "
4422                                 "code was detected for a command. "
4423                                 "unit 0x%016Lx, port 0x%016Lx, adapter %s "
4424                                 "(debug info 0x%x)\n",
4425                                 unit->fcp_lun,
4426                                 unit->port->wwpn,
4427                                 zfcp_get_busid_by_unit(unit),
4428                                 fcp_rsp_info[3]);
4429                 fsf_req->status |= ZFCP_STATUS_FSFREQ_TMFUNCFAILED;
4430         }
4431
4432       skip_fsfstatus:
4433         return retval;
4434 }
4435
4436
4437 /*
4438  * function:    zfcp_fsf_control_file
4439  *
4440  * purpose:     Initiator of the control file upload/download FSF requests
4441  *
4442  * returns:     0           - FSF request is successfuly created and queued
4443  *              -EOPNOTSUPP - The FCP adapter does not have Control File support
4444  *              -EINVAL     - Invalid direction specified
4445  *              -ENOMEM     - Insufficient memory
4446  *              -EPERM      - Cannot create FSF request or place it in QDIO queue
4447  */
4448 int
4449 zfcp_fsf_control_file(struct zfcp_adapter *adapter,
4450                       struct zfcp_fsf_req **fsf_req_ptr,
4451                       u32 fsf_command,
4452                       u32 option,
4453                       struct zfcp_sg_list *sg_list)
4454 {
4455         struct zfcp_fsf_req *fsf_req;
4456         struct fsf_qtcb_bottom_support *bottom;
4457         volatile struct qdio_buffer_element *sbale;
4458         struct timer_list *timer;
4459         unsigned long lock_flags;
4460         int req_flags = 0;
4461         int direction;
4462         int retval = 0;
4463
4464         if (!(adapter->supported_features & FSF_FEATURE_CFDC)) {
4465                 ZFCP_LOG_INFO("cfdc not supported (adapter %s)\n",
4466                               zfcp_get_busid_by_adapter(adapter));
4467                 retval = -EOPNOTSUPP;
4468                 goto out;
4469         }
4470
4471         switch (fsf_command) {
4472
4473         case FSF_QTCB_DOWNLOAD_CONTROL_FILE:
4474                 direction = SBAL_FLAGS0_TYPE_WRITE;
4475                 if ((option != FSF_CFDC_OPTION_FULL_ACCESS) &&
4476                     (option != FSF_CFDC_OPTION_RESTRICTED_ACCESS))
4477                         req_flags = ZFCP_WAIT_FOR_SBAL;
4478                 break;
4479
4480         case FSF_QTCB_UPLOAD_CONTROL_FILE:
4481                 direction = SBAL_FLAGS0_TYPE_READ;
4482                 break;
4483
4484         default:
4485                 ZFCP_LOG_INFO("Invalid FSF command code 0x%08x\n", fsf_command);
4486                 retval = -EINVAL;
4487                 goto out;
4488         }
4489
4490         timer = kmalloc(sizeof(struct timer_list), GFP_KERNEL);
4491         if (!timer) {
4492                 retval = -ENOMEM;
4493                 goto out;
4494         }
4495
4496         retval = zfcp_fsf_req_create(adapter, fsf_command, req_flags,
4497                                      NULL, &lock_flags, &fsf_req);
4498         if (retval < 0) {
4499                 ZFCP_LOG_INFO("error: Could not create FSF request for the "
4500                               "adapter %s\n",
4501                         zfcp_get_busid_by_adapter(adapter));
4502                 retval = -EPERM;
4503                 goto unlock_queue_lock;
4504         }
4505
4506         sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
4507         sbale[0].flags |= direction;
4508
4509         bottom = &fsf_req->qtcb->bottom.support;
4510         bottom->operation_subtype = FSF_CFDC_OPERATION_SUBTYPE;
4511         bottom->option = option;
4512
4513         if (sg_list->count > 0) {
4514                 int bytes;
4515
4516                 bytes = zfcp_qdio_sbals_from_sg(fsf_req, direction,
4517                                                 sg_list->sg, sg_list->count,
4518                                                 ZFCP_MAX_SBALS_PER_REQ);
4519                 if (bytes != ZFCP_CFDC_MAX_CONTROL_FILE_SIZE) {
4520                         ZFCP_LOG_INFO(
4521                                 "error: Could not create sufficient number of "
4522                                 "SBALS for an FSF request to the adapter %s\n",
4523                                 zfcp_get_busid_by_adapter(adapter));
4524                         retval = -ENOMEM;
4525                         goto free_fsf_req;
4526                 }
4527         } else
4528                 sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
4529
4530         init_timer(timer);
4531         timer->function = zfcp_fsf_request_timeout_handler;
4532         timer->data = (unsigned long) adapter;
4533         timer->expires = ZFCP_FSF_REQUEST_TIMEOUT;
4534
4535         retval = zfcp_fsf_req_send(fsf_req, timer);
4536         if (retval < 0) {
4537                 ZFCP_LOG_INFO("initiation of cfdc up/download failed"
4538                               "(adapter %s)\n",
4539                               zfcp_get_busid_by_adapter(adapter));
4540                 retval = -EPERM;
4541                 goto free_fsf_req;
4542         }
4543         write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags);
4544
4545         ZFCP_LOG_NORMAL("Control file %s FSF request has been sent to the "
4546                         "adapter %s\n",
4547                         fsf_command == FSF_QTCB_DOWNLOAD_CONTROL_FILE ?
4548                         "download" : "upload",
4549                         zfcp_get_busid_by_adapter(adapter));
4550
4551         wait_event(fsf_req->completion_wq,
4552                    fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
4553
4554         *fsf_req_ptr = fsf_req;
4555         del_timer_sync(timer);
4556         goto free_timer;
4557
4558  free_fsf_req:
4559         zfcp_fsf_req_free(fsf_req);
4560  unlock_queue_lock:
4561         write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags);
4562  free_timer:
4563         kfree(timer);
4564  out:
4565         return retval;
4566 }
4567
4568
4569 /*
4570  * function:    zfcp_fsf_control_file_handler
4571  *
4572  * purpose:     Handler of the control file upload/download FSF requests
4573  *
4574  * returns:     0       - FSF request successfuly processed
4575  *              -EAGAIN - Operation has to be repeated because of a temporary problem
4576  *              -EACCES - There is no permission to execute an operation
4577  *              -EPERM  - The control file is not in a right format
4578  *              -EIO    - There is a problem with the FCP adapter
4579  *              -EINVAL - Invalid operation
4580  *              -EFAULT - User space memory I/O operation fault
4581  */
4582 static int
4583 zfcp_fsf_control_file_handler(struct zfcp_fsf_req *fsf_req)
4584 {
4585         struct zfcp_adapter *adapter = fsf_req->adapter;
4586         struct fsf_qtcb_header *header = &fsf_req->qtcb->header;
4587         struct fsf_qtcb_bottom_support *bottom = &fsf_req->qtcb->bottom.support;
4588         int retval = 0;
4589
4590         if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) {
4591                 retval = -EINVAL;
4592                 goto skip_fsfstatus;
4593         }
4594
4595         switch (header->fsf_status) {
4596
4597         case FSF_GOOD:
4598                 ZFCP_LOG_FLAGS(2, "FSF_GOOD\n");
4599                 ZFCP_LOG_NORMAL(
4600                         "The FSF request has been successfully completed "
4601                         "on the adapter %s\n",
4602                         zfcp_get_busid_by_adapter(adapter));
4603                 break;
4604
4605         case FSF_OPERATION_PARTIALLY_SUCCESSFUL:
4606                 ZFCP_LOG_FLAGS(2, "FSF_OPERATION_PARTIALLY_SUCCESSFUL\n");
4607                 if (bottom->operation_subtype == FSF_CFDC_OPERATION_SUBTYPE) {
4608                         switch (header->fsf_status_qual.word[0]) {
4609
4610                         case FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE:
4611                                 ZFCP_LOG_NORMAL(
4612                                         "CFDC of the adapter %s could not "
4613                                         "be saved on the SE\n",
4614                                         zfcp_get_busid_by_adapter(adapter));
4615                                 break;
4616
4617                         case FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE2:
4618                                 ZFCP_LOG_NORMAL(
4619                                         "CFDC of the adapter %s could not "
4620                                         "be copied to the secondary SE\n",
4621                                         zfcp_get_busid_by_adapter(adapter));
4622                                 break;
4623
4624                         default:
4625                                 ZFCP_LOG_NORMAL(
4626                                         "CFDC could not be hardened "
4627                                         "on the adapter %s\n",
4628                                         zfcp_get_busid_by_adapter(adapter));
4629                         }
4630                 }
4631                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
4632                 retval = -EAGAIN;
4633                 break;
4634
4635         case FSF_AUTHORIZATION_FAILURE:
4636                 ZFCP_LOG_FLAGS(2, "FSF_AUTHORIZATION_FAILURE\n");
4637                 ZFCP_LOG_NORMAL(
4638                         "Adapter %s does not accept privileged commands\n",
4639                         zfcp_get_busid_by_adapter(adapter));
4640                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
4641                 retval = -EACCES;
4642                 break;
4643
4644         case FSF_CFDC_ERROR_DETECTED:
4645                 ZFCP_LOG_FLAGS(2, "FSF_CFDC_ERROR_DETECTED\n");
4646                 ZFCP_LOG_NORMAL(
4647                         "Error at position %d in the CFDC, "
4648                         "CFDC is discarded by the adapter %s\n",
4649                         header->fsf_status_qual.word[0],
4650                         zfcp_get_busid_by_adapter(adapter));
4651                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
4652                 retval = -EPERM;
4653                 break;
4654
4655         case FSF_CONTROL_FILE_UPDATE_ERROR:
4656                 ZFCP_LOG_FLAGS(2, "FSF_CONTROL_FILE_UPDATE_ERROR\n");
4657                 ZFCP_LOG_NORMAL(
4658                         "Adapter %s cannot harden the control file, "
4659                         "file is discarded\n",
4660                         zfcp_get_busid_by_adapter(adapter));
4661                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
4662                 retval = -EIO;
4663                 break;
4664
4665         case FSF_CONTROL_FILE_TOO_LARGE:
4666                 ZFCP_LOG_FLAGS(2, "FSF_CONTROL_FILE_TOO_LARGE\n");
4667                 ZFCP_LOG_NORMAL(
4668                         "Control file is too large, file is discarded "
4669                         "by the adapter %s\n",
4670                         zfcp_get_busid_by_adapter(adapter));
4671                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
4672                 retval = -EIO;
4673                 break;
4674
4675         case FSF_ACCESS_CONFLICT_DETECTED:
4676                 ZFCP_LOG_FLAGS(2, "FSF_ACCESS_CONFLICT_DETECTED\n");
4677                 if (bottom->operation_subtype == FSF_CFDC_OPERATION_SUBTYPE)
4678                         ZFCP_LOG_NORMAL(
4679                                 "CFDC has been discarded by the adapter %s, "
4680                                 "because activation would impact "
4681                                 "%d active connection(s)\n",
4682                                 zfcp_get_busid_by_adapter(adapter),
4683                                 header->fsf_status_qual.word[0]);
4684                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
4685                 retval = -EIO;
4686                 break;
4687
4688         case FSF_CONFLICTS_OVERRULED:
4689                 ZFCP_LOG_FLAGS(2, "FSF_CONFLICTS_OVERRULED\n");
4690                 if (bottom->operation_subtype == FSF_CFDC_OPERATION_SUBTYPE)
4691                         ZFCP_LOG_NORMAL(
4692                                 "CFDC has been activated on the adapter %s, "
4693                                 "but activation has impacted "
4694                                 "%d active connection(s)\n",
4695                                 zfcp_get_busid_by_adapter(adapter),
4696                                 header->fsf_status_qual.word[0]);
4697                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
4698                 retval = -EIO;
4699                 break;
4700
4701         case FSF_UNKNOWN_OP_SUBTYPE:
4702                 ZFCP_LOG_FLAGS(2, "FSF_UNKNOWN_OP_SUBTYPE\n");
4703                 ZFCP_LOG_NORMAL("unknown operation subtype (adapter: %s, "
4704                                 "op_subtype=0x%x)\n",
4705                                 zfcp_get_busid_by_adapter(adapter),
4706                                 bottom->operation_subtype);
4707                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
4708                 retval = -EINVAL;
4709                 break;
4710
4711         case FSF_INVALID_COMMAND_OPTION:
4712                 ZFCP_LOG_FLAGS(2, "FSF_INVALID_COMMAND_OPTION\n");
4713                 ZFCP_LOG_NORMAL(
4714                         "Invalid option 0x%x has been specified "
4715                         "in QTCB bottom sent to the adapter %s\n",
4716                         bottom->option,
4717                         zfcp_get_busid_by_adapter(adapter));
4718                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
4719                 retval = -EINVAL;
4720                 break;
4721
4722         default:
4723                 ZFCP_LOG_NORMAL(
4724                         "bug: An unknown/unexpected FSF status 0x%08x "
4725                         "was presented on the adapter %s\n",
4726                         header->fsf_status,
4727                         zfcp_get_busid_by_adapter(adapter));
4728                 debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_sq_inval");
4729                 debug_exception(fsf_req->adapter->erp_dbf, 0,
4730                         &header->fsf_status_qual.word[0], sizeof(u32));
4731                 fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
4732                 retval = -EINVAL;
4733                 break;
4734         }
4735
4736 skip_fsfstatus:
4737         return retval;
4738 }
4739
4740
4741 /*
4742  * function:    zfcp_fsf_req_wait_and_cleanup
4743  *
4744  * purpose:
4745  *
4746  * FIXME(design): signal seems to be <0 !!!
4747  * returns:     0       - request completed (*status is valid), cleanup succ.
4748  *              <0      - request completed (*status is valid), cleanup failed
4749  *              >0      - signal which interrupted waiting (*status invalid),
4750  *                        request not completed, no cleanup
4751  *
4752  *              *status is a copy of status of completed fsf_req
4753  */
4754 int
4755 zfcp_fsf_req_wait_and_cleanup(struct zfcp_fsf_req *fsf_req,
4756                               int interruptible, u32 * status)
4757 {
4758         int retval = 0;
4759         int signal = 0;
4760
4761         if (interruptible) {
4762                 __wait_event_interruptible(fsf_req->completion_wq,
4763                                            fsf_req->status &
4764                                            ZFCP_STATUS_FSFREQ_COMPLETED,
4765                                            signal);
4766                 if (signal) {
4767                         ZFCP_LOG_DEBUG("Caught signal %i while waiting for the "
4768                                        "completion of the request at %p\n",
4769                                        signal, fsf_req);
4770                         retval = signal;
4771                         goto out;
4772                 }
4773         } else {
4774                 __wait_event(fsf_req->completion_wq,
4775                              fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
4776         }
4777
4778         *status = fsf_req->status;
4779
4780         /* cleanup request */
4781         zfcp_fsf_req_cleanup(fsf_req);
4782  out:
4783         return retval;
4784 }
4785
4786 static inline int
4787 zfcp_fsf_req_sbal_check(unsigned long *flags,
4788                         struct zfcp_qdio_queue *queue, int needed)
4789 {
4790         write_lock_irqsave(&queue->queue_lock, *flags);
4791         if (likely(atomic_read(&queue->free_count) >= needed))
4792                 return 1;
4793         write_unlock_irqrestore(&queue->queue_lock, *flags);
4794         return 0;
4795 }
4796
4797 /*
4798  * set qtcb pointer in fsf_req and initialize QTCB
4799  */
4800 static inline void
4801 zfcp_fsf_req_qtcb_init(struct zfcp_fsf_req *fsf_req, u32 fsf_cmd)
4802 {
4803         if (likely(fsf_req->qtcb != NULL)) {
4804                 fsf_req->qtcb->prefix.req_id = (unsigned long)fsf_req;
4805                 fsf_req->qtcb->prefix.ulp_info = ZFCP_ULP_INFO_VERSION;
4806                 fsf_req->qtcb->prefix.qtcb_type = fsf_qtcb_type[fsf_cmd];
4807                 fsf_req->qtcb->prefix.qtcb_version = ZFCP_QTCB_VERSION;
4808                 fsf_req->qtcb->header.req_handle = (unsigned long)fsf_req;
4809                 fsf_req->qtcb->header.fsf_command = fsf_cmd;
4810         }
4811 }
4812
4813 /**
4814  * zfcp_fsf_req_sbal_get - try to get one SBAL in the request queue
4815  * @adapter: adapter for which request queue is examined
4816  * @req_flags: flags indicating whether to wait for needed SBAL or not
4817  * @lock_flags: lock_flags if queue_lock is taken
4818  * Return: 0 on success, otherwise -EIO, or -ERESTARTSYS
4819  * Locks: lock adapter->request_queue->queue_lock on success
4820  */
4821 static int
4822 zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter, int req_flags,
4823                       unsigned long *lock_flags)
4824 {
4825         long ret;
4826         struct zfcp_qdio_queue *req_queue = &adapter->request_queue;
4827
4828         if (unlikely(req_flags & ZFCP_WAIT_FOR_SBAL)) {
4829                 ret = wait_event_interruptible_timeout(adapter->request_wq,
4830                         zfcp_fsf_req_sbal_check(lock_flags, req_queue, 1),
4831                                                        ZFCP_SBAL_TIMEOUT);
4832                 if (ret < 0)
4833                         return ret;
4834                 if (!ret)
4835                         return -EIO;
4836         } else if (!zfcp_fsf_req_sbal_check(lock_flags, req_queue, 1))
4837                 return -EIO;
4838
4839         return 0;
4840 }
4841
4842 /*
4843  * function:    zfcp_fsf_req_create
4844  *
4845  * purpose:     create an FSF request at the specified adapter and
4846  *              setup common fields
4847  *
4848  * returns:     -ENOMEM if there was insufficient memory for a request
4849  *              -EIO if no qdio buffers could be allocate to the request
4850  *              -EINVAL/-EPERM on bug conditions in req_dequeue
4851  *              0 in success
4852  *
4853  * note:        The created request is returned by reference.
4854  *
4855  * locks:       lock of concerned request queue must not be held,
4856  *              but is held on completion (write, irqsave)
4857  */
4858 int
4859 zfcp_fsf_req_create(struct zfcp_adapter *adapter, u32 fsf_cmd, int req_flags,
4860                     mempool_t *pool, unsigned long *lock_flags,
4861                     struct zfcp_fsf_req **fsf_req_p)
4862 {
4863         volatile struct qdio_buffer_element *sbale;
4864         struct zfcp_fsf_req *fsf_req = NULL;
4865         int ret = 0;
4866         struct zfcp_qdio_queue *req_queue = &adapter->request_queue;
4867
4868         /* allocate new FSF request */
4869         fsf_req = zfcp_fsf_req_alloc(pool, req_flags);
4870         if (unlikely(NULL == fsf_req)) {
4871                 ZFCP_LOG_DEBUG("error: Could not put an FSF request into"
4872                                "the outbound (send) queue.\n");
4873                 ret = -ENOMEM;
4874                 goto failed_fsf_req;
4875         }
4876
4877         zfcp_fsf_req_qtcb_init(fsf_req, fsf_cmd);
4878
4879         /* initialize waitqueue which may be used to wait on
4880            this request completion */
4881         init_waitqueue_head(&fsf_req->completion_wq);
4882
4883         ret = zfcp_fsf_req_sbal_get(adapter, req_flags, lock_flags);
4884         if(ret < 0) {
4885                 goto failed_sbals;
4886         }
4887
4888         /*
4889          * We hold queue_lock here. Check if QDIOUP is set and let request fail
4890          * if it is not set (see also *_open_qdio and *_close_qdio).
4891          */
4892
4893         if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status)) {
4894                 write_unlock_irqrestore(&req_queue->queue_lock, *lock_flags);
4895                 ret = -EIO;
4896                 goto failed_sbals;
4897         }
4898
4899         fsf_req->adapter = adapter;     /* pointer to "parent" adapter */
4900         fsf_req->fsf_command = fsf_cmd;
4901         fsf_req->sbal_number = 1;
4902         fsf_req->sbal_first = req_queue->free_index;
4903         fsf_req->sbal_curr = req_queue->free_index;
4904         fsf_req->sbale_curr = 1;
4905
4906         if (likely(req_flags & ZFCP_REQ_AUTO_CLEANUP)) {
4907                 fsf_req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
4908         }
4909
4910         sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
4911
4912         /* setup common SBALE fields */
4913         sbale[0].addr = fsf_req;
4914         sbale[0].flags |= SBAL_FLAGS0_COMMAND;
4915         if (likely(fsf_req->qtcb != NULL)) {
4916                 sbale[1].addr = (void *) fsf_req->qtcb;
4917                 sbale[1].length = sizeof(struct fsf_qtcb);
4918         }
4919
4920         ZFCP_LOG_TRACE("got %i free BUFFERs starting at index %i\n",
4921                        fsf_req->sbal_number, fsf_req->sbal_first);
4922
4923         goto success;
4924
4925  failed_sbals:
4926 /* dequeue new FSF request previously enqueued */
4927         zfcp_fsf_req_free(fsf_req);
4928         fsf_req = NULL;
4929
4930  failed_fsf_req:
4931         write_lock_irqsave(&req_queue->queue_lock, *lock_flags);
4932  success:
4933         *fsf_req_p = fsf_req;
4934         return ret;
4935 }
4936
4937 /*
4938  * function:    zfcp_fsf_req_send
4939  *
4940  * purpose:     start transfer of FSF request via QDIO
4941  *
4942  * returns:     0 - request transfer succesfully started
4943  *              !0 - start of request transfer failed
4944  */
4945 static int
4946 zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer)
4947 {
4948         struct zfcp_adapter *adapter;
4949         struct zfcp_qdio_queue *req_queue;
4950         volatile struct qdio_buffer_element *sbale;
4951         int new_distance_from_int;
4952         unsigned long flags;
4953         int inc_seq_no = 1;
4954         int retval = 0;
4955
4956         adapter = fsf_req->adapter;
4957         req_queue = &adapter->request_queue,
4958
4959
4960         /* FIXME(debug): remove it later */
4961         sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_first, 0);
4962         ZFCP_LOG_DEBUG("SBALE0 flags=0x%x\n", sbale[0].flags);
4963         ZFCP_LOG_TRACE("HEX DUMP OF SBALE1 PAYLOAD:\n");
4964         ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, (char *) sbale[1].addr,
4965                       sbale[1].length);
4966
4967         /* set sequence counter in QTCB */
4968         if (likely(fsf_req->qtcb)) {
4969                 fsf_req->qtcb->prefix.req_seq_no = adapter->fsf_req_seq_no;
4970                 fsf_req->seq_no = adapter->fsf_req_seq_no;
4971                 ZFCP_LOG_TRACE("FSF request %p of adapter %s gets "
4972                                "FSF sequence counter value of %i\n",
4973                                fsf_req,
4974                                zfcp_get_busid_by_adapter(adapter),
4975                                fsf_req->qtcb->prefix.req_seq_no);
4976         } else
4977                 inc_seq_no = 0;
4978
4979         /* put allocated FSF request at list tail */
4980         write_lock_irqsave(&adapter->fsf_req_list_lock, flags);
4981         list_add_tail(&fsf_req->list, &adapter->fsf_req_list_head);
4982         write_unlock_irqrestore(&adapter->fsf_req_list_lock, flags);
4983
4984         /* figure out expiration time of timeout and start timeout */
4985         if (unlikely(timer)) {
4986                 timer->expires += jiffies;
4987                 add_timer(timer);
4988         }
4989
4990         ZFCP_LOG_TRACE("request queue of adapter %s: "
4991                        "next free SBAL is %i, %i free SBALs\n",
4992                        zfcp_get_busid_by_adapter(adapter),
4993                        req_queue->free_index,
4994                        atomic_read(&req_queue->free_count));
4995
4996         ZFCP_LOG_DEBUG("calling do_QDIO adapter %s, flags=0x%x, queue_no=%i, "
4997                        "index_in_queue=%i, count=%i, buffers=%p\n",
4998                        zfcp_get_busid_by_adapter(adapter),
4999                        QDIO_FLAG_SYNC_OUTPUT,
5000                        0, fsf_req->sbal_first, fsf_req->sbal_number,
5001                        &req_queue->buffer[fsf_req->sbal_first]);
5002
5003         /*
5004          * adjust the number of free SBALs in request queue as well as
5005          * position of first one
5006          */
5007         atomic_sub(fsf_req->sbal_number, &req_queue->free_count);
5008         ZFCP_LOG_TRACE("free_count=%d\n", atomic_read(&req_queue->free_count));
5009         req_queue->free_index += fsf_req->sbal_number;    /* increase */
5010         req_queue->free_index %= QDIO_MAX_BUFFERS_PER_Q;  /* wrap if needed */
5011         new_distance_from_int = zfcp_qdio_determine_pci(req_queue, fsf_req);
5012
5013         retval = do_QDIO(adapter->ccw_device,
5014                          QDIO_FLAG_SYNC_OUTPUT,
5015                          0, fsf_req->sbal_first, fsf_req->sbal_number, NULL);
5016
5017         if (unlikely(retval)) {
5018                 /* Queues are down..... */
5019                 retval = -EIO;
5020                 /*
5021                  * FIXME(potential race):
5022                  * timer might be expired (absolutely unlikely)
5023                  */
5024                 if (timer)
5025                         del_timer(timer);
5026                 write_lock_irqsave(&adapter->fsf_req_list_lock, flags);
5027                 list_del(&fsf_req->list);
5028                 write_unlock_irqrestore(&adapter->fsf_req_list_lock, flags);
5029                 /*
5030                  * adjust the number of free SBALs in request queue as well as
5031                  * position of first one
5032                  */
5033                 zfcp_qdio_zero_sbals(req_queue->buffer,
5034                                      fsf_req->sbal_first, fsf_req->sbal_number);
5035                 atomic_add(fsf_req->sbal_number, &req_queue->free_count);
5036                 req_queue->free_index -= fsf_req->sbal_number;   /* increase */
5037                 req_queue->free_index += QDIO_MAX_BUFFERS_PER_Q;
5038                 req_queue->free_index %= QDIO_MAX_BUFFERS_PER_Q; /* wrap */
5039                 ZFCP_LOG_DEBUG
5040                         ("error: do_QDIO failed. Buffers could not be enqueued "
5041                          "to request queue.\n");
5042         } else {
5043                 req_queue->distance_from_int = new_distance_from_int;
5044                 /*
5045                  * increase FSF sequence counter -
5046                  * this must only be done for request successfully enqueued to
5047                  * QDIO this rejected requests may be cleaned up by calling
5048                  * routines  resulting in missing sequence counter values
5049                  * otherwise,
5050                  */
5051                 /* Don't increase for unsolicited status */
5052                 if (likely(inc_seq_no)) {
5053                         adapter->fsf_req_seq_no++;
5054                         ZFCP_LOG_TRACE
5055                             ("FSF sequence counter value of adapter %s "
5056                              "increased to %i\n",
5057                              zfcp_get_busid_by_adapter(adapter),
5058                              adapter->fsf_req_seq_no);
5059                 }
5060                 /* count FSF requests pending */
5061                 atomic_inc(&adapter->fsf_reqs_active);
5062         }
5063         return retval;
5064 }
5065
5066 /*
5067  * function:    zfcp_fsf_req_cleanup
5068  *
5069  * purpose:     cleans up an FSF request and removes it from the specified list
5070  *
5071  * returns:
5072  *
5073  * assumption:  no pending SB in SBALEs other than QTCB
5074  */
5075 void
5076 zfcp_fsf_req_cleanup(struct zfcp_fsf_req *fsf_req)
5077 {
5078         struct zfcp_adapter *adapter = fsf_req->adapter;
5079         unsigned long flags;
5080
5081         write_lock_irqsave(&adapter->fsf_req_list_lock, flags);
5082         list_del(&fsf_req->list);
5083         write_unlock_irqrestore(&adapter->fsf_req_list_lock, flags);
5084         zfcp_fsf_req_free(fsf_req);
5085 }
5086
5087 #undef ZFCP_LOG_AREA