drivers/scsi/qla2xxx/qla_sup.c

   1 /*
   2  * QLogic Fibre Channel HBA Driver
   3  * Copyright (c)  2003-2005 QLogic Corporation
   4  *
   5  * See LICENSE.qla2xxx for copyright and licensing details.
   6  */
   7 #include "qla_def.h"
   8
   9 #include <linux/delay.h>
  10 #include <asm/uaccess.h>
  11
  12 static uint16_t qla2x00_nvram_request(scsi_qla_host_t *, uint32_t);
  13 static void qla2x00_nv_deselect(scsi_qla_host_t *);
  14 static void qla2x00_nv_write(scsi_qla_host_t *, uint16_t);
  15
  16 /*
  17  * NVRAM support routines
  18  */
  19
  20 /**
  21  * qla2x00_lock_nvram_access() -
  22  * @ha: HA context
  23  */
  24 void
  25 qla2x00_lock_nvram_access(scsi_qla_host_t *ha)
  26 {
  27         uint16_t data;
  28         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
  29
  30         if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
  31                 data = RD_REG_WORD(&reg->nvram);
  32                 while (data & NVR_BUSY) {
  33                         udelay(100);
  34                         data = RD_REG_WORD(&reg->nvram);
  35                 }
  36
  37                 /* Lock resource */
  38                 WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0x1);
  39                 RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  40                 udelay(5);
  41                 data = RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  42                 while ((data & BIT_0) == 0) {
  43                         /* Lock failed */
  44                         udelay(100);
  45                         WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0x1);
  46                         RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  47                         udelay(5);
  48                         data = RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  49                 }
  50         }
  51 }
  52
  53 /**
  54  * qla2x00_unlock_nvram_access() -
  55  * @ha: HA context
  56  */
  57 void
  58 qla2x00_unlock_nvram_access(scsi_qla_host_t *ha)
  59 {
  60         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
  61
  62         if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
  63                 WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0);
  64                 RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  65         }
  66 }
  67
  68 /**
  69  * qla2x00_get_nvram_word() - Calculates word position in NVRAM and calls the
  70  *      request routine to get the word from NVRAM.
  71  * @ha: HA context
  72  * @addr: Address in NVRAM to read
  73  *
  74  * Returns the word read from nvram @addr.
  75  */
  76 uint16_t
  77 qla2x00_get_nvram_word(scsi_qla_host_t *ha, uint32_t addr)
  78 {
  79         uint16_t        data;
  80         uint32_t        nv_cmd;
  81
  82         nv_cmd = addr << 16;
  83         nv_cmd |= NV_READ_OP;
  84         data = qla2x00_nvram_request(ha, nv_cmd);
  85
  86         return (data);
  87 }
  88
  89 /**
  90  * qla2x00_write_nvram_word() - Write NVRAM data.
  91  * @ha: HA context
  92  * @addr: Address in NVRAM to write
  93  * @data: word to program
  94  */
  95 void
  96 qla2x00_write_nvram_word(scsi_qla_host_t *ha, uint32_t addr, uint16_t data)
  97 {
  98         int count;
  99         uint16_t word;
 100         uint32_t nv_cmd, wait_cnt;
 101         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 102
 103         qla2x00_nv_write(ha, NVR_DATA_OUT);
 104         qla2x00_nv_write(ha, 0);
 105         qla2x00_nv_write(ha, 0);
 106
 107         for (word = 0; word < 8; word++)
 108                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 109
 110         qla2x00_nv_deselect(ha);
 111
 112         /* Write data */
 113         nv_cmd = (addr << 16) | NV_WRITE_OP;
 114         nv_cmd |= data;
 115         nv_cmd <<= 5;
 116         for (count = 0; count < 27; count++) {
 117                 if (nv_cmd & BIT_31)
 118                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 119                 else
 120                         qla2x00_nv_write(ha, 0);
 121
 122                 nv_cmd <<= 1;
 123         }
 124
 125         qla2x00_nv_deselect(ha);
 126
 127         /* Wait for NVRAM to become ready */
 128         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 129         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 130         wait_cnt = NVR_WAIT_CNT;
 131         do {
 132                 if (!--wait_cnt) {
 133                         DEBUG9_10(printk("%s(%ld): NVRAM didn't go ready...\n",
 134                             __func__, ha->host_no));
 135                         break;
 136                 }
 137                 NVRAM_DELAY();
 138                 word = RD_REG_WORD(&reg->nvram);
 139         } while ((word & NVR_DATA_IN) == 0);
 140
 141         qla2x00_nv_deselect(ha);
 142
 143         /* Disable writes */
 144         qla2x00_nv_write(ha, NVR_DATA_OUT);
 145         for (count = 0; count < 10; count++)
 146                 qla2x00_nv_write(ha, 0);
 147
 148         qla2x00_nv_deselect(ha);
 149 }
 150
 151 static int
 152 qla2x00_write_nvram_word_tmo(scsi_qla_host_t *ha, uint32_t addr, uint16_t data,
 153     uint32_t tmo)
 154 {
 155         int ret, count;
 156         uint16_t word;
 157         uint32_t nv_cmd;
 158         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 159
 160         ret = QLA_SUCCESS;
 161
 162         qla2x00_nv_write(ha, NVR_DATA_OUT);
 163         qla2x00_nv_write(ha, 0);
 164         qla2x00_nv_write(ha, 0);
 165
 166         for (word = 0; word < 8; word++)
 167                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 168
 169         qla2x00_nv_deselect(ha);
 170
 171         /* Write data */
 172         nv_cmd = (addr << 16) | NV_WRITE_OP;
 173         nv_cmd |= data;
 174         nv_cmd <<= 5;
 175         for (count = 0; count < 27; count++) {
 176                 if (nv_cmd & BIT_31)
 177                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 178                 else
 179                         qla2x00_nv_write(ha, 0);
 180
 181                 nv_cmd <<= 1;
 182         }
 183
 184         qla2x00_nv_deselect(ha);
 185
 186         /* Wait for NVRAM to become ready */
 187         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 188         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 189         do {
 190                 NVRAM_DELAY();
 191                 word = RD_REG_WORD(&reg->nvram);
 192                 if (!--tmo) {
 193                         ret = QLA_FUNCTION_FAILED;
 194                         break;
 195                 }
 196         } while ((word & NVR_DATA_IN) == 0);
 197
 198         qla2x00_nv_deselect(ha);
 199
 200         /* Disable writes */
 201         qla2x00_nv_write(ha, NVR_DATA_OUT);
 202         for (count = 0; count < 10; count++)
 203                 qla2x00_nv_write(ha, 0);
 204
 205         qla2x00_nv_deselect(ha);
 206
 207         return ret;
 208 }
 209
 210 /**
 211  * qla2x00_nvram_request() - Sends read command to NVRAM and gets data from
 212  *      NVRAM.
 213  * @ha: HA context
 214  * @nv_cmd: NVRAM command
 215  *
 216  * Bit definitions for NVRAM command:
 217  *
 218  *      Bit 26     = start bit
 219  *      Bit 25, 24 = opcode
 220  *      Bit 23-16  = address
 221  *      Bit 15-0   = write data
 222  *
 223  * Returns the word read from nvram @addr.
 224  */
 225 static uint16_t
 226 qla2x00_nvram_request(scsi_qla_host_t *ha, uint32_t nv_cmd)
 227 {
 228         uint8_t         cnt;
 229         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 230         uint16_t        data = 0;
 231         uint16_t        reg_data;
 232
 233         /* Send command to NVRAM. */
 234         nv_cmd <<= 5;
 235         for (cnt = 0; cnt < 11; cnt++) {
 236                 if (nv_cmd & BIT_31)
 237                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 238                 else
 239                         qla2x00_nv_write(ha, 0);
 240                 nv_cmd <<= 1;
 241         }
 242
 243         /* Read data from NVRAM. */
 244         for (cnt = 0; cnt < 16; cnt++) {
 245                 WRT_REG_WORD(&reg->nvram, NVR_SELECT | NVR_CLOCK);
 246                 RD_REG_WORD(&reg->nvram);       /* PCI Posting. */
 247                 NVRAM_DELAY();
 248                 data <<= 1;
 249                 reg_data = RD_REG_WORD(&reg->nvram);
 250                 if (reg_data & NVR_DATA_IN)
 251                         data |= BIT_0;
 252                 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 253                 RD_REG_WORD(&reg->nvram);       /* PCI Posting. */
 254                 NVRAM_DELAY();
 255         }
 256
 257         /* Deselect chip. */
 258         WRT_REG_WORD(&reg->nvram, NVR_DESELECT);
 259         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 260         NVRAM_DELAY();
 261
 262         return (data);
 263 }
 264
 265 /**
 266  * qla2x00_nv_write() - Clean NVRAM operations.
 267  * @ha: HA context
 268  */
 269 static void
 270 qla2x00_nv_deselect(scsi_qla_host_t *ha)
 271 {
 272         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 273
 274         WRT_REG_WORD(&reg->nvram, NVR_DESELECT);
 275         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 276         NVRAM_DELAY();
 277 }
 278
 279 /**
 280  * qla2x00_nv_write() - Prepare for NVRAM read/write operation.
 281  * @ha: HA context
 282  * @data: Serial interface selector
 283  */
 284 static void
 285 qla2x00_nv_write(scsi_qla_host_t *ha, uint16_t data)
 286 {
 287         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 288
 289         WRT_REG_WORD(&reg->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
 290         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 291         NVRAM_DELAY();
 292         WRT_REG_WORD(&reg->nvram, data | NVR_SELECT| NVR_CLOCK |
 293             NVR_WRT_ENABLE);
 294         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 295         NVRAM_DELAY();
 296         WRT_REG_WORD(&reg->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
 297         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 298         NVRAM_DELAY();
 299 }
 300
 301 /**
 302  * qla2x00_clear_nvram_protection() -
 303  * @ha: HA context
 304  */
 305 static int
 306 qla2x00_clear_nvram_protection(scsi_qla_host_t *ha)
 307 {
 308         int ret, stat;
 309         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 310         uint32_t word, wait_cnt;
 311         uint16_t wprot, wprot_old;
 312
 313         /* Clear NVRAM write protection. */
 314         ret = QLA_FUNCTION_FAILED;
 315
 316         wprot_old = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base));
 317         stat = qla2x00_write_nvram_word_tmo(ha, ha->nvram_base,
 318             __constant_cpu_to_le16(0x1234), 100000);
 319         wprot = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base));
 320         if (stat != QLA_SUCCESS || wprot != 0x1234) {
 321                 /* Write enable. */
 322                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 323                 qla2x00_nv_write(ha, 0);
 324                 qla2x00_nv_write(ha, 0);
 325                 for (word = 0; word < 8; word++)
 326                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 327
 328                 qla2x00_nv_deselect(ha);
 329
 330                 /* Enable protection register. */
 331                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 332                 qla2x00_nv_write(ha, NVR_PR_ENABLE);
 333                 qla2x00_nv_write(ha, NVR_PR_ENABLE);
 334                 for (word = 0; word < 8; word++)
 335                         qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
 336
 337                 qla2x00_nv_deselect(ha);
 338
 339                 /* Clear protection register (ffff is cleared). */
 340                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 341                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 342                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 343                 for (word = 0; word < 8; word++)
 344                         qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
 345
 346                 qla2x00_nv_deselect(ha);
 347
 348                 /* Wait for NVRAM to become ready. */
 349                 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 350                 RD_REG_WORD(&reg->nvram);       /* PCI Posting. */
 351                 wait_cnt = NVR_WAIT_CNT;
 352                 do {
 353                         if (!--wait_cnt) {
 354                                 DEBUG9_10(printk("%s(%ld): NVRAM didn't go "
 355                                     "ready...\n", __func__,
 356                                     ha->host_no));
 357                                 break;
 358                         }
 359                         NVRAM_DELAY();
 360                         word = RD_REG_WORD(&reg->nvram);
 361                 } while ((word & NVR_DATA_IN) == 0);
 362
 363                 if (wait_cnt)
 364                         ret = QLA_SUCCESS;
 365         } else
 366                 qla2x00_write_nvram_word(ha, ha->nvram_base, wprot_old);
 367
 368         return ret;
 369 }
 370
 371 static void
 372 qla2x00_set_nvram_protection(scsi_qla_host_t *ha, int stat)
 373 {
 374         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 375         uint32_t word, wait_cnt;
 376
 377         if (stat != QLA_SUCCESS)
 378                 return;
 379
 380         /* Set NVRAM write protection. */
 381         /* Write enable. */
 382         qla2x00_nv_write(ha, NVR_DATA_OUT);
 383         qla2x00_nv_write(ha, 0);
 384         qla2x00_nv_write(ha, 0);
 385         for (word = 0; word < 8; word++)
 386                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 387
 388         qla2x00_nv_deselect(ha);
 389
 390         /* Enable protection register. */
 391         qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 392         qla2x00_nv_write(ha, NVR_PR_ENABLE);
 393         qla2x00_nv_write(ha, NVR_PR_ENABLE);
 394         for (word = 0; word < 8; word++)
 395                 qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
 396
 397         qla2x00_nv_deselect(ha);
 398
 399         /* Enable protection register. */
 400         qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 401         qla2x00_nv_write(ha, NVR_PR_ENABLE);
 402         qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 403         for (word = 0; word < 8; word++)
 404                 qla2x00_nv_write(ha, NVR_PR_ENABLE);
 405
 406         qla2x00_nv_deselect(ha);
 407
 408         /* Wait for NVRAM to become ready. */
 409         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 410         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 411         wait_cnt = NVR_WAIT_CNT;
 412         do {
 413                 if (!--wait_cnt) {
 414                         DEBUG9_10(printk("%s(%ld): NVRAM didn't go ready...\n",
 415                             __func__, ha->host_no));
 416                         break;
 417                 }
 418                 NVRAM_DELAY();
 419                 word = RD_REG_WORD(&reg->nvram);
 420         } while ((word & NVR_DATA_IN) == 0);
 421 }
 422
 423
 424 /*****************************************************************************/
 425 /* Flash Manipulation Routines                                               */
 426 /*****************************************************************************/
 427
 428 static inline uint32_t
 429 flash_conf_to_access_addr(uint32_t faddr)
 430 {
 431         return FARX_ACCESS_FLASH_CONF | faddr;
 432 }
 433
 434 static inline uint32_t
 435 flash_data_to_access_addr(uint32_t faddr)
 436 {
 437         return FARX_ACCESS_FLASH_DATA | faddr;
 438 }
 439
 440 static inline uint32_t
 441 nvram_conf_to_access_addr(uint32_t naddr)
 442 {
 443         return FARX_ACCESS_NVRAM_CONF | naddr;
 444 }
 445
 446 static inline uint32_t
 447 nvram_data_to_access_addr(uint32_t naddr)
 448 {
 449         return FARX_ACCESS_NVRAM_DATA | naddr;
 450 }
 451
 452 uint32_t
 453 qla24xx_read_flash_dword(scsi_qla_host_t *ha, uint32_t addr)
 454 {
 455         int rval;
 456         uint32_t cnt, data;
 457         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 458
 459         WRT_REG_DWORD(&reg->flash_addr, addr & ~FARX_DATA_FLAG);
 460         /* Wait for READ cycle to complete. */
 461         rval = QLA_SUCCESS;
 462         for (cnt = 3000;
 463             (RD_REG_DWORD(&reg->flash_addr) & FARX_DATA_FLAG) == 0 &&
 464             rval == QLA_SUCCESS; cnt--) {
 465                 if (cnt)
 466                         udelay(10);
 467                 else
 468                         rval = QLA_FUNCTION_TIMEOUT;
 469         }
 470
 471         /* TODO: What happens if we time out? */
 472         data = 0xDEADDEAD;
 473         if (rval == QLA_SUCCESS)
 474                 data = RD_REG_DWORD(&reg->flash_data);
 475
 476         return data;
 477 }
 478
 479 uint32_t *
 480 qla24xx_read_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
 481     uint32_t dwords)
 482 {
 483         uint32_t i;
 484
 485         /* Dword reads to flash. */
 486         for (i = 0; i < dwords; i++, faddr++)
 487                 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
 488                     flash_data_to_access_addr(faddr)));
 489
 490         return dwptr;
 491 }
 492
 493 int
 494 qla24xx_write_flash_dword(scsi_qla_host_t *ha, uint32_t addr, uint32_t data)
 495 {
 496         int rval;
 497         uint32_t cnt;
 498         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 499
 500         WRT_REG_DWORD(&reg->flash_data, data);
 501         RD_REG_DWORD(&reg->flash_data);         /* PCI Posting. */
 502         WRT_REG_DWORD(&reg->flash_addr, addr | FARX_DATA_FLAG);
 503         /* Wait for Write cycle to complete. */
 504         rval = QLA_SUCCESS;
 505         for (cnt = 500000; (RD_REG_DWORD(&reg->flash_addr) & FARX_DATA_FLAG) &&
 506             rval == QLA_SUCCESS; cnt--) {
 507                 if (cnt)
 508                         udelay(10);
 509                 else
 510                         rval = QLA_FUNCTION_TIMEOUT;
 511         }
 512         return rval;
 513 }
 514
 515 void
 516 qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
 517     uint8_t *flash_id)
 518 {
 519         uint32_t ids;
 520
 521         ids = qla24xx_read_flash_dword(ha, flash_data_to_access_addr(0xd03ab));
 522         *man_id = LSB(ids);
 523         *flash_id = MSB(ids);
 524
 525         /* Check if man_id and flash_id are valid. */
 526         if (ids != 0xDEADDEAD && (*man_id == 0 || *flash_id == 0)) {
 527                 /* Read information using 0x9f opcode
 528                  * Device ID, Mfg ID would be read in the format:
 529                  *   <Ext Dev Info><Device ID Part2><Device ID Part 1><Mfg ID>
 530                  * Example: ATMEL 0x00 01 45 1F
 531                  * Extract MFG and Dev ID from last two bytes.
 532                  */
 533                 ids = qla24xx_read_flash_dword(ha,
 534                     flash_data_to_access_addr(0xd009f));
 535                 *man_id = LSB(ids);
 536                 *flash_id = MSB(ids);
 537         }
 538 }
 539
 540 int
 541 qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
 542     uint32_t dwords)
 543 {
 544         int ret;
 545         uint32_t liter;
 546         uint32_t sec_mask, rest_addr, conf_addr, sec_end_mask;
 547         uint32_t fdata, findex ;
 548         uint8_t man_id, flash_id;
 549         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 550
 551         ret = QLA_SUCCESS;
 552
 553         qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
 554         DEBUG9(printk("%s(%ld): Flash man_id=%d flash_id=%d\n", __func__,
 555             ha->host_no, man_id, flash_id));
 556
 557         sec_end_mask = 0;
 558         conf_addr = flash_conf_to_access_addr(0x03d8);
 559         switch (man_id) {
 560         case 0xbf: /* STT flash. */
 561                 rest_addr = 0x1fff;
 562                 sec_mask = 0x3e000;
 563                 if (flash_id == 0x80)
 564                         conf_addr = flash_conf_to_access_addr(0x0352);
 565                 break;
 566         case 0x13: /* ST M25P80. */
 567                 rest_addr = 0x3fff;
 568                 sec_mask = 0x3c000;
 569                 break;
 570         case 0x1f: // Atmel 26DF081A
 571                 rest_addr = 0x0fff;
 572                 sec_mask = 0xff000;
 573                 sec_end_mask = 0x003ff;
 574                 conf_addr = flash_conf_to_access_addr(0x0320);
 575                 break;
 576         default:
 577                 /* Default to 64 kb sector size. */
 578                 rest_addr = 0x3fff;
 579                 sec_mask = 0x3c000;
 580                 break;
 581         }
 582
 583         /* Enable flash write. */
 584         WRT_REG_DWORD(&reg->ctrl_status,
 585             RD_REG_DWORD(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
 586         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 587
 588         /* Disable flash write-protection. */
 589         qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0);
 590         /* Some flash parts need an additional zero-write to clear bits.*/
 591         qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0);
 592
 593         do {    /* Loop once to provide quick error exit. */
 594                 for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
 595                         if (man_id == 0x1f) {
 596                                 findex = faddr << 2;
 597                                 fdata = findex & sec_mask;
 598                         } else {
 599                                 findex = faddr;
 600                                 fdata = (findex & sec_mask) << 2;
 601                         }
 602
 603                         /* Are we at the beginning of a sector? */
 604                         if ((findex & rest_addr) == 0) {
 605                                 /*
 606                                  * Do sector unprotect at 4K boundry for Atmel
 607                                  * part.
 608                                  */
 609                                 if (man_id == 0x1f)
 610                                         qla24xx_write_flash_dword(ha,
 611                                             flash_conf_to_access_addr(0x0339),
 612                                             (fdata & 0xff00) | ((fdata << 16) &
 613                                             0xff0000) | ((fdata >> 16) & 0xff));
 614                                 fdata = (faddr & sec_mask) << 2;
 615                                 ret = qla24xx_write_flash_dword(ha, conf_addr,
 616                                     (fdata & 0xff00) |((fdata << 16) &
 617                                     0xff0000) | ((fdata >> 16) & 0xff));
 618                                 if (ret != QLA_SUCCESS) {
 619                                         DEBUG9(printk("%s(%ld) Unable to flash "
 620                                             "sector: address=%x.\n", __func__,
 621                                             ha->host_no, faddr));
 622                                         break;
 623                                 }
 624                         }
 625                         ret = qla24xx_write_flash_dword(ha,
 626                             flash_data_to_access_addr(faddr),
 627                             cpu_to_le32(*dwptr));
 628                         if (ret != QLA_SUCCESS) {
 629                                 DEBUG9(printk("%s(%ld) Unable to program flash "
 630                                     "address=%x data=%x.\n", __func__,
 631                                     ha->host_no, faddr, *dwptr));
 632                                 break;
 633                         }
 634
 635                         /* Do sector protect at 4K boundry for Atmel part. */
 636                         if (man_id == 0x1f &&
 637                             ((faddr & sec_end_mask) == 0x3ff))
 638                                 qla24xx_write_flash_dword(ha,
 639                                     flash_conf_to_access_addr(0x0336),
 640                                     (fdata & 0xff00) | ((fdata << 16) &
 641                                     0xff0000) | ((fdata >> 16) & 0xff));
 642                 }
 643         } while (0);
 644
 645         /* Enable flash write-protection. */
 646         qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0x9c);
 647
 648         /* Disable flash write. */
 649         WRT_REG_DWORD(&reg->ctrl_status,
 650             RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
 651         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 652
 653         return ret;
 654 }
 655
 656 uint8_t *
 657 qla2x00_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 658     uint32_t bytes)
 659 {
 660         uint32_t i;
 661         uint16_t *wptr;
 662
 663         /* Word reads to NVRAM via registers. */
 664         wptr = (uint16_t *)buf;
 665         qla2x00_lock_nvram_access(ha);
 666         for (i = 0; i < bytes >> 1; i++, naddr++)
 667                 wptr[i] = cpu_to_le16(qla2x00_get_nvram_word(ha,
 668                     naddr));
 669         qla2x00_unlock_nvram_access(ha);
 670
 671         return buf;
 672 }
 673
 674 uint8_t *
 675 qla24xx_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 676     uint32_t bytes)
 677 {
 678         uint32_t i;
 679         uint32_t *dwptr;
 680
 681         /* Dword reads to flash. */
 682         dwptr = (uint32_t *)buf;
 683         for (i = 0; i < bytes >> 2; i++, naddr++)
 684                 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
 685                     nvram_data_to_access_addr(naddr)));
 686
 687         return buf;
 688 }
 689
 690 int
 691 qla2x00_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 692     uint32_t bytes)
 693 {
 694         int ret, stat;
 695         uint32_t i;
 696         uint16_t *wptr;
 697
 698         ret = QLA_SUCCESS;
 699
 700         qla2x00_lock_nvram_access(ha);
 701
 702         /* Disable NVRAM write-protection. */
 703         stat = qla2x00_clear_nvram_protection(ha);
 704
 705         wptr = (uint16_t *)buf;
 706         for (i = 0; i < bytes >> 1; i++, naddr++) {
 707                 qla2x00_write_nvram_word(ha, naddr,
 708                     cpu_to_le16(*wptr));
 709                 wptr++;
 710         }
 711
 712         /* Enable NVRAM write-protection. */
 713         qla2x00_set_nvram_protection(ha, stat);
 714
 715         qla2x00_unlock_nvram_access(ha);
 716
 717         return ret;
 718 }
 719
 720 int
 721 qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 722     uint32_t bytes)
 723 {
 724         int ret;
 725         uint32_t i;
 726         uint32_t *dwptr;
 727         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 728
 729         ret = QLA_SUCCESS;
 730
 731         /* Enable flash write. */
 732         WRT_REG_DWORD(&reg->ctrl_status,
 733             RD_REG_DWORD(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
 734         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 735
 736         /* Disable NVRAM write-protection. */
 737         qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
 738             0);
 739         qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
 740             0);
 741
 742         /* Dword writes to flash. */
 743         dwptr = (uint32_t *)buf;
 744         for (i = 0; i < bytes >> 2; i++, naddr++, dwptr++) {
 745                 ret = qla24xx_write_flash_dword(ha,
 746                     nvram_data_to_access_addr(naddr),
 747                     cpu_to_le32(*dwptr));
 748                 if (ret != QLA_SUCCESS) {
 749                         DEBUG9(printk("%s(%ld) Unable to program "
 750                             "nvram address=%x data=%x.\n", __func__,
 751                             ha->host_no, naddr, *dwptr));
 752                         break;
 753                 }
 754         }
 755
 756         /* Enable NVRAM write-protection. */
 757         qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
 758             0x8c);
 759
 760         /* Disable flash write. */
 761         WRT_REG_DWORD(&reg->ctrl_status,
 762             RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
 763         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 764
 765         return ret;
 766 }
 767
 768
 769 static inline void
 770 qla2x00_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags)
 771 {
 772         if (IS_QLA2322(ha)) {
 773                 /* Flip all colors. */
 774                 if (ha->beacon_color_state == QLA_LED_ALL_ON) {
 775                         /* Turn off. */
 776                         ha->beacon_color_state = 0;
 777                         *pflags = GPIO_LED_ALL_OFF;
 778                 } else {
 779                         /* Turn on. */
 780                         ha->beacon_color_state = QLA_LED_ALL_ON;
 781                         *pflags = GPIO_LED_RGA_ON;
 782                 }
 783         } else {
 784                 /* Flip green led only. */
 785                 if (ha->beacon_color_state == QLA_LED_GRN_ON) {
 786                         /* Turn off. */
 787                         ha->beacon_color_state = 0;
 788                         *pflags = GPIO_LED_GREEN_OFF_AMBER_OFF;
 789                 } else {
 790                         /* Turn on. */
 791                         ha->beacon_color_state = QLA_LED_GRN_ON;
 792                         *pflags = GPIO_LED_GREEN_ON_AMBER_OFF;
 793                 }
 794         }
 795 }
 796
 797 void
 798 qla2x00_beacon_blink(struct scsi_qla_host *ha)
 799 {
 800         uint16_t gpio_enable;
 801         uint16_t gpio_data;
 802         uint16_t led_color = 0;
 803         unsigned long flags;
 804         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 805
 806         if (ha->pio_address)
 807                 reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
 808
 809         spin_lock_irqsave(&ha->hardware_lock, flags);
 810
 811         /* Save the Original GPIOE. */
 812         if (ha->pio_address) {
 813                 gpio_enable = RD_REG_WORD_PIO(&reg->gpioe);
 814                 gpio_data = RD_REG_WORD_PIO(&reg->gpiod);
 815         } else {
 816                 gpio_enable = RD_REG_WORD(&reg->gpioe);
 817                 gpio_data = RD_REG_WORD(&reg->gpiod);
 818         }
 819
 820         /* Set the modified gpio_enable values */
 821         gpio_enable |= GPIO_LED_MASK;
 822
 823         if (ha->pio_address) {
 824                 WRT_REG_WORD_PIO(&reg->gpioe, gpio_enable);
 825         } else {
 826                 WRT_REG_WORD(&reg->gpioe, gpio_enable);
 827                 RD_REG_WORD(&reg->gpioe);
 828         }
 829
 830         qla2x00_flip_colors(ha, &led_color);
 831
 832         /* Clear out any previously set LED color. */
 833         gpio_data &= ~GPIO_LED_MASK;
 834
 835         /* Set the new input LED color to GPIOD. */
 836         gpio_data |= led_color;
 837
 838         /* Set the modified gpio_data values */
 839         if (ha->pio_address) {
 840                 WRT_REG_WORD_PIO(&reg->gpiod, gpio_data);
 841         } else {
 842                 WRT_REG_WORD(&reg->gpiod, gpio_data);
 843                 RD_REG_WORD(&reg->gpiod);
 844         }
 845
 846         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 847 }
 848
 849 int
 850 qla2x00_beacon_on(struct scsi_qla_host *ha)
 851 {
 852         uint16_t gpio_enable;
 853         uint16_t gpio_data;
 854         unsigned long flags;
 855         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 856
 857         ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
 858         ha->fw_options[1] |= FO1_DISABLE_GPIO6_7;
 859
 860         if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
 861                 qla_printk(KERN_WARNING, ha,
 862                     "Unable to update fw options (beacon on).\n");
 863                 return QLA_FUNCTION_FAILED;
 864         }
 865
 866         if (ha->pio_address)
 867                 reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
 868
 869         /* Turn off LEDs. */
 870         spin_lock_irqsave(&ha->hardware_lock, flags);
 871         if (ha->pio_address) {
 872                 gpio_enable = RD_REG_WORD_PIO(&reg->gpioe);
 873                 gpio_data = RD_REG_WORD_PIO(&reg->gpiod);
 874         } else {
 875                 gpio_enable = RD_REG_WORD(&reg->gpioe);
 876                 gpio_data = RD_REG_WORD(&reg->gpiod);
 877         }
 878         gpio_enable |= GPIO_LED_MASK;
 879
 880         /* Set the modified gpio_enable values. */
 881         if (ha->pio_address) {
 882                 WRT_REG_WORD_PIO(&reg->gpioe, gpio_enable);
 883         } else {
 884                 WRT_REG_WORD(&reg->gpioe, gpio_enable);
 885                 RD_REG_WORD(&reg->gpioe);
 886         }
 887
 888         /* Clear out previously set LED colour. */
 889         gpio_data &= ~GPIO_LED_MASK;
 890         if (ha->pio_address) {
 891                 WRT_REG_WORD_PIO(&reg->gpiod, gpio_data);
 892         } else {
 893                 WRT_REG_WORD(&reg->gpiod, gpio_data);
 894                 RD_REG_WORD(&reg->gpiod);
 895         }
 896         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 897
 898         /*
 899          * Let the per HBA timer kick off the blinking process based on
 900          * the following flags. No need to do anything else now.
 901          */
 902         ha->beacon_blink_led = 1;
 903         ha->beacon_color_state = 0;
 904
 905         return QLA_SUCCESS;
 906 }
 907
 908 int
 909 qla2x00_beacon_off(struct scsi_qla_host *ha)
 910 {
 911         int rval = QLA_SUCCESS;
 912
 913         ha->beacon_blink_led = 0;
 914
 915         /* Set the on flag so when it gets flipped it will be off. */
 916         if (IS_QLA2322(ha))
 917                 ha->beacon_color_state = QLA_LED_ALL_ON;
 918         else
 919                 ha->beacon_color_state = QLA_LED_GRN_ON;
 920
 921         ha->isp_ops.beacon_blink(ha);   /* This turns green LED off */
 922
 923         ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
 924         ha->fw_options[1] &= ~FO1_DISABLE_GPIO6_7;
 925
 926         rval = qla2x00_set_fw_options(ha, ha->fw_options);
 927         if (rval != QLA_SUCCESS)
 928                 qla_printk(KERN_WARNING, ha,
 929                     "Unable to update fw options (beacon off).\n");
 930         return rval;
 931 }
 932
 933
 934 static inline void
 935 qla24xx_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags)
 936 {
 937         /* Flip all colors. */
 938         if (ha->beacon_color_state == QLA_LED_ALL_ON) {
 939                 /* Turn off. */
 940                 ha->beacon_color_state = 0;
 941                 *pflags = 0;
 942         } else {
 943                 /* Turn on. */
 944                 ha->beacon_color_state = QLA_LED_ALL_ON;
 945                 *pflags = GPDX_LED_YELLOW_ON | GPDX_LED_AMBER_ON;
 946         }
 947 }
 948
 949 void
 950 qla24xx_beacon_blink(struct scsi_qla_host *ha)
 951 {
 952         uint16_t led_color = 0;
 953         uint32_t gpio_data;
 954         unsigned long flags;
 955         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 956
 957         /* Save the Original GPIOD. */
 958         spin_lock_irqsave(&ha->hardware_lock, flags);
 959         gpio_data = RD_REG_DWORD(&reg->gpiod);
 960
 961         /* Enable the gpio_data reg for update. */
 962         gpio_data |= GPDX_LED_UPDATE_MASK;
 963
 964         WRT_REG_DWORD(&reg->gpiod, gpio_data);
 965         gpio_data = RD_REG_DWORD(&reg->gpiod);
 966
 967         /* Set the color bits. */
 968         qla24xx_flip_colors(ha, &led_color);
 969
 970         /* Clear out any previously set LED color. */
 971         gpio_data &= ~GPDX_LED_COLOR_MASK;
 972
 973         /* Set the new input LED color to GPIOD. */
 974         gpio_data |= led_color;
 975
 976         /* Set the modified gpio_data values. */
 977         WRT_REG_DWORD(&reg->gpiod, gpio_data);
 978         gpio_data = RD_REG_DWORD(&reg->gpiod);
 979         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 980 }
 981
 982 int
 983 qla24xx_beacon_on(struct scsi_qla_host *ha)
 984 {
 985         uint32_t gpio_data;
 986         unsigned long flags;
 987         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 988
 989         if (ha->beacon_blink_led == 0) {
 990                 /* Enable firmware for update */
 991                 ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL;
 992
 993                 if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS)
 994                         return QLA_FUNCTION_FAILED;
 995
 996                 if (qla2x00_get_fw_options(ha, ha->fw_options) !=
 997                     QLA_SUCCESS) {
 998                         qla_printk(KERN_WARNING, ha,
 999                             "Unable to update fw options (beacon on).\n");
1000                         return QLA_FUNCTION_FAILED;
1001                 }
1002
1003                 spin_lock_irqsave(&ha->hardware_lock, flags);
1004                 gpio_data = RD_REG_DWORD(&reg->gpiod);
1005
1006                 /* Enable the gpio_data reg for update. */
1007                 gpio_data |= GPDX_LED_UPDATE_MASK;
1008                 WRT_REG_DWORD(&reg->gpiod, gpio_data);
1009                 RD_REG_DWORD(&reg->gpiod);
1010
1011                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1012         }
1013
1014         /* So all colors blink together. */
1015         ha->beacon_color_state = 0;
1016
1017         /* Let the per HBA timer kick off the blinking process. */
1018         ha->beacon_blink_led = 1;
1019
1020         return QLA_SUCCESS;
1021 }
1022
1023 int
1024 qla24xx_beacon_off(struct scsi_qla_host *ha)
1025 {
1026         uint32_t gpio_data;
1027         unsigned long flags;
1028         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1029
1030         ha->beacon_blink_led = 0;
1031         ha->beacon_color_state = QLA_LED_ALL_ON;
1032
1033         ha->isp_ops.beacon_blink(ha);   /* Will flip to all off. */
1034
1035         /* Give control back to firmware. */
1036         spin_lock_irqsave(&ha->hardware_lock, flags);
1037         gpio_data = RD_REG_DWORD(&reg->gpiod);
1038
1039         /* Disable the gpio_data reg for update. */
1040         gpio_data &= ~GPDX_LED_UPDATE_MASK;
1041         WRT_REG_DWORD(&reg->gpiod, gpio_data);
1042         RD_REG_DWORD(&reg->gpiod);
1043         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1044
1045         ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL;
1046
1047         if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
1048                 qla_printk(KERN_WARNING, ha,
1049                     "Unable to update fw options (beacon off).\n");
1050                 return QLA_FUNCTION_FAILED;
1051         }
1052
1053         if (qla2x00_get_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
1054                 qla_printk(KERN_WARNING, ha,
1055                     "Unable to get fw options (beacon off).\n");
1056                 return QLA_FUNCTION_FAILED;
1057         }
1058
1059         return QLA_SUCCESS;
1060 }
1061
1062
1063 /*
1064  * Flash support routines
1065  */
1066
1067 /**
1068  * qla2x00_flash_enable() - Setup flash for reading and writing.
1069  * @ha: HA context
1070  */
1071 static void
1072 qla2x00_flash_enable(scsi_qla_host_t *ha)
1073 {
1074         uint16_t data;
1075         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1076
1077         data = RD_REG_WORD(&reg->ctrl_status);
1078         data |= CSR_FLASH_ENABLE;
1079         WRT_REG_WORD(&reg->ctrl_status, data);
1080         RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1081 }
1082
1083 /**
1084  * qla2x00_flash_disable() - Disable flash and allow RISC to run.
1085  * @ha: HA context
1086  */
1087 static void
1088 qla2x00_flash_disable(scsi_qla_host_t *ha)
1089 {
1090         uint16_t data;
1091         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1092
1093         data = RD_REG_WORD(&reg->ctrl_status);
1094         data &= ~(CSR_FLASH_ENABLE);
1095         WRT_REG_WORD(&reg->ctrl_status, data);
1096         RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1097 }
1098
1099 /**
1100  * qla2x00_read_flash_byte() - Reads a byte from flash
1101  * @ha: HA context
1102  * @addr: Address in flash to read
1103  *
1104  * A word is read from the chip, but, only the lower byte is valid.
1105  *
1106  * Returns the byte read from flash @addr.
1107  */
1108 static uint8_t
1109 qla2x00_read_flash_byte(scsi_qla_host_t *ha, uint32_t addr)
1110 {
1111         uint16_t data;
1112         uint16_t bank_select;
1113         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1114
1115         bank_select = RD_REG_WORD(&reg->ctrl_status);
1116
1117         if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1118                 /* Specify 64K address range: */
1119                 /*  clear out Module Select and Flash Address bits [19:16]. */
1120                 bank_select &= ~0xf8;
1121                 bank_select |= addr >> 12 & 0xf0;
1122                 bank_select |= CSR_FLASH_64K_BANK;
1123                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1124                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1125
1126                 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1127                 data = RD_REG_WORD(&reg->flash_data);
1128
1129                 return (uint8_t)data;
1130         }
1131
1132         /* Setup bit 16 of flash address. */
1133         if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
1134                 bank_select |= CSR_FLASH_64K_BANK;
1135                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1136                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1137         } else if (((addr & BIT_16) == 0) &&
1138             (bank_select & CSR_FLASH_64K_BANK)) {
1139                 bank_select &= ~(CSR_FLASH_64K_BANK);
1140                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1141                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1142         }
1143
1144         /* Always perform IO mapped accesses to the FLASH registers. */
1145         if (ha->pio_address) {
1146                 uint16_t data2;
1147
1148                 reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
1149                 WRT_REG_WORD_PIO(&reg->flash_address, (uint16_t)addr);
1150                 do {
1151                         data = RD_REG_WORD_PIO(&reg->flash_data);
1152                         barrier();
1153                         cpu_relax();
1154                         data2 = RD_REG_WORD_PIO(&reg->flash_data);
1155                 } while (data != data2);
1156         } else {
1157                 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1158                 data = qla2x00_debounce_register(&reg->flash_data);
1159         }
1160
1161         return (uint8_t)data;
1162 }
1163
1164 /**
1165  * qla2x00_write_flash_byte() - Write a byte to flash
1166  * @ha: HA context
1167  * @addr: Address in flash to write
1168  * @data: Data to write
1169  */
1170 static void
1171 qla2x00_write_flash_byte(scsi_qla_host_t *ha, uint32_t addr, uint8_t data)
1172 {
1173         uint16_t bank_select;
1174         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1175
1176         bank_select = RD_REG_WORD(&reg->ctrl_status);
1177         if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1178                 /* Specify 64K address range: */
1179                 /*  clear out Module Select and Flash Address bits [19:16]. */
1180                 bank_select &= ~0xf8;
1181                 bank_select |= addr >> 12 & 0xf0;
1182                 bank_select |= CSR_FLASH_64K_BANK;
1183                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1184                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1185
1186                 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1187                 RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1188                 WRT_REG_WORD(&reg->flash_data, (uint16_t)data);
1189                 RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1190
1191                 return;
1192         }
1193
1194         /* Setup bit 16 of flash address. */
1195         if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
1196                 bank_select |= CSR_FLASH_64K_BANK;
1197                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1198                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1199         } else if (((addr & BIT_16) == 0) &&
1200             (bank_select & CSR_FLASH_64K_BANK)) {
1201                 bank_select &= ~(CSR_FLASH_64K_BANK);
1202                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1203                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1204         }
1205
1206         /* Always perform IO mapped accesses to the FLASH registers. */
1207         if (ha->pio_address) {
1208                 reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
1209                 WRT_REG_WORD_PIO(&reg->flash_address, (uint16_t)addr);
1210                 WRT_REG_WORD_PIO(&reg->flash_data, (uint16_t)data);
1211         } else {
1212                 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1213                 RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1214                 WRT_REG_WORD(&reg->flash_data, (uint16_t)data);
1215                 RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1216         }
1217 }
1218
1219 /**
1220  * qla2x00_poll_flash() - Polls flash for completion.
1221  * @ha: HA context
1222  * @addr: Address in flash to poll
1223  * @poll_data: Data to be polled
1224  * @man_id: Flash manufacturer ID
1225  * @flash_id: Flash ID
1226  *
1227  * This function polls the device until bit 7 of what is read matches data
1228  * bit 7 or until data bit 5 becomes a 1.  If that hapens, the flash ROM timed
1229  * out (a fatal error).  The flash book recommeds reading bit 7 again after
1230  * reading bit 5 as a 1.
1231  *
1232  * Returns 0 on success, else non-zero.
1233  */
1234 static int
1235 qla2x00_poll_flash(scsi_qla_host_t *ha, uint32_t addr, uint8_t poll_data,
1236     uint8_t man_id, uint8_t flash_id)
1237 {
1238         int status;
1239         uint8_t flash_data;
1240         uint32_t cnt;
1241
1242         status = 1;
1243
1244         /* Wait for 30 seconds for command to finish. */
1245         poll_data &= BIT_7;
1246         for (cnt = 3000000; cnt; cnt--) {
1247                 flash_data = qla2x00_read_flash_byte(ha, addr);
1248                 if ((flash_data & BIT_7) == poll_data) {
1249                         status = 0;
1250                         break;
1251                 }
1252
1253                 if (man_id != 0x40 && man_id != 0xda) {
1254                         if ((flash_data & BIT_5) && cnt > 2)
1255                                 cnt = 2;
1256                 }
1257                 udelay(10);
1258                 barrier();
1259         }
1260         return status;
1261 }
1262
1263 /**
1264  * qla2x00_program_flash_address() - Programs a flash address
1265  * @ha: HA context
1266  * @addr: Address in flash to program
1267  * @data: Data to be written in flash
1268  * @man_id: Flash manufacturer ID
1269  * @flash_id: Flash ID
1270  *
1271  * Returns 0 on success, else non-zero.
1272  */
1273 static int
1274 qla2x00_program_flash_address(scsi_qla_host_t *ha, uint32_t addr, uint8_t data,
1275     uint8_t man_id, uint8_t flash_id)
1276 {
1277         /* Write Program Command Sequence. */
1278         if (IS_OEM_001(ha)) {
1279                 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
1280                 qla2x00_write_flash_byte(ha, 0x555, 0x55);
1281                 qla2x00_write_flash_byte(ha, 0xaaa, 0xa0);
1282                 qla2x00_write_flash_byte(ha, addr, data);
1283         } else {
1284                 if (man_id == 0xda && flash_id == 0xc1) {
1285                         qla2x00_write_flash_byte(ha, addr, data);
1286                         if (addr & 0x7e)
1287                                 return 0;
1288                 } else {
1289                         qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1290                         qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1291                         qla2x00_write_flash_byte(ha, 0x5555, 0xa0);
1292                         qla2x00_write_flash_byte(ha, addr, data);
1293                 }
1294         }
1295
1296         udelay(150);
1297
1298         /* Wait for write to complete. */
1299         return qla2x00_poll_flash(ha, addr, data, man_id, flash_id);
1300 }
1301
1302 /**
1303  * qla2x00_erase_flash() - Erase the flash.
1304  * @ha: HA context
1305  * @man_id: Flash manufacturer ID
1306  * @flash_id: Flash ID
1307  *
1308  * Returns 0 on success, else non-zero.
1309  */
1310 static int
1311 qla2x00_erase_flash(scsi_qla_host_t *ha, uint8_t man_id, uint8_t flash_id)
1312 {
1313         /* Individual Sector Erase Command Sequence */
1314         if (IS_OEM_001(ha)) {
1315                 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
1316                 qla2x00_write_flash_byte(ha, 0x555, 0x55);
1317                 qla2x00_write_flash_byte(ha, 0xaaa, 0x80);
1318                 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
1319                 qla2x00_write_flash_byte(ha, 0x555, 0x55);
1320                 qla2x00_write_flash_byte(ha, 0xaaa, 0x10);
1321         } else {
1322                 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1323                 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1324                 qla2x00_write_flash_byte(ha, 0x5555, 0x80);
1325                 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1326                 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1327                 qla2x00_write_flash_byte(ha, 0x5555, 0x10);
1328         }
1329
1330         udelay(150);
1331
1332         /* Wait for erase to complete. */
1333         return qla2x00_poll_flash(ha, 0x00, 0x80, man_id, flash_id);
1334 }
1335
1336 /**
1337  * qla2x00_erase_flash_sector() - Erase a flash sector.
1338  * @ha: HA context
1339  * @addr: Flash sector to erase
1340  * @sec_mask: Sector address mask
1341  * @man_id: Flash manufacturer ID
1342  * @flash_id: Flash ID
1343  *
1344  * Returns 0 on success, else non-zero.
1345  */
1346 static int
1347 qla2x00_erase_flash_sector(scsi_qla_host_t *ha, uint32_t addr,
1348     uint32_t sec_mask, uint8_t man_id, uint8_t flash_id)
1349 {
1350         /* Individual Sector Erase Command Sequence */
1351         qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1352         qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1353         qla2x00_write_flash_byte(ha, 0x5555, 0x80);
1354         qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1355         qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1356         if (man_id == 0x1f && flash_id == 0x13)
1357                 qla2x00_write_flash_byte(ha, addr & sec_mask, 0x10);
1358         else
1359                 qla2x00_write_flash_byte(ha, addr & sec_mask, 0x30);
1360
1361         udelay(150);
1362
1363         /* Wait for erase to complete. */
1364         return qla2x00_poll_flash(ha, addr, 0x80, man_id, flash_id);
1365 }
1366
1367 /**
1368  * qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip.
1369  * @man_id: Flash manufacturer ID
1370  * @flash_id: Flash ID
1371  */
1372 static void
1373 qla2x00_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
1374     uint8_t *flash_id)
1375 {
1376         qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1377         qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1378         qla2x00_write_flash_byte(ha, 0x5555, 0x90);
1379         *man_id = qla2x00_read_flash_byte(ha, 0x0000);
1380         *flash_id = qla2x00_read_flash_byte(ha, 0x0001);
1381         qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1382         qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1383         qla2x00_write_flash_byte(ha, 0x5555, 0xf0);
1384 }
1385
1386
1387 static inline void
1388 qla2x00_suspend_hba(struct scsi_qla_host *ha)
1389 {
1390         int cnt;
1391         unsigned long flags;
1392         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1393
1394         /* Suspend HBA. */
1395         scsi_block_requests(ha->host);
1396         ha->isp_ops.disable_intrs(ha);
1397         set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1398
1399         /* Pause RISC. */
1400         spin_lock_irqsave(&ha->hardware_lock, flags);
1401         WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
1402         RD_REG_WORD(&reg->hccr);
1403         if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
1404                 for (cnt = 0; cnt < 30000; cnt++) {
1405                         if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) != 0)
1406                                 break;
1407                         udelay(100);
1408                 }
1409         } else {
1410                 udelay(10);
1411         }
1412         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1413 }
1414
1415 static inline void
1416 qla2x00_resume_hba(struct scsi_qla_host *ha)
1417 {
1418         /* Resume HBA. */
1419         clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1420         set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1421         qla2xxx_wake_dpc(ha);
1422         qla2x00_wait_for_hba_online(ha);
1423         scsi_unblock_requests(ha->host);
1424 }
1425
1426 uint8_t *
1427 qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1428     uint32_t offset, uint32_t length)
1429 {
1430         unsigned long flags;
1431         uint32_t addr, midpoint;
1432         uint8_t *data;
1433         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1434
1435         /* Suspend HBA. */
1436         qla2x00_suspend_hba(ha);
1437
1438         /* Go with read. */
1439         spin_lock_irqsave(&ha->hardware_lock, flags);
1440         midpoint = ha->optrom_size / 2;
1441
1442         qla2x00_flash_enable(ha);
1443         WRT_REG_WORD(&reg->nvram, 0);
1444         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
1445         for (addr = offset, data = buf; addr < length; addr++, data++) {
1446                 if (addr == midpoint) {
1447                         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
1448                         RD_REG_WORD(&reg->nvram);       /* PCI Posting. */
1449                 }
1450
1451                 *data = qla2x00_read_flash_byte(ha, addr);
1452         }
1453         qla2x00_flash_disable(ha);
1454         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1455
1456         /* Resume HBA. */
1457         qla2x00_resume_hba(ha);
1458
1459         return buf;
1460 }
1461
1462 int
1463 qla2x00_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1464     uint32_t offset, uint32_t length)
1465 {
1466
1467         int rval;
1468         unsigned long flags;
1469         uint8_t man_id, flash_id, sec_number, data;
1470         uint16_t wd;
1471         uint32_t addr, liter, sec_mask, rest_addr;
1472         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1473
1474         /* Suspend HBA. */
1475         qla2x00_suspend_hba(ha);
1476
1477         rval = QLA_SUCCESS;
1478         sec_number = 0;
1479
1480         /* Reset ISP chip. */
1481         spin_lock_irqsave(&ha->hardware_lock, flags);
1482         WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);
1483         pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
1484
1485         /* Go with write. */
1486         qla2x00_flash_enable(ha);
1487         do {    /* Loop once to provide quick error exit */
1488                 /* Structure of flash memory based on manufacturer */
1489                 if (IS_OEM_001(ha)) {
1490                         /* OEM variant with special flash part. */
1491                         man_id = flash_id = 0;
1492                         rest_addr = 0xffff;
1493                         sec_mask   = 0x10000;
1494                         goto update_flash;
1495                 }
1496                 qla2x00_get_flash_manufacturer(ha, &man_id, &flash_id);
1497                 switch (man_id) {
1498                 case 0x20: /* ST flash. */
1499                         if (flash_id == 0xd2 || flash_id == 0xe3) {
1500                                 /*
1501                                  * ST m29w008at part - 64kb sector size with
1502                                  * 32kb,8kb,8kb,16kb sectors at memory address
1503                                  * 0xf0000.
1504                                  */
1505                                 rest_addr = 0xffff;
1506                                 sec_mask = 0x10000;
1507                                 break;
1508                         }
1509                         /*
1510                          * ST m29w010b part - 16kb sector size
1511                          * Default to 16kb sectors
1512                          */
1513                         rest_addr = 0x3fff;
1514                         sec_mask = 0x1c000;
1515                         break;
1516                 case 0x40: /* Mostel flash. */
1517                         /* Mostel v29c51001 part - 512 byte sector size. */
1518                         rest_addr = 0x1ff;
1519                         sec_mask = 0x1fe00;
1520                         break;
1521                 case 0xbf: /* SST flash. */
1522                         /* SST39sf10 part - 4kb sector size. */
1523                         rest_addr = 0xfff;
1524                         sec_mask = 0x1f000;
1525                         break;
1526                 case 0xda: /* Winbond flash. */
1527                         /* Winbond W29EE011 part - 256 byte sector size. */
1528                         rest_addr = 0x7f;
1529                         sec_mask = 0x1ff80;
1530                         break;
1531                 case 0xc2: /* Macronix flash. */
1532                         /* 64k sector size. */
1533                         if (flash_id == 0x38 || flash_id == 0x4f) {
1534                                 rest_addr = 0xffff;
1535                                 sec_mask = 0x10000;
1536                                 break;
1537                         }
1538                         /* Fall through... */
1539
1540                 case 0x1f: /* Atmel flash. */
1541                         /* 512k sector size. */
1542                         if (flash_id == 0x13) {
1543                                 rest_addr = 0x7fffffff;
1544                                 sec_mask =   0x80000000;
1545                                 break;
1546                         }
1547                         /* Fall through... */
1548
1549                 case 0x01: /* AMD flash. */
1550                         if (flash_id == 0x38 || flash_id == 0x40 ||
1551                             flash_id == 0x4f) {
1552                                 /* Am29LV081 part - 64kb sector size. */
1553                                 /* Am29LV002BT part - 64kb sector size. */
1554                                 rest_addr = 0xffff;
1555                                 sec_mask = 0x10000;
1556                                 break;
1557                         } else if (flash_id == 0x3e) {
1558                                 /*
1559                                  * Am29LV008b part - 64kb sector size with
1560                                  * 32kb,8kb,8kb,16kb sector at memory address
1561                                  * h0xf0000.
1562                                  */
1563                                 rest_addr = 0xffff;
1564                                 sec_mask = 0x10000;
1565                                 break;
1566                         } else if (flash_id == 0x20 || flash_id == 0x6e) {
1567                                 /*
1568                                  * Am29LV010 part or AM29f010 - 16kb sector
1569                                  * size.
1570                                  */
1571                                 rest_addr = 0x3fff;
1572                                 sec_mask = 0x1c000;
1573                                 break;
1574                         } else if (flash_id == 0x6d) {
1575                                 /* Am29LV001 part - 8kb sector size. */
1576                                 rest_addr = 0x1fff;
1577                                 sec_mask = 0x1e000;
1578                                 break;
1579                         }
1580                 default:
1581                         /* Default to 16 kb sector size. */
1582                         rest_addr = 0x3fff;
1583                         sec_mask = 0x1c000;
1584                         break;
1585                 }
1586
1587 update_flash:
1588                 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1589                         if (qla2x00_erase_flash(ha, man_id, flash_id)) {
1590                                 rval = QLA_FUNCTION_FAILED;
1591                                 break;
1592                         }
1593                 }
1594
1595                 for (addr = offset, liter = 0; liter < length; liter++,
1596                     addr++) {
1597                         data = buf[liter];
1598                         /* Are we at the beginning of a sector? */
1599                         if ((addr & rest_addr) == 0) {
1600                                 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1601                                         if (addr >= 0x10000UL) {
1602                                                 if (((addr >> 12) & 0xf0) &&
1603                                                     ((man_id == 0x01 &&
1604                                                         flash_id == 0x3e) ||
1605                                                      (man_id == 0x20 &&
1606                                                          flash_id == 0xd2))) {
1607                                                         sec_number++;
1608                                                         if (sec_number == 1) {
1609                                                                 rest_addr =
1610                                                                     0x7fff;
1611                                                                 sec_mask =
1612                                                                     0x18000;
1613                                                         } else if (
1614                                                             sec_number == 2 ||
1615                                                             sec_number == 3) {
1616                                                                 rest_addr =
1617                                                                     0x1fff;
1618                                                                 sec_mask =
1619                                                                     0x1e000;
1620                                                         } else if (
1621                                                             sec_number == 4) {
1622                                                                 rest_addr =
1623                                                                     0x3fff;
1624                                                                 sec_mask =
1625                                                                     0x1c000;
1626                                                         }
1627                                                 }
1628                                         }
1629                                 } else if (addr == ha->optrom_size / 2) {
1630                                         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
1631                                         RD_REG_WORD(&reg->nvram);
1632                                 }
1633
1634                                 if (flash_id == 0xda && man_id == 0xc1) {
1635                                         qla2x00_write_flash_byte(ha, 0x5555,
1636                                             0xaa);
1637                                         qla2x00_write_flash_byte(ha, 0x2aaa,
1638                                             0x55);
1639                                         qla2x00_write_flash_byte(ha, 0x5555,
1640                                             0xa0);
1641                                 } else if (!IS_QLA2322(ha) && !IS_QLA6322(ha)) {
1642                                         /* Then erase it */
1643                                         if (qla2x00_erase_flash_sector(ha,
1644                                             addr, sec_mask, man_id,
1645                                             flash_id)) {
1646                                                 rval = QLA_FUNCTION_FAILED;
1647                                                 break;
1648                                         }
1649                                         if (man_id == 0x01 && flash_id == 0x6d)
1650                                                 sec_number++;
1651                                 }
1652                         }
1653
1654                         if (man_id == 0x01 && flash_id == 0x6d) {
1655                                 if (sec_number == 1 &&
1656                                     addr == (rest_addr - 1)) {
1657                                         rest_addr = 0x0fff;
1658                                         sec_mask   = 0x1f000;
1659                                 } else if (sec_number == 3 && (addr & 0x7ffe)) {
1660                                         rest_addr = 0x3fff;
1661                                         sec_mask   = 0x1c000;
1662                                 }
1663                         }
1664
1665                         if (qla2x00_program_flash_address(ha, addr, data,
1666                             man_id, flash_id)) {
1667                                 rval = QLA_FUNCTION_FAILED;
1668                                 break;
1669                         }
1670                 }
1671         } while (0);
1672         qla2x00_flash_disable(ha);
1673         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1674
1675         /* Resume HBA. */
1676         qla2x00_resume_hba(ha);
1677
1678         return rval;
1679 }
1680
1681 uint8_t *
1682 qla24xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1683     uint32_t offset, uint32_t length)
1684 {
1685         /* Suspend HBA. */
1686         scsi_block_requests(ha->host);
1687         ha->isp_ops.disable_intrs(ha);
1688         set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1689
1690         /* Go with read. */
1691         qla24xx_read_flash_data(ha, (uint32_t *)buf, offset >> 2, length >> 2);
1692
1693         /* Resume HBA. */
1694         clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1695         ha->isp_ops.enable_intrs(ha);
1696         scsi_unblock_requests(ha->host);
1697
1698         return buf;
1699 }
1700
1701 int
1702 qla24xx_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1703     uint32_t offset, uint32_t length)
1704 {
1705         int rval;
1706
1707         /* Suspend HBA. */
1708         scsi_block_requests(ha->host);
1709         ha->isp_ops.disable_intrs(ha);
1710         set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1711
1712         /* Go with write. */
1713         rval = qla24xx_write_flash_data(ha, (uint32_t *)buf, offset >> 2,
1714             length >> 2);
1715
1716         /* Resume HBA -- RISC reset needed. */
1717         clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1718         set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1719         qla2xxx_wake_dpc(ha);
1720         qla2x00_wait_for_hba_online(ha);
1721         scsi_unblock_requests(ha->host);
1722
1723         return rval;
1724 }