patch-2_6_7-vs1_9_1_12

[linux-2.6.git] / drivers / scsi / qla2xxx / qla_mbx.c

/*
 *                  QLOGIC LINUX SOFTWARE
 *
 * QLogic ISP2x00 device driver for Linux 2.6.x
 * Copyright (C) 2003-2004 QLogic Corporation
 * (www.qlogic.com)
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 */

#include "qla_os.h"

#include "qla_def.h"


static void
qla2x00_mbx_sem_timeout(unsigned long data)
{
        struct semaphore        *sem_ptr = (struct semaphore *)data;

        DEBUG11(printk("qla2x00_sem_timeout: entered.\n");)

        if (sem_ptr != NULL) {
                up(sem_ptr);
        }

        DEBUG11(printk("qla2x00_mbx_sem_timeout: exiting.\n");)
}

/*
 * qla2x00_mailbox_command
 *      Issue mailbox command and waits for completion.
 *
 * Input:
 *      ha = adapter block pointer.
 *      mcp = driver internal mbx struct pointer.
 *
 * Output:
 *      mb[MAX_MAILBOX_REGISTER_COUNT] = returned mailbox data.
 *
 * Returns:
 *      0 : QLA_SUCCESS = cmd performed success
 *      1 : QLA_FUNCTION_FAILED   (error encountered)
 *      6 : QLA_FUNCTION_TIMEOUT (timeout condition encountered)
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
{
        int             rval;
        unsigned long    flags = 0;
        device_reg_t     *reg       = ha->iobase;
        struct timer_list       tmp_intr_timer;
        uint8_t         abort_active = test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
        uint8_t         io_lock_on = ha->flags.init_done;
        uint16_t        command;
        uint16_t        *iptr, *optr;
        uint32_t        cnt;
        uint32_t        mboxes;
        unsigned long   mbx_flags = 0;
        unsigned long   wait_time;

        rval = QLA_SUCCESS;

        DEBUG11(printk("qla2x00_mailbox_command(%ld): entered.\n",
            ha->host_no);)
        /*
         * Wait for active mailbox commands to finish by waiting at most
         * tov seconds. This is to serialize actual issuing of mailbox cmds
         * during non ISP abort time.
         */
        if (!abort_active) {
                if (qla2x00_down_timeout(&ha->mbx_cmd_sem, mcp->tov * HZ)) {
                        /* Timeout occurred. Return error. */
                        DEBUG2_3_11(printk("qla2x00_mailbox_command(%ld): cmd "
                            "access timeout. Exiting.\n", ha->host_no);)
                        return QLA_FUNCTION_TIMEOUT;
                }
        }

        ha->flags.mbox_busy = TRUE;
        /* Save mailbox command for debug */
        ha->mcp = mcp;

        /* Try to get mailbox register access */
        if (!abort_active)
                spin_lock_irqsave(&ha->mbx_reg_lock, mbx_flags);

        DEBUG11(printk("scsi%d: prepare to issue mbox cmd=0x%x.\n",
            (int)ha->host_no, mcp->mb[0]);)

        spin_lock_irqsave(&ha->hardware_lock, flags);

        /* Load mailbox registers. */
        optr = (uint16_t *)MAILBOX_REG(ha, reg, 0);

        iptr = mcp->mb;
        command = mcp->mb[0];
        mboxes = mcp->out_mb;

        for (cnt = 0; cnt < ha->mbx_count; cnt++) {
                if (IS_QLA2200(ha) && cnt == 8)
                        optr = (uint16_t *)MAILBOX_REG(ha, reg, 8);
                if (mboxes & BIT_0)
                        WRT_REG_WORD(optr, *iptr);

                mboxes >>= 1;
                optr++;
                iptr++;
        }

#if defined(QL_DEBUG_LEVEL_1)
        printk("qla2x00_mailbox_command: Loaded MBX registers "
            "(displayed in bytes) = \n");
        qla2x00_dump_buffer((uint8_t *)mcp->mb, 16);
        printk("\n");
        qla2x00_dump_buffer(((uint8_t *)mcp->mb + 0x10), 16);
        printk("\n");
        qla2x00_dump_buffer(((uint8_t *)mcp->mb + 0x20), 8);
        printk("\n");
        printk("qla2x00_mailbox_command: I/O address = %lx.\n",
            (u_long)optr);
        qla2x00_dump_regs(ha);
#endif

        /* Issue set host interrupt command to send cmd out. */
        ha->flags.mbox_int = FALSE;
        clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);

        /* Unlock mbx registers and wait for interrupt */

        DEBUG11(printk("qla2x00_mailbox_command: going to unlock irq & "
            "waiting for interrupt. jiffies=%lx.\n", jiffies);)

        /* Wait for mbx cmd completion until timeout */

        if (!abort_active && io_lock_on) {
                /* sleep on completion semaphore */
                DEBUG11(printk("qla2x00_mailbox_command(%ld): "
                    "INTERRUPT MODE. Initializing timer.\n",
                    ha->host_no);)

                init_timer(&tmp_intr_timer);
                tmp_intr_timer.data = (unsigned long)&ha->mbx_intr_sem;
                tmp_intr_timer.expires = jiffies + mcp->tov * HZ;
                tmp_intr_timer.function =
                    (void (*)(unsigned long))qla2x00_mbx_sem_timeout;

                DEBUG11(printk("qla2x00_mailbox_command(%ld): "
                    "Adding timer.\n", ha->host_no);)
                add_timer(&tmp_intr_timer);

                DEBUG11(printk("qla2x00_mailbox_command: going to "
                    "unlock & sleep. time=0x%lx.\n", jiffies);)

                set_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);

                WRT_REG_WORD(&reg->hccr, HCCR_SET_HOST_INT);
                spin_unlock_irqrestore(&ha->hardware_lock, flags);

                if (!abort_active)
                        spin_unlock_irqrestore(&ha->mbx_reg_lock, mbx_flags);

                /* Wait for either the timer to expire
                 * or the mbox completion interrupt
                 */
                down(&ha->mbx_intr_sem);

                DEBUG11(printk("qla2x00_mailbox_command:"
                    "waking up."
                    "time=0x%lx\n", jiffies);)
                clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);

                /* delete the timer */
                del_timer(&tmp_intr_timer);
        } else {

                DEBUG3_11(printk("qla2x00_mailbox_command(%ld): cmd=%x "
                        "POLLING MODE.\n", ha->host_no, command);)

                WRT_REG_WORD(&reg->hccr, HCCR_SET_HOST_INT);
                spin_unlock_irqrestore(&ha->hardware_lock, flags);
                if (!abort_active)
                        spin_unlock_irqrestore(&ha->mbx_reg_lock, mbx_flags);

                wait_time = jiffies + mcp->tov * HZ; /* wait at most tov secs */
                while (!ha->flags.mbox_int) {
                        if (time_after(jiffies, wait_time))
                                break;

                        /* Check for pending interrupts. */
                        qla2x00_poll(ha);

                        udelay(10); /* v4.27 */
                } /* while */
        }

        if (!abort_active)
                spin_lock_irqsave(&ha->mbx_reg_lock, mbx_flags);

        /* Check whether we timed out */
        if (ha->flags.mbox_int) {

                DEBUG3_11(printk("qla2x00_mailbox_cmd: cmd %x completed.\n",
                    command);)

                /* Got interrupt. Clear the flag. */
                ha->flags.mbox_int = FALSE;
                clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);

                if (ha->mailbox_out[0] != MBS_COMMAND_COMPLETE) {
                        qla2x00_stats.mboxerr++;
                        rval = QLA_FUNCTION_FAILED;
                }

                /* Load return mailbox registers. */
                optr = mcp->mb;
                iptr = (uint16_t *)&ha->mailbox_out[0];
                mboxes = mcp->in_mb;
                for (cnt = 0; cnt < ha->mbx_count; cnt++) {
                        if (mboxes & BIT_0)
                                *optr = *iptr;

                        mboxes >>= 1;
                        optr++;
                        iptr++;
                }
        } else {

#if defined(QL_DEBUG_LEVEL_2) || defined(QL_DEBUG_LEVEL_3) || \
                defined(QL_DEBUG_LEVEL_11)
                printk("qla2x00_mailbox_command(%ld): **** MB Command Timeout "
                    "for cmd %x ****\n", ha->host_no, command);
                printk("qla2x00_mailbox_command: icontrol=%x jiffies=%lx\n",
                    RD_REG_WORD(&reg->ictrl), jiffies);
                printk("qla2x00_mailbox_command: *** mailbox[0] = 0x%x ***\n",
                    RD_REG_WORD(optr));
                qla2x00_dump_regs(ha);
#endif

                qla2x00_stats.mboxtout++;
                ha->total_mbx_timeout++;
                rval = QLA_FUNCTION_TIMEOUT;
        }

        if (!abort_active)
                spin_unlock_irqrestore(&ha->mbx_reg_lock, mbx_flags);

        ha->flags.mbox_busy = FALSE;

        /* Clean up */
        ha->mcp = NULL;

        if (!abort_active) {
                DEBUG11(printk("qla2x00_mailbox_cmd: checking for additional "
                    "resp interrupt.\n");)

                /* polling mode for non isp_abort commands. */
                qla2x00_poll(ha);
        }

        if (rval == QLA_FUNCTION_TIMEOUT) {
                if (!io_lock_on || (mcp->flags & IOCTL_CMD)) {
                        /* not in dpc. schedule it for dpc to take over. */
                        DEBUG(printk("qla2x00_mailbox_command(%ld): timeout "
                            "schedule isp_abort_needed.\n",
                            ha->host_no);)
                        DEBUG2_3_11(printk("qla2x00_mailbox_command(%ld): "
                            "timeout schedule isp_abort_needed.\n",
                            ha->host_no);)
                        qla_printk(KERN_WARNING, ha,
                            "Mailbox command timeout occured. Scheduling ISP "
                            "abort.\n");
                        set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
                        if (ha->dpc_wait && !ha->dpc_active) 
                                up(ha->dpc_wait);

                } else if (!abort_active) {

                        /* call abort directly since we are in the DPC thread */
                        DEBUG(printk("qla2x00_mailbox_command(%ld): timeout "
                            "calling abort_isp\n", ha->host_no);)
                        DEBUG2_3_11(printk("qla2x00_mailbox_command(%ld): "
                            "timeout calling abort_isp\n", ha->host_no);)
                        qla_printk(KERN_WARNING, ha,
                            "Mailbox command timeout occured. Issuing ISP "
                            "abort.\n");

                        set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
                        clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
                        if (qla2x00_abort_isp(ha)) {
                                /* failed. retry later. */
                                set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
                        }
                        clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);

                        DEBUG(printk("qla2x00_mailbox_command: finished "
                            "abort_isp\n");)
                        DEBUG2_3_11(printk("qla2x00_mailbox_command: finished "
                            "abort_isp\n");)
                }
        }

        /* Allow next mbx cmd to come in. */
        if (!abort_active)
                up(&ha->mbx_cmd_sem);

        if (rval) {
                DEBUG2_3_11(printk("qla2x00_mailbox_command(%ld): **** FAILED. "
                    "mbx0=%x, mbx1=%x, mbx2=%x, cmd=%x ****\n",
                ha->host_no, mcp->mb[0], mcp->mb[1], mcp->mb[2], command);)
        } else {
                DEBUG11(printk("qla2x00_mailbox_command(%ld): done.\n",
                    ha->host_no);)
        }

        DEBUG11(printk("qla2x00_mailbox_command(%ld): exiting.\n",
            ha->host_no);)

        return rval;
}

/*
 * qla2x00_load_ram
 *      Load adapter RAM using DMA.
 *
 * Input:
 *      ha = adapter block pointer.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_load_ram(scsi_qla_host_t *ha, dma_addr_t req_dma, uint16_t risc_addr,
    uint16_t risc_code_size)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;
        uint32_t        req_len;
        dma_addr_t      nml_dma;
        uint32_t        nml_len;
        uint32_t        normalized;

        DEBUG11(printk("qla2x00_load_ram(%ld): entered.\n",
            ha->host_no);)

        req_len = risc_code_size;
        nml_dma = 0;
        nml_len = 0;

        normalized = qla2x00_normalize_dma_addr(&req_dma, &req_len, &nml_dma,
            &nml_len);

        /* Load first segment */
        mcp->mb[0] = MBC_LOAD_RISC_RAM;
        mcp->mb[1] = risc_addr;
        mcp->mb[2] = MSW(req_dma);
        mcp->mb[3] = LSW(req_dma);
        mcp->mb[4] = (uint16_t)req_len;
        mcp->mb[6] = MSW(MSD(req_dma));
        mcp->mb[7] = LSW(MSD(req_dma));
        mcp->out_mb = MBX_7|MBX_6|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        /* Load second segment - if necessary */
        if (normalized && (rval == QLA_SUCCESS)) {
                mcp->mb[0] = MBC_LOAD_RISC_RAM;
                mcp->mb[1] = risc_addr + (uint16_t)req_len;
                mcp->mb[2] = MSW(nml_dma);
                mcp->mb[3] = LSW(nml_dma);
                mcp->mb[4] = (uint16_t)nml_len;
                mcp->mb[6] = MSW(MSD(nml_dma));
                mcp->mb[7] = LSW(MSD(nml_dma));
                mcp->out_mb = MBX_7|MBX_6|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
                mcp->in_mb = MBX_0;
                mcp->tov = 30;
                mcp->flags = 0;
                rval = qla2x00_mailbox_command(ha, mcp);
        }

        if (rval == QLA_SUCCESS) {
                /* Empty */
                DEBUG11(printk("qla2x00_load_ram(%ld): done.\n", ha->host_no);)
        } else {
                /* Empty */
                DEBUG2_3_11(printk("qla2x00_load_ram(%ld): failed. rval=%x "
                    "mb[0]=%x.\n", ha->host_no, rval, mcp->mb[0]);)
        }
        return rval;
}

/*
 * qla2x00_load_ram_ext
 *      Load adapter extended RAM using DMA.
 *
 * Input:
 *      ha = adapter block pointer.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_load_ram_ext(scsi_qla_host_t *ha, dma_addr_t req_dma,
    uint32_t risc_addr, uint16_t risc_code_size)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;
        uint32_t        req_len;
        dma_addr_t      nml_dma;
        uint32_t        nml_len;
        uint32_t        normalized;

        DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));

        req_len = risc_code_size;
        nml_dma = 0;
        nml_len = 0;

        normalized = qla2x00_normalize_dma_addr(&req_dma, &req_len, &nml_dma,
            &nml_len);

        /* Load first segment */
        mcp->mb[0] = MBC_LOAD_RISC_RAM_EXTENDED;
        mcp->mb[1] = LSW(risc_addr);
        mcp->mb[2] = MSW(req_dma);
        mcp->mb[3] = LSW(req_dma);
        mcp->mb[4] = (uint16_t)req_len;
        mcp->mb[6] = MSW(MSD(req_dma));
        mcp->mb[7] = LSW(MSD(req_dma));
        mcp->mb[8] = MSW(risc_addr);
        mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        /* Load second segment - if necessary */
        if (normalized && (rval == QLA_SUCCESS)) {
                risc_addr += req_len;
                mcp->mb[0] = MBC_LOAD_RISC_RAM_EXTENDED;
                mcp->mb[1] = LSW(risc_addr);
                mcp->mb[2] = MSW(nml_dma);
                mcp->mb[3] = LSW(nml_dma);
                mcp->mb[4] = (uint16_t)nml_len;
                mcp->mb[6] = MSW(MSD(nml_dma));
                mcp->mb[7] = LSW(MSD(nml_dma));
                mcp->mb[8] = MSW(risc_addr);
                mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
                mcp->in_mb = MBX_0;
                mcp->tov = 30;
                mcp->flags = 0;
                rval = qla2x00_mailbox_command(ha, mcp);
        }

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n",
                    __func__, ha->host_no, rval, mcp->mb[0]));
        } else {
                /*EMPTY*/
                DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
        }

        return rval;
}

/*
 * qla2x00_execute_fw
 *      Start adapter firmware.
 *
 * Input:
 *      ha = adapter block pointer.
 *      TARGET_QUEUE_LOCK must be released.
 *      ADAPTER_STATE_LOCK must be released.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_execute_fw(scsi_qla_host_t *ha)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_execute_fw(%ld): entered.\n", ha->host_no);)

        mcp->mb[0] = MBC_EXECUTE_FIRMWARE;
        mcp->mb[1] = *ha->brd_info->fw_info[0].fwstart;
        mcp->out_mb = MBX_1|MBX_0;
        if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
                mcp->mb[2] = 0;
                mcp->out_mb |= MBX_2;
        }

        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        DEBUG11(printk("qla2x00_execute_fw(%ld): done.\n", ha->host_no);)

        return rval;
}

/*
 * qla2x00_get_fw_version
 *      Get firmware version.
 *
 * Input:
 *      ha:             adapter state pointer.
 *      major:          pointer for major number.
 *      minor:          pointer for minor number.
 *      subminor:       pointer for subminor number.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
void
qla2x00_get_fw_version(scsi_qla_host_t *ha, uint16_t *major, uint16_t *minor,
    uint16_t *subminor, uint16_t *attributes)
{
        int             rval;
        mbx_cmd_t       mc;
        mbx_cmd_t       *mcp = &mc;

        DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));

        mcp->mb[0] = MBC_GET_FIRMWARE_VERSION;
        mcp->out_mb = MBX_0;
        mcp->in_mb = MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->flags = 0;
        mcp->tov = 30;
        rval = qla2x00_mailbox_command(ha, mcp);

        /* Return mailbox data. */
        *major = mcp->mb[1];
        *minor = mcp->mb[2];
        *subminor = mcp->mb[3];
        *attributes = mcp->mb[6];

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
                    ha->host_no, rval));
        } else {
                /*EMPTY*/
                DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
        }
}

/*
 * qla2x00_get_fw_options
 *      Set firmware options.
 *
 * Input:
 *      ha = adapter block pointer.
 *      fwopt = pointer for firmware options.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_get_fw_options(scsi_qla_host_t *ha, uint16_t *fwopts)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));

        mcp->mb[0] = MBC_GET_FIRMWARE_OPTION;
        mcp->out_mb = MBX_0;
        mcp->in_mb = MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
                    ha->host_no, rval));
        } else {
                fwopts[1] = mcp->mb[1];
                fwopts[2] = mcp->mb[2];
                fwopts[3] = mcp->mb[3];

                DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
        }

        return rval;
}


/*
 * qla2x00_set_fw_options
 *      Set firmware options.
 *
 * Input:
 *      ha = adapter block pointer.
 *      fwopt = pointer for firmware options.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_set_fw_options(scsi_qla_host_t *ha, uint16_t *fwopts)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));

        mcp->mb[0] = MBC_SET_FIRMWARE_OPTION;
        mcp->mb[1] = fwopts[1];
        mcp->mb[2] = fwopts[2];
        mcp->mb[3] = fwopts[3];
        mcp->mb[10] = fwopts[10];
        mcp->mb[11] = fwopts[11];
        mcp->mb[12] = 0;        /* Undocumented, but used */
        mcp->out_mb = MBX_12|MBX_11|MBX_10|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
                    ha->host_no, rval));
        } else {
                /*EMPTY*/
                DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
        }

        return rval;
}

/*
 * qla2x00_read_ram_word
 *
 * Input:
 *      ha = adapter block pointer.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_read_ram_word(scsi_qla_host_t *ha, uint16_t addr, uint16_t *data)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_read_ram_word(%ld): entered.\n", ha->host_no);)

        mcp->mb[0] = MBC_READ_RAM_WORD;
        mcp->mb[1] = addr;
        mcp->out_mb = MBX_1|MBX_0;
        mcp->in_mb = MBX_0|MBX_2;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_read_ram_word(%ld): failed=%x.\n",
                    ha->host_no, rval);)
        } else {
                *data = mcp->mb[2];
                DEBUG11(printk("qla2x00_read_ram_word(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_write_ram_word
 *
 * Input:
 *      ha = adapter block pointer.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_write_ram_word(scsi_qla_host_t *ha, uint16_t addr, uint16_t data)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_write_ram_word(%ld): entered.\n",
            ha->host_no);)

        mcp->mb[0] = MBC_WRITE_RAM_WORD;
        mcp->mb[1] = addr;
        mcp->mb[2] = data;
        mcp->out_mb = MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_write_ram_word(%ld): failed=%x.\n",
                    ha->host_no, rval);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_write_ram_word(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_write_ram_word_ext
 *
 * Input:
 *      ha = adapter block pointer.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_write_ram_word_ext(scsi_qla_host_t *ha, uint32_t addr, uint16_t data)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));

        mcp->mb[0] = MBC_WRITE_RAM_WORD_EXTENDED;
        mcp->mb[1] = LSW(addr);
        mcp->mb[2] = data;
        mcp->mb[8] = MSW(addr);
        mcp->out_mb = MBX_8|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
                    ha->host_no, rval));
        } else {
                /*EMPTY*/
                DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
        }

        return rval;
}

/*
 * qla2x00_mbx_reg_test
 *      Mailbox register wrap test.
 *
 * Input:
 *      ha = adapter block pointer.
 *      TARGET_QUEUE_LOCK must be released.
 *      ADAPTER_STATE_LOCK must be released.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_mbx_reg_test(scsi_qla_host_t *ha)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_mbx_reg_test(%ld): entered.\n", ha->host_no);)

        mcp->mb[0] = MBC_MAILBOX_REGISTER_TEST;
        mcp->mb[1] = 0xAAAA;
        mcp->mb[2] = 0x5555;
        mcp->mb[3] = 0xAA55;
        mcp->mb[4] = 0x55AA;
        mcp->mb[5] = 0xA5A5;
        mcp->mb[6] = 0x5A5A;
        mcp->mb[7] = 0x2525;
        mcp->out_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval == QLA_SUCCESS) {
                if (mcp->mb[1] != 0xAAAA || mcp->mb[2] != 0x5555 ||
                    mcp->mb[3] != 0xAA55 || mcp->mb[4] != 0x55AA)
                        rval = QLA_FUNCTION_FAILED;
                if (mcp->mb[5] != 0xA5A5 || mcp->mb[6] != 0x5A5A ||
                    mcp->mb[7] != 0x2525)
                        rval = QLA_FUNCTION_FAILED;
        }

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_mbx_reg_test(%ld): failed=%x.\n",
                    ha->host_no, rval);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_mbx_reg_test(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_verify_checksum
 *      Verify firmware checksum.
 *
 * Input:
 *      ha = adapter block pointer.
 *      TARGET_QUEUE_LOCK must be released.
 *      ADAPTER_STATE_LOCK must be released.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_verify_checksum(scsi_qla_host_t *ha)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_verify_checksum(%ld): entered.\n",
            ha->host_no);)

        mcp->mb[0] = MBC_VERIFY_CHECKSUM;
        mcp->mb[1] = *ha->brd_info->fw_info[0].fwstart;
        mcp->out_mb = MBX_1|MBX_0;
        mcp->in_mb = MBX_2|MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_verify_checksum(%ld): failed=%x.\n",
                    ha->host_no, rval);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_verify_checksum(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_issue_iocb
 *      Issue IOCB using mailbox command
 *
 * Input:
 *      ha = adapter state pointer.
 *      buffer = buffer pointer.
 *      phys_addr = physical address of buffer.
 *      size = size of buffer.
 *      TARGET_QUEUE_LOCK must be released.
 *      ADAPTER_STATE_LOCK must be released.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_issue_iocb(scsi_qla_host_t *ha, void*  buffer, dma_addr_t phys_addr,
    size_t size)
{
        int             rval;
        mbx_cmd_t       mc;
        mbx_cmd_t       *mcp = &mc;

        mcp->mb[0] = MBC_IOCB_COMMAND_A64;
        mcp->mb[1] = 0;
        mcp->mb[2] = MSW(phys_addr);
        mcp->mb[3] = LSW(phys_addr);
        mcp->mb[6] = MSW(MSD(phys_addr));
        mcp->mb[7] = LSW(MSD(phys_addr));
        mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_2|MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x",
                    ha->host_no,rval);)
                DEBUG2(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x",
                    ha->host_no,rval);)
        } else {
                /*EMPTY*/
        }

        return rval;
}

/*
 * qla2x00_abort_command
 *      Abort command aborts a specified IOCB.
 *
 * Input:
 *      ha = adapter block pointer.
 *      sp = SB structure pointer.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_abort_command(scsi_qla_host_t *ha, srb_t *sp)
{
        unsigned long   flags = 0;
        fc_port_t       *fcport;
        int             rval;
        uint32_t        handle;
        mbx_cmd_t       mc;
        mbx_cmd_t       *mcp = &mc;

        DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", ha->host_no);)

        fcport = sp->fclun->fcport;

        if (atomic_read(&ha->loop_state) == LOOP_DOWN ||
            atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
                return 1;
        }

        spin_lock_irqsave(&ha->hardware_lock, flags);
        for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
                if (ha->outstanding_cmds[handle] == sp)
                        break;
        }
        spin_unlock_irqrestore(&ha->hardware_lock, flags);

        if (handle == MAX_OUTSTANDING_COMMANDS) {
                /* command not found */
                return QLA_FUNCTION_FAILED;
        }

        mcp->mb[0] = MBC_ABORT_COMMAND;
        if (HAS_EXTENDED_IDS(ha))
                mcp->mb[1] = fcport->loop_id;
        else
                mcp->mb[1] = fcport->loop_id << 8;
        mcp->mb[2] = (uint16_t)handle;
        mcp->mb[3] = (uint16_t)(handle >> 16);
        mcp->mb[6] = (uint16_t)sp->fclun->lun;
        mcp->out_mb = MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                DEBUG2_3_11(printk("qla2x00_abort_command(%ld): failed=%x.\n",
                    ha->host_no, rval);)
        } else {
                sp->flags |= SRB_ABORT_PENDING;
                DEBUG11(printk("qla2x00_abort_command(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_abort_device
 *
 * Input:
 *      ha = adapter block pointer.
 *      loop_id  = FC loop ID
 *      lun  = SCSI LUN.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_abort_device(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_abort_device(%ld): entered.\n", ha->host_no);)

        mcp->mb[0] = MBC_ABORT_DEVICE;
        if (HAS_EXTENDED_IDS(ha))
                mcp->mb[1] = loop_id;
        else
                mcp->mb[1] = loop_id << 8;
        mcp->mb[2] = lun;
        mcp->out_mb = MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        /* Issue marker command. */
        qla2x00_marker(ha, loop_id, lun, MK_SYNC_ID_LUN);

        if (rval != QLA_SUCCESS) {
                qla_printk(KERN_WARNING, ha,
                    "Failed Abort Device Mailbox command. Scheduling ISP "
                    "abort.\n");
                set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
                if (ha->dpc_wait && !ha->dpc_active) 
                        up(ha->dpc_wait);
                DEBUG2_3_11(printk("qla2x00_abort_device(%ld): failed=%x.\n",
                    ha->host_no, rval);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_abort_device(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

#if USE_ABORT_TGT
/*
 * qla2x00_abort_target
 *      Issue abort target mailbox command.
 *
 * Input:
 *      ha = adapter block pointer.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_abort_target(fc_port_t *fcport)
{
        int        rval;
        mbx_cmd_t  mc;
        mbx_cmd_t  *mcp = &mc;

        DEBUG11(printk("qla2x00_abort_target(%ld): entered.\n",
            fcport->ha->host_no);)

        if (fcport == NULL) {
                /* no target to abort */
                return 0;
        }

        mcp->mb[0] = MBC_ABORT_TARGET;
        mcp->out_mb = MBX_2|MBX_1|MBX_0;
        if (HAS_EXTENDED_IDS(fcport->ha)) {
                mcp->mb[1] = fcport->loop_id;
                mcp->mb[10] = 0;
                mcp->out_mb |= MBX_10;
        } else {
                mcp->mb[1] = fcport->loop_id << 8;
        }
        mcp->mb[2] = fcport->ha->loop_reset_delay;

        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(fcport->ha, mcp);

        /* Issue marker command. */
        fcport->ha->marker_needed = 1;

        if (rval != QLA_SUCCESS) {
                DEBUG2_3_11(printk("qla2x00_abort_target(%ld): failed=%x.\n",
                    fcport->ha->host_no, rval);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_abort_target(%ld): done.\n",
                    fcport->ha->host_no);)
        }

        return rval;
}
#endif

/*
 * qla2x00_target_reset
 *      Issue target reset mailbox command.
 *
 * Input:
 *      ha = adapter block pointer.
 *      TARGET_QUEUE_LOCK must be released.
 *      ADAPTER_STATE_LOCK must be released.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_target_reset(scsi_qla_host_t *ha, uint16_t b, uint16_t t)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;
        os_tgt_t *tgt;

        DEBUG11(printk("qla2x00_target_reset(%ld): entered.\n", ha->host_no);)

        tgt = TGT_Q(ha, t);
        if (tgt->fcport == NULL) {
                /* no target to abort */
                return 0;
        }
        if (atomic_read(&tgt->fcport->state) != FCS_ONLINE) {
                /* target not online */
                return 0;
        }

        mcp->mb[0] = MBC_TARGET_RESET;
        if (HAS_EXTENDED_IDS(ha))
                mcp->mb[1] = tgt->fcport->loop_id;
        else
                mcp->mb[1] = tgt->fcport->loop_id << 8;
        mcp->mb[2] = ha->loop_reset_delay;
        mcp->out_mb = MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_target_reset(%ld): failed=%x.\n",
                    ha->host_no, rval);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_target_reset(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_get_adapter_id
 *      Get adapter ID and topology.
 *
 * Input:
 *      ha = adapter block pointer.
 *      id = pointer for loop ID.
 *      al_pa = pointer for AL_PA.
 *      area = pointer for area.
 *      domain = pointer for domain.
 *      top = pointer for topology.
 *      TARGET_QUEUE_LOCK must be released.
 *      ADAPTER_STATE_LOCK must be released.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_get_adapter_id(scsi_qla_host_t *ha, uint16_t *id, uint8_t *al_pa,
    uint8_t *area, uint8_t *domain, uint16_t *top)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_get_adapter_id(%ld): entered.\n",
            ha->host_no);)

        mcp->mb[0] = MBC_GET_ADAPTER_LOOP_ID;
        mcp->out_mb = MBX_0;
        mcp->in_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        /* Return data. */
        *id = mcp->mb[1];
        *al_pa = LSB(mcp->mb[2]);
        *area = MSB(mcp->mb[2]);
        *domain = LSB(mcp->mb[3]);
        *top = mcp->mb[6];

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_get_adapter_id(%ld): failed=%x.\n",
                    ha->host_no, rval);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_get_retry_cnt
 *      Get current firmware login retry count and delay.
 *
 * Input:
 *      ha = adapter block pointer.
 *      retry_cnt = pointer to login retry count.
 *      tov = pointer to login timeout value.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_get_retry_cnt(scsi_qla_host_t *ha, uint8_t *retry_cnt, uint8_t *tov,
    uint16_t *r_a_tov)
{
        int rval;
        uint16_t ratov;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_get_retry_cnt(%ld): entered.\n",
                        ha->host_no);)

        mcp->mb[0] = MBC_GET_RETRY_COUNT;
        mcp->out_mb = MBX_0;
        mcp->in_mb = MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_get_retry_cnt(%ld): failed = %x.\n",
                    ha->host_no, mcp->mb[0]);)
        } else {
                /* Convert returned data and check our values. */
                *r_a_tov = mcp->mb[3] / 2;
                ratov = (mcp->mb[3]/2) / 10;  /* mb[3] value is in 100ms */
                if (mcp->mb[1] * ratov > (*retry_cnt) * (*tov)) {
                        /* Update to the larger values */
                        *retry_cnt = (uint8_t)mcp->mb[1];
                        *tov = ratov;
                }

                DEBUG11(printk("qla2x00_get_retry_cnt(%ld): done. mb3=%d "
                    "ratov=%d.\n", ha->host_no, mcp->mb[3], ratov);)
        }

        return rval;
}

/*
 * qla2x00_init_firmware
 *      Initialize adapter firmware.
 *
 * Input:
 *      ha = adapter block pointer.
 *      dptr = Initialization control block pointer.
 *      size = size of initialization control block.
 *      TARGET_QUEUE_LOCK must be released.
 *      ADAPTER_STATE_LOCK must be released.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_init_firmware(scsi_qla_host_t *ha, uint16_t size)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n",
            ha->host_no);)

        mcp->mb[0] = MBC_INITIALIZE_FIRMWARE;
        mcp->mb[2] = MSW(ha->init_cb_dma);
        mcp->mb[3] = LSW(ha->init_cb_dma);
        mcp->mb[4] = 0;
        mcp->mb[5] = 0;
        mcp->mb[6] = MSW(MSD(ha->init_cb_dma));
        mcp->mb[7] = LSW(MSD(ha->init_cb_dma));
        mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_0;
        mcp->in_mb = MBX_5|MBX_4|MBX_0;
        mcp->buf_size = size;
        mcp->flags = MBX_DMA_OUT;
        mcp->tov = 30;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_init_firmware(%ld): failed=%x "
                    "mb0=%x.\n",
                    ha->host_no, rval, mcp->mb[0]);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_init_firmware(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_get_port_database
 *      Issue normal/enhanced get port database mailbox command
 *      and copy device name as necessary.
 *
 * Input:
 *      ha = adapter state pointer.
 *      dev = structure pointer.
 *      opt = enhanced cmd option byte.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_get_port_database(scsi_qla_host_t *ha, fc_port_t *fcport, uint8_t opt)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;
        port_database_t *pd;
        dma_addr_t pd_dma;

        DEBUG11(printk("qla2x00_get_port_database(%ld): entered.\n",
            ha->host_no);)

        pd = pci_alloc_consistent(ha->pdev, PORT_DATABASE_SIZE, &pd_dma);
        if (pd  == NULL) {
                DEBUG2_3_11(printk("qla2x00_get_port_database(%ld): **** "
                    "Mem Alloc Failed ****", ha->host_no);)
                return QLA_MEMORY_ALLOC_FAILED;
        }
        memset(pd, 0, PORT_DATABASE_SIZE);

        if (opt != 0)
                mcp->mb[0] = MBC_ENHANCED_GET_PORT_DATABASE;
        else
                mcp->mb[0] = MBC_GET_PORT_DATABASE;
        mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
        if (HAS_EXTENDED_IDS(ha)) {
                mcp->mb[1] = fcport->loop_id;
                mcp->mb[10] = opt;
                mcp->out_mb |= MBX_10;
        } else {
                mcp->mb[1] = fcport->loop_id << 8 | opt;
        }
        mcp->mb[2] = MSW(pd_dma);
        mcp->mb[3] = LSW(pd_dma);
        mcp->mb[6] = MSW(MSD(pd_dma));
        mcp->mb[7] = LSW(MSD(pd_dma));

        mcp->in_mb = MBX_0;
        mcp->buf_size = PORT_DATABASE_SIZE;
        mcp->flags = MBX_DMA_IN;
        mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2);
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval == QLA_SUCCESS) {
                /* Names are little-endian. */
                memcpy(fcport->node_name, pd->node_name, WWN_SIZE);
                memcpy(fcport->port_name, pd->port_name, WWN_SIZE);

                /* Get port_id of device. */
                fcport->d_id.b.al_pa = pd->port_id[2];
                fcport->d_id.b.area = pd->port_id[3];
                fcport->d_id.b.domain = pd->port_id[0];
                fcport->d_id.b.rsvd_1 = 0;

                /* Check for device require authentication. */
                pd->common_features & BIT_5 ? (fcport->flags |= FCF_AUTH_REQ) :
                    (fcport->flags &= ~FCF_AUTH_REQ);

                /* If not target must be initiator or unknown type. */
                if ((pd->prli_svc_param_word_3[0] & BIT_4) == 0) {
                        fcport->port_type = FCT_INITIATOR;
                } else {
                        fcport->port_type = FCT_TARGET;

                        /* Check for logged in. */
                        if (pd->master_state != PD_STATE_PORT_LOGGED_IN &&
                            pd->slave_state != PD_STATE_PORT_LOGGED_IN)
                                rval = QLA_FUNCTION_FAILED;
                }
        }

        pci_free_consistent(ha->pdev, PORT_DATABASE_SIZE, pd, pd_dma);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_get_port_database(%ld): "
                    "failed=%x.\n", ha->host_no, rval);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_get_port_database(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_get_firmware_state
 *      Get adapter firmware state.
 *
 * Input:
 *      ha = adapter block pointer.
 *      dptr = pointer for firmware state.
 *      TARGET_QUEUE_LOCK must be released.
 *      ADAPTER_STATE_LOCK must be released.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_get_firmware_state(scsi_qla_host_t *ha, uint16_t *dptr)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_get_firmware_state(%ld): entered.\n",
            ha->host_no);)

        mcp->mb[0] = MBC_GET_FIRMWARE_STATE;
        mcp->out_mb = MBX_0;
        mcp->in_mb = MBX_2|MBX_1|MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        /* Return firmware state. */
        *dptr = mcp->mb[1];

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_get_firmware_state(%ld): "
                    "failed=%x.\n", ha->host_no, rval);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_get_firmware_state(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_get_port_name
 *      Issue get port name mailbox command.
 *      Returned name is in big endian format.
 *
 * Input:
 *      ha = adapter block pointer.
 *      loop_id = loop ID of device.
 *      name = pointer for name.
 *      TARGET_QUEUE_LOCK must be released.
 *      ADAPTER_STATE_LOCK must be released.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_get_port_name(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t *name,
    uint8_t opt)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_get_port_name(%ld): entered.\n",
            ha->host_no);)

        mcp->mb[0] = MBC_GET_PORT_NAME;
        mcp->out_mb = MBX_1|MBX_0;
        if (HAS_EXTENDED_IDS(ha)) {
                mcp->mb[1] = loop_id;
                mcp->mb[10] = opt;
                mcp->out_mb |= MBX_10;
        } else {
                mcp->mb[1] = loop_id << 8 | opt;
        }

        mcp->in_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_get_port_name(%ld): failed=%x.\n",
                    ha->host_no, rval);)
        } else {
                if (name != NULL) {
                        /* This function returns name in big endian. */
                        name[0] = LSB(mcp->mb[2]);
                        name[1] = MSB(mcp->mb[2]);
                        name[2] = LSB(mcp->mb[3]);
                        name[3] = MSB(mcp->mb[3]);
                        name[4] = LSB(mcp->mb[6]);
                        name[5] = MSB(mcp->mb[6]);
                        name[6] = LSB(mcp->mb[7]);
                        name[7] = MSB(mcp->mb[7]);
                }

                DEBUG11(printk("qla2x00_get_port_name(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_get_link_status
 *
 * Input:
 *      ha = adapter block pointer.
 *      loop_id = device loop ID.
 *      ret_buf = pointer to link status return buffer.
 *
 * Returns:
 *      0 = success.
 *      BIT_0 = mem alloc error.
 *      BIT_1 = mailbox error.
 */
uint8_t
qla2x00_get_link_status(scsi_qla_host_t *ha, uint16_t loop_id,
    link_stat_t *ret_buf, uint16_t *status)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;
        link_stat_t *stat_buf;
        dma_addr_t phys_address = 0;


        DEBUG11(printk("qla2x00_get_link_status(%ld): entered.\n",
            ha->host_no);)

        stat_buf = pci_alloc_consistent(ha->pdev, sizeof(link_stat_t),
            &phys_address);
        if (stat_buf == NULL) {
                DEBUG2_3_11(printk("qla2x00_get_link_status(%ld): Failed to "
                    "allocate memory.\n", ha->host_no));
                return BIT_0;
        }
        memset(stat_buf, 0, sizeof(link_stat_t));

        mcp->mb[0] = MBC_GET_LINK_STATUS;
        mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
        if (HAS_EXTENDED_IDS(ha)) {
                mcp->mb[1] = loop_id;
                mcp->mb[10] = 0;
                mcp->out_mb |= MBX_10;
        } else {
                mcp->mb[1] = loop_id << 8;
        }
        mcp->mb[2] = MSW(phys_address);
        mcp->mb[3] = LSW(phys_address);
        mcp->mb[6] = MSW(MSD(phys_address));
        mcp->mb[7] = LSW(MSD(phys_address));

        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = IOCTL_CMD;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval == QLA_SUCCESS) {
                if (mcp->mb[0] != MBS_COMMAND_COMPLETE) {
                        DEBUG2_3_11(printk("qla2x00_get_link_status(%ld): cmd "
                            "failed. mbx0=%x.\n", ha->host_no, mcp->mb[0]);)
                        status[0] = mcp->mb[0];
                        rval = BIT_1;
                } else {
                        /* copy over data -- firmware data is LE. */
                        ret_buf->link_fail_cnt =
                            le32_to_cpu(stat_buf->link_fail_cnt);
                        ret_buf->loss_sync_cnt =
                            le32_to_cpu(stat_buf->loss_sync_cnt);
                        ret_buf->loss_sig_cnt =
                            le32_to_cpu(stat_buf->loss_sig_cnt);
                        ret_buf->prim_seq_err_cnt =
                            le32_to_cpu(stat_buf->prim_seq_err_cnt);
                        ret_buf->inval_xmit_word_cnt =
                            le32_to_cpu(stat_buf->inval_xmit_word_cnt);
                        ret_buf->inval_crc_cnt =
                            le32_to_cpu(stat_buf->inval_crc_cnt);

                        DEBUG11(printk("qla2x00_get_link_status(%ld): stat "
                            "dump: fail_cnt=%d loss_sync=%d loss_sig=%d "
                            "seq_err=%d inval_xmt_word=%d inval_crc=%d.\n",
                            ha->host_no,
                            stat_buf->link_fail_cnt, stat_buf->loss_sync_cnt,
                            stat_buf->loss_sig_cnt, stat_buf->prim_seq_err_cnt,
                            stat_buf->inval_xmit_word_cnt,
                            stat_buf->inval_crc_cnt);)
                }
        } else {
                /* Failed. */
                DEBUG2_3_11(printk("qla2x00_get_link_status(%ld): failed=%x.\n",
                    ha->host_no, rval);)
                rval = BIT_1;
        }

        pci_free_consistent(ha->pdev, sizeof(link_stat_t), stat_buf,
            phys_address);

        return rval;
}

/*
 * qla2x00_lip_reset
 *      Issue LIP reset mailbox command.
 *
 * Input:
 *      ha = adapter block pointer.
 *      TARGET_QUEUE_LOCK must be released.
 *      ADAPTER_STATE_LOCK must be released.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_lip_reset(scsi_qla_host_t *ha)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_lip_reset(%ld): entered.\n",
            ha->host_no);)

        mcp->mb[0] = MBC_LIP_RESET;
        mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
        if (HAS_EXTENDED_IDS(ha)) {
                mcp->mb[1] = 0x00ff;
                mcp->mb[10] = 0;
                mcp->out_mb |= MBX_10;
        } else {
                mcp->mb[1] = 0xff00;
        }
        mcp->mb[2] = ha->loop_reset_delay;
        mcp->mb[3] = 0;

        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_lip_reset(%ld): failed=%x.\n",
                    ha->host_no, rval);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_lip_reset(%ld): done.\n", ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_send_sns
 *      Send SNS command.
 *
 * Input:
 *      ha = adapter block pointer.
 *      sns = pointer for command.
 *      cmd_size = command size.
 *      buf_size = response/command size.
 *      TARGET_QUEUE_LOCK must be released.
 *      ADAPTER_STATE_LOCK must be released.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_send_sns(scsi_qla_host_t *ha, dma_addr_t sns_phys_address,
    uint16_t cmd_size, size_t buf_size)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_send_sns(%ld): entered.\n",
            ha->host_no);)

        DEBUG11(printk("qla2x00_send_sns: retry cnt=%d ratov=%d total "
            "tov=%d.\n", ha->retry_count, ha->login_timeout, mcp->tov);)

        mcp->mb[0] = MBC_SEND_SNS_COMMAND;
        mcp->mb[1] = cmd_size;
        mcp->mb[2] = MSW(sns_phys_address);
        mcp->mb[3] = LSW(sns_phys_address);
        mcp->mb[6] = MSW(MSD(sns_phys_address));
        mcp->mb[7] = LSW(MSD(sns_phys_address));
        mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_0|MBX_1;
        mcp->buf_size = buf_size;
        mcp->flags = MBX_DMA_OUT|MBX_DMA_IN;
        mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2);
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
                    "mb[1]=%x.\n", ha->host_no, rval, mcp->mb[0], mcp->mb[1]);)
                DEBUG2_3_11(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
                    "mb[1]=%x.\n", ha->host_no, rval, mcp->mb[0], mcp->mb[1]);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_send_sns(%ld): done.\n", ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_login_fabric
 *      Issue login fabric port mailbox command.
 *
 * Input:
 *      ha = adapter block pointer.
 *      loop_id = device loop ID.
 *      domain = device domain.
 *      area = device area.
 *      al_pa = device AL_PA.
 *      status = pointer for return status.
 *      opt = command options.
 *      TARGET_QUEUE_LOCK must be released.
 *      ADAPTER_STATE_LOCK must be released.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
    uint8_t area, uint8_t al_pa, uint16_t *mb, uint8_t opt)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_login_fabric(%ld): entered.\n", ha->host_no);)

        mcp->mb[0] = MBC_LOGIN_FABRIC_PORT;
        mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
        if (HAS_EXTENDED_IDS(ha)) {
                mcp->mb[1] = loop_id;
                mcp->mb[10] = opt;
                mcp->out_mb |= MBX_10;
        } else {
                mcp->mb[1] = (loop_id << 8) | opt;
        }
        mcp->mb[2] = domain;
        mcp->mb[3] = area << 8 | al_pa;

        mcp->in_mb = MBX_7|MBX_6|MBX_2|MBX_1|MBX_0;
        mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2);
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        /* Return mailbox statuses. */
        if (mb != NULL) {
                mb[0] = mcp->mb[0];
                mb[1] = mcp->mb[1];
                mb[2] = mcp->mb[2];
                mb[6] = mcp->mb[6];
                mb[7] = mcp->mb[7];
        }

        if (rval != QLA_SUCCESS) {
                /* RLU tmp code: need to change main mailbox_command function to
                 * return ok even when the mailbox completion value is not
                 * SUCCESS. The caller needs to be responsible to interpret
                 * the return values of this mailbox command if we're not
                 * to change too much of the existing code.
                 */
                if (mcp->mb[0] == 0x4001 || mcp->mb[0] == 0x4002 ||
                    mcp->mb[0] == 0x4003 || mcp->mb[0] == 0x4005 ||
                    mcp->mb[0] == 0x4006)
                        rval = QLA_SUCCESS;

                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_login_fabric(%ld): failed=%x "
                    "mb[0]=%x mb[1]=%x mb[2]=%x.\n", ha->host_no, rval,
                    mcp->mb[0], mcp->mb[1], mcp->mb[2]);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_login_fabric(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_login_local_device
 *           Issue login loop port mailbox command.
 *    
 * Input:
 *           ha = adapter block pointer.
 *           loop_id = device loop ID.
 *           opt = command options.
 *          
 * Returns:
 *            Return status code.
 *             
 * Context:
 *            Kernel context.
 *             
 */
int
qla2x00_login_local_device(scsi_qla_host_t *ha, uint16_t loop_id,
    uint16_t *mb_ret, uint8_t opt)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG3(printk("%s(%ld): entered.\n", __func__, ha->host_no);)

        mcp->mb[0] = MBC_LOGIN_LOOP_PORT;
        if (HAS_EXTENDED_IDS(ha))
                mcp->mb[1] = loop_id;
        else
                mcp->mb[1] = loop_id << 8;
        mcp->mb[2] = opt;
        mcp->out_mb = MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_7|MBX_6|MBX_1|MBX_0;
        mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2);
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        /* Return mailbox statuses. */
        if (mb_ret != NULL) {
                mb_ret[0] = mcp->mb[0];
                mb_ret[1] = mcp->mb[1];
                mb_ret[6] = mcp->mb[6];
                mb_ret[7] = mcp->mb[7];
        }

        if (rval != QLA_SUCCESS) {
                /* AV tmp code: need to change main mailbox_command function to
                 * return ok even when the mailbox completion value is not
                 * SUCCESS. The caller needs to be responsible to interpret
                 * the return values of this mailbox command if we're not
                 * to change too much of the existing code.
                 */
                if (mcp->mb[0] == 0x4005 || mcp->mb[0] == 0x4006)
                        rval = QLA_SUCCESS;

                DEBUG(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
                    "mb[6]=%x mb[7]=%x.\n", __func__, ha->host_no, rval,
                    mcp->mb[0], mcp->mb[1], mcp->mb[6], mcp->mb[7]);)
                DEBUG2_3(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
                    "mb[6]=%x mb[7]=%x.\n", __func__, ha->host_no, rval,
                    mcp->mb[0], mcp->mb[1], mcp->mb[6], mcp->mb[7]);)
        } else {
                /*EMPTY*/
                DEBUG3(printk("%s(%ld): done.\n", __func__, ha->host_no);)
        }

        return (rval);
}

/*
 * qla2x00_fabric_logout
 *      Issue logout fabric port mailbox command.
 *
 * Input:
 *      ha = adapter block pointer.
 *      loop_id = device loop ID.
 *      TARGET_QUEUE_LOCK must be released.
 *      ADAPTER_STATE_LOCK must be released.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_fabric_logout(%ld): entered.\n",
            ha->host_no);)

        mcp->mb[0] = MBC_LOGOUT_FABRIC_PORT;
        mcp->out_mb = MBX_1|MBX_0;
        if (HAS_EXTENDED_IDS(ha)) {
                mcp->mb[1] = loop_id;
                mcp->mb[10] = 0;
                mcp->out_mb |= MBX_10;
        } else {
                mcp->mb[1] = loop_id << 8;
        }

        mcp->in_mb = MBX_1|MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_fabric_logout(%ld): failed=%x "
                    "mbx1=%x.\n", ha->host_no, rval, mcp->mb[1]);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_fabric_logout(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_full_login_lip
 *      Issue full login LIP mailbox command.
 *
 * Input:
 *      ha = adapter block pointer.
 *      TARGET_QUEUE_LOCK must be released.
 *      ADAPTER_STATE_LOCK must be released.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_full_login_lip(scsi_qla_host_t *ha)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n",
            ha->host_no);)

        mcp->mb[0] = MBC_LIP_FULL_LOGIN;
        mcp->mb[1] = 0;
        mcp->mb[2] = 0;
        mcp->mb[3] = 0;
        mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_full_login_lip(%ld): failed=%x.\n",
                    ha->instance, rval);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_full_login_lip(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_get_id_list
 *
 * Input:
 *      ha = adapter block pointer.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_get_id_list(scsi_qla_host_t *ha, void *id_list, dma_addr_t id_list_dma,
    uint16_t *entries)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("qla2x00_get_id_list(%ld): entered.\n",
            ha->host_no);)

        if (id_list == NULL)
                return QLA_FUNCTION_FAILED;

        mcp->mb[0] = MBC_GET_ID_LIST;
        mcp->mb[1] = MSW(id_list_dma);
        mcp->mb[2] = LSW(id_list_dma);
        mcp->mb[3] = MSW(MSD(id_list_dma));
        mcp->mb[6] = LSW(MSD(id_list_dma));
        mcp->out_mb = MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_1|MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("qla2x00_get_id_list(%ld): failed=%x.\n",
                    ha->host_no, rval);)
        } else {
                *entries = mcp->mb[1];
                DEBUG11(printk("qla2x00_get_id_list(%ld): done.\n",
                    ha->host_no);)
        }

        return rval;
}

/*
 * qla2x00_lun_reset
 *      Issue lun reset mailbox command.
 *
 * Input:
 *      ha = adapter block pointer.
 *      loop_id = device loop ID.
 *      lun = lun to be reset.
 *      TARGET_QUEUE_LOCK must be released.
 *      ADAPTER_STATE_LOCK must be released.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_lun_reset(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun)
{
        int             rval;
        mbx_cmd_t       mc;
        mbx_cmd_t       *mcp = &mc;

        mcp->mb[0] = MBC_LUN_RESET;
        if (HAS_EXTENDED_IDS(ha))
                mcp->mb[1] = loop_id;
        else
                mcp->mb[1] = loop_id << 8;
        mcp->mb[2] = lun;
        mcp->out_mb = MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                printk(KERN_WARNING "qla2x00_lun_reset(%d): failed = %d",
                    (int)ha->instance, rval);
        } else {
                /*EMPTY*/
        }

        return rval;
}

/*
 * qla2x00_send_rnid_mbx
 *      Issue RNID ELS using mailbox command
 *
 * Input:
 *      ha = adapter state pointer.
 *      loop_id = loop ID of the target device.
 *      data_fmt = currently supports only 0xDF.
 *      buffer = buffer pointer.
 *      buf_size = size of buffer.
 *      mb_reg = pointer to return mailbox registers.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_send_rnid_mbx(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t data_fmt,
    dma_addr_t buf_phys_addr, size_t buf_size, uint16_t *mb_reg)
{
        int             rval;
        mbx_cmd_t       mc;
        mbx_cmd_t       *mcp = &mc;

        DEBUG11(printk("qla2x00_send_rnid_mbx(%ld): entered.\n",
            ha->host_no);)

        mcp->mb[0] = MBC_SEND_RNID_ELS;
        mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
        if (HAS_EXTENDED_IDS(ha)) {
                mcp->mb[1] = loop_id;
                mcp->mb[10] = data_fmt;
                mcp->out_mb |= MBX_10;
        } else {
                mcp->mb[1] = (loop_id << 8) | data_fmt;
        }
        mcp->mb[2] = MSW(buf_phys_addr);
        mcp->mb[3] = LSW(buf_phys_addr);
        mcp->mb[6] = MSW(MSD(buf_phys_addr));
        mcp->mb[7] = LSW(MSD(buf_phys_addr));

        mcp->in_mb = MBX_1|MBX_0;
        mcp->buf_size = buf_size;
        mcp->flags = MBX_DMA_IN;
        mcp->tov = 30;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                memcpy(mb_reg, mcp->mb, 2 * 2); /* 2 status regs */

                DEBUG2_3_11(printk("qla2x00_send_rnid_mbx(%ld): failed=%x "
                    "mb[1]=%x.\n",
                    ha->host_no, mcp->mb[0], mcp->mb[1]);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_send_rnid_mbx(%ld): done.\n",
                     ha->host_no);)
        }

        return (rval);
}

/*
 * qla2x00_set_rnid_params_mbx
 *      Set RNID parameters using mailbox command
 *
 * Input:
 *      ha = adapter state pointer.
 *      buffer = buffer pointer.
 *      buf_size = size of buffer.
 *      mb_reg = pointer to return mailbox registers.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_set_rnid_params_mbx(scsi_qla_host_t *ha, dma_addr_t buf_phys_addr,
    size_t buf_size, uint16_t *mb_reg)
{
        int             rval;
        mbx_cmd_t       mc;
        mbx_cmd_t       *mcp = &mc;

        DEBUG11(printk("qla2x00_set_rnid_params_mbx(%ld): entered.\n",
            ha->host_no);)

        mcp->mb[0] = MBC_SET_RNID_PARAMS;
        mcp->mb[1] = 0;
        mcp->mb[2] = MSW(buf_phys_addr);
        mcp->mb[3] = LSW(buf_phys_addr);
        mcp->mb[6] = MSW(MSD(buf_phys_addr));
        mcp->mb[7] = LSW(MSD(buf_phys_addr));
        mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_1|MBX_0;
        mcp->buf_size = buf_size;
        mcp->flags = MBX_DMA_OUT;
        mcp->tov = 30;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                memcpy(mb_reg, mcp->mb, 2 * 2); /* 2 status regs */

                DEBUG2_3_11(printk("qla2x00_set_rnid_params_mbx(%ld): "
                    "failed=%x mb[1]=%x.\n", ha->host_no, mcp->mb[0],
                    mcp->mb[1]);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_set_rnid_params_mbx(%ld): done.\n",
                    ha->host_no);)
        }

        return (rval);
}

/*
 * qla2x00_get_rnid_params_mbx
 *      Get RNID parameters using mailbox command
 *
 * Input:
 *      ha = adapter state pointer.
 *      buffer = buffer pointer.
 *      buf_size = size of buffer.
 *      mb_reg = pointer to return mailbox registers.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_get_rnid_params_mbx(scsi_qla_host_t *ha, dma_addr_t buf_phys_addr,
    size_t buf_size, uint16_t *mb_reg)
{
        int             rval;
        mbx_cmd_t       mc;
        mbx_cmd_t       *mcp = &mc;

        DEBUG11(printk("qla2x00_get_rnid_params_mbx(%ld): entered.\n",
            ha->host_no);)

        mcp->mb[0] = MBC_GET_RNID_PARAMS;
        mcp->mb[1] = 0;
        mcp->mb[2] = MSW(buf_phys_addr);
        mcp->mb[3] = LSW(buf_phys_addr);
        mcp->mb[6] = MSW(MSD(buf_phys_addr));
        mcp->mb[7] = LSW(MSD(buf_phys_addr));
        mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_1|MBX_0;
        mcp->buf_size = buf_size;
        mcp->flags = MBX_DMA_IN;
        mcp->tov = 30;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                memcpy(mb_reg, mcp->mb, 2 * 2); /* 2 status regs */

                DEBUG2_3_11(printk("qla2x00_get_rnid_params_mbx(%ld): "
                    "failed=%x mb[1]=%x.\n", ha->host_no, mcp->mb[0],
                    mcp->mb[1]);)
        } else {
                /*EMPTY*/
                DEBUG11(printk("qla2x00_get_rnid_params_mbx(%ld): done.\n",
                    ha->host_no);)
        }

        return (rval);
}

/*
 * qla2x00_get_resource_cnts
 *      Get current firmware resource counts.
 *
 * Input:
 *      ha = adapter block pointer.
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_get_resource_cnts(scsi_qla_host_t *ha, uint16_t *cur_xchg_cnt,
    uint16_t *orig_xchg_cnt, uint16_t *cur_iocb_cnt, uint16_t *orig_iocb_cnt)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;

        DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));

        mcp->mb[0] = MBC_GET_RESOURCE_COUNTS;
        mcp->out_mb = MBX_0;
        mcp->in_mb = MBX_10|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->tov = 30;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval != QLA_SUCCESS) {
                /*EMPTY*/
                DEBUG2_3_11(printk("%s(%ld): failed = %x.\n", __func__,
                    ha->host_no, mcp->mb[0]);)
        } else {
                DEBUG11(printk("%s(%ld): done. mb1=%x mb2=%x mb3=%x mb6=%x "
                    "mb7=%x mb10=%x.\n", __func__, ha->host_no,
                    mcp->mb[1], mcp->mb[2], mcp->mb[3], mcp->mb[6], mcp->mb[7], 
                    mcp->mb[10]));

                if (cur_xchg_cnt)
                        *cur_xchg_cnt = mcp->mb[3];
                if (orig_xchg_cnt)
                        *orig_xchg_cnt = mcp->mb[6];
                if (cur_iocb_cnt)
                        *cur_iocb_cnt = mcp->mb[7];
                if (orig_iocb_cnt)
                        *orig_iocb_cnt = mcp->mb[10];
        }

        return (rval);
}

#if defined(QL_DEBUG_LEVEL_3)
/*
 * qla2x00_get_fcal_position_map
 *      Get FCAL (LILP) position map using mailbox command
 *
 * Input:
 *      ha = adapter state pointer.
 *      pos_map = buffer pointer (can be NULL).
 *
 * Returns:
 *      qla2x00 local function return status code.
 *
 * Context:
 *      Kernel context.
 */
int
qla2x00_get_fcal_position_map(scsi_qla_host_t *ha, char *pos_map)
{
        int rval;
        mbx_cmd_t mc;
        mbx_cmd_t *mcp = &mc;
        char *pmap;
        dma_addr_t pmap_dma;

        pmap = pci_alloc_consistent(ha->pdev, FCAL_MAP_SIZE, &pmap_dma);
        if (pmap  == NULL) {
                DEBUG2_3_11(printk("%s(%ld): **** Mem Alloc Failed ****",
                    __func__, ha->host_no));
                return QLA_MEMORY_ALLOC_FAILED;
        }
        memset(pmap, 0, FCAL_MAP_SIZE);

        mcp->mb[0] = MBC_GET_FC_AL_POSITION_MAP;
        mcp->mb[2] = MSW(pmap_dma);
        mcp->mb[3] = LSW(pmap_dma);
        mcp->mb[6] = MSW(MSD(pmap_dma));
        mcp->mb[7] = LSW(MSD(pmap_dma));
        mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_0;
        mcp->in_mb = MBX_1|MBX_0;
        mcp->buf_size = FCAL_MAP_SIZE;
        mcp->flags = MBX_DMA_IN;
        mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2);
        rval = qla2x00_mailbox_command(ha, mcp);

        if (rval == QLA_SUCCESS) {
                DEBUG11(printk("%s(%ld): (mb0=%x/mb1=%x) FC/AL Position Map "
                    "size (%x)\n", __func__, ha->host_no, mcp->mb[0],
                    mcp->mb[1], (unsigned)pmap[0]));
                DEBUG11(qla2x00_dump_buffer(pmap, pmap[0] + 1));

                if (pos_map)
                        memcpy(pos_map, pmap, FCAL_MAP_SIZE);
        }
        pci_free_consistent(ha->pdev, FCAL_MAP_SIZE, pmap, pmap_dma);

        if (rval != QLA_SUCCESS) {
                DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
                    ha->host_no, rval));
        } else {
                DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
        }

        return rval;
}
#endif